Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 70.2 >
edited by Xiaoling
on 2022/11/18 10:39
To version < 27.1 >
edited by David Huang
on 2022/10/21 11:18
>
Change comment: Uploaded new attachment "image-20221021111810-25.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,69 +1,36 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png"]]
3 3  
4 4  
5 +**~1. Introduction**
5 5  
7 +**1.1 ​**What is CPN01 **NB-IOT** Pulse/Contact Sensor
6 6  
9 +The Dragino CPL01 is a **NB-IOT Contact Sensor**. It detects open/close status and uplink to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
7 7  
11 +The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
8 8  
13 +CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open for a certain time.
9 9  
10 -**Table of Contents：**
15 +CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
11 11  
12 -{{toc/}}
17 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
18 +\\CPN01 supports different uplink methods include **TCP,MQTT,UDP and CoAP  **for different application requirement.
19 +\\CPN01 is powered by  **8500mAh Li-SOCI2 battery**, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
20 +\\To use CPN01, user needs to check if there is NB-IoT coverage in local area and with the bands CPN01 supports. If the local operate support it, user needs to get a **NB-IoT SIM card** from local operator and install CPN01 to get NB-IoT network connection
13 13  
22 +​
14 14  
15 15  
25 +**​1.2 Features**
16 16  
17 -
18 -= 1.  Introduction =
19 -
20 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
21 -
22 -
23 -(((
24 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
25 -)))
26 -
27 -(((
28 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
29 -)))
30 -
31 -(((
32 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
33 -)))
34 -
35 -(((
36 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -)))
38 -
39 -(((
40 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
41 -)))
42 -
43 -(((
44 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
45 -)))
46 -
47 -(((
48 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
49 -)))
50 -
51 -(((
52 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
53 -)))
54 -
55 -
56 -
57 -== ​1.2  Features ==
58 -
59 -
60 60  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
61 61  * Open/Close detect
62 62  * Open/Close statistics
63 63  * Monitor Battery Level
64 -* connect two door sensors
31 +* Uplink on periodically and open/close event
65 65  * Datalog feature
66 -* Uplink periodically
33 +* Uplink on periodically
67 67  * Downlink to change configure
68 68  * Wall Mountable
69 69  * Outdoor Use
... ... @@ -70,45 +70,16 @@
70 70  * Ultra-Low Power consumption
71 71  * AT Commands to change parameters
72 72  * Micro SIM card slot for NB-IoT SIM
73 -* 8500mAh Battery for long-term use
40 +* 8500mAh Battery for long term use
74 74  
42 +**1.3  Specification**
75 75  
44 +**Common DC Characteristics:**
76 76  
77 -== 1.3  Storage & Operation ==
78 -
79 -
80 -Temperature -40°C to +85°C
81 -
82 -
83 -== 1.4  Mechanical ==
84 -
85 -
86 -[[image:image-20221117114937-4.png]]
87 -
88 -
89 -[[image:image-20221117114949-5.png]]
90 -
91 -
92 -[[image:image-20221117115010-6.png]]
93 -
94 -
95 -
96 -== 1.5 ​ Applications ==
97 -
98 -
99 -[[image:image-20221117114842-3.png]]
100 -
101 -
102 -
103 -== 1.6  Specification ==
104 -
105 -
106 -(% style="color:blue" %)**Common DC Characteristics:**
107 -
108 108  * Supply Voltage: 2.1v ~~ 3.6v
109 109  * Operating Temperature: -40 ~~ 85°C
110 110  
111 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
112 112  
113 113  * - B1 @H-FDD: 2100MHz
114 114  * - B3 @H-FDD: 1800MHz
... ... @@ -117,22 +117,31 @@
117 117  * - B20 @H-FDD: 800MHz
118 118  * - B28 @H-FDD: 700MHz
119 119  
58 +**1.4 Installation**
120 120  
60 +Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
121 121  
122 -== 1.7  Pin Definitions and Switch ==
62 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png]] [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image002.png]] ​
123 123  
64 +**1.5 ​Applications**
124 124  
125 -[[image:image-20221021110429-4.png]]
66 +* Open/Close Detection
67 +* Pulse meter application
68 +* Dry Contact Detection
126 126  
70 +**1.6 Mechanical**
127 127  
128 -=== 1.7.1  Pin Definition ===
72 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image003.png]]
129 129  
74 +**~ 1.7 Pin Definitions and Switch**
130 130  
131 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
76 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image004.png]]
132 132  
78 +**1.7.1 Pin Definition**
133 133  
80 +CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
134 134  
135 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
82 +**1.7.2 Jumper JP2(Power ON/OFF)**
136 136  
137 137  
138 138  Power on Device when putting this jumper.
