Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 70.25 >
edited by Xiaoling
on 2022/12/07 16:40
To version < 40.1 >
edited by Edwin Chen
on 2022/10/23 00:07
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,71 +1,34 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 -
5 -
6 -
7 -
8 -
9 -
10 -**Table of Contents：**
11 -
12 12  {{toc/}}
13 13  
6 += **1. Introduction** =
14 14  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
15 15  
10 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
16 16  
12 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
17 17  
18 -= 1.  Introduction =
14 +CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
19 19  
20 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
16 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
21 21  
18 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
19 +\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
20 +\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
21 +\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
22 22  
23 -(((
24 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
25 -)))
23 +​
26 26  
27 -(((
28 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
29 -)))
25 +== **​1.2 Features** ==
30 30  
31 -(((
32 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
33 -)))
34 -
35 -(((
36 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -)))
38 -
39 -(((
40 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
41 -)))
42 -
43 -(((
44 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
45 -)))
46 -
47 -(((
48 -NDS03A supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
49 -)))
50 -
51 -(((
52 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
53 -)))
54 -
55 -(((
56 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
57 -)))
58 -
59 -
60 -
61 -== ​1.2  Features ==
62 -
63 -
64 64  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
65 65  * Open/Close detect
66 66  * Open/Close statistics
67 67  * Monitor Battery Level
68 -* connect two door sensors
31 +* Uplink on periodically and open/close event
69 69  * Datalog feature
70 70  * Uplink periodically
71 71  * Downlink to change configure
... ... @@ -76,134 +76,107 @@
76 76  * Micro SIM card slot for NB-IoT SIM
77 77  * 8500mAh Battery for long-term use
78 78  
42 +== **1.3  Specification** ==
79 79  
44 +**Common DC Characteristics:**
80 80  
81 -== 1.3  Storage & Operation ==
46 +* Supply Voltage: 2.1v ~~ 3.6v
47 +* Operating Temperature: -40 ~~ 85°C
82 82  
49 +**NB-IoT Spec:**
83 83  
84 -Temperature -40°C to +85°C
51 +* - B1 @H-FDD: 2100MHz
52 +* - B3 @H-FDD: 1800MHz
53 +* - B8 @H-FDD: 900MHz
54 +* - B5 @H-FDD: 850MHz
55 +* - B20 @H-FDD: 800MHz
56 +* - B28 @H-FDD: 700MHz
85 85  
58 +== **1.4 Installation** ==
86 86  
87 -== 1.4  Mechanical ==
60 +Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
88 88  
62 +[[image:image-20221021110329-1.png]]
89 89  
90 -[[image:image-20221117114937-4.png]]
64 +[[image:image-20221022234602-2.png||height="288" width="922"]]
91 91  
92 92  
93 -[[image:image-20221117114949-5.png]]
67 +== **1.5 ​Applications** ==
94 94  
69 +* Open/Close Detection
70 +* Pulse meter application
71 +* Dry Contact Detection
95 95  
96 -[[image:image-20221117115010-6.png]]
73 +== **1.6 Mechanical** ==
97 97  
75 +​[[image:image-20221021110415-3.png]]
98 98  
77 +== ** 1.7 Pin Definitions and Switch** ==
99 99  
100 -== 1.5 ​ Applications ==
101 -
102 -
103 -[[image:image-20221117114842-3.png]]
104 -
105 -
106 -
107 -== 1.6  Specification ==
108 -
109 -
110 -(% style="color:blue" %)**Common DC Characteristics:**
111 -
112 -* Supply Voltage: 2.1v ~~ 3.6v
113 -* Operating Temperature: -40 ~~ 85°C
114 -
115 -(% style="color:blue" %)**NB-IoT Spec:**
116 -
117 -* B1 @H-FDD: 2100MHz
118 -* B3 @H-FDD: 1800MHz
119 -* B8 @H-FDD: 900MHz
120 -* B5 @H-FDD: 850MHz
121 -* B20 @H-FDD: 800MHz
122 -* B28 @H-FDD: 700MHz
123 -
124 -
125 -
126 -== 1.7  Pin Definitions and Switch ==
127 -
128 -
129 129  [[image:image-20221021110429-4.png]]
130 130  
81 +=== **1.7.1 Pin Definition** ===
131 131  
132 -=== 1.7.1  Pin Definition ===
83 +CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
133 133  
134 134  
135 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
86 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
136 136  
137 -
138 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
139 -
140 -
141 141  Power on Device when putting this jumper.
