LHT52 - LoRaWAN Temperature & Humidity Sensor User Manual

The Dragino LHT52 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:blue" %)**built-in Temperature & Humidity sensor** (%%)and has a USB Type-C sensor connector to connect to external sensors such as external Temperature Sensor.

27

)))

28

29

(((

30

LHT52 (% style="color:blue" %)**senses environment temperature and humidity**(%%) and send these values via long-range wireless LoRaWAN protocol. It targets professional wireless sensor network applications such as food service, smart metering, smart cities, building automation, and so on.

)))

(((

LHT52 supports(% style="color:blue" %)** 2 x AAA batteries **(%%)and works for a long time up to several years. Use can replace the batteries easily after they are finished.

)))

(((

LHT52 is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

)))

(((

LHT52 supports(% style="color:blue" %)** Datalog feature** (%%)to make sure users won't miss sensor data. It records sensor value for every uplink. These values can be retrieved by LoRaWAN server via downlink command.

)))

(((

LHT52 supports(% style="color:blue" %)** temperature alarm feature**(%%). It can uplink alarm in a short interval while temperature exceeds preset limits.

)))

(((

*Battery life depends how often to send data, please see [[battery analyzer>>||anchor="H4.2A0PowerConsumptionAnalyze"]].

51

)))

52

53

[[image:1655774519494-861.png]]

== 1.2 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

61

* Built-in Temperature & Humidity sensor

62

* Optional External Probe

63

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

64

* AT Commands to change parameters

65

* Remote configure parameters via LoRaWAN Downlink

66

* Firmware upgradable via program port

67

* Support 2 x AAA LR03 batteries.

* Datalog feature

* IP Rating: IP52

== 1.3 Specification ==

76

77

78

**Built-in Temperature Sensor:**

79

80

* Resolution: 0.01 °C

81

* Accuracy Tolerance: Typ ±0.3 °C

82

* Long Term Drift: < 0.02 °C/yr

83

* Operating Range: -20 ~~ 50 °C

84

85

**Built-in Humidity Sensor:**

86

87

* Resolution: 0.1 %RH

88

* Accuracy Tolerance: Typ ±3 %RH

89

* Long Term Drift: < 0.02 °C/yr

90

* Operating Range: 0 ~~ 99.0 %RH(no Dew)

== 1.4 Power Consumption ==

97

98

99

LHT52 (without external sensor): Idle: 5uA, Transmit: max 110mA

100

101

LHT52 + External Temperature Probe (AS-01): Idle: 6uA, Transmit: max 110mA.

== 1.5 Storage & Operation Temperature ==

-20°C to +50°C

== 1.6 Applications ==

113

114

115

* Smart Buildings & Home Automation

116

* Logistics and Supply Chain Management

* Smart Metering

* Smart Agriculture

* Smart Cities

* Smart Factory

= 2. Operation Mode =

127

128

129

== 2.1 How it work? ==

130

131

132

Each LHT52 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use LHT52 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if LHT52 is under this LoRaWAN network coverage, LHT52 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.

== 2.2 How to Activate LHT52? ==

137

138

139

(% style="color:red" %)** 1. Open enclosure from below position.**

140

141

[[image:image-20220621093835-1.png]]

142

143

144

(% style="color:red" %)** 2. Insert 2 x AAA LR03 batteries.**

145

146

[[image:image-20220621093835-2.png]]

147

148

149

(% style="color:red" %)** 3. Press the reset button to activate device.**

150

151

[[image:image-20220621093835-3.png]]

152

153

154

User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of LHT52.

== 2.3 Example to join LoRaWAN network ==

159

160

161

This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

162

163

164

(% _mstvisible="1" class="wikigeneratedid" %)

165

[[image:1655775912928-657.png]]

166

167

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the LHT52 device in TTN V3 portal.

168

169

170

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from LHT52.

171

172

Each LHT52 is shipped with a sticker with the default DEV EUI as below:

173

174

175

[[image:image-20220617150003-1.jpeg]]

176

177

178

Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

179

180

Add APP EUI in the application.

181

182

choose to create the device manually.

