Skip to Content
Last modified by Mengting Qiu on 2025/07/01 15:58
From version 45.1
edited by Saxer Lin
on 2023/05/24 08:55
Change comment: There is no comment for this version
To version 16.3
edited by kai
on 2023/04/23 15:02
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.kai
Content
... ... @@ -1,9 +1,6 @@
1 -(% style="text-align:center" %)
2 -[[image:S31-B.jpg]]
1 +
3 3  
4 4  
5 -
6 -
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -18,24 +18,41 @@
18 18  == 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
18 +(((
19 +The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
20 +)))
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
22 +(((
23 +The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
24 +)))
24 24  
26 +(((
25 25  The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 +)))
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
30 +(((
31 +S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature,**(%%) user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
32 +)))
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34 +(((
35 +S31x-LB has max 3 probes which measure maximum 3 temperature points.
36 +)))
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
38 +(((
39 +S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
40 +)))
32 32  
42 +(((
43 +S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
44 +)))
45 +
46 +(((
33 33  Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
48 +)))
34 34  
35 35  
36 36  == 1.2 ​Features ==
37 37  
38 -
39 39  * LoRaWAN 1.0.3 Class A
40 40  * Ultra-low power consumption
41 41  * External 3 meters SHT31 probe (For S31-LB)
... ... @@ -132,19 +132,12 @@
132 132  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133 133  
134 134  
135 -== 1.7 Pin Definitions ==
149 +== 1.7  Hardware Variant ==
136 136  
137 -[[image:image-20230523174230-1.png]]
138 138  
139 -
140 -== 1.8  Hardware Variant ==
141 -
142 -
143 143  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
144 144  |=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
145 -|(% style="width:102px" %)(((
146 -S31-LB
147 -)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
154 +|(% style="width:102px" %)S31-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
148 148  1 x SHT31 Probe
149 149  
150 150  Cable Length : 2 meters
... ... @@ -151,9 +151,7 @@
151 151  
152 152  
153 153  )))
154 -|(% style="width:102px" %)(((
155 -S31B-LB
156 -)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
161 +|(% style="width:102px" %)S31B-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
157 157  1 x SHT31 Probe
158 158  
159 159  Installed in device.
... ... @@ -163,7 +163,7 @@
163 163  
164 164  
165 165  
166 -== 1.9 Mechanical ==
171 +== 1.8 Mechanical ==
167 167  
168 168  
169 169  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -188,6 +188,7 @@
188 188  
189 189  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
190 190  
196 +
191 191  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192 192  
193 193  
... ... @@ -195,9 +195,10 @@
195 195  
196 196  Each S31x-LB is shipped with a sticker with the default device EUI as below:
197 197  
198 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
204 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220607170145-1.jpeg?rev=1.1||alt="image-20220607170145-1.jpeg"]]
199 199  
200 200  
207 +
201 201  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
202 202  
203 203  
... ... @@ -208,18 +208,18 @@
208 208  
209 209  (% style="color:blue" %)**Add APP EUI and DEV EUI**
210 210  
211 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
218 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="image-20220611161308-4.png"]]
212 212  
213 213  
214 214  (% style="color:blue" %)**Add APP EUI in the application**
215 215  
216 216  
217 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
224 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="image-20220611161308-5.png"]]
218 218  
219 219  
220 220  (% style="color:blue" %)**Add APP KEY**
221 221  
222 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
229 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="image-20220611161308-6.png"]]
223 223  
224 224  
225 225  (% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
... ... @@ -237,7 +237,7 @@
237 237  === 2.3.1 Device Status, FPORT~=5 ===
238 238  
239 239  
240 -Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
247 +Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31-LB will uplink a payload via FPort=5 to server.
241 241  
242 242  The Payload format is as below.