142 142  
143 143  
144 -=== 1.7.3  BOOT MODE / SW1 ===
91 +=== **1.7.3 BOOT MODE / SW1** ===
145 145  
146 146  
147 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
148 148  
149 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
96 +2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
150 150  
151 151  
152 -=== 1.7.4  Reset Button ===
99 +=== **1.7.4 Reset Button** ===
153 153  
154 154  
155 155  Press to reboot the device.
156 156  
157 157  
158 -=== 1.7.5  LED ===
105 +=== **1.7.5 LED** ===
159 159  
160 160  
161 161  The LED will blink when :
162 162  
163 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
164 164  
165 -2.  Send an uplink packet
166 166  
114 += **2.  Use CPN01 to communicate with IoT Server** =
167 167  
168 -== 1.8  Magnet Distance ==
116 +== **2.1  How it works** ==
169 169  
118 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
170 170  
171 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
120 +The diagram below shows the working flow in the default firmware of CPN01:
172 172  
173 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
174 -
175 -
176 -= 2.  Use NDS03A to communicate with IoT Server =
177 -
178 -== 2.1  How it works ==
179 -
180 -
181 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
182 -
183 -The diagram below shows the working flow in the default firmware of NDS03A:
184 -
185 185  [[image:image-20221021110615-5.png]]
186 186  
187 187  
188 -== 2.2 ​ Configure NDS03A ==
125 +== **2.2 ​ Configure CPN01** ==
189 189  
190 -=== 2.2.1 Test Requirement ===
127 +=== **2.2.1 Test Requirement** ===
191 191  
129 +To use CPN01 in your city, make sure to meet below requirements:
192 192  
193 -To use NDS03A in your city, make sure to meet below requirements:
194 -
195 195  * Your local operator has already distributed an NB-IoT Network.
196 -* The local NB-IoT network used the band that NDS03A supports.
132 +* The local NB-IoT network used the band that CPN01 supports.
197 197  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
198 198  
199 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
135 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
200 200  
201 -[[image:image-20221117142300-1.png]]
137 +[[image:image-20221023000439-3.png]]
202 202  
139 + ​
203 203  
204 -=== 2.2.2 Insert NB-IoT SIM card ===
141 +=== **2.2.2 Insert SIM card** ===
205 205  
206 -
207 207  Insert the NB-IoT Card get from your provider.
208 208  
209 209  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -211,123 +211,94 @@
211 211  [[image:image-20221021110745-6.png]] ​
212 212  
213 213  
214 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
150 +=== **2.2.3 Connect USB – TTL to CPN01 to configure it** ===
215 215  
152 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
216 216  
217 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
154 +**Connection:**
218 218  
219 -(% style="color:blue" %)**Connection:**
156 + USB TTL GND <~-~-~-~-> GND
220 220  
221 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
158 + USB TTL TXD <~-~-~-~-> UART_RXD
222 222  
223 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
160 + USB TTL RXD <~-~-~-~-> UART_TXD
224 224  
225 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
226 -
227 -
228 228  In the PC, use below serial tool settings:
229 229  
230 -* Baud:  (% style="color:red" %)**9600**
164 +* Baud:  **9600**
165 +* Data bits:** 8**
166 +* Stop bits: **1**
167 +* Parity:  **None**
168 +* Flow Control: **None**
231 231  
232 -* Data bits:** (% style="color:red" %)8(%%)**
170 +Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:yellow" %)**Yellow Jumper**(%%).
