Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 80.2 >
edited by Xiaoling
on 2022/12/07 18:00
To version < 40.1 >
edited by Edwin Chen
on 2022/10/23 00:07
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,46 +1,34 @@
1 1  (% style="text-align:center" %)
2 -[[image:LMDS200_10.jpg]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 +{{toc/}}
4 4  
5 -**Table of Contents：**
6 += **1. Introduction** =
6 6  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
7 7  
10 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
8 8  
12 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
9 9  
14 +CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
10 10  
11 -= 1.  Introduction =
16 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
12 12  
13 -== 1.1 ​ What is NMDS200 NB-IoT Microwave Radar Distance Sensor ==
18 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
19 +\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
20 +\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
21 +\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
14 14  
23 +​
15 15  
16 -(((
17 -The Dragino NMDS200 is a(% style="color:blue" %)** NB-IoT Microwave Radar distance sensor**(%%). It uses (% style="color:blue" %)**24Ghz Microwave**(%%) to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is (% style="color:blue" %)**more reliable for condensation / dusty environment**(%%). It can sense correct distance even there is water or thick dust on top of the sensor.
25 +== **​1.2 Features** ==
18 18  
19 -
20 -The NMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
21 -
22 -NMDS200 can (% style="color:blue" %)**measure two distances**(%%): the closest object and next object behind the closest one.
23 -
24 -NMDS200 (% style="color:blue" %)**supports Alarm Feature**(%%), user can set the NMDS200 to uplink data in a short interval when the distance is out of configured range.
25 -
26 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
27 -
28 -NMDS200 (% style="color:blue" %)**supports different uplink**(%%) methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
29 -
30 -NMDS200 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**,(%%) It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
31 -
32 -To use NMDS200, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NMDS200 supports. If local operator support it, user needs to get a** (% style="color:blue" %)NB-IoT SIM card(%%)** from the operator and install into NMDS200 to get NB-IoT network connection.
33 -)))
34 -
35 -
36 -
37 -== ​1.2  Features ==
38 -
39 -
40 40  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
41 -* Short uplink interval for Distance Alarm
28 +* Open/Close detect
29 +* Open/Close statistics
42 42  * Monitor Battery Level
43 -* Microwave Radar for distance detection
31 +* Uplink on periodically and open/close event
44 44  * Datalog feature
45 45  * Uplink periodically
46 46  * Downlink to change configure
... ... @@ -51,108 +51,107 @@
51 51  * Micro SIM card slot for NB-IoT SIM
52 52  * 8500mAh Battery for long-term use
53 53  
42 +== **1.3  Specification** ==
54 54  
55 -== 1.3 Radar probe specification ==
44 +**Common DC Characteristics:**
56 56  
46 +* Supply Voltage: 2.1v ~~ 3.6v
47 +* Operating Temperature: -40 ~~ 85°C
57 57  
58 -* Measuring Method: FMCW
59 -* Frequency: 24.000 24.500 GHz
60 -* Measurement output power: 6dBm
61 -* Measure range: 0.5 20m
62 -* Accuracy: ±0.1m
63 -* Resolution: 0.01m
64 -* Horizontal Angel: 78°
65 -* Vertical Angel: 23°
49 +**NB-IoT Spec:**
66 66  
51 +* - B1 @H-FDD: 2100MHz
52 +* - B3 @H-FDD: 1800MHz
53 +* - B8 @H-FDD: 900MHz
54 +* - B5 @H-FDD: 850MHz
55 +* - B20 @H-FDD: 800MHz
56 +* - B28 @H-FDD: 700MHz
67 67  
58 +== **1.4 Installation** ==
68 68  
69 -== 1.4  Storage Temperature ==
60 +Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
70 70  
62 +[[image:image-20221021110329-1.png]]
71 71  
72 - -40°C to +85°C
64 +[[image:image-20221022234602-2.png||height="288" width="922"]]
73 73  
74 74  
67 +== **1.5 ​Applications** ==
75 75  
69 +* Open/Close Detection
70 +* Pulse meter application
71 +* Dry Contact Detection
76 76  
73 +== **1.6 Mechanical** ==
77 77  
78 -== 1.5 ​ Applications ==
75 +​[[image:image-20221021110415-3.png]]
79 79  
77 +== ** 1.7 Pin Definitions and Switch** ==
80 80  
79 +[[image:image-20221021110429-4.png]]
81 81  
82 -* Horizontal distance measurement
83 -* Liquid level measurement
84 -* Parking management system
85 -* Object proximity and presence detection
86 -* Intelligent trash can management system
87 -* Robot obstacle avoidance
88 -* Automatic control
89 -* Sewer
90 -* Bottom water level monitoring
81 +=== **1.7.1 Pin Definition** ===
91 91  
83 +CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
92 92  
93 -== 1.6  Specification ==
94 94  
86 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
95 95  
96 -(% style="color:blue" %)**Common DC Characteristics:**
88 +Power on Device when putting this jumper.