... ... @@ -139,16 +139,16 @@
139 139  
140 140  
141 141  
142 -=== 1.7.3  BOOT MODE / SW1 ===
89 +**1.7.3 BOOT MODE / SW1**
143 143  
144 144  
145 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
92 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
146 146  
147 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
94 +2) Flash: work mode, the device starts to work and send out console output for further debug
148 148  
149 149  
150 150  
151 -=== 1.7.4  Reset Button ===
98 +**1.7.4 Reset Button**
152 152  
153 153  
154 154  Press to reboot the device.
... ... @@ -155,316 +155,214 @@
155 155  
156 156  
157 157  
158 -=== 1.7.5  LED ===
105 +**1.7.5 LED**
159 159  
160 160  
161 -The LED will blink when :
108 +It will flash:
162 162  
163 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
164 164  
165 -2.  Send an uplink packet
166 166  
114 +**2.  Use CPN01 to communicate with IoT Server**
167 167  
116 +**2.1  How it works**
168 168  
169 -== 1.8  Magnet Distance ==
118 +The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
170 170  
120 +The diagram below shows the working flow in default firmware of CPN01:
171 171  
172 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
122 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image005.png||alt="说明: image-20220708101605-2.png"]]
173 173  
174 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
124 +**2.2 ​ Configure the CPN01**
175 175  
126 +**2.2.1 Test Requirement**
176 176  
128 +To use CPN01 in your city, make sure meet below requirements:
177 177  
178 -= 2.  Use NDS03A to communicate with IoT Server =
179 -
180 -== 2.1  How it works ==
181 -
182 -
183 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
184 -
185 -The diagram below shows the working flow in the default firmware of NDS03A:
186 -
187 -[[image:image-20221021110615-5.png]]
188 -
189 -
190 -
191 -== 2.2 ​ Configure NDS03A ==
192 -
193 -=== 2.2.1 Test Requirement ===
194 -
195 -
196 -To use NDS03A in your city, make sure to meet below requirements:
197 -
198 -* Your local operator has already distributed an NB-IoT Network.
199 -* The local NB-IoT network used the band that NDS03A supports.
130 +* Your local operator has already distributed a NB-IoT Network there.
131 +* The local NB-IoT network used the band that CPN01 supports.
200 200  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
201 201  
202 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
203 203  
204 -[[image:image-20221117142300-1.png]]
205 -
206 206   ​
207 207  
138 +**2.2.2 Insert SIM card**
208 208  
209 -=== 2.2.2 Insert NB-IoT SIM card ===
210 -
211 -
212 212  Insert the NB-IoT Card get from your provider.
