Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 70.2 >
edited by Xiaoling
on 2022/11/18 10:39
To version < 48.1 >
edited by Xiaoling
on 2022/10/24 15:23
>
Change comment: Uploaded new attachment "1666596205057-567.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Content
... ... @@ -1,67 +1,34 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 -
5 -
6 -
7 -
8 -
9 -
10 -**Table of Contents：**
11 -
12 12  {{toc/}}
13 13  
6 += **1. Introduction** =
14 14  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
15 15  
10 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
16 16  
12 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
17 17  
18 -= 1.  Introduction =
14 +CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
19 19  
20 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
16 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
21 21  
18 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
19 +\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
20 +\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
21 +\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
22 22  
23 -(((
24 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
25 -)))
23 +​
26 26  
27 -(((
28 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
29 -)))
25 +== **​1.2 Features** ==
30 30  
31 -(((
32 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
33 -)))
34 -
35 -(((
36 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -)))
38 -
39 -(((
40 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
41 -)))
42 -
43 -(((
44 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
45 -)))
46 -
47 -(((
48 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
49 -)))
50 -
51 -(((
52 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
53 -)))
54 -
55 -
56 -
57 -== ​1.2  Features ==
58 -
59 -
60 60  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
61 61  * Open/Close detect
62 62  * Open/Close statistics
63 63  * Monitor Battery Level
64 -* connect two door sensors
31 +* Uplink on periodically and open/close event
65 65  * Datalog feature
66 66  * Uplink periodically
67 67  * Downlink to change configure
... ... @@ -72,43 +72,14 @@
72 72  * Micro SIM card slot for NB-IoT SIM
73 73  * 8500mAh Battery for long-term use
74 74  
42 +== **1.3  Specification** ==
75 75  
44 +**Common DC Characteristics:**
76 76  
77 -== 1.3  Storage & Operation ==
78 -
79 -
80 -Temperature -40°C to +85°C
81 -
82 -
83 -== 1.4  Mechanical ==
84 -
85 -
86 -[[image:image-20221117114937-4.png]]
87 -
88 -
89 -[[image:image-20221117114949-5.png]]
90 -
91 -
92 -[[image:image-20221117115010-6.png]]
93 -
94 -
95 -
96 -== 1.5 ​ Applications ==
97 -
98 -
99 -[[image:image-20221117114842-3.png]]
100 -
101 -
102 -
103 -== 1.6  Specification ==
104 -
105 -
106 -(% style="color:blue" %)**Common DC Characteristics:**
107 -
108 108  * Supply Voltage: 2.1v ~~ 3.6v
109 109  * Operating Temperature: -40 ~~ 85°C
110 110  
111 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
112 112  
113 113  * - B1 @H-FDD: 2100MHz
114 114  * - B3 @H-FDD: 1800MHz
... ... @@ -117,98 +117,90 @@
117 117  * - B20 @H-FDD: 800MHz
118 118  * - B28 @H-FDD: 700MHz
119 119  
58 +== **1.4 Installation** ==
120 120  
60 +Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
121 121  
122 -== 1.7  Pin Definitions and Switch ==
62 +[[image:image-20221021110329-1.png]]
123 123  
64 +[[image:image-20221022234602-2.png||height="288" width="922"]]
124 124  
125 -[[image:image-20221021110429-4.png]]
126 126  
67 +== **1.5 ​Applications** ==
127 127  
128 -=== 1.7.1  Pin Definition ===
69 +* Open/Close Detection
70 +* Pulse meter application
71 +* Dry Contact Detection
129 129  
73 +== **1.6 Mechanical** ==
130 130  
131 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
75 +​[[image:image-20221021110415-3.png]]
132 132  
77 +== ** 1.7 Pin Definitions and Switch** ==
133 133  
79 +[[image:image-20221021110429-4.png]]
134 134  
135 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
81 +=== **1.7.1 Pin Definition** ===
136 136  
83 +CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
137 137  
138 -Power on Device when putting this jumper.
139 139  
86 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
140 140  
88 +Power on Device when putting this jumper.
