Skip to Content
Last modified by Mengting Qiu on 2025/08/14 17:09
From version 44.2
edited by Saxer Lin
on 2023/05/23 17:57
Change comment: There is no comment for this version
To version 73.5
edited by Xiaoling
on 2024/01/04 16:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
1 +S31/S31B-LB/LS -- LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Xiaoling
Content
... ... @@ -1,9 +1,14 @@
1 + (% style="display:none" %) (%%) (% style="display:none" %) (%%) (% style="display:none" %)
2 +
1 1  (% style="text-align:center" %)
2 -[[image:S31-B.jpg]]
4 +[[image:image-20240104162316-6.png]]
3 3  
4 4  
5 5  
6 6  
9 +
10 +
11 +
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -15,22 +15,22 @@
15 15  
16 16  = 1. Introduction =
17 17  
18 -== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
23 +== 1.1 What is S31x-LB/LS LoRaWAN Temperature & Humidity Sensor ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
26 +The Dragino S31x-LB/LS is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
28 +The temperature & humidity sensor used in S31x-LB/LS is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
24 24  
25 -The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
30 +The LoRa wireless technology used in S31x-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
32 +S31x-LB/LS supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB/LS supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34 +S31x-LB/LS (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
36 +S31x-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%) or (% style="color:blue" %)**solar powered + li-on battery**(%%) it is designed for long term use up to 5 years.
32 32  
33 -Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
38 +Each S31x-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 34  
35 35  
36 36  == 1.2 ​Features ==
... ... @@ -39,7 +39,7 @@
39 39  * LoRaWAN 1.0.3 Class A
40 40  * Ultra-low power consumption
41 41  * External 3 meters SHT31 probe (For S31-LB)
42 -* Measure range -55°C ~~ 125°C
47 +* Measure range -40°C ~~ 80°C
43 43  * Temperature & Humidity alarm
44 44  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
45 45  * Support Bluetooth v5.1 and LoRaWAN remote configure
... ... @@ -46,7 +46,8 @@
46 46  * Support wireless OTA update firmware
47 47  * Uplink on periodically
48 48  * Downlink to change configure
49 -* 8500mAh Battery for long term use
54 +* 88500mAh Li/SOCl2 Battery (S31/S31B-LB)
55 +* Solar panel + 3000mAh Li-on battery (S31/S31B-LS)
50 50  
51 51  == 1.3 Specification ==
52 52  
... ... @@ -53,7 +53,7 @@
53 53  
54 54  (% style="color:#037691" %)**Common DC Characteristics:**
55 55  
56 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
62 +* Supply Voltage: Built-in Battery , 2.5v ~~ 3.6v
57 57  * Operating Temperature: -40 ~~ 85°C
58 58  
59 59  (% style="color:#037691" %)**Temperature Sensor:**
... ... @@ -120,7 +120,7 @@
120 120  == 1.6 BLE connection ==
121 121  
122 122  
123 -S31x-LB support BLE remote configure.
129 +S31x-LB/LS support BLE remote configure.
124 124  
125 125  
126 126  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -134,18 +134,17 @@
134 134  
135 135  == 1.7 Pin Definitions ==
136 136  
137 -[[image:image-20230523174230-1.png]]
143 +[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20230610163213-1.png?width=699&height=404&rev=1.1||alt="image-20230610163213-1.png"]]
138 138  
139 -== ==
140 140  
141 -== 1.8  Hardware Variant ==
146 +== 1.8 Hardware Variant ==
142 142  
143 143  
144 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
145 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
149 +(% border="1" cellspacing="5" style="width:461.818px" %)
150 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 182px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Photo|=(% style="width: 176px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Probe Info
146 146  |(% style="width:102px" %)(((
147 147  S31-LB
148 -)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
153 +)))|(% style="width:182px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:176px" %)(((
149 149  1 x SHT31 Probe
150 150  
151 151  Cable Length : 2 meters
... ... @@ -154,7 +154,7 @@
154 154  )))
155 155  |(% style="width:102px" %)(((
156 156  S31B-LB
157 -)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
162 +)))|(% style="width:182px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:176px" %)(((
158 158  1 x SHT31 Probe
159 159  
160 160  Installed in device.
