Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 90.5 >
edited by Xiaoling
on 2022/12/29 15:05
To version < 28.1 >
edited by David Huang
on 2022/10/21 11:19
>
Change comment: Uploaded new attachment "image-20221021111911-26.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,75 +1,36 @@
1 1  (% style="text-align:center" %)
2 -[[image:LMDS200_10.jpg||height="572" width="572"]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png"]]
3 3  
4 4  
5 +**~1. Introduction**
5 5  
7 +**1.1 ​**What is CPN01 **NB-IOT** Pulse/Contact Sensor
6 6  
9 +The Dragino CPL01 is a **NB-IOT Contact Sensor**. It detects open/close status and uplink to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
7 7  
8 -(% style="display:none" %) (%%)
11 +The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
9 9  
13 +CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open for a certain time.
10 10  
15 +CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
11 11  
17 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
18 +\\CPN01 supports different uplink methods include **TCP,MQTT,UDP and CoAP  **for different application requirement.
19 +\\CPN01 is powered by  **8500mAh Li-SOCI2 battery**, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
20 +\\To use CPN01, user needs to check if there is NB-IoT coverage in local area and with the bands CPN01 supports. If the local operate support it, user needs to get a **NB-IoT SIM card** from local operator and install CPN01 to get NB-IoT network connection
12 12  
22 +​
13 13  
14 -**Table of Contents：**
15 15  
16 -{{toc/}}
25 +**​1.2 Features**
17 17  
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25 -
26 -= 1.  Introduction =
27 -
28 -== 1.1 ​ What is NMDS200 NB-IoT Microwave Radar Distance Sensor ==
29 -
30 -
31 -(((
32 -The Dragino NMDS200 is a(% style="color:blue" %)** NB-IoT Microwave Radar distance sensor**(%%). It uses (% style="color:blue" %)**24Ghz Microwave**(%%) to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is (% style="color:blue" %)**more reliable for condensation / dusty environment**(%%). It can sense correct distance even there is water or thick dust on top of the sensor.
33 -)))
34 -
35 -(((
36 -The NMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
37 -)))
38 -
39 -(((
40 -NMDS200 can (% style="color:blue" %)**measure two distances**(%%): the closest object and next object behind the closest one.
41 -)))
42 -
43 -(((
44 -NMDS200 (% style="color:blue" %)**supports Alarm Feature**(%%), user can set the NMDS200 to uplink data in a short interval when the distance is out of configured range.
45 -)))
46 -
47 -(((
48 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
49 -)))
50 -
51 -(((
52 -NMDS200 (% style="color:blue" %)**supports different uplink**(%%) methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
53 -)))
54 -
55 -(((
56 -NMDS200 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**,(%%) It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
57 -)))
58 -
59 -(((
60 -To use NMDS200, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NMDS200 supports. If local operator support it, user needs to get a** (% style="color:blue" %)NB-IoT SIM card(%%)** from the operator and install into NMDS200 to get NB-IoT network connection.
61 -)))
62 -
63 -
64 -== ​1.2  Features ==
65 -
66 -
67 67  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
68 -* Short uplink interval for Distance Alarm
28 +* Open/Close detect
29 +* Open/Close statistics
69 69  * Monitor Battery Level
70 -* Microwave Radar for distance detection
31 +* Uplink on periodically and open/close event
71 71  * Datalog feature
72 -* Uplink periodically
33 +* Uplink on periodically
73 73  * Downlink to change configure
74 74  * Wall Mountable
75 75  * Outdoor Use
... ... @@ -76,532 +76,524 @@
76 76  * Ultra-Low Power consumption
77 77  * AT Commands to change parameters
78 78  * Micro SIM card slot for NB-IoT SIM
79 -* 8500mAh Battery for long-term use
40 +* 8500mAh Battery for long term use
80 80  
42 +**1.3  Specification**
81 81  
44 +**Common DC Characteristics:**
82 82  
83 -== 1.3 Radar probe specification ==
46 +* Supply Voltage: 2.1v ~~ 3.6v
47 +* Operating Temperature: -40 ~~ 85°C
84 84  
49 +**NB-IoT Spec:**
85 85  
86 -* Measuring Method: FMCW
87 -* Frequency: 24.000 ~~ 24.500 GHz
88 -* Measurement output power: 6dBm
89 -* Measure range: 0.5 ~~ 20m
90 -* Accuracy: ±0.1m
