Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 70.22 >
edited by Xiaoling
on 2022/11/18 11:25
To version < 45.1 >
edited by David Huang
on 2022/10/24 09:16
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,67 +1,34 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 -
5 -
6 -
7 -
8 -
9 -
10 -**Table of Contents：**
11 -
12 12  {{toc/}}
13 13  
6 += **1. Introduction** =
14 14  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
15 15  
10 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
16 16  
12 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
17 17  
18 -= 1.  Introduction =
14 +CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
19 19  
20 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
16 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
21 21  
18 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
19 +\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
20 +\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
21 +\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
22 22  
23 -(((
24 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
25 -)))
23 +​
26 26  
27 -(((
28 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
29 -)))
25 +== **​1.2 Features** ==
30 30  
31 -(((
32 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
33 -)))
34 -
35 -(((
36 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -)))
38 -
39 -(((
40 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
41 -)))
42 -
43 -(((
44 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
45 -)))
46 -
47 -(((
48 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
49 -)))
50 -
51 -(((
52 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
53 -)))
54 -
55 -
56 -
57 -== ​1.2  Features ==
58 -
59 -
60 60  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
61 61  * Open/Close detect
62 62  * Open/Close statistics
63 63  * Monitor Battery Level
64 -* connect two door sensors
31 +* Uplink on periodically and open/close event
65 65  * Datalog feature
66 66  * Uplink periodically
67 67  * Downlink to change configure
... ... @@ -72,43 +72,14 @@
72 72  * Micro SIM card slot for NB-IoT SIM
73 73  * 8500mAh Battery for long-term use
74 74  
42 +== **1.3  Specification** ==
75 75  
44 +**Common DC Characteristics:**
76 76  
77 -== 1.3  Storage & Operation ==
78 -
79 -
80 -Temperature -40°C to +85°C
81 -
82 -
83 -== 1.4  Mechanical ==
84 -
85 -
86 -[[image:image-20221117114937-4.png]]
87 -
88 -
89 -[[image:image-20221117114949-5.png]]
90 -
91 -
92 -[[image:image-20221117115010-6.png]]
93 -
94 -
95 -
96 -== 1.5 ​ Applications ==
97 -
98 -
99 -[[image:image-20221117114842-3.png]]
100 -
101 -
102 -
103 -== 1.6  Specification ==
104 -
105 -
106 -(% style="color:blue" %)**Common DC Characteristics:**
107 -
108 108  * Supply Voltage: 2.1v ~~ 3.6v
109 109  * Operating Temperature: -40 ~~ 85°C
110 110  
111 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
112 112  
113 113  * - B1 @H-FDD: 2100MHz
114 114  * - B3 @H-FDD: 1800MHz
... ... @@ -117,89 +117,90 @@
117 117  * - B20 @H-FDD: 800MHz
118 118  * - B28 @H-FDD: 700MHz
119 119  
58 +== **1.4 Installation** ==
120 120  
60 +Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
121 121  
122 -== 1.7  Pin Definitions and Switch ==
62 +[[image:image-20221021110329-1.png]]
123 123  
64 +[[image:image-20221022234602-2.png||height="288" width="922"]]
124 124  
125 -[[image:image-20221021110429-4.png]]
126 126  
67 +== **1.5 ​Applications** ==
127 127  
128 -=== 1.7.1  Pin Definition ===
69 +* Open/Close Detection
70 +* Pulse meter application
71 +* Dry Contact Detection
129 129  
73 +== **1.6 Mechanical** ==
130 130  
131 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
75 +​[[image:image-20221021110415-3.png]]
132 132  
77 +== ** 1.7 Pin Definitions and Switch** ==
133 133  
134 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
79 +[[image:image-20221021110429-4.png]]
135 135  
81 +=== **1.7.1 Pin Definition** ===
136 136  
83 +CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
84 +
85 +
86 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
87 +
137 137  Power on Device when putting this jumper.
138 138  
139 139  
140 -=== 1.7.3  BOOT MODE / SW1 ===
91 +=== **1.7.3 BOOT MODE / SW1** ===
141 141  
142 142  
143 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
144 144  
145 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
96 +2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
146 146  
147 147  
148 -=== 1.7.4  Reset Button ===
99 +=== **1.7.4 Reset Button** ===
149 149  
150 150  
151 151  Press to reboot the device.