213 213  
214 -User needs to take out the NB-IoT module and insert the SIM card like below:
142 +User need to take out the NB-IoT module and insert the SIM card like below:
215 215  
216 -[[image:image-20221021110745-6.png]] ​
144 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image006.png||alt="说明: 1657249468462-536.png"]] ​
217 217  
146 +**2.2.3 Connect USB – TTL to CPN01 to configure it**
218 218  
148 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
219 219  
220 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
150 +**Connection:**
221 221  
152 + USB TTL GND <~-~-~-~-> GND
222 222  
223 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
154 + USB TTL TXD <~-~-~-~-> UART_RXD
224 224  
225 -(% style="color:blue" %)**Connection:**
156 + USB TTL RXD <~-~-~-~-> UART_TXD
226 226  
227 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
228 -
229 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
230 -
231 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
232 -
233 -
234 234  In the PC, use below serial tool settings:
235 235  
236 -* Baud:  (% style="color:red" %)**9600**
160 +* Baud:  **9600**
161 +* Data bits:** 8**
162 +* Stop bits: **1**
163 +* Parity:  **None**
164 +* Flow Control: **None**
237 237  
238 -* Data bits:** (% style="color:red" %)8(%%)**
166 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
239 239  
240 -* Stop bits: (% style="color:red" %)**1**
168 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image007.png]]
241 241  
242 -* Parity:  (% style="color:red" %)**None**
170 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
243 243  
244 -* Flow Control: (% style="color:red" %)**None**
172 +**2.2.4 Use CoAP protocol to uplink data**
245 245  
246 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
174 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
247 247  
248 -​[[image:image-20221021110817-7.png]]
176 +**Use below commands:**
249 249  
250 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
178 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
179 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
180 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
251 251  
252 -
253 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
254 -
255 -
256 -
257 -=== 2.2.4 Use CoAP protocol to uplink data ===
258 -
259 -
260 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
261 -
262 -
263 -(% style="color:blue" %)**Use below commands in NDS03A:**
264 -
265 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
266 -
267 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
268 -
269 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
270 -
271 271  For parameter description, please refer to AT command set
272 272  
273 -[[image:image-20221021110948-8.png]]
184 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image008.png]]
274 274  
186 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
275 275  
276 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
188 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image009.png]] ​
277 277  
278 -[[image:image-20221118103547-9.png||height="605" width="837"]] ​
190 +**2.2.5 Use UDP protocol to uplink data(Default protocol)**
279 279  
192 +This feature is supported since firmware version v1.0.1
280 280  
194 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
195 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
196 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
281 281  
282 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
198 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image010.png]]
283 283  
200 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image011.png||alt="说明: 1657249930215-289.png"]]
284 284  
285 -(% style="color:blue" %)**AT Commands:**
286 -
287 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
288 -
289 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
290 -
291 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
292 -
293 -​ [[image:image-20221021111025-10.png]]
294 -
295 -
296 -[[image:image-20221021111033-11.png||height="241" width="576"]]
297 -
298 298  ​
299 299  
204 +**2.2.6 Use MQTT protocol to uplink data**
300 300  
301 -=== 2.2.6 Use MQTT protocol to uplink data ===
206 +This feature is supported since firmware version v110
302 302  
208 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
209 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
210 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
211 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
212 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
213 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
214 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
303 303  
304 -(% style="color:blue" %)**AT Commands:**
216 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image012.png]]
305 305  
306 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
218 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image013.png]]
307 307  
308 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
309 -
310 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
311 -
312 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
313 -
314 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
315 -
316 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
317 -
318 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
319 -
320 -​ [[image:image-20221118103445-7.png]]
321 -
322 -
323 -[[image:image-20221118103453-8.png||height="608" width="841"]]
324 -
325 325  ​
326 326  
327 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
222 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
328 328  
224 +**2.2.7 Use TCP protocol to uplink data**
329 329  
226 +This feature is supported since firmware version v110
330 330  
331 -=== 2.2.7 Use TCP protocol to uplink data ===
228 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
229 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
332 332  
231 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image014.png]]
333 333  
334 -(% style="color:blue" %)**AT Commands:**
233 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image015.png||alt="说明: 1657250255956-604.png"]]
335 335  
336 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
337 -
338 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
339 -
340 -​ [[image:image-20221021111125-14.png]]
341 -
342 -[[image:image-20221021111131-15.png]]
343 -
344 344  ​
345 345  
237 +**2.2.8 Change Update Interval**
346 346  
347 -=== 2.2.8 Change Update Interval ===
239 +User can use below command to change the **uplink interval**.