233 233  
234 -* Stop bits: (% style="color:red" %)**1**
235 -
236 -* Parity:  (% style="color:red" %)**None**
237 -
238 -* Flow Control: (% style="color:red" %)**None**
239 -
240 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
241 -
242 242  ​[[image:image-20221021110817-7.png]]
243 243  
244 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
174 +CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
245 245  
246 246  
247 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
177 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
248 248  
179 +=== **2.2.4 Use CoAP protocol to uplink data** ===
249 249  
181 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
250 250  
251 -=== 2.2.4 Use CoAP protocol to uplink data ===
183 +**Use below commands:**
252 252  
185 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
186 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
187 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
253 253  
254 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
255 -
256 -
257 -(% style="color:blue" %)**Use below commands in NDS03A:**
258 -
259 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
260 -
261 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
262 -
263 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
264 -
265 265  For parameter description, please refer to AT command set
266 266  
267 267  [[image:image-20221021110948-8.png]]
268 268  
193 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
269 269  
270 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
195 +[[image:image-20221021110956-9.png]] ​
271 271  
272 -[[image:image-20221118103547-9.png||height="605" width="837"]] ​
197 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
273 273  
199 +This feature is supported since firmware version v1.0.1
274 274  
275 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
201 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
202 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
203 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
276 276  
277 -
278 -(% style="color:blue" %)**AT Commands:**
279 -
280 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
281 -
282 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
283 -
284 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
285 -
286 286  ​ [[image:image-20221021111025-10.png]]
287 287  
288 -
289 289  [[image:image-20221021111033-11.png||height="241" width="576"]]
290 290  
291 291  ​
292 292  
293 -=== 2.2.6 Use MQTT protocol to uplink data ===
211 +=== **2.2.6 Use MQTT protocol to uplink data** ===
294 294  
213 +This feature is supported since firmware version v110
295 295  
296 -(% style="color:blue" %)**AT Commands:**
215 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
216 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
217 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
218 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
219 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
220 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
221 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
297 297  
298 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
223 +​ [[image:image-20221021111058-12.png]]
299 299  
300 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
225 +[[image:image-20221021111108-13.png]]
301 301  
302 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
303 -
304 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
305 -
306 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
307 -
308 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
309 -
310 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
311 -
312 -​ [[image:image-20221118103445-7.png]]
313 -
314 -
315 -[[image:image-20221118103453-8.png||height="608" width="841"]]
316 -
317 317  ​
318 318  
319 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
229 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
320 320  
231 +=== **2.2.7 Use TCP protocol to uplink data** ===
321 321  
322 -=== 2.2.7 Use TCP protocol to uplink data ===
233 +This feature is supported since firmware version v110
323 323  
235 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
236 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
324 324  
325 -(% style="color:blue" %)**AT Commands:**
326 -
327 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
328 -
329 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
330 -
331 331  ​ [[image:image-20221021111125-14.png]]
332 332  
333 333  [[image:image-20221021111131-15.png]]
... ... @@ -334,124 +334,93 @@
334 334  
335 335  ​
336 336  
337 -=== 2.2.8 Change Update Interval ===
244 +=== **2.2.8 Change Update Interval** ===
338 338  
246 +User can use below command to change the **uplink interval**.
339 339  
340 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
248 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
341 341  
342 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
250 +**NOTE:**
343 343  
344 -(% style="color:red" %)**NOTE:**
252 +**~1. By default, the device will send an uplink message every 1 hour.**
345 345  
346 -1.  By default, the device will send an uplink message every 4 hour.
254 +== **2.3  Uplink Payload** ==
347 347  
256 +In this mode, uplink payload includes 87 bytes in total by default.
348 348  
349 -== 2.3  Uplink Payload ==
258 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
350 350  
260 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
261 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
351 351  
352 -The uplink payload includes 26 bytes in total by default.
