Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 68.1 >
edited by Xiaoling
on 2022/11/18 10:34
To version < 30.1 >
edited by David Huang
on 2022/10/21 11:20
>
Change comment: Uploaded new attachment "image-20221021112006-28.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,69 +1,36 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png"]]
3 3  
4 4  
5 +**~1. Introduction**
5 5  
7 +**1.1 ​**What is CPN01 **NB-IOT** Pulse/Contact Sensor
6 6  
9 +The Dragino CPL01 is a **NB-IOT Contact Sensor**. It detects open/close status and uplink to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
7 7  
11 +The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
8 8  
13 +CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open for a certain time.
9 9  
10 -**Table of Contents：**
15 +CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
11 11  
12 -{{toc/}}
17 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
18 +\\CPN01 supports different uplink methods include **TCP,MQTT,UDP and CoAP  **for different application requirement.
19 +\\CPN01 is powered by  **8500mAh Li-SOCI2 battery**, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
20 +\\To use CPN01, user needs to check if there is NB-IoT coverage in local area and with the bands CPN01 supports. If the local operate support it, user needs to get a **NB-IoT SIM card** from local operator and install CPN01 to get NB-IoT network connection
13 13  
22 +​
14 14  
15 15  
25 +**​1.2 Features**
16 16  
17 -
18 -= 1.  Introduction =
19 -
20 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
21 -
22 -
23 -(((
24 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
25 -)))
26 -
27 -(((
28 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
29 -)))
30 -
31 -(((
32 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
33 -)))
34 -
35 -(((
36 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 -)))
38 -
39 -(((
40 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
41 -)))
42 -
43 -(((
44 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
45 -)))
46 -
47 -(((
48 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
49 -)))
50 -
51 -(((
52 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
53 -)))
54 -
55 -
56 -
57 -== ​1.2  Features ==
58 -
59 -
60 60  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
61 61  * Open/Close detect
62 62  * Open/Close statistics
63 63  * Monitor Battery Level
64 -* connect two door sensors
31 +* Uplink on periodically and open/close event
65 65  * Datalog feature
66 -* Uplink periodically
33 +* Uplink on periodically
67 67  * Downlink to change configure
68 68  * Wall Mountable
69 69  * Outdoor Use
... ... @@ -70,43 +70,16 @@
70 70  * Ultra-Low Power consumption
71 71  * AT Commands to change parameters
72 72  * Micro SIM card slot for NB-IoT SIM
73 -* 8500mAh Battery for long-term use
40 +* 8500mAh Battery for long term use
74 74  
75 -== 1.3  Storage & Operation ==
42 +**1.3  Specification**
76 76  
44 +**Common DC Characteristics:**
77 77  
78 -Temperature -40°C to +85°C
79 -
80 -
81 -== 1.4  Mechanical ==
82 -
83 -
84 -[[image:image-20221117114937-4.png]]
85 -
86 -
87 -[[image:image-20221117114949-5.png]]
88 -
89 -
90 -[[image:image-20221117115010-6.png]]
91 -
92 -
93 -
94 -== 1.5 ​ Applications ==
95 -
96 -
97 -[[image:image-20221117114842-3.png]]
98 -
99 -
100 -
101 -== 1.6  Specification ==
102 -
103 -
104 -(% style="color:blue" %)**Common DC Characteristics:**
105 -
106 106  * Supply Voltage: 2.1v ~~ 3.6v
107 107  * Operating Temperature: -40 ~~ 85°C
108 108  
109 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
110 110  
111 111  * - B1 @H-FDD: 2100MHz
112 112  * - B3 @H-FDD: 1800MHz
... ... @@ -115,36 +115,47 @@
115 115  * - B20 @H-FDD: 800MHz
116 116  * - B28 @H-FDD: 700MHz
117 117  
118 -== 1.7  Pin Definitions and Switch ==
58 +**1.4 Installation**
119 119  
60 +Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
120 120  
121 -[[image:image-20221021110429-4.png]]
62 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png]] [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image002.png]] ​
122 122  
64 +**1.5 ​Applications**
123 123  
124 -=== 1.7.1  Pin Definition ===
66 +* Open/Close Detection
67 +* Pulse meter application
68 +* Dry Contact Detection
125 125  
70 +**1.6 Mechanical**
126 126  
127 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
72 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image003.png]]
128 128  
74 +**~ 1.7 Pin Definitions and Switch**
129 129  
76 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image004.png]]
130 130  
131 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
78 +**1.7.1 Pin Definition**
132 132  
80 +CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
133 133  
82 +**1.7.2 Jumper JP2(Power ON/OFF)**
83 +
84 +
134 134  Power on Device when putting this jumper.
