Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 81.1 >
edited by Xiaoling
on 2022/12/07 18:03
To version < 30.1 >
edited by David Huang
on 2022/10/21 11:20
>
Change comment: Uploaded new attachment "image-20221021112006-28.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,48 +1,36 @@
1 1  (% style="text-align:center" %)
2 -[[image:LMDS200_10.jpg]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png"]]
3 3  
4 4  
5 -**Table of Contents：**
5 +**~1. Introduction**
6 6  
7 +**1.1 ​**What is CPN01 **NB-IOT** Pulse/Contact Sensor
7 7  
9 +The Dragino CPL01 is a **NB-IOT Contact Sensor**. It detects open/close status and uplink to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
8 8  
11 +The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
9 9  
13 +CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open for a certain time.
10 10  
11 -= 1.  Introduction =
15 +CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
12 12  
13 -== 1.1 ​ What is NMDS200 NB-IoT Microwave Radar Distance Sensor ==
17 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
18 +\\CPN01 supports different uplink methods include **TCP,MQTT,UDP and CoAP  **for different application requirement.
19 +\\CPN01 is powered by  **8500mAh Li-SOCI2 battery**, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
20 +\\To use CPN01, user needs to check if there is NB-IoT coverage in local area and with the bands CPN01 supports. If the local operate support it, user needs to get a **NB-IoT SIM card** from local operator and install CPN01 to get NB-IoT network connection
14 14  
22 +​
15 15  
16 -(((
17 -The Dragino NMDS200 is a(% style="color:blue" %)** NB-IoT Microwave Radar distance sensor**(%%). It uses (% style="color:blue" %)**24Ghz Microwave**(%%) to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is (% style="color:blue" %)**more reliable for condensation / dusty environment**(%%). It can sense correct distance even there is water or thick dust on top of the sensor.
18 18  
25 +**​1.2 Features**
19 19  
20 -The NMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
21 -
22 -NMDS200 can (% style="color:blue" %)**measure two distances**(%%): the closest object and next object behind the closest one.
23 -
24 -NMDS200 (% style="color:blue" %)**supports Alarm Feature**(%%), user can set the NMDS200 to uplink data in a short interval when the distance is out of configured range.
25 -
26 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
27 -
28 -NMDS200 (% style="color:blue" %)**supports different uplink**(%%) methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
29 -
30 -NMDS200 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**,(%%) It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
31 -
32 -To use NMDS200, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NMDS200 supports. If local operator support it, user needs to get a** (% style="color:blue" %)NB-IoT SIM card(%%)** from the operator and install into NMDS200 to get NB-IoT network connection.
33 -)))
34 -
35 -
36 -
37 -== ​1.2  Features ==
38 -
39 -
40 40  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
41 -* Short uplink interval for Distance Alarm
28 +* Open/Close detect
29 +* Open/Close statistics
42 42  * Monitor Battery Level
43 -* Microwave Radar for distance detection
31 +* Uplink on periodically and open/close event
44 44  * Datalog feature
45 -* Uplink periodically
33 +* Uplink on periodically
46 46  * Downlink to change configure
47 47  * Wall Mountable
48 48  * Outdoor Use
... ... @@ -49,339 +49,279 @@
49 49  * Ultra-Low Power consumption
50 50  * AT Commands to change parameters
51 51  * Micro SIM card slot for NB-IoT SIM
52 -* 8500mAh Battery for long-term use
40 +* 8500mAh Battery for long term use
53 53  
42 +**1.3  Specification**
54 54  
55 -== 1.3 Radar probe specification ==
44 +**Common DC Characteristics:**
56 56  
46 +* Supply Voltage: 2.1v ~~ 3.6v
47 +* Operating Temperature: -40 ~~ 85°C
57 57  
58 -* Measuring Method: FMCW
59 -* Frequency: 24.000 24.500 GHz
60 -* Measurement output power: 6dBm
61 -* Measure range: 0.5 20m
62 -* Accuracy: ±0.1m
63 -* Resolution: 0.01m
64 -* Horizontal Angel: 78°
65 -* Vertical Angel: 23°
49 +**NB-IoT Spec:**
66 66  
