Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 83.10 >
edited by Xiaoling
on 2022/12/08 11:32
To version < 70.4 >
edited by Xiaoling
on 2022/11/18 10:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
1 +NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
Content
... ... @@ -1,7 +1,12 @@
1 1  (% style="text-align:center" %)
2 -[[image:LMDS200_10.jpg]]
2 +[[image:image-20221117105556-1.png]]
3 3  
4 4  
5 +
6 +
7 +
8 +
9 +
5 5  **Table of Contents：**
6 6  
7 7  {{toc/}}
... ... @@ -9,51 +9,54 @@
9 9  
10 10  
11 11  
17 +
12 12  = 1.  Introduction =
13 13  
14 -== 1.1 ​ What is NMDS200 NB-IoT Microwave Radar Distance Sensor ==
20 +== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
15 15  
16 16  
17 17  (((
18 -The Dragino NMDS200 is a(% style="color:blue" %)** NB-IoT Microwave Radar distance sensor**(%%). It uses (% style="color:blue" %)**24Ghz Microwave**(%%) to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is (% style="color:blue" %)**more reliable for condensation / dusty environment**(%%). It can sense correct distance even there is water or thick dust on top of the sensor.
24 +The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
19 19  )))
20 20  
21 21  (((
22 -The NMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
28 +The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
23 23  )))
24 24  
25 25  (((
26 -NMDS200 can (% style="color:blue" %)**measure two distances**(%%): the closest object and next object behind the closest one.
32 +NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
27 27  )))
28 28  
29 29  (((
30 -NMDS200 (% style="color:blue" %)**supports Alarm Feature**(%%), user can set the NMDS200 to uplink data in a short interval when the distance is out of configured range.
36 +NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
31 31  )))
32 32  
33 33  (((
34 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
40 +NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
35 35  )))
36 36  
37 37  (((
38 -NMDS200 (% style="color:blue" %)**supports different uplink**(%%) methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
44 +NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
39 39  )))
40 40  
41 41  (((
42 -NMDS200 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**,(%%) It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
48 +NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
43 43  )))
44 44  
45 45  (((
46 -To use NMDS200, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NMDS200 supports. If local operator support it, user needs to get a** (% style="color:blue" %)NB-IoT SIM card(%%)** from the operator and install into NMDS200 to get NB-IoT network connection.
52 +To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
47 47  )))
48 48  
49 49  
56 +
50 50  == ​1.2  Features ==
51 51  
52 52  
53 53  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
54 -* Short uplink interval for Distance Alarm
61 +* Open/Close detect
62 +* Open/Close statistics
55 55  * Monitor Battery Level
56 -* Microwave Radar for distance detection
64 +* connect two door sensors
57 57  * Datalog feature
58 58  * Uplink periodically
59 59  * Downlink to change configure
... ... @@ -64,37 +64,34 @@
64 64  * Micro SIM card slot for NB-IoT SIM
65 65  * 8500mAh Battery for long-term use
66 66  
67 -== 1.3 Radar probe specification ==
68 68  
69 69  
70 -* Measuring Method: FMCW
71 -* Frequency: 24.000 24.500 GHz
72 -* Measurement output power: 6dBm
73 -* Measure range: 0.5 20m
74 -* Accuracy: ±0.1m
75 -* Resolution: 0.01m
76 -* Horizontal Angel: 78°
77 -* Vertical Angel: 23°
77 +== 1.3  Storage & Operation ==
78 78  
79 -== 1.4  Storage Temperature ==
80 80  
80 +Temperature -40°C to +85°C
81 81  
82 - -40°C to +85°C
83 83  
83 +== 1.4  Mechanical ==
84 84  
85 +
86 +[[image:image-20221117114937-4.png]]
87 +
88 +
89 +[[image:image-20221117114949-5.png]]
90 +
91 +
92 +[[image:image-20221117115010-6.png]]
93 +
94 +
95 +
85 85  == 1.5 ​ Applications ==
86 86  
87 87  