141 141  
142 -=== 1.7.3  BOOT MODE / SW1 ===
143 143  
91 +=== **1.7.3 BOOT MODE / SW1** ===
144 144  
145 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
146 146  
147 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
148 148  
96 +2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
149 149  
150 150  
151 -=== 1.7.4  Reset Button ===
99 +=== **1.7.4 Reset Button** ===
152 152  
153 153  
154 154  Press to reboot the device.
155 155  
156 156  
105 +=== **1.7.5 LED** ===
157 157  
158 -=== 1.7.5  LED ===
159 159  
160 -
161 161  The LED will blink when :
162 162  
163 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
164 164  
165 -2.  Send an uplink packet
113 += **2.  Use CPN01 to communicate with IoT Server** =
166 166  
115 +== **2.1  How it works** ==
167 167  
117 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
168 168  
169 -== 1.8  Magnet Distance ==
119 +The diagram below shows the working flow in the default firmware of CPN01:
170 170  
171 -
172 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
173 -
174 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
175 -
176 -
177 -
178 -= 2.  Use NDS03A to communicate with IoT Server =
179 -
180 -== 2.1  How it works ==
181 -
182 -
183 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
184 -
185 -The diagram below shows the working flow in the default firmware of NDS03A:
186 -
187 187  [[image:image-20221021110615-5.png]]
188 188  
189 189  
124 +== **2.2 ​ Configure CPN01** ==
190 190  
191 -== 2.2 ​ Configure NDS03A ==
126 +=== **2.2.1 Test Requirement** ===
192 192  
193 -=== 2.2.1 Test Requirement ===
128 +To use CPN01 in your city, make sure to meet below requirements:
194 194  
195 -
196 -To use NDS03A in your city, make sure to meet below requirements:
197 -
198 198  * Your local operator has already distributed an NB-IoT Network.
199 -* The local NB-IoT network used the band that NDS03A supports.
131 +* The local NB-IoT network used the band that CPN01 supports.
200 200  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
201 201  
202 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
203 203  
204 -[[image:image-20221117142300-1.png]]
136 +[[image:image-20221023000439-3.png]]
205 205  
206 206   ​
207 207  
140 +=== **2.2.2 Insert NB-IoT SIM card** ===
208 208  
209 -=== 2.2.2 Insert NB-IoT SIM card ===
210 -
211 -
212 212  Insert the NB-IoT Card get from your provider.
213 213  
214 214  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -216,127 +216,101 @@
216 216  [[image:image-20221021110745-6.png]] ​
217 217  
218 218  
149 +=== **2.2.3 Connect USB – TTL to CPN01 and configure it** ===
219 219  
220 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
151 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
221 221  
153 +**Connection:**
222 222  
223 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
155 + USB TTL GND <~-~-~-~-> GND
224 224  
225 -(% style="color:blue" %)**Connection:**
157 + USB TTL TXD <~-~-~-~-> UART_RXD
226 226  
227 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
159 + USB TTL RXD <~-~-~-~-> UART_TXD
228 228  
229 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
230 -
231 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
232 -
233 -
234 234  In the PC, use below serial tool settings:
235 235  
236 -* Baud:  (% style="color:red" %)**9600**
163 +* Baud:  **9600**
164 +* Data bits:** 8**
165 +* Stop bits: **1**
166 +* Parity:  **None**
167 +* Flow Control: **None**
237 237  
238 -* Data bits:** (% style="color:red" %)8(%%)**
169 +Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
239 239  
240 -* Stop bits: (% style="color:red" %)**1**
241 -
242 -* Parity:  (% style="color:red" %)**None**
243 -
244 -* Flow Control: (% style="color:red" %)**None**
245 -
246 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
247 -
248 248  ​[[image:image-20221021110817-7.png]]
249 249  
250 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
173 +CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
251 251  
252 252  
253 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
254 254  
255 255  
179 +=== **2.2.4 Use CoAP protocol to uplink data** ===
256 256  
257 -=== 2.2.4 Use CoAP protocol to uplink data ===
181 +**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
258 258  
259 259  
260 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
184 +**Use below commands in CPN01:**
261 261  
186 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
187 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ Set CoAP server address and port
188 +* **AT+URI=0,0,11,2,"mqtt" ** ~/~/Set CoAP resource path
262 262  
263 -(% style="color:blue" %)**Use below commands in NDS03A:**
264 -
265 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
266 -
267 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