152 152  
153 153  
154 -=== 1.7.5  LED ===
105 +=== **1.7.5 LED** ===
155 155  
156 156  
157 157  The LED will blink when :
158 158  
159 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
160 160  
161 -2.  Send an uplink packet
113 += **2.  Use CPN01 to communicate with IoT Server** =
162 162  
115 +== **2.1  How it works** ==
163 163  
164 -== 1.8  Magnet Distance ==
117 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
165 165  
119 +The diagram below shows the working flow in the default firmware of CPN01:
166 166  
167 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
168 -
169 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
170 -
171 -
172 -= 2.  Use NDS03A to communicate with IoT Server =
173 -
174 -== 2.1  How it works ==
175 -
176 -
177 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
178 -
179 -The diagram below shows the working flow in the default firmware of NDS03A:
180 -
181 181  [[image:image-20221021110615-5.png]]
182 182  
183 183  
184 -== 2.2 ​ Configure NDS03A ==
124 +== **2.2 ​ Configure CPN01** ==
185 185  
186 -=== 2.2.1 Test Requirement ===
126 +=== **2.2.1 Test Requirement** ===
187 187  
128 +To use CPN01 in your city, make sure to meet below requirements:
188 188  
189 -To use NDS03A in your city, make sure to meet below requirements:
190 -
191 191  * Your local operator has already distributed an NB-IoT Network.
192 -* The local NB-IoT network used the band that NDS03A supports.
131 +* The local NB-IoT network used the band that CPN01 supports.
193 193  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
194 194  
195 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
196 196  
197 -[[image:image-20221117142300-1.png]]
136 +[[image:image-20221023000439-3.png]]
198 198  
138 + ​
199 199  
200 -=== 2.2.2 Insert NB-IoT SIM card ===
140 +=== **2.2.2 Insert NB-IoT SIM card** ===
201 201  
202 -
203 203  Insert the NB-IoT Card get from your provider.
204 204  
205 205  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -207,123 +207,101 @@
207 207  [[image:image-20221021110745-6.png]] ​
208 208  
209 209  
210 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
149 +=== **2.2.3 Connect USB – TTL to CPN01 and configure it** ===
211 211  
151 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
212 212  
213 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
153 +**Connection:**
214 214  
215 -(% style="color:blue" %)**Connection:**
155 + USB TTL GND <~-~-~-~-> GND
216 216  
217 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
157 + USB TTL TXD <~-~-~-~-> UART_RXD
218 218  
219 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
159 + USB TTL RXD <~-~-~-~-> UART_TXD
220 220  
221 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
222 -
223 -
224 224  In the PC, use below serial tool settings:
225 225  
226 -* Baud:  (% style="color:red" %)**9600**
163 +* Baud:  **9600**
164 +* Data bits:** 8**
165 +* Stop bits: **1**
166 +* Parity:  **None**
167 +* Flow Control: **None**
227 227  
228 -* Data bits:** (% style="color:red" %)8(%%)**
169 +Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
229 229  
230 -* Stop bits: (% style="color:red" %)**1**
231 -
232 -* Parity:  (% style="color:red" %)**None**
233 -
234 -* Flow Control: (% style="color:red" %)**None**
235 -
236 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
237 -
238 238  ​[[image:image-20221021110817-7.png]]
239 239  
240 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
173 +CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
241 241  
242 242  
243 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
244 244  
245 245  
179 +=== **2.2.4 Use CoAP protocol to uplink data** ===
246 246  
247 -=== 2.2.4 Use CoAP protocol to uplink data ===
181 +**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
248 248  
249 249  
250 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
184 +**Use below commands in CPN01:**
251 251  
186 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
187 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ Set CoAP server address and port
188 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set CoAP resource path
252 252  
253 -(% style="color:blue" %)**Use below commands in NDS03A:**
254 -
255 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
256 -
257 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
258 -
259 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
260 -
261 261  For parameter description, please refer to AT command set
262 262  
263 263  [[image:image-20221021110948-8.png]]
264 264  
265 265  
266 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
195 +After configuring the server address and **reset CPN01** (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
267 267  
268 -[[image:image-20221118103547-9.png||height="605" width="837"]] ​
197 +[[image:image-20221021110956-9.png]] ​
269 269  
270 270  
271 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
200 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
272 272  
273 273  
274 -(% style="color:blue" %)**AT Commands:**
203 +**AT Commands:**
275 275  
276 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
205 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
206 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ Set UDP server address and port