348 348  
241 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
349 349  
350 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
243 +**NOTE:**
351 351  
352 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
245 +**~1. By default, the device will send an uplink message every 1 hour.**
353 353  
354 -(% style="color:red" %)**NOTE:**
247 +**2.3  Uplink Payload**
355 355  
356 -1.  By default, the device will send an uplink message every 4 hour.
249 +In this mode, uplink payload includes 87 bytes in total by default.
357 357  
251 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
358 358  
253 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
254 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
359 359  
360 -== 2.3  Uplink Payload ==
361 361  
257 +|2|2|4|8 group
258 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
362 362  
363 -The uplink payload includes 26 bytes in total by default.
260 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
364 364  
365 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
262 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image016.png]]
366 366  
367 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
368 -
369 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
370 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
371 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
372 -
373 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
374 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
375 -**1-32 group**
376 -)))
377 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
378 -
379 -
380 -
381 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
382 -
383 -
384 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
385 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
386 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
387 -
388 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
389 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
390 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
391 -
392 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
393 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
394 -**1-32 group**
395 -)))
396 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
397 -
398 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
399 -
400 -[[image:image-20221117145932-2.png]]
401 -
402 -
403 403  The payload is ASCII string, representative same HEX:
404 404  
405 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
266 +0xf86778705021331700640c7817010001000000090000026315537b 0100000b02000002663510fed0100000e0200000263510f39010000000000000063510e85010000000000000063510d2e010000000000000063510c7a010000000000000063510bc6010000000000000063510954010000000000000063510882 where:
406 406  
407 -**where:**
268 +* **Device ID: 0x f867787050213317 = f867787050213317**
269 +* **Version: 0x0064=100=1.0.0**
408 408  
409 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
271 +* **BAT: 0x0c78 = 3192 mV = 3.192V**
272 +* **Singal: 0x17 = 23**
273 +* **Mod: 0x01 = 1**
274 +* **Calculate Flag: 0x00= 0**
275 +* **Contact Status: 0x00= 0**
276 +* **Alarm:0x00 =0**
277 +* **Total pulse:0x09 =0**
278 +* **The last open duration:0x02 =2**
279 +* **Time stamp : 0x6315537b =1662342011**
280 +* **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000b0200002663510fed**
281 +* **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000e0200002663510f39,.......**
410 410  
411 -* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
283 +**2.4  Payload Explanation and Sensor Interface**
412 412  
413 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
285 +**2.4.1  Device ID**
414 414  
415 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
287 +By default, the Device ID equal to the last 15 bits of IMEI.
416 416  
417 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
289 +User can use **AT+DEUI** to set Device ID
418 418  
419 -* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
420 -
421 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
422 -
423 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
424 -
425 -* (% style="color:#037691" %)**last open time:  **(%%)0x000017 =23
426 -
427 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
428 -
429 -
430 -
431 -== 2.4  Payload Explanation and Sensor Interface ==
432 -
433 -=== 2.4.1  Device ID ===
434 -
435 -
436 -By default, the Device ID is equal to the last 15 bits of IMEI.
437 -
438 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
439 -
440 440  **Example:**
441 441  
442 442  AT+DEUI=868411056754138
443 443  
444 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
295 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
445 445  
297 +**2.4.2  Version Info**
446 446  
447 -=== 2.4.2  Version Info ===
299 +Specify the software version: 0x64=100, means firmware version 1.00.
448 448  
301 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
449 449  
450 -Specify the software version: 0x64=100, which means firmware version 1.00.
303 +**2.4.3  Battery Info**
451 451  
452 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
305 +Check the battery voltage for CPN01.