88 -* Horizontal distance measurement
89 -* Liquid level measurement
90 -* Parking management system
91 -* Object proximity and presence detection
92 -* Intelligent trash can management system
93 -* Robot obstacle avoidance
94 -* Automatic control
95 -* Sewer
96 -* Bottom water level monitoring
99 +[[image:image-20221117114842-3.png]]
97 97  
101 +
102 +
98 98  == 1.6  Specification ==
99 99  
100 100  
... ... @@ -101,60 +101,98 @@
101 101  (% style="color:blue" %)**Common DC Characteristics:**
102 102  
103 103  * Supply Voltage: 2.1v ~~ 3.6v
104 -* Operating Temperature: 0 ~~ 70°C
109 +* Operating Temperature: -40 ~~ 85°C
105 105  
106 106  (% style="color:blue" %)**NB-IoT Spec:**
107 107  
108 -* B1 @H-FDD: 2100MHz
109 -* B3 @H-FDD: 1800MHz
110 -* B8 @H-FDD: 900MHz
111 -* B5 @H-FDD: 850MHz
112 -* B20 @H-FDD: 800MHz
113 -* B28 @H-FDD: 700MHz
113 +* - B1 @H-FDD: 2100MHz
114 +* - B3 @H-FDD: 1800MHz
115 +* - B8 @H-FDD: 900MHz
116 +* - B5 @H-FDD: 850MHz
117 +* - B20 @H-FDD: 800MHz
118 +* - B28 @H-FDD: 700MHz
114 114  
115 -== 1.7  Installation ==
116 116  
117 117  
118 -Sensor measure direction and angle is as below. When install the sensor, please make sure the sensor direct to object.
122 +== 1.7  Pin Definitions and Switch ==
119 119  
120 120  
121 -[[image:image-20221207170748-1.png]] [[image:image-20221207170748-2.png||height="294" width="540"]]
125 +[[image:image-20221021110429-4.png]]
122 122  
123 123  
128 +=== 1.7.1  Pin Definition ===
124 124  
125 -== 1.8  Pin Definitions and Switch ==
126 126  
131 +The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
127 127  
128 -[[image:1670404362039-351.png]]
129 129  
134 +=== 1.7.2  Jumper JP2(Power ON/OFF) ===
130 130  
131 -= 2.  Use NMDS200 to communicate with IoT Server =
132 132  
137 +Power on Device when putting this jumper.
138 +
139 +
140 +=== 1.7.3  BOOT MODE / SW1 ===
141 +
142 +
143 +1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
144 +
145 +2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
146 +
147 +
148 +=== 1.7.4  Reset Button ===
149 +
150 +
151 +Press to reboot the device.
152 +
153 +
154 +=== 1.7.5  LED ===
155 +
156 +
157 +The LED will blink when :
158 +
159 +1.  Boot the device in flash mode
160 +
161 +2.  Send an uplink packet
162 +
163 +
164 +== 1.8  Magnet Distance ==
165 +
166 +
167 +(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
168 +
169 +(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
170 +
171 +
172 += 2.  Use NDS03A to communicate with IoT Server =
173 +
133 133  == 2.1  How it works ==
134 134  
135 135  
136 -The NB-IoT network will forward this value to IoT server via the protocol defined by NMDS200.
177 +In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
137 137  
138 -The diagram below shows the working flow in the default firmware of NMDS200:
179 +The diagram below shows the working flow in the default firmware of NDS03A:
139 139  
140 140  [[image:image-20221021110615-5.png]]
141 141  
142 142  
143 -== 2.2 ​ Configure NMDS200 ==
184 +== 2.2 ​ Configure NDS03A ==
144 144  
186 +=== 2.2.1 Test Requirement ===
145 145  
146 -To use NMDS200 in your city, make sure to meet below requirements:
147 147  
189 +To use NDS03A in your city, make sure to meet below requirements:
190 +
148 148  * Your local operator has already distributed an NB-IoT Network.
149 -* The local NB-IoT network used the band that NMDS200 supports.
192 +* The local NB-IoT network used the band that NDS03A supports.
150 150  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
151 151  
152 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NMDS200 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
195 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
153 153  
154 -[[image:image-20221208090742-1.png]]
197 +[[image:image-20221117142300-1.png]]
155 155  
156 156  
157 -=== 2.2.1 Insert NB-IoT SIM card ===
200 +=== 2.2.2 Insert NB-IoT SIM card ===
158 158  
159 159  
160 160  Insert the NB-IoT Card get from your provider.