207 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
277 277  
278 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
279 -
280 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
281 -
282 282  ​ [[image:image-20221021111025-10.png]]
283 283  
284 -
285 285  [[image:image-20221021111033-11.png||height="241" width="576"]]
286 286  
287 287  ​
288 288  
289 -=== 2.2.6 Use MQTT protocol to uplink data ===
215 +=== **2.2.6 Use MQTT protocol to uplink data** ===
290 290  
291 291  
292 -(% style="color:blue" %)**AT Commands:**
218 +**AT Commands:**
293 293  
294 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
220 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
221 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
222 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
223 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
224 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
225 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
226 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
295 295  
296 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
228 +​ [[image:image-20221021111058-12.png]]
297 297  
298 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
230 +[[image:image-20221021111108-13.png]]
299 299  
300 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
301 -
302 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
303 -
304 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
305 -
306 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
307 -
308 -​ [[image:image-20221118103445-7.png]]
309 -
310 -
311 -[[image:image-20221118103453-8.png||height="608" width="841"]]
312 -
313 313  ​
314 314  
315 315  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
316 316  
317 317  
318 -=== 2.2.7 Use TCP protocol to uplink data ===
237 +=== **2.2.7 Use TCP protocol to uplink data** ===
319 319  
239 +**AT Commands**
320 320  
321 -(% style="color:blue" %)**AT Commands:**
241 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
242 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ Set TCP server address and port
322 322  
323 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
324 -
325 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
326 -
327 327  ​ [[image:image-20221021111125-14.png]]
328 328  
329 329  [[image:image-20221021111131-15.png]]
... ... @@ -330,96 +330,73 @@
330 330  
331 331  ​
332 332  
333 -=== 2.2.8 Change Update Interval ===
250 +=== **2.2.8 Change Update Interval** ===
334 334  
252 +User can use below command to change the **uplink interval**.
335 335  
336 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
254 +* **AT+TDC=7200      ** ~/~/ Set Update Interval to 7200s (2 hours)
337 337  
338 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
256 +**NOTE:**
339 339  
340 -(% style="color:red" %)**NOTE:**
258 +**~1. By default, the device will send an uplink message every 1 hour.**
341 341  
342 -1.  By default, the device will send an uplink message every 4 hour.
343 343  
261 +== **2.3  Uplink Payload** ==
344 344  
345 -== 2.3  Uplink Payload ==
263 +The uplink payload includes 123 bytes in total by default.
346 346  
265 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
347 347  
348 -The uplink payload includes 26 bytes in total by default.
267 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**1**|**1**|**3**
268 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[ Calculate Flag>>path:#H2.4.8A0DigitalInterrupt]]|Contact Status|Alarm|Total pulse
349 349  
350 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
270 +(% style="width:1201px" %)
271 +|**3**|**4**|**1**|**3**|**1**|**3**|4|**8 group**|(% style="width:1px" %)
272 +|The last open duration|Time stamp|Contact Status|Total pulse|Calculate Flag|The last open duration|Time stamp|...|(% style="width:1px" %)
351 351  
352 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
274 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
353 353  
354 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
355 -|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:50px" %)**1**|(% style="width:60px" %)**1**|(% style="width:90px" %)**3**|(% style="width:100px" %)**3**
356 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
276 +[[image:image-20221021111201-16.png||height="572" width="792"]]
357 357  
358 -(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
359 -|(% style="width:50px" %)**4**|(% style="width:90px" %)**1**|(% style="width:90px" %)**3**|(% style="width:90px" %)**3**|(% style="width:60px" %)4|(% style="width:50px" %)(((
360 -**1-32 group**
361 -)))
362 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
363 -
364 -
365 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
366 -
367 -
368 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
369 -|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:45px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:60px" %)**1**|(% style="width:60px" %)**1**|(% style="width:87px" %)**3**|(% style="width:80px" %)**3**
370 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
371 -
372 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
373 -|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:75px" %)**1**|(% style="width:75px" %)**3**
