Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 70.3 >
edited by Xiaoling
on 2022/11/18 10:40
To version < 27.1 >
edited by David Huang
on 2022/10/21 11:18
>
Change comment: Uploaded new attachment "image-20221021111810-25.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,69 +1,36 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png"]]
3 3  
4 4  
5 +**~1. Introduction**
5 5  
7 +**1.1 ​**What is CPN01 **NB-IOT** Pulse/Contact Sensor
6 6  
9 +The Dragino CPL01 is a **NB-IOT Contact Sensor**. It detects open/close status and uplink to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
7 7  
11 +The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
8 8  
13 +CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open for a certain time.
9 9  
10 -**Table of Contents：**
15 +CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
11 11  
12 -{{toc/}}
17 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
18 +\\CPN01 supports different uplink methods include **TCP,MQTT,UDP and CoAP  **for different application requirement.
19 +\\CPN01 is powered by  **8500mAh Li-SOCI2 battery**, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
20 +\\To use CPN01, user needs to check if there is NB-IoT coverage in local area and with the bands CPN01 supports. If the local operate support it, user needs to get a **NB-IoT SIM card** from local operator and install CPN01 to get NB-IoT network connection
13 13  
22 +​
14 14  
15 15  
25 +**​1.2 Features**
16 16  
17 -
18 -= 1.  Introduction =
19 -
20 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
21 -
22 -
23 -(((
24 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
25 -)))
26 -
27 -(((
28 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
29 -)))
30 -
31 -(((
32 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
33 -)))
34 -
35 -(((
36 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -)))
38 -
39 -(((
40 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
41 -)))
42 -
43 -(((
44 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
45 -)))
46 -
47 -(((
48 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
49 -)))
50 -
51 -(((
52 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
53 -)))
54 -
55 -
56 -
57 -== ​1.2  Features ==
58 -
59 -
60 60  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
61 61  * Open/Close detect
62 62  * Open/Close statistics
63 63  * Monitor Battery Level
64 -* connect two door sensors
31 +* Uplink on periodically and open/close event
65 65  * Datalog feature
66 -* Uplink periodically
33 +* Uplink on periodically
67 67  * Downlink to change configure
68 68  * Wall Mountable
69 69  * Outdoor Use
... ... @@ -70,45 +70,16 @@
70 70  * Ultra-Low Power consumption
71 71  * AT Commands to change parameters
72 72  * Micro SIM card slot for NB-IoT SIM
73 -* 8500mAh Battery for long-term use
40 +* 8500mAh Battery for long term use
74 74  
42 +**1.3  Specification**
75 75  
44 +**Common DC Characteristics:**
76 76  
77 -== 1.3  Storage & Operation ==
78 -
79 -
80 -Temperature -40°C to +85°C
81 -
82 -
83 -== 1.4  Mechanical ==
84 -
85 -
86 -[[image:image-20221117114937-4.png]]
87 -
88 -
89 -[[image:image-20221117114949-5.png]]
90 -
91 -
92 -[[image:image-20221117115010-6.png]]
93 -
94 -
95 -
96 -== 1.5 ​ Applications ==
97 -
98 -
99 -[[image:image-20221117114842-3.png]]
100 -
101 -
102 -
103 -== 1.6  Specification ==
104 -
105 -
106 -(% style="color:blue" %)**Common DC Characteristics:**
107 -
108 108  * Supply Voltage: 2.1v ~~ 3.6v
109 109  * Operating Temperature: -40 ~~ 85°C
110 110  
111 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
112 112  
113 113  * - B1 @H-FDD: 2100MHz
114 114  * - B3 @H-FDD: 1800MHz
... ... @@ -117,344 +117,261 @@
117 117  * - B20 @H-FDD: 800MHz
118 118  * - B28 @H-FDD: 700MHz
119 119  
58 +**1.4 Installation**
120 120  
60 +Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
121 121  
122 -== 1.7  Pin Definitions and Switch ==
62 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png]] [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image002.png]] ​
123 123  
64 +**1.5 ​Applications**
124 124  
125 -[[image:image-20221021110429-4.png]]
66 +* Open/Close Detection
67 +* Pulse meter application
68 +* Dry Contact Detection
126 126  
70 +**1.6 Mechanical**
127 127  
128 -=== 1.7.1  Pin Definition ===
72 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image003.png]]
129 129  
74 +**~ 1.7 Pin Definitions and Switch**
130 130  
131 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
76 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image004.png]]
132 132  
78 +**1.7.1 Pin Definition**
133 133  
134 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
80 +CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
135 135  
82 +**1.7.2 Jumper JP2(Power ON/OFF)**
136 136  
84 +
137 137  Power on Device when putting this jumper.
