Skip to Content
Last modified by Mengting Qiu on 2025/07/01 15:58
From version 16.2
edited by Xiaoling
on 2023/04/21 17:16
Change comment: There is no comment for this version
To version 60.20
edited by Xiaoling
on 2023/06/05 14:42
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,6 +1,9 @@
1 -
1 +(% style="text-align:center" %)
2 +[[image:S31-B.jpg]]
2 2  
3 3  
5 +
6 +
4 4  **Table of Contents：**
5 5  
6 6  {{toc/}}
... ... @@ -15,41 +15,24 @@
15 15  == 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
16 16  
17 17  
18 -(((
19 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
20 -)))
21 +The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
21 21  
22 -(((
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
24 -)))
23 +The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
25 25  
26 -(((
27 27  The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 -)))
29 29  
30 -(((
31 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature,**(%%) user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
32 -)))
27 +S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
33 33  
34 -(((
35 -S31x-LB has max 3 probes which measure maximum 3 temperature points.
36 -)))
29 +S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
37 37  
38 -(((
39 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
40 -)))
31 +S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
41 41  
42 -(((
43 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
44 -)))
45 -
46 -(((
47 47  Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
48 -)))
49 49  
50 50  
51 51  == 1.2 ​Features ==
52 52  
38 +
53 53  * LoRaWAN 1.0.3 Class A
54 54  * Ultra-low power consumption
55 55  * External 3 meters SHT31 probe (For S31-LB)
... ... @@ -137,7 +137,7 @@
137 137  == 1.6 BLE connection ==
138 138  
139 139  
140 -D2x-LB support BLE remote configure.
126 +S31x-LB support BLE remote configure.
141 141  
142 142  
143 143  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -149,12 +149,19 @@
149 149  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
150 150  
151 151  
152 -== 1.7  Hardware Variant ==
138 +== 1.7 Pin Definitions ==
153 153  
140 +[[image:image-20230523174230-1.png]]
154 154  
155 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
156 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
157 -|(% style="width:102px" %)S31-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
142 +
143 +== 1.8 Hardware Variant ==
144 +
145 +
146 +(% border="1" cellspacing="5" style="width:472px" %)
147 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 187px; background-color:#D9E2F3;color:#0070C0" %)Probe Info
148 +|(% style="width:102px" %)(((
149 +S31-LB
150 +)))|(% style="width:190px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:187px" %)(((
158 158  1 x SHT31 Probe
159 159  
160 160  Cable Length : 2 meters
... ... @@ -161,7 +161,9 @@
161 161  
162 162  
163 163  )))
164 -|(% style="width:102px" %)S31B-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
157 +|(% style="width:102px" %)(((
158 +S31B-LB
159 +)))|(% style="width:190px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:187px" %)(((
165 165  1 x SHT31 Probe
166 166  
167 167  Installed in device.
... ... @@ -171,7 +171,7 @@
171 171  
172 172  
173 173  
174 -== 1.8 Mechanical ==
169 +== 1.9 Mechanical ==
175 175  
176 176  
177 177  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -196,7 +196,6 @@
196 196  
197 197  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
198 198  
199 -
200 200  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
201 201  
202 202  
... ... @@ -204,10 +204,9 @@
204 204  
205 205  Each S31x-LB is shipped with a sticker with the default device EUI as below:
206 206  
207 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220607170145-1.jpeg?rev=1.1||alt="image-20220607170145-1.jpeg"]]
201 +[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
208 208  
209 209  
210 -
211 211  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
212 212  
213 213  
... ... @@ -218,18 +218,18 @@
218 218  
219 219  (% style="color:blue" %)**Add APP EUI and DEV EUI**
220 220  
221 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="image-20220611161308-4.png"]]
214 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
222 222  
223 223  
224 224  (% style="color:blue" %)**Add APP EUI in the application**
225 225  
226 226  
227 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="image-20220611161308-5.png"]]
220 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
228 228  
229 229  
230 230  (% style="color:blue" %)**Add APP KEY**
231 231  
232 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="image-20220611161308-6.png"]]
225 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
233 233  
234 234  
235 235  (% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
... ... @@ -259,7 +259,7 @@
259 259  
260 260  Example parse in TTNv3
261 261  
262 -[[image:image-20230421171614-1.png]]
255 +[[image:image-20230524144422-1.png||height="174" width="1080"]]
263 263  
264 264  
265 265  (% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
... ... @@ -321,23 +321,26 @@
321 321  Sensor Data is uplink via FPORT=2
322 322  
323 323  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
324 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
317 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
325 325  **Size(bytes)**
326 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
