Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 83.4 >
edited by Xiaoling
on 2022/12/08 09:47
To version < 28.1 >
edited by David Huang
on 2022/10/21 11:19
>
Change comment: Uploaded new attachment "image-20221021111911-26.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,46 +1,36 @@
1 1  (% style="text-align:center" %)
2 -[[image:LMDS200_10.jpg]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png"]]
3 3  
4 4  
5 -**Table of Contents：**
5 +**~1. Introduction**
6 6  
7 +**1.1 ​**What is CPN01 **NB-IOT** Pulse/Contact Sensor
7 7  
9 +The Dragino CPL01 is a **NB-IOT Contact Sensor**. It detects open/close status and uplink to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
8 8  
11 +The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
9 9  
13 +CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open for a certain time.
10 10  
11 -= 1.  Introduction =
15 +CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
12 12  
13 -== 1.1 ​ What is NMDS200 NB-IoT Microwave Radar Distance Sensor ==
17 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
18 +\\CPN01 supports different uplink methods include **TCP,MQTT,UDP and CoAP  **for different application requirement.
19 +\\CPN01 is powered by  **8500mAh Li-SOCI2 battery**, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
20 +\\To use CPN01, user needs to check if there is NB-IoT coverage in local area and with the bands CPN01 supports. If the local operate support it, user needs to get a **NB-IoT SIM card** from local operator and install CPN01 to get NB-IoT network connection
14 14  
22 +​
15 15  
16 -(((
17 -The Dragino NMDS200 is a(% style="color:blue" %)** NB-IoT Microwave Radar distance sensor**(%%). It uses (% style="color:blue" %)**24Ghz Microwave**(%%) to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is (% style="color:blue" %)**more reliable for condensation / dusty environment**(%%). It can sense correct distance even there is water or thick dust on top of the sensor.
18 18  
19 -The NMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
25 +**​1.2 Features**
20 20  
21 -NMDS200 can (% style="color:blue" %)**measure two distances**(%%): the closest object and next object behind the closest one.
22 -
23 -NMDS200 (% style="color:blue" %)**supports Alarm Feature**(%%), user can set the NMDS200 to uplink data in a short interval when the distance is out of configured range.
24 -
25 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
26 -
27 -NMDS200 (% style="color:blue" %)**supports different uplink**(%%) methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
28 -
29 -NMDS200 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**,(%%) It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
30 -
31 -To use NMDS200, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NMDS200 supports. If local operator support it, user needs to get a** (% style="color:blue" %)NB-IoT SIM card(%%)** from the operator and install into NMDS200 to get NB-IoT network connection.
32 -)))
33 -
34 -
35 -== ​1.2  Features ==
36 -
37 -
38 38  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
39 -* Short uplink interval for Distance Alarm
28 +* Open/Close detect
29 +* Open/Close statistics
40 40  * Monitor Battery Level
41 -* Microwave Radar for distance detection
31 +* Uplink on periodically and open/close event
42 42  * Datalog feature
43 -* Uplink periodically
33 +* Uplink on periodically
44 44  * Downlink to change configure
45 45  * Wall Mountable
46 46  * Outdoor Use
... ... @@ -47,528 +47,524 @@
47 47  * Ultra-Low Power consumption
48 48  * AT Commands to change parameters
49 49  * Micro SIM card slot for NB-IoT SIM
50 -* 8500mAh Battery for long-term use
40 +* 8500mAh Battery for long term use
51 51  
52 -== 1.3 Radar probe specification ==
42 +**1.3  Specification**
53 53  
44 +**Common DC Characteristics:**
54 54  
55 -* Measuring Method: FMCW
56 -* Frequency: 24.000 24.500 GHz
57 -* Measurement output power: 6dBm
58 -* Measure range: 0.5 20m
59 -* Accuracy: ±0.1m
60 -* Resolution: 0.01m
61 -* Horizontal Angel: 78°
62 -* Vertical Angel: 23°
46 +* Supply Voltage: 2.1v ~~ 3.6v
47 +* Operating Temperature: -40 ~~ 85°C
63 63  
64 -== 1.4  Storage Temperature ==
49 +**NB-IoT Spec:**
65 65  
51 +* - B1 @H-FDD: 2100MHz
52 +* - B3 @H-FDD: 1800MHz
53 +* - B8 @H-FDD: 900MHz
54 +* - B5 @H-FDD: 850MHz
55 +* - B20 @H-FDD: 800MHz
56 +* - B28 @H-FDD: 700MHz
66 66  
67 - -40°C to +85°C
58 +**1.4 Installation**
68 68  