138 138  
139 139  
140 -=== 1.7.3  BOOT MODE / SW1 ===
141 141  
89 +**1.7.3 BOOT MODE / SW1**
142 142  
143 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
144 144  
145 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
92 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
146 146  
94 +2) Flash: work mode, the device starts to work and send out console output for further debug
147 147  
148 -=== 1.7.4  Reset Button ===
149 149  
150 150  
151 -Press to reboot the device.
98 +**1.7.4 Reset Button**
152 152  
153 153  
154 -=== 1.7.5  LED ===
101 +Press to reboot the device.
155 155  
156 156  
157 -The LED will blink when :
158 158  
159 -1.  Boot the device in flash mode
105 +**1.7.5 LED**
160 160  
161 -2.  Send an uplink packet
162 162  
108 +It will flash:
163 163  
164 -== 1.8  Magnet Distance ==
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
165 165  
166 166  
167 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
114 +**2.  Use CPN01 to communicate with IoT Server**
168 168  
169 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
116 +**2.1  How it works**
170 170  
118 +The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
171 171  
172 -= 2.  Use NDS03A to communicate with IoT Server =
120 +The diagram below shows the working flow in default firmware of CPN01:
173 173  
174 -== 2.1  How it works ==
122 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image005.png||alt="说明: image-20220708101605-2.png"]]
175 175  
124 +**2.2 ​ Configure the CPN01**
176 176  
177 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
126 +**2.2.1 Test Requirement**
178 178  
179 -The diagram below shows the working flow in the default firmware of NDS03A:
128 +To use CPN01 in your city, make sure meet below requirements:
180 180  
181 -[[image:image-20221021110615-5.png]]
182 -
183 -
184 -== 2.2 ​ Configure NDS03A ==
185 -
186 -=== 2.2.1 Test Requirement ===
187 -
188 -
189 -To use NDS03A in your city, make sure to meet below requirements:
190 -
191 -* Your local operator has already distributed an NB-IoT Network.
192 -* The local NB-IoT network used the band that NDS03A supports.
130 +* Your local operator has already distributed a NB-IoT Network there.
131 +* The local NB-IoT network used the band that CPN01 supports.
193 193  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
194 194  
195 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
196 196  
197 -[[image:image-20221117142300-1.png]]
136 + ​
198 198  
138 +**2.2.2 Insert SIM card**
199 199  
200 -=== 2.2.2 Insert NB-IoT SIM card ===
201 -
202 -
203 203  Insert the NB-IoT Card get from your provider.
204 204  
205 -User needs to take out the NB-IoT module and insert the SIM card like below:
142 +User need to take out the NB-IoT module and insert the SIM card like below:
206 206  
207 -[[image:image-20221021110745-6.png]] ​
144 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image006.png||alt="说明: 1657249468462-536.png"]] ​
208 208  
146 +**2.2.3 Connect USB – TTL to CPN01 to configure it**
209 209  
210 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
148 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
211 211  
150 +**Connection:**
212 212  
213 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
152 + USB TTL GND <~-~-~-~-> GND
214 214  
215 -(% style="color:blue" %)**Connection:**
154 + USB TTL TXD <~-~-~-~-> UART_RXD
216 216  
217 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
156 + USB TTL RXD <~-~-~-~-> UART_TXD
218 218  
219 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
220 -
221 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
222 -
223 -
224 224  In the PC, use below serial tool settings:
225 225  
226 -* Baud:  (% style="color:red" %)**9600**
160 +* Baud:  **9600**
161 +* Data bits:** 8**
162 +* Stop bits: **1**
163 +* Parity:  **None**
164 +* Flow Control: **None**
227 227  
228 -* Data bits:** (% style="color:red" %)8(%%)**
166 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
229 229  
230 -* Stop bits: (% style="color:red" %)**1**
168 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image007.png]]
231 231  
232 -* Parity:  (% style="color:red" %)**None**
170 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
233 233  
234 -* Flow Control: (% style="color:red" %)**None**
172 +**2.2.4 Use CoAP protocol to uplink data**
235 235  
236 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
174 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
237 237  
238 -​[[image:image-20221021110817-7.png]]
176 +**Use below commands:**
239 239  
240 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
178 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
179 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
180 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
241 241  
242 -
243 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
244 -
245 -
246 -
247 -=== 2.2.4 Use CoAP protocol to uplink data ===
248 -
249 -
250 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
251 -
252 -
253 -(% style="color:blue" %)**Use below commands in NDS03A:**
