LHT52 - LoRaWAN Temperature & Humidity Sensor User Manual

The Dragino LHT52 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:blue" %)**built-in Temperature & Humidity sensor** (%%)and has a USB Type-C sensor connector to connect to external sensors such as external Temperature Sensor.

27

)))

28

29

(((

30

LHT52 (% style="color:blue" %)**senses environment temperature and humidity**(%%) and send these values via long-range wireless LoRaWAN protocol. It targets professional wireless sensor network applications such as food service, smart metering, smart cities, building automation, and so on.

)))

(((

LHT52 supports(% style="color:blue" %)** 2 x AAA batteries **(%%)and works for a long time up to several years. Use can replace the batteries easily after they are finished.

)))

(((

LHT52 is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

)))

(((

LHT52 supports(% style="color:blue" %)** Datalog feature** (%%)to make sure users won’t miss sensor data. It records sensor value for every uplink. These values can be retrieved by LoRaWAN server via downlink command.

)))

(((

LHT52 supports(% style="color:blue" %)** temperature alarm feature**(%%). It can uplink alarm in a short interval while temperature exceeds preset limits.

)))

(((

*Battery life depends how often to send data, please see [[battery analyzer>>||anchor="H4.2A0PowerConsumptionAnalyze"]].

51

)))

52

53

[[image:1655774519494-861.png]]

== 1.2 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

60

* Built-in Temperature & Humidity sensor

61

* Optional External Probe

62

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

63

* AT Commands to change parameters

64

* Remote configure parameters via LoRaWAN Downlink

65

* Firmware upgradable via program port

66

* Support 2 x AAA LR03 batteries.

* Datalog feature

* IP Rating: IP52

== 1.3 Specification ==

72

73

74

**Built-in Temperature Sensor:**

75

76

* Resolution: 0.01 °C

77

* Accuracy Tolerance: Typ ±0.3 °C

78

* Long Term Drift: < 0.02 °C/yr

79

* Operating Range: -20 ~~ 50 °C

80

81

**Built-in Humidity Sensor:**

82

83

* Resolution: 0.1 %RH

84

* Accuracy Tolerance: Typ ±3 %RH

85

* Long Term Drift: < 0.02 °C/yr

86

* Operating Range: 0 ~~ 99.0 %RH(no Dew)

87

88

89

== 1.4 Power Consumption ==

90

91

LHT52 (without external sensor): Idle: 5uA, Transmit: max 110mA

92

93

LHT52 + External Temperature Probe (AS-01): Idle: 6uA, Transmit: max 110mA.

== 1.5 Storage & Operation Temperature ==

-20°C to +50°C

== 1.6 Applications ==

104

105

* Smart Buildings & Home Automation

106

* Logistics and Supply Chain Management

* Smart Metering

* Smart Agriculture

* Smart Cities

* Smart Factory

= 2. Operation Mode =

113

114

== 2.1 How it work? ==

115

116

Each LHT52 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use LHT52 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if LHT52 is under this LoRaWAN network coverage, LHT52 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.

117

118

119

== 2.2 How to Activate LHT52? ==

120

121

(% style="color:red" %)** 1. Open enclosure from below position.**

122

123

[[image:image-20220621093835-1.png]]

124

125

126

(% style="color:red" %)** 2. Insert 2 x AAA LR03 batteries.**

127

128

[[image:image-20220621093835-2.png]]

129

130

131

(% style="color:red" %)** 3. Press the reset button to activate device.**

132

133

[[image:image-20220621093835-3.png]]

134

135

136

User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of LHT52.

== 2.3 Example to join LoRaWAN network ==

141

142

This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

143

144

(% _mstvisible="1" class="wikigeneratedid" %)

145

[[image:1655775912928-657.png]]

146

147

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the LHT52 device in TTN V3 portal.

148

149

150

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from LHT52.

151

152

Each LHT52 is shipped with a sticker with the default DEV EUI as below:

153

154

155

[[image:image-20220617150003-1.jpeg]]

156

157

158

Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

159

160

Add APP EUI in the application.

161

162

choose to create the device manually.

163

164

Add APP KEY and DEV EUI

165

166

167

[[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]

168

169

[[image:1655776122894-257.png]]

**Default mode OTAA**

174

175

176

[[image:1655776241177-240.png]]

(% style="color:blue" %)**Step 2**(%%): Use ACT button to activate LHT52 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

181

182

[[image:image-20220621095134-4.png]]

== 2.4 Uplink Payload ==

187

188

Uplink payloads include two types: Valid Sensor Value and other status / control command.

