Changes for page NSPH01-NB-IoT Soil pH Sensor User Manual

Last modified by Bei Jinggeng on 2024/03/30 17:53

From version < 56.11 >

edited by Xiaoling
on 2023/04/24 09:18

To version < 51.5 >

edited by Xiaoling
on 2022/09/12 15:22

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 0 added, 2 removed)
- image-20220923101327-1.png
- image-20221009000933-1.png

Details

Page properties

Content

@@ -9,34 +9,20 @@
  = 1.  Introduction =
++
  == 1.1  What is NSPH01 Soil pH Sensor ==
--(((
  The Dragino NSPH01 is a (% style="color:blue" %)**NB-IoT soil pH sensor**(%%) for IoT of Agriculture. It is designed to measure the soil pH and soil temperature, so to send to the platform to analyze the soil acid or alkali level. The probe is IP68 waterproof.
--)))
--(((
  NSPH01 probe is made by Solid AgCl reference electrode and Pure metal pH sensitive electrode. It can detect soil's** (% style="color:blue" %)pH (%%)**with high accuracy and stable value. The NSPH01 probe can be buried into soil for long time use.
--)))
--(((
  NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
--)))
++\\NSPH01 supports different uplink methods include (% style="color:blue" %)**TCP,MQTT,UDP and CoAP  **(%%)for different application requirement.
++\\NSPH01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
++\\To use NSPH01, user needs to check if there is NB-IoT coverage in the installation area and with the bands NSPH01 supports. If the local operator supports it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card** (%%)from local operator and install NSPH01 to get NB-IoT network connection.
--(((
--NSPH01 supports different uplink methods include (% style="color:blue" %)**TCP,MQTT,UDP and CoAP  **(%%)for different application requirement.
--)))
--(((
--NSPH01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
--)))
--
--(((
--To use NSPH01, user needs to check if there is NB-IoT coverage in the installation area and with the bands NSPH01 supports. If the local operator supports it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card** (%%)from local operator and install NSPH01 to get NB-IoT network connection.
--)))
--
--
  [[image:image-20220907153151-1.png]]
@@ -43,6 +43,7 @@
  [[image:M_K`YF9`CAYAE\@}3T]FHT$9.png]]
++
  == 1.2  Features ==
@@ -61,7 +61,6 @@
  * Micro SIM card slot
  * 8500mAh Battery for long term use
--
  == 1.3  Specification ==
@@ -72,14 +72,13 @@
  (% style="color:#037691" %)**NB-IoT Spec:**
--* B1 @H-FDD: 2100MHz
--* B3 @H-FDD: 1800MHz
--* B8 @H-FDD: 900MHz
--* B5 @H-FDD: 850MHz
--* B20 @H-FDD: 800MHz
--* B28 @H-FDD: 700MHz
++* - B1 @H-FDD: 2100MHz
++* - B3 @H-FDD: 1800MHz
++* - B8 @H-FDD: 900MHz
++* - B5 @H-FDD: 850MHz
++* - B20 @H-FDD: 800MHz
++* - B28 @H-FDD: 700MHz
--
  == 1.4  Probe Specification ==
@@ -100,21 +100,20 @@
  * IP68 Protection
  * Length: 3.5 meters
++== 1.5 Applications ==
--== 1.5  Applications ==
--
--
  * Smart Agriculture
++== 1.6 Pin mapping and power on ==
--== 1.6  Pin mapping and power on ==
--
  [[image:image-20220907153300-2.png]]
++
  = 2.  Use NSPH01 to communicate with IoT Server =
++
  == 2.1  How it works ==
@@ -126,8 +126,10 @@
  [[image:image-20220907153416-3.png]]
++
  == 2.2  Configure the NSPH01 ==
++
  === 2.2.1  Test Requirement ===
@@ -137,21 +137,22 @@
  * The local NB-IoT network used the band that NSPH01 supports.
  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
--Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NSPH01 will use** CoAP(120.24.4.116:5683) **or raw **UDP(120.24.4.116:5601)** or **MQTT(120.24.4.116:1883)**or **TCP(120.24.4.116:5600)**protocol to send data to the test server.
++Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NSPH01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
  [[image:image-20220907153445-4.png]]
++
  === 2.2.2  Insert SIM card ===
  User need to take out the NB-IoT module and insert the SIM card like below. ((% style="color:red" %) Pay attention to the direction(%%))
--
  [[image:image-20220907153505-5.png]]
++
  === 2.2.3  Connect USB – TTL to NSPH01 to configure it ===
@@ -174,6 +174,7 @@
  * Stop bits:        (% style="color:green" %)**1**
  * Parity:             (% style="color:green" %)**None**
  * Flow Control: (% style="color:green" %)**None**
++*
  Make sure the switch is in FLASH position, then power on device by connecting the jumper on NSPH01. NSPH01 will output system info once power on as below, we can enter the (% style="color:green" %)**password: 12345678**(%%) to access AT Command input.
@@ -184,6 +184,7 @@
  (% style="color:red" %)**Note: the valid AT Commands can be found at:**(%%)**  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
++
  === 2.2.4  Use CoAP protocol to uplink data ===
@@ -208,6 +208,7 @@
  [[image:image-20220907153612-8.png||height="529" width="729"]]
++
  === 2.2.5  Use UDP protocol to uplink data(Default protocol) ===
@@ -217,6 +217,7 @@
  * (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   **  (%%) ~/~/   to set UDP server address and port
  * (% style="color:blue" %)**AT+CFM=1       **                      (%%)                ~/~/    If the server does not respond, this command is unnecessar
++
  [[image:image-20220907153643-9.png||height="401" width="734"]]
@@ -223,6 +223,7 @@
  [[image:image-20220907153703-10.png||height="309" width="738"]]
++
  === 2.2.6  Use MQTT protocol to uplink data ===
@@ -236,6 +236,7 @@
  * (% style="color:blue" %)**AT+PUBTOPIC=NSE01_PUB                    **(%%)~/~/ Set the sending topic of MQTT
  * (% style="color:blue" %)**AT+SUBTOPIC=NSE01_SUB          **   (%%)       ~/~/ Set the subscription topic of MQTT
++
  [[image:image-20220907153739-11.png||height="491" width="764"]]
@@ -245,6 +245,8 @@
  MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
++
++
  === 2.2.7  Use TCP protocol to uplink data ===
@@ -253,6 +253,7 @@
  * (% style="color:blue" %)**AT+PRO=4   **                        (%%)                   ~/~/ Set to use TCP protocol to uplink
  * (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5600   **  (%%) ~/~/ to set TCP server address and port
++
  [[image:image-20220907153818-13.png||height="486" width="668"]]
@@ -259,6 +259,7 @@
  [[image:image-20220907153827-14.png||height="236" width="684"]]
++
  === 2.2.8  Change Update Interval ===
@@ -266,9 +266,11 @@
  * (% style="color:blue" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (2 hour)
++
  (% style="color:red" %)**NOTE: By default, the device will send an uplink message every 2 hours. Each Uplink Include 8 set of records in this 2 hour (15 minute interval / record).**
++
  == 2.3  Uplink Payload ==
@@ -276,9 +276,9 @@
  Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
--(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
--|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:40px" %)**8**|(% style="width:20px" %)**2**|(% style="width:25px" %)**2**|(% style="width:60px" %)**1**|(% style="width:20px" %)**1**|(% style="width:40px" %)**1**|(% style="width:40px" %)**2**|(% style="width:50px" %)**2**|(% style="width:50px" %)**4**|(% style="width:50px" %)**2**|(% style="width:35px" %)**2**|(% style="width:40px" %)**4**