254 -
255 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
256 -
257 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
258 -
259 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
260 -
261 261  For parameter description, please refer to AT command set
262 262  
263 -[[image:image-20221021110948-8.png]]
184 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image008.png]]
264 264  
186 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
265 265  
266 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
188 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image009.png]] ​
267 267  
268 -[[image:image-20221118103547-9.png||height="605" width="837"]] ​
190 +**2.2.5 Use UDP protocol to uplink data(Default protocol)**
269 269  
192 +This feature is supported since firmware version v1.0.1
270 270  
194 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
195 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
196 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
271 271  
272 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
198 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image010.png]]
273 273  
200 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image011.png||alt="说明: 1657249930215-289.png"]]
274 274  
275 -(% style="color:blue" %)**AT Commands:**
276 -
277 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
278 -
279 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
280 -
281 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
282 -
283 -​ [[image:image-20221021111025-10.png]]
284 -
285 -
286 -[[image:image-20221021111033-11.png||height="241" width="576"]]
287 -
288 288  ​
289 289  
204 +**2.2.6 Use MQTT protocol to uplink data**
290 290  
291 -=== 2.2.6 Use MQTT protocol to uplink data ===
206 +This feature is supported since firmware version v110
292 292  
208 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
209 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
210 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
211 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
212 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
213 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
214 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
293 293  
294 -(% style="color:blue" %)**AT Commands:**
216 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image012.png]]
295 295  
296 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
218 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image013.png]]
297 297  
298 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
299 -
300 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
301 -
302 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
303 -
304 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
305 -
306 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
307 -
308 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
309 -
310 -​ [[image:image-20221118103445-7.png]]
311 -
312 -
313 -[[image:image-20221118103453-8.png||height="608" width="841"]]
314 -
315 315  ​
316 316  
317 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
222 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
318 318  
224 +**2.2.7 Use TCP protocol to uplink data**
319 319  
226 +This feature is supported since firmware version v110
320 320  
321 -=== 2.2.7 Use TCP protocol to uplink data ===
228 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
229 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
322 322  
231 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image014.png]]
323 323  
324 -(% style="color:blue" %)**AT Commands:**
233 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image015.png||alt="说明: 1657250255956-604.png"]]
325 325  
326 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
327 -
328 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
329 -
330 -​ [[image:image-20221021111125-14.png]]
331 -
332 -[[image:image-20221021111131-15.png]]
333 -
334 334  ​
335 335  
237 +**2.2.8 Change Update Interval**
336 336  
337 -=== 2.2.8 Change Update Interval ===
239 +User can use below command to change the **uplink interval**.
338 338  
241 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
339 339  
340 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
243 +**NOTE:**
341 341  
342 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
245 +**~1. By default, the device will send an uplink message every 1 hour.**
343 343  
344 -(% style="color:red" %)**NOTE:**
247 +**2.3  Uplink Payload**
345 345  
346 -1.  By default, the device will send an uplink message every 4 hour.
249 +In this mode, uplink payload includes 87 bytes in total by default.
347 347  
251 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
348 348  
253 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
254 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
349 349  
350 -== 2.3  Uplink Payload ==
351 351  
257 +|2|2|4|8 group
258 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
352 352  
353 -The uplink payload includes 26 bytes in total by default.