91 -* Resolution: 0.01m
92 -* Horizontal Angel: 78°
93 -* Vertical Angel: 23°
51 +* - B1 @H-FDD: 2100MHz
52 +* - B3 @H-FDD: 1800MHz
53 +* - B8 @H-FDD: 900MHz
54 +* - B5 @H-FDD: 850MHz
55 +* - B20 @H-FDD: 800MHz
56 +* - B28 @H-FDD: 700MHz
94 94  
58 +**1.4 Installation**
95 95  
60 +Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
96 96  
97 -== 1.4  Storage Temperature ==
62 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png]] [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image002.png]] ​
98 98  
64 +**1.5 ​Applications**
99 99  
100 - -40°C to +85°C
66 +* Open/Close Detection
67 +* Pulse meter application
68 +* Dry Contact Detection
101 101  
70 +**1.6 Mechanical**
102 102  
103 -== 1.5 ​ Applications ==
72 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image003.png]]
104 104  
74 +**~ 1.7 Pin Definitions and Switch**
105 105  
106 -* Horizontal distance measurement
107 -* Liquid level measurement
108 -* Parking management system
109 -* Object proximity and presence detection
110 -* Intelligent trash can management system
111 -* Robot obstacle avoidance
112 -* Automatic control
113 -* Sewer
114 -* Bottom water level monitoring
76 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image004.png]]
115 115  
78 +**1.7.1 Pin Definition**
116 116  
80 +CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
117 117  
118 -== 1.6  Specification ==
82 +**1.7.2 Jumper JP2(Power ON/OFF)**
119 119  
120 120  
121 -(% style="color:blue" %)**Common DC Characteristics:**
85 +Power on Device when putting this jumper.
122 122  
123 -* Supply Voltage: 2.1v ~~ 3.6v
124 -* Operating Temperature: 0 ~~ 70°C
125 125  
126 -(% style="color:blue" %)**NB-IoT Spec:**
127 127  
128 -* B1 @H-FDD: 2100MHz
129 -* B3 @H-FDD: 1800MHz
130 -* B8 @H-FDD: 900MHz
131 -* B5 @H-FDD: 850MHz
132 -* B20 @H-FDD: 800MHz
133 -* B28 @H-FDD: 700MHz
89 +**1.7.3 BOOT MODE / SW1**
134 134  
135 135  
92 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
136 136  
137 -== 1.7  Installation ==
94 +2) Flash: work mode, the device starts to work and send out console output for further debug
138 138  
139 139  
140 -Sensor measure direction and angle is as below. When install the sensor, please make sure the sensor direct to object.
141 141  
98 +**1.7.4 Reset Button**
142 142  
143 -[[image:image-20221207170748-1.png]]
144 144  
101 +Press to reboot the device.
145 145  
146 - [[image:image-20221207170748-2.png||height="345" width="634"]]
147 147  
148 148  
149 -== 1.8  Pin Definitions and Switch ==
105 +**1.7.5 LED**
150 150  
151 151  
152 -[[image:1670404362039-351.png]]
108 +It will flash:
153 153  
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
154 154  
155 -= 2.  Use NMDS200 to communicate with IoT Server =
156 156  
157 -== 2.1  How it works ==
114 +**2.  Use CPN01 to communicate with IoT Server**
158 158  
116 +**2.1  How it works**
159 159  
160 -The NB-IoT network will forward this value to IoT server via the protocol defined by NMDS200.
118 +The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
161 161  
162 -The diagram below shows the working flow in the default firmware of NMDS200:
120 +The diagram below shows the working flow in default firmware of CPN01:
163 163  
164 -[[image:image-20221021110615-5.png||height="996" width="492"]]
122 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image005.png||alt="说明: image-20220708101605-2.png"]]
165 165  
124 +**2.2 ​ Configure the CPN01**
166 166  
167 -== 2.2 ​ Configure NMDS200 ==
126 +**2.2.1 Test Requirement**
168 168  
128 +To use CPN01 in your city, make sure meet below requirements:
169 169  
170 -To use NMDS200 in your city, make sure to meet below requirements:
171 -
172 -* Your local operator has already distributed an NB-IoT Network.
173 -* The local NB-IoT network used the band that NMDS200 supports.
130 +* Your local operator has already distributed a NB-IoT Network there.
131 +* The local NB-IoT network used the band that CPN01 supports.
174 174  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
175 175  
176 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NMDS200 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
177 177  
178 -[[image:image-20221209090938-1.png]]
136 + ​
179 179  
138 +**2.2.2 Insert SIM card**
180 180  
181 -=== 2.2.1 Insert NB-IoT SIM card ===
182 -
183 -
184 184  Insert the NB-IoT Card get from your provider.
