Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 67.3 >
edited by Xiaoling
on 2022/11/18 09:58
To version < 81.3 >
edited by Xiaoling
on 2022/12/07 18:09
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
Content
... ... @@ -1,12 +1,7 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:LMDS200_10.jpg]]
3 3  
4 4  
5 -
6 -
7 -
8 -
9 -
10 10  **Table of Contents：**
11 11  
12 12  
... ... @@ -15,39 +15,26 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
13 +== 1.1 ​ What is NMDS200 NB-IoT Microwave Radar Distance Sensor ==
19 19  
20 20  
21 21  (((
22 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
23 -)))
17 +The Dragino NMDS200 is a(% style="color:blue" %)** NB-IoT Microwave Radar distance sensor**(%%). It uses (% style="color:blue" %)**24Ghz Microwave**(%%) to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is (% style="color:blue" %)**more reliable for condensation / dusty environment**(%%). It can sense correct distance even there is water or thick dust on top of the sensor.
24 24  
25 -(((
26 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
27 -)))
28 28  
29 -(((
30 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
31 -)))
20 +The NMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
32 32  
33 -(((
34 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
35 -)))
22 +NMDS200 can (% style="color:blue" %)**measure two distances**(%%): the closest object and next object behind the closest one.
36 36  
37 -(((
38 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
39 -)))
24 +NMDS200 (% style="color:blue" %)**supports Alarm Feature**(%%), user can set the NMDS200 to uplink data in a short interval when the distance is out of configured range.
40 40  
41 -(((
42 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
43 -)))
26 +NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
44 44  
45 -(((
46 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
47 -)))
28 +NMDS200 (% style="color:blue" %)**supports different uplink**(%%) methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
48 48  
49 -(((
50 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
30 +NMDS200 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**,(%%) It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
31 +
32 +To use NMDS200, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NMDS200 supports. If local operator support it, user needs to get a** (% style="color:blue" %)NB-IoT SIM card(%%)** from the operator and install into NMDS200 to get NB-IoT network connection.
51 51  )))
52 52  
53 53  
... ... @@ -56,10 +56,9 @@
56 56  
57 57  
58 58  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
59 -* Open/Close detect
60 -* Open/Close statistics
41 +* Short uplink interval for Distance Alarm
61 61  * Monitor Battery Level
62 -* connect two door sensors
43 +* Microwave Radar for distance detection
63 63  * Datalog feature
64 64  * Uplink periodically
65 65  * Downlink to change configure
... ... @@ -70,32 +70,42 @@
70 70  * Micro SIM card slot for NB-IoT SIM
71 71  * 8500mAh Battery for long-term use
72 72  
73 -== 1.3  Storage & Operation ==
54 +== 1.3 Radar probe specification ==
74 74  
75 75  
76 -Temperature -40°C to +85°C
57 +* Measuring Method: FMCW
58 +* Frequency: 24.000 24.500 GHz
59 +* Measurement output power: 6dBm
60 +* Measure range: 0.5 20m
61 +* Accuracy: ±0.1m
62 +* Resolution: 0.01m
63 +* Horizontal Angel: 78°
64 +* Vertical Angel: 23°
77 77  
78 78  
79 -== 1.4  Mechanical ==
67 +== 1.4  Storage Temperature ==
80 80  
81 81  
82 -[[image:image-20221117114937-4.png]]
70 + -40°C to +85°C
83 83  
84 84  
85 -[[image:image-20221117114949-5.png]]
86 86  
87 87  
88 -[[image:image-20221117115010-6.png]]
89 89  
90 -
91 -
92 92  == 1.5 ​ Applications ==
93 93  
94 94  
95 -[[image:image-20221117114842-3.png]]
96 96  
80 +* Horizontal distance measurement
81 +* Liquid level measurement
82 +* Parking management system
83 +* Object proximity and presence detection
84 +* Intelligent trash can management system
85 +* Robot obstacle avoidance
86 +* Automatic control
87 +* Sewer
88 +* Bottom water level monitoring
97 97  
98 -
99 99  == 1.6  Specification ==
100 100  
101 101  
... ... @@ -102,107 +102,62 @@
102 102  (% style="color:blue" %)**Common DC Characteristics:**
103 103  
104 104  * Supply Voltage: 2.1v ~~ 3.6v
105 -* Operating Temperature: -40 ~~ 85°C
96 +* Operating Temperature: 0 ~~ 70°C
106 106  
107 107  (% style="color:blue" %)**NB-IoT Spec:**
108 108  
109 -* - B1 @H-FDD: 2100MHz
110 -* - B3 @H-FDD: 1800MHz
111 -* - B8 @H-FDD: 900MHz
112 -* - B5 @H-FDD: 850MHz
113 -* - B20 @H-FDD: 800MHz
114 -* - B28 @H-FDD: 700MHz
100 +* B1 @H-FDD: 2100MHz
101 +* B3 @H-FDD: 1800MHz
102 +* B8 @H-FDD: 900MHz
103 +* B5 @H-FDD: 850MHz
104 +* B20 @H-FDD: 800MHz
105 +* B28 @H-FDD: 700MHz
115 115  
116 -== 1.7  Pin Definitions and Switch ==
107 +== 1.7  Installation ==
117 117  
118 118  
119 -[[image:image-20221021110429-4.png]]
110 +Sensor measure direction and angle is as below. When install the sensor, please make sure the sensor direct to object.