268 -
269 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
270 -
271 271  For parameter description, please refer to AT command set
272 272  
273 273  [[image:image-20221021110948-8.png]]
274 274  
275 275  
276 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
195 +After configuring the server address and **reset CPN01** (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
277 277  
278 -[[image:image-20221118103547-9.png||height="605" width="837"]] ​
197 +[[image:image-20221021110956-9.png]] ​
279 279  
280 280  
200 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
281 281  
282 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
283 283  
203 +**AT Commands:**
284 284  
285 -(% style="color:blue" %)**AT Commands:**
205 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
206 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ Set UDP server address and port
207 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
286 286  
287 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
288 -
289 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
290 -
291 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
292 -
293 293  ​ [[image:image-20221021111025-10.png]]
294 294  
295 -
296 296  [[image:image-20221021111033-11.png||height="241" width="576"]]
297 297  
298 298  ​
299 299  
215 +=== **2.2.6 Use MQTT protocol to uplink data** ===
300 300  
301 -=== 2.2.6 Use MQTT protocol to uplink data ===
302 302  
218 +**AT Commands:**
303 303  
304 -(% style="color:blue" %)**AT Commands:**
220 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
221 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
222 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
223 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
224 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
225 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
226 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
305 305  
306 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
228 +​ [[image:image-20221021111058-12.png]]
307 307  
308 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
230 +[[image:image-20221021111201-16.png||height="472" width="653"]]
309 309  
310 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
311 -
312 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
313 -
314 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
315 -
316 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
317 -
318 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
319 -
320 -​ [[image:image-20221118103445-7.png]]
321 -
322 -
323 -[[image:image-20221118103453-8.png||height="608" width="841"]]
324 -
325 325  ​
326 326  
327 327  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
328 328  
329 329  
237 +=== **2.2.7 Use TCP protocol to uplink data** ===
330 330  
331 -=== 2.2.7 Use TCP protocol to uplink data ===
239 +**AT Commands**
332 332  
241 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
242 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ Set TCP server address and port
333 333  
334 -(% style="color:blue" %)**AT Commands:**
335 -
336 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
337 -
338 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
339 -
340 340  ​ [[image:image-20221021111125-14.png]]
341 341  
342 342  [[image:image-20221021111131-15.png]]
... ... @@ -343,99 +343,73 @@
343 343  
344 344  ​
345 345  
250 +=== **2.2.8 Change Update Interval** ===
346 346  
347 -=== 2.2.8 Change Update Interval ===
252 +User can use below command to change the **uplink interval**.
348 348  
254 +* **AT+TDC=7200      ** ~/~/ Set Update Interval to 7200s (2 hours)
349 349  
350 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
256 +**NOTE:**
351 351  
352 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
258 +**~1. By default, the device will send an uplink message every 1 hour.**
353 353  
354 -(% style="color:red" %)**NOTE:**
355 355  
356 -1.  By default, the device will send an uplink message every 4 hour.
261 +== **2.3  Uplink Payload** ==
357 357  
263 +The uplink payload includes 123 bytes in total by default.
358 358  
265 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
359 359  
360 -== 2.3  Uplink Payload ==
267 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**1**|**1**|**3**
268 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[ Calculate Flag>>path:#H2.4.8A0DigitalInterrupt]]|Contact Status|Alarm|Total pulse
361 361  
270 +(% style="width:1201px" %)
271 +|**3**|**4**|**1**|**3**|**1**|**3**|4|**8 group**|(% style="width:1px" %)
272 +|The last open duration|Time stamp|Contact Status|Total pulse|Calculate Flag|The last open duration|Time stamp|...|(% style="width:1px" %)
362 362  
363 -The uplink payload includes 26 bytes in total by default.
