Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 70.3 >
edited by Xiaoling
on 2022/11/18 10:40
To version < 59.3 >
edited by Xiaoling
on 2022/11/17 14:34
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,12 +9,10 @@
9 9  
10 10  **Table of Contents：**
11 11  
12 -{{toc/}}
13 13  
14 14  
15 15  
16 16  
17 -
18 18  = 1.  Introduction =
19 19  
20 20  == 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
... ... @@ -131,6 +131,7 @@
131 131  The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
132 132  
133 133  
132 +
134 134  === 1.7.2  Jumper JP2(Power ON/OFF) ===
135 135  
136 136  
... ... @@ -137,6 +137,7 @@
137 137  Power on Device when putting this jumper.
138 138  
139 139  
139 +
140 140  === 1.7.3  BOOT MODE / SW1 ===
141 141  
142 142  
... ... @@ -145,6 +145,7 @@
145 145  2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
146 146  
147 147  
148 +
148 148  === 1.7.4  Reset Button ===
149 149  
150 150  
... ... @@ -151,6 +151,7 @@
151 151  Press to reboot the device.
152 152  
153 153  
155 +
154 154  === 1.7.5  LED ===
155 155  
156 156  
... ... @@ -161,16 +161,18 @@
161 161  2.  Send an uplink packet
162 162  
163 163  
166 +
164 164  == 1.8  Magnet Distance ==
165 165  
166 166  
167 167  (% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
168 168  
169 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
172 +(% style="color:blue" %)**Iron Door:**(%%)**  **30 ~~ 45mm
170 170  
171 171  
172 -= 2.  Use NDS03A to communicate with IoT Server =
173 173  
176 += 2.  Use CPN01 to communicate with IoT Server =
177 +
174 174  == 2.1  How it works ==
175 175  
176 176  
... ... @@ -181,6 +181,7 @@
181 181  [[image:image-20221021110615-5.png]]
182 182  
183 183  
188 +
184 184  == 2.2 ​ Configure NDS03A ==
185 185  
186 186  === 2.2.1 Test Requirement ===
... ... @@ -196,7 +196,9 @@
196 196  
197 197  [[image:image-20221117142300-1.png]]
198 198  
204 + ​
199 199  
206 +
200 200  === 2.2.2 Insert NB-IoT SIM card ===
201 201  
202 202  
... ... @@ -207,6 +207,7 @@
207 207  [[image:image-20221021110745-6.png]] ​
208 208  
209 209  
217 +
210 210  === 2.2.3 Connect USB – TTL to NDS03A and configure it ===
211 211  
212 212  
... ... @@ -250,7 +250,7 @@
250 250  (% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
251 251  
252 252  
253 -(% style="color:blue" %)**Use below commands in NDS03A:**
261 +(% style="color:blue" %)**Use below commands in CPN01:**
254 254  
255 255  * (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
256 256  
... ... @@ -263,9 +263,9 @@
263 263  [[image:image-20221021110948-8.png]]
264 264  
265 265  
266 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
274 +After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
267 267  
268 -[[image:image-20221118103547-9.png||height="605" width="837"]] ​
276 +[[image:image-20221021110956-9.png]] ​
269 269  
270 270  
271 271  
... ... @@ -307,10 +307,10 @@
307 307  
308 308  * (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
309 309  
310 -​ [[image:image-20221118103445-7.png]]
318 +​ [[image:image-20221021111058-12.png]]
311 311  
312 312  
313 -[[image:image-20221118103453-8.png||height="608" width="841"]]
321 +[[image:image-20221021111201-16.png||height="472" width="653"]]
314 314  
315 315  ​
316 316  
... ... @@ -350,76 +350,59 @@
350 350  == 2.3  Uplink Payload ==
351 351  
352 352  
353 -The uplink payload includes 26 bytes in total by default.
361 +The uplink payload includes 123 bytes in total by default.