60 +Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
69 69  
70 -== 1.5 ​ Applications ==
62 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png]] [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image002.png]] ​
71 71  
64 +**1.5 ​Applications**
72 72  
73 -* Horizontal distance measurement
74 -* Liquid level measurement
75 -* Parking management system
76 -* Object proximity and presence detection
77 -* Intelligent trash can management system
78 -* Robot obstacle avoidance
79 -* Automatic control
80 -* Sewer
81 -* Bottom water level monitoring
66 +* Open/Close Detection
67 +* Pulse meter application
68 +* Dry Contact Detection
82 82  
83 -== 1.6  Specification ==
70 +**1.6 Mechanical**
84 84  
72 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image003.png]]
85 85  
86 -(% style="color:blue" %)**Common DC Characteristics:**
74 +**~ 1.7 Pin Definitions and Switch**
87 87  
88 -* Supply Voltage: 2.1v ~~ 3.6v
89 -* Operating Temperature: 0 ~~ 70°C
76 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image004.png]]
90 90  
91 -(% style="color:blue" %)**NB-IoT Spec:**
78 +**1.7.1 Pin Definition**
92 92  
93 -* B1 @H-FDD: 2100MHz
94 -* B3 @H-FDD: 1800MHz
95 -* B8 @H-FDD: 900MHz
96 -* B5 @H-FDD: 850MHz
97 -* B20 @H-FDD: 800MHz
98 -* B28 @H-FDD: 700MHz
80 +CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
99 99  
100 -== 1.7  Installation ==
82 +**1.7.2 Jumper JP2(Power ON/OFF)**
101 101  
102 102  
103 -Sensor measure direction and angle is as below. When install the sensor, please make sure the sensor direct to object.
85 +Power on Device when putting this jumper.
104 104  
105 105  
106 -[[image:image-20221207170748-1.png]] [[image:image-20221207170748-2.png||height="366" width="672"]]
107 107  
89 +**1.7.3 BOOT MODE / SW1**
108 108  
109 109  
110 -== 1.8  Pin Definitions and Switch ==
92 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
111 111  
94 +2) Flash: work mode, the device starts to work and send out console output for further debug
112 112  
113 -[[image:1670404362039-351.png]]
114 114  
115 115  
116 -= 2.  Use NMDS200 to communicate with IoT Server =
98 +**1.7.4 Reset Button**
117 117  
118 -== 2.1  How it works ==
119 119  
101 +Press to reboot the device.
120 120  
121 -The NB-IoT network will forward this value to IoT server via the protocol defined by NMDS200.
122 122  
123 -The diagram below shows the working flow in the default firmware of NMDS200:
124 124  
125 -[[image:image-20221021110615-5.png]]
105 +**1.7.5 LED**
126 126  
127 127  
128 -== 2.2 ​ Configure NMDS200 ==
108 +It will flash:
129 129  
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
130 130  
131 -To use NMDS200 in your city, make sure to meet below requirements:
132 132  
133 -* Your local operator has already distributed an NB-IoT Network.
134 -* The local NB-IoT network used the band that NMDS200 supports.
135 -* Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
114 +**2.  Use CPN01 to communicate with IoT Server**
136 136  
137 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NMDS200 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
116 +**2.1  How it works**
138 138  
139 -[[image:image-20221208090742-1.png]]
118 +The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
140 140  
120 +The diagram below shows the working flow in default firmware of CPN01:
141 141  
142 -=== 2.2.1 Insert NB-IoT SIM card ===
122 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image005.png||alt="说明: image-20220708101605-2.png"]]
143 143  
124 +**2.2 ​ Configure the CPN01**
144 144  
145 -Insert the NB-IoT Card get from your provider.
126 +**2.2.1 Test Requirement**
146 146  
147 -User needs to take out the NB-IoT module and insert the SIM card like below:
128 +To use CPN01 in your city, make sure meet below requirements:
148 148  
149 -[[image:image-20221021110745-6.png]] ​
130 +* Your local operator has already distributed a NB-IoT Network there.
131 +* The local NB-IoT network used the band that CPN01 supports.
132 +* Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
150 150  
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
151 151  
152 -=== 2.2.2 Connect USB – TTL to NMDS200 and configure it ===
136 + ​
153 153  
138 +**2.2.2 Insert SIM card**
154 154  
155 -User need to configure NMDS200 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NMDS200 support AT Commands, user can use a USB to TTL adapter to connect to NMDS200 and use AT Commands to configure it, as below.