... ... @@ -164,10 +164,10 @@
164 164  [[image:image-20221021110745-6.png]] ​
165 165  
166 166  
167 -=== 2.2.2 Connect USB – TTL to NMDS200 and configure it ===
210 +=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
168 168  
169 169  
170 -User need to configure NMDS200 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NMDS200 support AT Commands, user can use a USB to TTL adapter to connect to NMDS200 and use AT Commands to configure it, as below.
213 +User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
171 171  
172 172  (% style="color:blue" %)**Connection:**
173 173  
... ... @@ -190,11 +190,11 @@
190 190  
191 191  * Flow Control: (% style="color:red" %)**None**
192 192  
193 -Make sure the switch is in FLASH position, then power on NMDS200 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
236 +Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
194 194  
195 195  ​[[image:image-20221021110817-7.png]]
196 196  
197 -NMDS200 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
240 +NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
198 198  
199 199  
200 200  (% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
... ... @@ -201,13 +201,13 @@
201 201  
202 202  
203 203  
204 -=== 2.2.3 Use CoAP protocol to uplink data ===
247 +=== 2.2.4 Use CoAP protocol to uplink data ===
205 205  
206 206  
207 207  (% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
208 208  
209 209  
210 -(% style="color:blue" %)**Use below commands in NMDS200:**
253 +(% style="color:blue" %)**Use below commands in NDS03A:**
211 211  
212 212  * (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
213 213  
... ... @@ -220,12 +220,12 @@
220 220  [[image:image-20221021110948-8.png]]
221 221  
222 222  
223 -After configuring the server address and (% style="color:green" %)**reset NMDS200**(%%) (via AT+ATZ ), NMDS200 will start to uplink sensor values to the CoAP server.
266 +After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
224 224  
225 -[[image:1670405841875-916.png]] ​
268 +[[image:image-20221118103547-9.png||height="605" width="837"]] ​
226 226  
227 227  
228 -=== 2.2.4 Use UDP protocol to uplink data(Default protocol) ===
271 +=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
229 229  
230 230  
231 231  (% style="color:blue" %)**AT Commands:**
... ... @@ -243,7 +243,7 @@
243 243  
244 244  ​
245 245  
246 -=== 2.2.5 Use MQTT protocol to uplink data ===
289 +=== 2.2.6 Use MQTT protocol to uplink data ===
247 247  
248 248  
249 249  (% style="color:blue" %)**AT Commands:**
... ... @@ -265,7 +265,7 @@
265 265  ​ [[image:image-20221118103445-7.png]]
266 266  
267 267  
268 -[[image:1670405928926-116.png]]
311 +[[image:image-20221118103453-8.png||height="608" width="841"]]
269 269  
270 270  ​
271 271  
... ... @@ -272,7 +272,7 @@
272 272  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
273 273  
274 274  
275 -=== 2.2.6 Use TCP protocol to uplink data ===
318 +=== 2.2.7 Use TCP protocol to uplink data ===
276 276  
277 277  
278 278  (% style="color:blue" %)**AT Commands:**
... ... @@ -281,19 +281,18 @@
281 281  
282 282  * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
283 283  
284 -​ [[image:1670406036256-101.png||height="676" width="713"]]
327 +​ [[image:image-20221021111125-14.png]]
285 285  
286 -
287 287  [[image:image-20221021111131-15.png]]
288 288  
289 289  ​
290 290  
291 -=== 2.2.7 Change Update Interval ===
333 +=== 2.2.8 Change Update Interval ===
292 292  
293 293  
294 294  User can use below command to change the (% style="color:blue" %)**uplink interval**.
295 295  
296 -* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (4 hours)
338 +* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
297 297  
298 298  (% style="color:red" %)**NOTE:**
299 299  
... ... @@ -303,51 +303,74 @@
303 303  == 2.3  Uplink Payload ==
304 304  
305 305  
306 -The uplink payload includes 23 bytes in total by default.
348 +The uplink payload includes 26 bytes in total by default.
