Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 70.3 >
edited by Xiaoling
on 2022/11/18 10:40
To version < 48.6 >
edited by Xiaoling
on 2022/10/24 16:05
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Content
... ... @@ -1,12 +1,8 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 4  
5 5  
6 -
7 -
8 -
9 -
10 10  **Table of Contents：**
11 11  
12 12  {{toc/}}
... ... @@ -17,43 +17,26 @@
17 17  
18 18  = 1.  Introduction =
19 19  
20 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
21 21  
17 +== 1.1 ​ What is CPN01 NB-IoT Pulse/Contact Sensor ==
22 22  
23 -(((
24 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
25 -)))
26 26  
27 -(((
28 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
29 -)))
20 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
30 30  
31 -(((
32 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
33 -)))
22 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
34 34  
35 -(((
36 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -)))
24 +CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
38 38  
39 -(((
40 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
41 -)))
26 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
42 42  
43 -(((
44 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
45 -)))
28 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
29 +\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
30 +\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
31 +\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
46 46  
47 -(((
48 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
49 -)))
33 +​
50 50  
51 -(((
52 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
53 -)))
54 54  
55 -
56 -
57 57  == ​1.2  Features ==
58 58  
59 59  
... ... @@ -61,7 +61,7 @@
61 61  * Open/Close detect
62 62  * Open/Close statistics
63 63  * Monitor Battery Level
64 -* connect two door sensors
43 +* Uplink on periodically and open/close event
65 65  * Datalog feature
66 66  * Uplink periodically
67 67  * Downlink to change configure
... ... @@ -74,54 +74,54 @@
74 74  
75 75  
76 76  
77 -== 1.3  Storage & Operation ==
56 +== 1.3  Specification ==
78 78  
79 79  
80 -Temperature -40°C to +85°C
59 +(% style="color:blue" %)**Common DC Characteristics:**
81 81  
61 +* Supply Voltage: 2.1v ~~ 3.6v
62 +* Operating Temperature: -40 ~~ 85°C
82 82  
83 -== 1.4  Mechanical ==
64 +(% style="color:blue" %)**NB-IoT Spec:**
84 84  
66 +* - B1 @H-FDD: 2100MHz
67 +* - B3 @H-FDD: 1800MHz
68 +* - B8 @H-FDD: 900MHz
69 +* - B5 @H-FDD: 850MHz
70 +* - B20 @H-FDD: 800MHz
71 +* - B28 @H-FDD: 700MHz
85 85  
86 -[[image:image-20221117114937-4.png]]
87 87  
88 88  
89 -[[image:image-20221117114949-5.png]]
75 +== 1.4  Installation ==
90 90  
91 91  
92 -[[image:image-20221117115010-6.png]]
78 +Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
93 93  
80 +[[image:image-20221021110329-1.png]]
94 94  
82 +[[image:image-20221022234602-2.png||height="288" width="922"]]
95 95  
96 -== 1.5 ​ Applications ==
97 97  
98 98  
99 -[[image:image-20221117114842-3.png]]
86 +== 1.5 ​ Applications ==
100 100  
101 101  
89 +* Open/Close Detection
90 +* Pulse meter application
91 +* Dry Contact Detection
102 102  
103 -== 1.6  Specification ==
104 104  
105 105  
106 -(% style="color:blue" %)**Common DC Characteristics:**
95 +== 1.6  Mechanical ==
107 107  
108 -* Supply Voltage: 2.1v ~~ 3.6v
109 -* Operating Temperature: -40 ~~ 85°C
110 110  
111 -(% style="color:blue" %)**NB-IoT Spec:**
98 +​[[image:image-20221021110415-3.png]]
112 112  
113 -* - B1 @H-FDD: 2100MHz
114 -* - B3 @H-FDD: 1800MHz
115 -* - B8 @H-FDD: 900MHz
116 -* - B5 @H-FDD: 850MHz
117 -* - B20 @H-FDD: 800MHz
118 -* - B28 @H-FDD: 700MHz
119 119  
120 120  
121 -
122 122  == 1.7  Pin Definitions and Switch ==
123 123  
124 -
125 125  [[image:image-20221021110429-4.png]]
126 126  
127 127  
... ... @@ -128,9 +128,10 @@
128 128  === 1.7.1  Pin Definition ===
129 129  
130 130  
131 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
110 +CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
132 132  
133 133  
113 +
134 134  === 1.7.2  Jumper JP2(Power ON/OFF) ===
135 135  
136 136  
... ... @@ -137,6 +137,7 @@
137 137  Power on Device when putting this jumper.