260 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
354 354  
355 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
262 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image016.png]]
356 356  
357 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
358 -
359 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
360 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
361 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
362 -
363 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
364 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
365 -**1-32 group**
366 -)))
367 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
368 -
369 -
370 -
371 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
372 -
373 -
374 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
375 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
376 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
377 -
378 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
379 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
380 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
381 -
382 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
383 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
384 -**1-32 group**
385 -)))
386 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
387 -
388 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
389 -
390 -[[image:image-20221117145932-2.png]]
391 -
392 -
393 393  The payload is ASCII string, representative same HEX:
394 394  
395 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
266 +0xf86778705021331700640c7817010001000000090000026315537b 0100000b02000002663510fed0100000e0200000263510f39010000000000000063510e85010000000000000063510d2e010000000000000063510c7a010000000000000063510bc6010000000000000063510954010000000000000063510882 where:
396 396  
397 -**where:**
268 +* **Device ID: 0x f867787050213317 = f867787050213317**
269 +* **Version: 0x0064=100=1.0.0**
398 398  
399 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
271 +* **BAT: 0x0c78 = 3192 mV = 3.192V**
272 +* **Singal: 0x17 = 23**
273 +* **Mod: 0x01 = 1**
274 +* **Calculate Flag: 0x00= 0**
275 +* **Contact Status: 0x00= 0**
276 +* **Alarm:0x00 =0**
277 +* **Total pulse:0x09 =0**
278 +* **The last open duration:0x02 =2**
279 +* **Time stamp : 0x6315537b =1662342011**
280 +* **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000b0200002663510fed**
281 +* **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000e0200002663510f39,.......**
400 400  
401 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
283 +**2.4  Payload Explanation and Sensor Interface**
402 402  
403 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
285 +**2.4.1  Device ID**
404 404  
405 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
287 +By default, the Device ID equal to the last 15 bits of IMEI.
406 406  
407 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
289 +User can use **AT+DEUI** to set Device ID
408 408  
409 -* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
410 -
411 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
412 -
413 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
414 -
415 -* (% style="color:#037691" %)**last open time:  **(%%)0x000017 =23
416 -
417 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
418 -
419 -
420 -
421 -== 2.4  Payload Explanation and Sensor Interface ==
422 -
423 -=== 2.4.1  Device ID ===
424 -
425 -
426 -By default, the Device ID is equal to the last 15 bits of IMEI.
427 -
428 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
429 -
430 430  **Example:**
431 431  
432 432  AT+DEUI=868411056754138
433 433  
434 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
295 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
435 435  
297 +**2.4.2  Version Info**
436 436  
437 -=== 2.4.2  Version Info ===
299 +Specify the software version: 0x64=100, means firmware version 1.00.
438 438  
301 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
439 439  
440 -Specify the software version: 0x64=100, which means firmware version 1.00.
303 +**2.4.3  Battery Info**
441 441  
442 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
305 +Check the battery voltage for CPN01.
443 443  
444 -
445 -=== 2.4.3  Battery Info ===
446 -
447 -
448 -Check the battery voltage for NDS03A.
449 -
450 450  Ex1: 0x0B45 = 2885mV
451 451  
452 452  Ex2: 0x0B49 = 2889mV
453 453  
311 +**2.4.4  Signal Strength**
454 454  
455 -=== 2.4.4  Signal Strength ===
456 -
457 -
458 458  NB-IoT Network signal Strength.
459 459  
460 460  **Ex1: 0x1d = 29**
... ... @@ -469,46 +469,58 @@
469 469  
470 470  **99**    Not known or not detectable
471 471  
327 +**2.4.5 Calculate Flag**
472 472  
473 -=== 2.4.5  Disalarm: (default: 0) ===
329 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
474 474  
331 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
475 475  
476 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
333 +Default value: 0. 
477 477  
478 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
335 +Range (6 bits): (b)000000 ~~ (b) 111111
479 479  
480 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
337 +**2.4.6  Alarm**
481 481  
339 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
482 482  
483 -=== 2.4.6  Keep Status & Keep Time ===
341 +**2.4.7 Contact Status**
484 484  
343 +0: Open
485 485  
486 -Shows the configure value of Alarm Base on Timeout Feature
345 +1: Close
487 487  
347 +**2.4.8 Total pulse**
488 488  
489 -=== 2.4.7  Timestamp ===
349 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
490 490  
351 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
491 491  
492 -Timestamp : 0x6315537b =1662342011
353 +**2.4.9 The last open duration**
493 493  
355 +Dry Contact last open duration.
494 494  
495 -=== 2.4.8  Switch Dual Channel Mode ===
357 +Unit: min.
496 496  
359 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image017.png]]
497 497  
498 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
499 499  
362 +**2.4.10  Timestamp**
500 500  
501 -== 2.5  Downlink Payload ==
364 +Time stamp : 0x6315537b =1662342011
502 502  
366 +Convert Unix timestamp to time 2022-9-5 9:40:11.
503 503  
504 -By default, NDS03A prints the downlink payload to console port.
368 +**~ **
505 505  
506 -[[image:image-20221021111414-18.png]] ​
370 +**2.5  Downlink Payload**
507 507  
372 +By default, CPN01 prints the downlink payload to console port.
