LHT52 - LoRaWAN Temperature & Humidity Sensor User Manual

The Dragino LHT52 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor. It includes a (% style="color:blue" %)**built-in Temperature & Humidity sensor** (%%)and has a USB Type-C sensor connector to connect to external sensors such as external Temperature Sensor.

27

)))

28

29

(((

30

LHT52 (% style="color:blue" %)**senses environment temperature and humidity**(%%) and send these values via long-range wireless LoRaWAN protocol. It targets professional wireless sensor network applications such as food service, smart metering, smart cities, building automation, and so on.

)))

(((

LHT52 supports(% style="color:blue" %)** 2 x AAA batteries **(%%)and works for a long time up to several years. Use can replace the batteries easily after they are finished.

)))

(((

LHT52 is fully compatible with LoRaWAN v1.0.3 protocol, it can work with standard LoRaWAN gateway.

)))

(((

LHT52 supports(% style="color:blue" %)** Datalog feature** (%%)to make sure users won’t miss sensor data. It records sensor value for every uplink. These values can be retrieved by LoRaWAN server via downlink command.

)))

(((

LHT52 supports(% style="color:blue" %)** temperature alarm feature**(%%). It can uplink alarm in a short interval while temperature exceeds preset limits.

)))

(((

*Battery life depends how often to send data, please see [[battery analyzer>>||anchor="H4.2A0PowerConsumptionAnalyze"]].

51

)))

52

53

[[image:1655774519494-861.png]]

== 1.2 Features ==

* Wall Attachable.

* LoRaWAN v1.0.3 Class A protocol.

60

* Built-in Temperature & Humidity sensor

61

* Optional External Probe

62

* Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915

63

* AT Commands to change parameters

64

* Remote configure parameters via LoRaWAN Downlink

65

* Firmware upgradable via program port

66

* Support 2 x AAA LR03 batteries.

* Datalog feature

* IP Rating: IP52

== 1.3 Specification ==

73

74

75

**Built-in Temperature Sensor:**

76

77

* Resolution: 0.01 °C

78

* Accuracy Tolerance: Typ ±0.3 °C

79

* Long Term Drift: < 0.02 °C/yr

80

* Operating Range: -20 ~~ 50 °C

81

82

**Built-in Humidity Sensor:**

83

84

* Resolution: 0.1 %RH

85

* Accuracy Tolerance: Typ ±3 %RH

86

* Long Term Drift: < 0.02 °C/yr

87

* Operating Range: 0 ~~ 99.0 %RH(no Dew)

== 1.4 Power Consumption ==

92

93

LHT52 (without external sensor): Idle: 5uA, Transmit: max 110mA

94

95

LHT52 + External Temperature Probe (AS-01): Idle: 6uA, Transmit: max 110mA.

== 1.5 Storage & Operation Temperature ==

-20°C to +50°C

== 1.6 Applications ==

106

107

* Smart Buildings & Home Automation

108

* Logistics and Supply Chain Management

* Smart Metering

* Smart Agriculture

* Smart Cities

* Smart Factory

= 2. Operation Mode =

116

117

== 2.1 How it work? ==

118

119

Each LHT52 is shipped with a worldwide unique set of LoRaWAN OTAA keys. To use LHT52 in a LoRaWAN network, user needs to input the OTAA keys in LoRaWAN network server. After this, if LHT52 is under this LoRaWAN network coverage, LHT52 can join the LoRaWAN network and start to transmit sensor data. The default period for each uplink is** 20 minutes**.

120

121

122

== 2.2 How to Activate LHT52? ==

123

124

(% style="color:red" %)** 1. Open enclosure from below position.**

125

126

[[image:image-20220621093835-1.png]]

127

128

129

(% style="color:red" %)** 2. Insert 2 x AAA LR03 batteries.**

130

131

[[image:image-20220621093835-2.png]]

132

133

134

(% style="color:red" %)** 3. Press the reset button to activate device.**

135

136

[[image:image-20220621093835-3.png]]

137

138

139

User can check [[LED Status>>||anchor="H2.8LEDIndicator"]] to know the working state of LHT52.

== 2.3 Example to join LoRaWAN network ==

144

145

This section shows an example for how to join the [[TheThingsNetwork>>url:https://www.thethingsnetwork.org/]] LoRaWAN IoT server. Usages with other LoRaWAN IoT servers are of similar procedure.

146

147

(% _mstvisible="1" class="wikigeneratedid" %)

148

[[image:1655775912928-657.png]]

149

150

Assume the DLOS8 is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. We need to add the LHT52 device in TTN V3 portal.