189

190

* Valid Sensor Value: Use FPORT=2

191

* Other control command: Use FPORT other than 2.

192

193

=== 2.4.1 Uplink FPORT~=5, Device Status ===

194

195

Uplink the device configures with FPORT=5. Once LHT52 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.

196

197

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:462px" %)

[[image:image-20220621100550-5.png]]

202

203

Example Payload (FPort=5): [[image:image-20220621105116-11.png]]

204

205

206

(% style="color:#4472c4" %)**Sensor Model**(%%): For LHT52, this value is 0x09.

207

208

(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.

209

210

(% style="color:#4472c4" %)**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

234

235

(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for LHT52.

Ex1: 0x0B3A = 2874mV

Use can also get the Device Status uplink through the downlink command:

241

242

(% style="color:#4472c4" %)**Downlink: 0x2301**

243

244

245

[[image:image-20220621100550-6.png||height="504" width="1491"]]

=== 2.4.2 Uplink FPORT~=2, Real time sensor value ===

250

251

LHT52 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].

252

253

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

254

255

(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:426px" %)

256

(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 97px;" %)(% _mstvisible="5" %)

257

(((

258

(% _mstvisible="6" %)

259

(% _msthash="1817478" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**

260

)))|=(% _mstvisible="4" style="width: 39px;" %)(% _mstvisible="5" %)

261

(((

262

(% _mstvisible="6" %)

263

(% _msthash="1817479" _msttexthash="4550" _mstvisible="8" %)**2**

264

)))|=(% _mstvisible="4" style="width: 100px;" %)(% _mstvisible="5" %)

265

(((

266

(% _mstvisible="6" %)

267

(% _msthash="1817480" _msttexthash="4550" _mstvisible="8" %)**2**

268

)))|=(% _mstvisible="4" style="width: 77px;" %)(% _mstvisible="5" %)

269

(((

270

(% _mstvisible="6" %)

271

(% _msthash="1817481" _msttexthash="4550" _mstvisible="8" %)**2**

272

)))|=(% _mstvisible="4" style="width: 47px;" %)(% _mstvisible="5" %)

273

(((

274

(% _mstvisible="6" %)

275

(% _msthash="1817482" _msttexthash="4459" _mstvisible="8" %)**1**

276

)))|=(% _mstvisible="4" style="width: 51px;" %)(% _mstvisible="5" %)

277

(((

278

(% _mstvisible="6" %)

279

(% _msthash="1817483" _msttexthash="4732" _mstvisible="8" %)**4**

280

)))

281

(% _mstvisible="3" %)|(% _mstvisible="4" style="width:97px" %)(% _mstvisible="5" %)

282

(((

283

(% _mstvisible="6" %)

284

(% _msthash="1817484" _msttexthash="60203" _mstvisible="8" %)**Value**

285

)))|(% _mstvisible="4" style="width:39px" %)(% _mstvisible="5" %)

286

(((

287

(% _mstvisible="6" %)

288

[[Temperature>>||anchor="HTemperature26ExternalTemperature:" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]

289

)))|(% _mstvisible="4" style="width:100px" %)(% _mstvisible="5" %)

290

(((

291

(% _mstvisible="6" %)

292

(((

293

(% _mstvisible="7" %)

294

[[Humidity>>||anchor="HHumidity:" _msthash="2224744" _msttexthash="117429" _mstvisible="8"]]

295

296

(% _mstvisible="7" %)

297

298

)))

299

)))|(% _mstvisible="4" style="width:77px" %)(% _mstvisible="5" %)

300

(((

301

(% _mstvisible="6" %)

302

(((

303

(% _mstvisible="7" %)

304

[[External Temperature>>||anchor="HTemperature26ExternalTemperature:" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]

305

)))

306

)))|(% _mstvisible="4" style="width:47px" %)(% _mstvisible="5" %)

307

(((

308

(% _mstvisible="6" %)

309

[[Ext>>||anchor="HExtension23" _msthash="1817486" _msttexthash="32331" _mstvisible="7"]] #

310

)))|(% _mstvisible="4" style="width:51px" %)(((

311

[[Unix TimeStamp>>||anchor="H2.6.1A0UnixTimeStamp" _msthash="1817487" _msttexthash="116545" _mstvisible="7"]]

