Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 70.3 >
edited by Xiaoling
on 2022/11/18 10:40
To version < 47.1 >
edited by David Huang
on 2022/10/24 10:33
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,67 +1,34 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 -
5 -
6 -
7 -
8 -
9 -
10 -**Table of Contents：**
11 -
12 12  {{toc/}}
13 13  
6 += **1. Introduction** =
14 14  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
15 15  
10 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
16 16  
12 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
17 17  
18 -= 1.  Introduction =
14 +CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
19 19  
20 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
16 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
21 21  
18 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
19 +\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
20 +\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
21 +\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
22 22  
23 -(((
24 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
25 -)))
23 +​
26 26  
27 -(((
28 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
29 -)))
25 +== **​1.2 Features** ==
30 30  
31 -(((
32 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
33 -)))
34 -
35 -(((
36 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -)))
38 -
39 -(((
40 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
41 -)))
42 -
43 -(((
44 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
45 -)))
46 -
47 -(((
48 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
49 -)))
50 -
51 -(((
52 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
53 -)))
54 -
55 -
56 -
57 -== ​1.2  Features ==
58 -
59 -
60 60  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
61 61  * Open/Close detect
62 62  * Open/Close statistics
63 63  * Monitor Battery Level
64 -* connect two door sensors
31 +* Uplink on periodically and open/close event
65 65  * Datalog feature
66 66  * Uplink periodically
67 67  * Downlink to change configure
... ... @@ -72,43 +72,14 @@
72 72  * Micro SIM card slot for NB-IoT SIM
73 73  * 8500mAh Battery for long-term use
74 74  
42 +== **1.3  Specification** ==
75 75  
44 +**Common DC Characteristics:**
76 76  
77 -== 1.3  Storage & Operation ==
78 -
79 -
80 -Temperature -40°C to +85°C
81 -
82 -
83 -== 1.4  Mechanical ==
84 -
85 -
86 -[[image:image-20221117114937-4.png]]
87 -
88 -
89 -[[image:image-20221117114949-5.png]]
90 -
91 -
92 -[[image:image-20221117115010-6.png]]
93 -
94 -
95 -
96 -== 1.5 ​ Applications ==
97 -
98 -
99 -[[image:image-20221117114842-3.png]]
100 -
101 -
102 -
103 -== 1.6  Specification ==
104 -
105 -
106 -(% style="color:blue" %)**Common DC Characteristics:**
107 -
108 108  * Supply Voltage: 2.1v ~~ 3.6v
109 109  * Operating Temperature: -40 ~~ 85°C
110 110  
111 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
112 112  
113 113  * - B1 @H-FDD: 2100MHz
114 114  * - B3 @H-FDD: 1800MHz
... ... @@ -117,89 +117,90 @@
117 117  * - B20 @H-FDD: 800MHz
118 118  * - B28 @H-FDD: 700MHz
119 119  
58 +== **1.4 Installation** ==
120 120  
60 +Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
121 121  
122 -== 1.7  Pin Definitions and Switch ==
62 +[[image:image-20221021110329-1.png]]
123 123  
64 +[[image:image-20221022234602-2.png||height="288" width="922"]]
124 124  
125 -[[image:image-20221021110429-4.png]]
126 126  
67 +== **1.5 ​Applications** ==
127 127  
128 -=== 1.7.1  Pin Definition ===
69 +* Open/Close Detection
70 +* Pulse meter application
71 +* Dry Contact Detection
129 129  
73 +== **1.6 Mechanical** ==
130 130  
131 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
75 +​[[image:image-20221021110415-3.png]]
132 132  
77 +== ** 1.7 Pin Definitions and Switch** ==
133 133  
134 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
79 +[[image:image-20221021110429-4.png]]
135 135  
81 +=== **1.7.1 Pin Definition** ===
136 136  
83 +CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
84 +
85 +
86 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
87 +
137 137  Power on Device when putting this jumper.
138 138  
139 139  
140 -=== 1.7.3  BOOT MODE / SW1 ===
91 +=== **1.7.3 BOOT MODE / SW1** ===
141 141  
142 142  
143 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
144 144  
145 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
96 +2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
146 146  
147 147  
148 -=== 1.7.4  Reset Button ===
99 +=== **1.7.4 Reset Button** ===
149 149  
150 150  
151 151  Press to reboot the device.