138 138  
139 139  
120 +
140 140  === 1.7.3  BOOT MODE / SW1 ===
141 141  
142 142  
... ... @@ -145,6 +145,7 @@
145 145  2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
146 146  
147 147  
129 +
148 148  === 1.7.4  Reset Button ===
149 149  
150 150  
... ... @@ -151,6 +151,7 @@
151 151  Press to reboot the device.
152 152  
153 153  
136 +
154 154  === 1.7.5  LED ===
155 155  
156 156  
... ... @@ -161,42 +161,40 @@
161 161  2.  Send an uplink packet
162 162  
163 163  
164 -== 1.8  Magnet Distance ==
165 165  
148 += 2.  Use CPN01 to communicate with IoT Server =
166 166  
167 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
168 168  
169 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
170 -
171 -
172 -= 2.  Use NDS03A to communicate with IoT Server =
173 -
174 174  == 2.1  How it works ==
175 175  
176 176  
177 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
154 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get (% style="color:blue" %)**Open/Close Event or Count**(%%) from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
178 178  
179 -The diagram below shows the working flow in the default firmware of NDS03A:
156 +The diagram below shows the working flow in the default firmware of CPN01:
180 180  
181 181  [[image:image-20221021110615-5.png]]
182 182  
183 183  
184 -== 2.2 ​ Configure NDS03A ==
185 185  
162 +== 2.2 ​ Configure CPN01 ==
163 +
164 +
186 186  === 2.2.1 Test Requirement ===
187 187  
188 188  
189 -To use NDS03A in your city, make sure to meet below requirements:
168 +To use CPN01 in your city, make sure to meet below requirements:
190 190  
191 191  * Your local operator has already distributed an NB-IoT Network.
192 -* The local NB-IoT network used the band that NDS03A supports.
171 +* The local NB-IoT network used the band that CPN01 supports.
193 193  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
194 194  
195 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
174 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
196 196  
197 -[[image:image-20221117142300-1.png]]
176 +[[image:image-20221023000439-3.png]]
198 198  
178 + ​
199 199  
180 +
200 200  === 2.2.2 Insert NB-IoT SIM card ===
201 201  
202 202  
... ... @@ -207,11 +207,12 @@
207 207  [[image:image-20221021110745-6.png]] ​
208 208  
209 209  
210 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
211 211  
192 +=== 2.2.3 Connect USB – TTL to CPN01 and configure it ===
212 212  
213 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
214 214  
195 +User need to configure CPN01 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
196 +
215 215  (% style="color:blue" %)**Connection:**
216 216  
217 217  (% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
... ... @@ -233,11 +233,11 @@
233 233  
234 234  * Flow Control: (% style="color:red" %)**None**
235 235  
236 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
218 +Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
237 237  
238 238  ​[[image:image-20221021110817-7.png]]
239 239  
240 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
222 +CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
241 241  
242 242  
243 243  (% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
... ... @@ -250,7 +250,7 @@
250 250  (% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
251 251  
252 252  
253 -(% style="color:blue" %)**Use below commands in NDS03A:**
235 +(% style="color:blue" %)**Use below commands in CPN01:**
254 254  
255 255  * (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
256 256  
... ... @@ -263,9 +263,9 @@
263 263  [[image:image-20221021110948-8.png]]
264 264  
265 265  
266 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
248 +After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
267 267  
268 -[[image:image-20221118103547-9.png||height="605" width="837"]] ​
250 +[[image:image-20221021110956-9.png]] ​
269 269  
270 270  
271 271  
... ... @@ -307,10 +307,10 @@
307 307  
308 308  * (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
309 309  
310 -​ [[image:image-20221118103445-7.png]]
292 +​ [[image:image-20221021111058-12.png]]
311 311  
312 312  
313 -[[image:image-20221118103453-8.png||height="608" width="841"]]
295 +[[image:image-20221021111201-16.png||height="472" width="653"]]
314 314  
315 315  ​
316 316  
... ... @@ -339,11 +339,11 @@
339 339  
340 340  User can use below command to change the (% style="color:blue" %)**uplink interval**.