97 97  
98 -* Supply Voltage: 2.1v ~~ 3.6v
99 -* Operating Temperature: 0 ~~ 70°C
100 100  
101 -(% style="color:blue" %)**NB-IoT Spec:**
91 +=== **1.7.3 BOOT MODE / SW1** ===
102 102  
103 -* B1 @H-FDD: 2100MHz
104 -* B3 @H-FDD: 1800MHz
105 -* B8 @H-FDD: 900MHz
106 -* B5 @H-FDD: 850MHz
107 -* B20 @H-FDD: 800MHz
108 -* B28 @H-FDD: 700MHz
109 109  
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
110 110  
111 -== 1.7  Installation ==
96 +2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
112 112  
113 113  
114 -Sensor measure direction and angle is as below. When install the sensor, please make sure the sensor direct to object.
99 +=== **1.7.4 Reset Button** ===
115 115  
116 116  
117 -[[image:image-20221207170748-1.png]] [[image:image-20221207170748-2.png||height="366" width="672"]]
102 +Press to reboot the device.
118 118  
119 119  
105 +=== **1.7.5 LED** ===
120 120  
121 -== 1.8  Pin Definitions and Switch ==
122 122  
108 +The LED will blink when :
123 123  
124 -[[image:1670404362039-351.png]]
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
125 125  
126 126  
127 -= 2.  Use NMDS200 to communicate with IoT Server =
114 += **2.  Use CPN01 to communicate with IoT Server** =
128 128  
129 -== 2.1  How it works ==
116 +== **2.1  How it works** ==
130 130  
118 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
131 131  
132 -The NB-IoT network will forward this value to IoT server via the protocol defined by NMDS200.
120 +The diagram below shows the working flow in the default firmware of CPN01:
133 133  
134 -The diagram below shows the working flow in the default firmware of NMDS200:
135 -
136 136  [[image:image-20221021110615-5.png]]
137 137  
138 138  
139 -== 2.2 ​ Configure NMDS200 ==
125 +== **2.2 ​ Configure CPN01** ==
140 140  
127 +=== **2.2.1 Test Requirement** ===
141 141  
142 -To use NMDS200 in your city, make sure to meet below requirements:
129 +To use CPN01 in your city, make sure to meet below requirements:
143 143  
144 144  * Your local operator has already distributed an NB-IoT Network.
145 -* The local NB-IoT network used the band that NMDS200 supports.
132 +* The local NB-IoT network used the band that CPN01 supports.
146 146  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
147 147  
148 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NMDS200 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
135 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
149 149  
150 -[[image:image-20221207173300-4.png]]
137 +[[image:image-20221023000439-3.png]]
151 151  
139 + ​
152 152  
153 -=== 2.2.1 Insert NB-IoT SIM card ===
141 +=== **2.2.2 Insert SIM card** ===
154 154  
155 -
156 156  Insert the NB-IoT Card get from your provider.