274 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
364 364  
365 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
276 +[[image:image-20221021111201-16.png||height="572" width="792"]]
366 366  
367 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
368 -
369 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
370 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
371 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
372 -
373 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
374 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
375 -**1-32 group**
376 -)))
377 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
378 -
379 -
380 -
381 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
382 -
383 -
384 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
385 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
386 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
387 -
388 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
389 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
390 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
391 -
392 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
393 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
394 -**1-32 group**
395 -)))
396 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
397 -
398 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
399 -
400 -[[image:image-20221117145932-2.png]]
401 -
402 -
403 403  The payload is ASCII string, representative same HEX:
404 404  
405 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
280 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
406 406  
407 -**where:**
282 +where:
283 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
408 408  
409 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
285 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
410 410  
411 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
287 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
412 412  
413 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
289 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
414 414  
415 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
291 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
416 416  
417 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
293 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00=0
418 418  
419 -* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
295 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00=0
420 420  
421 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
297 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
422 422  
423 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
299 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
424 424  
425 -* (% style="color:#037691" %)**last open time:  **(%%)0x000017 =23
301 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
426 426  
427 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
303 +*(% style="color:#037691" %)** Time stamp :**(%%) 0x6315537b =1662342011 (Unix Time)
428 428  
305 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 01  00000b  02  000026  63510fed
429 429  
307 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
430 430  
431 -== 2.4  Payload Explanation and Sensor Interface ==
432 432  
433 -=== 2.4.1  Device ID ===
310 +== **2.4  Payload Explanation and Sensor Interface** ==
434 434  
312 +=== **2.4.1  Device ID** ===
435 435  
436 436  By default, the Device ID is equal to the last 15 bits of IMEI.
437 437  
438 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
316 +User can use **AT+DEUI** to set Device ID
439 439  
440 440  **Example:**
441 441  
... ... @@ -444,27 +444,24 @@
444 444  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
445 445  
446 446  
447 -=== 2.4.2  Version Info ===
325 +=== **2.4.2  Version Info** ===
448 448  
449 -
450 450  Specify the software version: 0x64=100, which means firmware version 1.00.
451 451  
452 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
329 +For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
453 453  
454 454  
455 -=== 2.4.3  Battery Info ===
332 +=== **2.4.3  Battery Info** ===
456 456  
334 +Check the battery voltage for CPN01.
457 457  
458 -Check the battery voltage for NDS03A.
459 -
460 460  Ex1: 0x0B45 = 2885mV
461 461  
462 462  Ex2: 0x0B49 = 2889mV
463 463  
464 464  
465 -=== 2.4.4  Signal Strength ===
341 +=== **2.4.4  Signal Strength** ===
466 466  
467 -
468 468  NB-IoT Network signal Strength.
469 469  
470 470  **Ex1: 0x1d = 29**
... ... @@ -480,45 +480,62 @@
480 480  **99**    Not known or not detectable
481 481  
482 482  
483 -=== 2.4.5  Disalarm: (default: 0) ===
358 +=== **2.4.5 Calculate Flag** ===
484 484  
360 +The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
485 485  
486 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
362 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
487 487  
488 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
364 +Default value: 0. 
489 489  
490 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
366 +Range (6 bits): (b)000000 ~~ (b) 111111
491 491  
492 492  
493 -=== 2.4.6  Keep Status & Keep Time ===
369 +=== **2.4.6  Alarm** ===
494 494  
371 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
495 495  
496 -Shows the configure value of Alarm Base on Timeout Feature
497 497  
374 +=== **2.4.7 Contact Status** ===
498 498  
499 -=== 2.4.7  Timestamp ===
376 +0: Open
500 500  
378 +1: Close
501 501  
502 -Timestamp : 0x6315537b =1662342011
503 503  
381 +=== **2.4.8 Total pulse** ===
504 504  
505 -=== 2.4.8  Switch Dual Channel Mode ===
383 +Total pulse/counting based on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
506 506  
385 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
507 507  
508 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
509 509  
388 +=== **2.4.9 The last open duration** ===
510 510  
511 -== 2.5  Downlink Payload ==
390 +Dry Contact last open duration.
512 512  
392 +Unit: min.
513 513  
514 -By default, NDS03A prints the downlink payload to console port.
394 +[[image:image-20221021111346-17.png||height="146" width="770"]]
515 515  
516 -[[image:image-20221021111414-18.png]] ​
517 517  
397 +=== **2.4.10  Timestamp** ===
518 518  
399 +Timestamp : 0x6315537b =1662342011
400 +
401 +Convert Unix timestamp to time 2022-9-5 9:40:11.