140 +Insert the NB-IoT Card get from your provider.
156 156  
157 -(% style="color:blue" %)**Connection:**
142 +User need to take out the NB-IoT module and insert the SIM card like below:
158 158  
159 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
144 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image006.png||alt="说明: 1657249468462-536.png"]] ​
160 160  
161 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
146 +**2.2.3 Connect USB – TTL to CPN01 to configure it**
162 162  
163 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
148 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
164 164  
150 +**Connection:**
165 165  
166 -In the PC, use below serial tool settings:
152 + USB TTL GND <~-~-~-~-> GND
167 167  
168 -* Baud:  (% style="color:red" %)**9600**
154 + USB TTL TXD <~-~-~-~-> UART_RXD
169 169  
170 -* Data bits:** (% style="color:red" %)8(%%)**
156 + USB TTL RXD <~-~-~-~-> UART_TXD
171 171  
172 -* Stop bits: (% style="color:red" %)**1**
158 +In the PC, use below serial tool settings:
173 173  
174 -* Parity:  (% style="color:red" %)**None**
160 +* Baud:  **9600**
161 +* Data bits:** 8**
162 +* Stop bits: **1**
163 +* Parity:  **None**
164 +* Flow Control: **None**
175 175  
176 -* Flow Control: (% style="color:red" %)**None**
166 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
177 177  
178 -Make sure the switch is in FLASH position, then power on NMDS200 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
168 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image007.png]]
179 179  
180 -​[[image:image-20221021110817-7.png]]
170 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
181 181  
182 -NMDS200 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
172 +**2.2.4 Use CoAP protocol to uplink data**
183 183  
174 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
184 184  
185 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 +**Use below commands:**
186 186  
178 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
179 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
180 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
187 187  
188 -
189 -=== 2.2.3 Use CoAP protocol to uplink data ===
190 -
191 -
192 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
193 -
194 -
195 -(% style="color:blue" %)**Use below commands in NMDS200:**
196 -
197 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
198 -
199 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
200 -
201 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
202 -
203 203  For parameter description, please refer to AT command set
204 204  
205 -[[image:image-20221021110948-8.png]]
184 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image008.png]]
206 206  
186 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
207 207  
208 -After configuring the server address and (% style="color:green" %)**reset NMDS200**(%%) (via AT+ATZ ), NMDS200 will start to uplink sensor values to the CoAP server.
188 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image009.png]] ​
209 209  
210 -[[image:1670405841875-916.png]] ​
190 +**2.2.5 Use UDP protocol to uplink data(Default protocol)**
211 211  
192 +This feature is supported since firmware version v1.0.1
212 212  
213 -=== 2.2.4 Use UDP protocol to uplink data(Default protocol) ===
194 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
195 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
196 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
214 214  
198 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image010.png]]
215 215  
216 -(% style="color:blue" %)**AT Commands:**
200 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image011.png||alt="说明: 1657249930215-289.png"]]
217 217  
218 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
219 -
220 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
221 -
222 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
223 -
224 -​ [[image:image-20221021111025-10.png]]
225 -
226 -
227 -[[image:image-20221021111033-11.png||height="241" width="576"]]
228 -
229 229  ​
230 230  
231 -=== 2.2.5 Use MQTT protocol to uplink data ===
204 +**2.2.6 Use MQTT protocol to uplink data**
232 232  
206 +This feature is supported since firmware version v110
233 233  
234 -(% style="color:blue" %)**AT Commands:**
208 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
209 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
210 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
211 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
212 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
213 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
214 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
235 235  
236 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
216 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image012.png]]
237 237  
238 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
218 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image013.png]]
239 239  
240 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
241 -
242 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
243 -
244 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
245 -
246 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
247 -
248 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
249 -
250 -​ [[image:image-20221118103445-7.png]]
251 -
252 -
253 -[[image:1670405928926-116.png]]
254 -
255 255  ​
256 256  
257 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
222 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
258 258  
224 +**2.2.7 Use TCP protocol to uplink data**
259 259  
260 -=== 2.2.6 Use TCP protocol to uplink data ===
226 +This feature is supported since firmware version v110
261 261  
228 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
229 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
262 262  
263 -(% style="color:blue" %)**AT Commands:**
231 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image014.png]]
264 264  
265 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
233 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image015.png||alt="说明: 1657250255956-604.png"]]
266 266  
267 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
268 -
269 -​ [[image:1670406036256-101.png||height="676" width="713"]]
270 -
271 -
272 -[[image:image-20221021111131-15.png]]
273 -
274 274  ​
275 275  
276 -=== 2.2.7 Change Update Interval ===
237 +**2.2.8 Change Update Interval**
277 277  
239 +User can use below command to change the **uplink interval**.