374 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
375 -
376 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
377 -|(% style="width:100px" %)**3**|(% style="width:80px" %)**1**|(% style="width:90px" %)**3**|(% style="width:90px" %)**3**|(% style="width:70px" %)**4**|(% style="width:80px" %)(((
378 -**1-32 group**
379 -)))
380 -|(% style="width:102px" %)last open time(pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:100px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
381 -
382 -
383 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
384 -
385 -[[image:image-20221117145932-2.png]]
386 -
387 -
388 388  The payload is ASCII string, representative same HEX:
389 389  
390 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
280 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
391 391  
392 -**where:**
282 +where:
283 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
393 393  
394 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
285 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
395 395  
396 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
287 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
397 397  
398 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
289 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
399 399  
400 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
291 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
401 401  
402 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
293 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00=0
403 403  
404 -* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
295 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00=0
405 405  
406 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
297 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
407 407  
408 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
299 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
409 409  
410 -* (% style="color:#037691" %)**last open time:   **(%%)0x000017 =23
301 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
411 411  
412 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
303 +*(% style="color:#037691" %)** Time stamp :**(%%) 0x6315537b =1662342011 (Unix Time)
413 413  
305 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 01  00000b  02  000026  63510fed
414 414  
415 -== 2.4  Payload Explanation and Sensor Interface ==
307 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
416 416  
417 -=== 2.4.1  Device ID ===
418 418  
310 +== **2.4  Payload Explanation and Sensor Interface** ==
419 419  
312 +=== **2.4.1  Device ID** ===
313 +
420 420  By default, the Device ID is equal to the last 15 bits of IMEI.
421 421  
422 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
316 +User can use **AT+DEUI** to set Device ID
423 423  
424 424  **Example:**
425 425  
... ... @@ -428,27 +428,24 @@
428 428  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
429 429  
430 430  
431 -=== 2.4.2  Version Info ===
325 +=== **2.4.2  Version Info** ===
432 432  
433 -
434 434  Specify the software version: 0x64=100, which means firmware version 1.00.
435 435  
436 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
329 +For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
437 437  
438 438  
439 -=== 2.4.3  Battery Info ===
332 +=== **2.4.3  Battery Info** ===
440 440  
334 +Check the battery voltage for CPN01.
441 441  
442 -Check the battery voltage for NDS03A.
443 -
444 444  Ex1: 0x0B45 = 2885mV
445 445  
446 446  Ex2: 0x0B49 = 2889mV
447 447  
448 448  
449 -=== 2.4.4  Signal Strength ===
341 +=== **2.4.4  Signal Strength** ===
450 450  
451 -
452 452  NB-IoT Network signal Strength.
453 453  
454 454  **Ex1: 0x1d = 29**
... ... @@ -464,45 +464,62 @@
464 464  **99**    Not known or not detectable
465 465  
466 466  
467 -=== 2.4.5  Disalarm: (default: 0) ===
358 +=== **2.4.5 Calculate Flag** ===
468 468  
360 +The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
469 469  
470 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
362 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
471 471  
472 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
364 +Default value: 0. 
473 473  
474 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
366 +Range (6 bits): (b)000000 ~~ (b) 111111
475 475  
476 476  
477 -=== 2.4.6  Keep Status & Keep Time ===
369 +=== **2.4.6  Alarm** ===
478 478  
371 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
479 479  
480 -Shows the configure value of Alarm Base on Timeout Feature
481 481  
374 +=== **2.4.7 Contact Status** ===
482 482  
483 -=== 2.4.7  Timestamp ===
376 +0: Open
484 484  
378 +1: Close
485 485  
486 -Timestamp : 0x6315537b =1662342011
487 487  
381 +=== **2.4.8 Total pulse** ===
488 488  
489 -=== 2.4.8  Switch Dual Channel Mode ===
383 +Total pulse/counting based on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
490 490  
385 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
491 491  
492 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
493 493  
388 +=== **2.4.9 The last open duration** ===
494 494  
495 -== 2.5  Downlink Payload ==
390 +Dry Contact last open duration.
496 496  
392 +Unit: min.
497 497  
498 -By default, NDS03A prints the downlink payload to console port.