307 307  
308 308  Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
309 309  
352 +(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
310 310  
311 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:450px" %)
312 -|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:30px" %)**2**|(% style="width:30px" %)**2**|(% style="width:75px" %)**1**|(% style="width:30px" %)**1**|(% style="width:50px" %)**1**|(% style="width:60px" %)**2**|(% style="width:60px" %)**2**
313 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Exit flag|(% style="width:94px" %) [[Distance 1>>||anchor="H2.4.5A0Distance"]] |(% style="width:93px" %) [[Distance 2>>||anchor="H2.4.5A0Distance"]]
354 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
355 +|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
356 +|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
314 314  
315 -(% border="1" style="background-color:#ffffcc; color:green; width:350px" %)
316 -|(% style="width:60px" %)**4**|(% style="width:60px" %)**2**|(% style="width:60px" %)**2**|(% style="width:60px" %)**4**|(% style="width:100px" %)(((
358 +(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
359 +|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
317 317  **1-32 group**
318 318  )))
319 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.6A0Timestamp"]]| Distance 1 | Distance  2|(% style="width:67px" %)Time stamp|(% style="width:98px" %)...
362 +|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
320 320  
321 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NMDS200 uplink data.
322 322  
323 -[[image:1670406261143-723.png]]
324 324  
366 +(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
325 325  
326 -The payload is ASCII string, representative same HEX: f867787050471071  0064  0cc3  09  01  00 00ef  013d  6390453d
327 327  
328 -**0x (% style="color:red" %)__f867787050471071__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0cc3__(% style="color:#00b0f0" %) 0__9__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00ef__(% style="color:#660066" %) (% style="color:#663300" %)__013d__ (% style="color:#d60093" %)__6390453d__(%%)**
369 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
370 +|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
371 +|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
329 329  
373 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
374 +|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
375 +|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
376 +
377 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
378 +|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
379 +**1-32 group**
380 +)))
381 +|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
382 +
383 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
384 +
385 +[[image:image-20221117145932-2.png]]
386 +
387 +
388 +The payload is ASCII string, representative same HEX:
389 +
390 +**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
391 +
330 330  **where:**
331 331  
332 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050471071 = f867787050471071
394 +* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
333 333  
334 334  * (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
335 335  
336 -* (% style="color:#037691" %)**BAT :**(%%)  0x0cc3 = 3267 mV = 3.267V
398 +* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
337 337  
338 -* (% style="color:#037691" %)**Singal: **(%%)0x09 = 9
400 +* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
339 339  
340 340  * (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
341 341  
342 -* (% style="color:#037691" %)**Exit flag: **(%%)0x00 =0
404 +* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
343 343  
344 -* (% style="color:#037691" %)**Distance 1: **(%%)0x00ef=239
406 +* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
345 345  
346 -* (% style="color:#037691" %)**Distance 2: **(%%)0x013d =317
408 +* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
347 347  
348 -* (% style="color:#037691" %)**Timestamp: **(%%)0x6390453d =1670399293 (Unix Time)
410 +* (% style="color:#037691" %)**last open time:  **(%%)0x000017 =23
349 349  
412 +* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
350 350  
414 +
415 +
351 351  == 2.4  Payload Explanation and Sensor Interface ==
352 352  
353 353  === 2.4.1  Device ID ===
... ... @@ -369,13 +369,13 @@
369 369  
370 370  Specify the software version: 0x64=100, which means firmware version 1.00.
371 371  
372 -For example 0x00 64 : This device is NMDS200 1 with firmware version 1.0.0.
437 +For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
373 373  
374 374  
375 375  === 2.4.3  Battery Info ===
376 376  
377 377  
378 -Check the battery voltage for NMDS200.
443 +Check the battery voltage for NDS03A.
379 379  
380 380  Ex1: 0x0B45 = 2885mV
381 381  
... ... @@ -387,49 +387,51 @@
387 387  
388 388  NB-IoT Network signal Strength.