278 278  
279 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
241 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
280 280  
281 -* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (4 hours)
243 +**NOTE:**
282 282  
283 -(% style="color:red" %)**NOTE:**
245 +**~1. By default, the device will send an uplink message every 1 hour.**
284 284  
285 -1.  By default, the device will send an uplink message every 4 hour.
247 +**2.3  Uplink Payload**
286 286  
249 +In this mode, uplink payload includes 87 bytes in total by default.
287 287  
288 -== 2.3  Uplink Payload ==
251 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
289 289  
253 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
254 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
290 290  
291 -The uplink payload includes 23 bytes in total by default.
292 292  
293 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
257 +|2|2|4|8 group
258 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
294 294  
260 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
295 295  
296 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
297 -|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:50px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**2**
298 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Exit flag|(% style="width:94px" %) [[Distance 1>>||anchor="H2.4.5A0A0Distance"]] |(% style="width:93px" %) [[Distance  2>>||anchor="H2.4.5A0A0Distance"]]
262 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image016.png]]
299 299  
300 -(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
301 -|(% style="width:50px" %)**4**|(% style="width:90px" %)**2**|(% style="width:90px" %)**2**|(% style="width:60px" %)**4**|(% style="width:50px" %)(((
302 -**1-32 group**
303 -)))
304 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.6A0Timestamp"]]| Distance 1 | Distance  2|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
264 +The payload is ASCII string, representative same HEX:
305 305  
306 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NMDS200 uplink data.
266 +0xf86778705021331700640c7817010001000000090000026315537b 0100000b02000002663510fed0100000e0200000263510f39010000000000000063510e85010000000000000063510d2e010000000000000063510c7a010000000000000063510bc6010000000000000063510954010000000000000063510882 where:
307 307  
308 -[[image:1670406261143-723.png]]
268 +* **Device ID: 0x f867787050213317 = f867787050213317**
269 +* **Version: 0x0064=100=1.0.0**
309 309  
271 +* **BAT: 0x0c78 = 3192 mV = 3.192V**
272 +* **Singal: 0x17 = 23**
273 +* **Mod: 0x01 = 1**
274 +* **Calculate Flag: 0x00= 0**
275 +* **Contact Status: 0x00= 0**
276 +* **Alarm:0x00 =0**
277 +* **Total pulse:0x09 =0**
278 +* **The last open duration:0x02 =2**
279 +* **Time stamp : 0x6315537b =1662342011**
280 +* **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000b0200002663510fed**
281 +* **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000e0200002663510f39,.......**
310 310  
311 -The payload is ASCII string, representative same HEX: f867787050471071  0064  0cc3  09  01  00 00ef  013d  6390453d
283 +**2.4  Payload Explanation and Sensor Interface**
312 312  
313 -**0x (% style="color:red" %)__f867787050471071__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0cc3__(% style="color:#00b0f0" %) 0__9__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00ef__(% style="color:#660066" %) (% style="color:#663300" %)__013d__ (% style="color:#d60093" %)__6390453d__(%%)**
285 +**2.4.1  Device ID**
314 314  
315 -**where:**
287 +By default, the Device ID equal to the last 15 bits of IMEI.
316 316  
317 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050471071 = f867787050471071
289 +User can use **AT+DEUI** to set Device ID
318 318  
319 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
291 +**Example:**
320 320  
321 -* (% style="color:#037691" %)**BAT :**(%%)  0x0cc3 = 3267 mV = 3.267V
293 +AT+DEUI=868411056754138
322 322  
323 -* (% style="color:#037691" %)**Singal: **(%%)0x09 = 9
295 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
324 324  
325 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
297 +**2.4.2  Version Info**
326 326  
327 -* (% style="color:#037691" %)**Exit flag: **(%%)0x00 =0
299 +Specify the software version: 0x64=100, means firmware version 1.00.
328 328  
329 -* (% style="color:#037691" %)**Distance 1: **(%%)0x00ef=239
301 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
330 330  
331 -* (% style="color:#037691" %)**Distance 2: **(%%)0x013d =317
303 +**2.4.3  Battery Info**
332 332  
333 -* (% style="color:#037691" %)**Timestamp: **(%%)0x6390453d =1670399293 (Unix Time)
305 +Check the battery voltage for CPN01.