51 +* - B1 @H-FDD: 2100MHz
52 +* - B3 @H-FDD: 1800MHz
53 +* - B8 @H-FDD: 900MHz
54 +* - B5 @H-FDD: 850MHz
55 +* - B20 @H-FDD: 800MHz
56 +* - B28 @H-FDD: 700MHz
67 67  
58 +**1.4 Installation**
68 68  
69 -== 1.4  Storage Temperature ==
60 +Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
70 70  
62 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png]] [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image002.png]] ​
71 71  
72 - -40°C to +85°C
64 +**1.5 ​Applications**
73 73  
66 +* Open/Close Detection
67 +* Pulse meter application
68 +* Dry Contact Detection
74 74  
70 +**1.6 Mechanical**
75 75  
72 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image003.png]]
76 76  
74 +**~ 1.7 Pin Definitions and Switch**
77 77  
78 -== 1.5 ​ Applications ==
76 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image004.png]]
79 79  
78 +**1.7.1 Pin Definition**
80 80  
80 +CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
81 81  
82 -* Horizontal distance measurement
83 -* Liquid level measurement
84 -* Parking management system
85 -* Object proximity and presence detection
86 -* Intelligent trash can management system
87 -* Robot obstacle avoidance
88 -* Automatic control
89 -* Sewer
90 -* Bottom water level monitoring
82 +**1.7.2 Jumper JP2(Power ON/OFF)**
91 91  
92 92  
93 -== 1.6  Specification ==
85 +Power on Device when putting this jumper.
94 94  
95 95  
96 -(% style="color:blue" %)**Common DC Characteristics:**
97 97  
98 -* Supply Voltage: 2.1v ~~ 3.6v
99 -* Operating Temperature: 0 ~~ 70°C
89 +**1.7.3 BOOT MODE / SW1**
100 100  
101 -(% style="color:blue" %)**NB-IoT Spec:**
102 102  
103 -* B1 @H-FDD: 2100MHz
104 -* B3 @H-FDD: 1800MHz
105 -* B8 @H-FDD: 900MHz
106 -* B5 @H-FDD: 850MHz
107 -* B20 @H-FDD: 800MHz
108 -* B28 @H-FDD: 700MHz
92 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
109 109  
94 +2) Flash: work mode, the device starts to work and send out console output for further debug
110 110  
111 -== 1.7  Installation ==
112 112  
113 113  
114 -Sensor measure direction and angle is as below. When install the sensor, please make sure the sensor direct to object.
98 +**1.7.4 Reset Button**
115 115  
116 116  
117 -[[image:image-20221207170748-1.png]] [[image:image-20221207170748-2.png||height="366" width="672"]]
101 +Press to reboot the device.
118 118  
119 119  
120 120  
121 -== 1.8  Pin Definitions and Switch ==
105 +**1.7.5 LED**
122 122  
123 123  
124 -[[image:1670404362039-351.png]]
108 +It will flash:
125 125  
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
126 126  
127 -= 2.  Use NMDS200 to communicate with IoT Server =
128 128  
129 -== 2.1  How it works ==
114 +**2.  Use CPN01 to communicate with IoT Server**
130 130  
116 +**2.1  How it works**
131 131  
132 -The NB-IoT network will forward this value to IoT server via the protocol defined by NMDS200.
118 +The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
133 133  
134 -The diagram below shows the working flow in the default firmware of NMDS200:
120 +The diagram below shows the working flow in default firmware of CPN01:
135 135  
136 -[[image:image-20221021110615-5.png]]
122 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image005.png||alt="说明: image-20220708101605-2.png"]]
137 137  
124 +**2.2 ​ Configure the CPN01**
138 138  
139 -== 2.2 ​ Configure NMDS200 ==
126 +**2.2.1 Test Requirement**
140 140  
128 +To use CPN01 in your city, make sure meet below requirements:
141 141  
142 -To use NMDS200 in your city, make sure to meet below requirements:
143 -
144 -* Your local operator has already distributed an NB-IoT Network.
145 -* The local NB-IoT network used the band that NMDS200 supports.
130 +* Your local operator has already distributed a NB-IoT Network there.
131 +* The local NB-IoT network used the band that CPN01 supports.
146 146  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
147 147  
148 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NMDS200 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
149 149  
150 -[[image:image-20221207173300-4.png]]
136 + ​
151 151  
138 +**2.2.2 Insert SIM card**
152 152  
153 -=== 2.2.1 Insert NB-IoT SIM card ===
154 -
155 -
156 156  Insert the NB-IoT Card get from your provider.
