PB01 -- LoRaWAN Button User Manual

The (% style="color:blue" %)**PB01 LoRaWAN Push Button**(%%) is a wireless LoRaWAN device equipped with (% style="color:blue" %)**a single push button**(%%). When the user presses the button, the PB01 sends an uplink to the LoRaWAN Network Server using the long-range LoRaWAN wireless protocol. Additionally, the PB01 measures (% style="color:blue" %)**environment temperature & humidity**(%%) and periodically uplinks this data to the LoRaWAN Network Server.

26

27

The PB01 is powered by (% style="color:blue" %)**2 x AAA batteries**(%%), allowing it to operate for several years.* Users can easily replace the batteries once they are drained.

28

29

The PB01 also features a built-in speaker that can produce different sounds when the button is pressed or when a reply (downlink) is received from the Network Server. The speaker can be disabled if the user prefers.

30

31

The PB01 is fully compatible with the LoRaWAN v1.0.3 protocol, and works seamlessly with standard LoRaWAN gateways.

32

33

~* Battery life depends on the frequency of data transmission. Please refer to the [[battery analyzer>>||anchor="H4.2A0PowerConsumptionAnalyze"]] for details.

== 1.2 Features ==

* Wall-mountable

* LoRaWAN v1.0.3 protocol, Class A mode

41

* 1 x push button (available in different colors)

42

* Built-in temperature and humidity sensor

43

* Built-in speaker

44

* Frequency bands: CN470, EU433, KR920, US915, EU868, AS923, AU915

45

* AT commands for parameter changes

46

* Remote parameter configuration via LoRaWAN downlink

47

* Firmware upgradable via programming port

48

* Supports 2 x AAA LR03 batteries

49

* IP rating: IP52

50

51

== 1.3 Specification ==

52

53

54

(% style="color:blue" %)**Built-in Temperature Sensor:**

55

56

* **Resolution**: 0.01 °C

57

* **Accuracy Tolerance**: Typ ±0.2 °C

58

* **Long-Term Drift**: < 0.03 °C/year

59

* **Operating Range**: -10 ~~ 50 °C or -40 ~~ 60 °C (depends on battery type; see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])

60

61

(% style="color:blue" %)**Built-in Humidity Sensor:**

62

63

* **Resolution**: 0.01 %RH

64

* **Accuracy Tolerance**: Typ ±1.8 %RH

65

* **Long-Term Drift**: < 0.2 %RH/year

66

* **Operating Range**: 0 ~~ 99.0 %RH (no dew)

67

68

== 1.4 Power Consumption ==

69

70

71

PB01 : Idle: 5 uA, Transmit: max 110 mA

72

73

74

== 1.5 Storage & Operation Temperature ==

75

76

77

-10 ~~ 50 °C or -40 ~~ 60 °C (depends on battery type; see [[FAQ>>||anchor="H6.5Whyiseedifferentworkingtemperatureforthedevice3F"]])

78

79

80

== 1.6 Applications ==

81

82

83

* Smart buildings & home automation

84

* Logistics & supply chain management

* Smart metering

* Smart agriculture

* Smart cities

* Smart factories

= 2. Operation Mode =

91

92

== 2.1 How It Works? ==

93

94

95

Each PB01 is shipped with registration information that can be used to register and activate the device with a LoRaWAN Network Server using Over-The-Air Activation (OTAA), which is the most secure method for activating an end device on a LoRaWAN Network Server. It also supports Activation-By-Personalization (ABP), but this method is not recommended as it is less secure.

96

97

After registration, if the PB01 is within the LoRaWAN network's coverage area, it can join the network and start transmitting sensor data to the LoRaWAN Network Server. The default uplink interval is **20 minutes**.

98

99

100

== 2.2 How to turn on PB01? ==

101

102

103

(% style="color:red" %)** 1. Open the enclosure from the bottom.**

104

105

[[image:image-20220621093835-1.png]]

106

107

108

(% style="color:red" %)** 2. Insert 2 x AAA LR03 batteries to turn on the device.**

109

110

[[image:image-20220621093835-2.png]]

111

112

113

(% style="color:#ff0000" %)** 3. After **(% style="caret-color:#ff0000; color:#ff0000" %)**activating with a LoRaWAN network**(% style="color:#ff0000" %)**, you can re-join/restart the device by long pressing the ACT button as shown in the image below.**

114

115

[[image:image-20220621093835-3.png]]

116

117

You can check the [[LED Status>>||anchor="H2.8LEDIndicator"]] to determine the working state of the PB01.

118

119

120

== 2.3 Registering with a LoRaWAN network ==

121

122

123

This section explains how to register the PB01 with a LoRaWAN Network Server, such as The Things Stack Cloud. After registering, the PB01 can join the network once you long-press the ACT button.

124

125

(% _mstvisible="1" class="wikigeneratedid" %)

126

The following network diagram shows how the PB01 communicates with The Things Stack Cloud (similarly to other LoRaWAN Network Servers) end to end.

127

128

129

[[image:pb01-ttn.jpg]]

130

131

132

Each PB01 is shipped with its unique registration information printed on a sticker affixed inside the cardboard package that the device is packed in. The registration information includes the following:

* DevEUI

* AppEUI

* AppKey

This information is required to perform the OTAA (Over-the-Air Activation) of the device, which is the most secure way of activating the device with a LoRaWAN network server.

139

140

[[image:image-20230426083617-1.png||height="294" width="633"]]

141

142

143

=== 2.3.1 Add PB01 to The Things Stack ===

144

145

146

PB01 currently supports only **manual **registartion with The Things Stack.

147

148

149

==== 2.3.1.1 Creating an application ====

150

151

152

Sign up for a free account with [[The Things Stack Sandbox>>url:https://eu1.cloud.thethings.network/]] if you do not have one yet. Then, create an **application **as shown in the screenshots below.