263 +|2|2|4|8 group
264 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
353 353  
354 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
266 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
355 355  
356 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
268 +[[image:image-20221021111201-16.png||height="572" width="792"]]
357 357  
358 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
359 -|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:50px" %)**1**|(% style="width:60px" %)**1**|(% style="width:90px" %)**3**|(% style="width:100px" %)**3**
360 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
361 -
362 -(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
363 -|(% style="width:50px" %)**4**|(% style="width:90px" %)**1**|(% style="width:90px" %)**3**|(% style="width:90px" %)**3**|(% style="width:60px" %)4|(% style="width:50px" %)(((
364 -**1-32 group**
365 -)))
366 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
367 -
368 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
369 -
370 -
371 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
372 -|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:45px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:60px" %)**1**|(% style="width:60px" %)**1**|(% style="width:87px" %)**3**|(% style="width:80px" %)**3**
373 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
374 -
375 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
376 -|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:75px" %)**1**|(% style="width:75px" %)**3**
377 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
378 -
379 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
380 -|(% style="width:100px" %)**3**|(% style="width:80px" %)**1**|(% style="width:90px" %)**3**|(% style="width:90px" %)**3**|(% style="width:70px" %)**4**|(% style="width:80px" %)(((
381 -**1-32 group**
382 -)))
383 -|(% style="width:102px" %)last open time(pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:100px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
384 -
385 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
386 -
387 -[[image:image-20221117145932-2.png]]
388 -
389 -
390 390  The payload is ASCII string, representative same HEX:
391 391  
392 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
272 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
393 393  
394 -**where:**
274 +where:
275 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
395 395  
396 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
277 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
397 397  
398 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
279 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
399 399  
400 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
281 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
401 401  
402 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
283 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
403 403  
404 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
285 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00= 0
405 405  
406 -* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
287 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00= 0
407 407  
408 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
289 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
409 409  
410 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
291 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
411 411  
412 -* (% style="color:#037691" %)**last open time:   **(%%)0x000017 =23
293 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
413 413  
414 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
295 +*(% style="color:#037691" %)**Time stamp :**(%%) 0x6315537b =1662342011
415 415  
297 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000b0200002663510fed
416 416  
299 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
417 417  
418 -== 2.4  Payload Explanation and Sensor Interface ==
301 +== **2.4  Payload Explanation and Sensor Interface** ==
419 419  
420 -=== 2.4.1  Device ID ===
303 +=== **2.4.1  Device ID** ===
421 421  
305 +By default, the Device ID equal to the last 15 bits of IMEI.
422 422  
423 -By default, the Device ID is equal to the last 15 bits of IMEI.
307 +User can use **AT+DEUI** to set Device ID
424 424  
425 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
426 -
427 427  **Example:**
428 428  
429 429  AT+DEUI=868411056754138
430 430  
431 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
313 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
432 432  
315 +=== **2.4.2  Version Info** ===
433 433  
434 -=== 2.4.2  Version Info ===
317 +Specify the software version: 0x64=100, means firmware version 1.00.
435 435  
319 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
436 436  
437 -Specify the software version: 0x64=100, which means firmware version 1.00.
321 +=== **2.4.3  Battery Info** ===
438 438  
439 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
323 +Check the battery voltage for CPN01.
440 440  
441 -
442 -=== 2.4.3  Battery Info ===
443 -
444 -
445 -Check the battery voltage for NDS03A.
446 -
447 447  Ex1: 0x0B45 = 2885mV
448 448  
449 449  Ex2: 0x0B49 = 2889mV
450 450  
329 +=== **2.4.4  Signal Strength** ===
451 451  
452 -=== 2.4.4  Signal Strength ===
453 -
454 -
455 455  NB-IoT Network signal Strength.
456 456  
457 457  **Ex1: 0x1d = 29**
... ... @@ -466,46 +466,58 @@
466 466  
467 467  **99**    Not known or not detectable
468 468  
345 +=== **2.4.5 Calculate Flag** ===
469 469  
470 -=== 2.4.5  Disalarm: (default: 0) ===
347 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
471 471  
349 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
472 472  
473 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
351 +Default value: 0. 
474 474  
475 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
353 +Range (6 bits): (b)000000 ~~ (b) 111111
476 476  
477 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
355 +=== **2.4.6  Alarm** ===
478 478  
357 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
479 479  
480 -=== 2.4.6  Keep Status & Keep Time ===
359 +=== **2.4.7 Contact Status** ===
481 481  
361 +0: Open
482 482  
483 -Shows the configure value of Alarm Base on Timeout Feature
363 +1: Close
484 484  
365 +=== **2.4.8 Total pulse** ===
485 485  
486 -=== 2.4.7  Timestamp ===
367 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
487 487  
369 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
488 488  
489 -Timestamp : 0x6315537b =1662342011
371 +=== **2.4.9 The last open duration** ===
490 490  
373 +Dry Contact last open duration.
491 491  
492 -=== 2.4.8  Switch Dual Channel Mode ===
375 +Unit: min.
493 493  
377 +[[image:image-20221021111346-17.png||height="146" width="770"]]
494 494  
495 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
496 496  
380 +=== **2.4.10  Timestamp** ===
497 497  
498 -== 2.5  Downlink Payload ==
382 +Time stamp : 0x6315537b =1662342011
499 499  
384 +Convert Unix timestamp to time 2022-9-5 9:40:11.