157 157  
158 -User needs to take out the NB-IoT module and insert the SIM card like below:
142 +User need to take out the NB-IoT module and insert the SIM card like below:
159 159  
160 -[[image:image-20221021110745-6.png]] ​
144 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image006.png||alt="说明: 1657249468462-536.png"]] ​
161 161  
146 +**2.2.3 Connect USB – TTL to CPN01 to configure it**
162 162  
163 -=== 2.2.2 Connect USB – TTL to NMDS200 and configure it ===
148 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
164 164  
150 +**Connection:**
165 165  
166 -User need to configure NMDS200 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NMDS200 support AT Commands, user can use a USB to TTL adapter to connect to NMDS200 and use AT Commands to configure it, as below.
152 + USB TTL GND <~-~-~-~-> GND
167 167  
168 -(% style="color:blue" %)**Connection:**
154 + USB TTL TXD <~-~-~-~-> UART_RXD
169 169  
170 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
156 + USB TTL RXD <~-~-~-~-> UART_TXD
171 171  
172 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
173 -
174 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
175 -
176 -
177 177  In the PC, use below serial tool settings:
178 178  
179 -* Baud:  (% style="color:red" %)**9600**
160 +* Baud:  **9600**
161 +* Data bits:** 8**
162 +* Stop bits: **1**
163 +* Parity:  **None**
164 +* Flow Control: **None**
180 180  
181 -* Data bits:** (% style="color:red" %)8(%%)**
166 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
182 182  
183 -* Stop bits: (% style="color:red" %)**1**
168 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image007.png]]
184 184  
185 -* Parity:  (% style="color:red" %)**None**
170 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
186 186  
187 -* Flow Control: (% style="color:red" %)**None**
172 +**2.2.4 Use CoAP protocol to uplink data**
188 188  
189 -Make sure the switch is in FLASH position, then power on NMDS200 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
174 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
190 190  
191 -​[[image:image-20221021110817-7.png]]
176 +**Use below commands:**
192 192  
193 -NMDS200 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
178 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
179 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
180 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
194 194  
195 -
196 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
197 -
198 -
199 -
200 -=== 2.2.3 Use CoAP protocol to uplink data ===
201 -
202 -
203 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
204 -
205 -
206 -(% style="color:blue" %)**Use below commands in NDS03A:**
207 -
208 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
209 -
210 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
211 -
212 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
213 -
214 214  For parameter description, please refer to AT command set
215 215  
216 -[[image:image-20221021110948-8.png]]
184 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image008.png]]
217 217  
186 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
218 218  
219 -After configuring the server address and (% style="color:green" %)**reset NMDS200**(%%) (via AT+ATZ ), NMDS200 will start to uplink sensor values to the CoAP server.
188 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image009.png]] ​
220 220  
221 -[[image:1670405841875-916.png]] ​
190 +**2.2.5 Use UDP protocol to uplink data(Default protocol)**
222 222  
192 +This feature is supported since firmware version v1.0.1
223 223  
224 -=== 2.2.4 Use UDP protocol to uplink data(Default protocol) ===
194 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
195 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
196 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
225 225  
198 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image010.png]]
226 226  
227 -(% style="color:blue" %)**AT Commands:**
200 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image011.png||alt="说明: 1657249930215-289.png"]]
228 228  
229 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
230 -
231 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
232 -
233 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
234 -
235 -​ [[image:image-20221021111025-10.png]]
236 -
237 -
238 -[[image:image-20221021111033-11.png||height="241" width="576"]]
239 -
240 240  ​
241 241  
242 -=== 2.2.5 Use MQTT protocol to uplink data ===
204 +**2.2.6 Use MQTT protocol to uplink data**
243 243  
206 +This feature is supported since firmware version v110
244 244  
245 -(% style="color:blue" %)**AT Commands:**
208 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
209 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
210 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
211 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
212 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
213 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
214 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
246 246  
247 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
216 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image012.png]]
248 248  
249 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
218 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image013.png]]
250 250  
251 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
252 -
253 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
254 -
255 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
256 -
257 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
258 -
259 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
260 -
261 -​ [[image:image-20221118103445-7.png]]
262 -
263 -
264 -[[image:1670405928926-116.png]]
265 -
266 266  ​
267 267  
268 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
222 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
269 269  
224 +**2.2.7 Use TCP protocol to uplink data**
270 270  
271 -=== 2.2.6 Use TCP protocol to uplink data ===
226 +This feature is supported since firmware version v110
272 272  
228 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
229 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
273 273  
274 -(% style="color:blue" %)**AT Commands:**
231 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image014.png]]
275 275  
276 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
233 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image015.png||alt="说明: 1657250255956-604.png"]]
277 277  
278 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
279 -
280 -​ [[image:1670406036256-101.png||height="676" width="713"]]
281 -
282 -
283 -[[image:image-20221021111131-15.png]]
284 -
285 285  ​
286 286  
287 -=== 2.2.7 Change Update Interval ===
237 +**2.2.8 Change Update Interval**
288 288  
239 +User can use below command to change the **uplink interval**.