508 508  
374 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image018.png||alt="说明: image-20220708133731-5.png"]] ​
375 +
509 509  **Examples:**
510 510  
511 -* (% style="color:#037691" %)**Set TDC**
378 +* **Set TDC**
512 512  
513 513  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
514 514  
... ... @@ -516,237 +516,178 @@
516 516  
517 517  Payload:    01 00 00 3C    TDC=60S
518 518  
519 -* (% style="color:#037691" %)**Reset**
386 +* **Reset**
520 520  
521 -If payload = 0x04FF, it will reset the NDS03A
388 +If payload = 0x04FF, it will reset the NSE01
522 522  
523 -* (% style="color:#037691" %)**INTMOD**
390 +* **INTMOD**
524 524  
525 525  Downlink Payload: 06000003, Set AT+INTMOD=3
526 526  
394 +**2.6  ​LED Indicator**
527 527  
528 -== 2.6  ​LED Indicator ==
396 +The CPN01 has an internal LED which is to show the status of different state.
529 529  
530 -
531 -The NDS03A has an internal LED which is to show the status of different states.
532 -
533 -* When the device starts normally, the LED will light up for 1 second.
534 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
398 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
399 +* Then the LED will be on for 1 second means device is boot normally.
400 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
535 535  * For each uplink probe, LED will be on for 500ms.
536 536  
403 +**2.7 ** Alarm Base on Timeout
537 537  
405 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
538 538  
539 -== 2.7  Alarm Base on Timeout ==
540 540  
408 +**~1. Keep Status: Status to be monitor**
541 541  
542 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
543 -
544 -
545 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
546 -
547 547  Keep Status = 1: Monitor Close to Open event
548 548  
549 549  Keep Status = 0: Monitor Open to Close event
550 550  
551 551  
552 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
415 +**2. Keep Time: Timeout to send an Alarm**
553 553  
554 554  Range 0 ~~ 65535(0xFFFF) seconds.
555 555  
556 556  If keep time = 0, Disable Alarm Base on Timeout feature.
557 557  
558 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
421 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
559 559  
560 560  
561 -(% style="color:blue" %)**AT Command to configure:**
424 +**AT Command** to configure:
562 562  
563 -(% style="color:blue" %)**PB14 PIN:**
426 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
564 564  
565 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
428 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
566 566  
567 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
430 +**2.8** Set debug mode
568 568  
569 -
570 -(% style="color:blue" %)**PB15 PIN:**
571 -
572 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
573 -
574 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
575 -
576 -
577 -== 2.8  Set debug mode ==
578 -
579 -
580 580  Feature: Enable or Disable debug mode
581 581  
582 -(% style="color:blue" %)**AT Command: AT+DEBUG**
583 583  
584 -[[image:image-20221021111629-21.png]]
435 +**AT Command: AT+DEBUG**
585 585  
437 +|**Command Example**|**Function**|**Response**
438 +|AT+DEBUG =0|Disable debug mode to 0|OK
439 +|AT+ DEBUG =1|Enable debug mode to 1|OK
586 586  
441 +== 2.9 Clear Flash Record ==
587 587  
588 -== 2.9  Clear Flash Record ==
589 -
590 -
591 591  Feature: Clear flash storage for data log feature.
592 592  
593 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
445 +**AT Command: AT+CLRDTA**
594 594  
595 -[[image:image-20221021111527-19.png]]
447 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image019.png||alt="说明: image-20220609151132-7.png"]]
596 596  
449 +**~ 2.10 **Set trigger mode
597 597  
451 +➢ AT Command: **AT+TTRMOD**
598 598  
599 -== 2.10  Count Mod ==
453 +Feature: Set the trigger interrupt mode.