183

184

Add APP KEY and DEV EUI

185

186

187

[[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]

188

189

[[image:1655776122894-257.png]]

**Default mode OTAA**

194

195

196

[[image:1655776241177-240.png]]

(% style="color:blue" %)**Step 2**(%%): Use ACT button to activate LHT52 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

201

202

[[image:image-20220621095134-4.png]]

== 2.4 Uplink Payload ==

207

208

Uplink payloads include two types: Valid Sensor Value and other status / control command.

209

210

* Valid Sensor Value: Use FPORT=2

211

* Other control command: Use FPORT other than 2.

=== 2.4.1 Uplink FPORT~=5, Device Status ===

217

218

219

Uplink the device configures with FPORT=5. Once LHT52 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.

220

221

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:462px" %)

[[image:image-20220621100550-5.png]]

226

227

Example Payload (FPort=5): [[image:image-20220621105116-11.png]]

228

229

230

(% style="color:#4472c4" %)**Sensor Model**(%%): For LHT52, this value is 0x09.

231

232

(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.

233

234

(% style="color:#4472c4" %)**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

258

259

(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for LHT52.

Ex1: 0x0B3A = 2874mV

Use can also get the Device Status uplink through the downlink command:

265

266

(% style="color:#4472c4" %)**Downlink: 0x2301**

267

268

269

[[image:image-20220621100550-6.png||height="504" width="1491"]]

=== 2.4.2 Uplink FPORT~=2, Real time sensor value ===

274

275

276

LHT52 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].

277

278

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

279

280

(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:426px" %)

281

(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 97px;" %)(% _mstvisible="5" %)

282

(((

283

(% _mstvisible="6" %)

284

(% _msthash="1817478" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**

285

)))|=(% _mstvisible="4" style="width: 39px;" %)(% _mstvisible="5" %)

286

(((

287

(% _mstvisible="6" %)

288

(% _msthash="1817479" _msttexthash="4550" _mstvisible="8" %)**2**

289

)))|=(% _mstvisible="4" style="width: 100px;" %)(% _mstvisible="5" %)

290

(((

291

(% _mstvisible="6" %)

292

(% _msthash="1817480" _msttexthash="4550" _mstvisible="8" %)**2**

293

)))|=(% _mstvisible="4" style="width: 77px;" %)(% _mstvisible="5" %)

294

(((

295

(% _mstvisible="6" %)

296

(% _msthash="1817481" _msttexthash="4550" _mstvisible="8" %)**2**

297

)))|=(% _mstvisible="4" style="width: 47px;" %)(% _mstvisible="5" %)

298

(((

299

(% _mstvisible="6" %)

300

(% _msthash="1817482" _msttexthash="4459" _mstvisible="8" %)**1**

301

)))|=(% _mstvisible="4" style="width: 51px;" %)(% _mstvisible="5" %)

302

(((

303

(% _mstvisible="6" %)

304

(% _msthash="1817483" _msttexthash="4732" _mstvisible="8" %)**4**

305

)))

306

(% _mstvisible="3" %)|(% _mstvisible="4" style="width:97px" %)(% _mstvisible="5" %)

307

(((

308

(% _mstvisible="6" %)

309

(% _msthash="1817484" _msttexthash="60203" _mstvisible="8" %)**Value**

310

)))|(% _mstvisible="4" style="width:39px" %)(% _mstvisible="5" %)

311

(((

312

(% _mstvisible="6" %)

313

[[Temperature>>||anchor="HTemperature26ExternalTemperature:" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]

314

)))|(% _mstvisible="4" style="width:100px" %)(% _mstvisible="5" %)

315

(((

316

(% _mstvisible="6" %)

317

(((

318

(% _mstvisible="7" %)

319

[[Humidity>>||anchor="HHumidity:" _msthash="2224744" _msttexthash="117429" _mstvisible="8"]]

320

321

(% _mstvisible="7" %)

322

323

)))

324

)))|(% _mstvisible="4" style="width:77px" %)(% _mstvisible="5" %)

325

(((

326

(% _mstvisible="6" %)

327

(((

328

(% _mstvisible="7" %)