500 500  
501 -By default, NDS03A prints the downlink payload to console port.
386 +**~ **
502 502  
503 -[[image:image-20221021111414-18.png]] ​
388 +== **2.5  Downlink Payload** ==
504 504  
390 +By default, CPN01 prints the downlink payload to console port.
505 505  
392 +[[image:image-20221021111414-18.png]] ​
393 +
506 506  **Examples:**
507 507  
508 -* (% style="color:#037691" %)**Set TDC**
396 +* **Set TDC**
509 509  
510 510  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
511 511  
... ... @@ -513,223 +513,171 @@
513 513  
514 514  Payload:    01 00 00 3C    TDC=60S
515 515  
516 -* (% style="color:#037691" %)**Reset**
404 +* **Reset**
517 517  
518 -If payload = 0x04FF, it will reset the NDS03A
406 +If payload = 0x04FF, it will reset the NSE01
519 519  
520 -* (% style="color:#037691" %)**INTMOD**
408 +* **INTMOD**
521 521  
522 522  Downlink Payload: 06000003, Set AT+INTMOD=3
523 523  
412 +== **2.6  ​LED Indicator** ==
524 524  
525 -== 2.6  ​LED Indicator ==
414 +The CPN01 has an internal LED which is to show the status of different state.
526 526  
527 -
528 -The NDS03A has an internal LED which is to show the status of different states.
529 -
530 -* When the device starts normally, the LED will light up for 1 second.
531 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
416 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
417 +* Then the LED will be on for 1 second means device is boot normally.
418 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
532 532  * For each uplink probe, LED will be on for 500ms.
533 533  
421 +== **2.7  Alarm Base on Timeout** ==
534 534  
423 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
535 535  
536 -== 2.7  Alarm Base on Timeout ==
537 537  
426 +**~1. Keep Status: Status to be monitor**
538 538  
539 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
540 -
541 -
542 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
543 -
544 544  Keep Status = 1: Monitor Close to Open event
545 545  
546 546  Keep Status = 0: Monitor Open to Close event
547 547  
548 548  
549 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
433 +**2. Keep Time: Timeout to send an Alarm**
550 550  
551 551  Range 0 ~~ 65535(0xFFFF) seconds.
552 552  
553 553  If keep time = 0, Disable Alarm Base on Timeout feature.
554 554  
555 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
439 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
556 556  
557 557  
558 -(% style="color:blue" %)**AT Command to configure:**
442 +**AT Command** to configure:
559 559  
560 -(% style="color:blue" %)**PB14 PIN:**
444 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
561 561  
562 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
446 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
563 563  
564 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
448 +== **2.8 Set debug mode** ==
565 565  
566 -
567 -(% style="color:blue" %)**PB15 PIN:**
568 -
569 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
570 -
571 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
572 -
573 -
574 -== 2.8  Set debug mode ==
575 -
576 -
577 577  Feature: Enable or Disable debug mode
578 578  
579 -(% style="color:blue" %)**AT Command: AT+DEBUG**
580 580  
453 +**AT Command: AT+DEBUG**
454 +
581 581  [[image:image-20221021111629-21.png]]
582 582  
457 +== **2.9 Clear Flash Record** ==
583 583  
584 -
585 -== 2.9  Clear Flash Record ==
586 -
587 -
588 588  Feature: Clear flash storage for data log feature.
589 589  
590 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
461 +**AT Command: AT+CLRDTA**
591 591  
592 592  [[image:image-20221021111527-19.png]]
593 593  
465 +== ** 2.10 Set trigger mode** ==
594 594  
595 -== 2.10  Count Mod ==
467 +➢ AT Command: **AT+TTRMOD**
596 596  
469 +Feature: Set the trigger interrupt mode.