... ... @@ -176,12 +176,12 @@
176 176  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
177 177  
178 178  
179 -= 2. Configure S31x-LB to connect to LoRaWAN network =
184 += 2. Configure S31x-LB/LS to connect to LoRaWAN network =
180 180  
181 181  == 2.1 How it works ==
182 182  
183 183  
184 -The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
189 +The S31x-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
185 185  
186 186  
187 187  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -192,9 +192,9 @@
192 192  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
193 193  
194 194  
195 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
200 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB/LS.
196 196  
197 -Each S31x-LB is shipped with a sticker with the default device EUI as below:
202 +Each S31x-LB/LS is shipped with a sticker with the default device EUI as below:
198 198  
199 199  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
200 200  
... ... @@ -223,10 +223,10 @@
223 223  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
224 224  
225 225  
226 -(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
231 +(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB/LS
227 227  
228 228  
229 -Press the button for 5 seconds to activate the S31x-LB.
234 +Press the button for 5 seconds to activate the S31x-LB/LS.
230 230  
231 231  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
232 232  
... ... @@ -238,7 +238,7 @@
238 238  === 2.3.1 Device Status, FPORT~=5 ===
239 239  
240 240  
241 -Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
246 +Users can use the downlink command(**0x26 01**) to ask S31x-LB/LS to send device configure detail, include device configure status. S31x-LB/LS will uplink a payload via FPort=5 to server.
242 242  
243 243  The Payload format is as below.
244 244  
... ... @@ -250,42 +250,42 @@
250 250  
251 251  Example parse in TTNv3
252 252  
253 -[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
258 +[[image:image-20230524144422-1.png||height="174" width="1080"]]
254 254  
255 255  
256 -(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
261 +(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB/LS, this value is 0x0A
257 257  
258 258  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
259 259  
260 260  (% style="color:#037691" %)**Frequency Band**:
261 261  
262 -*0x01: EU868
267 +0x01: EU868
263 263  
264 -*0x02: US915
269 +0x02: US915
265 265  
266 -*0x03: IN865
271 +0x03: IN865
267 267  
268 -*0x04: AU915
273 +0x04: AU915
269 269  
270 -*0x05: KZ865
275 +0x05: KZ865
271 271  
272 -*0x06: RU864
277 +0x06: RU864
273 273  
274 -*0x07: AS923
279 +0x07: AS923
275 275  
276 -*0x08: AS923-1
281 +0x08: AS923-1
277 277  
278 -*0x09: AS923-2
283 +0x09: AS923-2
279 279  
280 -*0x0a: AS923-3
285 +0x0a: AS923-3
281 281  
282 -*0x0b: CN470
287 +0x0b: CN470
283 283  
284 -*0x0c: EU433
289 +0x0c: EU433
285 285  
286 -*0x0d: KR920
291 +0x0d: KR920
287 287  
288 -*0x0e: MA869
293 +0x0e: MA869
289 289  
290 290  
291 291  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -312,23 +312,26 @@
312 312  Sensor Data is uplink via FPORT=2
313 313  
314 314  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
315 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
320 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
316 316  **Size(bytes)**
317 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
318 -|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
319 -[[Battery>>||anchor="HBattery"]]
322 +)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
323 +|(% style="width:99px" %)Value|(% style="width:69px" %)(((
324 +Battery
320 320  )))|(% style="width:130px" %)(((
321 -[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
322 -)))|(% style="width:91px" %)(((
323 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]]
324 -)))|(% style="width:103px" %)(((
325 -[[Temperature>>||anchor="HTemperature"]]
326 -)))|(% style="width:80px" %)(((
327 -[[Humidity>>||anchor="HHumidity"]]
326 +Unix TimeStamp
327 +)))|(% style="width:194px" %)(((
328 +Alarm Flag & MOD& Level of PA8
329 +)))|(% style="width:106px" %)(((
330 +Temperature
331 +)))|(% style="width:97px" %)(((
332 +Humidity
328 328  )))
329 329  
330 -==== (% style="color:#4472c4" %)**2.3.2.1 Battery**(%%) ====
335 +[[image:image-20230524144456-2.png||height="180" width="1142"]]
331 331  
337 +
338 +==== (% style="color:#4472c4" %)**Battery**(%%) ====
339 +
332 332  Sensor Battery Level.
