Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -366,13 +366,13 @@
366	366
367	367	Specify the software version: 0x64=100, which means firmware version 1.00.
368	368
369		-For example 0x00 64 : This device is NMDS200 1 with firmware version 1.0.0.
	369	+For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
370	370
371	371
372	372	=== 2.4.3  Battery Info ===
373	373
374	374
375		-Check the battery voltage for NMDS200.
	375	+Check the battery voltage for NDS03A.
376	376
377	377	Ex1: 0x0B45 = 2885mV
378	378
...	...	@@ -397,31 +397,34 @@
397	397	**99**    Not known or not detectable
398	398
399	399
400		-=== 2.4.5  Distance ===
	400	+=== 2.4.5  Disalarm: (default: 0) ===
401	401
402	402
403		-[[image:1670407401682-959.png]]
	403	+(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
404	404
405		-**(% style="color:blue" %)Object1 Distance:**
	405	+(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
406	406
407		-Distance between sensor probe to the first object. (unit: cm)
	407	+ (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
408	408
409		-For example, if the data you get from the register is 0x02 0x05, the distance between the sensor and the measured object is
410	410
411		-**(% style="color:blue" %)0205(H) = 517 (D) = 517 cm.**
	410	+=== 2.4.6  Keep Status & Keep Time ===
412	412
413	413
414		-**(% style="color:blue" %)Object2 Distance:**
	413	+Shows the configure value of Alarm Base on Timeout Feature
415	415
416		-Distance between sensor probe to the second object. (unit: cm)
417	417
	416	+=== 2.4.7  Timestamp ===
418	418
419		-=== 2.4.6  Timestamp ===
420	420
421		-
422	422	Timestamp : 0x6315537b =1662342011
423	423
424	424
	422	+=== 2.4.8  Switch Dual Channel Mode ===
	423	+
	424	+
	425	+NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
	426	+
	427	+
425	425	== 2.5  Downlink Payload ==
426	426
427	427