152 152  
153 153  
154 -=== 1.7.5  LED ===
105 +=== **1.7.5 LED** ===
155 155  
156 156  
157 157  The LED will blink when :
158 158  
159 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
160 160  
161 -2.  Send an uplink packet
113 += **2.  Use CPN01 to communicate with IoT Server** =
162 162  
115 +== **2.1  How it works** ==
163 163  
164 -== 1.8  Magnet Distance ==
117 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
165 165  
119 +The diagram below shows the working flow in the default firmware of CPN01:
166 166  
167 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
168 -
169 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
170 -
171 -
172 -= 2.  Use NDS03A to communicate with IoT Server =
173 -
174 -== 2.1  How it works ==
175 -
176 -
177 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
178 -
179 -The diagram below shows the working flow in the default firmware of NDS03A:
180 -
181 181  [[image:image-20221021110615-5.png]]
182 182  
183 183  
184 -== 2.2 ​ Configure NDS03A ==
124 +== **2.2 ​ Configure CPN01** ==
185 185  
186 -=== 2.2.1 Test Requirement ===
126 +=== **2.2.1 Test Requirement** ===
187 187  
128 +To use CPN01 in your city, make sure to meet below requirements:
188 188  
189 -To use NDS03A in your city, make sure to meet below requirements:
190 -
191 191  * Your local operator has already distributed an NB-IoT Network.
192 -* The local NB-IoT network used the band that NDS03A supports.
131 +* The local NB-IoT network used the band that CPN01 supports.
193 193  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
194 194  
195 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
196 196  
197 -[[image:image-20221117142300-1.png]]
136 +[[image:image-20221023000439-3.png]]
198 198  
138 + ​
199 199  
200 -=== 2.2.2 Insert NB-IoT SIM card ===
140 +=== **2.2.2 Insert NB-IoT SIM card** ===
201 201  
202 -
203 203  Insert the NB-IoT Card get from your provider.
204 204  
205 205  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -207,126 +207,101 @@
207 207  [[image:image-20221021110745-6.png]] ​
208 208  
209 209  
210 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
149 +=== **2.2.3 Connect USB – TTL to CPN01 and configure it** ===
211 211  
151 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
212 212  
213 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
153 +**Connection:**
214 214  
215 -(% style="color:blue" %)**Connection:**
155 + USB TTL GND <~-~-~-~-> GND
216 216  
217 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
157 + USB TTL TXD <~-~-~-~-> UART_RXD
218 218  
219 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
159 + USB TTL RXD <~-~-~-~-> UART_TXD
220 220  
221 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
222 -
223 -
224 224  In the PC, use below serial tool settings:
225 225  
226 -* Baud:  (% style="color:red" %)**9600**
163 +* Baud:  **9600**
164 +* Data bits:** 8**
165 +* Stop bits: **1**
166 +* Parity:  **None**
167 +* Flow Control: **None**
227 227  
228 -* Data bits:** (% style="color:red" %)8(%%)**
169 +Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
229 229  
230 -* Stop bits: (% style="color:red" %)**1**
231 -
232 -* Parity:  (% style="color:red" %)**None**
233 -
234 -* Flow Control: (% style="color:red" %)**None**
235 -
236 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
237 -
238 238  ​[[image:image-20221021110817-7.png]]
239 239  
240 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
173 +CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
241 241  
242 242  
243 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
244 244  
245 245  
179 +=== **2.2.4 Use CoAP protocol to uplink data** ===
246 246  
247 -=== 2.2.4 Use CoAP protocol to uplink data ===
181 +**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
248 248  
249 249  
250 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
184 +**Use below commands in CPN01:**
251 251  
186 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
187 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ Set CoAP server address and port
188 +* **AT+URI=0,0,11,2,"mqtt" ** ~/~/Set CoAP resource path
252 252  
253 -(% style="color:blue" %)**Use below commands in NDS03A:**
254 -
255 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
256 -
257 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
258 -
259 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
260 -
261 261  For parameter description, please refer to AT command set
262 262  
263 263  [[image:image-20221021110948-8.png]]
264 264  
265 265  