402 +
403 +**~ **
404 +
405 +== **2.5  Downlink Payload** ==
406 +
407 +By default, CPN01 prints the downlink payload to console port.
408 +
409 +[[image:image-20221021111414-18.png]] ​
410 +
519 519  **Examples:**
520 520  
521 -* (% style="color:#037691" %)**Set TDC**
413 +* **Set TDC**
522 522  
523 523  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
524 524  
... ... @@ -526,237 +526,172 @@
526 526  
527 527  Payload:    01 00 00 3C    TDC=60S
528 528  
529 -* (% style="color:#037691" %)**Reset**
421 +* **Reset**
530 530  
531 -If payload = 0x04FF, it will reset the NDS03A
423 +If payload = 0x04FF, it will reset the NSE01
532 532  
533 -* (% style="color:#037691" %)**INTMOD**
425 +* **INTMOD**
534 534  
535 535  Downlink Payload: 06000003, Set AT+INTMOD=3
536 536  
429 +== **2.6  ​LED Indicator** ==
537 537  
538 -== 2.6  ​LED Indicator ==
431 +The CPN01 has an internal LED which is to show the status of different states.
539 539  
540 -
541 -The NDS03A has an internal LED which is to show the status of different states.
542 -
543 543  * When the device starts normally, the LED will light up for 1 second.
544 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
434 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
545 545  * For each uplink probe, LED will be on for 500ms.
546 546  
437 +== **2.7  Alarm Base on Timeout** ==
547 547  
439 +CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
548 548  
549 -== 2.7  Alarm Base on Timeout ==
550 550  
442 +**~1. Keep Status: Status to be monitor**
551 551  
552 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
553 -
554 -
555 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
556 -
557 557  Keep Status = 1: Monitor Close to Open event
558 558  
559 559  Keep Status = 0: Monitor Open to Close event
560 560  
561 561  
562 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
449 +**2. Keep Time: Timeout to send an Alarm**
563 563  
564 564  Range 0 ~~ 65535(0xFFFF) seconds.
565 565  
566 566  If keep time = 0, Disable Alarm Base on Timeout feature.
567 567  
568 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
455 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
569 569  
570 570  
571 -(% style="color:blue" %)**AT Command to configure:**
458 +**AT Command** to configure:
572 572  
573 -(% style="color:blue" %)**PB14 PIN:**
460 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
574 574  
575 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
462 +**AT+TTRIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
576 576  
577 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
578 578  
465 +== **2.8 Set debug mode** ==
579 579  
580 -(% style="color:blue" %)**PB15 PIN:**
581 -
582 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
583 -
584 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
585 -
586 -
587 -== 2.8  Set debug mode ==
588 -
589 -
590 590  Feature: Enable or Disable debug mode
591 591  
592 -(% style="color:blue" %)**AT Command: AT+DEBUG**
593 593  
470 +**AT Command: AT+DEBUG**
471 +
594 594  [[image:image-20221021111629-21.png]]
595 595  
474 +== **2.9 Clear Flash Record** ==
596 596  
597 -
598 -== 2.9  Clear Flash Record ==
599 -
600 -
601 601  Feature: Clear flash storage for data log feature.
602 602  
603 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
478 +**AT Command: AT+CLRDTA**
604 604  
605 605  [[image:image-20221021111527-19.png]]
606 606  
482 +== ** 2.10 Set trigger mode** ==
607 607  
484 +➢ AT Command: **AT+TTRMOD**
608 608  
609 -== 2.10  Count Mod ==
486 +Feature: Set the trigger interrupt mode.