334 334  
307 +Ex1: 0x0B45 = 2885mV
335 335  
309 +Ex2: 0x0B49 = 2889mV
336 336  
337 -== 2.4  Payload Explanation and Sensor Interface ==
311 +**2.4.4  Signal Strength**
338 338  
339 -=== 2.4.1  Device ID ===
313 +NB-IoT Network signal Strength.
340 340  
315 +**Ex1: 0x1d = 29**
341 341  
342 -By default, the Device ID is equal to the last 15 bits of IMEI.
317 +**0**  -113dBm or less
343 343  
344 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
319 +**1**  -111dBm
345 345  
346 -**Example:**
321 +**2...30** -109dBm... -53dBm
347 347  
348 -AT+DEUI=868411056754138
323 +**31**   -51dBm or greater
349 349  
350 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
325 +**99**    Not known or not detectable
351 351  
327 +**2.4.5 Calculate Flag**
352 352  
353 -=== 2.4.2  Version Info ===
329 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
354 354  
331 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
355 355  
356 -Specify the software version: 0x64=100, which means firmware version 1.00.
333 +Default value: 0. 
357 357  
358 -For example 0x00 64 : This device is NMDS200 1 with firmware version 1.0.0.
335 +Range (6 bits): (b)000000 ~~ (b) 111111
359 359  
337 +**2.4.6  Alarm**
360 360  
361 -=== 2.4.3  Battery Info ===
339 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
362 362  
341 +**2.4.7 Contact Status**
363 363  
364 -Check the battery voltage for NMDS200.
343 +0: Open
365 365  
366 -Ex1: 0x0B45 = 2885mV
345 +1: Close
367 367  
368 -Ex2: 0x0B49 = 2889mV
347 +**2.4.8 Total pulse**
369 369  
349 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
370 370  
371 -=== 2.4.4  Signal Strength ===
351 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
372 372  
353 +**2.4.9 The last open duration**
373 373  
374 -NB-IoT Network signal Strength.
355 +Dry Contact last open duration.
375 375  
376 -(% style="color:blue" %)**Ex1: 0x1d = 29**
357 +Unit: min.
377 377  
378 -(% style="color:#037691" %)**0** (%%) -113dBm or less
359 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image017.png]]
379 379  
380 -(% style="color:#037691" %)**1**  (%%) -111dBm
381 381  
382 -(% style="color:#037691" %)**2...30** (%%) -109dBm... -53dBm
362 +**2.4.10  Timestamp**
383 383  
384 -(% style="color:#037691" %)**31** (%%) -51dBm or greater
364 +Time stamp : 0x6315537b =1662342011
385 385  
386 -(% style="color:#037691" %)**99** (%%) Not known or not detectable
366 +Convert Unix timestamp to time 2022-9-5 9:40:11.
387 387  
368 +**~ **
388 388  
389 -=== 2.4.5  Distance ===
370 +**2.5  Downlink Payload**
390 390  
372 +By default, CPN01 prints the downlink payload to console port.
391 391  
392 -[[image:1670407401682-959.png]]
374 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image018.png||alt="说明: image-20220708133731-5.png"]] ​
393 393  
376 +**Examples:**
394 394  
395 -(% style="color:blue" %)**Object1 Distance:**
378 +* **Set TDC**
396 396  
397 -Distance between sensor probe to the first object. (unit: cm)
380 +If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
398 398  
399 -For example, if the data you get from the register is 0x02 0x05, the distance between the sensor and the measured object is
382 +Payload:    01 00 00 1E    TDC=30S
400 400  
401 -(% style="color:blue" %)**0205(H) = 517 (D) = 517 cm.**
384 +Payload:    01 00 00 3C    TDC=60S
402 402  
386 +* **Reset**
403 403  
404 -(% style="color:blue" %)**Object2 Distance:**
388 +If payload = 0x04FF, it will reset the NSE01
405 405  
406 -Distance between sensor probe to the second object. (unit: cm)
390 +* **INTMOD**
407 407  
392 +Downlink Payload: 06000003, Set AT+INTMOD=3
408 408  
409 -=== 2.4.6  Timestamp ===
394 +**2.6  ​LED Indicator**
410 410  
396 +The CPN01 has an internal LED which is to show the status of different state.