289 289  
290 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
241 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
291 291  
292 -* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (4 hours)
243 +**NOTE:**
293 293  
294 -(% style="color:red" %)**NOTE:**
245 +**~1. By default, the device will send an uplink message every 1 hour.**
295 295  
296 -1.  By default, the device will send an uplink message every 4 hour.
247 +**2.3  Uplink Payload**
297 297  
249 +In this mode, uplink payload includes 87 bytes in total by default.
298 298  
299 -== 2.3  Uplink Payload ==
251 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
300 300  
253 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
254 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
301 301  
302 -The uplink payload includes 23 bytes in total by default.
303 303  
304 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
257 +|2|2|4|8 group
258 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
305 305  
260 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
306 306  
307 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
308 -|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:50px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**2**
309 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Exit flag|(% style="width:94px" %) Distance 1 |(% style="width:93px" %) Distance  2
262 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image016.png]]
310 310  
311 -(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
312 -|(% style="width:50px" %)**4**|(% style="width:90px" %)**2**|(% style="width:90px" %)**2**|(% style="width:60px" %)**4**|(% style="width:50px" %)(((
313 -**1-32 group**
314 -)))
315 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]| Distance 1 | Distance  2|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
264 +The payload is ASCII string, representative same HEX:
316 316  
317 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NMDS200 uplink data.
266 +0xf86778705021331700640c7817010001000000090000026315537b 0100000b02000002663510fed0100000e0200000263510f39010000000000000063510e85010000000000000063510d2e010000000000000063510c7a010000000000000063510bc6010000000000000063510954010000000000000063510882 where:
318 318  
319 -[[image:1670406261143-723.png]]
268 +* **Device ID: 0x f867787050213317 = f867787050213317**
269 +* **Version: 0x0064=100=1.0.0**
320 320  
271 +* **BAT: 0x0c78 = 3192 mV = 3.192V**
272 +* **Singal: 0x17 = 23**
273 +* **Mod: 0x01 = 1**
274 +* **Calculate Flag: 0x00= 0**
275 +* **Contact Status: 0x00= 0**
276 +* **Alarm:0x00 =0**
277 +* **Total pulse:0x09 =0**
278 +* **The last open duration:0x02 =2**
279 +* **Time stamp : 0x6315537b =1662342011**
280 +* **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000b0200002663510fed**
281 +* **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000e0200002663510f39,.......**
321 321  
322 -The payload is ASCII string, representative same HEX: f867787050471071  0064  0cc3  09  01  00 00ef  013d  6390453d
283 +**2.4  Payload Explanation and Sensor Interface**
323 323  
324 -**0x (% style="color:red" %)__f867787050471071__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0cc3__(% style="color:#00b0f0" %) 0__9__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00ef__(% style="color:#660066" %) (% style="color:#663300" %)__013d__ (% style="color:#d60093" %)__6390453d__(%%)**
285 +**2.4.1  Device ID**
325 325  
326 -**where:**
287 +By default, the Device ID equal to the last 15 bits of IMEI.