597 597  
598 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
471 +[[image:image-20221021111552-20.png]]
599 599  
600 -[[image:image-20221118092935-1.png]]
473 +== **2.11 Set the calculate flag** ==
601 601  
475 +Feature: Set the calculate flag
602 602  
603 -== 2.11  Interrupt Pin Channel Mod ==
477 +**AT Command: AT+CALCFLAG**
604 604  
479 +[[image:image-20221021111711-22.png]]
605 605  
606 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
481 +== **2.12 Set count number** ==
607 607  
608 -[[image:image-20221118093144-2.png]]
483 +Feature: Manually set the count number
609 609  
485 +**AT Command: AT+SETCNT**
610 610  
611 -== 2.12 TTRIG1/2 timeout status alarm ==
487 +[[image:image-20221021111748-24.png]]
612 612  
489 +== **2.13 Set the number of data to be uploaded and the recording time** ==
613 613  
614 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
491 +➢ AT Command:
615 615  
616 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
493 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
617 617  
618 -[[image:image-20221118093512-3.png]]
619 619  
496 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
620 620  
621 -== 2.13  Select counting mode ==
498 +== **2.14 Read or Clear cached data** ==
622 622  
500 +➢ AT Command:
623 623  
624 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
502 +AT+CDP    ~/~/ Read cached data
625 625  
626 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
504 +[[image:image-20221021111810-25.png||height="364" width="797"]]
627 627  
628 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
629 629  
630 -[[image:image-20221118093658-4.png]]
507 +AT+CDP=0    ~/~/ Clear cached data ​
631 631  
509 +== **2.15  ​Firmware Change Log** ==
632 632  
633 -== 2.14  Set the number of data to be uploaded and the recording time ==
511 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
634 634  
513 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
635 635  
636 -(% style="color:blue" %)**AT Command:**
515 +== **2.16  ​Battery Analysis** ==
637 637  
638 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
517 +=== **2.16.1  ​Battery Type** ===
639 639  
640 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
519 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
641 641  
521 +The battery is designed to last for several years depends on the actually use environment and update interval. 
642 642  
643 -== 2.15  Read or Clear cached data ==
523 +The battery related documents as below:
644 644  
645 -
646 -(% style="color:blue" %)**AT Command:**
647 -
648 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
649 -
650 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
651 -
652 -[[image:image-20221118094227-5.png]]
653 -
654 -
655 -== 2.16  ​Firmware Change Log ==
656 -
657 -
658 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
659 -
660 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
661 -
662 -
663 -== 2.17  ​Battery Analysis ==
664 -
665 -=== 2.17.1  ​Battery Type ===
666 -
667 -
668 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
669 -
670 -The battery is designed to last for several years depends on the actual use environment and update interval. 
671 -
672 -The battery-related documents as below:
673 -
674 674  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
675 -
676 676  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
677 -
678 678  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
679 679  
680 680  [[image:image-20221021111911-26.png]] ​
681 681  
531 +=== **2.16.2  Power consumption Analyze** ===
682 682  
683 -=== 2.17.2  Power consumption Analyze ===
684 -
685 -
686 686  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
687 687  
688 688  Instruction to use as below:
689 689  
690 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
537 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
691 691  
692 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
539 +**Step 2: ** Open it and choose
693 693  
694 694  * Product Model
695 -
696 696  * Uplink Interval
697 -
698 698  * Working Mode
699 699  
700 700  And the Life expectation in difference case will be shown on the right.
701 701  
702 -[[image:1666596205057-567.png]] ​
547 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
703 703  
549 +=== **2.16.3  ​Battery Note** ===
704 704  
705 -=== 2.17.3  ​Battery Note ===
706 -
707 -
708 708  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
709 709  
553 +=== **2.16.4  Replace the battery** ===
710 710  
711 -=== 2.17.4  Replace the battery ===
555 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
712 712  
557 += **3. ​ Access NB-IoT Module** =
713 713  
714 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
715 -
716 -
717 -= 3. ​ Access NB-IoT Module =
718 -
719 -
720 720  Users can directly access the AT command set of the NB-IoT module.