135 135  
136 136  
137 137  
138 -=== 1.7.3  BOOT MODE / SW1 ===
89 +**1.7.3 BOOT MODE / SW1**
139 139  
140 140  
141 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
92 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
142 142  
143 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
94 +2) Flash: work mode, the device starts to work and send out console output for further debug
144 144  
145 145  
146 146  
147 -=== 1.7.4  Reset Button ===
98 +**1.7.4 Reset Button**
148 148  
149 149  
150 150  Press to reboot the device.
... ... @@ -151,312 +151,214 @@
151 151  
152 152  
153 153  
154 -=== 1.7.5  LED ===
105 +**1.7.5 LED**
155 155  
156 156  
157 -The LED will blink when :
108 +It will flash:
158 158  
159 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
160 160  
161 -2.  Send an uplink packet
162 162  
114 +**2.  Use CPN01 to communicate with IoT Server**
163 163  
116 +**2.1  How it works**
164 164  
165 -== 1.8  Magnet Distance ==
118 +The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
166 166  
120 +The diagram below shows the working flow in default firmware of CPN01:
167 167  
168 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
122 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image005.png||alt="说明: image-20220708101605-2.png"]]
169 169  
170 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
124 +**2.2 ​ Configure the CPN01**
171 171  
126 +**2.2.1 Test Requirement**
172 172  
128 +To use CPN01 in your city, make sure meet below requirements:
173 173  
174 -= 2.  Use NDS03A to communicate with IoT Server =
175 -
176 -== 2.1  How it works ==
177 -
178 -
179 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
180 -
181 -The diagram below shows the working flow in the default firmware of NDS03A:
182 -
183 -[[image:image-20221021110615-5.png]]
184 -
185 -
186 -
187 -== 2.2 ​ Configure NDS03A ==
188 -
189 -=== 2.2.1 Test Requirement ===
190 -
191 -
192 -To use NDS03A in your city, make sure to meet below requirements:
193 -
194 -* Your local operator has already distributed an NB-IoT Network.
195 -* The local NB-IoT network used the band that NDS03A supports.
130 +* Your local operator has already distributed a NB-IoT Network there.
131 +* The local NB-IoT network used the band that CPN01 supports.
196 196  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
197 197  
198 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
199 199  
200 -[[image:image-20221117142300-1.png]]
201 -
202 202   ​
203 203  
138 +**2.2.2 Insert SIM card**
204 204  
205 -=== 2.2.2 Insert NB-IoT SIM card ===
206 -
207 -
208 208  Insert the NB-IoT Card get from your provider.