266 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
195 +After configuring the server address and **reset CPN01** (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
267 267  
268 -[[image:image-20221118103547-9.png||height="605" width="837"]] ​
197 +[[image:image-20221021110956-9.png]] ​
269 269  
270 270  
200 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
271 271  
272 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
273 273  
203 +**AT Commands:**
274 274  
275 -(% style="color:blue" %)**AT Commands:**
205 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
206 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ Set UDP server address and port
207 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
276 276  
277 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
278 -
279 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
280 -
281 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
282 -
283 283  ​ [[image:image-20221021111025-10.png]]
284 284  
285 -
286 286  [[image:image-20221021111033-11.png||height="241" width="576"]]
287 287  
288 288  ​
289 289  
215 +=== **2.2.6 Use MQTT protocol to uplink data** ===
290 290  
291 -=== 2.2.6 Use MQTT protocol to uplink data ===
292 292  
218 +**AT Commands:**
293 293  
294 -(% style="color:blue" %)**AT Commands:**
220 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
221 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
222 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
223 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
224 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
225 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
226 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
295 295  
296 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
228 +​ [[image:image-20221021111058-12.png]]
297 297  
298 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
230 +[[image:image-20221021111201-16.png||height="472" width="653"]]
299 299  
300 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
301 -
302 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
303 -
304 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
305 -
306 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
307 -
308 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
309 -
310 -​ [[image:image-20221118103445-7.png]]
311 -
312 -
313 -[[image:image-20221118103453-8.png||height="608" width="841"]]
314 -
315 315  ​
316 316  
317 317  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
318 318  
319 319  
237 +=== **2.2.7 Use TCP protocol to uplink data** ===
320 320  
321 -=== 2.2.7 Use TCP protocol to uplink data ===
239 +**AT Commands**
322 322  
241 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
242 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ Set TCP server address and port
323 323  
324 -(% style="color:blue" %)**AT Commands:**
325 -
326 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
327 -
328 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
329 -
330 330  ​ [[image:image-20221021111125-14.png]]
331 331  
332 332  [[image:image-20221021111131-15.png]]
... ... @@ -333,99 +333,73 @@
333 333  
334 334  ​
335 335  
250 +=== **2.2.8 Change Update Interval** ===
336 336  
337 -=== 2.2.8 Change Update Interval ===
252 +User can use below command to change the **uplink interval**.
338 338  
254 +* **AT+TDC=7200      ** ~/~/ Set Update Interval to 7200s (2 hours)
339 339  
340 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
256 +**NOTE:**
341 341  
342 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
258 +**~1. By default, the device will send an uplink message every 1 hour.**
343 343  
344 -(% style="color:red" %)**NOTE:**
345 345  
346 -1.  By default, the device will send an uplink message every 4 hour.
261 +== **2.3  Uplink Payload** ==
347 347  
263 +The uplink payload includes 123 bytes in total by default.
348 348  
265 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
349 349  
350 -== 2.3  Uplink Payload ==
267 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**1**|**1**|**3**
268 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[ Calculate Flag>>path:#H2.4.8A0DigitalInterrupt]]|Contact Status|Alarm|Total pulse
351 351  
270 +(% style="width:1201px" %)
271 +|**3**|**4**|**1**|**3**|**1**|**3**|4|**8 group**|(% style="width:1px" %)
272 +|The last open duration|Time stamp|Contact Status|Total pulse|Calculate Flag|The last open duration|Time stamp|...|(% style="width:1px" %)
352 352  
353 -The uplink payload includes 26 bytes in total by default.