721 721  
722 722  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
723 723  
563 +[[image:image-20221021112006-28.png]] ​
724 724  
725 -[[image:image-20221118094449-6.png]] ​
565 += **4.  Using the AT Commands** =
726 726  
567 +== **4.1  Access AT Commands** ==
727 727  
728 -= 4.  Using the AT Commands =
729 -
730 -== 4.1  Access AT Commands ==
731 -
732 -
733 733  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
734 734  
735 735  AT+<CMD>?  : Help on <CMD>
... ... @@ -740,9 +740,8 @@
740 740  
741 741  AT+<CMD>=?  : Get the value
742 742  
579 +**General Commands**      
743 743  
744 -(% style="color:blue" %)**General Commands**      
745 -
746 746  AT  : Attention       
747 747  
748 748  AT?  : Short Help     
... ... @@ -765,41 +765,35 @@
765 765  
766 766  AT+SERVADDR  : Server Address
767 767  
768 -AT+TR      :  Get or Set record time
603 +AT+TR      : Get or Set record time"
769 769  
605 +
770 770  AT+NOUD      : Get or Set the number of data to be uploaded
771 771  
772 -AT+CDP     :  Read or Clear cached data
773 773  
774 -AT+ DEBUG   : Enable or Disable debug mode
609 +AT+CDP     : Read or Clear cached data
775 775  
776 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
777 777  
778 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
612 +AT+ DEBUG   : Enable or Disable debug mode
779 779  
780 -AT+COUNTMOD  :  Get or Set the count mode
614 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
781 781  
782 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
616 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
783 783  
784 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
618 +AT+ CALCFLAG   : Get or Set the calculate flag
785 785  
786 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
620 +AT+ CLRC   : Clear current door open count
787 787  
788 -AT+ CLRC   :  Clear current door open count
622 +**COAP Management**      
789 789  
790 -
791 -(% style="color:blue" %)**COAP Management**      
792 -
793 793  AT+URI            : Resource parameters
794 794  
626 +**UDP Management**
795 795  
796 -(% style="color:blue" %)**UDP Management**
797 -
798 798  AT+CFM          : Upload confirmation mode (only valid for UDP)
799 799  
630 +**MQTT Management**
800 800  
801 -(% style="color:blue" %)**MQTT Management**
802 -
803 803  AT+CLIENT               : Get or Set MQTT client
804 804  
805 805  AT+UNAME  : Get or Set MQTT Username
... ... @@ -810,60 +810,86 @@
810 810  
811 811  AT+SUBTOPIC  : Get or Set MQTT subscription topic
812 812  
642 +**Information**          
813 813  
814 -(% style="color:blue" %)**Information**          
815 -
816 816  AT+FDR  : Factory Data Reset
817 817  
818 818  AT+PWORD  : Serial Access Password
819 819  
648 += **​5.  FAQ** =
820 820  
821 -= ​5.  FAQ =
650 +== **5.1 ​ How to Upgrade Firmware** ==
822 822  
823 -== 5.1 ​ How to Upgrade Firmware ==
824 -
825 -
826 826  User can upgrade the firmware for 1) bug fix, 2) new feature release.
827 827  
828 828  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
829 829  
830 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
656 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
831 831  
658 +== **5.2  Can I calibrate CPN01 to different soil types?** ==
832 832  
833 -= 6.  Trouble Shooting =
660 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
834 834  
835 -== 6.1  ​Connection problem when uploading firmware ==
662 += **6.  Trouble Shooting** =
836 836  
664 +== **6.1  ​Connection problem when uploading firmware** ==
837 837  
838 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
666 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
839 839  
668 +== **6.2  AT Command input doesn't work** ==
840 840  
841 -== 6.2  AT Command input doesn't work ==
670 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
842 842  
672 += **7. ​ Order Info** =
843 843  
844 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
674 +Part Number**:** CPN01
845 845  
676 += **8.  Packing Info** =
846 846  
847 -= 7. ​ Order Info =
678 +**Package Includes**:
848 848  
680 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
681 +* External antenna x 1
849 849  
850 -Part Number**:** NDS03A
683 +**Dimension and weight**:
851 851  
685 +* Size: 195 x 125 x 55 mm
686 +* Weight:   420g
852 852  
853 -= 8.  Packing Info =
688 += **9.  Support** =
854 854  
690 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
691 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
855 855  
856 -(% style="color:blue" %)**Package Includes**:
693 +​
857 857  
858 -* NDS03A Open/Close Door Sensor x 1
859 859  
860 860  
861 861  
862 -= 9.  Support =
863 863  
864 864  
865 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
866 866  
867 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
868 868  
869 -​
702 +
703 +
704 +
705 +
706 +
707 +
708 +
709 +
710 +
711 +
712 +
713 +
714 +
715 +
716 +
717 +
718 +
719 +
720 +
721 +
722 +
723 +
724 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0