153

154

155

==== 2.3.1.2 Adding manually ====

156

157

158

You can refer to the screenshots below to register your PB01 using The Things Stack's manual registration option.

159

160

On The Things Stack console:

161

162

* Click **Applications**.

163

* Click <**your application**>. E.g. dragino-docs

164

* Click **End devices**.

165

* Click **+ Register end devic**e button.

[[image:5.png]]

* Select **Enter end device specifies manually** option.

171

* **Frequency plan**: Select the frequency plan that matches your device. E.g.: Europe 863-870 MHz (SF9 for RX2 - recommended).

172

* **LoRaWAN version**: LoRaWAN Specification 1.0.3

173

* Regional Parameters version: You can't change it and it will select automatically.

[[image:2.png]]

* **JoinEUI**: Enter the **AppEUI** of the device (see the registration information sticker) and Click the **Confirm** button.

179

* **DevEUI**: Enter the DevEUI of the device (see the registration information sticker).

180

* **AppKey**: Enter the AppKey of the device (see the registration information sticker).

181

* **End device ID**: Enter a name for your end device to uniquely identify it within this application.

182

* Click **View registered end device** option.

183

* Click **Register end device** button.

[[image:3.png]]

You will be navigated to the **Device overview **page.

189

(% style="display:none" %)

190

191

192

==== 2.3.1.3 Activate the PB01 ====

193

194

195

Long press the **ACT** button to activate the PB01. It will then join The Things Stack. Once successfully connected, the device will begin uplinking sensor data to The Things Stack, which can be viewed on the **Live data** panel.

196

197

[[image:image-20240507143104-5.png||height="434" width="1398"]]

198

199

200

== 2.4 Uplink Payload ==

201

202

203

Uplink payloads include two types: Valid Sensor Value and other status / control command.

204

205

* Valid Sensor Value: Use FPORT=2

206

* Other control command: Use FPORT other than 2.

207

208

=== 2.4.1 Uplink FPort~=5, Device Status ===

209

210

211

The 'Device Status' uplink is sent by the PB01 as its first uplink after successfully joining a LoRaWAN network. However, you can manually retrieve the device status as an uplink by sending a command as a downlink to the device. The format of the downlink command should be in hexadecimal.

212

213

(% style="color:#4472c4" %)**Downlink: **(%%)**0x2601 **

214

215

The device uplinks its status via FPort=5, and the payload format is as follows:

216

217

(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:370px" %)

218

|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**Size(bytes)(% style="display:none" %) (%%)**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 60px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 30px;background-color:#4F81BD;color:white" %)**2**

219

220

221

The following figure shows the decoded device status payload as displayed on The Things Stack.

222

223

[[image:image-20240507152130-12.png||height="469" width="1366"]](% style="display:none" %)

224

225

226

For example, if the device status uplink includes the payload, [[image:image-20240507152254-13.png||height="26" width="130"]]

227

228

229

(% style="color:#4472c4" %)**Sensor model**(%%): 0x35 - for PB01, this value is 0x35.

230

231

(% style="color:#4472c4" %)**Firmware version**(%%): 0x0100 - value 0x0100 means v1.0.0.

232

233

(% style="color:#4472c4" %)**Frequency band**(%%): 01 - means EU868. The following are the possible values for other frequency bands.

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0A: AS923-3

(% style="color:#4472c4" %)**Sub band**(%%): 0xFF - value 0x00 ~~ 0x08 (only for CN470, AU915, US915. Others are 0x00)

256

257

(% style="color:#4472c4" %)**BAT**(%%): 0x 0CDE - represents the battery voltage for PB01. The values 0x0CDE means 3294 mV = 3.294 V

258

259

260

=== 2.4.2 Uplink FPort~=2, Real time sensor values ===

261

262

263

The PB01 sends real time sensor values after the Device Status uplink. The device will continue to send this uplink periodically. The default interval is 20 minutes, but it can be changed.

264

265

This type of uplink uses FPort=2 and, by default, is sent every 20 minutes. The default uplink interval [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]] using AT commands.

266

267

(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460px" %)

268

|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((

269

**Size(bytes)**

270

)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)2|=(% style="width: 140px;background-color:#4F81BD;color:white" %)(((

271

**1**

272

)))|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((

273

**1**

274

)))|=(% style="width: 90px;background-color:#4F81BD;color:white" %)(((

275

**2**

276

)))|=(% style="width: 50px;background-color:#4F81BD;color:white" %)(((

277

**2**

278

)))

279

|(% style="width:97px" %)(((

280

Value

281

)))|(% style="width:39px" %)Battery|(% style="width:39px" %)(((

282

Sound_ACK & Sound_key

283

)))|(% style="width:100px" %)(((

(((

Alarm

)))

)))|(% style="width:77px" %)(((

(((

Temperature

)))

)))|(% style="width:47px" %)(((

Humidity

)))

The following figure shows the decoded real time sensor values payload as displayed on The Things Stack.

296

297

[[image:image-20240507150155-11.png||height="549" width="1261"]]

298

299

300

For example, if the real time sensor values uplink includes the payload (FPort=2): (% style="background-color:yellow" %)**0C EA 03 01 01 11 02 A8**

301

302

303

==== (% style="color:blue" %)**Battery:**(%%) ====

304

305

Byte 1 and 2: Check the battery voltage.

306

307

* Example 1: 0x0CEA = 3306mV

308

* Example 2: 0x0D08 = 3336mV

309

310

==== (% style="color:blue" %)**Sound_ACK & Sound_key:**(%%) ====

311

312

Byte 3: Key sound and ACK sound are enabled by default.

* Example1: 0x03

Sound_ACK: (03>>1) & 0x01=1, OPEN.