)))

**Temperature:**

[[image:image-20220621101526-7.png]]

317

318

Example Payload (FPort=2): (% style="background-color:yellow" %)**08 CD 02 20 7F FF 01 61 CD 4E DD**

319

320

321

==== **Temperature & External Temperature:** ====

322

323

* Example1: 0x08CD/100=22.53℃

324

* Example2: (0xF5C6-65536)/100=-26.18℃

325

326

==== **Humidity:** ====

327

328

* Humidity: 0x0220/10=54.4%

329

330

==== **Extension #** ====

331

332

Bytes for External Sensor:

333

334

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:310px" %)

335

|=(% style="width: 103px;" %)**EXT # Value**|=(% style="width: 203px;" %)**External Sensor Probe**

336

|(% style="width:103px" %)0x01|(% style="width:203px" %)Sensor AS-01, Temperature

337

338

=== 2.4.3 Uplink FPORT~=3, Datalog sensor value ===

339

340

LHT52 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.

341

342

[[image:image-20220621101659-8.png]]

343

344

345

* Each data entry is 11 bytes, to save airtime and battery, LHT52 will send max bytes according to the current DR and Frequency bands.

346

347

For example, in US915 band, the max payload for different DR is:

348

349

1. DR0: max is 11 bytes so one entry of data

350

1. DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

351

1. DR2: total payload includes 11 entries of data

352

1. DR3: total payload includes 22 entries of data.

353

354

(% style="color:red" %)**Notice**: LHT52 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.

355

356

See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].

=== 2.4.4 Uplink FPORT~=4, DS18B20 ID ===

362

363

User can get external DS18B20 ID through the downlink command.

Downlink:0x2302

[[image:image-20220621101853-9.png]]

368

369

Example Payload (FPort=4): (% style="color:#037691" %)**28 86 63 B2 00 00 00 9F**

370

371

The External DS18B20 ID is 0x28 86 63 B2 00 00 00 9F

=== 2.4.5 Decoder in TTN V3 ===

376

377

In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.

378

379

In TTN , add formatter as below:

380

381

[[image:image-20220621102026-10.png]]

382

383

(((

384

Please check the decoder from this link:

385

386

(((

387

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LHT52/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LHT52/Decoder/]]

== 2.5 Show data on Datacake ==

393

394

(((

395

Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

)))

(((

)))

(((

(% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

)))

(((

(% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

)))

(((

~1. Add Datacake:

)))

(((

2. Select default key as Access Key:

)))

(((

3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT52:

)))

(((

Please refer to the figure below

)))

[[image:image-20220621112422-1.png]]

Log in to DATACAKE, copy the API under the account

432

433

[[image:image-20220621112422-2.png]]

434

435

436

[[image:image-20220621112422-3.png]]

[[image:image-20220621112422-4.png]]

441

442

443

[[image:image-20220621112422-5.png]]

444

445

446

[[image:image-20220621112422-6.png]]

447

448

449

[[image:image-20220621112422-7.png]]

450

451

[[image:image-20220621112422-8.png]]

452

453

454

[[image:image-20220621112422-9.png]]

455

456

457

[[image:image-20220621112422-10.png||height="372" width="1215"]]

458

459

460

Copy and paste the [[TTN decoder>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LHT52/Decoder/]] here and save

461

462

[[image:image-20220621112422-11.png||height="575" width="1215"]]

463

464

465

Visual widgets please read the DATACAKE documentation

466

467

[[image:image-20220621112422-12.png||height="713" width="1180"]]

== 2.6 Datalog Feature ==

474

475

(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)

476

When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.

=== 2.6.1 Unix TimeStamp ===

481

482

Unix TimeStamp shows the sampling time of uplink payload. format base on

483

484

[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]

485

486

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :

487

488

For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)

489

490

491

[[image:1655782409139-256.png]]

=== 2.6.2 Poll sensor value ===

497

498

(((

499

User can poll sensor value based on timestamps from the server. Below is the downlink command.

)))

(((

Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.

)))

(((

For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)

)))

(((

Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data

)))

(((

Uplink Internal =5s，means LHT52 will send one packet every 5s. range 5~~255s.

)))

=== 2.6.3 Datalog Uplink payload ===

522

523

See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]

== 2.7 Alarm Mode ==

(((

When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.