329

[[External Temperature>>||anchor="HTemperature26ExternalTemperature:" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]

330

)))

331

)))|(% _mstvisible="4" style="width:47px" %)(% _mstvisible="5" %)

332

(((

333

(% _mstvisible="6" %)

334

[[Ext>>||anchor="HExtension23" _msthash="1817486" _msttexthash="32331" _mstvisible="7"]] #

335

)))|(% _mstvisible="4" style="width:51px" %)(((

336

[[Unix TimeStamp>>||anchor="H2.6.1A0UnixTimeStamp" _msthash="1817487" _msttexthash="116545" _mstvisible="7"]]

)))

**Temperature:**

[[image:image-20220621101526-7.png]]

342

343

Example Payload (FPort=2): (% style="background-color:yellow" %)**08 CD 02 20 7F FF 01 61 CD 4E DD**

344

345

346

==== (% style="color:blue" %)**Temperature & External Temperature:**(%%) ====

347

348

349

* Example1: 0x08CD/100=22.53℃

350

* Example2: (0xF5C6-65536)/100=-26.18℃

==== (% style="color:blue" %)**Humidity:**(%%) ====

355

356

357

* Humidity: 0x0220/10=54.4%

==== (% style="color:blue" %)**Extension #**(%%) ====

362

363

364

Bytes for External Sensor:

365

366

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:310px" %)

367

|=(% style="width: 103px;" %)**EXT # Value**|=(% style="width: 203px;" %)**External Sensor Probe**

368

|(% style="width:103px" %)0x01|(% style="width:203px" %)Sensor AS-01, Temperature

=== 2.4.3 Uplink FPORT~=3, Datalog sensor value ===

374

375

376

LHT52 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.

377

378

[[image:image-20220621101659-8.png||height="515" width="1381"]](% style="display:none" %)

379

380

381

* Each data entry is 11 bytes, to save airtime and battery, LHT52 will send max bytes according to the current DR and Frequency bands.(% style="display:none" %)

382

383

For example, in US915 band, the max payload for different DR is:

384

385

1. DR0: max is 11 bytes so one entry of data

386

1. DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

387

1. DR2: total payload includes 11 entries of data

388

1. DR3: total payload includes 22 entries of data.

(% style="color:red" %)**Notice: LHT52 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.**

393

394

See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].

=== 2.4.4 Uplink FPORT~=4, DS18B20 ID ===

399

400

401

User can get external DS18B20 ID through the downlink command.

Downlink: 0x2302

[[image:image-20220621101853-9.png||height="529" width="1366"]]

406

407

Example Payload (FPort=4): (% style="color:#037691" %)**28 86 63 B2 00 00 00 9F**

408

409

The External DS18B20 ID is 0x28 86 63 B2 00 00 00 9F

=== 2.4.5 Decoder in TTN V3 ===

414

415

416

In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.

417

418

In TTN , add formatter as below:

419

420

[[image:image-20220621102026-10.png]]

421

422

(((

423

Please check the decoder from this link: [[https:~~/~~/www.dropbox.com/sh/6ighqpavkd33gqi/AACPu62g~~-~~-x0gBADvHZs_xr6a?dl=0>>https://www.dropbox.com/sh/6ighqpavkd33gqi/AACPu62g--x0gBADvHZs_xr6a?dl=0]]

)))

(((

)))

(% style="display:none" %) (%%)

431

432

(% style="display:none" %) (%%)

433

434

== 2.5 Show data on Datacake ==

(((

Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

)))

(((

)))

(((

(% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

)))

(((

(% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

)))

(((

~1. Add Datacake:

)))

(((

2. Select default key as Access Key:

)))

(((

3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT52:

)))

(((

Please refer to the figure below

)))

[[image:image-20220621112422-1.png]]

471

472

473

Log in to DATACAKE, copy the API under the account

474

475

[[image:image-20220621112422-2.png]]

476

477

478

[[image:image-20220621112422-3.png]]

[[image:image-20220621112422-4.png||height="741" width="1237"]]

483

484

485

[[image:image-20220621112422-5.png||height="314" width="1226"]]