209 209  
210 -User needs to take out the NB-IoT module and insert the SIM card like below:
142 +User need to take out the NB-IoT module and insert the SIM card like below:
211 211  
212 -[[image:image-20221021110745-6.png]] ​
144 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image006.png||alt="说明: 1657249468462-536.png"]] ​
213 213  
146 +**2.2.3 Connect USB – TTL to CPN01 to configure it**
214 214  
148 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
215 215  
216 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
150 +**Connection:**
217 217  
152 + USB TTL GND <~-~-~-~-> GND
218 218  
219 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
154 + USB TTL TXD <~-~-~-~-> UART_RXD
220 220  
221 -(% style="color:blue" %)**Connection:**
156 + USB TTL RXD <~-~-~-~-> UART_TXD
222 222  
223 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
224 -
225 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
226 -
227 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
228 -
229 -
230 230  In the PC, use below serial tool settings:
231 231  
232 -* Baud:  (% style="color:red" %)**9600**
160 +* Baud:  **9600**
161 +* Data bits:** 8**
162 +* Stop bits: **1**
163 +* Parity:  **None**
164 +* Flow Control: **None**
233 233  
234 -* Data bits:** (% style="color:red" %)8(%%)**
166 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
235 235  
236 -* Stop bits: (% style="color:red" %)**1**
168 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image007.png]]
237 237  
238 -* Parity:  (% style="color:red" %)**None**
170 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
239 239  
240 -* Flow Control: (% style="color:red" %)**None**
172 +**2.2.4 Use CoAP protocol to uplink data**
241 241  
242 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
174 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
243 243  
244 -​[[image:image-20221021110817-7.png]]
176 +**Use below commands:**
245 245  
246 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
178 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
179 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
180 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
247 247  
248 -
249 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
250 -
251 -
252 -
253 -=== 2.2.4 Use CoAP protocol to uplink data ===
254 -
255 -
256 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
257 -
258 -
259 -(% style="color:blue" %)**Use below commands in NDS03A:**
260 -
261 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
262 -
263 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
264 -
265 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
266 -
267 267  For parameter description, please refer to AT command set
268 268  
269 -[[image:image-20221021110948-8.png]]
184 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image008.png]]
270 270  
186 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
271 271  
272 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
188 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image009.png]] ​
273 273  
274 -[[image:image-20221021110956-9.png]] ​
190 +**2.2.5 Use UDP protocol to uplink data(Default protocol)**
275 275  
192 +This feature is supported since firmware version v1.0.1
276 276  
194 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
195 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
196 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
277 277  
278 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
198 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image010.png]]
279 279  
200 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image011.png||alt="说明: 1657249930215-289.png"]]
280 280  
281 -(% style="color:blue" %)**AT Commands:**
282 -
283 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
284 -
285 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
286 -
287 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
288 -
289 -​ [[image:image-20221021111025-10.png]]
290 -
291 -
292 -[[image:image-20221021111033-11.png||height="241" width="576"]]
293 -
294 294  ​
295 295  
204 +**2.2.6 Use MQTT protocol to uplink data**
296 296  
297 -=== 2.2.6 Use MQTT protocol to uplink data ===
206 +This feature is supported since firmware version v110
298 298  
208 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
209 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
210 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
211 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
212 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
213 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
214 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
299 299  
300 -(% style="color:blue" %)**AT Commands:**
216 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image012.png]]
301 301  
302 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
218 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image013.png]]
303 303  
304 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
305 -
306 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
307 -
308 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
309 -
310 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
311 -
312 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
313 -
314 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
315 -
316 -​ [[image:image-20221021111058-12.png]]
317 -
318 -
319 -[[image:image-20221021111201-16.png||height="472" width="653"]]
320 -
321 321  ​
322 322  
323 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
222 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
324 324  
224 +**2.2.7 Use TCP protocol to uplink data**
325 325  
226 +This feature is supported since firmware version v110
326 326  
327 -=== 2.2.7 Use TCP protocol to uplink data ===
228 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
229 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
328 328  
231 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image014.png]]
329 329  
330 -(% style="color:blue" %)**AT Commands:**
233 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image015.png||alt="说明: 1657250255956-604.png"]]
331 331  
332 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
333 -
334 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
335 -
336 -​ [[image:image-20221021111125-14.png]]
337 -
338 -[[image:image-20221021111131-15.png]]
339 -
340 340  ​
341 341  
237 +**2.2.8 Change Update Interval**
342 342  
343 -=== 2.2.8 Change Update Interval ===
239 +User can use below command to change the **uplink interval**.