333 333  
334 334  Ex1: 0x0B45 = 2885mV
... ... @@ -336,9 +336,8 @@
336 336  Ex2: 0x0B49 = 2889mV
337 337  
338 338  
347 +==== (% style="color:#4472c4" %)**Temperature**(%%) ====
339 339  
340 -==== (% style="color:#4472c4" %)**2.3.2.2 Temperature**(%%) ====
341 -
342 342  **Example**:
343 343  
344 344  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
... ... @@ -345,26 +345,30 @@
345 345  
346 346  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
347 347  
348 -（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
355 +(FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
349 349  
350 350  
351 -==== (% style="color:#4472c4" %)**2.3.2.3 Humidity**(%%) ====
358 +==== (% style="color:#4472c4" %)**Humidity**(%%) ====
352 352  
353 353  
354 354  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
355 355  
356 356  
357 -==== (% style="color:#4472c4" %)**2.3.2.4 Alarm Flag& MOD**(%%) ====
364 +==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
358 358  
359 359  
360 360  **Example:**
361 361  
362 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
369 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
363 363  
364 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
371 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
365 365  
366 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
373 +If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
367 367  
375 +If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
376 +
377 +If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
378 +
368 368  If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
369 369  
370 370  
... ... @@ -381,19 +381,19 @@
381 381  == 2.5 Datalog Feature ==
382 382  
383 383  
384 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
395 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB/LS will store the reading for future retrieving purposes.
385 385  
386 386  
387 387  === 2.5.1 Ways to get datalog via LoRaWAN ===
388 388  
389 389  
390 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
401 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB/LS will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB/LS will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
391 391  
392 392  * (((
393 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
404 +a) S31x-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
394 394  )))
395 395  * (((
396 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
407 +b) S31x-LB/LS will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB/LS gets a ACK, S31x-LB/LS will consider there is a network connection and resend all NONE-ACK messages.
397 397  )))
398 398  
399 399  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -404,7 +404,7 @@
404 404  === 2.5.2 Unix TimeStamp ===
405 405  
406 406  
407 -S31x-LB uses Unix TimeStamp format based on
418 +S31x-LB/LS uses Unix TimeStamp format based on
408 408  
409 409  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
410 410  
... ... @@ -423,7 +423,7 @@
423 423  
424 424  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
425 425  
426 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
437 +Once S31x-LB/LS Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB/LS. If S31x-LB/LS fails to get the time from the server, S31x-LB/LS will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
427 427  
428 428  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
429 429  
... ... @@ -435,18 +435,31 @@
435 435  
436 436  **Retrieval data payload:**
437 437  
438 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
439 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
449 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
450 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
440 440  **Size(bytes)**
441 -)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
442 -|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
443 -Temp_Black
444 -)))|(% style="width:51px" %)Temp_White|(% style="width:89px" %)Temp_ Red or Temp _White|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
452 +)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
453 +|(% style="width:103px" %)Value|(% style="width:68px" %)(((
454 +ignore
455 +)))|(% style="width:104px" %)(((
456 +(((
457 +Humidity
458 +)))
445 445  
446 -**Poll message flag & Ext:**
460 +(((
461 +
462 +)))
463 +)))|(% style="width:87px" %)(((
464 +Temperature
465 +)))|(% style="width:178px" %)(((
466 +Poll message flag & Alarm Flag& Level of PA8
467 +)))|(% style="width:137px" %)Unix Time Stamp
447 447  
448 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
469 +**Poll message flag & Alarm Flag & Level of PA8:**
449 449  
471 +[[image:image-20230524114302-1.png||height="115" width="736"]]
472 +
473 +
450 450  **No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
451 451  
452 452  **Poll Message Flag**: 1: This message is a poll message reply.