354 354  
355 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
363 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
356 356  
357 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
358 358  
359 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
360 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
361 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
366 +(% border="1.5" style="background-color:#ffffcc; color:green; width:510px" %)
367 +|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:40px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:60px" %)**3**
368 +|=(% style="width: 96px;" %)**Value**|(% style="width:84px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:44px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:121px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:52px" %)MOD|(% style="width:84px" %)[[ Calculate Flag>>||anchor="H2.4.5A0CalculateFlag"]]|(% style="width:116px" %)[[Contact Status>>||anchor="H2.4.7A0ContactStatus"]]|(% style="width:57px" %)[[Alarm>>||anchor="H2.4.6A0Alarm"]]|(% style="width:91px" %)[[Total pulse>>||anchor="H2.4.8A0Totalpulse"]]
362 362  
363 363  (% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
364 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
365 -**1-32 group**
366 -)))
367 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
371 +|(% style="width:100px" %)**3**|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:100px" %)**3**|(% style="width:80px" %)4|(% style="width:50px" %)**8 group**
372 +|(% style="width:176px" %)[[The last open duration>>||anchor="H2.4.9A0Thelastopenduration"]]|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Contact Status|(% style="width:92px" %)Total pulse|(% style="width:169px" %)The last open duration|(% style="width:97px" %)Time stamp|(% style="width:74px" %)...
368 368  
374 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
369 369  
376 +[[image:image-20221021111201-16.png||height="572" width="792"]]
370 370  
371 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
372 372  
373 -
374 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
375 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
376 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
377 -
378 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
379 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
380 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
381 -
382 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
383 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
384 -**1-32 group**
385 -)))
386 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
387 -
388 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
389 -
390 -[[image:image-20221117145932-2.png]]
391 -
392 -
393 393  The payload is ASCII string, representative same HEX:
394 394  
395 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
381 +**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0c78__(% style="color:#00b0f0" %) __17__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__ (% style="color:#660066" %)__00__ (% style="color:#aaaa40" %)__000009__(% style="color:#663300" %) __000002__ (% style="color:#d60093" %)__6315537b__ (% style="color:#660066" %)__01 00000b 02 0000026 63510fed__ (%%)__0100000e0200000263510f39__ __010000000000000063510e85__ __010000000000000063510d2e__ __010000000000000063510c7a__ __010000000000000063510bc6__ __010000000000000063510954__ __010000000000000063510882 __**
396 396  
397 397  **where:**
398 398  
399 399  * (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
400 400  
401 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
387 +* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
402 402  
403 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
389 +* (% style="color:#037691" %)**BAT :**(%%) 0x0c78 = 3192 mV = 3.192V
404 404  
405 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
391 +* (% style="color:#037691" %)**Singal: **(%%)0x17 = 23
406 406  
407 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
393 +* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
408 408  
409 -* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
395 +* (% style="color:#037691" %)**Calculate Flag:**(%%) 0x00=0
410 410  
411 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
397 +* (% style="color:#037691" %)**Contact Status:**(%%) 0x00=0
412 412  
413 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
399 +* (% style="color:#037691" %)**Alarm: **(%%)0x00 =0
414 414  
415 -* (% style="color:#037691" %)**last open time:  **(%%)0x000017 =23
401 +* (% style="color:#037691" %)**Total pulse: **(%%)0x000009 =9
416 416  
417 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
403 +* (% style="color:#037691" %)**The last open duration: **(%%)0x000002 =2
418 418  
405 +* (% style="color:#037691" %)**Timestamp:**(%%) 0x6315537b =1662342011 (Unix Time)
419 419  
407 +* (% style="color:#037691" %)**Contact Status, Total pulse,The last open duration ,Time stamp :**(%%) 01  00000b  000026  63510fed
420 420  
409 +* (% style="color:#037691" %)**8 sets of recorded data: Contact Status, Total pulse, The last open duration ,Time stamp :**(%%) 0100000e00002663510f39,.......
410 +
421 421  == 2.4  Payload Explanation and Sensor Interface ==
422 422  
413 +
423 423  === 2.4.1  Device ID ===
424 424  
425 425  
... ... @@ -434,18 +434,20 @@
434 434  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
435 435  
436 436  
428 +
437 437  === 2.4.2  Version Info ===
438 438  
439 439  
440 440  Specify the software version: 0x64=100, which means firmware version 1.00.
441 441  
442 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
434 +For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
443 443  
444 444  
437 +
445 445  === 2.4.3  Battery Info ===
446 446  
447 447  
448 -Check the battery voltage for NDS03A.
441 +Check the battery voltage for CPN01.
449 449  
450 450  Ex1: 0x0B45 = 2885mV
451 451  
... ... @@ -452,6 +452,7 @@
452 452  Ex2: 0x0B49 = 2889mV
453 453  
454 454  
448 +
455 455  === 2.4.4  Signal Strength ===
456 456  
457 457  
... ... @@ -470,38 +470,70 @@
470 470  **99**    Not known or not detectable
471 471  
472 472  
473 -=== 2.4.5  Disalarm: (default: 0) ===
474 474  
468 +=== 2.4.5  Calculate Flag ===
475 475  
476 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
477 477  
478 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
471 +The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
479 479  
480 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
473 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
481 481  
475 +Default value: 0. 