157 157  
158 158  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -160,228 +160,187 @@
160 160  [[image:image-20221021110745-6.png]] ​
161 161  
162 162  
163 -=== 2.2.2 Connect USB – TTL to NMDS200 and configure it ===
150 +=== **2.2.3 Connect USB – TTL to CPN01 to configure it** ===
164 164  
152 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
165 165  
166 -User need to configure NMDS200 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NMDS200 support AT Commands, user can use a USB to TTL adapter to connect to NMDS200 and use AT Commands to configure it, as below.
154 +**Connection:**
167 167  
168 -(% style="color:blue" %)**Connection:**
156 + USB TTL GND <~-~-~-~-> GND
169 169  
170 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
158 + USB TTL TXD <~-~-~-~-> UART_RXD
171 171  
172 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
160 + USB TTL RXD <~-~-~-~-> UART_TXD
173 173  
174 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
175 -
176 -
177 177  In the PC, use below serial tool settings:
178 178  
179 -* Baud:  (% style="color:red" %)**9600**
164 +* Baud:  **9600**
165 +* Data bits:** 8**
166 +* Stop bits: **1**
167 +* Parity:  **None**
168 +* Flow Control: **None**
180 180  
181 -* Data bits:** (% style="color:red" %)8(%%)**
170 +Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:yellow" %)**Yellow Jumper**(%%).
182 182  
183 -* Stop bits: (% style="color:red" %)**1**
184 -
185 -* Parity:  (% style="color:red" %)**None**
186 -
187 -* Flow Control: (% style="color:red" %)**None**
188 -
189 -Make sure the switch is in FLASH position, then power on NMDS200 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
190 -
191 191  ​[[image:image-20221021110817-7.png]]
192 192  
193 -NMDS200 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
174 +CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
194 194  
195 195  
196 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
177 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
197 197  
179 +=== **2.2.4 Use CoAP protocol to uplink data** ===
198 198  
181 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
199 199  
200 -=== 2.2.3 Use CoAP protocol to uplink data ===
183 +**Use below commands:**
201 201  
185 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
186 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
187 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
202 202  
203 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
204 -
205 -
206 -(% style="color:blue" %)**Use below commands in NDS03A:**
207 -
208 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
209 -
210 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
211 -
212 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
213 -
214 214  For parameter description, please refer to AT command set
215 215  
216 216  [[image:image-20221021110948-8.png]]
217 217  
193 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
218 218  
219 -After configuring the server address and (% style="color:green" %)**reset NMDS200**(%%) (via AT+ATZ ), NMDS200 will start to uplink sensor values to the CoAP server.
195 +[[image:image-20221021110956-9.png]] ​
220 220  
221 -[[image:1670405841875-916.png]] ​
197 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
222 222  
199 +This feature is supported since firmware version v1.0.1
223 223  
224 -=== 2.2.4 Use UDP protocol to uplink data(Default protocol) ===
201 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
202 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
203 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
225 225  
226 -
227 -(% style="color:blue" %)**AT Commands:**
228 -
229 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
230 -
231 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
232 -
233 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
234 -
235 235  ​ [[image:image-20221021111025-10.png]]
236 236  
237 -
238 238  [[image:image-20221021111033-11.png||height="241" width="576"]]
239 239  
240 240  ​
241 241  
242 -=== 2.2.5 Use MQTT protocol to uplink data ===
211 +=== **2.2.6 Use MQTT protocol to uplink data** ===
243 243  
213 +This feature is supported since firmware version v110
244 244  
245 -(% style="color:blue" %)**AT Commands:**
215 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
216 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
217 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
218 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
219 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
220 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
221 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
246 246  
247 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
223 +​ [[image:image-20221021111058-12.png]]
248 248  
249 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
225 +[[image:image-20221021111108-13.png]]
250 250  
251 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
252 -
253 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
254 -
255 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
256 -
257 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
258 -
259 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
260 -
261 -​ [[image:image-20221118103445-7.png]]
262 -
263 -
264 -[[image:1670405928926-116.png]]
265 -
266 266  ​
267 267  
268 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
229 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
269 269  
231 +=== **2.2.7 Use TCP protocol to uplink data** ===
270 270  
271 -=== 2.2.6 Use TCP protocol to uplink data ===
233 +This feature is supported since firmware version v110
272 272  
235 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
236 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
273 273  
274 -(% style="color:blue" %)**AT Commands:**
238 +​ [[image:image-20221021111125-14.png]]
275 275  
276 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
277 -
278 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
279 -
280 -​ [[image:1670406036256-101.png||height="676" width="713"]]
281 -
282 -
283 283  [[image:image-20221021111131-15.png]]
284 284  
285 285  ​
286 286  
287 -=== 2.2.7 Change Update Interval ===
244 +=== **2.2.8 Change Update Interval** ===
288 288  
246 +User can use below command to change the **uplink interval**.