327 -|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
328 -[[Battery>>||anchor="HBattery:"]]
319 +)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
320 +|(% style="width:99px" %)Value|(% style="width:69px" %)(((
321 +Battery
329 329  )))|(% style="width:130px" %)(((
330 -[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
331 -)))|(% style="width:91px" %)(((
332 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
333 -)))|(% style="width:103px" %)(((
334 -[[Temperature>>||anchor="HTemperature:"]]
335 -)))|(% style="width:80px" %)(((
336 -[[Humidity>>||anchor="HHumidity:"]]
323 +Unix TimeStamp
324 +)))|(% style="width:194px" %)(((
325 +Alarm Flag & MOD& Level of PA8
326 +)))|(% style="width:106px" %)(((
327 +Temperature
328 +)))|(% style="width:97px" %)(((
329 +Humidity
337 337  )))
338 338  
339 -==== (% style="color:#4472c4" %)**Battery:**(%%) ====
332 +[[image:image-20230524144456-2.png||height="180" width="1142"]]
340 340  
334 +
335 +==== (% style="color:#4472c4" %)**Battery**(%%) ====
336 +
341 341  Sensor Battery Level.
342 342  
343 343  Ex1: 0x0B45 = 2885mV
... ... @@ -346,7 +346,7 @@
346 346  
347 347  
348 348  
349 -==== (% style="color:#4472c4" %)**Temperature:**(%%) ====
345 +==== (% style="color:#4472c4" %)**Temperature**(%%) ====
350 350  
351 351  **Example**:
352 352  
... ... @@ -357,23 +357,27 @@
357 357  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
358 358  
359 359  
360 -==== (% style="color:#4472c4" %)**Humidity:**(%%) ====
356 +==== (% style="color:#4472c4" %)**Humidity**(%%) ====
361 361  
362 362  
363 363  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
364 364  
365 365  
366 -==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
362 +==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
367 367  
368 368  
369 369  **Example:**
370 370  
371 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
367 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
372 372  
373 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
369 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
374 374  
375 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
371 +If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
376 376  
373 +If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
374 +
375 +If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
376 +
377 377  If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
378 378  
379 379  
... ... @@ -384,7 +384,7 @@
384 384  
385 385  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
386 386  
387 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
387 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
388 388  
389 389  
390 390  == 2.5 Datalog Feature ==
... ... @@ -396,28 +396,34 @@
396 396  === 2.5.1 Ways to get datalog via LoRaWAN ===
397 397  
398 398  
399 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
399 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
400 400  
401 -* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
402 -* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
401 +* (((
402 +a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
403 +)))
404 +* (((
405 +b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
406 +)))
403 403  
404 404  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
405 405  
406 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
410 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
407 407  
412 +
408 408  === 2.5.2 Unix TimeStamp ===
409 409  
410 410  
411 411  S31x-LB uses Unix TimeStamp format based on
412 412  
413 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
418 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
414 414  
415 415  User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
416 416  
417 417  Below is the converter example
418 418  
419 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
424 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
420 420  
426 +
421 421  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
422 422  
423 423  
... ... @@ -438,18 +438,31 @@
438 438  
439 439  **Retrieval data payload:**
440 440  
441 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
442 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
447 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
448 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
443 443  **Size(bytes)**
444 -)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
445 -|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
446 -[[Temp_Black>>||anchor="HTemperatureBlack:"]]
447 -)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
450 +)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
451 +|(% style="width:103px" %)Value|(% style="width:68px" %)(((
452 +ignore
453 +)))|(% style="width:104px" %)(((
454 +(((
455 +Humidity
456 +)))
448 448  
449 -**Poll message flag & Ext:**
458 +(((
459 +
460 +)))
461 +)))|(% style="width:87px" %)(((
462 +Temperature
463 +)))|(% style="width:178px" %)(((
464 +Poll message flag & Alarm Flag& Level of PA8
465 +)))|(% style="width:137px" %)Unix Time Stamp
450 450  
451 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
467 +**Poll message flag & Alarm Flag & Level of PA8:**
452 452  
469 +[[image:image-20230524114302-1.png||height="115" width="736"]]
470 +
471 +
453 453  **No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
454 454  
455 455  **Poll Message Flag**: 1: This message is a poll message reply.