482 482  
483 -=== 2.4.6  Keep Status & Keep Time ===
477 +Range (6 bits): (b)000000 ~~ (b) 111111
484 484  
485 485  
486 -Shows the configure value of Alarm Base on Timeout Feature
487 487  
481 +=== 2.4.6  Alarm ===
488 488  
489 -=== 2.4.7  Timestamp ===
490 490  
484 +See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
491 491  
492 -Timestamp : 0x6315537b =1662342011
493 493  
494 494  
495 -=== 2.4.8  Switch Dual Channel Mode ===
488 +=== 2.4.7  Contact Status ===
496 496  
497 497  
498 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
491 +0: Open
499 499  
493 +1: Close
500 500  
495 +
496 +
497 +=== 2.4.8  Total pulse ===
498 +
499 +
500 +Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
501 +
502 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
503 +
504 +
505 +
506 +=== 2.4.9  The last open duration ===
507 +
508 +
509 +Dry Contact last open duration.
510 +
511 +Unit: min.
512 +
513 +[[image:image-20221021111346-17.png||height="146" width="770"]]
514 +
515 +
516 +
517 +=== 2.4.10  Timestamp ===
518 +
519 +
520 +Timestamp : 0x6315537b =1662342011
521 +
522 +Convert Unix timestamp to time 2022-9-5 9:40:11.
523 +
524 +**~ **
525 +
526 +
501 501  == 2.5  Downlink Payload ==
502 502  
503 503  
504 -By default, NDS03A prints the downlink payload to console port.
530 +By default, CPN01 prints the downlink payload to console port.
505 505  
506 506  [[image:image-20221021111414-18.png]] ​
507 507  
... ... @@ -518,7 +518,7 @@
518 518  
519 519  * (% style="color:#037691" %)**Reset**
520 520  
521 -If payload = 0x04FF, it will reset the NDS03A
547 +If payload = 0x04FF, it will reset the NSE01
522 522  
523 523  * (% style="color:#037691" %)**INTMOD**
524 524  
... ... @@ -525,21 +525,20 @@
525 525  Downlink Payload: 06000003, Set AT+INTMOD=3
526 526  
527 527  
554 +
528 528  == 2.6  ​LED Indicator ==
529 529  
530 530  
531 -The NDS03A has an internal LED which is to show the status of different states.
558 +The CPN01 has an internal LED which is to show the status of different states.
532 532  
533 533  * When the device starts normally, the LED will light up for 1 second.
534 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
561 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
535 535  * For each uplink probe, LED will be on for 500ms.
536 536  
537 -
538 -
539 539  == 2.7  Alarm Base on Timeout ==
540 540  
541 541  
542 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
567 +CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
543 543  
544 544  
545 545  (% style="color:blue" %)**1. Keep Status: Status to be monitor**
... ... @@ -555,25 +555,17 @@
555 555  
556 556  If keep time = 0, Disable Alarm Base on Timeout feature.
557 557  
558 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
583 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
559 559  
560 560  
561 561  (% style="color:blue" %)**AT Command to configure:**
562 562  
563 -(% style="color:blue" %)**PB14 PIN:**
588 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
564 564  
565 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
566 -
567 567  (% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
568 568  
569 569  
570 -(% style="color:blue" %)**PB15 PIN:**
571 571  
572 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
573 -
574 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
575 -
576 -
577 577  == 2.8  Set debug mode ==
578 578  
579 579  
... ... @@ -596,88 +596,79 @@
596 596  
597 597  
598 598  
599 -== 2.10  Count Mod ==
616 +== 2.10  Set trigger mode ==
600 600  
601 601  
602 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
619 +(% style="color:blue" %)**AT Command: AT+TTRMOD**
603 603  
604 -[[image:image-20221118092935-1.png]]
621 +Feature: Set the trigger interrupt mode.
