Skip to Content
Last modified by Xiaoling on 2025/07/10 16:21
From version 62.3
edited by Xiaoling
on 2023/06/06 09:49
Change comment: There is no comment for this version
To version 50.1
edited by Edwin Chen
on 2023/02/25 15:49
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -PS-LB --LoRaWAN Air Water Pressure Sensor User Manual
1 +PS-LB -- LoRaWAN Air Water Pressure Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -60,8 +60,6 @@
60 60  * 8500mAh Battery for long term use
61 61  * Controllable 3.3v,5v and 12v output to power external sensor
62 62  
63 -
64 -
65 65  == 1.3 Specification ==
66 66  
67 67  
... ... @@ -78,7 +78,7 @@
78 78  
79 79  (% style="color:#037691" %)**LoRa Spec:**
80 80  
81 -* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz,Band 2 (LF): 410 ~~ 528 Mhz
79 +* Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
82 82  * Max +22 dBm constant RF output vs.
83 83  * RX sensitivity: down to -139 dBm.
84 84  * Excellent blocking immunity
... ... @@ -108,8 +108,6 @@
108 108  * Sleep Mode: 5uA @ 3.3v
109 109  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
110 110  
111 -
112 -
113 113  == 1.4 Probe Types ==
114 114  
115 115  === 1.4.1 Thread Installation Type ===
... ... @@ -128,8 +128,6 @@
128 128  * Operating temperature: -20℃~~60℃
129 129  * Connector Type: Various Types, see order info
130 130  
131 -
132 -
133 133  === 1.4.2 Immersion Type ===
134 134  
135 135  
... ... @@ -139,12 +139,13 @@
139 139  * Measuring Range: Measure range can be customized, up to 100m.
140 140  * Accuracy: 0.2% F.S
141 141  * Long-Term Stability: ±0.2% F.S / Year
136 +* Overload 200% F.S
137 +* Zero Temperature Drift: ±2% F.S)
138 +* FS Temperature Drift: ±2% F.S
142 142  * Storage temperature: -30℃~~80℃
143 -* Operating temperature: 0℃~~50℃
140 +* Operating temperature: -40℃~~85℃
144 144  * Material: 316 stainless steels
145 145  
146 -
147 -
148 148  == 1.5 Probe Dimension ==
149 149  
150 150  
... ... @@ -202,21 +202,19 @@
202 202  [[image:1675071855856-879.png]]
203 203  
204 204  
205 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
206 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
207 -|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
200 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
201 +|=(% style="width: 167px;" %)**Behavior on ACT**|=(% style="width: 117px;" %)**Function**|=(% style="width: 225px;" %)**Action**
202 +|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
208 208  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
209 209  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
210 210  )))
211 -|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
212 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
213 -(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
206 +|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
207 +(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
208 +(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
214 214  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
215 215  )))
216 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB-NA is in Deep Sleep Mode.
211 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
217 217  
218 -
219 -
220 220  == 1.9 Pin Mapping ==
221 221  
222 222  
... ... @@ -274,9 +274,10 @@
274 274  
275 275  Each PS-LB is shipped with a sticker with the default device EUI as below:
276 276  
277 -[[image:image-20230426085320-1.png||height="234" width="504"]]
270 +[[image:image-20230131134744-2.jpeg]]
278 278  
279 279  
273 +
280 280  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
281 281  
282 282  
... ... @@ -320,10 +320,10 @@
320 320  Users can also use the downlink command(0x26 01) to ask PS-LB to resend this uplink.
321 321  
322 322  
323 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
324 -|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
325 -|(% style="background-color:#f2f2f2; width:103px" %)**Size (bytes)**|(% style="background-color:#f2f2f2; width:72px" %)**1**|(% style="background-color:#f2f2f2" %)**2**|(% style="background-color:#f2f2f2; width:91px" %)**1**|(% style="background-color:#f2f2f2; width:86px" %)**1**|(% style="background-color:#f2f2f2; width:44px" %)**2**
326 -|(% style="background-color:#f2f2f2; width:103px" %)**Value**|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
317 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
318 +|(% colspan="6" %)**Device Status (FPORT=5)**
319 +|(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
320 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
327 327  
328 328  Example parse in TTNv3
329 329  
... ... @@ -389,11 +389,11 @@
389 389  Uplink payload includes in total 9 bytes.