486

487

488

[[image:image-20220621112422-6.png]]

489

490

491

[[image:image-20220621112422-7.png]]

492

493

[[image:image-20220621112422-8.png]]

494

495

496

[[image:image-20220621112422-9.png||height="338" width="1211"]]

497

498

499

[[image:image-20220621112422-10.png||height="372" width="1215"]]

Copy and paste the [[TTN decoder>>https://www.dropbox.com/sh/6ighqpavkd33gqi/AACPu62g--x0gBADvHZs_xr6a?dl=0]] here and save

504

505

[[image:image-20220621112422-11.png||height="575" width="1215"]]

506

507

508

Visual widgets please read the DATACAKE documentation

509

510

[[image:image-20220622154805-1.png]]

== 2.6 Datalog Feature ==

515

516

517

(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)

518

When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.

=== 2.6.1 Unix TimeStamp ===

523

524

525

Unix TimeStamp shows the sampling time of uplink payload. format base on

526

527

[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]

528

529

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :

530

531

For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)

532

533

534

[[image:1655782409139-256.png]]

=== 2.6.2 Poll sensor value ===

(((

User can poll sensor value based on timestamps from the server. Below is the downlink command.

)))

(((

Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.

)))

(((

For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)

)))

(((

Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data

)))

(((

Uplink Internal =5s，means LHT52 will send one packet every 5s. range 5~~255s.

)))

=== 2.6.3 Datalog Uplink payload ===

564

565

566

See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]

567

568

(% style="display:none" %) (%%)

569

570

(% style="display:none" %) (%%)

== 2.7 Alarm Mode ==

(((

When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.

)))

(((

The alarm mode can be modified by AT command or downlink, Alarm mode is disabled by default.

)))

(((

If you need to enable the Alarm mode, please refer to the following

)))

(((

(% style="color:red" %)**Note: Alarm mode will increase the power consumption, we recommend extending the normal uplink time (20 minutes default) when enable this feature.**

)))

(((

)))

(((

(% style="color:blue" %)**AT Commands for Alarm mode:**

)))

(((

(% style="color:#037691" %)**AT+WMOD=1**(%%)**: ** Enable/Disable Alarm Mode. (0:Disable, 1: Enable),need to reset the node to take effect

)))

(((

(% style="color:#037691" %)**AT+CITEMP=1**(%%)**: ** The interval to check temperature for Alarm. (Unit: minute)

)))

(((

(% style="color:#037691" %)**AT+ARTEMP=-40,125**(%%)**: ** Set the normal temperature range from -40°C to 125°C

)))

(((

Suppose you want to set the normal temperature from 15°C to 50°C, and turn on the alarm mode, and check the temperature every 2 minutes. Please refer to the following

613

)))

614

615

[[image:image-20220621114109-14.png]]

616

617

[[image:image-20220621114109-15.png]]

(((

Modification via downlink,Take TTN_V3 as an example((% style="color:red" %)downlink commands, please refer to the downlink command set for details(%%))

)))

(((

In order to ensure that the node is indeed modified by downlink, I reset the node to factory settings first.

626

)))

627

628

[[image:image-20220621114109-16.png]]

629

630

631

[[image:image-20220621114109-17.png||height="583" width="1274"]]

632

633

[[image:image-20220621114109-18.png]]

634

635

636

Or use a downlink directly: AA010002000F0032 ([[See command info>>||anchor="H3.1A0DownlinkCommandSet"]])

637

638

[[image:image-20220621114109-19.png||height="178" width="1292"]]

== 2.8 LED Indicator ==

(((

The LHT52 has a triple color LED which for easy showing different stage.

)))

(((

(% style="color:#037691" %)**In a normal working state**:

652

)))

653

654

* When the node is restarted, (% style="color:green" %)GREEN, (% style="color:red" %)RED(%%) and (% style="color:blue" %)BLUE(%%) are sequentially lit.