151

152

153

(% style="color:blue" %)**Step 1**(%%): Create a device in TTN V3 with the OTAA keys from LHT52.

154

155

Each LHT52 is shipped with a sticker with the default DEV EUI as below:

156

157

158

[[image:image-20220617150003-1.jpeg]]

159

160

161

Enter these keys in the LoRaWAN Server portal. Below is TTN V3 screen shot:

162

163

Add APP EUI in the application.

164

165

choose to create the device manually.

166

167

Add APP KEY and DEV EUI

168

169

170

[[image:image-20220522232916-3.png||_mstalt="430495" _mstvisible="3"]]

171

172

[[image:1655776122894-257.png]]

**Default mode OTAA**

177

178

179

[[image:1655776241177-240.png]]

(% style="color:blue" %)**Step 2**(%%): Use ACT button to activate LHT52 and it will auto join to the TTN V3 network. After join success, it will start to upload sensor data to TTN V3 and user can see in the panel.

184

185

[[image:image-20220621095134-4.png]]

== 2.4 Uplink Payload ==

190

191

Uplink payloads include two types: Valid Sensor Value and other status / control command.

192

193

* Valid Sensor Value: Use FPORT=2

194

* Other control command: Use FPORT other than 2.

195

196

=== 2.4.1 Uplink FPORT~=5, Device Status ===

197

198

Uplink the device configures with FPORT=5. Once LHT52 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.

199

200

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:462px" %)

[[image:image-20220621100550-5.png]]

205

206

Example Payload (FPort=5): [[image:image-20220621105116-11.png]]

207

208

209

(% style="color:#4472c4" %)**Sensor Model**(%%): For LHT52, this value is 0x09.

210

211

(% style="color:#4472c4" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version.

212

213

(% style="color:#4472c4" %)**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

(% style="color:#4472c4" %)**Sub-Band**(%%): value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)

237

238

(% style="color:#4472c4" %)**BAT**(%%): shows the battery voltage for LHT52.

Ex1: 0x0B3A = 2874mV

Use can also get the Device Status uplink through the downlink command:

244

245

(% style="color:#4472c4" %)**Downlink: 0x2301**

246

247

248

[[image:image-20220621100550-6.png||height="504" width="1491"]]

=== 2.4.2 Uplink FPORT~=2, Real time sensor value ===

253

254

LHT52 will send this uplink after Device Status uplink once join LoRaWAN network successfully. And it will periodically send this uplink. Default interval is 20 minutes and [[can be changed>>||anchor="H3.1A0DownlinkCommandSet"]].

255

256

Uplink uses FPORT=2 and every 20 minutes send one uplink by default.

257

258

(% _mstvisible="1" border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:426px" %)

259

(% _mstvisible="3" %)|=(% _mstvisible="4" style="width: 97px;" %)(% _mstvisible="5" %)

260

(((

261

(% _mstvisible="6" %)

262

(% _msthash="1817478" _msttexthash="161122" _mstvisible="8" %)**Size(bytes)**

263

)))|=(% _mstvisible="4" style="width: 39px;" %)(% _mstvisible="5" %)

264

(((

265

(% _mstvisible="6" %)

266

(% _msthash="1817479" _msttexthash="4550" _mstvisible="8" %)**2**

267

)))|=(% _mstvisible="4" style="width: 100px;" %)(% _mstvisible="5" %)

268

(((

269

(% _mstvisible="6" %)

270

(% _msthash="1817480" _msttexthash="4550" _mstvisible="8" %)**2**

271

)))|=(% _mstvisible="4" style="width: 77px;" %)(% _mstvisible="5" %)

272

(((

273

(% _mstvisible="6" %)

274

(% _msthash="1817481" _msttexthash="4550" _mstvisible="8" %)**2**

275

)))|=(% _mstvisible="4" style="width: 47px;" %)(% _mstvisible="5" %)

276

(((

277

(% _mstvisible="6" %)

278

(% _msthash="1817482" _msttexthash="4459" _mstvisible="8" %)**1**

279

)))|=(% _mstvisible="4" style="width: 51px;" %)(% _mstvisible="5" %)

280

(((

281

(% _mstvisible="6" %)

282

(% _msthash="1817483" _msttexthash="4732" _mstvisible="8" %)**4**

283

)))

284

(% _mstvisible="3" %)|(% _mstvisible="4" style="width:97px" %)(% _mstvisible="5" %)

285

(((

286

(% _mstvisible="6" %)

287

(% _msthash="1817484" _msttexthash="60203" _mstvisible="8" %)**Value**

288

)))|(% _mstvisible="4" style="width:39px" %)(% _mstvisible="5" %)