344 344  
241 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
345 345  
346 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
243 +**NOTE:**
347 347  
348 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
245 +**~1. By default, the device will send an uplink message every 1 hour.**
349 349  
350 -(% style="color:red" %)**NOTE:**
247 +**2.3  Uplink Payload**
351 351  
352 -1.  By default, the device will send an uplink message every 4 hour.
249 +In this mode, uplink payload includes 87 bytes in total by default.
353 353  
251 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
354 354  
253 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
254 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
355 355  
356 -== 2.3  Uplink Payload ==
357 357  
257 +|2|2|4|8 group
258 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
358 358  
359 -The uplink payload includes 26 bytes in total by default.
260 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
360 360  
361 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
262 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image016.png]]
362 362  
363 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
364 -
365 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
366 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
367 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
368 -
369 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
370 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
371 -**1-32 group**
372 -)))
373 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
374 -
375 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
376 -
377 -
378 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
379 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
380 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
381 -
382 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
383 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
384 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
385 -
386 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
387 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
388 -**1-32 group**
389 -)))
390 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
391 -
392 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
393 -
394 -[[image:image-20221117145932-2.png]]
395 -
396 -
397 397  The payload is ASCII string, representative same HEX:
398 398  
399 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
266 +0xf86778705021331700640c7817010001000000090000026315537b 0100000b02000002663510fed0100000e0200000263510f39010000000000000063510e85010000000000000063510d2e010000000000000063510c7a010000000000000063510bc6010000000000000063510954010000000000000063510882 where:
400 400  
401 -**where:**
268 +* **Device ID: 0x f867787050213317 = f867787050213317**
269 +* **Version: 0x0064=100=1.0.0**
402 402  
403 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
271 +* **BAT: 0x0c78 = 3192 mV = 3.192V**
272 +* **Singal: 0x17 = 23**
273 +* **Mod: 0x01 = 1**
274 +* **Calculate Flag: 0x00= 0**
275 +* **Contact Status: 0x00= 0**
276 +* **Alarm:0x00 =0**
277 +* **Total pulse:0x09 =0**
278 +* **The last open duration:0x02 =2**
279 +* **Time stamp : 0x6315537b =1662342011**
280 +* **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000b0200002663510fed**
281 +* **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000e0200002663510f39,.......**
404 404  
405 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
283 +**2.4  Payload Explanation and Sensor Interface**
406 406  
407 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
285 +**2.4.1  Device ID**
408 408  
409 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
287 +By default, the Device ID equal to the last 15 bits of IMEI.
410 410  
411 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
289 +User can use **AT+DEUI** to set Device ID
412 412  
413 -* (% style="color:#037691" %)**Door Status:**(%%) 0x00=0
414 -
415 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
416 -
417 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
418 -
419 -* (% style="color:#037691" %)**last open time: **(%%)0x000017 =23
420 -
421 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
422 -
423 -== 2.4  Payload Explanation and Sensor Interface ==
424 -
425 -=== 2.4.1  Device ID ===
426 -
427 -
428 -By default, the Device ID is equal to the last 15 bits of IMEI.
429 -
430 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
431 -
432 432  **Example:**
433 433  
434 434  AT+DEUI=868411056754138
435 435  
436 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
295 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
437 437  
297 +**2.4.2  Version Info**
438 438  
439 -=== 2.4.2  Version Info ===
299 +Specify the software version: 0x64=100, means firmware version 1.00.
440 440  
301 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
441 441  
442 -Specify the software version: 0x64=100, which means firmware version 1.00.
303 +**2.4.3  Battery Info**
443 443  
444 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
305 +Check the battery voltage for CPN01.
445 445  
446 -
447 -=== 2.4.3  Battery Info ===
448 -
449 -
450 -Check the battery voltage for NDS03A.