243 243  
... ... @@ -249,7 +249,7 @@
249 249  
250 250  Example parse in TTNv3
251 251  
252 -[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
259 +[[image:image-20230421171614-1.png]]
253 253  
254 254  
255 255  (% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
... ... @@ -315,18 +315,18 @@
315 315  **Size(bytes)**
316 316  )))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
317 317  |(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
318 -[[Battery>>||anchor="HBattery"]]
325 +[[Battery>>||anchor="HBattery:"]]
319 319  )))|(% style="width:130px" %)(((
320 320  [[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
321 321  )))|(% style="width:91px" %)(((
322 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]]
329 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
323 323  )))|(% style="width:103px" %)(((
324 -[[Temperature>>||anchor="HTemperature"]]
331 +[[Temperature>>||anchor="HTemperature:"]]
325 325  )))|(% style="width:80px" %)(((
326 -[[Humidity>>||anchor="HHumidity"]]
333 +[[Humidity>>||anchor="HHumidity:"]]
327 327  )))
328 328  
329 -==== (% style="color:#4472c4" %)**2.3.2.1 Battery**(%%) ====
336 +==== (% style="color:#4472c4" %)**Battery:**(%%) ====
330 330  
331 331  Sensor Battery Level.
332 332  
... ... @@ -336,7 +336,7 @@
336 336  
337 337  
338 338  
339 -==== (% style="color:#4472c4" %)**2.3.2.2 Temperature**(%%) ====
346 +==== (% style="color:#4472c4" %)**Temperature:**(%%) ====
340 340  
341 341  **Example**:
342 342  
... ... @@ -347,13 +347,13 @@
347 347  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
348 348  
349 349  
350 -==== (% style="color:#4472c4" %)**2.3.2.3 Humidity**(%%) ====
357 +==== (% style="color:#4472c4" %)**Humidity:**(%%) ====
351 351  
352 352  
353 353  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
354 354  
355 355  
356 -==== (% style="color:#4472c4" %)**2.3.2.4 Alarm Flag& MOD**(%%) ====
363 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
357 357  
358 358  
359 359  **Example:**
... ... @@ -374,7 +374,7 @@
374 374  
375 375  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
376 376  
377 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
384 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
378 378  
379 379  
380 380  == 2.5 Datalog Feature ==
... ... @@ -386,34 +386,28 @@
386 386  === 2.5.1 Ways to get datalog via LoRaWAN ===
387 387  
388 388  
389 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
396 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
390 390  
391 -* (((
392 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
393 -)))
394 -* (((
395 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
396 -)))
398 +* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
399 +* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
397 397  
398 398  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
399 399  
400 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
403 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
401 401  
402 -
403 403  === 2.5.2 Unix TimeStamp ===
404 404  
405 405  
406 406  S31x-LB uses Unix TimeStamp format based on
407 407  
408 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
410 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
409 409  
410 410  User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
411 411  
412 412  Below is the converter example
413 413  
414 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
416 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
415 415  
416 -
417 417  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
418 418  
419 419  
... ... @@ -422,7 +422,7 @@
422 422  
423 423  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
424 424  
425 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
426 +Once S31-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
426 426  
427 427  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
428 428  
... ... @@ -439,12 +439,12 @@
439 439  **Size(bytes)**
440 440  )))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
441 441  |(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
442 -Temp_Black
443 -)))|(% style="width:51px" %)Temp_White|(% style="width:89px" %)Temp_ Red or Temp _White|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
443 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
444 +)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
444 444  
445 445  **Poll message flag & Ext:**
446 446  
447 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
448 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
448 448  
449 449  **No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
450 450  
... ... @@ -469,9 +469,9 @@
469 469  
470 470  **Example:**
471 471  
472 -If S31x-LB has below data inside Flash:
473 +If S31-LB has below data inside Flash:
473 473  
474 -[[image:1682646494051-944.png]]
475 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
475 475  
476 476  If user sends below downlink command: 3160065F9760066DA705
477 477  
... ... @@ -480,9 +480,9 @@
480 480   Stop time: 60066DA7= time 21/1/19 05:27:03
481 481  
482 482  
483 -**S31x-LB will uplink this payload.**
484 +**S31-LB will uplink this payload.**
484 484  
485 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
486 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
486 486  
487 487  (((
488 488  __**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
... ... @@ -517,7 +517,7 @@
517 517  )))
518 518  
519 519  
520 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
521 +(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
521 521  
522 522  == 2.6 Temperature Alarm Feature ==
523 523  
... ... @@ -525,7 +525,7 @@
525 525  S31x-LB work flow with Alarm feature.