390 390  
391 391  
392 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
393 -|(% style="background-color:#d9e2f3; color:#0070c0; width:97px" %)(((
386 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
387 +|(% style="width:97px" %)(((
394 394  **Size(bytes)**
395 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:48px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:71px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:98px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:73px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:122px" %)**1**
396 -|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.4ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.507E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.607E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.7IN126IN226INTpin"]]
389 +)))|(% style="width:48px" %)**2**|(% style="width:71px" %)**2**|(% style="width:98px" %)**2**|(% style="width:73px" %)**2**|(% style="width:122px" %)**1**
390 +|(% style="width:97px" %)Value|(% style="width:48px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:71px" %)[[Probe Model>>||anchor="H2.3.5ProbeModel"]]|(% style="width:98px" %)[[0 ~~~~ 20mA value>>||anchor="H2.3.607E20mAvalue28IDC_IN29"]]|(% style="width:73px" %)[[0 ~~~~ 30v value>>||anchor="H2.3.707E30Vvalue28pinVDC_IN29"]]|(% style="width:122px" %)[[IN1 &IN2 Interrupt  flag>>||anchor="H2.3.8IN126IN226INTpin"]]
397 397  
398 398  [[image:1675144608950-310.png]]
399 399  
... ... @@ -414,13 +414,13 @@
414 414  PS-LB has different kind of probe, 4~~20mA represent the full scale of the measuring range. So a 12mA output means different meaning for different probe. 
415 415  
416 416  
417 -**For example.**
411 +For example.
418 418  
419 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
420 -|(% style="background-color:#d9e2f3; color:#0070c0" %)**Part Number**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Probe Used**|(% style="background-color:#d9e2f3; color:#0070c0" %)**4~~20mA scale**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Example: 12mA meaning**
421 -|(% style="background-color:#f2f2f2" %)PS-LB-I3|(% style="background-color:#f2f2f2" %)immersion type with 3 meters cable|(% style="background-color:#f2f2f2" %)0~~3 meters|(% style="background-color:#f2f2f2" %)1.5 meters pure water
422 -|(% style="background-color:#f2f2f2" %)PS-LB-I5|(% style="background-color:#f2f2f2" %)immersion type with 5 meters cable|(% style="background-color:#f2f2f2" %)0~~5 meters|(% style="background-color:#f2f2f2" %)2.5 meters pure water
423 -|(% style="background-color:#f2f2f2" %)PS-LB-T20-B|(% style="background-color:#f2f2f2" %)T20 threaded probe|(% style="background-color:#f2f2f2" %)0~~1MPa|(% style="background-color:#f2f2f2" %)0.5MPa air / gas or water pressure
413 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
414 +|**Part Number**|**Probe Used**|**4~~20mA scale**|**Example: 12mA meaning**
415 +|PS-LB-I3|immersion type with 3 meters cable|0~~3 meters|1.5 meters pure water
416 +|PS-LB-I5|immersion type with 5 meters cable|0~~5 meters|2.5 meters pure water
417 +|PS-LB-T20-B|T20 threaded probe|0~~1MPa|0.5MPa air / gas or water pressure
424 424  
425 425  The probe model field provides the convenient for server to identical how it should parse the 4~~20mA sensor value and get the correct value.
426 426  
... ... @@ -462,7 +462,7 @@
462 462  09 (H): (0x09&0x04)>>2=0    IN2 pin is low level.
463 463  
464 464  
465 -This data field shows if this packet is generated by (% style="color:blue" %)**Interrupt Pin** (%%)or not. [[Click here>>||anchor="H3.3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
459 +This data field shows if this packet is generated by (% style="color:blue" %)**Interrupt Pin** (%%)or not. [[Click here>>||anchor="H3.2SetInterruptMode"]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal.
466 466  
467 467  (% style="color:#037691" %)**Example:**
468 468  
... ... @@ -472,15 +472,14 @@
472 472  
473 473  0x01: Interrupt Uplink Packet.