327 327  
328 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050471071 = f867787050471071
289 +User can use **AT+DEUI** to set Device ID
329 329  
330 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
331 -
332 -* (% style="color:#037691" %)**BAT :**(%%)  0x0cc3 = 3267 mV = 3.267V
333 -
334 -* (% style="color:#037691" %)**Singal: **(%%)0x09 = 9
335 -
336 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
337 -
338 -* (% style="color:#037691" %)**Exit flag: **(%%)0x00 =0
339 -
340 -* (% style="color:#037691" %)**Distance 1: **(%%)0x00ef=239
341 -
342 -* (% style="color:#037691" %)**Distance 2: **(%%)0x013d =317
343 -
344 -* (% style="color:#037691" %)**Timestamp: **(%%)0x6390453d =1670399293 (Unix Time)
345 -
346 -
347 -
348 -== 2.4  Payload Explanation and Sensor Interface ==
349 -
350 -=== 2.4.1  Device ID ===
351 -
352 -
353 -By default, the Device ID is equal to the last 15 bits of IMEI.
354 -
355 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
356 -
357 357  **Example:**
358 358  
359 359  AT+DEUI=868411056754138
360 360  
361 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
295 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
362 362  
297 +**2.4.2  Version Info**
363 363  
364 -=== 2.4.2  Version Info ===
299 +Specify the software version: 0x64=100, means firmware version 1.00.
365 365  
301 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
366 366  
367 -Specify the software version: 0x64=100, which means firmware version 1.00.
303 +**2.4.3  Battery Info**
368 368  
369 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
305 +Check the battery voltage for CPN01.
370 370  
371 -
372 -=== 2.4.3  Battery Info ===
373 -
374 -
375 -Check the battery voltage for NDS03A.
376 -
377 377  Ex1: 0x0B45 = 2885mV
378 378  
379 379  Ex2: 0x0B49 = 2889mV
380 380  
311 +**2.4.4  Signal Strength**
381 381  
382 -=== 2.4.4  Signal Strength ===
383 -
384 -
385 385  NB-IoT Network signal Strength.
386 386  
387 387  **Ex1: 0x1d = 29**
... ... @@ -396,46 +396,58 @@
396 396  
397 397  **99**    Not known or not detectable
398 398  
327 +**2.4.5 Calculate Flag**
399 399  
400 -=== 2.4.5  Disalarm: (default: 0) ===
329 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
401 401  
331 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
402 402  
403 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
333 +Default value: 0. 
404 404  
405 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
335 +Range (6 bits): (b)000000 ~~ (b) 111111
406 406  
407 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
337 +**2.4.6  Alarm**
408 408  
339 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
409 409  
410 -=== 2.4.6  Keep Status & Keep Time ===
341 +**2.4.7 Contact Status**
411 411  
343 +0: Open
412 412  
413 -Shows the configure value of Alarm Base on Timeout Feature
345 +1: Close
414 414  
347 +**2.4.8 Total pulse**
415 415  
416 -=== 2.4.7  Timestamp ===
349 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
417 417  
351 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
418 418  
419 -Timestamp : 0x6315537b =1662342011
353 +**2.4.9 The last open duration**
420 420  
355 +Dry Contact last open duration.
421 421  
422 -=== 2.4.8  Switch Dual Channel Mode ===
357 +Unit: min.
423 423  
359 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image017.png]]
424 424  
425 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
426 426  
362 +**2.4.10  Timestamp**
427 427  
428 -== 2.5  Downlink Payload ==
364 +Time stamp : 0x6315537b =1662342011
429 429  
366 +Convert Unix timestamp to time 2022-9-5 9:40:11.
430 430  
431 -By default, NDS03A prints the downlink payload to console port.
368 +**~ **
432 432  
433 -[[image:image-20221021111414-18.png]] ​
370 +**2.5  Downlink Payload**
434 434  
372 +By default, CPN01 prints the downlink payload to console port.
435 435  
374 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image018.png||alt="说明: image-20220708133731-5.png"]] ​
375 +
436 436  **Examples:**
437 437  
438 -* (% style="color:#037691" %)**Set TDC**
378 +* **Set TDC**
439 439  
440 440  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
441 441  
... ... @@ -443,221 +443,178 @@
443 443  
444 444  Payload:    01 00 00 3C    TDC=60S
445 445  
446 -* (% style="color:#037691" %)**Reset**
386 +* **Reset**
447 447  
448 -If payload = 0x04FF, it will reset the NDS03A
388 +If payload = 0x04FF, it will reset the NSE01
449 449  
450 -* (% style="color:#037691" %)**INTMOD**
390 +* **INTMOD**
451 451  
452 452  Downlink Payload: 06000003, Set AT+INTMOD=3
453 453  
394 +**2.6  ​LED Indicator**
454 454  
455 -== 2.6  ​LED Indicator ==
396 +The CPN01 has an internal LED which is to show the status of different state.