289 289  
290 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
248 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
291 291  
292 -* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (4 hours)
250 +**NOTE:**
293 293  
294 -(% style="color:red" %)**NOTE:**
252 +**~1. By default, the device will send an uplink message every 1 hour.**
295 295  
296 -1.  By default, the device will send an uplink message every 4 hour.
254 +== **2.3  Uplink Payload** ==
297 297  
256 +In this mode, uplink payload includes 87 bytes in total by default.
298 298  
299 -== 2.3  Uplink Payload ==
258 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
300 300  
260 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
261 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
301 301  
302 -The uplink payload includes 23 bytes in total by default.
263 +|2|2|4|8 group
264 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
303 303  
304 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
266 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
305 305  
268 +[[image:image-20221021111201-16.png||height="572" width="792"]]
306 306  
307 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
308 -|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:50px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**2**
309 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Exit flag|(% style="width:94px" %) Distance 1 |(% style="width:93px" %) Distance  2
270 +The payload is ASCII string, representative same HEX:
310 310  
311 -(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
312 -|(% style="width:50px" %)**4**|(% style="width:90px" %)**2**|(% style="width:90px" %)**2**|(% style="width:60px" %)**4**|(% style="width:50px" %)(((
313 -**1-32 group**
314 -)))
315 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]| Distance 1 | Distance  2|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
272 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
316 316  
317 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NMDS200 uplink data.
274 +where:
275 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
318 318  
319 -[[image:1670406261143-723.png]]
277 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
320 320  
279 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
321 321  
322 -The payload is ASCII string, representative same HEX: f867787050471071  0064  0cc3  09  01  00 00ef  013d  6390453d
281 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
323 323  
324 -**0x (% style="color:red" %)__f867787050471071__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0cc3__(% style="color:#00b0f0" %) 0__9__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00ef__(% style="color:#660066" %) (% style="color:#663300" %)__013d__ (% style="color:#d60093" %)__6390453d__(%%)**
283 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
325 325  
326 -**where:**
285 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00= 0
327 327  
328 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050471071 = f867787050471071
287 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00= 0
329 329  
330 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
289 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
331 331  
332 -* (% style="color:#037691" %)**BAT :**(%%)  0x0cc3 = 3267 mV = 3.267V
291 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
333 333  
334 -* (% style="color:#037691" %)**Singal: **(%%)0x09 = 9
293 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
335 335  
336 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
295 +*(% style="color:#037691" %)**Time stamp :**(%%) 0x6315537b =1662342011
337 337  
338 -* (% style="color:#037691" %)**Exit flag: **(%%)0x00 =0
297 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000b0200002663510fed
339 339  
340 -* (% style="color:#037691" %)**Distance 1: **(%%)0x00ef=239
299 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
341 341  
342 -* (% style="color:#037691" %)**Distance 2: **(%%)0x013d =317
301 +== **2.4  Payload Explanation and Sensor Interface** ==
343 343  
344 -* (% style="color:#037691" %)**Timestamp: **(%%)0x6390453d =1670399293 (Unix Time)
303 +=== **2.4.1  Device ID** ===
345 345  
305 +By default, the Device ID equal to the last 15 bits of IMEI.