)))

(((

The alarm mode can be modified by AT command or downlink, Alarm mode is disabled by default.

)))

(((

If you need to enable the Alarm mode, please refer to the following

)))

(((

(% style="color:red" %)**Note: Alarm mode will increase the power consumption, we recommend extending the normal uplink time (20 minutes default) when enable this feature.**

)))

(((

)))

(((

(% style="color:blue" %)**AT Commands for Alarm mode:**

)))

(((

(% style="color:#037691" %)**AT+WMOD=1**(%%)**: ** Enable/Disable Alarm Mode. (0:Disable, 1: Enable),need to reset the node to take effect

)))

(((

(% style="color:#037691" %)**AT+CITEMP=1**(%%)**: ** The interval to check temperature for Alarm. (Unit: minute)

)))

(((

(% style="color:#037691" %)**AT+ARTEMP=-40,125**(%%)**: ** Set the normal temperature range from -40°C to 125°C

)))

(((

Suppose you want to set the normal temperature from 15°C to 50°C, and turn on the alarm mode, and check the temperature every 2 minutes. Please refer to the following

568

)))

569

570

[[image:image-20220621114109-14.png]]

571

572

[[image:image-20220621114109-15.png]]

(((

Modification via downlink,Take TTN_V3 as an example((% style="color:red" %)downlink commands, please refer to the downlink command set for details(%%))

)))

(((

In order to ensure that the node is indeed modified by downlink, I reset the node to factory settings first.

581

)))

582

583

[[image:image-20220621114109-16.png]]

584

585

586

[[image:image-20220621114109-17.png||height="583" width="1274"]]

587

588

[[image:image-20220621114109-18.png]]

589

590

591

Or use a downlink directly: AA010002000F0032 ([[See command info>>||anchor="H3.1A0DownlinkCommandSet"]])

592

593

[[image:image-20220621114109-19.png||height="178" width="1292"]]

== 2.8 LED Indicator ==

598

599

(((

600

The LHT52 has a triple color LED which for easy showing different stage.

)))

(((

(% style="color:#037691" %)**In a normal working state**:

605

)))

606

607

* When the node is restarted, (% style="color:green" %)**GREEN**, (% style="color:red" %)**RED**(%%) and (% style="color:blue" %)**BLUE**(%%) are sequentially lit.

608

609

* During OTAA Join:

610

** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.

611

** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.

612

613

* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.

614

** (% style="color:blue" %)**BLUE LED**(%%) when external sensor is connected

615

** (% style="color:green" %)**GREEN LED**(%%) when external sensor is not connected

616

617

* For each success downlink, the (% style="color:purple" %)**PURPLE LED**(%%) will blink once

618

619

(((

620

(% style="color:#037691" %)**In AT Command Mode:**

)))

(((

If user use console cable to send AT Command to LHT52, the (% style="color:red" %)**RED LED**(%%) will always on until:

)))

* Power off/on LHT52

* Press reset button of LHT52.

629

* Send an AT Command: AT+CLPM=1

== 2.9 Button ==

Press the button LHT52 will reset and join network again.

= 3. Configure LHT52 via AT command or LoRaWAN downlink =

640

641

Use can configure LHT52 via AT Command or LoRaWAN Downlink.

642

643

* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].

644

645

* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]

646

647

There are two kinds of commands to configure LHT52, they are:

648

649

* (% style="color:#4f81bd" %)**General Commands:**

650

651

These commands are to configure:

652

653

* General system settings like: uplink interval.

654

655

* LoRaWAN protocol & radio-related commands.

656

657

They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

658

659

660

* (% style="color:#4f81bd" %)**Commands special design for LHT52**

661

662

These commands are only valid for LHT52, as below:

663

664

665

== 3.1 Downlink Command Set ==

666

667

668

(% border="1" cellpadding="0" cellspacing="10" style="background-color:#ffffcc; color:green; width:500px" %)

669

|=(% style="width: 100px;" %)**Command Example**|=(% style="width: 150px;" %)**Function**|=(% style="width: 100px;" %)**Response**|=(% style="width: 150px;" %)**Downlink**

670

|(% style="width:161px" %)AT+TDC=?|(% style="width:138px" %)View current TDC time|(% style="width:243px" %)(((

1200000

OK

)))|(% style="width:1001px" %)Default 1200000(ms)