317

318

**~ ** Sound_key: 03 & 0x01=1, OPEN.

* Example 2: 0x01

Sound_ACK: (01>>1) & 0x01=0, CLOSE.

323

324

**~ ** Sound_key: 01 & 0x01=1, OPEN.

325

326

327

==== (% style="color:blue" %)**Alarm:**(%%) ====

Byte 4: Key alarm.

* Example 1: 0x01 & 0x01=1, TRUE.

332

* Example 2: 0x00 & 0x01=0, FALSE.

333

334

==== (% style="color:blue" %)**Temperature:**(%%) ====

335

336

Byte 5 and 6: Temperature.

337

338

* Example 1: 0x0111/10=27.3°C

339

* Example 2: (0xFF0D-65536)/10=-24.3°C

340

341

If payload is: FF0D : (FF0D & 8000 == 1) , temp = (FF0D - 65536)/100 =-24.3°C

342

343

(FF0D & 8000 : Check whether the highest bit is 1. If the highest bit is 1, the value is negative)

344

345

346

==== (% style="color:blue" %)**Humidity:**(%%) ====

347

348

Byte 7 and 8: Humidity

349

350

* Humidity: 0x02A8/10=68.0%

351

352

=== 2.4.3 Uplink FPort~=3, Datalog sensor value ===

353

354

355

PB01 stores sensor values, and you can retrieve these historical values via a downlink command. The Datalog sensor values are sent via FPort=3.

356

357

[[image:image-20240510144912-1.png||height="471" width="1178"]](% style="display:none" %)

358

359

360

Each data entry is 11 bytes. To save airtime and battery, the maximum payload size is depending on the current Date Rate and the frequency band.(% style="display:none" %) (%%) For example, in US915 band, the maximum payload for different DR is as follows:

361

362

1. **DR0**: maximum payload is 11 bytes. The device will uplink one entry of data.

363

1. **DR1**: maximum payload is 53 bytes. The device will upload 4 entries of data (total of 44 bytes)

364

1. **DR2**: A payload includes 11 entries of data

365

1. **DR3**: A payload includes 22 entries of data.

366

367

(% style="color:red" %)**Note: The PB01 will save 178 sets of historical data. If the device doesn't have any data during the polling time, it will uplink 11 bytes of 0s.**

368

369

See [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]] for more information.

370

371

(% style="display:none" %) (%%)

372

373

=== 2.4.4 Decoding the payload in The Things Stack Cloud ===

374

375

376

In the LoRaWAN protocol, the uplink payload uses HEX format to store data. You need to add a payload formatter or decoder in the LoRaWAN server to extract each field and convert them into readable values.

377

378

The following figure shows how to add the uplink payload formatter in The Things Stack. The uplink decoder for PB01 can be found here: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]

379

380

Select your **end device**, then click the **Payload Formatters **tab, followed by the **Uplink** tab. Next, select '**Custom Javascript Formatte**r' from the '**Formatter Type**' dropdown list. Finally, paste the payload formatter in the '**Formatter Code**' box and click the '**Save Changes**' button.

381

382

[[image:image-20240507162814-16.png||height="778" width="1135"]]

383

384

385

== 2.5 Show data on Datacake ==

(((

The Datacake IoT platform contains a user-friendly interface for displaying sensor data. Once sensor data is available in The Things Stack, Datacake can be used to connect to The Things Stack and visualize the data.

)))

(((

We assume that you have successfully registered and activated your PB01 with The Things Stack Cloud. To configure your application to forward data to Datacake, you will need to add an integration. Follow the steps below:

)))

(((

Go to The Things Stack Cloud Console ~-~-> Applications ~-~-> Integrations ~-~-> Webhooks.

)))

(((

~1. Select Datacake:

)))

(((

2. Select default key as Access Key:

)))

(((

3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add PB01:

)))

(((

Please refer to the figure below.

416

)))

417

418

[[image:image-20240510150924-2.png||height="612" width="1186"]]

Log in to your **Datacake** account. In the left navigation, click on **Account Settings**. On the Account Settings page, in the **API Token** tab, copy the **API token** by clicking the **Copy** button.

423

424

[[image:image-20240510151944-3.png||height="581" width="1191"]]

425

426

427

In the **Webhook ID** textbox, type a name to identify your webhook.

428

429

Paste the **Datacake API Token** you copied into the **Token** textbox.

430

431

Click **Create Datacake webhook** button.

432

433

[[image:image-20240510152150-4.png||height="697" width="1188"]]

434

435

436

In the Datacake Device page, select **+ Add Device** button.

437

438

[[image:image-20240510152300-5.png||height="298" width="1191"]]

439

440

441

In the Add Device window, select **LoRaWAN** as the connectivity type for the PB01

442

443

[[image:image-20240510152355-6.png||height="782" width="1193"]]

444

445

446

Select the **New Product** option and then provide a **name** for your device in the **Product Name**, for example pb01-1.

447

448

[[image:image-20240510152542-8.png||height="545" width="739"]]

449

450

[[image:image-20240510152634-9.png||height="748" width="740"]]

451

452

453

[[image:image-20240510152809-10.png||height="607" width="732"]]

454

455

[[image:image-20240510153934-14.png||height="460" width="1199"]]

456

457

458

[[image:image-20240510153435-12.png||height="428" width="1197"]]

459

460

461

Copy and paste the [[TTN decoder>>https://github.com/dragino/dragino-end-node-decoder]] here and save.

462

463

[[image:image-20240510153624-13.png||height="468" width="1195"]]

464

465

Visual widgets please read the DATACAKE documentation.

466

467

(% style="display:none" %) (%%)

468

469

== 2.6 Datalog Feature ==

470

471

472

(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)

473

To retrieve a sensor value, you can send a poll command from the network server to request the sensor to send the value within the required time period.