341 341  
342 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
324 +* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (2 hours)
343 343  
344 344  (% style="color:red" %)**NOTE:**
345 345  
346 -1.  By default, the device will send an uplink message every 4 hour.
328 +1.  By default, the device will send an uplink message every 1 hour.
347 347  
348 348  
349 349  
... ... @@ -350,76 +350,61 @@
350 350  == 2.3  Uplink Payload ==
351 351  
352 352  
353 -The uplink payload includes 26 bytes in total by default.
335 +The uplink payload includes 123 bytes in total by default.
354 354  
355 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
337 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
356 356  
357 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
358 358  
359 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
360 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
361 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
340 +(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:510px" %)
341 +|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:84px" %)**8**|(% style="width:40px" %)**2**|(% style="width:44px" %)**2**|(% style="width:121px" %)**1**|(% style="width:52px" %)**1**|(% style="width:84px" %)**1**|(% style="width:116px" %)**1**|(% style="width:57px" %)**1**|(% style="width:91px" %)**3**
342 +|=(% style="width: 96px;" %)**Value**|(% style="width:84px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:44px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:121px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:52px" %)MOD|(% style="width:84px" %)[[ Calculate Flag>>||anchor="H2.4.5A0CalculateFlag"]]|(% style="width:116px" %)Contact Status|(% style="width:57px" %)Alarm>>||anchor="H2.4.6A0Alarm"|(% style="width:91px" %)Total pulse
362 362  
363 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
364 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
365 -**1-32 group**
366 -)))
367 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
344 +(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:510px" %)
345 +|(% style="width:176px" %)**3**|(% style="width:98px" %)**4**|(% style="width:115px" %)**1**|(% style="width:92px" %)**3**|(% style="width:110px" %)**1**|(% style="width:169px" %)**3**|(% style="width:97px" %)4|(% style="width:74px" %)**8 group**
346 +|(% style="width:176px" %)The last open duration|(% style="width:98px" %)Time stamp|(% style="width:115px" %)Contact Status|(% style="width:92px" %)Total pulse|(% style="width:110px" %)Calculate Flag|(% style="width:169px" %)The last open duration|(% style="width:97px" %)Time stamp|(% style="width:74px" %)...