456 456  
457 -
458 -The NDS03A has an internal LED which is to show the status of different states.
459 -
460 -* When the device starts normally, the LED will light up for 1 second.
461 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
398 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
399 +* Then the LED will be on for 1 second means device is boot normally.
400 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
462 462  * For each uplink probe, LED will be on for 500ms.
463 463  
464 -== 2.7  Alarm Base on Timeout ==
403 +**2.7 ** Alarm Base on Timeout
465 465  
405 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
466 466  
467 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
468 468  
408 +**~1. Keep Status: Status to be monitor**
469 469  
470 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
471 -
472 472  Keep Status = 1: Monitor Close to Open event
473 473  
474 474  Keep Status = 0: Monitor Open to Close event
475 475  
476 476  
477 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
415 +**2. Keep Time: Timeout to send an Alarm**
478 478  
479 479  Range 0 ~~ 65535(0xFFFF) seconds.
480 480  
481 481  If keep time = 0, Disable Alarm Base on Timeout feature.
482 482  
483 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
421 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
484 484  
485 485  
486 -(% style="color:blue" %)**AT Command to configure:**
424 +**AT Command** to configure:
487 487  
488 -(% style="color:blue" %)**PB14 PIN:**
426 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
489 489  
490 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
428 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
491 491  
492 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
430 +**2.8** Set debug mode
493 493  
494 -
495 -(% style="color:blue" %)**PB15 PIN:**
496 -
497 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
498 -
499 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
500 -
501 -
502 -== 2.8  Set debug mode ==
503 -
504 -
505 505  Feature: Enable or Disable debug mode
506 506  
507 -(% style="color:blue" %)**AT Command: AT+DEBUG**
508 508  
509 -[[image:image-20221021111629-21.png]]
435 +**AT Command: AT+DEBUG**
510 510  
437 +|**Command Example**|**Function**|**Response**
438 +|AT+DEBUG =0|Disable debug mode to 0|OK
439 +|AT+ DEBUG =1|Enable debug mode to 1|OK
511 511  
441 +== 2.9 Clear Flash Record ==
512 512  
513 -== 2.9  Clear Flash Record ==
514 -
515 -
516 516  Feature: Clear flash storage for data log feature.
517 517  
518 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
445 +**AT Command: AT+CLRDTA**
519 519  
520 -[[image:image-20221021111527-19.png]]
447 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image019.png||alt="说明: image-20220609151132-7.png"]]
521 521  
449 +**~ 2.10 **Set trigger mode
522 522  
523 -== 2.10  Count Mod ==
451 +➢ AT Command: **AT+TTRMOD**
524 524  
453 +Feature: Set the trigger interrupt mode.
525 525  
526 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
455 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image020.png||alt="说明: image-20220609151344-9.png"]]
527 527  
528 -[[image:image-20221118092935-1.png]]
457 +**2.11** Set the calculate flag
529 529  
459 +Feature: Set the calculate flag
530 530  
531 -== 2.11  Interrupt Pin Channel Mod ==
461 +**AT Command: AT+CALCFLAG**
532 532  
463 +|**Command Example**|**Function**|**Response**
464 +|AT+CALCFLAG =1|Set the calculate flag to 1.|OK
465 +|AT+CALCFLAG =2|Set the calculate flag to 2.|OK
533 533  
534 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
467 +**2.12** Set count number
535 535  
536 -[[image:image-20221118093144-2.png]]
469 +Feature: Manually set the count number
537 537  
471 +**AT Command: AT+SETCNT**
538 538  
539 -== 2.12 TTRIG1/2 timeout status alarm ==
473 +|**Command Example**|**Function**|**Response**
474 +|AT+ SETCNT =0|Set the count number to 0.|OK
475 +|AT+ SETCNT =100|Set the count number to 100.|OK
540 540  
541 541  
542 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
478 +**2.13 Set the number of data to be uploaded and the recording time**
543 543  
544 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
480 +➢ AT Command:
545 545  
546 -[[image:image-20221118093512-3.png]]
482 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
547 547  
548 548  
549 -== 2.13  Select counting mode ==
485 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
550 550  
487 +**2.14 Read or Clear cached data**
551 551  
552 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
489 +➢ AT Command:
553 553  
554 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
491 +AT+CDP    ~/~/ Read cached data
555 555  
556 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
493 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image021.png]]
557 557  
558 -[[image:image-20221118093658-4.png]]
559 559  
496 +AT+CDP=0    ~/~/ Clear cached data ​
560 560  
561 -== 2.14  Set the number of data to be uploaded and the recording time ==
498 +**2.15  ​Firmware Change Log**
562 562  
500 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
563 563  
564 -(% style="color:blue" %)**AT Command:**
502 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
565 565  
566 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
504 +**2.16  ​Battery Analysis**
567 567  
568 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
506 +**2.16.1  ​Battery Type**
569 569  
508 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
570 570  
571 -== 2.15  Read or Clear cached data ==
510 +The battery is designed to last for several years depends on the actually use environment and update interval. 