289

(((

290

(% _mstvisible="6" %)

291

[[Temperature>>||anchor="HTemperature26ExternalTemperature:" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]

292

)))|(% _mstvisible="4" style="width:100px" %)(% _mstvisible="5" %)

293

(((

294

(% _mstvisible="6" %)

295

(((

296

(% _mstvisible="7" %)

297

[[Humidity>>||anchor="HHumidity:" _msthash="2224744" _msttexthash="117429" _mstvisible="8"]]

298

299

(% _mstvisible="7" %)

300

301

)))

302

)))|(% _mstvisible="4" style="width:77px" %)(% _mstvisible="5" %)

303

(((

304

(% _mstvisible="6" %)

305

(((

306

(% _mstvisible="7" %)

307

[[External Temperature>>||anchor="HTemperature26ExternalTemperature:" _msthash="2224742" _msttexthash="405769" _mstvisible="8"]]

308

)))

309

)))|(% _mstvisible="4" style="width:47px" %)(% _mstvisible="5" %)

310

(((

311

(% _mstvisible="6" %)

312

[[Ext>>||anchor="HExtension23" _msthash="1817486" _msttexthash="32331" _mstvisible="7"]] #

313

)))|(% _mstvisible="4" style="width:51px" %)(((

314

[[Unix TimeStamp>>||anchor="H2.6.1A0UnixTimeStamp" _msthash="1817487" _msttexthash="116545" _mstvisible="7"]]

)))

**Temperature:**

[[image:image-20220621101526-7.png]]

320

321

Example Payload (FPort=2): (% style="background-color:yellow" %)**08 CD 02 20 7F FF 01 61 CD 4E DD**

322

323

324

==== **Temperature & External Temperature:** ====

325

326

* Example1: 0x08CD/100=22.53℃

327

* Example2: (0xF5C6-65536)/100=-26.18℃

328

329

==== **Humidity:** ====

330

331

* Humidity: 0x0220/10=54.4%

332

333

==== **Extension #** ====

334

335

Bytes for External Sensor:

336

337

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:310px" %)

338

|=(% style="width: 103px;" %)**EXT # Value**|=(% style="width: 203px;" %)**External Sensor Probe**

339

|(% style="width:103px" %)0x01|(% style="width:203px" %)Sensor AS-01, Temperature

340

341

=== 2.4.3 Uplink FPORT~=3, Datalog sensor value ===

342

343

LHT52 stores sensor value and user can retrieve these history value via downlink command. The Datalog sensor value are sent via FPORT=3.

344

345

[[image:image-20220621101659-8.png]]

346

347

348

* Each data entry is 11 bytes, to save airtime and battery, LHT52 will send max bytes according to the current DR and Frequency bands.

349

350

For example, in US915 band, the max payload for different DR is:

351

352

1. DR0: max is 11 bytes so one entry of data

353

1. DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)

354

1. DR2: total payload includes 11 entries of data

355

1. DR3: total payload includes 22 entries of data.

356

357

(% style="color:red" %)**Notice**: LHT52 will save 178 set of history data, If device doesn't have any data in the polling time. Device will uplink 11 bytes of 0.

358

359

See more info about the [[Datalog feature>>||anchor="H2.6A0DatalogFeature"]].

=== 2.4.4 Uplink FPORT~=4, DS18B20 ID ===

365

366

User can get external DS18B20 ID through the downlink command.

Downlink:0x2302

[[image:image-20220621101853-9.png]]

371

372

Example Payload (FPort=4): (% style="color:#037691" %)**28 86 63 B2 00 00 00 9F**

373

374

The External DS18B20 ID is 0x28 86 63 B2 00 00 00 9F

=== 2.4.5 Decoder in TTN V3 ===

379

380

In LoRaWAN protocol, the uplink payload is HEX format, user need to add a payload formatter/decoder in LoRaWAN Server to get human friendly string.

381

382

In TTN , add formatter as below:

383

384

[[image:image-20220621102026-10.png]]

385

386

(((

387

Please check the decoder from this link:

388

389

(((

390

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LHT52/Decoder/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LHT52/Decoder/]]

== 2.5 Show data on Datacake ==

396

397

(((

398

Datacake IoT platform provides a human friendly interface to show the sensor data in charts, once we have sensor data in TTN V3, we can use Datacake to connect to TTN V3 and see the data in Datacake. Below are the steps:

)))

(((

)))

(((

(% style="color:blue" %)**Step 1**(%%): Be sure that your device is programmed and properly connected to the LoRaWAN network.