185 185  
186 -User needs to take out the NB-IoT module and insert the SIM card like below:
142 +User need to take out the NB-IoT module and insert the SIM card like below:
187 187  
188 -[[image:image-20221021110745-6.png]] ​
144 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image006.png||alt="说明: 1657249468462-536.png"]] ​
189 189  
146 +**2.2.3 Connect USB – TTL to CPN01 to configure it**
190 190  
191 -=== 2.2.2 Connect USB – TTL to NMDS200 and configure it ===
148 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
192 192  
150 +**Connection:**
193 193  
194 -User need to configure NMDS200 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NMDS200 support AT Commands, user can use a USB to TTL adapter to connect to NMDS200 and use AT Commands to configure it, as below.
152 + USB TTL GND <~-~-~-~-> GND
195 195  
196 -(% style="color:blue" %)**Connection:**
154 + USB TTL TXD <~-~-~-~-> UART_RXD
197 197  
198 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
156 + USB TTL RXD <~-~-~-~-> UART_TXD
199 199  
200 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
201 -
202 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
203 -
204 -
205 205  In the PC, use below serial tool settings:
206 206  
207 -* Baud:  (% style="color:red" %)**9600**
160 +* Baud:  **9600**
161 +* Data bits:** 8**
162 +* Stop bits: **1**
163 +* Parity:  **None**
164 +* Flow Control: **None**
208 208  
209 -* Data bits:** (% style="color:red" %)8(%%)**
166 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
210 210  
211 -* Stop bits: (% style="color:red" %)**1**
168 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image007.png]]
212 212  
213 -* Parity:  (% style="color:red" %)**None**
170 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
214 214  
215 -* Flow Control: (% style="color:red" %)**None**
172 +**2.2.4 Use CoAP protocol to uplink data**
216 216  
217 -Make sure the switch is in FLASH position, then power on NMDS200 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
174 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
218 218  
219 -​[[image:image-20221021110817-7.png]]
176 +**Use below commands:**
220 220  
221 -NMDS200 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
178 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
179 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
180 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
222 222  
223 -
224 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
225 -
226 -
227 -=== 2.2.3 Use CoAP protocol to uplink data ===
228 -
229 -
230 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
231 -
232 -
233 -(% style="color:blue" %)**Use below commands in NMDS200:**
234 -
235 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
236 -
237 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
238 -
239 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
240 -
241 241  For parameter description, please refer to AT command set
242 242  
243 -[[image:1670471530120-960.png||height="647" width="674"]]
184 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image008.png]]
244 244  
186 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
245 245  
246 -After configuring the server address and (% style="color:green" %)**reset NMDS200**(%%) (via AT+ATZ ), NMDS200 will start to uplink sensor values to the CoAP server.
188 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image009.png]] ​
247 247  
248 -[[image:1670405841875-916.png]] ​
190 +**2.2.5 Use UDP protocol to uplink data(Default protocol)**
249 249  
192 +This feature is supported since firmware version v1.0.1
250 250  
251 -=== 2.2.4 Use UDP protocol to uplink data(Default protocol) ===
194 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
195 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
196 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
252 252  
198 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image010.png]]
253 253  
254 -(% style="color:blue" %)**AT Commands:**
200 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image011.png||alt="说明: 1657249930215-289.png"]]
255 255  
256 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
202 +​
257 257  
258 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
204 +**2.2.6 Use MQTT protocol to uplink data**
259 259  
260 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
206 +This feature is supported since firmware version v110
261 261  
262 -​ [[image:1670471559211-638.png]]
208 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
209 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
210 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
211 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
212 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
213 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
214 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
263 263  
216 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image012.png]]
264 264  
265 -[[image:image-20221021111033-11.png||height="241" width="576"]]
218 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image013.png]]
266 266  
267 267  ​
268 268  
269 -=== 2.2.5 Use MQTT protocol to uplink data ===
222 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
270 270  
224 +**2.2.7 Use TCP protocol to uplink data**
271 271  
272 -(% style="color:blue" %)**AT Commands:**
226 +This feature is supported since firmware version v110
273 273  
274 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
228 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
229 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
275 275  
276 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
231 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image014.png]]
277 277  
278 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
233 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image015.png||alt="说明: 1657250255956-604.png"]]
279 279  
280 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
281 -
282 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
283 -
284 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
285 -
286 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
287 -
288 -​ [[image:1670471584490-640.png]]
289 -
290 -
291 -[[image:1670405928926-116.png]]
292 -
293 293  ​
294 294  
295 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
237 +**2.2.8 Change Update Interval**
296 296  
239 +User can use below command to change the **uplink interval**.
297 297  
298 -=== 2.2.6 Use TCP protocol to uplink data ===
241 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
299 299  
243 +**NOTE:**
300 300  
301 -(% style="color:blue" %)**AT Commands:**
245 +**~1. By default, the device will send an uplink message every 1 hour.**
302 302  
303 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
247 +**2.3  Uplink Payload**
304 304  
305 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
249 +In this mode, uplink payload includes 87 bytes in total by default.