474 474  
469 +=== (% id="cke_bm_109176S" style="display:none" %) (%%)2.3.8 Sensor value, FPORT~=7 ===
475 475  
476 -=== (% style="color:inherit; font-family:inherit; font-size:23px" %)2.3.8 Sensor value, FPORT~=7(%%) ===
477 477  
478 -
479 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:508.222px" %)
480 -|(% style="background-color:#d9e2f3; color:#0070c0; width:94px" %)(((
472 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:508.222px" %)
473 +|(% style="width:94px" %)(((
481 481  **Size(bytes)**
482 -)))|(% style="background-color:#d9e2f3; color:#0070c0; width:43px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:367px" %)**n**
483 -|(% style="width:94px" %)Value|(% style="width:43px" %)[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(% style="width:367px" %)(((
475 +)))|(% style="width:43px" %)2|(% style="width:367px" %)n
476 +|(% style="width:94px" %)**Value**|(% style="width:43px" %)[[BAT>>||anchor="H2.3.4BatteryInfo"]]|(% style="width:367px" %)(((
484 484  Voltage value, each 2 bytes is a set of voltage values.
485 485  )))
486 486  
... ... @@ -537,6 +537,7 @@
537 537  
538 538  
539 539  
533 +
540 540  [[image:1675145029119-717.png]]
541 541  
542 542  
... ... @@ -570,39 +570,34 @@
570 570  [[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
571 571  
572 572  
573 -= 3. Configure PS-LB =
567 += 3. Configure PS-LB via AT Command or LoRaWAN Downlink =
574 574  
575 -== 3.1 Configure Methods ==
576 576  
570 +Use can configure PS-LB via AT Command or LoRaWAN Downlink.
577 577  
578 -PS-LB-NA supports below configure method:
572 +* AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].
573 +* LoRaWAN Downlink instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
579 579  
580 -* AT Command via Bluetooth Connection (**Recommand Way**): [[BLE Configure Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
581 -* AT Command via UART Connection : See [[FAQ>>||anchor="H6.FAQ"]].
582 -* LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
575 +There are two kinds of commands to configure PS-LB, they are:
583 583  
577 +* (% style="color:#037691" %)**General Commands**
584 584  
585 -
586 -== 3.2 General Commands ==
587 -
588 -
589 589  These commands are to configure:
590 590  
591 591  * General system settings like: uplink interval.
592 592  * LoRaWAN protocol & radio related command.
593 593  
594 -They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
584 +They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
595 595  
596 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
586 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
597 597  
598 598  
599 -== 3.3 Commands special design for PS-LB ==
589 +* (% style="color:#037691" %)**Commands special design for PS-LB**
600 600  
601 -
602 602  These commands only valid for PS-LB, as below:
603 603  
604 604  
605 -=== 3.3.1 Set Transmit Interval Time ===
594 +== 3.1 Set Transmit Interval Time ==
606 606  
607 607  
608 608  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -609,14 +609,14 @@
609 609  
610 610  (% style="color:blue" %)**AT Command: AT+TDC**
611 611  
612 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
613 -|=(% style="width: 160px; background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 160px; background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)**Response**
614 -|(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=?|(% style="background-color:#f2f2f2; width:166px" %)Show current transmit Interval|(% style="background-color:#f2f2f2" %)(((
601 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
602 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 137px;" %)**Function**|=**Response**
603 +|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
615 615  30000
616 616  OK
617 617  the interval is 30000ms = 30s
618 618  )))
619 -|(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=60000|(% style="background-color:#f2f2f2; width:166px" %)Set Transmit Interval|(% style="background-color:#f2f2f2" %)(((
608 +|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
620 620  OK
621 621  Set transmit interval to 60000ms = 60 seconds
622 622  )))
... ... @@ -630,29 +630,27 @@
630 630  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
631 631  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
632 632  
622 +== 3.2 Set Interrupt Mode ==
633 633  
634 634  
635 -=== 3.3.2 Set Interrupt Mode ===
636 -
637 -
638 638  Feature, Set Interrupt mode for GPIO_EXIT.