... ... @@ -470,26 +470,26 @@
470 470  
471 471  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
472 472  
473 -
474 474  **Example:**
475 475  
476 -If D2x-LB has below data inside Flash:
494 +If S31x-LB has below data inside Flash:
477 477  
478 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
496 +[[image:image-20230524114654-2.png]]
479 479  
480 -If user sends below downlink command: 3160065F9760066DA705
481 481  
482 -Where : Start time: 60065F97 = time 21/1/19 04:27:03
499 +If user sends below downlink command: 31646D84E1646D856C05
483 483  
484 - Stop time: 60066DA7= time 21/1/19 05:27:03
501 +Where : Start time: 646D84E1 = time 23/5/24 03:30:41
485 485  
503 + Stop time: 646D856C= time 23/5/24 03:33:00
486 486  
505 +
487 487  **S31x-LB will uplink this payload.**
488 488  
489 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
508 +[[image:image-20230524114826-3.png||height="448" width="1244"]]
490 490  
491 491  (((
492 -__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
511 +00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
493 493  )))
494 494  
495 495  (((
... ... @@ -497,32 +497,28 @@
497 497  )))
498 498  
499 499  (((
500 -7FFF089801464160065F97
519 +00 00 02 36 01 10 40 64 6D 84 E1
501 501  )))
502 502  
503 503  (((
504 -**Ext sensor data**=0x7FFF/100=327.67
523 +**Hum**=0x0236/10=56.6
505 505  )))
506 506  
507 507  (((
508 -**Temp**=0x088E/100=22.00
527 +**Temp**=0x0110/10=27.2
509 509  )))
510 510  
511 511  (((
512 -**Hum**=0x014B/10=32.6
531 +**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
513 513  )))
514 514  
515 515  (((
516 -**poll message flag & Ext**=0x41,means reply data,Ext=1
535 +**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
517 517  )))
518 518  
519 -(((
520 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
521 -)))
522 522  
539 +(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
523 523  
524 -(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
525 -
526 526  == 2.6 Temperature Alarm Feature ==
527 527  
528 528  
... ... @@ -529,9 +529,10 @@
529 529  S31x-LB work flow with Alarm feature.
530 530  
531 531  
532 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
547 +[[image:image-20230524110125-3.png||height="768" width="1115"]]
533 533  
534 534  
550 +
535 535  == 2.7 Frequency Plans ==
536 536  
537 537  
... ... @@ -540,9 +540,15 @@
540 540  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
541 541  
542 542  
559 +== 2.8 ​Firmware Change Log ==
560 +
561 +
562 +**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
563 +
564 +
543 543  = 3. Configure S31x-LB =
544 544  
545 -== 3.1 Configure Methods: ==
567 +== 3.1 Configure Methods ==
546 546  
547 547  
548 548  S31x-LB supports below configure method:
... ... @@ -579,7 +579,7 @@
579 579  (% style="color:blue" %)**AT Command: AT+TDC**
580 580  
581 581  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
582 -|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
604 +|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
583 583  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
584 584  30000
585 585  OK
... ... @@ -610,8 +610,9 @@
610 610  Sensor will upload Device Status via FPORT=5. See payload section for detail.