394 +[[image:image-20221021111346-17.png||height="146" width="770"]]
499 499  
500 -[[image:image-20221021111414-18.png]] ​
501 501  
397 +=== **2.4.10  Timestamp** ===
502 502  
399 +Timestamp : 0x6315537b =1662342011
400 +
401 +Convert Unix timestamp to time 2022-9-5 9:40:11.
402 +
403 +**~ **
404 +
405 +== **2.5  Downlink Payload** ==
406 +
407 +By default, CPN01 prints the downlink payload to console port.
408 +
409 +[[image:image-20221021111414-18.png]] ​
410 +
503 503  **Examples:**
504 504  
505 -* (% style="color:#037691" %)**Set TDC**
413 +* **Set TDC**
506 506  
507 507  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
508 508  
... ... @@ -510,222 +510,172 @@
510 510  
511 511  Payload:    01 00 00 3C    TDC=60S
512 512  
513 -* (% style="color:#037691" %)**Reset**
421 +* **Reset**
514 514  
515 -If payload = 0x04FF, it will reset the NDS03A
423 +If payload = 0x04FF, it will reset the NSE01
516 516  
517 -* (% style="color:#037691" %)**INTMOD**
425 +* **INTMOD**
518 518  
519 519  Downlink Payload: 06000003, Set AT+INTMOD=3
520 520  
429 +== **2.6  ​LED Indicator** ==
521 521  
522 -== 2.6  ​LED Indicator ==
431 +The CPN01 has an internal LED which is to show the status of different states.
523 523  
524 -
525 -The NDS03A has an internal LED which is to show the status of different states.
526 -
527 527  * When the device starts normally, the LED will light up for 1 second.
528 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
434 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
529 529  * For each uplink probe, LED will be on for 500ms.
530 530  
437 +== **2.7  Alarm Base on Timeout** ==
531 531  
532 -== 2.7  Alarm Base on Timeout ==
439 +CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
533 533  
534 534  
535 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
442 +**~1. Keep Status: Status to be monitor**
536 536  
537 -
538 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
539 -
540 540  Keep Status = 1: Monitor Close to Open event
541 541  
542 542  Keep Status = 0: Monitor Open to Close event
543 543  
544 544  
545 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
449 +**2. Keep Time: Timeout to send an Alarm**
546 546  
547 547  Range 0 ~~ 65535(0xFFFF) seconds.
548 548  
549 549  If keep time = 0, Disable Alarm Base on Timeout feature.
550 550  
551 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
455 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
552 552  
553 553  
554 -(% style="color:blue" %)**AT Command to configure:**
458 +**AT Command** to configure:
555 555  
556 -(% style="color:blue" %)**PB14 PIN:**
460 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
557 557  
558 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
462 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
559 559  
560 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
561 561  
465 +== **2.8 Set debug mode** ==
562 562  
563 -(% style="color:blue" %)**PB15 PIN:**
564 -
565 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
566 -
567 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
568 -
569 -
570 -== 2.8  Set debug mode ==
571 -
572 -
573 573  Feature: Enable or Disable debug mode
574 574  
575 -(% style="color:blue" %)**AT Command: AT+DEBUG**
576 576  
470 +**AT Command: AT+DEBUG**
471 +
577 577  [[image:image-20221021111629-21.png]]
578 578  
474 +== **2.9 Clear Flash Record** ==
579 579  
580 -
581 -== 2.9  Clear Flash Record ==
582 -
583 -
584 584  Feature: Clear flash storage for data log feature.
585 585  
586 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
478 +**AT Command: AT+CLRDTA**
587 587  
588 588  [[image:image-20221021111527-19.png]]
589 589  
482 +== ** 2.10 Set trigger mode** ==
590 590  
591 -== 2.10  Count Mod ==
484 +➢ AT Command: **AT+TTRMOD**
592 592  
486 +Feature: Set the trigger interrupt mode.