572 572  
512 +The battery related documents as below:
573 573  
574 -(% style="color:blue" %)**AT Command:**
575 -
576 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
577 -
578 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
579 -
580 -[[image:image-20221118094227-5.png]]
581 -
582 -
583 -== 2.16  ​Firmware Change Log ==
584 -
585 -
586 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
587 -
588 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
589 -
590 -
591 -== 2.17  ​Battery Analysis ==
592 -
593 -=== 2.17.1  ​Battery Type ===
594 -
595 -
596 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
597 -
598 -The battery is designed to last for several years depends on the actual use environment and update interval. 
599 -
600 -The battery-related documents as below:
601 -
602 602  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
603 -
604 604  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
605 -
606 606  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
607 607  
608 -[[image:image-20221021111911-26.png]] ​
518 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image022.png||alt="说明: image-20220708140453-6.png"]] ​
609 609  
520 +**2.16.2  Power consumption Analyze**
610 610  
611 -=== 2.17.2  Power consumption Analyze ===
612 -
613 -
614 614  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
615 615  
616 616  Instruction to use as below:
617 617  
618 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
526 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
619 619  
620 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
528 +**Step 2: ** Open it and choose
621 621  
622 622  * Product Model
623 -
624 624  * Uplink Interval
625 -
626 626  * Working Mode
627 627  
628 628  And the Life expectation in difference case will be shown on the right.
629 629  
630 -[[image:1666596205057-567.png]] ​
536 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image023.jpg||alt="说明: image-20220708141352-7.jpeg"]] ​
631 631  
538 +**2.16.3  ​Battery Note**
632 632  
633 -=== 2.17.3  ​Battery Note ===
634 -
635 -
636 636  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
637 637  
542 +**2.16.4  Replace the battery**
638 638  
639 -=== 2.17.4  Replace the battery ===
544 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
640 640  
546 +**3. ​ Access NB-IoT Module**
641 641  
642 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
643 -
644 -
645 -= 3. ​ Access NB-IoT Module =
646 -
647 -
648 648  Users can directly access the AT command set of the NB-IoT module.