655

656

* During OTAA Join:

657

** **For each Join Request uplink:** the (% style="color:green" %)GREEN LED (%%)will blink once.

658

** **Once Join Successful:** the (% style="color:green" %)GREEN LED(%%) will be solid on for 5 seconds.

659

660

* After joined, for each uplink, the (% style="color:blue" %)BLUE LED(%%) or (% style="color:green" %)GREEN LED (%%)will blink once.

661

** (% style="color:blue" %)BLUE LED(%%) when external sensor is connected

662

** (% style="color:green" %)GREEN LED(%%) when external sensor is not connected

663

664

* For each success downlink, the (% style="color:purple" %)PURPLE LED(%%) will blink once

665

666

(((

667

(% style="color:#037691" %)**In AT Command Mode:**

)))

(((

If user use console cable to send AT Command to LHT52, the (% style="color:red" %)**RED LED**(%%) will always on until:

)))

* Power off/on LHT52

* Press reset button of LHT52.

676

* Send an AT Command: AT+CLPM=1

677

678

(% style="display:none" %) (%%)

== 2.9 Button ==

Press the button LHT52 will reset and join network again.

= 3. Configure LHT52 via AT command or LoRaWAN downlink =

690

691

692

Use can configure LHT52 via AT Command or LoRaWAN Downlink.

693

694

* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].

695

696

* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]

697

698

There are two kinds of commands to configure LHT52, they are:

699

700

* (% style="color:#4f81bd" %)**General Commands:**

701

702

These commands are to configure:

703

704

* General system settings like: uplink interval.

705

706

* LoRaWAN protocol & radio-related commands.

707

708

They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

709

710

711

* (% style="color:#4f81bd" %)**Commands special design for LHT52**

712

713

These commands are only valid for LHT52, as below:

== 3.1 Downlink Command Set ==

718

719

720

(% border="1" cellpadding="0" cellspacing="10" style="background-color:#ffffcc; color:green; width:500px" %)

721

|=(% style="width: 100px;" %)**Command Example**|=(% style="width: 150px;" %)**Function**|=(% style="width: 100px;" %)**Response**|=(% style="width: 150px;" %)**Downlink**

722

|(% style="width:161px" %)AT+TDC=?|(% style="width:138px" %)View current TDC time|(% style="width:243px" %)(((

1200000

OK

)))|(% style="width:1001px" %)Default 1200000(ms)

728

|(% style="width:161px" %)AT+TDC=300000|(% style="width:138px" %)Set TDC time|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X0100012C:

01:fixed command

00012C:0X00012C=300(seconds)

734

)))

735

|(% style="width:161px" %)ATZ|(% style="width:138px" %)Reset node|(% style="width:243px" %) |(% style="width:1001px" %)0x04FF

736

|(% style="width:161px" %)AT+FDR|(% style="width:138px" %)Restore factory settings|(% style="width:243px" %) |(% style="width:1001px" %)0X04FE

737

|(% style="width:161px" %)AT+CFM=?|(% style="width:138px" %)View the current confirmation mode status|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

742

|(% style="width:161px" %)AT+CFM=1|(% style="width:138px" %)Turn on confirmation mode|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x0500:close

0x0501:open

05:fixed command

)))

|(% style="width:161px" %)AT+CHE=?|(% style="width:138px" %)View the current sub-band select 0-7, the default is 0|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

754

|(% style="width:161px" %)AT+CHE=2|(% style="width:138px" %)(((

Set subband to 2

(CN470,US915,AU915)

)))|(% style="width:243px" %)(((

759

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0X0702:

07:fixed command

02:Select subband 2

)))

|(% style="width:161px" %)AT+WMOD=?|(% style="width:138px" %)View the current alarm mode status|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

776

|(% style="width:161px" %)AT+WMOD=1|(% style="width:138px" %)Turn on alarm mode|(% style="width:243px" %)(((

777

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0xA501:open

0XA500:close

A5:fixed command

)))

|(% style="width:161px" %)AT+CITEMP=?|(% style="width:138px" %)View the current temperature detection time interval|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1(min)

796

|(% style="width:161px" %)AT+CITEMP=2|(% style="width:138px" %)Set the temperature detection time interval to 2min|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0XA70002

A7:fixed command

0002:0X0002=2(min)