600 600  
455 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image020.png||alt="说明: image-20220609151344-9.png"]]
601 601  
602 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
457 +**2.11** Set the calculate flag
603 603  
604 -[[image:image-20221118092935-1.png]]
459 +Feature: Set the calculate flag
605 605  
461 +**AT Command: AT+CALCFLAG**
606 606  
463 +|**Command Example**|**Function**|**Response**
464 +|AT+CALCFLAG =1|Set the calculate flag to 1.|OK
465 +|AT+CALCFLAG =2|Set the calculate flag to 2.|OK
607 607  
608 -== 2.11  Interrupt Pin Channel Mod ==
467 +**2.12** Set count number
609 609  
469 +Feature: Manually set the count number
610 610  
611 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
471 +**AT Command: AT+SETCNT**
612 612  
613 -[[image:image-20221118093144-2.png]]
473 +|**Command Example**|**Function**|**Response**
474 +|AT+ SETCNT =0|Set the count number to 0.|OK
475 +|AT+ SETCNT =100|Set the count number to 100.|OK
614 614  
615 615  
478 +**2.13 Set the number of data to be uploaded and the recording time**
616 616  
617 -== 2.12 TTRIG1/2 timeout status alarm ==
480 +➢ AT Command:
618 618  
482 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
619 619  
620 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
621 621  
622 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
485 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
623 623  
624 -[[image:image-20221118093512-3.png]]
487 +**2.14 Read or Clear cached data**
625 625  
489 +➢ AT Command:
626 626  
491 +AT+CDP    ~/~/ Read cached data
627 627  
628 -== 2.13  Select counting mode ==
493 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image021.png]]
629 629  
630 630  
631 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
496 +AT+CDP=0    ~/~/ Clear cached data ​
632 632  
633 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
498 +**2.15  ​Firmware Change Log**
634 634  
635 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
500 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
636 636  
637 -[[image:image-20221118093658-4.png]]
502 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
638 638  
504 +**2.16  ​Battery Analysis**
639 639  
506 +**2.16.1  ​Battery Type**
640 640  
508 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
641 641  
642 -== 2.14  Set the number of data to be uploaded and the recording time ==
510 +The battery is designed to last for several years depends on the actually use environment and update interval. 
643 643  
512 +The battery related documents as below:
644 644  
645 -(% style="color:blue" %)**AT Command:**
646 -
647 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
648 -
649 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
650 -
651 -
652 -== 2.15  Read or Clear cached data ==
653 -
654 -
655 -(% style="color:blue" %)**AT Command:**
656 -
657 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
658 -
659 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
660 -
661 -[[image:image-20221118094227-5.png]]
662 -
663 -
664 -
665 -== 2.16  ​Firmware Change Log ==
666 -
667 -
668 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
669 -
670 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
671 -
672 -
673 -
674 -== 2.17  ​Battery Analysis ==
675 -
676 -
677 -=== 2.17.1  ​Battery Type ===
678 -
679 -
680 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
681 -
682 -The battery is designed to last for several years depends on the actual use environment and update interval. 
683 -
684 -The battery-related documents as below:
685 -
686 686  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
687 -
688 688  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
689 -
690 690  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
691 691  
692 -[[image:image-20221021111911-26.png]] ​
518 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image022.png||alt="说明: image-20220708140453-6.png"]] ​
693 693  
520 +**2.16.2  Power consumption Analyze**
694 694  
695 -
696 -=== 2.17.2  Power consumption Analyze ===
697 -
698 -
699 699  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
700 700  
701 701  Instruction to use as below:
702 702  
703 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
526 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
704 704  
705 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
528 +**Step 2: ** Open it and choose
706 706  
707 707  * Product Model
708 -
709 709  * Uplink Interval
710 -
711 711  * Working Mode
712 712  
713 713  And the Life expectation in difference case will be shown on the right.
714 714  
715 -[[image:1666596205057-567.png]] ​
536 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image023.jpg||alt="说明: image-20220708141352-7.jpeg"]] ​
716 716  
538 +**2.16.3  ​Battery Note**
717 717  
718 -
719 -=== 2.17.3  ​Battery Note ===
720 -
721 -
722 722  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
723 723  
542 +**2.16.4  Replace the battery**
724 724  
544 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
725 725  
726 -=== 2.17.4  Replace the battery ===
546 +**3. ​ Access NB-IoT Module**
727 727  
728 -
729 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
730 -
731 -
732 -
733 -= 3. ​ Access NB-IoT Module =
734 -
735 -
736 736  Users can directly access the AT command set of the NB-IoT module.