474

475

476

=== 2.6.1 Unix Timestamp ===

477

478

479

The Unix timestamp indicates the sampling time of the uplink payload, based on the following format:

480

481

[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]

482

483

You can get this time from the link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :

484

485

For example, if the Unix timestamp is in HEX format as 0x60137afd, you can convert it to decimal: 1611889405, and then convert it to the time: 2021-Jan-29, Friday, 03:03:25 (GMT).

486

487

[[image:1655782409139-256.png]]

488

489

490

=== 2.6.2 Poll sensor value ===

(((

You can poll sensor values based on timestamps from the server. The start and end timestamps use the Unix timestamp format as mentioned above. The device will reply with all data logs from this time period, using the uplink interval.

)))

(((

For example, if the downlink command is: [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)

)))

(((

**0x31 **: Prefix

**0x5FC5F350** and **0x5FC60160 **: This is equivalent to checking the stored data between **2020/12/1 07:40:00** and **2020/12/1 08:40:00**.

505

506

**0x05 **: The uplink interval is 5 seconds, which means the PB01 will send one packet every 5 seconds. The uplink interval can be mentioned in the downlink payload with a range of 5 to 255 seconds.

)))

=== 2.6.3 Datalog Uplink payload ===

511

512

513

See [[Uplink FPort=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPort3D32CDatalogsensorvalue"]]

514

515

(% style="display:none" %) (%%) (% style="display:none" %)

== 2.7 Buttons ==

* **ACT button**

Long press this button, and the PB01 will reset and rejoin the network.

523

524

[[image:image-20240510161626-17.png||height="192" width="224"]]

* **Alarm button**

Press this button to immediately send an uplink, and the alarm will be set to 'TRUE'.

530

531

[[image:image-20240705095149-5.png||height="164" width="162"]](% style="display:none" %)

532

533

534

== 2.8 LED Indicators ==

(((

The PB01 has a single LED that displays different colors to indicate various stages:

539

540

1. **Hold the ACT button:** The LED will light up GREEN. GREEN flashing indicates the node is restarting. A BLUE flash signals a request for network access, and a solid GREEN light for 5 seconds signifies successful network access.

541

1. (((

542

**Normal Working State:**

543

544

* When the node restarts, hold the ACT button, and the LED will turn GREEN. GREEN flashing indicates a restart. A BLUE flash signals a request for network access, and a solid GREEN light for 5 seconds indicates successful network access.

545

)))

546

1. (((

547

**During OTAA Join:**

548

549

* For each Join Request uplink, the LED will blink GREEN once.

550

* Once the join is successful, the LED will remain solid GREEN for 5 seconds.

551

* After joining, for each uplink, the LED will blink either BLUE or GREEN.

)))

1. (((

**Alarm Button:**

* When the alarm button is pressed, the LED will flash RED until the node receives an acknowledgment (ACK) from the platform, followed by the LED staying BLUE for 5 seconds.

)))

)))

(((

)))

== 2.9 Buzzer ==

The PB01 produces different sounds or tones for the following events, which can be turned on or off using the [[AT+SOUND>>||anchor="H3.3A0SetbuttonsoundandACKsound"]] command.

568

569

* **Button Sound:** This is the tone produced by the node after the alarm button is pressed. Users can use the [[AT+OPTION>>||anchor="H3.4A0Setbuzzermusictype2807E429"]] command to set different button sounds.

570

* **ACK Sound:** This is the notification tone emitted when the node receives an acknowledgment (ACK).

571

572

= 3. Configure PB01 via AT command or LoRaWAN downlink =

573

574

575

You can configure PB01 via AT Commands or LoRaWAN Downlinks.

576

577

* See [[FAQ>>||anchor="H6.FAQ"]] to find out how to connect PB01 with a computer to configure it using AT commands.

578

579

* LoRaWAN Downlink instruction for different platforms can be found at: [[IoT LoRaWAN Server>>doc:Main.WebHome]]

580

581

(% style="display:none" %)

582

583

There are two types of commands to configure the PB01:

584

585

1. (((

586

**General Commands:**

587

These commands are used to configure:

588

589

* General system settings, such as the uplink interval.

590

* LoRaWAN protocol and radio-related parameters.

591

592

These commands are the same for all Dragino devices that support the DLWS-005 LoRaWAN stack (Note~*~*). You can find these commands on the wiki: [[End Device Downlink Command>>path:#]].

593

)))

594

1. **Commands Specifically Designed for PB01:**

595

These commands are valid only for the PB01, as listed below (see Downlink Commands):

596

597

== 3.1 Downlink Commands ==

598

599

600

(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)

601

|=(% style="width: 130px; background-color: rgb(79, 129, 189); color: white;" %)**Command Example**|=(% style="width: 150px; background-color: rgb(79, 129, 189); color: white;" %)**Function**|=(% style="width: 90px; background-color: rgb(79, 129, 189); color: white;" %)**Response**|=(% style="width: 140px; background-color: rgb(79, 129, 189); color: white;" %)**Downlink**

602

|(% style="width:130px" %)AT+TDC=?|(% style="width:151px" %)(((

603

Get the current TDC (uplink) time

604

)))|(% style="width:92px" %)(((

605

1200000

606

OK

607

)))|(% style="width:206px" %)Default 1200000(ms)

608

|(% style="width:130px" %)AT+TDC=300000|(% style="width:151px" %)Set the TDC (uplink) time|(% style="width:92px" %)OK|(% style="width:206px" %)(((

(((

0x0100012C:

01: Prefix

00012C: 0X00012C=300(seconds)

)))

(((

)))

)))

|(% style="width:130px" %)ATZ|(% style="width:151px" %)Reset the node|(% style="width:92px" %) |(% style="width:206px" %)0x04FF