639 639  
640 640  (% style="color:blue" %)**AT Command: AT+INTMOD**
641 641  
642 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
643 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3;color:#0070C0" %)**Response**
644 -|(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=?|(% style="background-color:#f2f2f2; width:196px" %)Show current interrupt mode|(% style="background-color:#f2f2f2; width:157px" %)(((
629 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
630 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 157px;" %)**Response**
631 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
645 645  0
646 646  OK
647 647  the mode is 0 =Disable Interrupt
648 648  )))
649 -|(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=2|(% style="background-color:#f2f2f2; width:196px" %)(((
636 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
650 650  Set Transmit Interval
651 651  0. (Disable Interrupt),
652 652  ~1. (Trigger by rising and falling edge)
653 653  2. (Trigger by falling edge)
654 654  3. (Trigger by rising edge)
655 -)))|(% style="background-color:#f2f2f2; width:157px" %)OK
642 +)))|(% style="width:157px" %)OK
656 656  
657 657  (% style="color:blue" %)**Downlink Command: 0x06**
658 658  
... ... @@ -663,61 +663,59 @@
663 663  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
664 664  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
665 665  
653 +== 3.3 Set the output time ==
666 666  
667 667  
668 -=== 3.3.3 Set the output time ===
669 -
670 -
671 671  Feature, Control the output 3V3 , 5V or 12V.
672 672  
673 673  (% style="color:blue" %)**AT Command: AT+3V3T**
674 674  
675 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:474px" %)
676 -|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 201px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 116px;background-color:#D9E2F3;color:#0070C0" %)**Response**
677 -|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=?|(% style="background-color:#f2f2f2; width:201px" %)Show 3V3 open time.|(% style="background-color:#f2f2f2; width:116px" %)(((
660 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:474px" %)
661 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 201px;" %)**Function**|=(% style="width: 116px;" %)**Response**
662 +|(% style="width:154px" %)AT+3V3T=?|(% style="width:201px" %)Show 3V3 open time.|(% style="width:116px" %)(((
678 678  0
679 679  OK
680 680  )))
681 -|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=0|(% style="background-color:#f2f2f2; width:201px" %)Normally open 3V3 power supply.|(% style="background-color:#f2f2f2; width:116px" %)(((
666 +|(% style="width:154px" %)AT+3V3T=0|(% style="width:201px" %)Normally open 3V3 power supply.|(% style="width:116px" %)(((
682 682  OK
683 683  default setting
684 684  )))
685 -|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=1000|(% style="background-color:#f2f2f2; width:201px" %)Close after a delay of 1000 milliseconds.|(% style="background-color:#f2f2f2; width:116px" %)(((
670 +|(% style="width:154px" %)AT+3V3T=1000|(% style="width:201px" %)Close after a delay of 1000 milliseconds.|(% style="width:116px" %)(((
686 686  OK
687 687  )))
688 -|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=65535|(% style="background-color:#f2f2f2; width:201px" %)Normally closed 3V3 power supply.|(% style="background-color:#f2f2f2; width:116px" %)(((
673 +|(% style="width:154px" %)AT+3V3T=65535|(% style="width:201px" %)Normally closed 3V3 power supply.|(% style="width:116px" %)(((
689 689  OK
690 690  )))
691 691  
692 692  (% style="color:blue" %)**AT Command: AT+5VT**
693 693  
694 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:470px" %)
695 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 114px;background-color:#D9E2F3;color:#0070C0" %)**Response**
696 -|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=?|(% style="background-color:#f2f2f2; width:196px" %)Show 5V open time.|(% style="background-color:#f2f2f2; width:114px" %)(((
679 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:470px" %)
680 +|=(% style="width: 155px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 114px;" %)**Response**
681 +|(% style="width:155px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:114px" %)(((
697 697  0
698 698  OK
699 699  )))
700 -|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=0|(% style="background-color:#f2f2f2; width:196px" %)Normally closed 5V power supply.|(% style="background-color:#f2f2f2; width:114px" %)(((
685 +|(% style="width:155px" %)AT+5VT=0|(% style="width:196px" %)Normally closed 5V power supply.|(% style="width:114px" %)(((
701 701  OK
702 702  default setting
703 703  )))
704 -|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=1000|(% style="background-color:#f2f2f2; width:196px" %)Close after a delay of 1000 milliseconds.|(% style="background-color:#f2f2f2; width:114px" %)(((