610 610  
488 +[[image:image-20221021111552-20.png]]
611 611  
612 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
490 +== **2.11 Set the calculate flag** ==
613 613  
614 -[[image:image-20221118092935-1.png]]
492 +Feature: Set the calculate flag
615 615  
494 +**AT Command: AT+CALCFLAG**
616 616  
496 +[[image:image-20221021111711-22.png]]
617 617  
618 -== 2.11  Interrupt Pin Channel Mod ==
498 +== **2.12 Set count number** ==
619 619  
500 +Feature: Manually set the count number
620 620  
621 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
502 +**AT Command: AT+SETCNT**
622 622  
623 -[[image:image-20221118093144-2.png]]
504 +[[image:image-20221021111748-24.png]]
624 624  
506 +== **2.13 Set the number of data to be uploaded and the recording time** ==
625 625  
508 +➢ AT Command:
626 626  
627 -== 2.12 TTRIG1/2 timeout status alarm ==
510 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
628 628  
629 629  
630 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
513 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
631 631  
632 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
515 +== **2.14 Read or Clear cached data** ==
633 633  
634 -[[image:image-20221118093512-3.png]]
517 +➢ AT Command:
635 635  
519 +AT+CDP    ~/~/ Read cached data
636 636  
521 +[[image:image-20221021111810-25.png||height="364" width="797"]]
637 637  
638 -== 2.13  Select counting mode ==
639 639  
524 +AT+CDP=0    ~/~/ Clear cached data ​
640 640  
641 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
526 +== **2.15  ​Firmware Change Log** ==
642 642  
643 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
528 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
644 644  
645 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
530 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
646 646  
647 -[[image:image-20221118093658-4.png]]
532 +== **2.16  ​Battery Analysis** ==
648 648  
534 +=== **2.16.1  ​Battery Type** ===
649 649  
536 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
650 650  
651 -
652 -== 2.14  Set the number of data to be uploaded and the recording time ==
653 -
654 -
655 -(% style="color:blue" %)**AT Command:**
656 -
657 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
658 -
659 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
660 -
661 -
662 -== 2.15  Read or Clear cached data ==
663 -
664 -
665 -(% style="color:blue" %)**AT Command:**
666 -
667 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
668 -
669 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
670 -
671 -[[image:image-20221118094227-5.png]]
672 -
673 -
674 -
675 -== 2.16  ​Firmware Change Log ==
676 -
677 -
678 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
679 -
680 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
681 -
682 -
683 -
684 -== 2.17  ​Battery Analysis ==
685 -
686 -
687 -=== 2.17.1  ​Battery Type ===
688 -
689 -
690 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
691 -
692 692  The battery is designed to last for several years depends on the actual use environment and update interval. 
693 693  
694 694  The battery-related documents as below:
695 695  
696 696  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
697 -
698 698  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
699 -
700 700  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
701 701  
702 702  [[image:image-20221021111911-26.png]] ​
703 703  
548 +=== **2.16.2  Power consumption Analyze** ===
704 704  
705 -
706 -=== 2.17.2  Power consumption Analyze ===
707 -
708 -
709 709  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
710 710  
711 711  Instruction to use as below:
712 712  
713 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
554 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
714 714  
715 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
556 +**Step 2: ** Open it and choose
716 716  
717 717  * Product Model
718 -
719 719  * Uplink Interval
720 -
721 721  * Working Mode
722 722  
723 723  And the Life expectation in difference case will be shown on the right.
724 724  
725 -[[image:1666596205057-567.png]] ​
564 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
726 726  
566 +=== **2.16.3  ​Battery Note** ===
727 727  
728 -
729 -=== 2.17.3  ​Battery Note ===
730 -
731 -
732 732  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
733 733  
570 +=== **2.16.4  Replace the battery** ===
734 734  
572 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
735 735  
736 -=== 2.17.4  Replace the battery ===
737 737  
575 += **3. ​ Access NB-IoT Module** =
738 738  
739 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
740 -
741 -
742 -
743 -= 3. ​ Access NB-IoT Module =
744 -
745 -
746 746  Users can directly access the AT command set of the NB-IoT module.