453 453  
454 -
455 -=== 2.4.3  Battery Info ===
456 -
457 -
458 -Check the battery voltage for NDS03A.
459 -
460 460  Ex1: 0x0B45 = 2885mV
461 461  
462 462  Ex2: 0x0B49 = 2889mV
463 463  
311 +**2.4.4  Signal Strength**
464 464  
465 -=== 2.4.4  Signal Strength ===
466 -
467 -
468 468  NB-IoT Network signal Strength.
469 469  
470 470  **Ex1: 0x1d = 29**
... ... @@ -479,46 +479,58 @@
479 479  
480 480  **99**    Not known or not detectable
481 481  
327 +**2.4.5 Calculate Flag**
482 482  
483 -=== 2.4.5  Disalarm: (default: 0) ===
329 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
484 484  
331 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
485 485  
486 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
333 +Default value: 0. 
487 487  
488 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
335 +Range (6 bits): (b)000000 ~~ (b) 111111
489 489  
490 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
337 +**2.4.6  Alarm**
491 491  
339 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
492 492  
493 -=== 2.4.6  Keep Status & Keep Time ===
341 +**2.4.7 Contact Status**
494 494  
343 +0: Open
495 495  
496 -Shows the configure value of Alarm Base on Timeout Feature
345 +1: Close
497 497  
347 +**2.4.8 Total pulse**
498 498  
499 -=== 2.4.7  Timestamp ===
349 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
500 500  
351 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
501 501  
502 -Timestamp : 0x6315537b =1662342011
353 +**2.4.9 The last open duration**
503 503  
355 +Dry Contact last open duration.
504 504  
505 -=== 2.4.8  Switch Dual Channel Mode ===
357 +Unit: min.
506 506  
359 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image017.png]]
507 507  
508 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
509 509  
362 +**2.4.10  Timestamp**
510 510  
511 -== 2.5  Downlink Payload ==
364 +Time stamp : 0x6315537b =1662342011
512 512  
366 +Convert Unix timestamp to time 2022-9-5 9:40:11.
513 513  
514 -By default, NDS03A prints the downlink payload to console port.
368 +**~ **
515 515  
516 -[[image:image-20221021111414-18.png]] ​
370 +**2.5  Downlink Payload**
517 517  
372 +By default, CPN01 prints the downlink payload to console port.
518 518  
374 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image018.png||alt="说明: image-20220708133731-5.png"]] ​
375 +
519 519  **Examples:**
520 520  
521 -* (% style="color:#037691" %)**Set TDC**
378 +* **Set TDC**
522 522  
523 523  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
524 524  
... ... @@ -526,237 +526,178 @@
526 526  
527 527  Payload:    01 00 00 3C    TDC=60S
528 528  
529 -* (% style="color:#037691" %)**Reset**
386 +* **Reset**
530 530  
531 -If payload = 0x04FF, it will reset the NDS03A
388 +If payload = 0x04FF, it will reset the NSE01
532 532  
533 -* (% style="color:#037691" %)**INTMOD**
390 +* **INTMOD**
534 534  
535 535  Downlink Payload: 06000003, Set AT+INTMOD=3
536 536  
394 +**2.6  ​LED Indicator**
537 537  
538 -== 2.6  ​LED Indicator ==
396 +The CPN01 has an internal LED which is to show the status of different state.
539 539  
540 -
541 -The NDS03A has an internal LED which is to show the status of different states.
542 -
543 -* When the device starts normally, the LED will light up for 1 second.
544 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
398 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
399 +* Then the LED will be on for 1 second means device is boot normally.
400 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
545 545  * For each uplink probe, LED will be on for 500ms.