605 605  
623 +[[image:image-20221021111552-20.png]]
606 606  
607 607  
608 -== 2.11  Interrupt Pin Channel Mod ==
609 609  
627 +== 2.11  Set the calculate flag ==
610 610  
611 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
612 612  
613 -[[image:image-20221118093144-2.png]]
630 +Feature: Set the calculate flag
614 614  
632 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
615 615  
634 +[[image:image-20221021111711-22.png]]
616 616  
617 -== 2.12 TTRIG1/2 timeout status alarm ==
618 618  
619 619  
620 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
638 +== 2.12 Set count number ==
621 621  
622 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
623 623  
624 -[[image:image-20221118093512-3.png]]
641 +Feature: Manually set the count number
625 625  
643 +(% style="color:blue" %)**AT Command: AT+SETCNT**
626 626  
645 +[[image:image-20221021111748-24.png]]
627 627  
628 -== 2.13  Select counting mode ==
629 629  
630 630  
631 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
649 +== 2.13  Set the number of data to be uploaded and the recording time ==
632 632  
633 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
634 634  
635 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
652 +(% style="color:blue" %)**AT Command:**
636 636  
637 -[[image:image-20221118093658-4.png]]
654 +(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
638 638  
656 +(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
639 639  
640 640  
641 641  
642 -== 2.14  Set the number of data to be uploaded and the recording time ==
660 +== 2.14  Read or Clear cached data ==
643 643  
644 644  
645 645  (% style="color:blue" %)**AT Command:**
646 646  
647 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
648 -
649 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
650 -
651 -
652 -== 2.15  Read or Clear cached data ==
653 -
654 -
655 -(% style="color:blue" %)**AT Command:**
656 -
657 657  (% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
658 658  
659 659  (% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
660 660  
661 -[[image:image-20221118094227-5.png]]
669 +[[image:image-20221021111810-25.png||height="364" width="797"]]
662 662  
663 663  
664 664  
665 -== 2.16  ​Firmware Change Log ==
673 +== 2.15  ​Firmware Change Log ==
666 666  
667 667  
668 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
676 +Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
669 669  
670 670  Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
671 671  
672 672  
673 673  
674 -== 2.17  ​Battery Analysis ==
682 +== 2.16  ​Battery Analysis ==
675 675  
676 676  
677 -=== 2.17.1  ​Battery Type ===
685 +=== 2.16.1  ​Battery Type ===
678 678  
679 679  
680 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
688 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
681 681  
682 682  The battery is designed to last for several years depends on the actual use environment and update interval. 
683 683  
... ... @@ -693,7 +693,7 @@
693 693  
694 694  
695 695  
696 -=== 2.17.2  Power consumption Analyze ===
704 +=== 2.16.2  Power consumption Analyze ===
697 697  
698 698  
699 699  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
... ... @@ -716,7 +716,7 @@
716 716  
717 717  
718 718  
719 -=== 2.17.3  ​Battery Note ===
727 +=== 2.16.3  ​Battery Note ===
720 720  
721 721  
722 722  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
... ... @@ -723,10 +723,10 @@
723 723  
724 724  
725 725  
726 -=== 2.17.4  Replace the battery ===
734 +=== 2.16.4  Replace the battery ===
727 727  
728 728  
729 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
737 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
730 730  
731 731  
732 732  
... ... @@ -737,7 +737,7 @@
737 737  
738 738  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
739 739  
740 -[[image:image-20221118094449-6.png]] ​
748 +[[image:image-20221021112006-28.png]] ​
741 741  
742 742  
743 743  
... ... @@ -790,21 +790,15 @@
790 790  
791 791  AT+ DEBUG   : Enable or Disable debug mode
792 792  
793 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
801 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
794 794  
795 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
803 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
796 796  
797 -AT+COUNTMOD  :  Get or Set the count mode
805 +AT+ CALCFLAG   : Get or Set the calculate flag
798 798  
799 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
807 +AT+ CLRC   : Clear current door open count
800 800  
801 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
802 802  
803 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
804 -
805 -AT+ CLRC   :  Clear current door open count
806 -
807 -
808 808  (% style="color:blue" %)**COAP Management**      
809 809  
810 810  AT+URI            : Resource parameters
... ... @@ -846,7 +846,7 @@
846 846  
847 847  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
848 848  
849 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
851 +(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
850 850  
851 851  
852 852  
... ... @@ -870,7 +870,7 @@
870 870  = 7. ​ Order Info =
871 871  
872 872  
873 -Part Number**:** NDS03A
875 +Part Number**:** CPN01
874 874  
875 875  
876 876  
... ... @@ -879,8 +879,14 @@
879 879  
880 880  (% style="color:blue" %)**Package Includes**:
881 881  
882 -* NDS03A Open/Close Door Sensor x 1
884 +* CPN01 Open/Close Sensor x 1
885 +* External antenna x 1
883 883  
887 +(% style="color:blue" %)**Dimension and weight**:
888 +
889 +* Size: 195 x 125 x 55 mm
890 +* Weight:   420g
891 +
884 884  = 9.  Support =
885 885  
886 886  
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0