Last modified by Mengting Qiu on 2025/07/01 15:58
Summary
-
Page properties (2 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 6 removed)
Details
- Page properties
-
- Author
-
... ... @@ -1,1 +1,1 @@ 1 -XWiki. Saxer1 +XWiki.kai - Content
-
... ... @@ -1,9 +1,6 @@ 1 -(% style="text-align:center" %) 2 -[[image:S31-B.jpg]] 1 + 3 3 4 4 5 - 6 - 7 7 **Table of Contents:** 8 8 9 9 {{toc/}} ... ... @@ -18,24 +18,41 @@ 18 18 == 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor == 19 19 20 20 21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol. 18 +((( 19 +The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol. 20 +))) 22 22 23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use. 22 +((( 23 +The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use. 24 +))) 24 24 26 +((( 25 25 The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. 28 +))) 26 26 27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover. 30 +((( 31 +S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature,**(%%) user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover. 32 +))) 28 28 29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use. 34 +((( 35 +S31x-LB has max 3 probes which measure maximum 3 temperature points. 36 +))) 30 30 31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years. 38 +((( 39 +S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use. 40 +))) 32 32 42 +((( 43 +S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years. 44 +))) 45 + 46 +((( 33 33 Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on. 48 +))) 34 34 35 35 36 36 == 1.2 Features == 37 37 38 - 39 39 * LoRaWAN 1.0.3 Class A 40 40 * Ultra-low power consumption 41 41 * External 3 meters SHT31 probe (For S31-LB) ... ... @@ -132,20 +132,12 @@ 132 132 If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode. 133 133 134 134 135 -== 1.7 Pin Definitions==149 +== 1.7 Hardware Variant == 136 136 137 -[[image:image-20230523174230-1.png]] 138 138 139 -== == 140 - 141 -== 1.8 Hardware Variant == 142 - 143 - 144 144 (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %) 145 145 |=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info 146 -|(% style="width:102px" %)((( 147 -S31-LB 148 -)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)((( 154 +|(% style="width:102px" %)S31-LB|(% style="width:190px" %) |(% style="width:297px" %)((( 149 149 1 x SHT31 Probe 150 150 151 151 Cable Length : 2 meters ... ... @@ -152,9 +152,7 @@ 152 152 153 153 154 154 ))) 155 -|(% style="width:102px" %)((( 156 -S31B-LB 157 -)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)((( 161 +|(% style="width:102px" %)S31B-LB|(% style="width:190px" %) |(% style="width:297px" %)((( 158 158 1 x SHT31 Probe 159 159 160 160 Installed in device. ... ... @@ -164,7 +164,7 @@ 164 164 165 165 166 166 167 -== 1. 9Mechanical ==171 +== 1.8 Mechanical == 168 168 169 169 170 170 [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]] ... ... @@ -189,6 +189,7 @@ 189 189 190 190 Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example. 191 191 196 + 192 192 The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server. 193 193 194 194 ... ... @@ -196,9 +196,10 @@ 196 196 197 197 Each S31x-LB is shipped with a sticker with the default device EUI as below: 198 198 199 -[[image:i mage-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]204 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220607170145-1.jpeg?rev=1.1||alt="image-20220607170145-1.jpeg"]] 200 200 201 201 207 + 202 202 You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot: 203 203 204 204 ... ... @@ -209,18 +209,18 @@ 209 209 210 210 (% style="color:blue" %)**Add APP EUI and DEV EUI** 211 211 212 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt=" 图片-20220611161308-4.png"]]218 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="image-20220611161308-4.png"]] 213 213 214 214 215 215 (% style="color:blue" %)**Add APP EUI in the application** 216 216 217 217 218 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt=" 图片-20220611161308-5.png"]]224 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="image-20220611161308-5.png"]] 219 219 220 220 221 221 (% style="color:blue" %)**Add APP KEY** 222 222 223 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt=" 图片-20220611161308-6.png"]]229 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="image-20220611161308-6.png"]] 224 224 225 225 226 226 (% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB ... ... @@ -238,7 +238,7 @@ 238 238 === 2.3.1 Device Status, FPORT~=5 === 239 239 240 240 241 -Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31 x-LB will uplink a payload via FPort=5 to server.247 +Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31-LB will uplink a payload via FPort=5 to server. 