451 -
452 452  Ex1: 0x0B45 = 2885mV
453 453  
454 454  Ex2: 0x0B49 = 2889mV
455 455  
311 +**2.4.4  Signal Strength**
456 456  
457 -=== 2.4.4  Signal Strength ===
458 -
459 -
460 460  NB-IoT Network signal Strength.
461 461  
462 462  **Ex1: 0x1d = 29**
... ... @@ -471,47 +471,58 @@
471 471  
472 472  **99**    Not known or not detectable
473 473  
327 +**2.4.5 Calculate Flag**
474 474  
475 -=== 2.4.5  Disalarm: (default: 0) ===
329 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
476 476  
331 +User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
477 477  
478 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
333 +Default value: 0. 
479 479  
480 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
335 +Range (6 bits): (b)000000 ~~ (b) 111111
481 481  
482 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
337 +**2.4.6  Alarm**
483 483  
339 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
484 484  
485 -=== 2.4.6  Keep Status & Keep Time ===
341 +**2.4.7 Contact Status**
486 486  
343 +0: Open
487 487  
488 -Shows the configure value of Alarm Base on Timeout Feature
345 +1: Close
489 489  
347 +**2.4.8 Total pulse**
490 490  
491 -=== 2.4.7  Timestamp ===
349 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
492 492  
351 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
493 493  
494 -Timestamp : 0x6315537b =1662342011
353 +**2.4.9 The last open duration**
495 495  
355 +Dry Contact last open duration.
496 496  
357 +Unit: min.
497 497  
498 -=== 2.4.8  Switch Dual Channel Mode ===
359 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image017.png]]
499 499  
500 500  
501 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
362 +**2.4.10  Timestamp**
502 502  
364 +Time stamp : 0x6315537b =1662342011
503 503  
504 -== 2.5  Downlink Payload ==
366 +Convert Unix timestamp to time 2022-9-5 9:40:11.
505 505  
368 +**~ **
506 506  
507 -By default, NDS03A prints the downlink payload to console port.
370 +**2.5  Downlink Payload**
508 508  
509 -[[image:image-20221021111414-18.png]] ​
372 +By default, CPN01 prints the downlink payload to console port.
510 510  
374 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image018.png||alt="说明: image-20220708133731-5.png"]] ​
511 511  
512 512  **Examples:**
513 513  
514 -* (% style="color:#037691" %)**Set TDC**
378 +* **Set TDC**
515 515  
516 516  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
517 517  
... ... @@ -519,236 +519,178 @@
519 519  
520 520  Payload:    01 00 00 3C    TDC=60S
521 521  
522 -* (% style="color:#037691" %)**Reset**
386 +* **Reset**
523 523  
524 -If payload = 0x04FF, it will reset the NDS03A
388 +If payload = 0x04FF, it will reset the NSE01
525 525  
526 -* (% style="color:#037691" %)**INTMOD**
390 +* **INTMOD**
527 527  
528 528  Downlink Payload: 06000003, Set AT+INTMOD=3
529 529  
394 +**2.6  ​LED Indicator**
530 530  
396 +The CPN01 has an internal LED which is to show the status of different state.
531 531  
532 -== 2.6  ​LED Indicator ==
533 -
534 -
535 -The NDS03A has an internal LED which is to show the status of different states.
536 -
537 -* When the device starts normally, the LED will light up for 1 second.
538 -* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
398 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
399 +* Then the LED will be on for 1 second means device is boot normally.
400 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
539 539  * For each uplink probe, LED will be on for 500ms.
540 540  
541 -== 2.7  Alarm Base on Timeout ==
403 +**2.7 ** Alarm Base on Timeout
542 542  
405 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
543 543  
544 -NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
545 545  
408 +**~1. Keep Status: Status to be monitor**
546 546  
547 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
548 -
549 549  Keep Status = 1: Monitor Close to Open event
550 550  
551 551  Keep Status = 0: Monitor Open to Close event
552 552  
553 553  
554 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
415 +**2. Keep Time: Timeout to send an Alarm**
555 555  
556 556  Range 0 ~~ 65535(0xFFFF) seconds.