620

|(% style="width:130px" %)AT+FDR|(% style="width:151px" %)Restore to factory settings|(% style="width:92px" %) |(% style="width:206px" %)0x04FE

621

|(% style="width:130px" %)AT+CFM=?|(% style="width:151px" %)View the current confirmation mode status|(% style="width:92px" %)(((

622

0,7,0

623

OK

624

)))|(% style="width:206px" %)Default 0,7,0

625

|(% style="width:130px" %)AT+CFM=1,7,1|(% style="width:151px" %)(((

626

Confirmed uplink mode, the maximum number of retries is seven, and uplink fcnt increase by 1 for each retry

627

)))|(% style="width:92px" %)(((

628

OK

629

)))|(% style="width:206px" %)(((

05010701

05: fixed command

01:confirmed uplink

07: retry 7 times

01: fcnt count plus 1

635

)))

636

|(% style="width:130px" %)AT+NJM=?|(% style="width:151px" %)(((

637

Check the current network connection method

638

)))|(% style="width:92px" %)(((

639

1

640

OK

641

)))|(% style="width:206px" %)Default 1

642

|(% style="width:130px" %)AT+NJM=0|(% style="width:151px" %)Change the network connection method to ABP|(% style="width:92px" %)(((

643

Attention:Take effect after ATZ

644

OK

645

)))|(% style="width:206px" %)(((

0x2000: ABP

0x2001: OTAA

20: fixed command

)))

|(% style="width:130px" %)AT+RPL=?|(% style="width:151px" %)View current RPL settings|(% style="width:92px" %)(((

651

0

652

OK

653

)))|(% style="width:206px" %)Default 0

654

|(% style="width:130px" %)AT+RPL=1|(% style="width:151px" %)Set RPL=1 |(% style="width:92px" %)OK|(% style="width:206px" %)(((

655

0x2101:

656

21: fixed command

657

01: for details, check wiki

658

)))

659

|(% style="width:130px" %)AT+ADR=?|(% style="width:151px" %)View current ADR status|(% style="width:92px" %)(((

660

1

661

OK

662

)))|(% style="width:206px" %)Default 0

663

|(% style="width:130px" %)AT+ADR=0|(% style="width:151px" %)Set the ADR state to off|(% style="width:92px" %)OK|(% style="width:206px" %)(((

0x2200: close

0x2201: open

22: fixed command

)))

|(% style="width:130px" %)AT+DR=?|(% style="width:151px" %)View the current DR settings|(% style="width:92px" %)OK|(% style="width:206px" %)

669

|(% style="width:130px" %)AT+DR=1|(% style="width:151px" %)(((

670

Set DR to 1.

671

It takes effect only when ADR=0

672

)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((

0x22000101:

00: ADR=0

01: DR=1

01: TXP=1

22: fixed command

)))

|(% style="width:130px" %)AT+TXP=?|(% style="width:151px" %)View the current TXP|(% style="width:92px" %)OK|(% style="width:206px" %)

680

|(% style="width:130px" %)AT+TXP=1|(% style="width:151px" %)(((

681

Set TXP to 1.

682

It takes effect only when ADR=0

683

)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((

0x22000101:

00: ADR=0

01: DR=1

01: TXP=1

22: fixed command

)))

|(% style="width:130px" %)AT+RJTDC=10|(% style="width:151px" %)Set RJTDC time interval|(% style="width:92px" %)OK|(% style="width:206px" %)(((

0x26000A:

26: fixed command

000A: 0X000A=10(min)

for details, check wiki

695

)))

696

|(% style="width:130px" %) |(% style="width:151px" %)(((

697

(((

698

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

699

700

Retrieve stored data for a specified period of time

)))

(((

)))

)))|(% style="width:92px" %) |(% style="width:206px" %)(((

707

0x3161DE7C7061DE8A800A:

708

31: fixed command

709

61DE7C70:0X61DE7C70=2022/1/12 15:00:00

710

61DE8A80:0X61DE8A80=2022/1/12 16:00:00

0A: 0X0A=10(second)

View details 2.6.2

)))

|(% style="width:130px" %)AT+DDETECT=?|(% style="width:151px" %)View the current DDETECT setting status and time|(% style="width:92px" %)(((

715

1,1440,2880

716

OK

717

)))|(% style="width:206px" %)Default 1,1440,2880(min)

718

|(% style="width:130px" %)AT+DDETECT=(((

719

1,1440,2880

720

)))|(% style="width:151px" %)(((

721

Set DDETECT setting status and time

722

((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))

723

)))|(% style="width:92px" %)OK|(% style="width:206px" %)(((

0x320005A0: close

0x320105A0: open

32: fixed command

05A0: 0X05A0=1440(min)

728

)))

729

730

== 3.2 Set Password ==

731

732

733

**Feature**: Set the device password with a maximum of 9 digits.

734

735

(% style="color:#4f81bd" %)**AT command:**

736

737

(% border="2" style="width:500px" %)

738

|(% style="width:141px" %)**Command**|(% style="width:357px" %)**AT+PWORD**

739

|(% style="width:141px" %)**Parameters**|(% style="width:357px" %)**password** : maximum up to 9 digits

740

|(% style="width:141px" %)**Get**|(% style="width:357px" %)AT+PWORD=?

741

|(% style="width:141px" %)**Response**|(% style="width:357px" %)(((

742

Returns the current password

743

OK

744

)))

745

|(% style="width:141px" %)**Set**|(% style="width:357px" %)AT+PWORD=<password>

746

|(% style="width:141px" %)**Response**|(% style="width:357px" %)OK

747

|(% style="width:141px" %)**Example**|(% style="width:357px" %)(((

748

AT+PWORD=999999999

749

Set the password 999999999

750

)))

751

752

(% style="color:#4f81bd" %)**Downlink command:**

753

754

There is no downlink command for this feature.