368 368  
348 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
369 369  
350 +[[image:image-20221021111201-16.png||height="572" width="792"]]
370 370  
371 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
372 372  
353 +The payload is ASCII string, representative same HEX:
373 373  
374 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
375 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
376 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
355 +**0x (% style="color:red" %)f867787050213317  (% style="color:blue" %)0064 (% style="color:green" %) 0c78(% style="color:#00b0f0" %) 17(% style="color:#7030a0" %) 01(% style="color:#0020b0" %) 00 (% style="color:#420042" %)00 (% style="color:#660066" %)00 (% style="color:#aaaa40" %)09(% style="color:#663300" %) 02 (% style="color:#d60093" %)6315537b (% style="color:#660066" %)__01 00000b 02 0000026 63510fed__ (%%)__0100000e0200000263510f39__ __010000000000000063510e85__ __010000000000000063510d2e__ __010000000000000063510c7a__ __010000000000000063510bc6__ __010000000000000063510954__ __010000000000000063510882 __**
377 377  
378 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
379 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
380 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
357 +**where:**
381 381  
382 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
383 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
384 -**1-32 group**
385 -)))
386 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
359 +(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
387 387  
388 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
361 +(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
389 389  
390 -[[image:image-20221117145932-2.png]]
363 +(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
391 391  
365 +(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
392 392  
393 -The payload is ASCII string, representative same HEX:
367 +(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
394 394  
395 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
369 +(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00=0
396 396  
397 -**where:**
371 +(% style="color:#037691" %) **Contact Status:**(%%) 0x00=0
398 398  
399 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
373 +(% style="color:#037691" %) **Alarm: **(%%)0x00 =0
400 400  
401 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
375 +(% style="color:#037691" %) **Total pulse: **(%%)0x09 =0
402 402  
403 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
377 +(% style="color:#037691" %) **The last open duration: **(%%)0x02 =2
404 404  
405 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
379 +(% style="color:#037691" %)** Time stamp :**(%%) 0x6315537b =1662342011 (Unix Time)
406 406  
407 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
381 +(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 01  00000b  02  000026  63510fed
408 408  
409 -* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
383 +(% style="color:#037691" %)**8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
410 410  
411 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
412 412  
413 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
414 414  
415 -* (% style="color:#037691" %)**last open time:  **(%%)0x000017 =23
416 -
417 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
418 -
419 -
420 -
421 421  == 2.4  Payload Explanation and Sensor Interface ==
422 422  
389 +
423 423  === 2.4.1  Device ID ===
424 424  
425 425  
... ... @@ -434,18 +434,20 @@
434 434  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
435 435  
436 436  
404 +
437 437  === 2.4.2  Version Info ===
438 438  
439 439  
440 440  Specify the software version: 0x64=100, which means firmware version 1.00.
441 441  
442 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
410 +For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
443 443  
444 444  
413 +
445 445  === 2.4.3  Battery Info ===
446 446  
447 447  
448 -Check the battery voltage for NDS03A.
417 +Check the battery voltage for CPN01.
449 449  
450 450  Ex1: 0x0B45 = 2885mV
451 451  
... ... @@ -452,6 +452,7 @@
452 452  Ex2: 0x0B49 = 2889mV
453 453  
454 454  
424 +
455 455  === 2.4.4  Signal Strength ===
456 456  
457 457  
... ... @@ -470,38 +470,70 @@
470 470  **99**    Not known or not detectable
471 471  
472 472  
473 -=== 2.4.5  Disalarm: (default: 0) ===
474 474  
444 +=== 2.4.5  Calculate Flag ===
475 475  
476 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
477 477  
478 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
447 +The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
479 479  
480 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
449 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
481 481  
451 +Default value: 0. 
482 482  
483 -=== 2.4.6  Keep Status & Keep Time ===
453 +Range (6 bits): (b)000000 ~~ (b) 111111
484 484  
485 485  
486 -Shows the configure value of Alarm Base on Timeout Feature
487 487  
457 +=== 2.4.6  Alarm ===
488 488  
489 -=== 2.4.7  Timestamp ===
490 490  
460 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
491 491  
492 -Timestamp : 0x6315537b =1662342011
493 493  
494 494  
495 -=== 2.4.8  Switch Dual Channel Mode ===
464 +=== 2.4.7  Contact Status ===
496 496  
497 497  
498 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
467 +0: Open
499 499  
469 +1: Close
500 500  
471 +
472 +
473 +=== 2.4.8  Total pulse ===
474 +
475 +
476 +Total pulse/counting based on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
477 +
478 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
479 +
480 +
481 +
482 +=== 2.4.9  The last open duration ===
483 +
484 +
485 +Dry Contact last open duration.
486 +
487 +Unit: min.