676

|(% style="width:161px" %)AT+TDC=300000|(% style="width:138px" %)Set TDC time|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X0100012C:

01:fixed command

00012C:0X00012C=300(seconds)

682

)))

683

|(% style="width:161px" %)ATZ|(% style="width:138px" %)Reset node|(% style="width:243px" %) |(% style="width:1001px" %)0x04FF

684

|(% style="width:161px" %)AT+FDR|(% style="width:138px" %)Restore factory settings|(% style="width:243px" %) |(% style="width:1001px" %)0X04FE

685

|(% style="width:161px" %)AT+CFM=?|(% style="width:138px" %)View the current confirmation mode status|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

690

|(% style="width:161px" %)AT+CFM=1|(% style="width:138px" %)Turn on confirmation mode|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x0500:close

0x0501:open

05:fixed command

)))

|(% style="width:161px" %)AT+CHE=?|(% style="width:138px" %)View the current sub-band select 0-7, the default is 0|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

702

|(% style="width:161px" %)AT+CHE=2|(% style="width:138px" %)(((

Set subband to 2

(CN470,US915,AU915)

)))|(% style="width:243px" %)(((

707

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0X0702:

07:fixed command

02:Select subband 2

)))

|(% style="width:161px" %)AT+WMOD=?|(% style="width:138px" %)View the current alarm mode status|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

724

|(% style="width:161px" %)AT+WMOD=1|(% style="width:138px" %)Turn on alarm mode|(% style="width:243px" %)(((

725

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0xA501:open

0XA500:close

A5:fixed command

)))

|(% style="width:161px" %)AT+CITEMP=?|(% style="width:138px" %)View the current temperature detection time interval|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1(min)

744

|(% style="width:161px" %)AT+CITEMP=2|(% style="width:138px" %)Set the temperature detection time interval to 2min|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0XA70002

A7:fixed command

0002:0X0002=2(min)

)))

|(% style="width:161px" %)AT+NJM=?|(% style="width:138px" %)Check the current network connection method|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1

756

|(% style="width:161px" %)AT+NJM=0|(% style="width:138px" %)Change the network connection method to ABP|(% style="width:243px" %)(((

757

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0X2000:ABP

0x2001:OTAA

20:fixed command

)))

|(% style="width:161px" %)AT+RPL=?|(% style="width:138px" %)View current RPL settings|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

776

|(% style="width:161px" %)AT+RPL=1|(% style="width:138px" %)set RPL=1|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2101:

21:fixed command

01:for details, check wiki

782

)))

783

|(% style="width:161px" %)AT+ADR=?|(% style="width:138px" %)View current ADR status|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 0

788

|(% style="width:161px" %)AT+ADR=0|(% style="width:138px" %)Set the ADR state to off|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2200:close

0x2201:open

22:fixed command

)))

|(% style="width:161px" %)AT+DR=?|(% style="width:138px" %)View the current DR settings|(% style="width:243px" %)OK|(% style="width:1001px" %)

796

|(% style="width:161px" %)AT+DR=1|(% style="width:138px" %)(((

797

set DR to 1

798

799

It takes effect only when ADR=0

800

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00:ADR=0

01:DR=1

01:TXP=1

22:fixed command

)))

|(% style="width:161px" %)AT+TXP=?|(% style="width:138px" %)View the current TXP|(% style="width:243px" %)OK|(% style="width:1001px" %)

812

|(% style="width:161px" %)AT+TXP=1|(% style="width:138px" %)(((

813

set TXP to 1

814

815

It takes effect only when ADR=0

816

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00:ADR=0

01:DR=1

01:TXP=1

22:fixed command

)))

|(% style="width:161px" %) |(% style="width:138px" %)Upload node configuration or DS18B20 ID|(% style="width:243px" %) |(% style="width:1001px" %)(((

828

0X2301:Upload node configuration

829

830

0x2302:Upload DS18B20 ID

23:fixed command

)))

|(% style="width:161px" %)AT+DWELL=?|(% style="width:138px" %)Check the high-rate upload settings|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1

839

|(% style="width:161px" %)AT+DWELL=1|(% style="width:138px" %)(((

Set high rate upload

(AS923,AU915)

)))|(% style="width:243px" %)(((

844

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0x2501:close

0x2500:open

25:fixed command

for details, check wiki

857

)))