526 526  
527 527  
528 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
529 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
529 529  
530 530  
531 531  == 2.7 Frequency Plans ==
... ... @@ -538,7 +538,7 @@
538 538  
539 539  = 3. Configure S31x-LB =
540 540  
541 -== 3.1 Configure Methods ==
542 +== 3.1 Configure Methods: ==
542 542  
543 543  
544 544  S31x-LB supports below configure method:
... ... @@ -604,9 +604,8 @@
604 604  Sensor will upload Device Status via FPORT=5. See payload section for detail.
605 605  
606 606  
607 -=== 3.3.3 Set Temperature Alarm Threshold ===
608 +=== 3.3.3 Set Temperature Alarm Threshold: ===
608 608  
609 -
610 610  * (% style="color:blue" %)**AT Command:**
611 611  
612 612  (% style="color:#037691" %)**AT+SHTEMP=min,max**
... ... @@ -626,9 +626,8 @@
626 626  (% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
627 627  
628 628  
629 -=== 3.3.4 Set Humidity Alarm Threshold ===
629 +=== 3.3.4 Set Humidity Alarm Threshold: ===
630 630  
631 -
632 632  * (% style="color:blue" %)**AT Command:**
633 633  
634 634  (% style="color:#037691" %)**AT+SHHUM=min,max**
... ... @@ -648,9 +648,8 @@
648 648  (% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
649 649  
650 650  
651 -=== 3.3.5 Set Alarm Interval ===
650 +=== 3.3.5 Set Alarm Interval: ===
652 652  
653 -
654 654  The shortest time of two Alarm packet. (unit: min)
655 655  
656 656  * (% style="color:blue" %)**AT Command:**
... ... @@ -662,7 +662,7 @@
662 662  (% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
663 663  
664 664  
665 -=== 3.3.6 Get Alarm settings ===
663 +=== 3.3.6 Get Alarm settings: ===
666 666  
667 667  
668 668  Send a LoRaWAN downlink to ask device send Alarm settings.
... ... @@ -678,10 +678,10 @@
678 678  
679 679  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
680 680  
681 -=== 3.3.7 Set Interrupt Mode ===
679 +=== 3.3.7 Set Interrupt Mode: ===
682 682  
683 683  
684 -Feature, Set Interrupt mode for PA8 of pin.
682 +Feature, Set Interrupt mode for GPIO_EXIT.
685 685  
686 686  (% style="color:blue" %)**AT Command: AT+INTMOD**
687 687  
... ... @@ -709,43 +709,15 @@
709 709  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
710 710  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
711 711  
712 -=== 3.3.8 Set Power Output Duration ===
710 += 4. Battery & Power Consumption: =
713 713  
714 714  
715 -Control the output duration 5V . Before each sampling, device will
716 -
717 -~1. first enable the power output to external sensor,
718 -
719 -2. keep it on as per duration, read sensor value and construct uplink payload
720 -
721 -3. final, close the power output.
722 -
723 -(% style="color:blue" %)**AT Command: AT+5VT**
724 -
725 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
726 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
727 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
728 -OK
729 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
730 -
731 -(% style="color:blue" %)**Downlink Command: 0x07**
732 -
733 -Format: Command Code (0x07) followed by 2 bytes.
734 -
735 -The first and second bytes are the time to turn on.
736 -
737 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
738 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
739 -
740 -= 4. Battery & Power Consumption =
741 -
742 -
743 743  S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
744 744  
745 745  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
746 746  
747 747  
748 -= 5. OTA Firmware update =
718 += 5. OTA Firmware update: =
749 749  
750 750  
751 751  (% class="wikigeneratedid" %)
... ... @@ -755,13 +755,13 @@
755 755  * Update with new features.
756 756  * Fix bugs.
757 757  
758 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
728 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
759 759  
760 760  
761 761  Methods to Update Firmware:
762 762  
763 -* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
764 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
733 +* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
734 +* Update through UART TTL interface. **[[Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
765 765  
766 766  = 6. FAQ =
767 767  
... ... @@ -770,7 +770,7 @@
770 770  = 7. Order Info =
771 771  
772 772  
773 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
743 +Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
774 774  
775 775  (% style="color:red" %)**XX**(%%): The default frequency band
776 776  
... ... @@ -812,4 +812,4 @@
812 812  
813 813  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
814 814  
815 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
785 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1682646494051-944.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -206.9 KB
Content
S31-B.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -28.3 KB
Content
S31.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -58.7 KB
Content
S31B.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content
image-20230426084152-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content
image-20230523174230-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -605.9 KB
Content