557 557  
558 558  If keep time = 0, Disable Alarm Base on Timeout feature.
559 559  
560 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
421 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
561 561  
562 562  
563 -(% style="color:blue" %)**AT Command to configure:**
424 +**AT Command** to configure:
564 564  
565 -(% style="color:blue" %)**PB14 PIN:**
426 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
566 566  
567 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
428 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
568 568  
569 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
430 +**2.8** Set debug mode
570 570  
571 -
572 -(% style="color:blue" %)**PB15 PIN:**
573 -
574 -(% style="color:#037691" %)**AT+TTRIG2=1,30**
575 -
576 -(% style="color:#037691" %)**AT+TTRIG2=0,0 **
577 -
578 -
579 -== 2.8  Set debug mode ==
580 -
581 -
582 582  Feature: Enable or Disable debug mode
583 583  
584 -(% style="color:blue" %)**AT Command: AT+DEBUG**
585 585  
586 -[[image:image-20221021111629-21.png]]
435 +**AT Command: AT+DEBUG**
587 587  
437 +|**Command Example**|**Function**|**Response**
438 +|AT+DEBUG =0|Disable debug mode to 0|OK
439 +|AT+ DEBUG =1|Enable debug mode to 1|OK
588 588  
441 +== 2.9 Clear Flash Record ==
589 589  
590 -== 2.9  Clear Flash Record ==
591 -
592 -
593 593  Feature: Clear flash storage for data log feature.
594 594  
595 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
445 +**AT Command: AT+CLRDTA**
596 596  
597 -[[image:image-20221021111527-19.png]]
447 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image019.png||alt="说明: image-20220609151132-7.png"]]
598 598  
449 +**~ 2.10 **Set trigger mode
599 599  
451 +➢ AT Command: **AT+TTRMOD**
600 600  
601 -== 2.10  Count Mod ==
453 +Feature: Set the trigger interrupt mode.
602 602  
455 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image020.png||alt="说明: image-20220609151344-9.png"]]
603 603  
604 -(% style="color:blue" %)**AT Command: AT+COUNTMOD**
457 +**2.11** Set the calculate flag
605 605  
606 -[[image:image-20221118092935-1.png]]
459 +Feature: Set the calculate flag
607 607  
461 +**AT Command: AT+CALCFLAG**
608 608  
463 +|**Command Example**|**Function**|**Response**
464 +|AT+CALCFLAG =1|Set the calculate flag to 1.|OK
465 +|AT+CALCFLAG =2|Set the calculate flag to 2.|OK
609 609  
610 -== 2.11  Interrupt Pin Channel Mod ==
467 +**2.12** Set count number
611 611  
469 +Feature: Manually set the count number
612 612  
613 -(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
471 +**AT Command: AT+SETCNT**
614 614  
615 -[[image:image-20221118093144-2.png]]
473 +|**Command Example**|**Function**|**Response**
474 +|AT+ SETCNT =0|Set the count number to 0.|OK
475 +|AT+ SETCNT =100|Set the count number to 100.|OK
616 616  
617 617  
478 +**2.13 Set the number of data to be uploaded and the recording time**
618 618  
619 -== 2.12 TTRIG1/2 timeout status alarm ==
480 +➢ AT Command:
620 620  
482 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
621 621  
622 -It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
623 623  
624 -(% style="color:blue" %)**AT Command: AT+TTRALARM**
485 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
625 625  
626 -[[image:image-20221118093512-3.png]]
487 +**2.14 Read or Clear cached data**
627 627  
489 +➢ AT Command:
628 628  
491 +AT+CDP    ~/~/ Read cached data
629 629  
630 -== 2.13  Select counting mode ==
493 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image021.png]]
631 631  
632 632  
633 -(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
496 +AT+CDP=0    ~/~/ Clear cached data ​
634 634  
635 -When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
498 +**2.15  ​Firmware Change Log**
636 636  
637 -When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
500 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
638 638  
639 -[[image:image-20221118093658-4.png]]
502 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
640 640  
504 +**2.16  ​Battery Analysis**
641 641  
506 +**2.16.1  ​Battery Type**
642 642  
508 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
643 643  
644 -== 2.14  Set the number of data to be uploaded and the recording time ==
510 +The battery is designed to last for several years depends on the actually use environment and update interval. 