)))

(((

(% style="color:blue" %)**Step 2**(%%): Configure your Application to forward data to Datacake you will need to add integration. Go to TTN V3 Console ~-~-> Applications ~-~-> Integrations ~-~-> Add Integrations.

)))

(((

~1. Add Datacake:

)))

(((

2. Select default key as Access Key:

)))

(((

3. In Datacake console ([[https:~~/~~/datacake.co/>>url:https://datacake.co/]]) , add LHT52:

)))

(((

Please refer to the figure below

)))

[[image:image-20220621112422-1.png]]

Log in to DATACAKE, copy the API under the account

435

436

[[image:image-20220621112422-2.png]]

437

438

439

[[image:image-20220621112422-3.png]]

[[image:image-20220621112422-4.png]]

444

445

446

[[image:image-20220621112422-5.png]]

447

448

449

[[image:image-20220621112422-6.png]]

450

451

452

[[image:image-20220621112422-7.png]]

453

454

[[image:image-20220621112422-8.png]]

455

456

457

[[image:image-20220621112422-9.png]]

458

459

460

[[image:image-20220621112422-10.png||height="372" width="1215"]]

461

462

463

Copy and paste the [[TTN decoder>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LHT52/Decoder/]] here and save

464

465

[[image:image-20220621112422-11.png||height="575" width="1215"]]

466

467

468

Visual widgets please read the DATACAKE documentation

469

470

[[image:image-20220621112422-12.png||height="713" width="1180"]]

== 2.6 Datalog Feature ==

477

478

(% _msthash="315262" _msttexthash="32283004" _mstvisible="1" %)

479

When user want to retrieve sensor value, he can send a poll command from the IoT platform to ask sensor to send value in the required time slot.

=== 2.6.1 Unix TimeStamp ===

484

485

Unix TimeStamp shows the sampling time of uplink payload. format base on

486

487

[[image:image-20220523001219-11.png||_mstalt="450450" _mstvisible="3" height="97" width="627"]]

488

489

User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/||_mstvisible="3"]] :

490

491

For example: if the Unix Timestamp we got is hex 0x60137afd, we can convert it to Decimal: 1611889405. and then convert to the time: 2021 – Jan ~-~- 29 Friday 03:03:25 (GMT)

492

493

494

[[image:1655782409139-256.png]]

=== 2.6.2 Poll sensor value ===

500

501

(((

502

User can poll sensor value based on timestamps from the server. Below is the downlink command.

)))

(((

Timestamp start and Timestamp end use Unix TimeStamp format as mentioned above. Devices will reply with all data log during this time period, use the uplink interval.

)))

(((

For example, downlink command [[image:image-20220621113526-13.png]] (% _mstvisible="3" style="display:none" %)

)))

(((

Is to check 2020/12/1 07:40:00 to 2020/12/1 08:40:00's data

)))

(((

Uplink Internal =5s，means LHT52 will send one packet every 5s. range 5~~255s.

)))

=== 2.6.3 Datalog Uplink payload ===

525

526

See [[Uplink FPORT=3, Datalog sensor value>>||anchor="H2.4.3A0UplinkFPORT3D32CDatalogsensorvalue"]]

== 2.7 Alarm Mode ==

(((

When device is in Alarm mode, it will check the built-in sensor temperature in a short interval. If the temperature exceeds the pre-configure range, it will send an uplink immediately.

)))

(((

The alarm mode can be modified by AT command or downlink, Alarm mode is disabled by default.

)))

(((

If you need to enable the Alarm mode, please refer to the following

)))

(((

(% style="color:red" %)**Note: Alarm mode will increase the power consumption, we recommend extending the normal uplink time (20 minutes default) when enable this feature.**

)))

(((

)))

(((

(% style="color:blue" %)**AT Commands for Alarm mode:**

)))

(((

(% style="color:#037691" %)**AT+WMOD=1**(%%)**: ** Enable/Disable Alarm Mode. (0:Disable, 1: Enable),need to reset the node to take effect

)))

(((

(% style="color:#037691" %)**AT+CITEMP=1**(%%)**: ** The interval to check temperature for Alarm. (Unit: minute)

)))

(((

(% style="color:#037691" %)**AT+ARTEMP=-40,125**(%%)**: ** Set the normal temperature range from -40°C to 125°C

)))

(((

Suppose you want to set the normal temperature from 15°C to 50°C, and turn on the alarm mode, and check the temperature every 2 minutes. Please refer to the following

571

)))

572

573

[[image:image-20220621114109-14.png]]

574

575

[[image:image-20220621114109-15.png]]

(((

Modification via downlink,Take TTN_V3 as an example((% style="color:red" %)downlink commands, please refer to the downlink command set for details(%%))

)))

(((

In order to ensure that the node is indeed modified by downlink, I reset the node to factory settings first.