--|=(% style="width: 96px;" %)**Value**|(% style="width:83px" %)Device ID|(% style="width:44px" %)Ver|(% style="width:42px" %)BAT|(% style="width:124px" %)Signal Strength|(% style="width:57px" %)MOD|(% style="width:80px" %)Interrupt|(% style="width:69px" %)Soil PH|(% style="width:134px" %)Soil Temperature|(% style="width:98px" %)Time stamp|(% style="width:134px" %)Soil Temperature|(% style="width:68px" %)Soil PH|(% style="width:125px" %)Time stamp  .....
++(% border="2" style="background-color:#ffffcc; color:green; width:1160px" %)
++|(% style="width:96px" %)**Size(bytes)**|(% style="width:83px" %)**8**|(% style="width:44px" %)**2**|(% style="width:42px" %)**2**|(% style="width:124px" %)1|(% style="width:57px" %)1|(% style="width:80px" %)1|(% style="width:69px" %)2|(% style="width:134px" %)2|(% style="width:98px" %)4|(% style="width:134px" %)2|(% style="width:68px" %)2|(% style="width:125px" %)4
++|(% style="width:96px" %)**Value**|(% style="width:83px" %)Device ID|(% style="width:44px" %)Ver|(% style="width:42px" %)BAT|(% style="width:124px" %)Signal Strength|(% style="width:57px" %)MOD|(% style="width:80px" %)Interrupt|(% style="width:69px" %)Soil PH|(% style="width:134px" %)Soil Temperature|(% style="width:98px" %)Time stamp|(% style="width:134px" %)Soil Temperature|(% style="width:68px" %)Soil PH|(% style="width:125px" %)Time stamp  .....
  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NSPH01 uplink data.
@@ -285,48 +285,28 @@
  [[image:image-20220907153902-15.png||height="581" width="804"]]
--(((
  The payload is ASCII string, representative same HEX:
--)))
--(((
--
--)))
++0x(% style="color:red" %)f868411056754138(% style="color:blue" %)0064(% style="color:green" %)0c78(% style="color:red" %)17(% style="color:blue" %)01(% style="color:green" %)00(% style="color:red" %)**//0225010b6315537b//**010b0226631550fb//**010e022663154d77**//01110225631549f1//**011502246315466b**//01190223631542e5//**011d022163153f62**//011e022163153bde//**011e022163153859**//(%%) where:
--(((
--**0x (% style="color:red" %)__f868411056754138__  (% style="color:blue" %)__0064 __ (% style="color:green" %)__0c78__  (% style="color:#00b0f0" %)__17__  (% style="color:#7030a0" %)__01__  (% style="color:#d60093" %)__00__  (% style="color:#a14d07" %)__0225 __ (% style="color:#0020b0" %) __010b__  (% style="color:#420042" %)__6315537b__  (% style="color:#663300" %)//__010b0226631550fb__  __010e022663154d77  01110225631549f1  011502246315466b  01190223631542e5  011d022163153f62  011e022163153bde 011e022163153859__//(%%)**
--)))
++* (% style="color:red" %)Device ID: 0xf868411056754138 = f868411056754138
++* (% style="color:blue" %)Version: 0x0064=100=1.0.0
++* (% style="color:green" %)BAT: 0x0c78 = 3192 mV = 3.192V
++* (% style="color:red" %)Singal: 0x17 = 23
++* (% style="color:blue" %)Mod: 0x01 = 1
++* (% style="color:green" %)Interrupt: 0x00= 0
++* Soil PH: 0x0225= 549 = 5.49
++* Soil Temperature: 0x010B =267=26.7 °C
++* Time stamp : 0x6315537b =1662342011  ([[Unix Epoch Time>>url:http://www.epochconverter.com/]])
++* Soil Temperature,Soil PH,Time stamp : 010b0226631550fb
++* (% style="color:red" %)8 sets of recorded data: Temperature,Soil PH,Time stamp : 010e022663154d77,.......
--(((
--
--**where:**
--)))
--* (% style="color:#037691" %)**Device ID:**(%%)** **0xf868411056754138 = f868411056754138
--* (% style="color:#037691" %)**Version:**  (%%)  0x0064=100=1.0.0
--
--* (% style="color:#037691" %)**BAT:**   (%%)  0x0c78 = 3192 mV = 3.192V
--
--* (% style="color:#037691" %)**Singal:** (%%)0x17 = 23
--