689 +|(% style="width:155px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:114px" %)(((
705 705  OK
706 706  )))
707 -|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=65535|(% style="background-color:#f2f2f2; width:196px" %)Normally open 5V power supply.|(% style="background-color:#f2f2f2; width:114px" %)(((
692 +|(% style="width:155px" %)AT+5VT=65535|(% style="width:196px" %)Normally open 5V power supply.|(% style="width:114px" %)(((
708 708  OK
709 709  )))
710 710  
711 711  (% style="color:blue" %)**AT Command: AT+12VT**
712 712  
713 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:443px" %)
714 -|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 199px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 83px;background-color:#D9E2F3;color:#0070C0" %)**Response**
715 -|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=?|(% style="background-color:#f2f2f2; width:199px" %)Show 12V open time.|(% style="background-color:#f2f2f2; width:83px" %)(((
698 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:443px" %)
699 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 199px;" %)**Function**|=(% style="width: 83px;" %)**Response**
700 +|(% style="width:156px" %)AT+12VT=?|(% style="width:199px" %)Show 12V open time.|(% style="width:83px" %)(((
716 716  0
717 717  OK
718 718  )))
719 -|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=0|(% style="background-color:#f2f2f2; width:199px" %)Normally closed 12V power supply.|(% style="background-color:#f2f2f2; width:83px" %)OK
720 -|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=500|(% style="background-color:#f2f2f2; width:199px" %)Close after a delay of 500 milliseconds.|(% style="background-color:#f2f2f2; width:83px" %)(((
704 +|(% style="width:156px" %)AT+12VT=0|(% style="width:199px" %)Normally closed 12V power supply.|(% style="width:83px" %)OK
705 +|(% style="width:156px" %)AT+12VT=500|(% style="width:199px" %)Close after a delay of 500 milliseconds.|(% style="width:83px" %)(((
721 721  OK
722 722  )))
723 723  
... ... @@ -734,14 +734,12 @@
734 734  * Example 5: Downlink Payload: 070301F4  **~-~-->**  AT+12VT=500
735 735  * Example 6: Downlink Payload: 07030000  **~-~-->**  AT+12VT=0
736 736  
722 +== 3.4 Set the Probe Model ==
737 737  
738 738  
739 -=== 3.3.4 Set the Probe Model ===
740 -
741 -
742 742  Users need to configure this parameter according to the type of external probe. In this way, the server can decode according to this value, and convert the current value output by the sensor into water depth or pressure value.
743 743  
744 -(% style="color:blue" %)**AT Command: AT** **+PROBE**
727 +**AT Command: AT** **+PROBE**
745 745  
746 746  AT+PROBE=aabb
747 747  
... ... @@ -753,30 +753,29 @@
753 753  
754 754  (A->01,B->02,C->03,D->04,E->05,F->06,G->07,H->08,I->09,J->0A,K->0B,L->0C)
755 755  
756 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
757 -|(% style="background-color:#d9e2f3; color:#0070c0; width:154px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:269px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Response**
758 -|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=?|(% style="background-color:#f2f2f2; width:269px" %)Get or Set the probe model.|(% style="background-color:#f2f2f2" %)0
739 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
740 +|**Command Example**|**Function**|**Response**
741 +|AT +PROBE =?|Get or Set the probe model.|0
759 759  OK
760 -|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0003|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 3m type.|(% style="background-color:#f2f2f2" %)OK
761 -|(% style="background-color:#f2f2f2; width:154px" %)(((
762 -AT+PROBE=000A
763 -)))|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 10m type.|(% style="background-color:#f2f2f2" %)OK
764 -|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0064|(% style="background-color:#f2f2f2; width:269px" %)Set water depth sensor mode, 100m type.|(% style="background-color:#f2f2f2" %)OK
765 -|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0101|(% style="background-color:#f2f2f2; width:269px" %)Set pressure transmitters mode, first type(A).|(% style="background-color:#f2f2f2" %)OK
766 -|(% style="background-color:#f2f2f2; width:154px" %)AT+PROBE=0000|(% style="background-color:#f2f2f2; width:269px" %)Initial state, no settings.|(% style="background-color:#f2f2f2" %)OK
743 +|AT +PROBE =0003|Set water depth sensor mode, 3m type.|OK
744 +|(((
745 +AT +PROBE =000A
767 767  
768 -(% style="color:blue" %)**Downlink Command: 0x08**
747 +
748 +)))|Set water depth sensor mode, 10m type.|OK
749 +|AT +PROBE =0101|Set pressure transmitters mode, first type(A).|OK
750 +|AT +PROBE =0000|Initial state, no settings.|OK
769 769  
752 +**Downlink Command: 0x08**
753 +
770 770  Format: Command Code (0x08) followed by 2 bytes.