755

756

757

== 3.3 Set button sound and ACK sound ==

758

759

760

**Feature**: Turn on/off button sound and ACK alarm.

761

762

(% style="color:#4f81bd" %)**AT command:**

763

764

(% border="2" style="width:500px" %)

765

|(% style="width:143px" %)**Command**|(% style="width:355px" %)**AT+SOUND**

766

|(% style="width:143px" %)**Parameters**|(% style="width:355px" %)(((

**button_sound** :

**0** - off

**1** - on

**ack_sound** :

**0** - off

**1** - on

)))

|(% style="width:143px" %)**Get**|(% style="width:355px" %)AT+SOUND=?

775

|(% style="width:143px" %)**Response**|(% style="width:355px" %)(((

776

Returns the current sound settings. <button_sound>,<ack_sound>

777

OK

778

)))

779

|(% style="width:143px" %)**Set**|(% style="width:355px" %)(((

780

AT+SOUND=<button_sound>,<ack_sound>

781

)))

782

|(% style="width:143px" %)**Response**|(% style="width:355px" %)OK

783

|(% style="width:143px" %)**Example**|(% style="width:355px" %)(((

784

AT+SOUND=0,1

785

This will turn off the button sound and turn on the ACK sound.

786

)))

787

788

(% style="color:#4f81bd" %)**Downlink command:**

789

790

(% border="2" style="width:500px" %)

791

|(% style="width:143px" %)**Prefix**|(% style="width:355px" %)**0xA1**

792

|(% style="width:143px" %)**Parameters**|(% style="width:355px" %)(((

793

**button_sound** : 1 byte in hexadecimal.

794

**00** - off

795

**01** - on

796

**ack_sound** : 1 byte in hexadecimal.

**00** - off

**01** - on

)))

|(% style="width:143px" %)**Payload format**|(% style="width:355px" %)<prefix><button_sound><ack_sound>

801

|(% style="width:143px" %)**Example**|(% style="width:355px" %)(((

802

A10001

803

Turn off the button sound and turn on ACK sound.

804

)))

805

806

== 3.4 Set buzzer music type (0~~4) ==

807

808

809

Feature: Set different alarm key response sounds.There are five different types of button music.

810

811

(% style="color:#4f81bd" %)**AT Command:**

812

813

(% border="2" style="width:500px" %)

814

|(% style="width:146px" %)**Command**|(% style="width:352px" %)**AT+OPTION**

815

|(% style="width:146px" %)**Parameters**|(% style="width:352px" %)(((

816

**<buzzer_music_type> :**

**0**

**1**

**2**

**3**

)))

|(% style="width:146px" %)**Get**|(% style="width:352px" %)AT+OPTION=?

823

|(% style="width:146px" %)**Response**|(% style="width:352px" %)(((

824

Return the current music type.

825

OK

826

)))

827

|(% style="width:146px" %)**Set**|(% style="width:352px" %)AT+OPTION=<buzzer_music_type>

828

|(% style="width:146px" %)**Response**|(% style="width:352px" %)OK

829

|(% style="width:146px" %)**Example**|(% style="width:352px" %)(((

830

AT+OPTION=1

831

Set the buzzer music to type 1

832

)))

833

834

(% style="color:#4f81bd" %)**Downlink command:**

835

836

(% border="2" style="width:500px" %)

837

|(% style="width:145px" %)**Prefix**|(% style="width:353px" %)**0xA3**

838

|(% style="width:145px" %)**Parameters**|(% style="width:353px" %)(((

839

**<buzzer_music_type> : **1 byte in hexadecimal

**0**

**1**

**2**

**3**

)))

|(% style="width:145px" %)**Payload format**|(% style="width:353px" %)<prefix><buzzer_music-type>

846

|(% style="width:145px" %)**Example**|(% style="width:353px" %)(((

847

A300

848

Set the buzzer music to type 0.

849

)))

850

851

== 3.5 Set Button Press Time ==

852

853

854

**Feature**: Set the holding time for pressing the alarm button to prevent accidental activation. The values range from 0 to 1000 ms.

855

856

(% style="color:#4f81bd" %)**AT Command:**

857

858

(% border="2" style="width:500px" %)

859

|(% style="width:145px" %)**Command**|(% style="width:353px" %)**AT+STIME**

860

|(% style="width:145px" %)**Parameters**|(% style="width:353px" %)**button_press_duration** : in milliseconds

861

|(% style="width:145px" %)**Get**|(% style="width:353px" %)AT+STIME=?

862

|(% style="width:145px" %)**Response**|(% style="width:353px" %)Returns the current button press duration.

863

|(% style="width:145px" %)**Set**|(% style="width:353px" %)(((

864

AT+STIME=<button_press_duration>

865

)))

866

|(% style="width:145px" %)**Response**|(% style="width:353px" %)OK

867

|(% style="width:145px" %)**Example**|(% style="width:353px" %)(((

868

AT+STIME=1000

869

Set the button sound duration to 1000 ms.

870

)))

871

872

(% style="color:#4f81bd" %)**Downlink Command:**

873

874

(% border="2" style="width:500px" %)

875

|(% style="width:146px" %)**Prefix**|(% style="width:352px" %)**0xA2**

876

|(% style="width:146px" %)**Parameters**|(% style="width:352px" %)**button_press_duration** : in milliseconds, 2 bytes in hex

877

|(% style="width:146px" %)**Payload format**|(% style="width:352px" %)<prefix><button_press_duration>

878

|(% style="width:146px" %)**Example**|(% style="width:352px" %)(((

879

A203E8

880

Hold the alarm button for 10 seconds before the node sends the alarm uplink packet.

)))

= 4. Battery =

PB01 uses 2xAAA LR03 (1.5V) batteries.