242 242 243 243 The Payload format is as below. 244 244 ... ... @@ -250,7 +250,7 @@ 250 250 251 251 Example parse in TTNv3 252 252 253 -[[image:image-20230421171614-1.png ||alt="图片-20230421171614-1.png"]]259 +[[image:image-20230421171614-1.png]] 254 254 255 255 256 256 (% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A ... ... @@ -316,18 +316,18 @@ 316 316 **Size(bytes)** 317 317 )))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2 318 318 |(% style="width:99px" %)**Value**|(% style="width:69px" %)((( 319 -[[Battery>>||anchor="HBattery"]] 325 +[[Battery>>||anchor="HBattery:"]] 320 320 )))|(% style="width:130px" %)((( 321 321 [[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]] 322 322 )))|(% style="width:91px" %)((( 323 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]] 329 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]] 324 324 )))|(% style="width:103px" %)((( 325 -[[Temperature>>||anchor="HTemperature"]] 331 +[[Temperature>>||anchor="HTemperature:"]] 326 326 )))|(% style="width:80px" %)((( 327 -[[Humidity>>||anchor="HHumidity"]] 333 +[[Humidity>>||anchor="HHumidity:"]] 328 328 ))) 329 329 330 -==== (% style="color:#4472c4" %)** 2.3.2.1Battery**(%%) ====336 +==== (% style="color:#4472c4" %)**Battery:**(%%) ==== 331 331 332 332 Sensor Battery Level. 333 333 ... ... @@ -337,7 +337,7 @@ 337 337 338 338 339 339 340 -==== (% style="color:#4472c4" %)** 2.3.2.2Temperature**(%%) ====346 +==== (% style="color:#4472c4" %)**Temperature:**(%%) ==== 341 341 342 342 **Example**: 343 343 ... ... @@ -348,13 +348,13 @@ 348 348 (FF3F & 8000:Judge whether the highest bit is 1, when the highest bit is 1, it is negative) 349 349 350 350 351 -==== (% style="color:#4472c4" %)** 2.3.2.3Humidity**(%%) ====357 +==== (% style="color:#4472c4" %)**Humidity:**(%%) ==== 352 352 353 353 354 354 Read:0x(0197)=412 Value: 412 / 10=41.2, So 41.2% 355 355 356 356 357 -==== (% style="color:#4472c4" %)** 2.3.2.4Alarm Flag& MOD**(%%) ====363 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ==== 358 358 359 359 360 360 **Example:** ... ... @@ -375,7 +375,7 @@ 375 375 376 376 In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from: 377 377 378 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31 -LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]384 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]] 379 379 380 380 381 381 == 2.5 Datalog Feature == ... ... @@ -387,34 +387,28 @@ 387 387 === 2.5.1 Ways to get datalog via LoRaWAN === 388 388 389 389 390 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery. 396 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery. 391 391 392 -* ((( 393 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server. 394 -))) 395 -* ((( 396 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages. 397 -))) 398 +* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server. 399 +* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages. 398 398 399 399 Below is the typical case for the auto-update datalog feature (Set PNACKMD=1) 400 400 401 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt=" 图片-20220703111700-2.png" height="381" width="1119"]]403 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]] 402 402 403 - 404 404 === 2.5.2 Unix TimeStamp === 405 405 406 406 407 407 S31x-LB uses Unix TimeStamp format based on 408 408 409 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt=" 图片-20220523001219-11.png" height="97" width="627"]]410 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]] 410 410 411 411 User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] : 412 412 413 413 Below is the converter example 414 414 415 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt=" 图片-20220523001219-12.png" height="298" width="720"]]416 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]] 416 416 417 - 418 418 So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25 419 419 420 420 ... ... @@ -423,7 +423,7 @@ 423 423 424 424 User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command. 