593 593  
594 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
488 +[[image:image-20221021111552-20.png]]
595 595  
596 -[[image:image-20221118092935-1.png]]
490 +== **2.11 Set the calculate flag** ==
597 597  
492 +Feature: Set the calculate flag
598 598  
599 -== 2.11  Interrupt Pin Channel Mod ==
494 +**AT Command: AT+CALCFLAG**
600 600  
496 +[[image:image-20221021111711-22.png]]
601 601  
602 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
498 +== **2.12 Set count number** ==
603 603  
604 -[[image:image-20221118093144-2.png]]
500 +Feature: Manually set the count number
605 605  
502 +**AT Command: AT+SETCNT**
606 606  
607 -== 2.12 TTRIG1/2 timeout status alarm ==
504 +[[image:image-20221021111748-24.png]]
608 608  
506 +== **2.13 Set the number of data to be uploaded and the recording time** ==
609 609  
610 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
508 +➢ AT Command:
611 611  
612 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
510 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
613 613  
614 -[[image:image-20221118093512-3.png]]
615 615  
513 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
616 616  
617 -== 2.13  Select counting mode ==
515 +== **2.14 Read or Clear cached data** ==
618 618  
517 +➢ AT Command:
619 619  
620 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
519 +AT+CDP    ~/~/ Read cached data
621 621  
622 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
521 +[[image:image-20221021111810-25.png||height="364" width="797"]]
623 623  
624 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
625 625  
626 -[[image:image-20221118093658-4.png]]
524 +AT+CDP=0    ~/~/ Clear cached data ​
627 627  
526 +== **2.15  ​Firmware Change Log** ==
628 628  
629 -== 2.14  Set the number of data to be uploaded and the recording time ==
528 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
630 630  
530 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
631 631  
632 -(% style="color:blue" %)**AT Command:**
532 +== **2.16  ​Battery Analysis** ==
633 633  
634 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
534 +=== **2.16.1  ​Battery Type** ===
635 635  
636 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
536 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
637 637  
638 -
639 -== 2.15  Read or Clear cached data ==
640 -
641 -
642 -(% style="color:blue" %)**AT Command:**
643 -
644 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
645 -
646 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
647 -
648 -[[image:image-20221118094227-5.png]]
649 -
650 -
651 -== 2.16  ​Firmware Change Log ==
652 -
653 -
654 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
655 -
656 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
657 -
658 -
659 -== 2.17  ​Battery Analysis ==
660 -
661 -=== 2.17.1  ​Battery Type ===
662 -
663 -
664 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
665 -
666 666  The battery is designed to last for several years depends on the actual use environment and update interval. 
667 667  
668 668  The battery-related documents as below:
669 669  
670 670  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
671 -
672 672  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
673 -
674 674  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
675 675  
676 676  [[image:image-20221021111911-26.png]] ​
677 677  
548 +=== **2.16.2  Power consumption Analyze** ===
678 678  
679 -=== 2.17.2  Power consumption Analyze ===
680 -
681 -
682 682  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
683 683  
684 684  Instruction to use as below:
685 685  
686 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
554 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
687 687  
688 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
556 +**Step 2: ** Open it and choose
689 689  
690 690  * Product Model
691 -
692 692  * Uplink Interval
693 -
694 694  * Working Mode
695 695  
696 696  And the Life expectation in difference case will be shown on the right.
697 697  
698 -[[image:1666596205057-567.png]] ​
564 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
699 699  
566 +=== **2.16.3  ​Battery Note** ===
700 700  
701 -=== 2.17.3  ​Battery Note ===
702 -
703 -
704 704  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
705 705  
570 +=== **2.16.4  Replace the battery** ===
706 706  
707 -=== 2.17.4  Replace the battery ===
572 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
708 708  
709 709  
710 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
575 += **3. ​ Access NB-IoT Module** =
711 711  
712 -
713 -= 3. ​ Access NB-IoT Module =
714 -
715 -
716 716  Users can directly access the AT command set of the NB-IoT module.