)))

|(% style="width:161px" %)AT+NJM=?|(% style="width:138px" %)Check the current network connection method|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1

808

|(% style="width:161px" %)AT+NJM=0|(% style="width:138px" %)Change the network connection method to ABP|(% style="width:243px" %)(((

809

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0X2000:ABP

0x2001:OTAA

20:fixed command

)))

|(% style="width:161px" %)AT+RPL=?|(% style="width:138px" %)View current RPL settings|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

828

|(% style="width:161px" %)AT+RPL=1|(% style="width:138px" %)set RPL=1|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2101:

21:fixed command

01:for details, check wiki

834

)))

835

|(% style="width:161px" %)AT+ADR=?|(% style="width:138px" %)View current ADR status|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 0

840

|(% style="width:161px" %)AT+ADR=0|(% style="width:138px" %)Set the ADR state to off|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2200:close

0x2201:open

22:fixed command

)))

|(% style="width:161px" %)AT+DR=?|(% style="width:138px" %)View the current DR settings|(% style="width:243px" %)OK|(% style="width:1001px" %)

848

|(% style="width:161px" %)AT+DR=1|(% style="width:138px" %)(((

849

set DR to 1

850

851

It takes effect only when ADR=0

852

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00:ADR=0

01:DR=1

01:TXP=1

22:fixed command

)))

|(% style="width:161px" %)AT+TXP=?|(% style="width:138px" %)View the current TXP|(% style="width:243px" %)OK|(% style="width:1001px" %)

864

|(% style="width:161px" %)AT+TXP=1|(% style="width:138px" %)(((

865

set TXP to 1

866

867

It takes effect only when ADR=0

868

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00:ADR=0

01:DR=1

01:TXP=1

22:fixed command

)))

|(% style="width:161px" %) |(% style="width:138px" %)Upload node configuration or DS18B20 ID|(% style="width:243px" %) |(% style="width:1001px" %)(((

880

0X2301:Upload node configuration

881

882

0x2302:Upload DS18B20 ID

23:fixed command

)))

|(% style="width:161px" %)AT+DWELL=?|(% style="width:138px" %)Check the high-rate upload settings|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1

891

|(% style="width:161px" %)AT+DWELL=1|(% style="width:138px" %)(((

Set high rate upload

(AS923,AU915)

)))|(% style="width:243px" %)(((

896

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0x2501:close

0x2500:open

25:fixed command

for details, check wiki

909

)))

910

|(% style="width:161px" %)AT+RJTDC=?|(% style="width:138px" %)View current RJTDC set time|(% style="width:243px" %)(((

20

OK

)))|(% style="width:1001px" %)Default 20(min)

915

|(% style="width:161px" %)AT+RJTDC=10|(% style="width:138px" %)Set RJTDC time interval|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X26000A:

26:fixed command

000A:0X000A=10(min)

for details, check wiki

923

)))

924

|(% style="width:161px" %) |(% style="width:138px" %)Retrieve stored data for a specified period of time|(% style="width:243px" %) |(% style="width:1001px" %)(((

925

0X3161DE7C7061DE8A800A:

31:fixed command

61DE7C70:0X61DE7C70=2022/1/12 15:00:00

930

931

61DE8A80:0X61DE8A80=2022/1/12 16:00:00

0A:0X0A=10(second)

View details 2.6.2

)))

|(% style="width:161px" %)AT+DDETECT=?|(% style="width:138px" %)View the current DDETECT setting status and time|(% style="width:243px" %)(((

0,1440

OK

)))|(% style="width:1001px" %)Default 0,1440(min)

942

|(% style="width:161px" %)AT+DDETECT=1,1440|(% style="width:138px" %)(((

943

Set DDETECT setting status and time

944

945

((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))

946

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X320005A0:close

0X320105A0:open

32:fixed command

05A0:0X05A0=1440(min)

954

)))

955

|(% style="width:161px" %) |(% style="width:138px" %)(((

956

Downlink Modification Alarm Mode

957

958

(AT+WMOD,AT+CITEMP,AT+ARTEMP)

959

)))|(% style="width:243px" %) |(% style="width:1001px" %)(((

0XAA010002000F00032:

AA:fixed command

01:0X01=1(AT+MOD)

0002:0X0002=2(AT+CITEMP)

967

968

000F:0X000F=15(AT+ARTEMP)

969

970

0032:0X0032=50(AT+ARTEMP)

)))

== 3.2 Set Password ==

977

978

979

Feature: Set device password, max 9 digits.