346 346  
307 +User can use **AT+DEUI** to set Device ID
347 347  
348 -== 2.4  Payload Explanation and Sensor Interface ==
349 -
350 -=== 2.4.1  Device ID ===
351 -
352 -
353 -By default, the Device ID is equal to the last 15 bits of IMEI.
354 -
355 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
356 -
357 357  **Example:**
358 358  
359 359  AT+DEUI=868411056754138
360 360  
361 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
313 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
362 362  
315 +=== **2.4.2  Version Info** ===
363 363  
364 -=== 2.4.2  Version Info ===
317 +Specify the software version: 0x64=100, means firmware version 1.00.
365 365  
319 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
366 366  
367 -Specify the software version: 0x64=100, which means firmware version 1.00.
321 +=== **2.4.3  Battery Info** ===
368 368  
369 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
323 +Check the battery voltage for CPN01.
370 370  
371 -
372 -=== 2.4.3  Battery Info ===
373 -
374 -
375 -Check the battery voltage for NDS03A.
376 -
377 377  Ex1: 0x0B45 = 2885mV
378 378  
379 379  Ex2: 0x0B49 = 2889mV
380 380  
329 +=== **2.4.4  Signal Strength** ===
381 381  
382 -=== 2.4.4  Signal Strength ===
383 -
384 -
385 385  NB-IoT Network signal Strength.
386 386  
387 387  **Ex1: 0x1d = 29**
... ... @@ -396,46 +396,58 @@
396 396  
397 397  **99**    Not known or not detectable
398 398  
345 +=== **2.4.5 Calculate Flag** ===
399 399  
400 -=== 2.4.5  Disalarm: (default: 0) ===
347 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
401 401  
349 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
402 402  
403 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
351 +Default value: 0. 
404 404  
405 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
353 +Range (6 bits): (b)000000 ~~ (b) 111111
406 406  
407 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
355 +=== **2.4.6  Alarm** ===
408 408  
357 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
409 409  
410 -=== 2.4.6  Keep Status & Keep Time ===
359 +=== **2.4.7 Contact Status** ===
411 411  
361 +0: Open
412 412  
413 -Shows the configure value of Alarm Base on Timeout Feature
363 +1: Close
414 414  
365 +=== **2.4.8 Total pulse** ===
415 415  
416 -=== 2.4.7  Timestamp ===
367 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
417 417  
369 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
418 418  
419 -Timestamp : 0x6315537b =1662342011
371 +=== **2.4.9 The last open duration** ===
420 420  
373 +Dry Contact last open duration.
421 421  
422 -=== 2.4.8  Switch Dual Channel Mode ===
375 +Unit: min.
423 423  
377 +[[image:image-20221021111346-17.png||height="146" width="770"]]
424 424  
425 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
426 426  
380 +=== **2.4.10  Timestamp** ===
427 427  
428 -== 2.5  Downlink Payload ==
382 +Time stamp : 0x6315537b =1662342011
429 429  
384 +Convert Unix timestamp to time 2022-9-5 9:40:11.
430 430  
431 -By default, NDS03A prints the downlink payload to console port.
386 +**~ **
432 432  
433 -[[image:image-20221021111414-18.png]] ​
388 +== **2.5  Downlink Payload** ==
434 434  
390 +By default, CPN01 prints the downlink payload to console port.
435 435  
392 +[[image:image-20221021111414-18.png]] ​
393 +
436 436  **Examples:**
437 437  
438 -* (% style="color:#037691" %)**Set TDC**
396 +* **Set TDC**
439 439  
440 440  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
441 441  
... ... @@ -443,221 +443,171 @@
443 443  
444 444  Payload:    01 00 00 3C    TDC=60S
445 445  
446 -* (% style="color:#037691" %)**Reset**
404 +* **Reset**
447 447  
448 -If payload = 0x04FF, it will reset the NDS03A
406 +If payload = 0x04FF, it will reset the NSE01
449 449  
450 -* (% style="color:#037691" %)**INTMOD**
408 +* **INTMOD**
451 451  
452 452  Downlink Payload: 06000003, Set AT+INTMOD=3
453 453  
412 +== **2.6  ​LED Indicator** ==
454 454  
455 -== 2.6  ​LED Indicator ==
414 +The CPN01 has an internal LED which is to show the status of different state.