584

)))

585

586

[[image:image-20220621114109-16.png]]

587

588

589

[[image:image-20220621114109-17.png||height="583" width="1274"]]

590

591

[[image:image-20220621114109-18.png]]

592

593

594

Or use a downlink directly: AA010002000F0032 ([[See command info>>||anchor="H3.1A0DownlinkCommandSet"]])

595

596

[[image:image-20220621114109-19.png||height="178" width="1292"]]

== 2.8 LED Indicator ==

601

602

The LHT52 has a triple color LED which for easy showing different stage.

603

604

(% style="color:#037691" %)**In a normal working state**:

605

606

* When the node is restarted, (% style="color:green" %)**GREEN**, (% style="color:red" %)**RED**(%%) and (% style="color:blue" %)**BLUE**(%%) are sequentially lit.

607

608

* During OTAA Join:

609

** **For each Join Request uplink:** the (% style="color:green" %)**GREEN LED** (%%)will blink once.

610

** **Once Join Successful:** the (% style="color:green" %)**GREEN LED**(%%) will be solid on for 5 seconds.

611

612

* After joined, for each uplink, the (% style="color:blue" %)**BLUE LED**(%%) or (% style="color:green" %)**GREEN LED** (%%)will blink once.

613

** (% style="color:blue" %)**BLUE LED**(%%) when external sensor is connected

614

** (% style="color:green" %)**GREEN LED**(%%) when external sensor is not connected

615

616

* For each success downlink, the (% style="color:purple" %)**PURPLE LED**(%%) will blink once

617

618

(% style="color:#037691" %)**In AT Command Mode:**

619

620

If user use console cable to send AT Command to LHT52, the (% style="color:red" %)**RED LED**(%%) will always on until:

621

622

* Power off/on LHT52

623

* Press reset button of LHT52.

624

* Send an AT Command: AT+CLPM=1

== 2.9 Button ==

Press the button LHT52 will reset and join network again.

= 3. Configure LHT52 via AT command or LoRaWAN downlink =

633

634

Use can configure LHT52 via AT Command or LoRaWAN Downlink.

635

636

* AT Command Connection: See [[FAQ>>||anchor="H6.FAQ"]].

637

638

* LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]

639

640

There are two kinds of commands to configure LHT52, they are:

641

642

* (% style="color:#4f81bd" %)**General Commands:**

643

644

These commands are to configure:

645

646

* General system settings like: uplink interval.

647

648

* LoRaWAN protocol & radio-related commands.

649

650

They are the same for all Dragino Devices which supports DLWS-005 LoRaWAN Stack(Note~*~*). These commands can be found on the wiki: [[End Device Downlink Command>>doc:Main.End Device AT Commands and Downlink Command.WebHome]]

651

652

653

* (% style="color:#4f81bd" %)**Commands special design for LHT52**

654

655

These commands are only valid for LHT52, as below:

656

657

658

== 3.1 Downlink Command Set ==

659

660

661

(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:520px" %)

662

|=(% style="width: 161px;" %)**Command Example**|=(% style="width: 138px;" %)**Function**|=(% style="width: 243px;" %)**Response**|=(% style="width: 1001px;" %)**Downlink**

663

|(% style="width:161px" %)AT+TDC=?|(% style="width:138px" %)View current TDC time|(% style="width:243px" %)(((

1200000

OK

)))|(% style="width:1001px" %)Default 1200000(ms)

669

|(% style="width:161px" %)AT+TDC=300000|(% style="width:138px" %)Set TDC time|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X0100012C:

01:fixed command

00012C:0X00012C=300(seconds)

675

)))

676

|(% style="width:161px" %)ATZ|(% style="width:138px" %)Reset node|(% style="width:243px" %) |(% style="width:1001px" %)0x04FF

677

|(% style="width:161px" %)AT+FDR|(% style="width:138px" %)Restore factory settings|(% style="width:243px" %) |(% style="width:1001px" %)0X04FE

678

|(% style="width:161px" %)AT+CFM=?|(% style="width:138px" %)View the current confirmation mode status|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

683

|(% style="width:161px" %)AT+CFM=1|(% style="width:138px" %)Turn on confirmation mode|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x0500:close

0x0501:open

05:fixed command

)))

|(% style="width:161px" %)AT+CHE=?|(% style="width:138px" %)View the current sub-band select 0-7, the default is 0|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

695

|(% style="width:161px" %)AT+CHE=2|(% style="width:138px" %)(((

Set subband to 2

(CN470,US915,AU915)