980

981

(% style="color:#4f81bd" %)**AT Command: AT+PWORD**

982

983

[[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]

984

985

986

(% style="color:#4f81bd" %)**Downlink Command:**

987

988

No downlink command for this feature.

= 4. Battery & How to replace =

993

994

995

== 4.1 Battery Type and replace ==

996

997

998

LHT52 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). User can buy generic AAA battery and replace it.

999

1000

1001

(% style="color:red" %)**Note: **

1002

1003

1. The LHT52 doesn't have any screw, use can use nail to open it by the middle.

1004

1005

[[image:image-20220621143535-5.png]]

1006

1007

1008

2. Make sure the direction is correct when install the AAA batteries.

1009

1010

[[image:image-20220621143535-6.png]]

== 4.2 Power Consumption Analyze ==

1015

1016

1017

Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

1018

1019

Instruction to use as below:

1020

1021

(% style="color:blue" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

1022

1023

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

1024

1025

1026

(% style="color:blue" %)**Step 2**(%%): (% style="display:none" %) (%%)Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

1033

1034

[[image:image-20220621143643-7.png||height="429" width="1326"]]

= 5. Sensors and Accessories =

1039

1040

1041

== 5.1 Temperature Probe (AS-01) ==

1042

1043

1044

External Temperature Probe base on DS18B20. (note: Default Package doesn't include AS-01)

1045

1046

[[image:image-20220621141939-4.png||height="315" width="279"]] [[image:image-20220621141546-2.png||height="308" width="205"]](% style="display:none" %)

1047

1048

1049

**External Temperature Probe (AS-01):(% style="display:none" %) (%%)**

1050

1051

* Resolution: 0.0625 °C

1052

* ±0.5°C accuracy from -10°C to +85°C

1053

* ±2°C accuracy from -55°C to +125°C

1054

* Operating Range: -55 °C ~~ 125 °C

1055

* Cable Length: 2 meters

== 5.2 Program Converter (AS-02) ==

1061

1062

1063

AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:

1064

1065

1. Access AT console of LHT52 when used with USB-TTL adapter. [[See this link>>||anchor="H6.1HowtouseATCommandtoconfigureLHT52"]].

1066

1. Update firmware to LHT52 when used with DAP-Link adapter. [[See this link>>doc:Main.Firmware Upgrade Instruction.WebHome||anchor="H2.3LHT52"]].

1067

1068

[[image:image-20220621141724-3.png]]

= 6. FAQ =

== 6.1 How to use AT Command to configure LHT52 ==

1076

1077

1078

LHT52 supports AT Command set. User can use a USB to TTL adapter plus the Program Cable to connect to LHT52 for using AT command, as below.

1079

1080

1081

[[image:image-20220621144150-8.png||height="537" width="724"]]

**Connection:**

* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin

1087

* (% style="background-color:yellow" %)USB to TTL RXD <~-~-> Program Converter D+ pin

1088

* (% style="background-color:yellow" %)USB to TTL TXD <~-~-> Program Converter A11 pin

1089

1090

1091

It is also possible to connect using DAPLink

1092

1093

[[image:image-20220621144235-9.png||height="485" width="729"]]

(((

**Connection:**

)))

* (((

(% style="background-color:yellow" %)USB to DAP-LINK GND <~-~-> Program Converter GND pin

1101

)))

1102

* (((

1103

(% style="background-color:yellow" %)USB to DAP-LINK RXD <~-~-> Program Converter D+ pin

1104

)))

1105

* (((

1106

(% style="background-color:yellow" %)USB to DAP-LINK TXD <~-~-> Program Converter A11 pin

)))

(((

In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**115200**(%%) to access to access serial console for LHT52. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.