306 306  
307 -​ [[image:1670471613823-833.png]]
251 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
308 308  
253 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
254 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
309 309  
310 -[[image:image-20221021111131-15.png]]
311 311  
312 -​
257 +|2|2|4|8 group
258 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
313 313  
314 -=== 2.2.7 Change Update Interval ===
260 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
315 315  
262 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image016.png]]
316 316  
317 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
264 +The payload is ASCII string, representative same HEX:
318 318  
319 -* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (4 hours)
266 +0xf86778705021331700640c7817010001000000090000026315537b 0100000b02000002663510fed0100000e0200000263510f39010000000000000063510e85010000000000000063510d2e010000000000000063510c7a010000000000000063510bc6010000000000000063510954010000000000000063510882 where:
320 320  
321 -(% style="color:red" %)**NOTE:**
268 +* **Device ID: 0x f867787050213317 = f867787050213317**
269 +* **Version: 0x0064=100=1.0.0**
322 322  
323 -1.  By default, the device will send an uplink message every 4 hour.
271 +* **BAT: 0x0c78 = 3192 mV = 3.192V**
272 +* **Singal: 0x17 = 23**
273 +* **Mod: 0x01 = 1**
274 +* **Calculate Flag: 0x00= 0**
275 +* **Contact Status: 0x00= 0**
276 +* **Alarm:0x00 =0**
277 +* **Total pulse:0x09 =0**
278 +* **The last open duration:0x02 =2**
279 +* **Time stamp : 0x6315537b =1662342011**
280 +* **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000b0200002663510fed**
281 +* **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000e0200002663510f39,.......**
324 324  
283 +**2.4  Payload Explanation and Sensor Interface**
325 325  
326 -== 2.3  Uplink Payload ==
285 +**2.4.1  Device ID**
327 327  
287 +By default, the Device ID equal to the last 15 bits of IMEI.
328 328  
329 -The uplink payload includes 23 bytes in total by default.
289 +User can use **AT+DEUI** to set Device ID
330 330  
331 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
291 +**Example:**
332 332  
293 +AT+DEUI=868411056754138
333 333  
334 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:450px" %)
335 -|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:30px" %)**2**|(% style="width:30px" %)**2**|(% style="width:75px" %)**1**|(% style="width:30px" %)**1**|(% style="width:50px" %)**1**|(% style="width:60px" %)**2**|(% style="width:60px" %)**2**
336 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Exit flag|(% style="width:94px" %) [[Distance 1>>||anchor="H2.4.5A0Distance"]] |(% style="width:93px" %) [[Distance 2>>||anchor="H2.4.5A0Distance"]]
295 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
337 337  
338 -(% border="1" style="background-color:#ffffcc; color:green; width:429px" %)
339 -|(% style="width:60px" %)**4**|(% style="width:60px" %)**2**|(% style="width:60px" %)**2**|(% style="width:60px" %)**4**|(% style="width:100px" %)(((
340 -**1-32 group**
341 -)))
342 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.6A0Timestamp"]]| Distance 1 | Distance  2|(% style="width:67px" %)Time stamp|(% style="width:100px" %)...
297 +**2.4.2  Version Info**
343 343  
344 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NMDS200 uplink data.
299 +Specify the software version: 0x64=100, means firmware version 1.00.
345 345  
346 -[[image:1670406261143-723.png]]
301 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
347 347  
303 +**2.4.3  Battery Info**
348 348  
349 -The payload is ASCII string, representative same HEX: **0x (% style="color:red" %)__f867787050471071__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0cc3__(% style="color:#00b0f0" %) 0__9__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00ef__(% style="color:#660066" %) (% style="color:#663300" %)__013d__ (% style="color:#d60093" %)__6390453d__(%%)**
305 +Check the battery voltage for CPN01.
350 350  
351 -**where:**
307 +Ex1: 0x0B45 = 2885mV
352 352  
353 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050471071 = f867787050471071
309 +Ex2: 0x0B49 = 2889mV
354 354  
355 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
311 +**2.4.4  Signal Strength**
356 356  
357 -* (% style="color:#037691" %)**BAT :**(%%)  0x0cc3 = 3267 mV = 3.267V
313 +NB-IoT Network signal Strength.