411 411  
412 -Timestamp : 0x6315537b =1662342011
398 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
399 +* Then the LED will be on for 1 second means device is boot normally.
400 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
401 +* For each uplink probe, LED will be on for 500ms.
413 413  
403 +**2.7 ** Alarm Base on Timeout
414 414  
415 -== 2.5  Downlink Payload ==
405 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
416 416  
417 417  
418 -By default, NMDS200 prints the downlink payload to console port.
408 +**~1. Keep Status: Status to be monitor**
419 419  
420 -[[image:image-20221021111414-18.png]] ​
410 +Keep Status = 1: Monitor Close to Open event
421 421  
412 +Keep Status = 0: Monitor Open to Close event
422 422  
423 -**Examples:**
424 424  
425 -* (% style="color:#037691" %)**Set TDC**
415 +**2. Keep Time: Timeout to send an Alarm**
426 426  
427 -If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
417 +Range 0 ~~ 65535(0xFFFF) seconds.
428 428  
429 -Payload:    01 00 00 1E    TDC=30S
419 +If keep time = 0, Disable Alarm Base on Timeout feature.
430 430  
431 -Payload:    01 00 00 3C    TDC=60S
421 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
432 432  
433 -* (% style="color:#037691" %)**Reset**
434 434  
435 -If payload = 0x04FF, it will reset the NMDS200
424 +**AT Command** to configure:
436 436  
437 -* (% style="color:#037691" %)**INTMOD**
426 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
438 438  
439 -Downlink Payload: 06000003, Set AT+INTMOD=3
428 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
440 440  
430 +**2.8** Set debug mode
441 441  
442 -== 2.6  ​LED Indicator ==
432 +Feature: Enable or Disable debug mode
443 443  
444 444  
445 -The NMDS200 has an internal LED which is to show the status of different states.
435 +**AT Command: AT+DEBUG**
446 446  
447 -* When the device starts normally, the LED will light up for 1 second.
448 -* After NMDS200 join NB-IoT network. The LED will be ON for 3 seconds.
449 -* For each uplink probe, LED will be on for 500ms.
437 +|**Command Example**|**Function**|**Response**
438 +|AT+DEBUG =0|Disable debug mode to 0|OK
439 +|AT+ DEBUG =1|Enable debug mode to 1|OK
450 450  
441 +== 2.9 Clear Flash Record ==
451 451  
443 +Feature: Clear flash storage for data log feature.
452 452  
453 -== 2.7  Distance alarm function ==
445 +**AT Command: AT+CLRDTA**
454 454  
447 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image019.png||alt="说明: image-20220609151132-7.png"]]
455 455  
456 -(% style="color:blue" %)**AT Command: AT+ALARM1=min,max**
449 +**~ 2.10 **Set trigger mode
457 457  
458 -(% style="color:#037691" %)**Example 1:**
451 +➢ AT Command: **AT+TTRMOD**
459 459  
460 -AT+ ALARM1 =60,200  ~/~/ Alarm when moisture lower than 60.
453 +Feature: Set the trigger interrupt mode.
461 461  
462 -AT+ ALARM2 =min,max
455 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image020.png||alt="说明: image-20220609151344-9.png"]]
463 463  
457 +**2.11** Set the calculate flag
464 464  
465 -(% style="color:#037691" %)**Example 2:**
459 +Feature: Set the calculate flag
466 466  
467 -AT+ ALARM2 =200,1500  ~/~/ Alarm when temperature lower than 1500
461 +**AT Command: AT+CALCFLAG**
468 468  
463 +|**Command Example**|**Function**|**Response**
464 +|AT+CALCFLAG =1|Set the calculate flag to 1.|OK
465 +|AT+CALCFLAG =2|Set the calculate flag to 2.|OK
469 469  
467 +**2.12** Set count number
470 470  
469 +Feature: Manually set the count number
471 471  
472 -== 2.8  Set the number of data to be uploaded and the recording time ==
471 +**AT Command: AT+SETCNT**
473 473  
473 +|**Command Example**|**Function**|**Response**
474 +|AT+ SETCNT =0|Set the count number to 0.|OK
475 +|AT+ SETCNT =100|Set the count number to 100.|OK
474 474  
475 -(% style="color:blue" %)**AT Command:**
476 476  
477 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
478 +**2.13 Set the number of data to be uploaded and the recording time**
478 478  
479 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
480 +➢ AT Command:
480 480  
482 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
481 481  
482 -== 2.9  Read or Clear cached data ==
483 483  
485 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
484 484  
485 -(% style="color:blue" %)**AT Command:**
487 +**2.14 Read or Clear cached data**
486 486  
487 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
489 +➢ AT Command:
488 488  
489 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
491 +AT+CDP    ~/~/ Read cached data
490 490  
491 -[[image:1670408172929-569.png]]
493 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image021.png]]
492 492  
493 493  
494 -== 2.10  ​Firmware Change Log ==
496 +AT+CDP=0    ~/~/ Clear cached data ​
495 495  
498 +**2.15  ​Firmware Change Log**
496 496  
497 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
500 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
498 498  
499 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
502 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
500 500  
504 +**2.16  ​Battery Analysis**
501 501  
502 -== 2.11  ​Battery Analysis ==
506 +**2.16.1  ​Battery Type**
503 503  
504 -=== 2.11.1  ​Battery Type ===
508 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
505 505  
510 +The battery is designed to last for several years depends on the actually use environment and update interval. 