456 456  
457 -
458 -The NDS03A has an internal LED which is to show the status of different states.
459 -
460 -* When the device starts normally, the LED will light up for 1 second.
461 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
416 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
417 +* Then the LED will be on for 1 second means device is boot normally.
418 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
462 462  * For each uplink probe, LED will be on for 500ms.
463 463  
464 -== 2.7  Alarm Base on Timeout ==
421 +== **2.7  Alarm Base on Timeout** ==
465 465  
423 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
466 466  
467 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
468 468  
426 +**~1. Keep Status: Status to be monitor**
469 469  
470 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
471 -
472 472  Keep Status = 1: Monitor Close to Open event
473 473  
474 474  Keep Status = 0: Monitor Open to Close event
475 475  
476 476  
477 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
433 +**2. Keep Time: Timeout to send an Alarm**
478 478  
479 479  Range 0 ~~ 65535(0xFFFF) seconds.
480 480  
481 481  If keep time = 0, Disable Alarm Base on Timeout feature.
482 482  
483 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
439 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
484 484  
485 485  
486 -(% style="color:blue" %)**AT Command to configure:**
442 +**AT Command** to configure:
487 487  
488 -(% style="color:blue" %)**PB14 PIN:**
444 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
489 489  
490 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
446 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
491 491  
492 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
448 +== **2.8 Set debug mode** ==
493 493  
494 -
495 -(% style="color:blue" %)**PB15 PIN:**
496 -
497 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
498 -
499 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
500 -
501 -
502 -== 2.8  Set debug mode ==
503 -
504 -
505 505  Feature: Enable or Disable debug mode
506 506  
507 -(% style="color:blue" %)**AT Command: AT+DEBUG**
508 508  
453 +**AT Command: AT+DEBUG**
454 +
509 509  [[image:image-20221021111629-21.png]]
510 510  
457 +== **2.9 Clear Flash Record** ==
511 511  
512 -
513 -== 2.9  Clear Flash Record ==
514 -
515 -
516 516  Feature: Clear flash storage for data log feature.
517 517  
518 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
461 +**AT Command: AT+CLRDTA**
519 519  
520 520  [[image:image-20221021111527-19.png]]
521 521  
465 +== ** 2.10 Set trigger mode** ==
522 522  
523 -== 2.10  Count Mod ==
467 +➢ AT Command: **AT+TTRMOD**
524 524  
469 +Feature: Set the trigger interrupt mode.
525 525  
526 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
471 +[[image:image-20221021111552-20.png]]
527 527  
528 -[[image:image-20221118092935-1.png]]
473 +== **2.11 Set the calculate flag** ==
529 529  
475 +Feature: Set the calculate flag
530 530  
531 -== 2.11  Interrupt Pin Channel Mod ==
477 +**AT Command: AT+CALCFLAG**
532 532  
479 +[[image:image-20221021111711-22.png]]
533 533  
534 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
481 +== **2.12 Set count number** ==
535 535  
536 -[[image:image-20221118093144-2.png]]
483 +Feature: Manually set the count number
537 537  
485 +**AT Command: AT+SETCNT**
538 538  
539 -== 2.12 TTRIG1/2 timeout status alarm ==
487 +[[image:image-20221021111748-24.png]]
540 540  
489 +== **2.13 Set the number of data to be uploaded and the recording time** ==
541 541  
542 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
491 +➢ AT Command:
543 543  
544 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
493 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
545 545  
546 -[[image:image-20221118093512-3.png]]
547 547  
496 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
548 548  
549 -== 2.13  Select counting mode ==
498 +== **2.14 Read or Clear cached data** ==
550 550  
500 +➢ AT Command:
551 551  
552 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
502 +AT+CDP    ~/~/ Read cached data
553 553  
554 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
504 +[[image:image-20221021111810-25.png||height="364" width="797"]]
555 555  
556 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
557 557  
558 -[[image:image-20221118093658-4.png]]
507 +AT+CDP=0    ~/~/ Clear cached data ​
559 559  
509 +== **2.15  ​Firmware Change Log** ==
560 560  
561 -== 2.14  Set the number of data to be uploaded and the recording time ==
511 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
562 562  
513 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
563 563  
564 -(% style="color:blue" %)**AT Command:**
515 +== **2.16  ​Battery Analysis** ==
565 565  
566 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
517 +=== **2.16.1  ​Battery Type** ===
567 567  
568 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
519 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
569 569  
521 +The battery is designed to last for several years depends on the actually use environment and update interval. 