887

888

889

== 4.1 Replacing batteries ==

890

891

892

If the batteries are running low (if the battery voltage drops to 2.1V), you can use any two generic AAA batteries to replace them.

893

894

(% style="color:red" %)**Note: **

895

896

1. The PB01 doesn't have any screws; you can use a nail to open the battery cover.

897

898

[[image:image-20220621143535-5.png]]

899

900

901

2. Make sure the direction is correct when installing the AAA batteries.

902

903

[[image:image-20220621143535-6.png]]

904

905

906

== 4.2 Power Consumption Analysis ==

907

908

909

Dragino's battery-powered products all operate in Low Power mode. We provide an updated battery calculator based on real device measurements. You can use this calculator to estimate battery life and calculate it for different transmission intervals.

910

911

**Instructions for use:**

912

913

**Step 1:** Download the latest version of the **DRAGINO_Battery_Life_Prediction_Table.xlsx** from the [[battery calculator>>https://www.dropbox.com/sh/sxrgszkac4ips0q/AAA4XjBI3HAHNpdbU3ALN1j0a/Battery%20Document/Battery_Analyze?dl=0&subfolder_nav_tracking=1]].

914

915

**Step 2:** Open the file and select:

* Product Model

* Uplink Interval

* Working Mode

The expected battery life for different scenarios will be displayed on the right.

922

923

[[image:image-20220621143643-7.png||height="429" width="1326"]]

= 5. Accessories =

* (((

**AS-02 USB Type-C Converter**

931

932

The AS-02 is an optional accessory. It is a USB Type-C converter that provides access to the AT console of the PB01 when used with a USB-TTL adapter. For more details, see this [[link>>||anchor="H6.1HowtouseATCommandtoconfigurePB01"]].

933

)))

934

935

[[image:image-20220621141724-3.png]]

= 6. FAQ =

== 6.1 How to use AT Commands to configure PB01 ==

941

942

943

PB01 supports the AT Command set. Users can use a USB-to-TTL adapter along with the AS-02 USB Type-C converter to connect to the PB01 and issue AT commands, as shown below.

944

945

[[image:image-20240511085914-1.png||height="570" width="602"]]

**Connection:**

* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin

951

* (% style="background-color:yellow" %)USB to TTL RXD <~-~-> Program Converter D+ pin

952

* (% style="background-color:yellow" %)USB to TTL TXD <~-~-> Program Converter A11 pin

(((

)))

(((

On the PC, you need to set the serial tool (such as [[PuTTY>>https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to **9600** to access the serial console for the PB01. The AT commands are disabled by default, and you need to enter the password (default: **123456**) to activate them. The timeout for entering AT commands is 5 minutes; after 5 minutes, the user will need to enter the password again.

960

961

Enter the password 123456 and type "ATZ" to reboot the PB01, as shown below:

962

)))

963

964

[[image:image-20240510174509-18.png||height="572" width="791"]]

965

966

967

== 6.2 AT Commands ==

(((

* Sending "ATZ" will reboot the device.

972

* Sending "AT+FDR" will restore the device to factory settings.

973

* Get the device's AT command settings by sending "AT+CFG." The following is the output after issuing the AT+CFG command.

)))

(((

)))

(((

**Sample output:**

)))

(((

AT+DEUI=FA 23 45 55 55 55 55 51

986

987

AT+APPEUI=FF AA 23 45 42 42 41 11

988

989

AT+APPKEY=AC D7 35 81 63 3C B6 05 F5 69 44 99 C1 12 BA 95

AT+DADDR=FFFFFFFF

AT+APPSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

994

995

AT+NWKSKEY=FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

AT+ADR=1

AT+TXP=7

AT+DR=5

AT+DCS=0

AT+PNM=1

AT+RX2FQ=869525000

AT+RX2DR=0

AT+RX1DL=5000

AT+RX2DL=6000

AT+JN1DL=5000

AT+JN2DL=6000

AT+NJM=1

AT+NWKID=00 00 00 13

AT+FCU=61

AT+FCD=11

AT+CLASS=A

AT+NJS=1

AT+RECVB=0:

AT+RECV=

AT+VER=EU868 v1.0.0

AT+CFM=0,7,0

AT+SNR=0

AT+RSSI=0

AT+TDC=1200000

AT+PORT=2

AT+PWORD=123456

AT+CHS=0

AT+RX1WTO=24

AT+RX2WTO=6

AT+DECRYPT=0

AT+RJTDC=20

AT+RPL=0

AT+TIMESTAMP=systime= 2024/5/11 01:10:58 (1715389858)

AT+LEAPSEC=18

AT+SYNCMOD=1

AT+SYNCTDC=10

AT+SLEEP=0

AT+ATDC=1

AT+UUID=003C0C53013259E0

1074

1075

AT+DDETECT=1,1440,2880

AT+SETMAXNBTRANS=1,0

AT+DISFCNTCHECK=0

AT+DISMACANS=0

AT+PNACKMD=0

AT+SOUND=0,0

AT+STIME=0

AT+OPTION=3

)))

(((

**Example:**

)))

[[image:image-20240511091518-2.png||height="601" width="836"]]

1099

1100

1101

== 6.3 How to upgrade the firmware? ==

1102

1103

1104

PB01 requires a USB-to-TTL adapter along with the AS-02 USB Type-C converter to upload a new firmware image to PB01: Upgrading the device firmware,

1105

1106

* supports new features

1107

* fixes bugs

1108

* allows change the LoRaWAN frequency bands.

1109

1110

The PB01 is shipped with firmware preloaded. The firmware is divided into a bootloader and a work program.

1111

1112

If the bootloader is erased for any reason, you will need to download the firmware (which includes both the bootloader and the work program).