858

|(% style="width:161px" %)AT+RJTDC=?|(% style="width:138px" %)View current RJTDC set time|(% style="width:243px" %)(((

20

OK

)))|(% style="width:1001px" %)Default 20(min)

863

|(% style="width:161px" %)AT+RJTDC=10|(% style="width:138px" %)Set RJTDC time interval|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X26000A:

26:fixed command

000A:0X000A=10(min)

for details, check wiki

871

)))

872

|(% style="width:161px" %) |(% style="width:138px" %)Retrieve stored data for a specified period of time|(% style="width:243px" %) |(% style="width:1001px" %)(((

873

0X3161DE7C7061DE8A800A:

31:fixed command

61DE7C70:0X61DE7C70=2022/1/12 15:00:00

878

879

61DE8A80:0X61DE8A80=2022/1/12 16:00:00

0A:0X0A=10(second)

View details 2.6.2

)))

|(% style="width:161px" %)AT+DDETECT=?|(% style="width:138px" %)View the current DDETECT setting status and time|(% style="width:243px" %)(((

0,1440

OK

)))|(% style="width:1001px" %)Default 0,1440(min)

890

|(% style="width:161px" %)AT+DDETECT=1,1440|(% style="width:138px" %)(((

891

Set DDETECT setting status and time

892

893

((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))

894

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X320005A0:close

0X320105A0:open

32:fixed command

05A0:0X05A0=1440(min)

902

)))

903

|(% style="width:161px" %) |(% style="width:138px" %)(((

904

Downlink Modification Alarm Mode

905

906

(AT+WMOD,AT+CITEMP,AT+ARTEMP)

907

)))|(% style="width:243px" %) |(% style="width:1001px" %)(((

0XAA010002000F00032:

AA:fixed command

01:0X01=1(AT+MOD)

0002:0X0002=2(AT+CITEMP)

915

916

000F:0X000F=15(AT+ARTEMP)

917

918

0032:0X0032=50(AT+ARTEMP)

919

)))

920

921

(% class="wikigeneratedid" %)

922

== ==

923

== 3.2 Set Password ==

924

925

Feature: Set device password, max 9 digits.

926

927

(% style="color:#4f81bd" %)**AT Command: AT+PWORD**

928

929

[[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]

930

931

932

(% style="color:#4f81bd" %)**Downlink Command:**

933

934

No downlink command for this feature.

= 4. Battery & How to replace =

939

940

== 4.1 Battery Type and replace ==

941

942

LHT52 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). User can buy generic AAA battery and replace it.

943

944

(% style="color:red" %)**Note: **

945

946

1. The LHT52 doesn’t have any screw, use can use nail to open it by the middle.

947

948

[[image:image-20220621143535-5.png]]

949

950

951

2. Make sure the direction is correct when install the AAA batteries.

952

953

[[image:image-20220621143535-6.png]]

== 4.2 Power Consumption Analyze ==

959

960

Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

961

962

Instruction to use as below:

963

964

(% style="color:blue" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

965

966

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

967

968

969

(% style="color:blue" %)**Step 2**(%%): (% style="display:none" %) (%%)Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

976

977

[[image:image-20220621143643-7.png||height="429" width="1326"]]

= 5. Sensors and Accessories =

983

984

== 5.1 Temperature Probe (AS-01) ==

985

986

External Temperature Probe base on DS18B20. (note: Default Package doesn’t include AS-01)

987

988

[[image:image-20220621141939-4.png]] [[image:image-20220621141546-2.png||height="428" width="285"]](% style="display:none" %)

989

990

991

**External Temperature Probe (AS-01):(% style="display:none" %) (%%)**

992

993

* Resolution: 0.0625 °C

994

* ±0.5°C accuracy from -10°C to +85°C

995

* ±2°C accuracy from -55°C to +125°C

996

* Operating Range: -55 °C ~~ 125 °C

997

* Cable Length: 2 meters

998

999

== 5.2 Program Converter (AS-02) ==

1000

1001

AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:

1002

1003

1. Access AT console of LHT52 when used with USB-TTL adapter. [[See this link>>path:#AT_COMMAND]].

1004

1. Update firmware to LHT52 when used with DAP-Link adapter. [[See this link>>url:https://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction#LHT52]].

1005

1006

[[image:image-20220621141724-3.png]]

= 6. FAQ =

== 6.1 How to use AT Command to configure LHT52 ==

1014

1015

LHT52 supports AT Command set. User can use a USB to TTL adapter plus the Program Cable to connect to LHT52 for using AT command, as below.