358 358  
359 -* (% style="color:#037691" %)**Singal: **(%%)0x09 = 9
315 +**Ex1: 0x1d = 29**
360 360  
361 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
317 +**0**  -113dBm or less
362 362  
363 -* (% style="color:#037691" %)**Exit flag: **(%%)0x00 =0
319 +**1**  -111dBm
364 364  
365 -* (% style="color:#037691" %)**Distance 1: **(%%)0x00ef=239
321 +**2...30** -109dBm... -53dBm
366 366  
367 -* (% style="color:#037691" %)**Distance 2: **(%%)0x013d =317
323 +**31**   -51dBm or greater
368 368  
369 -* (% style="color:#037691" %)**Timestamp: **(%%)0x6390453d =1670399293 (Unix Time)
325 +**99**    Not known or not detectable
370 370  
327 +**2.4.5 Calculate Flag**
371 371  
372 -== 2.4  Payload Explanation and Sensor Interface ==
329 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
373 373  
374 -=== 2.4.1  Device ID ===
331 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
375 375  
333 +Default value: 0. 
376 376  
377 -By default, the Device ID is equal to the last 15 bits of IMEI.
335 +Range (6 bits): (b)000000 ~~ (b) 111111
378 378  
379 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
337 +**2.4.6  Alarm**
380 380  
381 -**Example:**
339 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
382 382  
383 -AT+DEUI=868411056754138
341 +**2.4.7 Contact Status**
384 384  
385 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
343 +0: Open
386 386  
345 +1: Close
387 387  
388 -=== 2.4.2  Version Info ===
347 +**2.4.8 Total pulse**
389 389  
349 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
390 390  
391 -Specify the software version: 0x64=100, which means firmware version 1.00.
351 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
392 392  
393 -For example 0x00 64 : This device is NMDS200 with firmware version 1.0.0.
353 +**2.4.9 The last open duration**
394 394  
355 +Dry Contact last open duration.
395 395  
396 -=== 2.4.3  Battery Info ===
357 +Unit: min.
397 397  
359 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image017.png]]
398 398  
399 -Check the battery voltage for NMDS200.
400 400  
401 -Ex1: 0x0B45 = 2885mV
362 +**2.4.10  Timestamp**
402 402  
403 -Ex2: 0x0B49 = 2889mV
364 +Time stamp : 0x6315537b =1662342011
404 404  
366 +Convert Unix timestamp to time 2022-9-5 9:40:11.
405 405  
406 -=== 2.4.4  Signal Strength ===
368 +**~ **
407 407  
370 +**2.5  Downlink Payload**
408 408  
409 -NB-IoT Network signal Strength.
372 +By default, CPN01 prints the downlink payload to console port.
410 410  
411 -(% style="color:blue" %)**Ex1: 0x1d = 29**
374 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image018.png||alt="说明: image-20220708133731-5.png"]] ​
412 412  
413 -(% style="color:#037691" %)**0** (%%) -113dBm or less
376 +**Examples:**
414 414  
415 -(% style="color:#037691" %)**1**  (%%) -111dBm
378 +* **Set TDC**
416 416  
417 -(% style="color:#037691" %)**2...30** (%%) -109dBm... -53dBm
380 +If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
418 418  
419 -(% style="color:#037691" %)**31** (%%) -51dBm or greater
382 +Payload:    01 00 00 1E    TDC=30S
420 420  
421 -(% style="color:#037691" %)**99** (%%) Not known or not detectable
384 +Payload:    01 00 00 3C    TDC=60S
422 422  
386 +* **Reset**
423 423  
424 -=== 2.4.5  Distance ===
388 +If payload = 0x04FF, it will reset the NSE01
425 425  
390 +* **INTMOD**
426 426  
427 -[[image:1670407401682-959.png]]
392 +Downlink Payload: 06000003, Set AT+INTMOD=3
428 428  
394 +**2.6  ​LED Indicator**
429 429  
430 -(% style="color:blue" %)**Object1 Distance:**
396 +The CPN01 has an internal LED which is to show the status of different state.
431 431  
432 -Distance between sensor probe to the first object. (unit: cm)
398 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
399 +* Then the LED will be on for 1 second means device is boot normally.
400 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
401 +* For each uplink probe, LED will be on for 500ms.
433 433  
434 -For example, if the data you get from the register is 0x02 0x05, the distance between the sensor and the measured object is
403 +**2.7 ** Alarm Base on Timeout
435 435  
436 -(% style="color:blue" %)**0205(H) = 517 (D) = 517 cm.**
405 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
437 437  
438 438  
439 -(% style="color:blue" %)**Object2 Distance:**
408 +**~1. Keep Status: Status to be monitor**
440 440  
441 -Distance between sensor probe to the second object. (unit: cm)
410 +Keep Status = 1: Monitor Close to Open event
442 442  
412 +Keep Status = 0: Monitor Open to Close event
443 443  
444 -=== 2.4.6  Timestamp ===
445 445  
415 +**2. Keep Time: Timeout to send an Alarm**
446 446  
447 -Timestamp : 0x6315537b =1662342011
417 +Range 0 ~~ 65535(0xFFFF) seconds.