... ... @@ -467,26 +467,26 @@
467 467  
468 468  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
469 469  
470 -
471 471  **Example:**
472 472  
473 -If S31x-LB has below data inside Flash:
496 +If S31x-LB/LS has below data inside Flash:
474 474  
475 -[[image:1682646494051-944.png]]
498 +[[image:image-20230524114654-2.png]]
476 476  
477 -If user sends below downlink command: 3160065F9760066DA705
478 478  
479 -Where : Start time: 60065F97 = time 21/1/19 04:27:03
501 +If user sends below downlink command: 31646D84E1646D856C05
480 480  
481 - Stop time: 60066DA7= time 21/1/19 05:27:03
503 +Where : Start time: 646D84E1 = time 23/5/24 03:30:41
482 482  
505 + Stop time: 646D856C= time 23/5/24 03:33:00
483 483  
484 -**S31x-LB will uplink this payload.**
485 485  
486 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
508 +**S31x-LB/LS will uplink this payload.**
487 487  
510 +[[image:image-20230524114826-3.png||height="448" width="1244"]]
511 +
488 488  (((
489 -__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
513 +00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
490 490  )))
491 491  
492 492  (((
... ... @@ -494,55 +494,58 @@
494 494  )))
495 495  
496 496  (((
497 -7FFF089801464160065F97
521 +00 00 02 36 01 10 40 64 6D 84 E1
498 498  )))
499 499  
500 500  (((
501 -**Ext sensor data**=0x7FFF/100=327.67
525 +**Hum**=0x0236/10=56.6
502 502  )))
503 503  
504 504  (((
505 -**Temp**=0x088E/100=22.00
529 +**Temp**=0x0110/10=27.2
506 506  )))
507 507  
508 508  (((
509 -**Hum**=0x014B/10=32.6
533 +**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
510 510  )))
511 511  
512 512  (((
513 -**poll message flag & Ext**=0x41,means reply data,Ext=1
537 +**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
514 514  )))
515 515  
516 -(((
517 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
518 -)))
519 519  
520 -
521 521  (% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
522 522  
523 523  == 2.6 Temperature Alarm Feature ==
524 524  
525 525  
526 -S31x-LB work flow with Alarm feature.
546 +S31x-LB/LS work flow with Alarm feature.
527 527  
528 528  
529 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
549 +[[image:image-20230524110125-3.png||height="768" width="1115"]]
530 530  
531 531  
552 +
532 532  == 2.7 Frequency Plans ==
533 533  
534 534  
535 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
556 +The S31x-LB/LS uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
536 536  
537 537  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
538 538  
539 539  
540 -= 3. Configure S31x-LB =
561 +== 2.8 ​Firmware Change Log ==
541 541  
563 +
564 +**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
565 +
566 +
567 += 3. Configure S31x-LB/LS =
568 +
542 542  == 3.1 Configure Methods ==
543 543  
544 544  
545 -S31x-LB supports below configure method:
572 +S31x-LB/LS supports below configure method:
546 546  
547 547  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
548 548  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -561,10 +561,10 @@
561 561  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
562 562  
563 563  
564 -== 3.3 Commands special design for S31x-LB ==
591 +== 3.3 Commands special design for S31x-LB/LS ==
565 565  
566 566  
567 -These commands only valid for S31x-LB, as below:
594 +These commands only valid for S31x-LB/LS, as below:
568 568  
569 569  
570 570  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -575,7 +575,7 @@
575 575  (% style="color:blue" %)**AT Command: AT+TDC**
576 576  
577 577  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
578 -|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
605 +|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
579 579  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
580 580  30000
581 581  OK
... ... @@ -672,9 +672,8 @@
672 672  
673 673  **Example:**
674 674  
675 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
702 +[[image:image-20230524110211-4.png]]
676 676  
677 -
678 678  **Explain:**
679 679  
680 680  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
... ... @@ -684,10 +684,12 @@
684 684  
685 685  Feature, Set Interrupt mode for PA8 of pin.