546 546  
403 +**2.7 ** Alarm Base on Timeout
547 547  
405 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
548 548  
549 -== 2.7  Alarm Base on Timeout ==
550 550  
408 +**~1. Keep Status: Status to be monitor**
551 551  
552 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
553 -
554 -
555 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
556 -
557 557  Keep Status = 1: Monitor Close to Open event
558 558  
559 559  Keep Status = 0: Monitor Open to Close event
560 560  
561 561  
562 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
415 +**2. Keep Time: Timeout to send an Alarm**
563 563  
564 564  Range 0 ~~ 65535(0xFFFF) seconds.
565 565  
566 566  If keep time = 0, Disable Alarm Base on Timeout feature.
567 567  
568 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
421 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
569 569  
570 570  
571 -(% style="color:blue" %)**AT Command to configure:**
424 +**AT Command** to configure:
572 572  
573 -(% style="color:blue" %)**PB14 PIN:**
426 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
574 574  
575 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
428 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
576 576  
577 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
430 +**2.8** Set debug mode
578 578  
579 -
580 -(% style="color:blue" %)**PB15 PIN:**
581 -
582 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
583 -
584 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
585 -
586 -
587 -== 2.8  Set debug mode ==
588 -
589 -
590 590  Feature: Enable or Disable debug mode
591 591  
592 -(% style="color:blue" %)**AT Command: AT+DEBUG**
593 593  
594 -[[image:image-20221021111629-21.png]]
435 +**AT Command: AT+DEBUG**
595 595  
437 +|**Command Example**|**Function**|**Response**
438 +|AT+DEBUG =0|Disable debug mode to 0|OK
439 +|AT+ DEBUG =1|Enable debug mode to 1|OK
596 596  
441 +== 2.9 Clear Flash Record ==
597 597  
598 -== 2.9  Clear Flash Record ==
599 -
600 -
601 601  Feature: Clear flash storage for data log feature.
602 602  
603 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
445 +**AT Command: AT+CLRDTA**
604 604  
605 -[[image:image-20221021111527-19.png]]
447 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image019.png||alt="说明: image-20220609151132-7.png"]]
606 606  
449 +**~ 2.10 **Set trigger mode
607 607  
451 +➢ AT Command: **AT+TTRMOD**
608 608  
609 -== 2.10  Count Mod ==
453 +Feature: Set the trigger interrupt mode.
610 610  
455 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image020.png||alt="说明: image-20220609151344-9.png"]]
611 611  
612 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
457 +**2.11** Set the calculate flag
613 613  
614 -[[image:image-20221118092935-1.png]]
459 +Feature: Set the calculate flag
615 615  
461 +**AT Command: AT+CALCFLAG**
616 616  
463 +|**Command Example**|**Function**|**Response**
464 +|AT+CALCFLAG =1|Set the calculate flag to 1.|OK
465 +|AT+CALCFLAG =2|Set the calculate flag to 2.|OK
617 617  
618 -== 2.11  Interrupt Pin Channel Mod ==
467 +**2.12** Set count number
619 619  
469 +Feature: Manually set the count number
620 620  
621 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
471 +**AT Command: AT+SETCNT**
622 622  
623 -[[image:image-20221118093144-2.png]]
473 +|**Command Example**|**Function**|**Response**
474 +|AT+ SETCNT =0|Set the count number to 0.|OK
475 +|AT+ SETCNT =100|Set the count number to 100.|OK
624 624  
625 625  
478 +**2.13 Set the number of data to be uploaded and the recording time**
626 626  
627 -== 2.12 TTRIG1/2 timeout status alarm ==
480 +➢ AT Command:
628 628  
482 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
629 629  
630 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
631 631  
632 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
485 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
633 633  
634 -[[image:image-20221118093512-3.png]]
487 +**2.14 Read or Clear cached data**
635 635  
489 +➢ AT Command:
636 636  
491 +AT+CDP    ~/~/ Read cached data
637 637  
638 -== 2.13  Select counting mode ==
493 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image021.png]]
639 639  
640 640  
641 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
496 +AT+CDP=0    ~/~/ Clear cached data ​
642 642  
643 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
498 +**2.15  ​Firmware Change Log**
644 644  
645 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
500 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
646 646  
647 -[[image:image-20221118093658-4.png]]
502 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
648 648  
504 +**2.16  ​Battery Analysis**
649 649  
506 +**2.16.1  ​Battery Type**
650 650  
508 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
651 651  
652 -== 2.14  Set the number of data to be uploaded and the recording time ==
510 +The battery is designed to last for several years depends on the actually use environment and update interval. 