1113

1114

The latest firmware version for the PB01 can be downloaded from this link: [[firmware>>url:https://www.dropbox.com/scl/fo/y7pvm58wcr8319d5o4ujr/APZtqlbzRCNbHoPWTmmMMWs?rlkey=wfh93x2dhcev3ydn0846rinf0&st=kdp6lg7t&dl=0]]

1115

1116

1117

=== 6.3.1 Update firmware (Assume device have bootloader) ===

1118

1119

1120

Follow the steps below only if the firmware needs to be updated and the bootloader of your device is not corrupted and is working properly.

1121

1122

(% style="color:blue" %)**Step 1**(%%):** Connect UART as per FAQ 6.1**

1123

1124

(% style="color:blue" %)**Step 2**(%%):** Update follow [[Instruction for update via DraginoSensorManagerUtility.exe>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H3.2.1UpdateafirmwareviaDraginoSensorManagerUtility.exe]]. **

1125

1126

1127

=== 6.3.2 Update firmware (Assume device doesn't have bootloader) ===

1128

1129

1130

Follow the steps below if the firmware needs to be updated along with the bootloader. This method is required if the bootloader of your device is corrupted.

1131

1132

Download both the bootloader and the worker program. After updating the firmware, the device will have the bootloader installed, allowing you to use the above 6.3.1 method to update the worker program.

1133

1134

1135

(% style="color:blue" %)**Step 1**(%%):** **Install [[TremoProgrammer>>url:https://www.dropbox.com/scl/fo/gk1rb5pnnjw4kv5m5cs0z/h?rlkey=906ouvgbvif721f9bj795vfrh&dl=0]] first.

1136

1137

[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220615170542-5.png?rev=1.1||alt="image-20220615170542-5.png"]]

1138

1139

(% style="color:blue" %)**Step 2**(%%): Hardware Connection

1140

1141

Connect PC and PB01 via USB-TTL adapter .

1142

1143

(% style="color:red" %)**Note: To download firmware in this way, you need to pull the boot pin(Program Converter D- pin) high to enter the burn mode. After burning, disconnect the boot pin of the node and the 3V3 pin of the USB-TTL adapter, and reset the node to exit the burning mode.**

**Connection:**

* (% style="background-color:yellow" %)USB-TTL GND <~-~-> Program Converter GND pin

1148

* (% style="background-color:yellow" %)USB-TTL RXD <~-~-> Program Converter D+ pin

1149

* (% style="background-color:yellow" %)USB-TTL TXD <~-~-> Program Converter A11 pin

1150

* (% style="background-color:yellow" %)USB-TTL 3V3 <~-~-> Program Converter D- pin

1151

1152

(% style="color:blue" %)**Step 3**(%%):** **Select the device port to be connected, baud rate and bin file to be downloaded.

1153

1154

[[image:image-20240701160913-1.png]]

1155

1156

Users need to reset the node to start downloading the program.

1157

~1. Reinstall the battery to reset the node

1158

2. Hold down the ACT button to reset the node (see [[2.7>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/PB01--LoRaWAN_Button_User_Manual/#H2.7Button]] ).

1159

1160

When this interface appears, it indicates that the download has been completed.

1161

1162

[[image:image-20240701160924-2.png]]

1163

1164

Finally, Disconnect Program Converter D- pin, reset the node again , and the node exits burning mode.

1165

1166

1167

== 6.4 How to change the LoRa Frequency Bands/Region? ==

1168

1169

1170

If you want to change the frequency band/region of your device, the only way is to** upgrade its firmware** to support the desired frequency band/region. When downloading the firmware, ensure you choose the correct image that supports the required frequency band/region.

1171

1172

We have named each firmware file to make it easy for you to identify its frequency band/region. For example, for the **EU868** band, the file name is **eu868.bin.** You can follow the instructions in the section [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]] to complete the process.

1173

1174

1175

== 6.5 Why i see different working temperature for the device? ==

1176

1177

1178

The working temperature range of device depends on the battery user choose.

1179

1180

* Normal AAA Battery can support -10 ~~ 50°C working range.

1181

* Special AAA battery can support -40 ~~ 60 °C working range. For example: [[Energizer L92>>https://data.energizer.com/pdfs/l92.pdf]]

1182

1183

= 7. Ordering Information =

== 7.1 PB01 ==

Part Number: (% style="color:#4472c4" %)PB01-LW-XX(%%) (white button) / (% style="color:#4472c4" %)PB01-LR-XX(%%)(Red Button)

1189

1190

(% style="color:#4472c4" %)**XX **(%%): The default frequency band

1191

1192

* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band

1193

* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band

1194

* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band

1195

* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band

1196

* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band

1197

* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band

1198

* (% style="color:red" %)**IN865**(%%)**: **LoRaWAN IN865 band

1199

* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band

1200

1201

= 8. Packaging Information =

1202

1203

1204

**Package Includes**:

1205

1206

* PB01 LoRaWAN Push Button x 1

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different time zones, we cannot offer live support. However, your questions will be answered as soon as possible within the aforementioned schedule.

1212

* Please provide as much information as possible regarding your inquiry (e.g., product models, an accurate description of your problem, and steps to replicate it) and send an email to [[support@dragino.com>>mailto:support@dragino.com]].

1213

1214

= 10. Reference material =

1215

1216

1217

* [[Datasheets, photos, payload decoders, firmware>>https://www.dropbox.com/scl/fo/y7pvm58wcr8319d5o4ujr/APZtqlbzRCNbHoPWTmmMMWs?rlkey=wfh93x2dhcev3ydn0846rinf0&st=kdp6lg7t&dl=0]]

= 11. FCC Warning =

**This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:**

1223

1224

(1) This device may not cause harmful interference;

1225

(2) This device must accept any interference received, including interference that may cause undesired operation.

1226

1227

Wiki source code of PB01 -- LoRaWAN Button User Manual

Applications

Navigation