)))

(((

Input password and ATZ to activate LHT52,As shown below:

)))

[[image:image-20220621144235-10.png]]

== 6.2 AT Command and Downlink ==

(((

Sending ATZ will reboot the node

)))

(((

Sending AT+FDR will restore the node to factory settings

)))

(((

Get the node's AT command setting by sending AT+CFG

)))

(((

)))

(((

**Example：**

)))

(((

AT+VER=EU868 v1.0

)))

(((

AT+NJM=1

)))

(((

AT+DEUI=25 32 12 45 65 26 12 35

)))

(((

AT+APPEUI=25 32 12 45 65 26 32 16

)))

(((

AT+APPKEY=25 32 12 45 65 26 32 16 89 48 85 65 45 87 89 55

)))

(((

AT+DADDR=00 00 00 00

)))

(((

AT+APPSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

)))

(((

AT+NWKSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

)))

(((

AT+NWKID=00 00 00 13

)))

(((

AT+ADR=1

)))

(((

AT+DR=5

)))

(((

AT+TXP=1

)))

(((

AT+CHS=0

)))

(((

AT+CLASS=A

)))

(((

AT+CFM=0

)))

(((

AT+JN1DL=5000

)))

(((

AT+JN2DL=6000

)))

(((

AT+RX1DL=5000

)))

(((

AT+RX2DL=6000

)))

(((

AT+RX1WTO=24

)))

(((

AT+RX2WTO=6

)))

(((

AT+RX2FQ=869525000

)))

(((

AT+RX2DR=0

)))

(((

AT+RPL=0

)))

(((

AT+FCU=6

)))

(((

AT+FCD=0

)))

(((

AT+CFS=0

)))

(((

AT+NJS=1

)))

(((

AT+DCS=0

)))

(((

AT+PNM=1

)))

(((

AT+PWORD=123456

)))

(((

AT+EXT=1

)))

(((

AT+TDC=120000

)))

(((

AT+TIMESTAMP=1640851037 2021 12 30 7 57 17

)))

(((

AT+RJTDC=20

)))

(((

AT+DDETECT=0,1440

)))

(((

AT+WMOD=0

)))

(((

AT+CITEMP=1

)))

(((

AT+ARTEMP=-40,125

)))

(((

Send AT+PDTA=? to get the stored 174 data

)))

(((

**Example：**

)))

[[image:image-20220621144804-11.png]]

== 6.3 How to upgrade the firmware? ==

1317

1318

1319

LHT52 requires a program converter to upload images to LHT52, which is used to upload image to LHT52 for:

1320

1321

* Support new features

1322

* For bug fix

1323

* Change LoRaWAN bands.

1324

1325

(((

1326

User can check this link for the detail of operation of firmware upgrade: [[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction.WebHome||anchor="H2.3LHT52"]]

)))

== 6.4 How to change the LoRa Frequency Bands/Region? ==

1332

1333

1334

User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.

= 7. Order Info =

== 7.1 Main Device ==

(((

Part Number: (% style="color:#4472c4" %)**LHT65N-XX**

)))

(((

(% style="color:#4472c4" %)**XX **(%%): The default frequency band

1350

)))

1351

1352

* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band

1353

* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band

1354

* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band

1355

* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band

1356

* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band

1357

* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band

1358

* (% style="color:red" %)**IN865**(%%)**: **LoRaWAN IN865 band

1359

* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band

== 7.2 Accessories ==

1365

1366

1367

(% style="color:red" %)**Note: below accessories are not include in the main device package, need to order separately.**

1368

1369

**Temperature Probe: (% style="color:red" %)AS-01(%%)**

1370

1371

**Program Converter: (% style="color:red" %)AS-02(%%)**

= 8. Packing Info =

**Package Includes**:

1379

1380

* LHT52 Temperature & Humidity Sensor x 1

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1388

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].

= 10. Reference material =

1394

1395

1396

* [[Datasheet, photos, decoder, firmware>>https://www.dropbox.com/sh/ucgxio6zltajlxg/AACxr_XyH4Cy7gevG293k4zqa?dl=0]]

1397

1398