425 425 426 -Once S31 x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).426 +Once S31-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days). 427 427 428 428 (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.** 429 429 ... ... @@ -440,12 +440,12 @@ 440 440 **Size(bytes)** 441 441 )))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4** 442 442 |(% style="width:103px" %)**Value**|(% style="width:54px" %)((( 443 -Temp_Black 444 -)))|(% style="width:51px" %)Temp_White|(% style="width:89px" %)Temp_ Red or Temp _White|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]] 443 +[[Temp_Black>>||anchor="HTemperatureBlack:"]] 444 +)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]] 445 445 446 446 **Poll message flag & Ext:** 447 447 448 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt=" 图片-20221006192726-1.png" height="112" width="754"]]448 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]] 449 449 450 450 **No ACK Message**: 1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature) 451 451 ... ... @@ -470,9 +470,9 @@ 470 470 471 471 **Example:** 472 472 473 -If S31 x-LB has below data inside Flash:473 +If S31-LB has below data inside Flash: 474 474 475 -[[image: 1682646494051-944.png]]475 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]] 476 476 477 477 If user sends below downlink command: 3160065F9760066DA705 478 478 ... ... @@ -481,9 +481,9 @@ 481 481 Stop time: 60066DA7= time 21/1/19 05:27:03 482 482 483 483 484 -**S31 x-LB will uplink this payload.**484 +**S31-LB will uplink this payload.** 485 485 486 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt=" 图片-20220523001219-13.png" height="421" width="727"]]486 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]] 487 487 488 488 ((( 489 489 __**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E ... ... @@ -518,7 +518,7 @@ 518 518 ))) 519 519 520 520 521 -(% aria-label=" 数据URI图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片"data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据URI图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片"draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据URI图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据URI图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片"data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据URI图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片"draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据URI图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的521 +(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %) 522 522 523 523 == 2.6 Temperature Alarm Feature == 524 524 ... ... @@ -526,7 +526,7 @@ 526 526 S31x-LB work flow with Alarm feature. 527 527 528 528 529 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt=" 图片-20220623090437-1.png"]]529 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]] 530 530 531 531 532 532 == 2.7 Frequency Plans == ... ... @@ -539,7 +539,7 @@ 539 539 540 540 = 3. Configure S31x-LB = 541 541 542 -== 3.1 Configure Methods == 542 +== 3.1 Configure Methods: == 543 543 544 544 545 545 S31x-LB supports below configure method: ... ... @@ -605,9 +605,8 @@ 605 605 Sensor will upload Device Status via FPORT=5. See payload section for detail. 606 606 607 607 608 -=== 3.3.3 Set Temperature Alarm Threshold === 608 +=== 3.3.3 Set Temperature Alarm Threshold: === 609 609 610 - 611 611 * (% style="color:blue" %)**AT Command:** 612 612 613 613 (% style="color:#037691" %)**AT+SHTEMP=min,max** ... ... @@ -627,9 +627,8 @@ 627 627 (% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)** 628 628 629 629 630 -=== 3.3.4 Set Humidity Alarm Threshold === 629 +=== 3.3.4 Set Humidity Alarm Threshold: === 631 631 632 - 633 633 * (% style="color:blue" %)**AT Command:** 634 634 635 635 (% style="color:#037691" %)**AT+SHHUM=min,max** ... ... @@ -649,9 +649,8 @@ 649 649 (% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))** 650 650 651 651 652 -=== 3.3.5 Set Alarm Interval === 650 +=== 3.3.5 Set Alarm Interval: === 653 653 654 - 655 655 The shortest time of two Alarm packet. (unit: min) 656 656 657 657 * (% style="color:blue" %)**AT Command:** ... ... @@ -663,7 +663,7 @@ 663 663 (% style="color:#037691" %)**0x(0D 00 1E)**(%%) **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes 664 664 665 665 666 -=== 3.3.6 Get Alarm settings === 663 +=== 3.3.6 Get Alarm settings: === 667 667 668 668 669 669 Send a LoRaWAN downlink to ask device send Alarm settings. ... ... @@ -679,10 +679,10 @@ 679 679 680 680 * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message. 