747 747  
748 748  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
749 749  
750 -[[image:image-20221118094449-6.png]] ​
581 +[[image:image-20221021112006-28.png]] ​
751 751  
583 += **4.  Using the AT Commands** =
752 752  
585 +== **4.1  Access AT Commands** ==
753 753  
754 -= 4.  Using the AT Commands =
755 -
756 -
757 -== 4.1  Access AT Commands ==
758 -
759 -
760 760  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
761 761  
762 762  AT+<CMD>?  : Help on <CMD>
... ... @@ -767,9 +767,8 @@
767 767  
768 768  AT+<CMD>=?  : Get the value
769 769  
597 +**General Commands**      
770 770  
771 -(% style="color:blue" %)**General Commands**      
772 -
773 773  AT  : Attention       
774 774  
775 775  AT?  : Short Help     
... ... @@ -792,41 +792,35 @@
792 792  
793 793  AT+SERVADDR  : Server Address
794 794  
795 -AT+TR      :  Get or Set record time
621 +AT+TR      : Get or Set record time"
796 796  
623 +
797 797  AT+NOUD      : Get or Set the number of data to be uploaded
798 798  
799 -AT+CDP     :  Read or Clear cached data
800 800  
801 -AT+ DEBUG   : Enable or Disable debug mode
627 +AT+CDP     : Read or Clear cached data
802 802  
803 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
804 804  
805 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
630 +AT+ DEBUG   : Enable or Disable debug mode
806 806  
807 -AT+COUNTMOD  :  Get or Set the count mode
632 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
808 808  
809 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
634 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
810 810  
811 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
636 +AT+ CALCFLAG   : Get or Set the calculate flag
812 812  
813 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
638 +AT+ CLRC   : Clear current door open count
814 814  
815 -AT+ CLRC   :  Clear current door open count
640 +**COAP Management**      
816 816  
817 -
818 -(% style="color:blue" %)**COAP Management**      
819 -
820 820  AT+URI            : Resource parameters
821 821  
644 +**UDP Management**
822 822  
823 -(% style="color:blue" %)**UDP Management**
824 -
825 825  AT+CFM          : Upload confirmation mode (only valid for UDP)
826 826  
648 +**MQTT Management**
827 827  
828 -(% style="color:blue" %)**MQTT Management**
829 -
830 830  AT+CLIENT               : Get or Set MQTT client
831 831  
832 832  AT+UNAME  : Get or Set MQTT Username
... ... @@ -837,65 +837,86 @@
837 837  
838 838  AT+SUBTOPIC  : Get or Set MQTT subscription topic
839 839  
660 +**Information**          
840 840  
841 -(% style="color:blue" %)**Information**          
842 -
843 843  AT+FDR  : Factory Data Reset
844 844  
845 845  AT+PWORD  : Serial Access Password
846 846  
666 += **​5.  FAQ** =
847 847  
668 +== **5.1 ​ How to Upgrade Firmware** ==
848 848  
849 -= ​5.  FAQ =
670 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
850 850  
672 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
851 851  
852 -== 5.1 ​ How to Upgrade Firmware ==
674 +**Notice, **CPN01 **and **CPL01 **share the same mother board. They use the same connection and method to update.**
853 853  
854 854  
855 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
677 += **6.  Trouble Shooting** =
856 856  
857 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
679 +== **6.1  ​Connection problem when uploading firmware** ==
858 858  
859 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
681 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
860 860  
861 861  
684 +== **6.2  AT Command input doesn't work** ==
862 862  
863 -= 6.  Trouble Shooting =
686 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
864 864  
865 865  
866 -== 6.1  ​Connection problem when uploading firmware ==
689 += **7. ​ Order Info** =
867 867  
691 +Part Number**:** CPN01
868 868  
869 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
870 870  
694 += **8.  Packing Info** =
871 871  
696 +**Package Includes**:
872 872  
873 -== 6.2  AT Command input doesn't work ==
698 +* CPN01 Open/Close Sensor x 1
699 +* External antenna x 1
874 874  
701 +**Dimension and weight**:
875 875  
876 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
703 +* Size: 195 x 125 x 55 mm
704 +* Weight:   420g
877 877  
706 += **9.  Support** =
878 878  
708 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
709 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
879 879  
880 -= 7. ​ Order Info =
711 +​
881 881  
882 882  
883 -Part Number**:** NDS03A
884 884  
885 885  
886 886  
887 -= 8.  Packing Info =
888 888  
889 889  
890 -(% style="color:blue" %)**Package Includes**:
891 891  
892 -* NDS03A Open/Close Door Sensor x 1
893 893  
894 -= 9.  Support =
895 895  
896 896  
897 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
898 898  
899 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
900 900  
901 -​
725 +
726 +
727 +
728 +
729 +
730 +
731 +
732 +
733 +
734 +
735 +
736 +
737 +
738 +
739 +
740 +
741 +
742 +
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0