448 448  
419 +If keep time = 0, Disable Alarm Base on Timeout feature.
449 449  
450 -== 2.5  Downlink Payload ==
421 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
451 451  
452 452  
453 -By default, NMDS200 prints the downlink payload to console port.
424 +**AT Command** to configure:
454 454  
455 -[[image:image-20221021111414-18.png]] ​
426 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
456 456  
428 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
457 457  
458 -**Examples:**
430 +**2.8** Set debug mode
459 459  
460 -* (% style="color:#037691" %)**Set TDC**
432 +Feature: Enable or Disable debug mode
461 461  
462 -If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
463 463  
464 -Payload:    01 00 00 1E    TDC=30S
435 +**AT Command: AT+DEBUG**
465 465  
466 -Payload:    01 00 00 3C    TDC=60S
437 +|**Command Example**|**Function**|**Response**
438 +|AT+DEBUG =0|Disable debug mode to 0|OK
439 +|AT+ DEBUG =1|Enable debug mode to 1|OK
467 467  
468 -* (% style="color:#037691" %)**Reset**
441 +== 2.9 Clear Flash Record ==
469 469  
470 -If payload = 0x04FF, it will reset the NMDS200
443 +Feature: Clear flash storage for data log feature.
471 471  
472 -* (% style="color:#037691" %)**INTMOD**
445 +**AT Command: AT+CLRDTA**
473 473  
474 -Downlink Payload: 06000003, Set AT+INTMOD=3
447 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image019.png||alt="说明: image-20220609151132-7.png"]]
475 475  
449 +**~ 2.10 **Set trigger mode
476 476  
477 -== 2.6  ​LED Indicator ==
451 +➢ AT Command: **AT+TTRMOD**
478 478  
453 +Feature: Set the trigger interrupt mode.
479 479  
480 -The NMDS200 has an internal LED which is to show the status of different states.
455 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image020.png||alt="说明: image-20220609151344-9.png"]]
481 481  
482 -* When the device starts normally, the LED will light up for 1 second.
483 -* After NMDS200 join NB-IoT network. The LED will be ON for 3 seconds.
484 -* For each uplink probe, LED will be on for 500ms.
457 +**2.11** Set the calculate flag
485 485  
459 +Feature: Set the calculate flag
486 486  
461 +**AT Command: AT+CALCFLAG**
487 487  
488 -== 2.7  Distance alarm function ==
463 +|**Command Example**|**Function**|**Response**
464 +|AT+CALCFLAG =1|Set the calculate flag to 1.|OK
465 +|AT+CALCFLAG =2|Set the calculate flag to 2.|OK
489 489  
467 +**2.12** Set count number
490 490  
491 -(% style="color:blue" %)**AT Command: AT+ALARM1=min,max**
469 +Feature: Manually set the count number
492 492  
493 -(% style="color:#037691" %)**Example 1:**
471 +**AT Command: AT+SETCNT**
494 494  
495 -AT+ ALARM1 =60,200  ~/~/ Alarm when distance1 lower than 60.
473 +|**Command Example**|**Function**|**Response**
474 +|AT+ SETCNT =0|Set the count number to 0.|OK
475 +|AT+ SETCNT =100|Set the count number to 100.|OK
496 496  
497 -AT+ ALARM2 =min,max
498 498  
478 +**2.13 Set the number of data to be uploaded and the recording time**
499 499  
500 -(% style="color:#037691" %)**Example 2:**
480 +➢ AT Command:
501 501  
502 -AT+ ALARM2 =200,1500  ~/~/ Alarm when distance2 lower than 1500.
482 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
503 503  
504 504  
505 -== 2.8  Set the number of data to be uploaded and the recording time ==
485 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
506 506  
487 +**2.14 Read or Clear cached data**
507 507  
508 -(% style="color:blue" %)**AT Command:**
489 +➢ AT Command:
509 509  
510 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
491 +AT+CDP    ~/~/ Read cached data
511 511  
512 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
493 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image021.png]]
513 513  
514 514  
515 -== 2.9  Read or Clear cached data ==
496 +AT+CDP=0    ~/~/ Clear cached data ​
516 516  
498 +**2.15  ​Firmware Change Log**
517 517  
518 -(% style="color:blue" %)**AT Command:**
500 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
519 519  
520 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
502 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
521 521  
522 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
504 +**2.16  ​Battery Analysis**
523 523  
524 -[[image:1670408172929-569.png]]
506 +**2.16.1  ​Battery Type**
525 525  
508 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
526 526  
527 -== 2.10  ​Firmware Change Log ==
510 +The battery is designed to last for several years depends on the actually use environment and update interval. 