570 570  
571 -== 2.15  Read or Clear cached data ==
523 +The battery related documents as below:
572 572  
573 -
574 -(% style="color:blue" %)**AT Command:**
575 -
576 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
577 -
578 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
579 -
580 -[[image:image-20221118094227-5.png]]
581 -
582 -
583 -== 2.16  ​Firmware Change Log ==
584 -
585 -
586 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
587 -
588 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
589 -
590 -
591 -== 2.17  ​Battery Analysis ==
592 -
593 -=== 2.17.1  ​Battery Type ===
594 -
595 -
596 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
597 -
598 -The battery is designed to last for several years depends on the actual use environment and update interval. 
599 -
600 -The battery-related documents as below:
601 -
602 602  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
603 -
604 604  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
605 -
606 606  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
607 607  
608 608  [[image:image-20221021111911-26.png]] ​
609 609  
531 +=== **2.16.2  Power consumption Analyze** ===
610 610  
611 -=== 2.17.2  Power consumption Analyze ===
612 -
613 -
614 614  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
615 615  
616 616  Instruction to use as below:
617 617  
618 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
537 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
619 619  
620 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
539 +**Step 2: ** Open it and choose
621 621  
622 622  * Product Model
623 -
624 624  * Uplink Interval
625 -
626 626  * Working Mode
627 627  
628 628  And the Life expectation in difference case will be shown on the right.
629 629  
630 -[[image:1666596205057-567.png]] ​
547 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
631 631  
549 +=== **2.16.3  ​Battery Note** ===
632 632  
633 -=== 2.17.3  ​Battery Note ===
634 -
635 -
636 636  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
637 637  
553 +=== **2.16.4  Replace the battery** ===
638 638  
639 -=== 2.17.4  Replace the battery ===
555 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
640 640  
557 += **3. ​ Access NB-IoT Module** =
641 641  
642 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
643 -
644 -
645 -= 3. ​ Access NB-IoT Module =
646 -
647 -
648 648  Users can directly access the AT command set of the NB-IoT module.
649 649  
650 650  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
651 651  
563 +[[image:image-20221021112006-28.png]] ​
652 652  
653 -[[image:image-20221118094449-6.png]] ​
565 += **4.  Using the AT Commands** =
654 654  
567 +== **4.1  Access AT Commands** ==
655 655  
656 -= 4.  Using the AT Commands =
657 -
658 -== 4.1  Access AT Commands ==
659 -
660 -
661 661  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
662 662  
663 663  AT+<CMD>?  : Help on <CMD>
... ... @@ -668,9 +668,8 @@
668 668  
669 669  AT+<CMD>=?  : Get the value
670 670  
579 +**General Commands**      
671 671  
672 -(% style="color:blue" %)**General Commands**      
673 -
674 674  AT  : Attention       
675 675  
676 676  AT?  : Short Help     
... ... @@ -693,41 +693,35 @@
693 693  
694 694  AT+SERVADDR  : Server Address
695 695  
696 -AT+TR      :  Get or Set record time
603 +AT+TR      : Get or Set record time"
697 697  
605 +
698 698  AT+NOUD      : Get or Set the number of data to be uploaded
699 699  
700 -AT+CDP     :  Read or Clear cached data
701 701  
702 -AT+ DEBUG   : Enable or Disable debug mode
609 +AT+CDP     : Read or Clear cached data
703 703  
704 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
705 705  
706 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
612 +AT+ DEBUG   : Enable or Disable debug mode
707 707  
708 -AT+COUNTMOD  :  Get or Set the count mode
614 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
709 709  
710 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
616 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
711 711  
712 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
618 +AT+ CALCFLAG   : Get or Set the calculate flag