488 +
489 +[[image:image-20221021111346-17.png||height="146" width="770"]]
490 +
491 +
492 +
493 +=== 2.4.10  Timestamp ===
494 +
495 +
496 +Timestamp : 0x6315537b =1662342011
497 +
498 +Convert Unix timestamp to time 2022-9-5 9:40:11.
499 +
500 +**~ **
501 +
502 +
501 501  == 2.5  Downlink Payload ==
502 502  
503 503  
504 -By default, NDS03A prints the downlink payload to console port.
506 +By default, CPN01 prints the downlink payload to console port.
505 505  
506 506  [[image:image-20221021111414-18.png]] ​
507 507  
... ... @@ -518,7 +518,7 @@
518 518  
519 519  * (% style="color:#037691" %)**Reset**
520 520  
521 -If payload = 0x04FF, it will reset the NDS03A
523 +If payload = 0x04FF, it will reset the NSE01
522 522  
523 523  * (% style="color:#037691" %)**INTMOD**
524 524  
... ... @@ -525,21 +525,20 @@
525 525  Downlink Payload: 06000003, Set AT+INTMOD=3
526 526  
527 527  
530 +
528 528  == 2.6  ​LED Indicator ==
529 529  
530 530  
531 -The NDS03A has an internal LED which is to show the status of different states.
534 +The CPN01 has an internal LED which is to show the status of different states.
532 532  
533 533  * When the device starts normally, the LED will light up for 1 second.
534 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
537 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
535 535  * For each uplink probe, LED will be on for 500ms.
536 536  
537 -
538 -
539 539  == 2.7  Alarm Base on Timeout ==
540 540  
541 541  
542 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
543 +CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
543 543  
544 544  
545 545  (% style="color:blue" %)**1. Keep Status: Status to be monitor**
... ... @@ -555,25 +555,17 @@
555 555  
556 556  If keep time = 0, Disable Alarm Base on Timeout feature.
557 557  
558 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
559 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
559 559  
560 560  
561 561  (% style="color:blue" %)**AT Command to configure:**
562 562  
563 -(% style="color:blue" %)**PB14 PIN:**
564 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
564 564  
565 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
566 -
567 567  (% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
568 568  
569 569  
570 -(% style="color:blue" %)**PB15 PIN:**
571 571  
572 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
573 -
574 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
575 -
576 -
577 577  == 2.8  Set debug mode ==
578 578  
579 579  
... ... @@ -596,88 +596,79 @@
596 596  
597 597  
598 598  
599 -== 2.10  Count Mod ==
592 +== 2.10  Set trigger mode ==
600 600  
601 601  
602 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
595 +(% style="color:blue" %)**AT Command: AT+TTRMOD**
603 603  
604 -[[image:image-20221118092935-1.png]]
597 +Feature: Set the trigger interrupt mode.
605 605  
599 +[[image:image-20221021111552-20.png]]
606 606  
607 607  
608 -== 2.11  Interrupt Pin Channel Mod ==
609 609  
603 +== 2.11  Set the calculate flag ==
610 610  
611 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
612 612  
613 -[[image:image-20221118093144-2.png]]
606 +Feature: Set the calculate flag
614 614  
608 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
615 615  
610 +[[image:image-20221021111711-22.png]]
616 616  
617 -== 2.12 TTRIG1/2 timeout status alarm ==
618 618  
619 619  
620 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
614 +== 2.12 Set count number ==
621 621  
622 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
623 623  
624 -[[image:image-20221118093512-3.png]]
617 +Feature: Manually set the count number
625 625  
619 +(% style="color:blue" %)**AT Command: AT+SETCNT**
626 626  
621 +[[image:image-20221021111748-24.png]]
627 627  
628 -== 2.13  Select counting mode ==
629 629  
630 630  
631 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
625 +== 2.13  Set the number of data to be uploaded and the recording time ==
632 632  
633 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
634 634  
635 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
628 +(% style="color:blue" %)**AT Command:**
636 636  
637 -[[image:image-20221118093658-4.png]]
630 +(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
638 638  
632 +(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