681 681 682 -=== 3.3.7 Set Interrupt Mode === 679 +=== 3.3.7 Set Interrupt Mode: === 683 683 684 684 685 -Feature, Set Interrupt mode for P A8 of pin.682 +Feature, Set Interrupt mode for GPIO_EXIT. 686 686 687 687 (% style="color:blue" %)**AT Command: AT+INTMOD** 688 688 ... ... @@ -710,47 +710,15 @@ 710 710 * Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode 711 711 * Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger 712 712 713 -= =====710 += 4. Battery & Power Consumption: = 714 714 715 -=== 3.3.7 Set Power Output Duration === 716 716 717 - 718 -Control the output duration 5V . Before each sampling, device will 719 - 720 -~1. first enable the power output to external sensor, 721 - 722 -2. keep it on as per duration, read sensor value and construct uplink payload 723 - 724 -3. final, close the power output. 725 - 726 -(% style="color:blue" %)**AT Command: AT+5VT** 727 - 728 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %) 729 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response** 730 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default) 731 -OK 732 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK 733 - 734 -(% style="color:blue" %)**Downlink Command: 0x07** 735 - 736 -Format: Command Code (0x07) followed by 2 bytes. 737 - 738 -The first and second bytes are the time to turn on. 739 - 740 -* Example 1: Downlink Payload: 070000 **~-~-->** AT+5VT=0 741 -* Example 2: Downlink Payload: 0701F4 **~-~-->** AT+5VT=500 742 - 743 -= = 744 - 745 -= 4. Battery & Power Consumption = 746 - 747 - 748 748 S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace. 749 749 750 750 [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] . 751 751 752 752 753 -= 5. OTA Firmware update = 718 += 5. OTA Firmware update: = 754 754 755 755 756 756 (% class="wikigeneratedid" %) ... ... @@ -760,13 +760,13 @@ 760 760 * Update with new features. 761 761 * Fix bugs. 762 762 763 -Firmware and changelog can be downloaded from : url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**728 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]** 764 764 765 765 766 766 Methods to Update Firmware: 767 767 768 -* (Recommanded way) OTA firmware update via wireless: 769 -* Update through UART TTL interface. url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.733 +* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]] 734 +* Update through UART TTL interface. **[[Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**. 770 770 771 771 = 6. FAQ = 772 772 ... ... @@ -775,7 +775,7 @@ 775 775 = 7. Order Info = 776 776 777 777 778 -Part Number: 743 +Part Number: (% style="color:blue" %)**S31-LB-XX / S31B-LB-XX** 779 779 780 780 (% style="color:red" %)**XX**(%%): The default frequency band 781 781 ... ... @@ -817,4 +817,4 @@ 817 817 818 818 * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule. 819 819 820 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[ Support@dragino.cc>>mailto:Support@dragino.cc]].785 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
- 1682646494051-944.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -206.9 KB - Content
- S31-B.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Ellie - Size
-
... ... @@ -1,1 +1,0 @@ 1 -28.3 KB - Content
- S31.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Ellie - Size
-
... ... @@ -1,1 +1,0 @@ 1 -58.7 KB - Content
- S31B.jpg
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Ellie - Size
-
... ... @@ -1,1 +1,0 @@ 1 -40.5 KB - Content
- image-20230426084152-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -190.0 KB - Content
- image-20230523174230-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Saxer - Size
-
... ... @@ -1,1 +1,0 @@ 1 -605.9 KB - Content