717 717  
718 718  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
719 719  
581 +[[image:image-20221021112006-28.png]] ​
720 720  
721 -[[image:image-20221118094449-6.png]] ​
583 += **4.  Using the AT Commands** =
722 722  
585 +== **4.1  Access AT Commands** ==
723 723  
724 -= 4.  Using the AT Commands =
725 -
726 -== 4.1  Access AT Commands ==
727 -
728 -
729 729  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
730 730  
731 731  AT+<CMD>?  : Help on <CMD>
... ... @@ -736,9 +736,8 @@
736 736  
737 737  AT+<CMD>=?  : Get the value
738 738  
597 +**General Commands**      
739 739  
740 -(% style="color:blue" %)**General Commands**      
741 -
742 742  AT  : Attention       
743 743  
744 744  AT?  : Short Help     
... ... @@ -761,41 +761,35 @@
761 761  
762 762  AT+SERVADDR  : Server Address
763 763  
764 -AT+TR      :  Get or Set record time
621 +AT+TR      : Get or Set record time"
765 765  
623 +
766 766  AT+NOUD      : Get or Set the number of data to be uploaded
767 767  
768 -AT+CDP     :  Read or Clear cached data
769 769  
770 -AT+ DEBUG   : Enable or Disable debug mode
627 +AT+CDP     : Read or Clear cached data
771 771  
772 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
773 773  
774 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
630 +AT+ DEBUG   : Enable or Disable debug mode
775 775  
776 -AT+COUNTMOD  :  Get or Set the count mode
632 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
777 777  
778 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
634 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
779 779  
780 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
636 +AT+ CALCFLAG   : Get or Set the calculate flag
781 781  
782 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
638 +AT+ CLRC   : Clear current door open count
783 783  
784 -AT+ CLRC   :  Clear current door open count
640 +**COAP Management**      
785 785  
786 -
787 -(% style="color:blue" %)**COAP Management**      
788 -
789 789  AT+URI            : Resource parameters
790 790  
644 +**UDP Management**
791 791  
792 -(% style="color:blue" %)**UDP Management**
793 -
794 794  AT+CFM          : Upload confirmation mode (only valid for UDP)
795 795  
648 +**MQTT Management**
796 796  
797 -(% style="color:blue" %)**MQTT Management**
798 -
799 799  AT+CLIENT               : Get or Set MQTT client
800 800  
801 801  AT+UNAME  : Get or Set MQTT Username
... ... @@ -806,60 +806,86 @@
806 806  
807 807  AT+SUBTOPIC  : Get or Set MQTT subscription topic
808 808  
660 +**Information**          
809 809  
810 -(% style="color:blue" %)**Information**          
811 -
812 812  AT+FDR  : Factory Data Reset
813 813  
814 814  AT+PWORD  : Serial Access Password
815 815  
666 += **​5.  FAQ** =
816 816  
817 -= ​5.  FAQ =
668 +== **5.1 ​ How to Upgrade Firmware** ==
818 818  
819 -== 5.1 ​ How to Upgrade Firmware ==
820 -
821 -
822 822  User can upgrade the firmware for 1) bug fix, 2) new feature release.
823 823  
824 824  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
825 825  
826 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
674 +**Notice, **CPN01 **and **CPL01 **share the same mother board. They use the same connection and method to update.**
827 827  
828 828  
829 -= 6.  Trouble Shooting =
677 += **6.  Trouble Shooting** =
830 830  
831 -== 6.1  ​Connection problem when uploading firmware ==
679 +== **6.1  ​Connection problem when uploading firmware** ==
832 832  
681 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
833 833  
834 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
835 835  
684 +== **6.2  AT Command input doesn't work** ==
836 836  
837 -== 6.2  AT Command input doesn't work ==
686 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
838 838  
839 839  
840 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
689 += **7. ​ Order Info** =
841 841  
691 +Part Number**:** CPN01
842 842  
843 -= 7. ​ Order Info =
844 844  
694 += **8.  Packing Info** =
845 845  
846 -Part Number**:** NDS03A
696 +**Package Includes**:
847 847  
698 +* CPN01 Open/Close Sensor x 1
699 +* External antenna x 1
848 848  
849 -= 8.  Packing Info =
701 +**Dimension and weight**:
850 850  
703 +* Size: 195 x 125 x 55 mm
704 +* Weight:   420g
851 851  
852 -(% style="color:blue" %)**Package Includes**:
706 += **9.  Support** =
853 853  
854 -* NDS03A Open/Close Door Sensor x 1
708 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
709 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
855 855  
711 +​
856 856  
857 857  
858 -= 9.  Support =
859 859  
860 860  
861 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
862 862  
863 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
864 864  
865 -​
718 +
719 +
720 +
721 +
722 +
723 +
724 +
725 +
726 +
727 +
728 +
729 +
730 +
731 +
732 +
733 +
734 +
735 +
736 +
737 +
738 +
739 +
740 +
741 +
742 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0