645 645  
512 +The battery related documents as below:
646 646  
647 -(% style="color:blue" %)**AT Command:**
648 -
649 -(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
650 -
651 -(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
652 -
653 -
654 -== 2.15  Read or Clear cached data ==
655 -
656 -
657 -(% style="color:blue" %)**AT Command:**
658 -
659 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
660 -
661 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
662 -
663 -[[image:image-20221118094227-5.png]]
664 -
665 -
666 -
667 -== 2.16  ​Firmware Change Log ==
668 -
669 -
670 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
671 -
672 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
673 -
674 -
675 -
676 -== 2.17  ​Battery Analysis ==
677 -
678 -
679 -=== 2.17.1  ​Battery Type ===
680 -
681 -
682 -The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
683 -
684 -The battery is designed to last for several years depends on the actual use environment and update interval. 
685 -
686 -The battery-related documents as below:
687 -
688 688  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
689 -
690 690  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
691 -
692 692  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
693 693  
694 -[[image:image-20221021111911-26.png]] ​
518 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image022.png||alt="说明: image-20220708140453-6.png"]] ​
695 695  
520 +**2.16.2  Power consumption Analyze**
696 696  
697 -
698 -=== 2.17.2  Power consumption Analyze ===
699 -
700 -
701 701  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
702 702  
703 703  Instruction to use as below:
704 704  
705 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
526 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
706 706  
707 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
528 +**Step 2: ** Open it and choose
708 708  
709 709  * Product Model
710 -
711 711  * Uplink Interval
712 -
713 713  * Working Mode
714 714  
715 715  And the Life expectation in difference case will be shown on the right.
716 716  
717 -[[image:1666596205057-567.png]] ​
536 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image023.jpg||alt="说明: image-20220708141352-7.jpeg"]] ​
718 718  
538 +**2.16.3  ​Battery Note**
719 719  
720 -
721 -=== 2.17.3  ​Battery Note ===
722 -
723 -
724 724  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
725 725  
542 +**2.16.4  Replace the battery**
726 726  
544 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
727 727  
728 -=== 2.17.4  Replace the battery ===
546 +**3. ​ Access NB-IoT Module**
729 729  
730 -
731 -The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
732 -
733 -
734 -
735 -= 3. ​ Access NB-IoT Module =
736 -
737 -
738 738  Users can directly access the AT command set of the NB-IoT module.