611 611  
612 612  
613 -=== 3.3.3 Set Temperature Alarm Threshold: ===
635 +=== 3.3.3 Set Temperature Alarm Threshold ===
614 614  
637 +
615 615  * (% style="color:blue" %)**AT Command:**
616 616  
617 617  (% style="color:#037691" %)**AT+SHTEMP=min,max**
... ... @@ -631,8 +631,9 @@
631 631  (% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
632 632  
633 633  
634 -=== 3.3.4 Set Humidity Alarm Threshold: ===
657 +=== 3.3.4 Set Humidity Alarm Threshold ===
635 635  
659 +
636 636  * (% style="color:blue" %)**AT Command:**
637 637  
638 638  (% style="color:#037691" %)**AT+SHHUM=min,max**
... ... @@ -652,8 +652,9 @@
652 652  (% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
653 653  
654 654  
655 -=== 3.3.5 Set Alarm Interval: ===
679 +=== 3.3.5 Set Alarm Interval ===
656 656  
681 +
657 657  The shortest time of two Alarm packet. (unit: min)
658 658  
659 659  * (% style="color:blue" %)**AT Command:**
... ... @@ -665,7 +665,7 @@
665 665  (% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
666 666  
667 667  
668 -=== 3.3.6 Get Alarm settings  （什么FPORT?） ===
693 +=== 3.3.6 Get Alarm settings ===
669 669  
670 670  
671 671  Send a LoRaWAN downlink to ask device send Alarm settings.
... ... @@ -674,9 +674,8 @@
674 674  
675 675  **Example:**
676 676  
677 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
702 +[[image:image-20230524110211-4.png]]
678 678  
679 -
680 680  **Explain:**
681 681  
682 682  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
... ... @@ -685,12 +685,14 @@
685 685  === 3.3.7 Set Interrupt Mode ===
686 686  
687 687  
688 -Feature, Set Interrupt mode for GPIO_EXIT.
712 +Feature, Set Interrupt mode for PA8 of pin.
689 689  
714 +When AT+INTMOD=0 is set, PA8 is used as a digital input port.
715 +
690 690  (% style="color:blue" %)**AT Command: AT+INTMOD**
691 691  
692 692  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
693 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
719 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
694 694  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
695 695  0
696 696  OK
... ... @@ -714,6 +714,35 @@
714 714  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
715 715  
716 716  
743 +=== 3.3.8 Set Power Output Duration ===
744 +
745 +
746 +Control the output duration 5V . Before each sampling, device will
747 +
748 +~1. first enable the power output to external sensor,
749 +
750 +2. keep it on as per duration, read sensor value and construct uplink payload
751 +
752 +3. final, close the power output.
753 +
754 +(% style="color:blue" %)**AT Command: AT+5VT**
755 +
756 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
757 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
758 +|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
759 +OK
760 +|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
761 +
762 +(% style="color:blue" %)**Downlink Command: 0x07**
763 +
764 +Format: Command Code (0x07) followed by 2 bytes.
765 +
766 +The first and second bytes are the time to turn on.
767 +
768 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
769 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
770 +
771 +
717 717  = 4. Battery & Power Consumption =
718 718  
719 719  
... ... @@ -732,13 +732,13 @@
732 732  * Update with new features.
733 733  * Fix bugs.
734 734  
735 -Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
790 +Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
736 736  
737 737  
738 738  Methods to Update Firmware:
739 739  
740 -* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
741 -* Update through UART TTL interface. **[[Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
795 +* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
796 +* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
742 742  
743 743  
744 744  = 6. FAQ =
... ... @@ -748,7 +748,7 @@
748 748  = 7. Order Info =
749 749  
750 750  
751 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
806 +Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
752 752  
753 753  (% style="color:red" %)**XX**(%%): The default frequency band
754 754  
... ... @@ -792,4 +792,4 @@
792 792  
793 793  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
794 794  
795 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
850 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
1682646494051-944.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +206.9 KB
Content
S31-B.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Ellie
Size
... ... @@ -1,0 +1,1 @@
1 +28.3 KB
Content
S31.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Ellie
Size
... ... @@ -1,0 +1,1 @@
1 +58.7 KB
Content
S31B.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Ellie
Size
... ... @@ -1,0 +1,1 @@
1 +40.5 KB
Content
image-20230426084152-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +190.0 KB
Content
image-20230523174230-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +605.9 KB
Content
image-20230524105433-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +121.4 KB
Content
image-20230524105747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +223.2 KB
Content
image-20230524110125-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +194.1 KB
Content
image-20230524110211-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20230524114302-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +12.0 KB
Content
image-20230524114654-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +17.8 KB
Content
image-20230524114826-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +82.3 KB
Content
image-20230524144422-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +34.9 KB
Content
image-20230524144456-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +33.9 KB
Content
image-20230527093155-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.3 KB
Content
image-20230527093214-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content