686 686  
713 +When AT+INTMOD=0 is set, PA8 is used as a digital input port.
714 +
687 687  (% style="color:blue" %)**AT Command: AT+INTMOD**
688 688  
689 689  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
690 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
718 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
691 691  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
692 692  0
693 693  OK
... ... @@ -710,8 +710,6 @@
710 710  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
711 711  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
712 712  
713 -=== ===
714 -
715 715  === 3.3.8 Set Power Output Duration ===
716 716  
717 717  
... ... @@ -726,10 +726,10 @@
726 726  (% style="color:blue" %)**AT Command: AT+5VT**
727 727  
728 728  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
729 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
755 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
730 730  |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
731 731  OK
732 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
758 +|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
733 733  
734 734  (% style="color:blue" %)**Downlink Command: 0x07**
735 735  
... ... @@ -740,12 +740,10 @@
740 740  * Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
741 741  * Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
742 742  
743 -= =
744 -
745 745  = 4. Battery & Power Consumption =
746 746  
747 747  
748 -S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
772 +S31x-LB use ER26500 + SPC1520 battery pack and S31x-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
749 749  
750 750  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
751 751  
... ... @@ -754,19 +754,19 @@
754 754  
755 755  
756 756  (% class="wikigeneratedid" %)
757 -User can change firmware S31x-LB to:
781 +User can change firmware S31x-LB/LS to:
758 758  
759 759  * Change Frequency band/ region.
760 760  * Update with new features.
761 761  * Fix bugs.
762 762  
763 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
787 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]**
764 764  
765 765  
766 766  Methods to Update Firmware:
767 767  
768 -* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
769 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
792 +* (Recommanded way) OTA firmware update via wireless : **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
793 +* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
770 770  
771 771  = 6. FAQ =
772 772  
... ... @@ -775,7 +775,7 @@
775 775  = 7. Order Info =
776 776  
777 777  
778 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
802 +Part Number: (% style="color:blue" %)**S31-LB-XX / S31B-LB-XX**(%%)**  or  (% style="color:blue" %)S31-LS-XX / S31B-LS-XX(%%)**
779 779  
780 780  (% style="color:red" %)**XX**(%%): The default frequency band
781 781  
... ... @@ -800,7 +800,7 @@
800 800  
801 801  (% style="color:#037691" %)**Package Includes**:
802 802  
803 -* S31x-LB LoRaWAN Temperature & Humidity Sensor
827 +* S31x-LB or S31x-LS LoRaWAN Temperature & Humidity Sensor
804 804  
805 805  (% style="color:#037691" %)**Dimension and weight**:
806 806  
image-20230524105433-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +121.4 KB
Content
image-20230524105747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +223.2 KB
Content
image-20230524110125-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +194.1 KB
Content
image-20230524110211-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20230524114302-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +12.0 KB
Content
image-20230524114654-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +17.8 KB
Content
image-20230524114826-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +82.3 KB
Content
image-20230524144422-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +34.9 KB
Content
image-20230524144456-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +33.9 KB
Content
image-20230527093155-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.3 KB
Content
image-20230527093214-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20230610163920-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +695.8 KB
Content
image-20231127154814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +107.6 KB
Content
image-20240104161116-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +396.1 KB
Content
image-20240104161535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +347.3 KB
Content
image-20240104161736-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +141.0 KB
Content
image-20240104162020-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +453.8 KB
Content
image-20240104162104-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +239.6 KB
Content
image-20240104162316-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +284.3 KB
Content