389 389  
390 -(% style="color:blue" %)**Ex1: 0x1d = 29**
455 +**Ex1: 0x1d = 29**
391 391  
392 -(% style="color:#037691" %)**0** (%%) -113dBm or less
457 +**0**  -113dBm or less
393 393  
394 -(% style="color:#037691" %)**1**  (%%) -111dBm
459 +**1**  -111dBm
395 395  
396 -(% style="color:#037691" %)**2...30** (%%) -109dBm... -53dBm
461 +**2...30** -109dBm... -53dBm
397 397  
398 -(% style="color:#037691" %)**31** (%%) -51dBm or greater
463 +**31**   -51dBm or greater
399 399  
400 -(% style="color:#037691" %)**99** (%%) Not known or not detectable
465 +**99**    Not known or not detectable
401 401  
402 402  
403 -=== 2.4.5  Distance ===
468 +=== 2.4.5  Disalarm: (default: 0) ===
404 404  
405 405  
406 -[[image:1670407401682-959.png]]
471 +(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
407 407  
473 +(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
408 408  
409 -(% style="color:blue" %)**Object1 Distance:**
475 + (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
410 410  
411 -Distance between sensor probe to the first object. (unit: cm)
412 412  
413 -For example, if the data you get from the register is 0x02 0x05, the distance between the sensor and the measured object is
478 +=== 2.4.6  Keep Status & Keep Time ===
414 414  
415 -(% style="color:blue" %)**0205(H) = 517 (D) = 517 cm.**
416 416  
481 +Shows the configure value of Alarm Base on Timeout Feature
417 417  
418 -(% style="color:blue" %)**Object2 Distance:**
419 419  
420 -Distance between sensor probe to the second object. (unit: cm)
484 +=== 2.4.7  Timestamp ===
421 421  
422 422  
423 -=== 2.4.6  Timestamp ===
487 +Timestamp : 0x6315537b =1662342011
424 424  
425 425  
426 -Timestamp : 0x6315537b =1662342011
490 +=== 2.4.8  Switch Dual Channel Mode ===
427 427  
428 428  
493 +NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
494 +
495 +
429 429  == 2.5  Downlink Payload ==
430 430  
431 431  
432 -By default, NMDS200 prints the downlink payload to console port.
499 +By default, NDS03A prints the downlink payload to console port.
433 433  
434 434  [[image:image-20221021111414-18.png]] ​
435 435  
... ... @@ -446,7 +446,7 @@
446 446  
447 447  * (% style="color:#037691" %)**Reset**
448 448  
449 -If payload = 0x04FF, it will reset the NMDS200
516 +If payload = 0x04FF, it will reset the NDS03A
450 450  
451 451  * (% style="color:#037691" %)**INTMOD**
452 452  
... ... @@ -456,33 +456,114 @@
456 456  == 2.6  ​LED Indicator ==
457 457  
458 458  
459 -The NMDS200 has an internal LED which is to show the status of different states.
526 +The NDS03A has an internal LED which is to show the status of different states.
460 460  
461 461  * When the device starts normally, the LED will light up for 1 second.
462 -* After NMDS200 join NB-IoT network. The LED will be ON for 3 seconds.
529 +* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
463 463  * For each uplink probe, LED will be on for 500ms.
464 464  
465 465  
466 -== 2.7  Distance alarm function ==
467 467  
534 +== 2.7  Alarm Base on Timeout ==
468 468  
469 -(% style="color:blue" %)**AT Command: AT+ALARM1=min,max**
470 470  
471 -(% style="color:#037691" %)**Example 1:**
537 +NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
472 472  
473 -AT+ ALARM1 =60,200  ~/~/ Alarm when moisture lower than 60.
474 474  
475 -AT+ ALARM2 =min,max
540 +(% style="color:blue" %)**1. Keep Status: Status to be monitor**
476 476  
542 +Keep Status = 1: Monitor Close to Open event
477 477  
478 -(% style="color:#037691" %)**Example 2:**
544 +Keep Status = 0: Monitor Open to Close event
479 479  
480 -AT+ ALARM2 =200,1500  ~/~/ Alarm when temperature lower than 1500
481 481  
547 +(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
482 482  
483 -== 2.8  Set the number of data to be uploaded and the recording time ==
549 +Range 0 ~~ 65535(0xFFFF) seconds.
484 484  
551 +If keep time = 0, Disable Alarm Base on Timeout feature.
485 485  
553 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
554 +
555 +
556 +(% style="color:blue" %)**AT Command to configure:**
557 +
558 +(% style="color:blue" %)**PB14 PIN:**
559 +
560 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
561 +
562 +(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
563 +
564 +
565 +(% style="color:blue" %)**PB15 PIN:**
566 +
567 +(% style="color:#037691" %)**AT+TTRIG2=1,30**
568 +
569 +(% style="color:#037691" %)**AT+TTRIG2=0,0 **
570 +
571 +
572 +== 2.8  Set debug mode ==
573 +
574 +
575 +Feature: Enable or Disable debug mode
576 +
577 +(% style="color:blue" %)**AT Command: AT+DEBUG**
578 +
579 +[[image:image-20221021111629-21.png]]
580 +
581 +
582 +
583 +== 2.9  Clear Flash Record ==
584 +
585 +
586 +Feature: Clear flash storage for data log feature.