713 713  
714 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
620 +AT+ CLRC   : Clear current door open count
715 715  
716 -AT+ CLRC   :  Clear current door open count
622 +**COAP Management**      
717 717  
718 -
719 -(% style="color:blue" %)**COAP Management**      
720 -
721 721  AT+URI            : Resource parameters
722 722  
626 +**UDP Management**
723 723  
724 -(% style="color:blue" %)**UDP Management**
725 -
726 726  AT+CFM          : Upload confirmation mode (only valid for UDP)
727 727  
630 +**MQTT Management**
728 728  
729 -(% style="color:blue" %)**MQTT Management**
730 -
731 731  AT+CLIENT               : Get or Set MQTT client
732 732  
733 733  AT+UNAME  : Get or Set MQTT Username
... ... @@ -738,58 +738,86 @@
738 738  
739 739  AT+SUBTOPIC  : Get or Set MQTT subscription topic
740 740  
642 +**Information**          
741 741  
742 -(% style="color:blue" %)**Information**          
743 -
744 744  AT+FDR  : Factory Data Reset
745 745  
746 746  AT+PWORD  : Serial Access Password
747 747  
648 += **​5.  FAQ** =
748 748  
749 -= ​5.  FAQ =
650 +== **5.1 ​ How to Upgrade Firmware** ==
750 750  
751 -== 5.1 ​ How to Upgrade Firmware ==
752 -
753 -
754 754  User can upgrade the firmware for 1) bug fix, 2) new feature release.
755 755  
756 756  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
757 757  
758 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
656 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
759 759  
658 +== **5.2  Can I calibrate CPN01 to different soil types?** ==
760 760  
761 -= 6.  Trouble Shooting =
660 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
762 762  
763 -== 6.1  ​Connection problem when uploading firmware ==
662 += **6.  Trouble Shooting** =
764 764  
664 +== **6.1  ​Connection problem when uploading firmware** ==
765 765  
766 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
666 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
767 767  
668 +== **6.2  AT Command input doesn't work** ==
768 768  
769 -== 6.2  AT Command input doesn't work ==
670 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
770 770  
672 += **7. ​ Order Info** =
771 771  
772 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
674 +Part Number**:** CPN01
773 773  
676 += **8.  Packing Info** =
774 774  
775 -= 7. ​ Order Info =
678 +**Package Includes**:
776 776  
680 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
681 +* External antenna x 1
777 777  
778 -Part Number**:** NDS03A
683 +**Dimension and weight**:
779 779  
685 +* Size: 195 x 125 x 55 mm
686 +* Weight:   420g
780 780  
781 -= 8.  Packing Info =
688 += **9.  Support** =
782 782  
690 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
691 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
783 783  
784 -(% style="color:blue" %)**Package Includes**:
693 +​
785 785  
786 -* NDS03A Open/Close Door Sensor x 1
787 787  
788 -= 9.  Support =
789 789  
790 790  
791 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
792 792  
793 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
794 794  
795 -​
700 +
701 +
702 +
703 +
704 +
705 +
706 +
707 +
708 +
709 +
710 +
711 +
712 +
713 +
714 +
715 +
716 +
717 +
718 +
719 +
720 +
721 +
722 +
723 +
724 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
1670404362039-351.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -492.6 KB
Content
1670405841875-916.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.1 KB
Content
1670405928926-116.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.7 KB
Content
1670406036256-101.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -181.0 KB
Content
1670406261143-723.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.9 KB
Content
LMDS200_10.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content
image-20221207170748-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -26.1 KB
Content
image-20221207170748-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.9 KB
Content
image-20221207173200-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.7 KB
Content
image-20221207173300-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0