1016

1017

[[image:image-20220621144150-8.png||height="537" width="724"]]

**Connection:**

* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin

1023

* (% style="background-color:yellow" %)USB to TTL RXD <~-~-> Program Converter D+ pin

1024

* (% style="background-color:yellow" %)USB to TTL TXD <~-~-> Program Converter A11 pin

1025

1026

It is also possible to connect using DAPLink

1027

1028

[[image:image-20220621144235-9.png||height="485" width="729"]]

**Connection:**

* (% style="background-color:yellow" %)USB to DAP-LINK GND <~-~-> Program Converter GND pin

1033

* (% style="background-color:yellow" %)USB to DAP-LINK RXD <~-~-> Program Converter D+ pin

1034

* (% style="background-color:yellow" %)USB to DAP-LINK TXD <~-~-> Program Converter A11 pin

1035

1036

In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**115200**(%%) to access to access serial console for LHT52. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.

1037

1038

Input password and ATZ to activate LHT52,As shown below:

1039

1040

1041

[[image:image-20220621144235-10.png]]

== 6.2 AT Command and Downlink ==

1046

1047

Sending ATZ will reboot the node

1048

1049

Sending AT+FDR will restore the node to factory settings

1050

1051

Get the node's AT command setting by sending AT+CFG

Example：

AT+VER=EU868 v1.0

AT+NJM=1

AT+DEUI=25 32 12 45 65 26 12 35

1060

1061

AT+APPEUI=25 32 12 45 65 26 32 16

1062

1063

AT+APPKEY=25 32 12 45 65 26 32 16 89 48 85 65 45 87 89 55

AT+DADDR=00 00 00 00

AT+APPSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

1068

1069

AT+NWKSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

AT+NWKID=00 00 00 13

AT+ADR=1

AT+DR=5

AT+TXP=1

AT+CHS=0

AT+CLASS=A

AT+CFM=0

AT+JN1DL=5000

AT+JN2DL=6000

AT+RX1DL=5000

AT+RX2DL=6000

AT+RX1WTO=24

AT+RX2WTO=6

AT+RX2FQ=869525000

AT+RX2DR=0

AT+RPL=0

AT+FCU=6

AT+FCD=0

AT+CFS=0

AT+NJS=1

AT+DCS=0

AT+PNM=1

AT+PWORD=123456

AT+EXT=1

AT+TDC=120000

AT+TIMESTAMP=1640851037 2021 12 30 7 57 17

AT+RJTDC=20

AT+DDETECT=0,1440

AT+WMOD=0

AT+CITEMP=1

AT+ARTEMP=-40,125

Send AT+PDTA=? to get the stored 174 data

**Example：**

[[image:image-20220621144804-11.png]]

== 6.3 How to upgrade the firmware? ==

1142

1143

LHT52 requires a program converter to upload images to LHT52, which is used to upload image to LHT52 for:

1144

1145

* Support new features

1146

* For bug fix

1147

* Change LoRaWAN bands.

1148

1149

User can check this link for the detail of operation of firmware upgrade: [[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]

== 6.4 How to change the LoRa Frequency Bands/Region? ==

1154

1155

User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.

= 7. Order Info =

== 7.1 Main Device ==

1163

1164

Part Number: (% style="color:#4472c4" %)**LHT65N-XX**

1165

1166

(% style="color:#4472c4" %)**XX **(%%): The default frequency band

1167

1168

* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band

1169

* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band

1170

* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band

1171

* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band

1172

* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band

1173

* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band

1174

* (% style="color:red" %)**IN865**(%%)**: **LoRaWAN IN865 band

1175

* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band

1176

1177

== 7.2 Accessories ==

1178

1179

(% style="color:red" %)Note: below accessories are not include in the main device package, need to order separately.

1180

1181

**Temperature Probe: (% style="color:red" %)AS-01(%%)**

1182

1183

**Program Converter: (% style="color:red" %)AS-02(%%)**

= 8. Packing Info =

**Package Includes**:

1190

1191

* LHT52 Temperature & Humidity Sensor x 1

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1196

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].

= 10. FCC Warning =

This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:

1201

1202

(1) This device may not cause harmful interference;

1203

1204

(2) this device must accept any interference received,including interference that may cause undesired operation.