587 +
588 +(% style="color:blue" %)**AT Command: AT+CLRDTA**
589 +
590 +[[image:image-20221021111527-19.png]]
591 +
592 +
593 +== 2.10  Count Mod ==
594 +
595 +
596 +(% style="color:blue" %)**AT Command: AT+COUNTMOD**
597 +
598 +[[image:image-20221118092935-1.png]]
599 +
600 +
601 +== 2.11  Interrupt Pin Channel Mod ==
602 +
603 +
604 +(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
605 +
606 +[[image:image-20221118093144-2.png]]
607 +
608 +
609 +== 2.12 TTRIG1/2 timeout status alarm ==
610 +
611 +
612 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
613 +
614 +(% style="color:blue" %)**AT Command: AT+TTRALARM**
615 +
616 +[[image:image-20221118093512-3.png]]
617 +
618 +
619 +== 2.13  Select counting mode ==
620 +
621 +
622 +(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
623 +
624 +When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
625 +
626 +When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
627 +
628 +[[image:image-20221118093658-4.png]]
629 +
630 +
631 +== 2.14  Set the number of data to be uploaded and the recording time ==
632 +
633 +
486 486  (% style="color:blue" %)**AT Command:**
487 487  
488 488  (% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
... ... @@ -490,7 +490,7 @@
490 490  (% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
491 491  
492 492  
493 -== 2.9  Read or Clear cached data ==
641 +== 2.15  Read or Clear cached data ==
494 494  
495 495  
496 496  (% style="color:blue" %)**AT Command:**
... ... @@ -499,10 +499,10 @@
499 499  
500 500  (% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
501 501  
502 -[[image:1670408172929-569.png]]
650 +[[image:image-20221118094227-5.png]]
503 503  
504 504  
505 -== 2.10  ​Firmware Change Log ==
653 +== 2.16  ​Firmware Change Log ==
506 506  
507 507  
508 508  Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
... ... @@ -510,12 +510,12 @@
510 510  Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
511 511  
512 512  
513 -== 2.11  ​Battery Analysis ==
661 +== 2.17  ​Battery Analysis ==
514 514  
515 -=== 2.11.1  ​Battery Type ===
663 +=== 2.17.1  ​Battery Type ===
516 516  
517 517  
518 -The NMDS200 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
666 +The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
519 519  
520 520  The battery is designed to last for several years depends on the actual use environment and update interval. 
521 521  
... ... @@ -530,7 +530,7 @@
530 530  [[image:image-20221021111911-26.png]] ​
531 531  
532 532  
533 -=== 2.11.2  Power consumption Analyze ===
681 +=== 2.17.2  Power consumption Analyze ===
534 534  
535 535  
536 536  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
... ... @@ -552,16 +552,16 @@
552 552  [[image:1666596205057-567.png]] ​
553 553  
554 554  
555 -=== 2.11.3  ​Battery Note ===
703 +=== 2.17.3  ​Battery Note ===
556 556  
557 557  
558 558  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
559 559  
560 560  
561 -=== 2.11.4  Replace the battery ===
709 +=== 2.17.4  Replace the battery ===
562 562  
563 563  
564 -The default battery pack of NMDS200 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
712 +The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
565 565  
566 566  
567 567  = 3. ​ Access NB-IoT Module =
... ... @@ -571,7 +571,6 @@
571 571  
572 572  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
573 573  
574 -
575 575  [[image:image-20221118094449-6.png]] ​
576 576  
577 577  
... ... @@ -607,59 +607,65 @@
607 607  
608 608  AT+INTMOD            : Set the trigger interrupt mode
609 609  
610 -AT+5VT  : Set extend the time of 5V power  
757 +AT+5VT  : Set extend the time of 5V power  
611 611  
612 -AT+PRO  : Choose agreement
759 +AT+PRO  : Choose agreement
613 613  
614 -AT+RXDL  : Extend the sending and receiving time
761 +AT+RXDL  : Extend the sending and receiving time
615 615  
616 -AT+SERVADDR  : Server Address
763 +AT+SERVADDR  : Server Address
617 617  
618 -AT+TR      :  Get or Set record time
765 +AT+TR      :  Get or Set record time
619 619  
620 -AT+NOUD :  Get or Set the number of data to be uploaded
767 +AT+NOUD      : Get or Set the number of data to be uploaded