771 771  
772 772  * Example 1: Downlink Payload: 080003  **~-~-->**  AT+PROBE=0003
773 773  * Example 2: Downlink Payload: 080101  **~-~-->**  AT+PROBE=0101
774 774  
759 +== 3.5 Multiple collections are one uplink（Since firmware V1.1） ==
775 775  
776 776  
777 -=== 3.3.5 Multiple collections are one uplink（Since firmware V1.1） ===
778 -
779 -
780 780  Added AT+STDC command to collect the voltage of VDC_INPUT multiple times and upload it at one time.
781 781  
782 782  (% style="color:blue" %)**AT Command: AT** **+STDC**
... ... @@ -789,20 +789,20 @@
789 789  (% style="color:#037691" %)**bb:**(%%) Each collection interval (s), the value is 1~~65535
790 790  (% style="color:#037691" %)**cc:**(%%)** **the number of collection times, the value is 1~~120
791 791  
792 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
793 -|(% style="background-color:#d9e2f3; color:#0070c0; width:160px" %)**Command Example**|(% style="background-color:#d9e2f3; color:#0070c0; width:215px" %)**Function**|(% style="background-color:#d9e2f3; color:#0070c0" %)**Response**
794 -|(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=?|(% style="background-color:#f2f2f2; width:215px" %)Get the mode of multiple acquisitions and one uplink.|(% style="background-color:#f2f2f2" %)1,10,18
774 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
775 +|**Command Example**|**Function**|**Response**
776 +|AT+STDC=?|Get the mode of multiple acquisitions and one uplink.|1,10,18
795 795  OK
796 -|(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=1,10,18|(% style="background-color:#f2f2f2; width:215px" %)Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(% style="background-color:#f2f2f2" %)(((
778 +|AT+STDC=1,10,18|Set the mode of multiple acquisitions and one uplink, collect once every 10 seconds, and report after 18 times.|(((
797 797  Attention:Take effect after ATZ
798 798  
799 799  OK
800 800  )))
801 -|(% style="background-color:#f2f2f2; width:160px" %)AT+STDC=0, 0,0|(% style="background-color:#f2f2f2; width:215px" %)(((
783 +|AT+STDC=0, 0,0|(((
802 802  Use the TDC interval to send packets.(default)
803 803  
804 804  
805 -)))|(% style="background-color:#f2f2f2" %)(((
787 +)))|(((
806 806  Attention:Take effect after ATZ
807 807  
808 808  OK
... ... @@ -814,57 +814,113 @@
814 814  
815 815  * Example 1: Downlink Payload: AE 01 02 58 12** ~-~-->**  AT+STDC=1,600,18
816 816  
799 += 4. Battery & how to replace =
817 817  
801 +== 4.1 Battery Type ==
818 818  
819 -= 4. Battery & Power Consumption =
820 820  
804 +PS-LB is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>https://www.dropbox.com/sh/w9l2oa3ytpculph/AAAPtt-apH4lYfCj-2Y6lHvQa?dl=0]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
821 821  
822 -PS-LB-NA uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
806 +The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
823 823  
824 -[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
808 +[[image:1675146710956-626.png]]
825 825  
826 826  
827 -= 5. OTA firmware update =
811 +Minimum Working Voltage for the PS-LB:
828 828  
813 +PS-LB:  2.45v ~~ 3.6v
829 829  
830 -Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
831 831  
816 +== 4.2 Replace Battery ==
832 832  
833 -= 6. FAQ =
834 834  
835 -== 6.1 How to use AT Command via UART to access device? ==
819 +Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
836 836  
821 +And make sure the positive and negative pins match.