649 649  
650 650  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
651 651  
552 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image024.png||alt="说明: 1657261278785-153.png"]] ​
652 652  
653 -[[image:image-20221118094449-6.png]] ​
554 +**4.  Using the AT Commands**
654 654  
556 +**4.1  Access AT Commands**
655 655  
656 -= 4.  Using the AT Commands =
657 -
658 -== 4.1  Access AT Commands ==
659 -
660 -
661 661  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
662 662  
663 663  AT+<CMD>?  : Help on <CMD>
... ... @@ -668,9 +668,8 @@
668 668  
669 669  AT+<CMD>=?  : Get the value
670 670  
568 +**General Commands**      
671 671  
672 -(% style="color:blue" %)**General Commands**      
673 -
674 674  AT  : Attention       
675 675  
676 676  AT?  : Short Help     
... ... @@ -693,41 +693,35 @@
693 693  
694 694  AT+SERVADDR  : Server Address
695 695  
696 -AT+TR      :  Get or Set record time
592 +AT+TR      : Get or Set record time"
697 697  
594 +
698 698  AT+NOUD      : Get or Set the number of data to be uploaded
699 699  
700 -AT+CDP     :  Read or Clear cached data
701 701  
702 -AT+ DEBUG   : Enable or Disable debug mode
598 +AT+CDP     : Read or Clear cached data
703 703  
704 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
705 705  
706 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
601 +AT+ DEBUG   : Enable or Disable debug mode
707 707  
708 -AT+COUNTMOD  :  Get or Set the count mode
603 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
709 709  
710 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
605 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
711 711  
712 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
607 +AT+ CALCFLAG   : Get or Set the calculate flag
713 713  
714 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
609 +AT+ CLRC   : Clear current door open count
715 715  
716 -AT+ CLRC   :  Clear current door open count
611 +**COAP Management**      
717 717  
718 -
719 -(% style="color:blue" %)**COAP Management**      
720 -
721 721  AT+URI            : Resource parameters
722 722  
615 +**UDP Management**
723 723  
724 -(% style="color:blue" %)**UDP Management**
725 -
726 726  AT+CFM          : Upload confirmation mode (only valid for UDP)
727 727  
619 +**MQTT Management**
728 728  
729 -(% style="color:blue" %)**MQTT Management**
730 -
731 731  AT+CLIENT               : Get or Set MQTT client
732 732  
733 733  AT+UNAME  : Get or Set MQTT Username
... ... @@ -738,58 +738,86 @@
738 738  
739 739  AT+SUBTOPIC  : Get or Set MQTT subscription topic
740 740  
631 +**Information**          
741 741  
742 -(% style="color:blue" %)**Information**          
743 -
744 744  AT+FDR  : Factory Data Reset
745 745  
746 746  AT+PWORD  : Serial Access Password
747 747  
637 +**​5.  FAQ**
748 748  
749 -= ​5.  FAQ =
639 +**5.1 ​ How to Upgrade Firmware**
750 750  
751 -== 5.1 ​ How to Upgrade Firmware ==
752 -
753 -
754 754  User can upgrade the firmware for 1) bug fix, 2) new feature release.
755 755  
756 756  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
757 757  
758 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
645 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
759 759  
647 +**5.2  Can I calibrate CPN01 to different soil types?**
760 760  
761 -= 6.  Trouble Shooting =
649 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
762 762  
763 -== 6.1  ​Connection problem when uploading firmware ==
651 +**6.  Trouble Shooting**
764 764  
653 +**6.1  ​Connection problem when uploading firmware**
765 765  
766 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
655 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
767 767  
657 +**6.2  AT Command input doesn't work**
768 768  
769 -== 6.2  AT Command input doesn't work ==
659 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
770 770  
661 +**7. ​ Order Info**
771 771  
772 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
663 +Part Number**:** CPN01
773 773  
665 +**8.  Packing Info**
774 774  
775 -= 7. ​ Order Info =
667 +**Package Includes**:
776 776  
669 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
670 +* External antenna x 1
777 777  
778 -Part Number**:** NDS03A
672 +**Dimension and weight**:
779 779  
674 +* Size: 195 x 125 x 55 mm
675 +* Weight:   420g
780 780  
781 -= 8.  Packing Info =
677 +**9.  Support**
782 782  
679 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
680 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
783 783  
784 -(% style="color:blue" %)**Package Includes**:
682 +​
785 785  
786 -* NDS03A Open/Close Door Sensor x 1
787 787  
788 -= 9.  Support =
789 789  
790 790  
791 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
792 792  
793 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
794 794  
795 -​
689 +
690 +
691 +
692 +
693 +
694 +
695 +
696 +
697 +
698 +
699 +
700 +
701 +
702 +
703 +
704 +
705 +
706 +
707 +
708 +
709 +
710 +
711 +
712 +
713 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
1670404362039-351.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -492.6 KB
Content
1670405841875-916.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.1 KB
Content
1670405928926-116.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.7 KB
Content
1670406036256-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -181.0 KB
Content
1670406261143-723.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.9 KB
Content
1670407401682-959.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -23.7 KB
Content
LMDS200_10.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content
image-20221207170748-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -26.1 KB
Content
image-20221207170748-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.9 KB
Content
image-20221207173200-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.7 KB
Content
image-20221207173300-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0