653 653  
512 +The battery related documents as below:
654 654  
655 -(% style="color:blue" %)**AT Command:**
656 -
657 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
658 -
659 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
660 -
661 -
662 -== 2.15  Read or Clear cached data ==
663 -
664 -
665 -(% style="color:blue" %)**AT Command:**
666 -
667 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
668 -
669 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
670 -
671 -[[image:image-20221118094227-5.png]]
672 -
673 -
674 -
675 -== 2.16  ​Firmware Change Log ==
676 -
677 -
678 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
679 -
680 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
681 -
682 -
683 -
684 -== 2.17  ​Battery Analysis ==
685 -
686 -
687 -=== 2.17.1  ​Battery Type ===
688 -
689 -
690 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
691 -
692 -The battery is designed to last for several years depends on the actual use environment and update interval. 
693 -
694 -The battery-related documents as below:
695 -
696 696  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
697 -
698 698  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
699 -
700 700  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
701 701  
702 -[[image:image-20221021111911-26.png]] ​
518 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image022.png||alt="说明: image-20220708140453-6.png"]] ​
703 703  
520 +**2.16.2  Power consumption Analyze**
704 704  
705 -
706 -=== 2.17.2  Power consumption Analyze ===
707 -
708 -
709 709  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
710 710  
711 711  Instruction to use as below:
712 712  
713 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
526 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
714 714  
715 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
528 +**Step 2: ** Open it and choose
716 716  
717 717  * Product Model
718 -
719 719  * Uplink Interval
720 -
721 721  * Working Mode
722 722  
723 723  And the Life expectation in difference case will be shown on the right.
724 724  
725 -[[image:1666596205057-567.png]] ​
536 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image023.jpg||alt="说明: image-20220708141352-7.jpeg"]] ​
726 726  
538 +**2.16.3  ​Battery Note**
727 727  
728 -
729 -=== 2.17.3  ​Battery Note ===
730 -
731 -
732 732  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
733 733  
542 +**2.16.4  Replace the battery**
734 734  
544 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
735 735  
736 -=== 2.17.4  Replace the battery ===
546 +**3. ​ Access NB-IoT Module**
737 737  
738 -
739 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
740 -
741 -
742 -
743 -= 3. ​ Access NB-IoT Module =
744 -
745 -
746 746  Users can directly access the AT command set of the NB-IoT module.