837 837  
838 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
839 839  
824 +== 4.3 Power Consumption Analyze ==
840 840  
841 -== 6.2 How to update firmware via UART port? ==
842 842  
827 +Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
843 843  
844 -See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
829 +Instruction to use as below:
845 845  
831 +(% style="color:blue" %)**Step 1:**(%%) Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0>>https://www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0]]
846 846  
847 -== 6.3 How to change the LoRa Frequency Bands/Region? ==
833 +(% style="color:blue" %)**Step 2:**(%%) Open it and choose
848 848  
835 +* Product Model
836 +* Uplink Interval
837 +* Working Mode
849 849  
850 -You can follow the instructions for [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]].
851 -When downloading the images, choose the required image file for download. ​
839 +And the Life expectation in difference case will be shown on the right.
852 852  
841 +[[image:1675146895108-304.png]]
853 853  
854 -= 7. Troubleshooting =
855 855  
856 -== 7.1 Water Depth Always shows 0 in payload ==
844 +The battery related documents as below:
857 857  
846 +* [[Battery Dimension>>https://www.dropbox.com/s/ox5g9njwjle7aw3/LSN50-Battery-Dimension.pdf?dl=0]],
847 +* [[Lithium-Thionyl Chloride Battery datasheet, Tech Spec>>https://www.dropbox.com/sh/d4oyfnp8o94180o/AABQewCNSh5GPeQH86UxRgQQa?dl=0]]
848 +* [[Lithium-ion Battery-Capacitor datasheet>>https://www.dropbox.com/s/791gjes2lcbfi1p/SPC_1520_datasheet.jpg?dl=0]], [[Tech Spec>>https://www.dropbox.com/s/4pkepr9qqqvtzf2/SPC1520%20Technical%20Specification20171123.pdf?dl=0]]
858 858  
859 -If your device's IDC_intput_mA is normal, but your reading always shows 0, please refer to the following points:
850 +[[image:image-20230131145708-3.png]]
860 860  
861 -~1. Please set it to mod1
862 862  
863 -2. Please set the command [[AT+PROBE>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/PS-LB%20--%20LoRaWAN%20Pressure%20Sensor/#H3.3.4SettheProbeModel]] according to the model of your sensor
853 +=== 4.3.1 ​Battery Note ===
864 864  
865 -3. Check the connection status of the sensor
866 866  
856 +The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
867 867  
858 +
859 +=== 4.3.2 Replace the battery ===
860 +
861 +
862 +You can change the battery in the PS-LB.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
863 +
864 +The default battery pack of PS-LB includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
865 +
866 +
867 += 5. Remote Configure device =
868 +
869 +== 5.1 Connect via BLE ==
870 +
871 +
872 +Please see this instruction for how to configure via BLE: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]]
873 +
874 +
875 +== 5.2 AT Command Set ==
876 +
877 +
878 +
879 += 6. OTA firmware update =
880 +
881 +
882 +Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
883 +
884 +
885 += 7. FAQ =
886 +
887 +== 7.1 How to use AT Command to access device? ==
888 +
889 +
890 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
891 +
892 +
893 +== 7.2 How to update firmware via UART port? ==
894 +
895 +
896 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
897 +
898 +
899 +== 7.3 How to change the LoRa Frequency Bands/Region? ==
900 +
901 +
902 +You can follow the instructions for [[how to upgrade image>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]].
903 +When downloading the images, choose the required image file for download. ​
904 +
905 +
868 868  = 8. Order Info =
869 869  
870 870  
... ... @@ -885,13 +885,11 @@
885 885  * Package Size / pcs : cm
886 886  * Weight / pcs : g
887 887  
888 -
889 -
890 890  = 10. Support =
891 891  
892 892  
893 893  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
894 894  
895 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
931 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
896 896  
897 897  
image-20230426085320-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content