274 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
354 354  
355 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
276 +[[image:image-20221021111201-16.png||height="572" width="792"]]
356 356  
357 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
358 -
359 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
360 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
361 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
362 -
363 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
364 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
365 -**1-32 group**
366 -)))
367 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
368 -
369 -
370 -
371 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
372 -
373 -
374 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
375 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
376 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
377 -
378 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
379 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
380 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
381 -
382 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
383 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
384 -**1-32 group**
385 -)))
386 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
387 -
388 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
389 -
390 -[[image:image-20221117145932-2.png]]
391 -
392 -
393 393  The payload is ASCII string, representative same HEX:
394 394  
395 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
280 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
396 396  
397 -**where:**
282 +where:
283 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
398 398  
399 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
285 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
400 400  
401 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
287 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
402 402  
403 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
289 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
404 404  
405 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
291 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
406 406  
407 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
293 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00=0
408 408  
409 -* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
295 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00=0
410 410  
411 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
297 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
412 412  
413 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
299 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
414 414  
415 -* (% style="color:#037691" %)**last open time:  **(%%)0x000017 =23
301 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
416 416  
417 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
303 +*(% style="color:#037691" %)** Time stamp :**(%%) 0x6315537b =1662342011 (Unix Time)
418 418  
305 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 01  00000b  02  000026  63510fed
419 419  
307 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
420 420  
421 -== 2.4  Payload Explanation and Sensor Interface ==
422 422  
423 -=== 2.4.1  Device ID ===
310 +== **2.4  Payload Explanation and Sensor Interface** ==
424 424  
312 +=== **2.4.1  Device ID** ===
425 425  
426 426  By default, the Device ID is equal to the last 15 bits of IMEI.
427 427  
428 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
316 +User can use **AT+DEUI** to set Device ID
429 429  
430 430  **Example:**
431 431  
... ... @@ -434,27 +434,24 @@
434 434  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
435 435  
436 436  
437 -=== 2.4.2  Version Info ===
325 +=== **2.4.2  Version Info** ===
438 438  
439 -
440 440  Specify the software version: 0x64=100, which means firmware version 1.00.
441 441  
442 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
329 +For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
443 443  
444 444  
445 -=== 2.4.3  Battery Info ===
332 +=== **2.4.3  Battery Info** ===
446 446  
334 +Check the battery voltage for CPN01.
447 447  
448 -Check the battery voltage for NDS03A.
449 -
450 450  Ex1: 0x0B45 = 2885mV
451 451  
452 452  Ex2: 0x0B49 = 2889mV
453 453  
454 454  
455 -=== 2.4.4  Signal Strength ===
341 +=== **2.4.4  Signal Strength** ===
456 456  
457 -
458 458  NB-IoT Network signal Strength.
459 459  
460 460  **Ex1: 0x1d = 29**
... ... @@ -470,45 +470,62 @@
470 470  **99**    Not known or not detectable
471 471  
472 472  
473 -=== 2.4.5  Disalarm: (default: 0) ===
358 +=== **2.4.5 Calculate Flag** ===
474 474  
360 +The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
475 475  
476 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
362 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
477 477  
478 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
364 +Default value: 0. 
479 479  
480 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
366 +Range (6 bits): (b)000000 ~~ (b) 111111
481 481  
482 482  
483 -=== 2.4.6  Keep Status & Keep Time ===
369 +=== **2.4.6  Alarm** ===
484 484  
371 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
485 485  
486 -Shows the configure value of Alarm Base on Timeout Feature
487 487  
374 +=== **2.4.7 Contact Status** ===
488 488  
489 -=== 2.4.7  Timestamp ===
376 +0: Open
490 490  
378 +1: Close
491 491  
492 -Timestamp : 0x6315537b =1662342011
493 493  
381 +=== **2.4.8 Total pulse** ===
494 494  
495 -=== 2.4.8  Switch Dual Channel Mode ===
383 +Total pulse/counting based on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
496 496  
385 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
497 497  
498 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
499 499  
388 +=== **2.4.9 The last open duration** ===
500 500  
501 -== 2.5  Downlink Payload ==
390 +Dry Contact last open duration.
502 502  
392 +Unit: min.
503 503  
504 -By default, NDS03A prints the downlink payload to console port.
394 +[[image:image-20221021111346-17.png||height="146" width="770"]]
505 505  
506 -[[image:image-20221021111414-18.png]] ​
507 507  
397 +=== **2.4.10  Timestamp** ===
508 508  
399 +Timestamp : 0x6315537b =1662342011
400 +
401 +Convert Unix timestamp to time 2022-9-5 9:40:11.
402 +
403 +**~ **
404 +
405 +== **2.5  Downlink Payload** ==
406 +
407 +By default, CPN01 prints the downlink payload to console port.