621 621  
622 622  AT+CDP     :  Read or Clear cached data
623 623  
624 -AT+DEBUG:  Enable or Disable debug mode
771 +AT+ DEBUG   : Enable or Disable debug mode
625 625  
626 -AT+ALARM1:  Get or Set alarm of distance1
773 +AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
627 627  
628 -AT+ALARM2:  Get or Set alarm of distance2
775 +AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
629 629  
630 -AT+GETSENSORVALUE :  Returns the current sensor measurement
777 +AT+COUNTMOD  :  Get or Set the count mode
631 631  
632 -AT+POWERIC :  Get or set the Power IC flag
779 +AT+TTRCHANNEL  : Get or Set the number of interrupt channels
633 633  
781 +AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
634 634  
783 +AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
784 +
785 +AT+ CLRC   :  Clear current door open count
786 +
787 +
635 635  (% style="color:blue" %)**COAP Management**      
636 636  
637 -AT+URI :  Resource parameters
790 +AT+URI            : Resource parameters
638 638  
639 639  
640 640  (% style="color:blue" %)**UDP Management**
641 641  
642 -AT+CFM :  Upload confirmation mode (only valid for UDP)
795 +AT+CFM          : Upload confirmation mode (only valid for UDP)
643 643  
644 644  
645 645  (% style="color:blue" %)**MQTT Management**
646 646  
647 -AT+CLIENT  : Get or Set MQTT client
800 +AT+CLIENT               : Get or Set MQTT client
648 648  
649 -AT+UNAME : Get or Set MQTT Username
802 +AT+UNAME  : Get or Set MQTT Username
650 650  
651 -AT+PWD  :  Get or Set MQTT password
804 +AT+PWD                  : Get or Set MQTT password
652 652  
653 -AT+PUBTOPIC :  Get or Set MQTT publish topic
806 +AT+PUBTOPIC  : Get or Set MQTT publish topic
654 654  
655 -AT+SUBTOPIC :  Get or Set MQTT subscription topic
808 +AT+SUBTOPIC  : Get or Set MQTT subscription topic
656 656  
657 657  
658 658  (% style="color:blue" %)**Information**          
659 659  
660 -AT+FDR :  Factory Data Reset
813 +AT+FDR  : Factory Data Reset
661 661  
662 -AT+PWORD :  Serial Access Password
815 +AT+PWORD  : Serial Access Password
663 663  
664 664  
665 665  = ​5.  FAQ =
... ... @@ -671,7 +671,7 @@
671 671  
672 672  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
673 673  
674 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NMDS200** (%%)**and (% style="color:blue" %)LMDS200(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
827 +(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
675 675  
676 676  
677 677  = 6.  Trouble Shooting =
... ... @@ -691,7 +691,7 @@
691 691  = 7. ​ Order Info =
692 692  
693 693  
694 -Part Number:(% style="color:blue" %)** NMDS200**
847 +Part Number**:** NDS03A
695 695  
696 696  
697 697  = 8.  Packing Info =
... ... @@ -699,9 +699,10 @@
699 699  
700 700  (% style="color:blue" %)**Package Includes**:
701 701  
702 -* NMDS200 NB-IoT Microwave Radar Distance Sensor x 1
855 +* NDS03A Open/Close Door Sensor x 1
703 703  
704 704  
858 +
705 705  = 9.  Support =
706 706  
707 707  
1670404362039-351.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -492.6 KB
Content
1670405841875-916.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.1 KB
Content
1670405928926-116.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.7 KB
Content
1670406036256-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -181.0 KB
Content
1670406261143-723.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.9 KB
Content
1670407401682-959.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -23.7 KB
Content
1670408172929-569.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -211.8 KB
Content
LMDS200_10.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
image-20221207170748-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -26.1 KB
Content
image-20221207170748-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.9 KB
Content
image-20221207173200-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.7 KB
Content
image-20221207173300-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.0 KB
Content
image-20221208090742-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.7 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0