--* (% style="color:#037691" %)**Mod:** (%%)  0x01 = 1
--
--* (% style="color:#037691" %)**Interrupt:**(%%) 0x00= 0
--
--* (% style="color:#037691" %)**Soil PH:** (%%)   0x0225= 549 = 5.49
--
--* (% style="color:#037691" %)**Soil Temperature:**(%%) 0x010b =267=26.7 °C
--
--* (% style="color:#037691" %)**Time stamp :**   (%%)     0x6315537b =1662342011  ([[Unix Epoch Time>>url:http://www.epochconverter.com/]])
--
--* (% style="color:#037691" %)**Soil Temperature,Soil PH,Time stamp : **(%%) 010b0226631550fb
--
--* (% style="color:#037691" %)**8 sets of recorded data:**(%%) Temperature,Soil PH,Time stamp :  010e022663154d77,.......
--
  == 2.4  Payload Explanation and Sensor Interface ==
++
  === 2.4.1  Device ID ===
@@ -342,6 +342,7 @@
  The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
++
  === 2.4.2  Version Info ===
@@ -350,6 +350,7 @@
  For example: 0x00 64 : this device is NSPH01 with firmware version 1.0.0.
++
  === 2.4.3  Battery Info ===
@@ -360,6 +360,7 @@
  Ex2: 0x0B49 = 2889mV
++
  === 2.4.4  Signal Strength ===
@@ -378,22 +378,23 @@
  **99**      Not known or not detectable
++
  === 2.4.5  Soil PH ===
  Get the PH content of the soil. The value range of the register is 300-1000(Decimal), divide this value by 100 to get the percentage of PH in the soil.
--For example, if the data you get from the register is (% style="color:blue" %)**__0x05 0xDC__**(%%), the PH content in the soil is
++For example, if the data you get from the register is **__0x05 0xDC__**, the PH content in the soil is
--(% style="color:blue" %)**0229(H) = 549(D) /100 = 5.49.**
++**0229(H) = 549(D) /100 = 5.49.**
++
  === 2.4.6  Soil Temperature ===
--Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is (% style="color:blue" %)**__0x09 0xEC__**(%%), the temperature content in the soil is
++Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is **__0x09 0xEC__**, the temperature content in the soil is
--
  **Example**:
  If payload is 0105H: ((0x0105 & 0x8000)>>15 === 0),temp = 0105(H)/10 = 26.1 °C
@@ -401,6 +401,7 @@
  If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/10 = -12.9 °C
++
  === 2.4.7  Timestamp ===
@@ -409,6 +409,7 @@
  Convert Unix timestamp to time 2022-9-5 9:40:11.
++
  === 2.4.8  Digital Interrupt ===
@@ -420,14 +420,14 @@
  The lower four bits of this data field shows if this packet is generated by interrupt or not. Click here for the hardware and software set up.
++Example:
--**Example:**
--
 x(00): Normal uplink packet.
 x(01): Interrupt Uplink Packet.
++
  === 2.4.9  +5V Output ===
@@ -440,6 +440,7 @@
  Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.** **
++
  == 2.5  Downlink Payload ==
@@ -467,6 +467,7 @@
  Downlink Payload: 06000003, Set AT+INTMOD=3
++
  == 2.6  LED Indicator ==
@@ -477,8 +477,12 @@
  * After NSPH01 join NB-IoT network. The LED will be ON for 3 seconds.
  * For each uplink probe, LED will be on for 500ms.
++
++
++
  == 2.7  Installation and Maintain ==
++
  === 2.7.1  Before measurement ===
@@ -485,10 +485,11 @@
  If the NSPH01 has more than 7 days not use or just clean the pH probe. User should put the probe inside pure water for more than 24 hours for activation. If no put in water, user need to put inside soil for more than 24 hours to ensure the measurement accuracy.
++
  === 2.7.2  Measurement ===
--(% style="color:#037691" %)**Measurement the soil surface:**
++**Measurement the soil surface:**
  [[image:image-20220907154700-18.png]]
@@ -502,7 +502,7 @@
  Put soil over the probe after insert. And start to measure.
--(% style="color:#037691" %)**Measurement inside soil:**