)))|(% style="width:243px" %)(((

700

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0X0702:

07:fixed command

02:Select subband 2

)))

|(% style="width:161px" %)AT+WMOD=?|(% style="width:138px" %)View the current alarm mode status|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

717

|(% style="width:161px" %)AT+WMOD=1|(% style="width:138px" %)Turn on alarm mode|(% style="width:243px" %)(((

718

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0xA501:open

0XA500:close

A5:fixed command

)))

|(% style="width:161px" %)AT+CITEMP=?|(% style="width:138px" %)View the current temperature detection time interval|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1(min)

737

|(% style="width:161px" %)AT+CITEMP=2|(% style="width:138px" %)Set the temperature detection time interval to 2min|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0XA70002

A7:fixed command

0002:0X0002=2(min)

)))

|(% style="width:161px" %)AT+NJM=?|(% style="width:138px" %)Check the current network connection method|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1

749

|(% style="width:161px" %)AT+NJM=0|(% style="width:138px" %)Change the network connection method to ABP|(% style="width:243px" %)(((

750

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0X2000:ABP

0x2001:OTAA

20:fixed command

)))

|(% style="width:161px" %)AT+RPL=?|(% style="width:138px" %)View current RPL settings|(% style="width:243px" %)(((

0

OK

)))|(% style="width:1001px" %)Default 0

769

|(% style="width:161px" %)AT+RPL=1|(% style="width:138px" %)set RPL=1|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2101:

21:fixed command

01:for details, check wiki

775

)))

776

|(% style="width:161px" %)AT+ADR=?|(% style="width:138px" %)View current ADR status|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 0

781

|(% style="width:161px" %)AT+ADR=0|(% style="width:138px" %)Set the ADR state to off|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0x2200:close

0x2201:open

22:fixed command

)))

|(% style="width:161px" %)AT+DR=?|(% style="width:138px" %)View the current DR settings|(% style="width:243px" %)OK|(% style="width:1001px" %)

789

|(% style="width:161px" %)AT+DR=1|(% style="width:138px" %)(((

790

set DR to 1

791

792

It takes effect only when ADR=0

793

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00:ADR=0

01:DR=1

01:TXP=1

22:fixed command

)))

|(% style="width:161px" %)AT+TXP=?|(% style="width:138px" %)View the current TXP|(% style="width:243px" %)OK|(% style="width:1001px" %)

805

|(% style="width:161px" %)AT+TXP=1|(% style="width:138px" %)(((

806

set TXP to 1

807

808

It takes effect only when ADR=0

809

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X22000101:

00:ADR=0

01:DR=1

01:TXP=1

22:fixed command

)))

|(% style="width:161px" %) |(% style="width:138px" %)Upload node configuration or DS18B20 ID|(% style="width:243px" %) |(% style="width:1001px" %)(((

821

0X2301:Upload node configuration

822

823

0x2302:Upload DS18B20 ID

23:fixed command

)))

|(% style="width:161px" %)AT+DWELL=?|(% style="width:138px" %)Check the high-rate upload settings|(% style="width:243px" %)(((

1

OK

)))|(% style="width:1001px" %)Default 1

832

|(% style="width:161px" %)AT+DWELL=1|(% style="width:138px" %)(((

Set high rate upload

(AS923,AU915)

)))|(% style="width:243px" %)(((

837

Attention:Take effect after ATZ

OK

)))|(% style="width:1001px" %)(((

0x2501:close

0x2500:open

25:fixed command

for details, check wiki

850

)))

851

|(% style="width:161px" %)AT+RJTDC=?|(% style="width:138px" %)View current RJTDC set time|(% style="width:243px" %)(((

20

OK

)))|(% style="width:1001px" %)Default 20(min)

856

|(% style="width:161px" %)AT+RJTDC=10|(% style="width:138px" %)Set RJTDC time interval|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X26000A:

26:fixed command

000A:0X000A=10(min)

for details, check wiki

864

)))

865

|(% style="width:161px" %) |(% style="width:138px" %)Retrieve stored data for a specified period of time|(% style="width:243px" %) |(% style="width:1001px" %)(((

866

0X3161DE7C7061DE8A800A:

31:fixed command

61DE7C70:0X61DE7C70=2022/1/12 15:00:00

871

872

61DE8A80:0X61DE8A80=2022/1/12 16:00:00

0A:0X0A=10(second)

View details 2.6.2

)))

|(% style="width:161px" %)AT+DDETECT=?|(% style="width:138px" %)View the current DDETECT setting status and time|(% style="width:243px" %)(((

0,1440

OK

)))|(% style="width:1001px" %)Default 0,1440(min)