639 639  
640 640  
641 641  
642 -== 2.14  Set the number of data to be uploaded and the recording time ==
636 +== 2.14  Read or Clear cached data ==
643 643  
644 644  
645 645  (% style="color:blue" %)**AT Command:**
646 646  
647 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
648 -
649 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
650 -
651 -
652 -== 2.15  Read or Clear cached data ==
653 -
654 -
655 -(% style="color:blue" %)**AT Command:**
656 -
657 657  (% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
658 658  
659 659  (% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
660 660  
661 -[[image:image-20221118094227-5.png]]
645 +[[image:image-20221021111810-25.png||height="364" width="797"]]
662 662  
663 663  
664 664  
665 -== 2.16  ​Firmware Change Log ==
649 +== 2.15  ​Firmware Change Log ==
666 666  
667 667  
668 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
652 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
669 669  
670 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
654 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
671 671  
672 672  
673 673  
674 -== 2.17  ​Battery Analysis ==
658 +== 2.16  ​Battery Analysis ==
675 675  
676 676  
677 -=== 2.17.1  ​Battery Type ===
661 +=== 2.16.1  ​Battery Type ===
678 678  
679 679  
680 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
664 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
681 681  
682 682  The battery is designed to last for several years depends on the actual use environment and update interval. 
683 683  
... ... @@ -693,7 +693,7 @@
693 693  
694 694  
695 695  
696 -=== 2.17.2  Power consumption Analyze ===
680 +=== 2.16.2  Power consumption Analyze ===
697 697  
698 698  
699 699  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
... ... @@ -716,7 +716,7 @@
716 716  
717 717  
718 718  
719 -=== 2.17.3  ​Battery Note ===
703 +=== 2.16.3  ​Battery Note ===
720 720  
721 721  
722 722  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
... ... @@ -723,10 +723,10 @@
723 723  
724 724  
725 725  
726 -=== 2.17.4  Replace the battery ===
710 +=== 2.16.4  Replace the battery ===
727 727  
728 728  
729 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
713 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
730 730  
731 731  
732 732  
... ... @@ -737,7 +737,7 @@
737 737  
738 738  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
739 739  
740 -[[image:image-20221118094449-6.png]] ​
724 +[[image:image-20221021112006-28.png]] ​
741 741  
742 742  
743 743  
... ... @@ -790,21 +790,15 @@
790 790  
791 791  AT+ DEBUG   : Enable or Disable debug mode
792 792  
793 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
777 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
794 794  
795 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
779 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
796 796  
797 -AT+COUNTMOD  :  Get or Set the count mode
781 +AT+ CALCFLAG   : Get or Set the calculate flag
798 798  
799 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
783 +AT+ CLRC   : Clear current door open count
800 800  
801 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
802 802  
803 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
804 -
805 -AT+ CLRC   :  Clear current door open count
806 -
807 -
808 808  (% style="color:blue" %)**COAP Management**      
809 809  
810 810  AT+URI            : Resource parameters
... ... @@ -846,7 +846,7 @@
846 846  
847 847  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
848 848  
849 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
827 +(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
850 850  
851 851  
852 852  
... ... @@ -870,7 +870,7 @@
870 870  = 7. ​ Order Info =
871 871  
872 872  
873 -Part Number**:** NDS03A
851 +Part Number**:** CPN01
874 874  
875 875  
876 876  
... ... @@ -879,8 +879,14 @@
879 879  
880 880  (% style="color:blue" %)**Package Includes**:
881 881  
882 -* NDS03A Open/Close Door Sensor x 1
860 +* CPN01 Open/Close Sensor x 1
861 +* External antenna x 1
883 883  
863 +(% style="color:blue" %)**Dimension and weight**:
864 +
865 +* Size: 195 x 125 x 55 mm
866 +* Weight:   420g
867 +
884 884  = 9.  Support =
885 885  
886 886  
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0