120 120  
121 121  
122 -=== 1.7.1  Pin Definition ===
113 +[[image:image-20221207170748-1.png]] [[image:image-20221207170748-2.png||height="366" width="672"]]
123 123  
124 124  
125 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
126 126  
117 +== 1.8  Pin Definitions and Switch ==
127 127  
128 128  
129 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
120 +[[image:1670404362039-351.png]]
130 130  
131 131  
132 -Power on Device when putting this jumper.
123 += 2.  Use NMDS200 to communicate with IoT Server =
133 133  
134 -
135 -
136 -=== 1.7.3  BOOT MODE / SW1 ===
137 -
138 -
139 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
140 -
141 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
142 -
143 -
144 -
145 -=== 1.7.4  Reset Button ===
146 -
147 -
148 -Press to reboot the device.
149 -
150 -
151 -
152 -=== 1.7.5  LED ===
153 -
154 -
155 -The LED will blink when :
156 -
157 -1.  Boot the device in flash mode
158 -
159 -2.  Send an uplink packet
160 -
161 -
162 -
163 -== 1.8  Magnet Distance ==
164 -
165 -
166 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
167 -
168 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
169 -
170 -
171 -
172 -= 2.  Use NDS03A to communicate with IoT Server =
173 -
174 174  == 2.1  How it works ==
175 175  
176 176  
177 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
128 +The NB-IoT network will forward this value to IoT server via the protocol defined by NMDS200.
178 178  
179 -The diagram below shows the working flow in the default firmware of NDS03A:
130 +The diagram below shows the working flow in the default firmware of NMDS200:
180 180  
181 181  [[image:image-20221021110615-5.png]]
182 182  
183 183  
135 +== 2.2 ​ Configure NMDS200 ==
184 184  
185 -== 2.2 ​ Configure NDS03A ==
186 186  
187 -=== 2.2.1 Test Requirement ===
138 +To use NMDS200 in your city, make sure to meet below requirements:
188 188  
189 -
190 -To use NDS03A in your city, make sure to meet below requirements:
191 -
192 192  * Your local operator has already distributed an NB-IoT Network.
193 -* The local NB-IoT network used the band that NDS03A supports.
141 +* The local NB-IoT network used the band that NMDS200 supports.
194 194  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
195 195  
196 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
144 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NMDS200 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
197 197  
198 -[[image:image-20221117142300-1.png]]
146 +[[image:image-20221207173300-4.png]]
199 199  
200 - ​
201 201  
149 +=== 2.2.1 Insert NB-IoT SIM card ===
202 202  
203 -=== 2.2.2 Insert NB-IoT SIM card ===
204 204  
205 -
206 206  Insert the NB-IoT Card get from your provider.
207 207  
208 208  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -210,12 +210,11 @@
210 210  [[image:image-20221021110745-6.png]] ​
211 211  
212 212  
159 +=== 2.2.2 Connect USB – TTL to NMDS200 and configure it ===
213 213  
214 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
215 215  
162 +User need to configure NMDS200 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NMDS200 support AT Commands, user can use a USB to TTL adapter to connect to NMDS200 and use AT Commands to configure it, as below.
216 216  
217 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
218 -
219 219  (% style="color:blue" %)**Connection:**
220 220  
221 221  (% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
... ... @@ -237,11 +237,11 @@
237 237  
238 238  * Flow Control: (% style="color:red" %)**None**
239 239  
240 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
185 +Make sure the switch is in FLASH position, then power on NMDS200 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
241 241  
242 242  ​[[image:image-20221021110817-7.png]]
243 243  
244 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
189 +NMDS200 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
245 245  
246 246  
247 247  (% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
... ... @@ -248,7 +248,7 @@
248 248  
249 249  
250 250  
251 -=== 2.2.4 Use CoAP protocol to uplink data ===
196 +=== 2.2.3 Use CoAP protocol to uplink data ===
252 252  
253 253  
254 254  (% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
... ... @@ -267,15 +267,14 @@
267 267  [[image:image-20221021110948-8.png]]
268 268  
269 269  
270 -After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
215 +After configuring the server address and (% style="color:green" %)**reset NMDS200**(%%) (via AT+ATZ ), NMDS200 will start to uplink sensor values to the CoAP server.