883

|(% style="width:161px" %)AT+DDETECT=1,1440|(% style="width:138px" %)(((

884

Set DDETECT setting status and time

885

886

((% style="color:red" %)When the node does not receive the downlink packet within the set time, it will re-enter the network(%%))

887

)))|(% style="width:243px" %)OK|(% style="width:1001px" %)(((

0X320005A0:close

0X320105A0:open

32:fixed command

05A0:0X05A0=1440(min)

895

)))

896

|(% style="width:161px" %) |(% style="width:138px" %)(((

897

Downlink Modification Alarm Mode

898

899

(AT+WMOD,AT+CITEMP,AT+ARTEMP)

900

)))|(% style="width:243px" %) |(% style="width:1001px" %)(((

0XAA010002000F00032:

AA:fixed command

01:0X01=1(AT+MOD)

0002:0X0002=2(AT+CITEMP)

908

909

000F:0X000F=15(AT+ARTEMP)

910

911

0032:0X0032=50(AT+ARTEMP)

)))

== 3.2 Set Password ==

916

917

Feature: Set device password, max 9 digits.

918

919

(% style="color:#4f81bd" %)**AT Command: AT+PWORD**

920

921

[[image:image-20220523151052-5.png||_mstalt="428623" _mstvisible="3"]]

922

923

924

(% style="color:#4f81bd" %)**Downlink Command:**

925

926

No downlink command for this feature.

= 4. Battery & How to replace =

931

932

== 4.1 Battery Type and replace ==

933

934

LHT52 uses 2 x AAA LR03(1.5v) batteries. If the batteries running low (shows 2.1v in the platform). User can buy generic AAA battery and replace it.

935

936

(% style="color:red" %)**Note: **

937

938

1. The LHT52 doesn’t have any screw, use can use nail to open it by the middle.

939

940

[[image:image-20220621143535-5.png]]

941

942

943

2. Make sure the direction is correct when install the AAA batteries.

944

945

[[image:image-20220621143535-6.png]]

== 4.2 Power Consumption Analyze ==

951

952

Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

953

954

Instruction to use as below:

955

956

(% style="color:blue" %)**Step 1**(%%): Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from:

957

958

[[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]

959

960

961

(% style="color:blue" %)**Step 2**(%%): (% style="display:none" %) (%%)Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

968

969

[[image:image-20220621143643-7.png||height="429" width="1326"]]

= 5. Sensors and Accessories =

975

976

== 5.1 Temperature Probe (AS-01) ==

977

978

External Temperature Probe base on DS18B20. (note: Default Package doesn’t include AS-01)

979

980

[[image:image-20220621141939-4.png]] [[image:image-20220621141546-2.png||height="428" width="285"]](% style="display:none" %)

981

982

983

**External Temperature Probe (AS-01):(% style="display:none" %) (%%)**

984

985

* Resolution: 0.0625 °C

986

* ±0.5°C accuracy from -10°C to +85°C

987

* ±2°C accuracy from -55°C to +125°C

988

* Operating Range: -55 °C ~~ 125 °C

989

* Cable Length: 2 meters

990

991

== 5.2 Program Converter (AS-02) ==

992

993

AS-02 is an optional accessory, it is USB Type-C converter. AS-02 provide below feature:

994

995

1. Access AT console of LHT52 when used with USB-TTL adapter. [[See this link>>path:#AT_COMMAND]].

996

1. Update firmware to LHT52 when used with DAP-Link adapter. [[See this link>>url:https://wiki.dragino.com/index.php?title=Firmware_Upgrade_Instruction#LHT52]].

997

998

[[image:image-20220621141724-3.png]]

= 6. FAQ =

== 6.1 How to use AT Command to configure LHT52 ==

1006

1007

LHT52 supports AT Command set. User can use a USB to TTL adapter plus the Program Cable to connect to LHT52 for using AT command, as below.

1008

1009

[[image:image-20220621144150-8.png||height="537" width="724"]]

**Connection:**

* (% style="background-color:yellow" %)USB to TTL GND <~-~-> Program Converter GND pin

1015

* (% style="background-color:yellow" %)USB to TTL RXD <~-~-> Program Converter D+ pin

1016

* (% style="background-color:yellow" %)USB to TTL TXD <~-~-> Program Converter A11 pin

1017

1018

It is also possible to connect using DAPLink

1019

1020

[[image:image-20220621144235-9.png||height="485" width="729"]]

**Connection:**

* (% style="background-color:yellow" %)USB to DAP-LINK GND <~-~-> Program Converter GND pin

1025

* (% style="background-color:yellow" %)USB to DAP-LINK RXD <~-~-> Program Converter D+ pin

1026

* (% style="background-color:yellow" %)USB to DAP-LINK TXD <~-~-> Program Converter A11 pin

1027

1028

In PC, User needs to set **serial tool**(such as [[putty>>url:https://www.chiark.greenend.org.uk/~~sgtatham/putty/latest.html]], SecureCRT) baud rate to (% style="color:green" %)**115200**(%%) to access to access serial console for LHT52. The AT commands are disable by default and need to enter password (default:(% style="color:green" %)**123456**(%%)) to active it. Timeout to input AT Command is 5 min, after 5-minute, user need to input password again.