528 528  
512 +The battery related documents as below:
529 529  
530 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/8elvp2qi9bcv47a/AAAKp0E2nUffztF0tYhqPoE1a?dl=0>>https://www.dropbox.com/sh/8elvp2qi9bcv47a/AAAKp0E2nUffztF0tYhqPoE1a?dl=0]]
531 -
532 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
533 -
534 -
535 -== 2.11  ​Battery Analysis ==
536 -
537 -=== 2.11.1  ​Battery Type ===
538 -
539 -
540 -The NMDS200 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
541 -
542 -The battery is designed to last for several years depends on the actual use environment and update interval. 
543 -
544 -The battery-related documents as below:
545 -
546 546  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
547 -
548 548  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
549 -
550 550  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
551 551  
552 -[[image:image-20221021111911-26.png]] ​
518 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image022.png||alt="说明: image-20220708140453-6.png"]] ​
553 553  
520 +**2.16.2  Power consumption Analyze**
554 554  
555 -=== 2.11.2  Power consumption Analyze ===
556 -
557 -
558 558  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
559 559  
560 560  Instruction to use as below:
561 561  
562 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
526 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
563 563  
564 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
528 +**Step 2: ** Open it and choose
565 565  
566 566  * Product Model
567 -
568 568  * Uplink Interval
569 -
570 570  * Working Mode
571 571  
572 572  And the Life expectation in difference case will be shown on the right.
573 573  
574 -[[image:1666596205057-567.png]] ​
536 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image023.jpg||alt="说明: image-20220708141352-7.jpeg"]] ​
575 575  
538 +**2.16.3  ​Battery Note**
576 576  
577 -=== 2.11.3  ​Battery Note ===
578 -
579 -
580 580  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
581 581  
542 +**2.16.4  Replace the battery**
582 582  
583 -=== 2.11.4  Replace the battery ===
544 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
584 584  
546 +**3. ​ Access NB-IoT Module**
585 585  
586 -The default battery pack of NMDS200 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
587 -
588 -
589 -= 3. ​ Access NB-IoT Module =
590 -
591 -
592 592  Users can directly access the AT command set of the NB-IoT module.
593 593  
594 594  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
595 595  
552 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image024.png||alt="说明: 1657261278785-153.png"]] ​
596 596  
597 -[[image:image-20221118094449-6.png]] ​
554 +**4.  Using the AT Commands**
598 598  
556 +**4.1  Access AT Commands**
599 599  
600 -= 4.  Using the AT Commands =
601 -
602 -== 4.1  Access AT Commands ==
603 -
604 -
605 605  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
606 606  
607 607  AT+<CMD>?  : Help on <CMD>
... ... @@ -612,9 +612,8 @@
612 612  
613 613  AT+<CMD>=?  : Get the value
614 614  
568 +**General Commands**      
615 615  
616 -(% style="color:blue" %)**General Commands**      
617 -
618 618  AT  : Attention       
619 619  
620 620  AT?  : Short Help     
... ... @@ -629,107 +629,133 @@
629 629  
630 630  AT+INTMOD            : Set the trigger interrupt mode
631 631  
632 -AT+5VT  : Set extend the time of 5V power  
584 +AT+5VT  : Set extend the time of 5V power  
633 633  
634 -AT+PRO  : Choose agreement
586 +AT+PRO  : Choose agreement
635 635  
636 -AT+RXDL  : Extend the sending and receiving time
588 +AT+RXDL  : Extend the sending and receiving time
637 637  
638 -AT+SERVADDR  : Server Address
590 +AT+SERVADDR  : Server Address
639 639  
640 -AT+TR      :  Get or Set record time
592 +AT+TR      : Get or Set record time"
641 641  
642 -AT+NOUD :  Get or Set the number of data to be uploaded
643 643  
644 -AT+CDP     :  Read or Clear cached data
595 +AT+NOUD      : Get or Set the number of data to be uploaded
645 645  
646 -AT+DEBUG:  Enable or Disable debug mode
647 647  
648 -AT+ALARM1:  Get or Set alarm of distance1
598 +AT+CDP     : Read or Clear cached data
649 649  
650 -AT+ALARM2:  Get or Set alarm of distance2
651 651  
652 -AT+GETSENSORVALUE :  Returns the current sensor measurement
601 +AT+ DEBUG   : Enable or Disable debug mode
653 653  
654 -AT+POWERIC :  Get or set the Power IC flag
603 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
655 655  
605 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
656 656  
657 -(% style="color:blue" %)**COAP Management**      
607 +AT+ CALCFLAG   : Get or Set the calculate flag
658 658  
659 -AT+URI :  Resource parameters
609 +AT+ CLRC   : Clear current door open count
660 660  
611 +**COAP Management**      
661 661  
662 -(% style="color:blue" %)**UDP Management**
613 +AT+URI            : Resource parameters
663 663  
664 -AT+CFM :  Upload confirmation mode (only valid for UDP)
615 +**UDP Management**
665 665  
617 +AT+CFM          : Upload confirmation mode (only valid for UDP)
666 666  
667 -(% style="color:blue" %)**MQTT Management**
619 +**MQTT Management**