408 +
409 +[[image:image-20221021111414-18.png]] ​
410 +
509 509  **Examples:**
510 510  
511 -* (% style="color:#037691" %)**Set TDC**
413 +* **Set TDC**
512 512  
513 513  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
514 514  
... ... @@ -516,237 +516,172 @@
516 516  
517 517  Payload:    01 00 00 3C    TDC=60S
518 518  
519 -* (% style="color:#037691" %)**Reset**
421 +* **Reset**
520 520  
521 -If payload = 0x04FF, it will reset the NDS03A
423 +If payload = 0x04FF, it will reset the NSE01
522 522  
523 -* (% style="color:#037691" %)**INTMOD**
425 +* **INTMOD**
524 524  
525 525  Downlink Payload: 06000003, Set AT+INTMOD=3
526 526  
429 +== **2.6  ​LED Indicator** ==
527 527  
528 -== 2.6  ​LED Indicator ==
431 +The CPN01 has an internal LED which is to show the status of different states.
529 529  
530 -
531 -The NDS03A has an internal LED which is to show the status of different states.
532 -
533 533  * When the device starts normally, the LED will light up for 1 second.
534 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
434 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
535 535  * For each uplink probe, LED will be on for 500ms.
536 536  
437 +== **2.7  Alarm Base on Timeout** ==
537 537  
439 +CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
538 538  
539 -== 2.7  Alarm Base on Timeout ==
540 540  
442 +**~1. Keep Status: Status to be monitor**
541 541  
542 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
543 -
544 -
545 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
546 -
547 547  Keep Status = 1: Monitor Close to Open event
548 548  
549 549  Keep Status = 0: Monitor Open to Close event
550 550  
551 551  
552 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
449 +**2. Keep Time: Timeout to send an Alarm**
553 553  
554 554  Range 0 ~~ 65535(0xFFFF) seconds.
555 555  
556 556  If keep time = 0, Disable Alarm Base on Timeout feature.
557 557  
558 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
455 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
559 559  
560 560  
561 -(% style="color:blue" %)**AT Command to configure:**
458 +**AT Command** to configure:
562 562  
563 -(% style="color:blue" %)**PB14 PIN:**
460 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
564 564  
565 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
462 +**AT+TTRIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
566 566  
567 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
568 568  
465 +== **2.8 Set debug mode** ==
569 569  
570 -(% style="color:blue" %)**PB15 PIN:**
571 -
572 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
573 -
574 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
575 -
576 -
577 -== 2.8  Set debug mode ==
578 -
579 -
580 580  Feature: Enable or Disable debug mode
581 581  
582 -(% style="color:blue" %)**AT Command: AT+DEBUG**
583 583  
470 +**AT Command: AT+DEBUG**
471 +
584 584  [[image:image-20221021111629-21.png]]
585 585  
474 +== **2.9 Clear Flash Record** ==
586 586  
587 -
588 -== 2.9  Clear Flash Record ==
589 -
590 -
591 591  Feature: Clear flash storage for data log feature.
592 592  
593 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
478 +**AT Command: AT+CLRDTA**
594 594  
595 595  [[image:image-20221021111527-19.png]]
596 596  
482 +== ** 2.10 Set trigger mode** ==
597 597  
484 +➢ AT Command: **AT+TTRMOD**
598 598  
599 -== 2.10  Count Mod ==
486 +Feature: Set the trigger interrupt mode.