737 737  
738 738  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
739 739  
740 -[[image:image-20221118094449-6.png]] ​
552 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image024.png||alt="说明: 1657261278785-153.png"]] ​
741 741  
554 +**4.  Using the AT Commands**
742 742  
556 +**4.1  Access AT Commands**
743 743  
744 -= 4.  Using the AT Commands =
745 -
746 -
747 -== 4.1  Access AT Commands ==
748 -
749 -
750 750  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
751 751  
752 752  AT+<CMD>?  : Help on <CMD>
... ... @@ -757,9 +757,8 @@
757 757  
758 758  AT+<CMD>=?  : Get the value
759 759  
568 +**General Commands**      
760 760  
761 -(% style="color:blue" %)**General Commands**      
762 -
763 763  AT  : Attention       
764 764  
765 765  AT?  : Short Help     
... ... @@ -782,41 +782,35 @@
782 782  
783 783  AT+SERVADDR  : Server Address
784 784  
785 -AT+TR      :  Get or Set record time
592 +AT+TR      : Get or Set record time"
786 786  
594 +
787 787  AT+NOUD      : Get or Set the number of data to be uploaded
788 788  
789 -AT+CDP     :  Read or Clear cached data
790 790  
791 -AT+ DEBUG   : Enable or Disable debug mode
598 +AT+CDP     : Read or Clear cached data
792 792  
793 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
794 794  
795 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
601 +AT+ DEBUG   : Enable or Disable debug mode
796 796  
797 -AT+COUNTMOD  :  Get or Set the count mode
603 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
798 798  
799 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
605 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
800 800  
801 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
607 +AT+ CALCFLAG   : Get or Set the calculate flag
802 802  
803 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
609 +AT+ CLRC   : Clear current door open count
804 804  
805 -AT+ CLRC   :  Clear current door open count
611 +**COAP Management**      
806 806  
807 -
808 -(% style="color:blue" %)**COAP Management**      
809 -
810 810  AT+URI            : Resource parameters
811 811  
615 +**UDP Management**
812 812  
813 -(% style="color:blue" %)**UDP Management**
814 -
815 815  AT+CFM          : Upload confirmation mode (only valid for UDP)
816 816  
619 +**MQTT Management**
817 817  
818 -(% style="color:blue" %)**MQTT Management**
819 -
820 820  AT+CLIENT               : Get or Set MQTT client
821 821  
822 822  AT+UNAME  : Get or Set MQTT Username
... ... @@ -827,65 +827,86 @@
827 827  
828 828  AT+SUBTOPIC  : Get or Set MQTT subscription topic
829 829  
631 +**Information**          
830 830  
831 -(% style="color:blue" %)**Information**          
832 -
833 833  AT+FDR  : Factory Data Reset
834 834  
835 835  AT+PWORD  : Serial Access Password
836 836  
637 +**​5.  FAQ**
837 837  
639 +**5.1 ​ How to Upgrade Firmware**
838 838  
839 -= ​5.  FAQ =
641 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
840 840  
643 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
841 841  
842 -== 5.1 ​ How to Upgrade Firmware ==
645 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
843 843  
647 +**5.2  Can I calibrate CPN01 to different soil types?**
844 844  
845 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
649 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
846 846  
847 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
651 +**6.  Trouble Shooting**
848 848  
849 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
653 +**6.1  ​Connection problem when uploading firmware**
850 850  
655 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
851 851  
657 +**6.2  AT Command input doesn't work**
852 852  
853 -= 6.  Trouble Shooting =
659 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
854 854  
661 +**7. ​ Order Info**
855 855  
856 -== 6.1  ​Connection problem when uploading firmware ==
663 +Part Number**:** CPN01
857 857  
665 +**8.  Packing Info**
858 858  
859 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
667 +**Package Includes**:
860 860  
669 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
670 +* External antenna x 1
861 861  
672 +**Dimension and weight**:
862 862  
863 -== 6.2  AT Command input doesn't work ==
674 +* Size: 195 x 125 x 55 mm
675 +* Weight:   420g
864 864  
677 +**9.  Support**
865 865  
866 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
679 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
680 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
867 867  
682 +​
868 868  
869 869  
870 -= 7. ​ Order Info =
871 871  
872 872  
873 -Part Number**:** NDS03A
874 874  
875 875  
876 876  
877 -= 8.  Packing Info =
878 878  
879 879  
880 -(% style="color:blue" %)**Package Includes**:
881 881  
882 -* NDS03A Open/Close Door Sensor x 1
883 883  
884 -= 9.  Support =
885 885  
886 886  
887 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
888 888  
889 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
890 890  
891 -​
698 +
699 +
700 +
701 +
702 +
703 +
704 +
705 +
706 +
707 +
708 +
709 +
710 +
711 +
712 +
713 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221021111911-26.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.7 KB
Content
image-20221021111923-27.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -130.6 KB
Content
image-20221021112006-28.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0