739 739  
740 740  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
741 741  
742 -[[image:image-20221118094449-6.png]] ​
552 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image024.png||alt="说明: 1657261278785-153.png"]] ​
743 743  
554 +**4.  Using the AT Commands**
744 744  
556 +**4.1  Access AT Commands**
745 745  
746 -= 4.  Using the AT Commands =
747 -
748 -
749 -== 4.1  Access AT Commands ==
750 -
751 -
752 752  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
753 753  
754 754  AT+<CMD>?  : Help on <CMD>
... ... @@ -759,9 +759,8 @@
759 759  
760 760  AT+<CMD>=?  : Get the value
761 761  
568 +**General Commands**      
762 762  
763 -(% style="color:blue" %)**General Commands**      
764 -
765 765  AT  : Attention       
766 766  
767 767  AT?  : Short Help     
... ... @@ -784,41 +784,35 @@
784 784  
785 785  AT+SERVADDR  : Server Address
786 786  
787 -AT+TR      :  Get or Set record time
592 +AT+TR      : Get or Set record time"
788 788  
594 +
789 789  AT+NOUD      : Get or Set the number of data to be uploaded
790 790  
791 -AT+CDP     :  Read or Clear cached data
792 792  
793 -AT+ DEBUG   : Enable or Disable debug mode
598 +AT+CDP     : Read or Clear cached data
794 794  
795 -AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
796 796  
797 -AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
601 +AT+ DEBUG   : Enable or Disable debug mode
798 798  
799 -AT+COUNTMOD  :  Get or Set the count mode
603 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
800 800  
801 -AT+TTRCHANNEL  : Get or Set the number of interrupt channels
605 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
802 802  
803 -AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
607 +AT+ CALCFLAG   : Get or Set the calculate flag
804 804  
805 -AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
609 +AT+ CLRC   : Clear current door open count
806 806  
807 -AT+ CLRC   :  Clear current door open count
611 +**COAP Management**      
808 808  
809 -
810 -(% style="color:blue" %)**COAP Management**      
811 -
812 812  AT+URI            : Resource parameters
813 813  
615 +**UDP Management**
814 814  
815 -(% style="color:blue" %)**UDP Management**
816 -
817 817  AT+CFM          : Upload confirmation mode (only valid for UDP)
818 818  
619 +**MQTT Management**
819 819  
820 -(% style="color:blue" %)**MQTT Management**
821 -
822 822  AT+CLIENT               : Get or Set MQTT client
823 823  
824 824  AT+UNAME  : Get or Set MQTT Username
... ... @@ -829,65 +829,86 @@
829 829  
830 830  AT+SUBTOPIC  : Get or Set MQTT subscription topic
831 831  
631 +**Information**          
832 832  
833 -(% style="color:blue" %)**Information**          
834 -
835 835  AT+FDR  : Factory Data Reset
836 836  
837 837  AT+PWORD  : Serial Access Password
838 838  
637 +**​5.  FAQ**
839 839  
639 +**5.1 ​ How to Upgrade Firmware**
840 840  
841 -= ​5.  FAQ =
641 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
842 842  
643 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
843 843  
844 -== 5.1 ​ How to Upgrade Firmware ==
645 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
845 845  
647 +**5.2  Can I calibrate CPN01 to different soil types?**
846 846  
847 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
649 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
848 848  
849 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
651 +**6.  Trouble Shooting**
850 850  
851 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
653 +**6.1  ​Connection problem when uploading firmware**
852 852  
655 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
853 853  
657 +**6.2  AT Command input doesn't work**
854 854  
855 -= 6.  Trouble Shooting =
659 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
856 856  
661 +**7. ​ Order Info**
857 857  
858 -== 6.1  ​Connection problem when uploading firmware ==
663 +Part Number**:** CPN01
859 859  
665 +**8.  Packing Info**
860 860  
861 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
667 +**Package Includes**:
862 862  
669 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
670 +* External antenna x 1
863 863  
672 +**Dimension and weight**:
864 864  
865 -== 6.2  AT Command input doesn't work ==
674 +* Size: 195 x 125 x 55 mm
675 +* Weight:   420g
866 866  
677 +**9.  Support**
867 867  
868 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
679 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
680 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
869 869  
682 +​
870 870  
871 871  
872 -= 7. ​ Order Info =
873 873  
874 874  
875 -Part Number**:** NDS03A
876 876  
877 877  
878 878  
879 -= 8.  Packing Info =
880 880  
881 881  
882 -(% style="color:blue" %)**Package Includes**:
883 883  
884 -* NDS03A Open/Close Door Sensor x 1
885 885  
886 -= 9.  Support =
887 887  
888 888  
889 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
890 890  
891 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
892 892  
893 -​
698 +
699 +
700 +
701 +
702 +
703 +
704 +
705 +
706 +
707 +
708 +
709 +
710 +
711 +
712 +
713 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -20.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0