++**Measurement inside soil:**
  Dig a hole with diameter > 20CM.
@@ -509,6 +509,7 @@
  Insert the probe inside, method like measure the surface.
++
  === 2.7.3  Maintain Probe ===
@@ -519,12 +519,15 @@
 . Avoid the probes to touch oily matter. Which will cause issue in accuracy.
 . The probe is IP68 can be put in water.
++
++
++
  == 2.8  PH and Temperature alarm function ==
--(% style="color:#037691" %)**➢ AT Command:**
++**➢ AT Command:**
--(% style="color:blue" %)**AT+ PHALARM=min,max**
++**AT+ PHALARM=min,max**
  ² When min=3, and max≠0, Alarm higher than max
@@ -533,7 +533,7 @@
  ² When min≠0 and max≠0, Alarm higher than max or lower than min
--(% style="color:blue" %)**Example:**
++**Example:**
  AT+ PHALARM =5,8       ~/~/ Alarm when PH lower than 5.
@@ -546,35 +546,36 @@
  ² When min≠0 and max≠0, Alarm higher than max or lower than min
--(% style="color:blue" %)**Example:**
++**Example:**
  AT+ TEMPALARM=20,30     ~/~/ Alarm when temperature lower than 20.
--== 2.9  Set the number of data to be uploaded and the recording time ==
++== 2.9 Set the number of data to be uploaded and the recording time ==
--(% style="color:#037691" %)**➢ AT Command:**
--* (% style="color:blue" %)**AT+TR=900**     (%%)      ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
--* (% style="color:blue" %)**AT+NOUD=8**     (%%)  ~/~/    The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
++**➢ AT Command:**
-- The diagram below explains the relationship between TR, NOUD, and TDC more clearly**:**
++**AT+TR=900**           ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
--[[image:image-20221009000933-1.png||height="750" width="1043"]]
++**AT+NOUD=8**       ~/~/    The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
--== 2.10  Read or Clear cached data ==
++== 2.10 Read or Clear cached data ==
--(% style="color:#037691" %)**➢ AT Command:**
++**➢ AT Command:**
--* (% style="color:blue" %)**AT+CDP**        (%%)  ~/~/  Read cached data
--* (% style="color:blue" %)**AT+CDP=0**    (%%) ~/~/  Clear cached data
++**AT+CDP**          ~/~/  Read cached data
++**AT+CDP=0**    ~/~/ Clear cached data
++
++
  [[image:image-20220907154700-19.png]]
++
  == 2.11  Calibration ==
@@ -586,22 +586,73 @@
  [[image:image-20220907154700-20.png]]
++
  == 2.12  Firmware Change Log ==
--Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1tv07fro2pvjqj8/AAD-2wbfGfluTZfh38fQqdA_a?dl=0>>https://www.dropbox.com/sh/1tv07fro2pvjqj8/AAD-2wbfGfluTZfh38fQqdA_a?dl=0]]
++Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
--Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
++Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
--== 2.13 Battery & Power Consumption ==
++== 2.13  Battery Analysis ==
--NSPH01 uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
--[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
++=== 2.13.1  Battery Type ===
++The NSPH01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
++
++The battery is designed to last for several years depends on the actually use environment and update interval.
++
++The battery-related documents as below:
++
++* [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
++* [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
++* [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
++
++[[image:image-20220907154700-21.png]]
++
++
++
++=== 2.13.2  Power consumption Analyze ===
++
++
++Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
++
++Instruction to use as below:
++
++**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
++