600 600  
488 +[[image:image-20221021111552-20.png]]
601 601  
602 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
490 +== **2.11 Set the calculate flag** ==
603 603  
604 -[[image:image-20221118092935-1.png]]
492 +Feature: Set the calculate flag
605 605  
494 +**AT Command: AT+CALCFLAG**
606 606  
496 +[[image:image-20221021111711-22.png]]
607 607  
608 -== 2.11  Interrupt Pin Channel Mod ==
498 +== **2.12 Set count number** ==
609 609  
500 +Feature: Manually set the count number
610 610  
611 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
502 +**AT Command: AT+SETCNT**
612 612  
613 -[[image:image-20221118093144-2.png]]
504 +[[image:image-20221021111748-24.png]]
614 614  
506 +== **2.13 Set the number of data to be uploaded and the recording time** ==
615 615  
508 +➢ AT Command:
616 616  
617 -== 2.12 TTRIG1/2 timeout status alarm ==
510 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
618 618  
619 619  
620 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
513 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
621 621  
622 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
515 +== **2.14 Read or Clear cached data** ==
623 623  
624 -[[image:image-20221118093512-3.png]]
517 +➢ AT Command:
625 625  
519 +AT+CDP    ~/~/ Read cached data
626 626  
521 +[[image:image-20221021111810-25.png||height="364" width="797"]]
627 627  
628 -== 2.13  Select counting mode ==
629 629  
524 +AT+CDP=0    ~/~/ Clear cached data ​
630 630  
631 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
526 +== **2.15  ​Firmware Change Log** ==
632 632  
633 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
528 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
634 634  
635 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
530 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
636 636  
637 -[[image:image-20221118093658-4.png]]
532 +== **2.16  ​Battery Analysis** ==
638 638  
534 +=== **2.16.1  ​Battery Type** ===
639 639  
536 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
640 640  
641 -
642 -== 2.14  Set the number of data to be uploaded and the recording time ==
643 -
644 -
645 -(% style="color:blue" %)**AT Command:**
646 -
647 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
648 -
649 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
650 -
651 -
652 -== 2.15  Read or Clear cached data ==
653 -
654 -
655 -(% style="color:blue" %)**AT Command:**
656 -
657 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
658 -
659 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
660 -
661 -[[image:image-20221118094227-5.png]]
662 -
663 -
664 -
665 -== 2.16  ​Firmware Change Log ==
666 -
667 -
668 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
669 -
670 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
671 -
672 -
673 -
674 -== 2.17  ​Battery Analysis ==
675 -
676 -
677 -=== 2.17.1  ​Battery Type ===
678 -
679 -
680 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
681 -
682 682  The battery is designed to last for several years depends on the actual use environment and update interval. 
683 683  
684 684  The battery-related documents as below:
685 685  
686 686  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
687 -
688 688  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
689 -
690 690  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
691 691  
692 692  [[image:image-20221021111911-26.png]] ​
693 693  
548 +=== **2.16.2  Power consumption Analyze** ===
694 694  
695 -
696 -=== 2.17.2  Power consumption Analyze ===
697 -
698 -
699 699  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
700 700  
701 701  Instruction to use as below:
702 702  
703 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
554 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
704 704  
705 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
556 +**Step 2: ** Open it and choose
706 706  
707 707  * Product Model
708 -
709 709  * Uplink Interval
710 -
711 711  * Working Mode
712 712  
713 713  And the Life expectation in difference case will be shown on the right.
714 714  
715 -[[image:1666596205057-567.png]] ​
564 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
716 716  
566 +=== **2.16.3  ​Battery Note** ===
717 717  
718 -
719 -=== 2.17.3  ​Battery Note ===
720 -
721 -
722 722  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
723 723  
570 +=== **2.16.4  Replace the battery** ===
724 724  
572 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
725 725  
726 -=== 2.17.4  Replace the battery ===
727 727  
575 += **3. ​ Access NB-IoT Module** =
728 728  
729 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
730 -
731 -
732 -
733 -= 3. ​ Access NB-IoT Module =
734 -
735 -
736 736  Users can directly access the AT command set of the NB-IoT module.