668 668  
669 -AT+CLIENT  : Get or Set MQTT client
621 +AT+CLIENT               : Get or Set MQTT client
670 670  
671 -AT+UNAME : Get or Set MQTT Username
623 +AT+UNAME  : Get or Set MQTT Username
672 672  
673 -AT+PWD  :  Get or Set MQTT password
625 +AT+PWD                  : Get or Set MQTT password
674 674  
675 -AT+PUBTOPIC :  Get or Set MQTT publish topic
627 +AT+PUBTOPIC  : Get or Set MQTT publish topic
676 676  
677 -AT+SUBTOPIC :  Get or Set MQTT subscription topic
629 +AT+SUBTOPIC  : Get or Set MQTT subscription topic
678 678  
631 +**Information**          
679 679  
680 -(% style="color:blue" %)**Information**          
633 +AT+FDR  : Factory Data Reset
681 681  
682 -AT+FDR :  Factory Data Reset
635 +AT+PWORD  : Serial Access Password
683 683  
684 -AT+PWORD :  Serial Access Password
637 +**​5.  FAQ**
685 685  
639 +**5.1 ​ How to Upgrade Firmware**
686 686  
687 -= ​5.  FAQ =
641 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
688 688  
689 -== 5.1 ​ How to Upgrade Firmware ==
643 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
690 690  
645 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
691 691  
692 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
647 +**5.2  Can I calibrate CPN01 to different soil types?**
693 693  
694 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
649 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
695 695  
696 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NMDS200** (%%)**and (% style="color:blue" %)LMDS200(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
651 +**6.  Trouble Shooting**
697 697  
653 +**6.1  ​Connection problem when uploading firmware**
698 698  
699 -= 6.  Trouble Shooting =
655 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
700 700  
701 -== 6.1  ​Connection problem when uploading firmware ==
657 +**6.2  AT Command input doesn't work**
702 702  
659 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
703 703  
704 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
661 +**7. ​ Order Info**
705 705  
663 +Part Number**:** CPN01
706 706  
707 -== 6.2  AT Command input doesn't work ==
665 +**8.  Packing Info**
708 708  
667 +**Package Includes**:
709 709  
710 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
669 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
670 +* External antenna x 1
711 711  
672 +**Dimension and weight**:
712 712  
713 -= 7. ​ Order Info =
674 +* Size: 195 x 125 x 55 mm
675 +* Weight:   420g
714 714  
677 +**9.  Support**
715 715  
716 -Part Number:(% style="color:blue" %)** NMDS200**
679 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
680 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
717 717  
682 +​
718 718  
719 -= 8.  Packing Info =
720 720  
721 721  
722 -(% style="color:blue" %)**Package Includes**:
723 723  
724 -* NMDS200 NB-IoT Microwave Radar Distance Sensor x 1
725 725  
726 726  
727 727  
728 -= 9.  Support =
729 729  
730 730  
731 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
732 732  
733 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
734 734  
735 -​
694 +
695 +
696 +
697 +
698 +
699 +
700 +
701 +
702 +
703 +
704 +
705 +
706 +
707 +
708 +
709 +
710 +
711 +
712 +
713 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
1670404362039-351.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -492.6 KB
Content
1670405841875-916.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.1 KB
Content
1670405928926-116.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.7 KB
Content
1670406036256-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -181.0 KB
Content
1670406261143-723.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.9 KB
Content
1670407401682-959.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -23.7 KB
Content
1670408172929-569.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -211.8 KB
Content
1670471530120-960.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -67.6 KB
Content
1670471559211-638.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -170.6 KB
Content
1670471584490-640.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -91.1 KB
Content
1670471613823-833.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -181.0 KB
Content
LMDS200_10.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
image-20221021111923-27.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -130.6 KB
Content
image-20221021112006-28.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content
image-20221207170748-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -26.1 KB
Content
image-20221207170748-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.9 KB
Content
image-20221207173200-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.7 KB
Content
image-20221207173300-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.0 KB
Content
image-20221208090742-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.7 KB
Content
image-20221209090938-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -121.9 KB
Content
image-20221212171610-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -756.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0