506 506  
507 -The NMDS200 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
512 +The battery related documents as below:
508 508  
509 -The battery is designed to last for several years depends on the actual use environment and update interval. 
510 -
511 -The battery-related documents as below:
512 -
513 513  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
514 -
515 515  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
516 -
517 517  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
518 518  
519 -[[image:image-20221021111911-26.png]] ​
518 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image022.png||alt="说明: image-20220708140453-6.png"]] ​
520 520  
520 +**2.16.2  Power consumption Analyze**
521 521  
522 -=== 2.11.2  Power consumption Analyze ===
523 -
524 -
525 525  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
526 526  
527 527  Instruction to use as below:
528 528  
529 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
526 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
530 530  
531 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
528 +**Step 2: ** Open it and choose
532 532  
533 533  * Product Model
534 -
535 535  * Uplink Interval
536 -
537 537  * Working Mode
538 538  
539 539  And the Life expectation in difference case will be shown on the right.
540 540  
541 -[[image:1666596205057-567.png]] ​
536 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image023.jpg||alt="说明: image-20220708141352-7.jpeg"]] ​
542 542  
538 +**2.16.3  ​Battery Note**
543 543  
544 -=== 2.11.3  ​Battery Note ===
545 -
546 -
547 547  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
548 548  
542 +**2.16.4  Replace the battery**
549 549  
550 -=== 2.11.4  Replace the battery ===
544 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
551 551  
546 +**3. ​ Access NB-IoT Module**
552 552  
553 -The default battery pack of NMDS200 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
554 -
555 -
556 -= 3. ​ Access NB-IoT Module =
557 -
558 -
559 559  Users can directly access the AT command set of the NB-IoT module.
560 560  
561 561  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
562 562  
552 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image024.png||alt="说明: 1657261278785-153.png"]] ​
563 563  
564 -[[image:image-20221118094449-6.png]] ​
554 +**4.  Using the AT Commands**
565 565  
556 +**4.1  Access AT Commands**
566 566  
567 -= 4.  Using the AT Commands =
568 -
569 -== 4.1  Access AT Commands ==
570 -
571 -
572 572  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
573 573  
574 574  AT+<CMD>?  : Help on <CMD>
... ... @@ -579,9 +579,8 @@
579 579  
580 580  AT+<CMD>=?  : Get the value
581 581  
568 +**General Commands**      
582 582  
583 -(% style="color:blue" %)**General Commands**      
584 -
585 585  AT  : Attention       
586 586  
587 587  AT?  : Short Help     
... ... @@ -604,97 +604,125 @@
604 604  
605 605  AT+SERVADDR  : Server Address
606 606  
607 -AT+TR      :  Get or Set record time
592 +AT+TR      : Get or Set record time"
608 608  
609 -AT+NOUD :  Get or Set the number of data to be uploaded
610 610  
611 -AT+CDP     :  Read or Clear cached data
595 +AT+NOUD      : Get or Set the number of data to be uploaded
612 612  
613 -AT+DEBUG:  Enable or Disable debug mode
614 614  
615 -AT+ALARM1:  Get or Set alarm of distance1
598 +AT+CDP     : Read or Clear cached data
616 616  
617 -AT+ALARM2:  Get or Set alarm of distance2
618 618  
619 -AT+GETSENSORVALUE :  Returns the current sensor measurement
601 +AT+ DEBUG   : Enable or Disable debug mode
620 620  
621 -AT+POWERIC :  Get or set the Power IC flag
603 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
622 622  
605 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
623 623  
624 -(% style="color:blue" %)**COAP Management**      
607 +AT+ CALCFLAG   : Get or Set the calculate flag
625 625  
626 -AT+URI :  Resource parameters
609 +AT+ CLRC   : Clear current door open count
627 627  
611 +**COAP Management**      
628 628  
629 -(% style="color:blue" %)**UDP Management**
613 +AT+URI            : Resource parameters
630 630  
631 -AT+CFM :  Upload confirmation mode (only valid for UDP)
615 +**UDP Management**
632 632  
617 +AT+CFM          : Upload confirmation mode (only valid for UDP)
633 633  
634 -(% style="color:blue" %)**MQTT Management**
619 +**MQTT Management**
635 635  
636 -AT+CLIENT  : Get or Set MQTT client
621 +AT+CLIENT               : Get or Set MQTT client