1029

1030

Input password and ATZ to activate LHT52,As shown below:

1031

1032

1033

[[image:image-20220621144235-10.png]]

== 6.2 AT Command and Downlink ==

1038

1039

Sending ATZ will reboot the node

1040

1041

Sending AT+FDR will restore the node to factory settings

1042

1043

Get the node's AT command setting by sending AT+CFG

Example：

AT+VER=EU868 v1.0

AT+NJM=1

AT+DEUI=25 32 12 45 65 26 12 35

1052

1053

AT+APPEUI=25 32 12 45 65 26 32 16

1054

1055

AT+APPKEY=25 32 12 45 65 26 32 16 89 48 85 65 45 87 89 55

AT+DADDR=00 00 00 00

AT+APPSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

1060

1061

AT+NWKSKEY=00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

AT+NWKID=00 00 00 13

AT+ADR=1

AT+DR=5

AT+TXP=1

AT+CHS=0

AT+CLASS=A

AT+CFM=0

AT+JN1DL=5000

AT+JN2DL=6000

AT+RX1DL=5000

AT+RX2DL=6000

AT+RX1WTO=24

AT+RX2WTO=6

AT+RX2FQ=869525000

AT+RX2DR=0

AT+RPL=0

AT+FCU=6

AT+FCD=0

AT+CFS=0

AT+NJS=1

AT+DCS=0

AT+PNM=1

AT+PWORD=123456

AT+EXT=1

AT+TDC=120000

AT+TIMESTAMP=1640851037 2021 12 30 7 57 17

AT+RJTDC=20

AT+DDETECT=0,1440

AT+WMOD=0

AT+CITEMP=1

AT+ARTEMP=-40,125

Send AT+PDTA=? to get the stored 174 data

**Example：**

[[image:image-20220621144804-11.png]]

== 6.3 How to upgrade the firmware? ==

1134

1135

LHT52 requires a program converter to upload images to LHT52, which is used to upload image to LHT52 for:

1136

1137

* Support new features

1138

* For bug fix

1139

* Change LoRaWAN bands.

1140

1141

User can check this link for the detail of operation of firmware upgrade: [[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]

== 6.4 How to change the LoRa Frequency Bands/Region? ==

1146

1147

User can follow the introduction for [[how to upgrade image>>||anchor="H6.3A0Howtoupgradethefirmware3F"]]. When download the images, choose the required image file for download.

= 7. Order Info =

== 7.1 Main Device ==

1155

1156

Part Number: (% style="color:#4472c4" %)**LHT65N-XX**

1157

1158

(% style="color:#4472c4" %)**XX **(%%): The default frequency band

1159

1160

* (% style="color:red" %)**AS923**(%%)**: **LoRaWAN AS923 band

1161

* (% style="color:red" %)**AU915**(%%)**: **LoRaWAN AU915 band

1162

* (% style="color:red" %)**EU433**(%%)**: **LoRaWAN EU433 band

1163

* (% style="color:red" %)**EU868**(%%)**:** LoRaWAN EU868 band

1164

* (% style="color:red" %)**KR920**(%%)**: **LoRaWAN KR920 band

1165

* (% style="color:red" %)**US915**(%%)**: **LoRaWAN US915 band

1166

* (% style="color:red" %)**IN865**(%%)**: **LoRaWAN IN865 band

1167

* (% style="color:red" %)**CN470**(%%)**: **LoRaWAN CN470 band

1168

1169

== 7.2 Accessories ==

1170

1171

(% style="color:red" %)Note: below accessories are not include in the main device package, need to order separately.

1172

1173

**Temperature Probe: (% style="color:red" %)AS-01(%%)**

1174

1175

**Program Converter: (% style="color:red" %)AS-02(%%)**

= 8. Packing Info =

**Package Includes**:

1182

1183

* LHT52 Temperature & Humidity Sensor x 1

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1188

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].

= 10. FCC Warning =

This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:

1194

1195

(1) This device may not cause harmful interference;

1196

1197