737 737  
738 738  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
739 739  
740 -[[image:image-20221118094449-6.png]] ​
581 +[[image:image-20221021112006-28.png]] ​
741 741  
583 += **4.  Using the AT Commands** =
742 742  
585 +== **4.1  Access AT Commands** ==
743 743  
744 -= 4.  Using the AT Commands =
745 -
746 -
747 -== 4.1  Access AT Commands ==
748 -
749 -
750 750  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
751 751  
752 752  AT+<CMD>?  : Help on <CMD>
... ... @@ -757,9 +757,8 @@
757 757  
758 758  AT+<CMD>=?  : Get the value
759 759  
597 +**General Commands**      
760 760  
761 -(% style="color:blue" %)**General Commands**      
762 -
763 763  AT  : Attention       
764 764  
765 765  AT?  : Short Help     
... ... @@ -782,41 +782,35 @@
782 782  
783 783  AT+SERVADDR  : Server Address
784 784  
785 -AT+TR      :  Get or Set record time
621 +AT+TR      : Get or Set record time"
786 786  
623 +
787 787  AT+NOUD      : Get or Set the number of data to be uploaded
788 788  
789 -AT+CDP     :  Read or Clear cached data
790 790  
791 -AT+ DEBUG   : Enable or Disable debug mode
627 +AT+CDP     : Read or Clear cached data
792 792  
793 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
794 794  
795 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
630 +AT+ DEBUG   : Enable or Disable debug mode
796 796  
797 -AT+COUNTMOD  :  Get or Set the count mode
632 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
798 798  
799 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
634 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
800 800  
801 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
636 +AT+ CALCFLAG   : Get or Set the calculate flag
802 802  
803 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
638 +AT+ CLRC   : Clear current door open count
804 804  
805 -AT+ CLRC   :  Clear current door open count
640 +**COAP Management**      
806 806  
807 -
808 -(% style="color:blue" %)**COAP Management**      
809 -
810 810  AT+URI            : Resource parameters
811 811  
644 +**UDP Management**
812 812  
813 -(% style="color:blue" %)**UDP Management**
814 -
815 815  AT+CFM          : Upload confirmation mode (only valid for UDP)
816 816  
648 +**MQTT Management**
817 817  
818 -(% style="color:blue" %)**MQTT Management**
819 -
820 820  AT+CLIENT               : Get or Set MQTT client
821 821  
822 822  AT+UNAME  : Get or Set MQTT Username
... ... @@ -827,65 +827,86 @@
827 827  
828 828  AT+SUBTOPIC  : Get or Set MQTT subscription topic
829 829  
660 +**Information**          
830 830  
831 -(% style="color:blue" %)**Information**          
832 -
833 833  AT+FDR  : Factory Data Reset
834 834  
835 835  AT+PWORD  : Serial Access Password
836 836  
666 += **​5.  FAQ** =
837 837  
668 +== **5.1 ​ How to Upgrade Firmware** ==
838 838  
839 -= ​5.  FAQ =
670 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
840 840  
672 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
841 841  
842 -== 5.1 ​ How to Upgrade Firmware ==
674 +**Notice, **CPN01 **and **CPL01 **share the same mother board. They use the same connection and method to update.**
843 843  
844 844  
845 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
677 += **6.  Trouble Shooting** =
846 846  
847 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
679 +== **6.1  ​Connection problem when uploading firmware** ==
848 848  
849 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
681 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
850 850  
851 851  
684 +== **6.2  AT Command input doesn't work** ==
852 852  
853 -= 6.  Trouble Shooting =
686 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
854 854  
855 855  
856 -== 6.1  ​Connection problem when uploading firmware ==
689 += **7. ​ Order Info** =
857 857  
691 +Part Number**:** CPN01
858 858  
859 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
860 860  
694 += **8.  Packing Info** =
861 861  
696 +**Package Includes**:
862 862  
863 -== 6.2  AT Command input doesn't work ==
698 +* CPN01 Open/Close Sensor x 1
699 +* External antenna x 1
864 864  
701 +**Dimension and weight**:
865 865  
866 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
703 +* Size: 195 x 125 x 55 mm
704 +* Weight:   420g
867 867  
706 += **9.  Support** =
868 868  
708 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
709 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
869 869  
870 -= 7. ​ Order Info =
711 +​
871 871  
872 872  
873 -Part Number**:** NDS03A
874 874  
875 875  
876 876  
877 -= 8.  Packing Info =
878 878  
879 879  
880 -(% style="color:blue" %)**Package Includes**:
881 881  
882 -* NDS03A Open/Close Door Sensor x 1
883 883  
884 -= 9.  Support =
885 885  
886 886  
887 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
888 888  
889 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
890 890  
891 -​
725 +
726 +
727 +
728 +
729 +
730 +
731 +
732 +
733 +
734 +
735 +
736 +
737 +
738 +
739 +
740 +
741 +
742 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0