637 637  
638 -AT+UNAME : Get or Set MQTT Username
623 +AT+UNAME  : Get or Set MQTT Username
639 639  
640 -AT+PWD  :  Get or Set MQTT password
625 +AT+PWD                  : Get or Set MQTT password
641 641  
642 -AT+PUBTOPIC :  Get or Set MQTT publish topic
627 +AT+PUBTOPIC  : Get or Set MQTT publish topic
643 643  
644 -AT+SUBTOPIC :  Get or Set MQTT subscription topic
629 +AT+SUBTOPIC  : Get or Set MQTT subscription topic
645 645  
631 +**Information**          
646 646  
647 -(% style="color:blue" %)**Information**          
633 +AT+FDR  : Factory Data Reset
648 648  
649 -AT+FDR :  Factory Data Reset
635 +AT+PWORD  : Serial Access Password
650 650  
651 -AT+PWORD :  Serial Access Password
637 +**​5.  FAQ**
652 652  
639 +**5.1 ​ How to Upgrade Firmware**
653 653  
654 -= ​5.  FAQ =
641 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
655 655  
656 -== 5.1 ​ How to Upgrade Firmware ==
643 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
657 657  
645 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
658 658  
659 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
647 +**5.2  Can I calibrate CPN01 to different soil types?**
660 660  
661 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
649 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
662 662  
663 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NMDS200** (%%)**and (% style="color:blue" %)LMDS200(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
651 +**6.  Trouble Shooting**
664 664  
653 +**6.1  ​Connection problem when uploading firmware**
665 665  
666 -= 6.  Trouble Shooting =
655 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
667 667  
668 -== 6.1  ​Connection problem when uploading firmware ==
657 +**6.2  AT Command input doesn't work**
669 669  
659 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
670 670  
671 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
661 +**7. ​ Order Info**
672 672  
663 +Part Number**:** CPN01
673 673  
674 -== 6.2  AT Command input doesn't work ==
665 +**8.  Packing Info**
675 675  
667 +**Package Includes**:
676 676  
677 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
669 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
670 +* External antenna x 1
678 678  
672 +**Dimension and weight**:
679 679  
680 -= 7. ​ Order Info =
674 +* Size: 195 x 125 x 55 mm
675 +* Weight:   420g
681 681  
677 +**9.  Support**
682 682  
683 -Part Number:(% style="color:blue" %)** NMDS200**
679 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
680 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
684 684  
682 +​
685 685  
686 -= 8.  Packing Info =
687 687  
688 688  
689 -(% style="color:blue" %)**Package Includes**:
690 690  
691 -* NMDS200 NB-IoT Microwave Radar Distance Sensor x 1
692 692  
693 -= 9.  Support =
694 694  
695 695  
696 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
697 697  
698 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
699 699  
700 -​
692 +
693 +
694 +
695 +
696 +
697 +
698 +
699 +
700 +
701 +
702 +
703 +
704 +
705 +
706 +
707 +
708 +
709 +
710 +
711 +
712 +
713 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
1670404362039-351.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -492.6 KB
Content
1670405841875-916.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.1 KB
Content
1670405928926-116.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.7 KB
Content
1670406036256-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -181.0 KB
Content
1670406261143-723.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.9 KB
Content
1670407401682-959.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -23.7 KB
Content
1670408172929-569.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -211.8 KB
Content
LMDS200_10.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
image-20221021111923-27.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -130.6 KB
Content
image-20221021112006-28.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content
image-20221207170748-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -26.1 KB
Content
image-20221207170748-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.9 KB
Content
image-20221207173200-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.7 KB
Content
image-20221207173300-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.0 KB
Content
image-20221208090742-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0