747 747  
748 748  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
749 749  
750 -[[image:image-20221118094449-6.png]] ​
552 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image024.png||alt="说明: 1657261278785-153.png"]] ​
751 751  
554 +**4.  Using the AT Commands**
752 752  
556 +**4.1  Access AT Commands**
753 753  
754 -= 4.  Using the AT Commands =
755 -
756 -
757 -== 4.1  Access AT Commands ==
758 -
759 -
760 760  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
761 761  
762 762  AT+<CMD>?  : Help on <CMD>
... ... @@ -767,9 +767,8 @@
767 767  
768 768  AT+<CMD>=?  : Get the value
769 769  
568 +**General Commands**      
770 770  
771 -(% style="color:blue" %)**General Commands**      
772 -
773 773  AT  : Attention       
774 774  
775 775  AT?  : Short Help     
... ... @@ -792,41 +792,35 @@
792 792  
793 793  AT+SERVADDR  : Server Address
794 794  
795 -AT+TR      :  Get or Set record time
592 +AT+TR      : Get or Set record time"
796 796  
594 +
797 797  AT+NOUD      : Get or Set the number of data to be uploaded
798 798  
799 -AT+CDP     :  Read or Clear cached data
800 800  
801 -AT+ DEBUG   : Enable or Disable debug mode
598 +AT+CDP     : Read or Clear cached data
802 802  
803 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
804 804  
805 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
601 +AT+ DEBUG   : Enable or Disable debug mode
806 806  
807 -AT+COUNTMOD  :  Get or Set the count mode
603 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
808 808  
809 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
605 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
810 810  
811 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
607 +AT+ CALCFLAG   : Get or Set the calculate flag
812 812  
813 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
609 +AT+ CLRC   : Clear current door open count
814 814  
815 -AT+ CLRC   :  Clear current door open count
611 +**COAP Management**      
816 816  
817 -
818 -(% style="color:blue" %)**COAP Management**      
819 -
820 820  AT+URI            : Resource parameters
821 821  
615 +**UDP Management**
822 822  
823 -(% style="color:blue" %)**UDP Management**
824 -
825 825  AT+CFM          : Upload confirmation mode (only valid for UDP)
826 826  
619 +**MQTT Management**
827 827  
828 -(% style="color:blue" %)**MQTT Management**
829 -
830 830  AT+CLIENT               : Get or Set MQTT client
831 831  
832 832  AT+UNAME  : Get or Set MQTT Username
... ... @@ -837,65 +837,86 @@
837 837  
838 838  AT+SUBTOPIC  : Get or Set MQTT subscription topic
839 839  
631 +**Information**          
840 840  
841 -(% style="color:blue" %)**Information**          
842 -
843 843  AT+FDR  : Factory Data Reset
844 844  
845 845  AT+PWORD  : Serial Access Password
846 846  
637 +**​5.  FAQ**
847 847  
639 +**5.1 ​ How to Upgrade Firmware**
848 848  
849 -= ​5.  FAQ =
641 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
850 850  
643 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
851 851  
852 -== 5.1 ​ How to Upgrade Firmware ==
645 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
853 853  
647 +**5.2  Can I calibrate CPN01 to different soil types?**
854 854  
855 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
649 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
856 856  
857 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
651 +**6.  Trouble Shooting**
858 858  
859 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
653 +**6.1  ​Connection problem when uploading firmware**
860 860  
655 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
861 861  
657 +**6.2  AT Command input doesn't work**
862 862  
863 -= 6.  Trouble Shooting =
659 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
864 864  
661 +**7. ​ Order Info**
865 865  
866 -== 6.1  ​Connection problem when uploading firmware ==
663 +Part Number**:** CPN01
867 867  
665 +**8.  Packing Info**
868 868  
869 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
667 +**Package Includes**:
870 870  
669 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
670 +* External antenna x 1
871 871  
672 +**Dimension and weight**:
872 872  
873 -== 6.2  AT Command input doesn't work ==
674 +* Size: 195 x 125 x 55 mm
675 +* Weight:   420g
874 874  
677 +**9.  Support**
875 875  
876 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
679 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
680 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
877 877  
682 +​
878 878  
879 879  
880 -= 7. ​ Order Info =
881 881  
882 882  
883 -Part Number**:** NDS03A
884 884  
885 885  
886 886  
887 -= 8.  Packing Info =
888 888  
889 889  
890 -(% style="color:blue" %)**Package Includes**:
891 891  
892 -* NDS03A Open/Close Door Sensor x 1
893 893  
894 -= 9.  Support =
895 895  
896 896  
897 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
898 898  
899 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
900 900  
901 -​
698 +
699 +
700 +
701 +
702 +
703 +
704 +
705 +
706 +
707 +
708 +
709 +
710 +
711 +
712 +
713 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221021111911-26.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.7 KB
Content
image-20221021111923-27.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -130.6 KB
Content
image-20221021112006-28.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0