++**Step 2: ** Open it and choose
++
++* Product Model
++* Uplink Interval
++* Working Mode
++
++And the Life expectation in difference case will be shown on the right.
++
++(% style="text-align:center" %)
++[[image:image-20220907154700-22.jpeg]]
++
++
++
++
++=== 2.13.3  Battery Note ===
++
++
++The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
++
++
++
++=== 2.13.4  Replace the battery ===
++
++
++The default battery pack of NSPH01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
++
++
++
  = 3.  Access NB-IoT Module =
@@ -614,8 +614,10 @@
++
  = 4.  Using the AT Commands =
++
  == 4.1  Access AT Commands ==
@@ -630,7 +630,7 @@
  AT+<CMD>=?                  : Get the value
--(% style="color:#037691" %)**General Commands**
++**General Commands**
  AT                            : Attention
@@ -675,17 +675,17 @@
  AT+ PHCAL   : calibrate PH value
--(% style="color:#037691" %)**COAP Management**
++**COAP Management**
  AT+URI            : Resource parameters
--(% style="color:#037691" %)**UDP Management**
++**UDP Management**
  AT+CFM          : Upload confirmation mode (only valid for UDP)
--(% style="color:#037691" %)**MQTT Management**
++**MQTT Management**
  AT+CLIENT               : Get or Set MQTT client
@@ -698,7 +698,7 @@
  AT+SUBTOPIC          : Get or Set MQTT subscription topic
--(% style="color:#037691" %)**Information**
++**Information**
  AT+FDR              : Factory Data Reset
@@ -705,8 +705,10 @@
  AT+PWORD       : Serial Access Password
++
  = 5.  FAQ =
++
  == 5.1  How to Upgrade Firmware ==
@@ -714,9 +714,10 @@
  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
--(% style="color:red" %)**Notice, NSPH01 and LSPH01 share the same mother board. They use the same connection and method to update.**
++**Notice, **NSPH01 **and **LSPH01 **share the same mother board. They use the same connection and method to update.**
++
  == 5.2  Can I calibrate NSPH01 to different soil types? ==
@@ -723,8 +723,10 @@
  NSPH01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
++
  = 6.  Trouble Shooting =
++
  == 6.1  Connection problem when uploading firmware ==
@@ -731,18 +731,14 @@
  **Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
++
  == 6.2  AT Command input doesn't work ==
--In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
++In the case if user can see the console output but can't type input to the device. Please check if you already include the **(% style="color:green" %)ENTER**(%%) while sending out the command. Some serial tool doesn't send **(% style="color:green" %)ENTER** (%%)while press the send key, user need to add ENTER in their string.
--== 6.3  Not able to connect to NB-IoT network and keep showing "Signal Strength:99". ==
--
--This means sensor is trying to join the NB-IoT network but fail. Please see this link for **//[[trouble shooting for signal strenght:99>>doc:Main.CSQ\:99,99.WebHome]]//**.
--
--
  = 7.  Order Info =
@@ -749,6 +749,7 @@
  Part Number**:** NSPH01
++
  = 8.  Packing Info =
@@ -759,12 +759,12 @@
  **Dimension and weight**:
--* Device Size: cm
--* Device Weight: g
--* Package Size / pcs : cm
--* Weight / pcs : g
++* Size: 195 x 125 x 55 mm
++* Weight:   420g
++
++
  = 9.  Support =

image-20220923101327-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Xiaoling

Size

...	...	@@ -1,1 +1,0 @@
1		-12.1 KB

Content

image-20221009000933-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Edwin

Size

...	...	@@ -1,1 +1,0 @@
1		-282.9 KB

Content

Changes for page NSPH01-NB-IoT Soil pH Sensor User Manual

Summary

Details

Applications

Navigation