271 271  
272 -[[image:image-20221021110956-9.png]] ​
217 +[[image:1670405841875-916.png]] ​
273 273  
274 274  
220 +=== 2.2.4 Use UDP protocol to uplink data(Default protocol) ===
275 275  
276 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
277 277  
278 -
279 279  (% style="color:blue" %)**AT Commands:**
280 280  
281 281  * (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
... ... @@ -291,10 +291,9 @@
291 291  
292 292  ​
293 293  
238 +=== 2.2.5 Use MQTT protocol to uplink data ===
294 294  
295 -=== 2.2.6 Use MQTT protocol to uplink data ===
296 296  
297 -
298 298  (% style="color:blue" %)**AT Commands:**
299 299  
300 300  * (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
... ... @@ -311,10 +311,10 @@
311 311  
312 312  * (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
313 313  
314 -​ [[image:image-20221021111058-12.png]]
257 +​ [[image:image-20221118103445-7.png]]
315 315  
316 316  
317 -[[image:image-20221021111201-16.png||height="472" width="653"]]
260 +[[image:1670405928926-116.png]]
318 318  
319 319  ​
320 320  
... ... @@ -321,10 +321,9 @@
321 321  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
322 322  
323 323  
267 +=== 2.2.6 Use TCP protocol to uplink data ===
324 324  
325 -=== 2.2.7 Use TCP protocol to uplink data ===
326 326  
327 -
328 328  (% style="color:blue" %)**AT Commands:**
329 329  
330 330  * (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
... ... @@ -331,19 +331,19 @@
331 331  
332 332  * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
333 333  
334 -​ [[image:image-20221021111125-14.png]]
276 +​ [[image:1670406036256-101.png||height="676" width="713"]]
335 335  
278 +
336 336  [[image:image-20221021111131-15.png]]
337 337  
338 338  ​
339 339  
283 +=== 2.2.7 Change Update Interval ===
340 340  
341 -=== 2.2.8 Change Update Interval ===
342 342  
343 -
344 344  User can use below command to change the (% style="color:blue" %)**uplink interval**.
345 345  
346 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
288 +* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (4 hours)
347 347  
348 348  (% style="color:red" %)**NOTE:**
349 349  
... ... @@ -350,77 +350,56 @@
350 350  1.  By default, the device will send an uplink message every 4 hour.
351 351  
352 352  
353 -
354 354  == 2.3  Uplink Payload ==
355 355  
356 356  
357 -The uplink payload includes 26 bytes in total by default.
298 +The uplink payload includes 23 bytes in total by default.
358 358  
359 359  Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
360 360  
361 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
362 362  
363 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
364 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
365 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
303 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
304 +|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:50px" %)**1**|(% style="width:90px" %)**2**|(% style="width:100px" %)**2**
305 +|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Exit flag|(% style="width:94px" %) Distance 1 |(% style="width:93px" %) Distance  2
366 366  
367 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
368 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
307 +(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
308 +|(% style="width:50px" %)**4**|(% style="width:90px" %)**2**|(% style="width:90px" %)**2**|(% style="width:60px" %)**4**|(% style="width:50px" %)(((
369 369  **1-32 group**
370 370  )))
371 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
311 +|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]| Distance 1 | Distance  2|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
372 372  
373 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
313 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NMDS200 uplink data.
374 374  
315 +[[image:1670406261143-723.png]]
375 375  
376 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
377 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
378 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
379 379  
380 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
381 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
382 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPN01-%20NB-IoT%20Outdoor%20OpenClose%20Dry%20Contact%20Sensor%C2%A0User%20Manual/#H2.4.7A0ContactStatus]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)Time stamp|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
318 +The payload is ASCII string, representative same HEX: f867787050471071  0064  0cc3  09  01  00 00ef  013d  6390453d
383 383  
384 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
385 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
386 -**1-32 group**
387 -)))
388 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)Time stamp|(% style="width:87px" %)...
320 +**0x (% style="color:red" %)__f867787050471071__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0cc3__(% style="color:#00b0f0" %) 0__9__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00ef__(% style="color:#660066" %) (% style="color:#663300" %)__013d__ (% style="color:#d60093" %)__6390453d__(%%)**
389 389  
390 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
391 -
392 -[[image:image-20221117145932-2.png]]
393 -
394 -
395 -The payload is ASCII string, representative same HEX:
396 -
397 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
398 -
399 399  **where:**
400 400  
401 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
324 +* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050471071 = f867787050471071
402 402  
403 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
326 +* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
404 404  
405 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
328 +* (% style="color:#037691" %)**BAT :**(%%)  0x0cc3 = 3267 mV = 3.267V
406 406  
407 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
330 +* (% style="color:#037691" %)**Singal: **(%%)0x09 = 9
408 408  
409 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
332 +* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
410 410  
411 -* (% style="color:#037691" %)**Door Status:**(%%) 0x00=0
334 +* (% style="color:#037691" %)**Exit flag: **(%%)0x00 =0
412 412  
413 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
336 +* (% style="color:#037691" %)**Distance 1: **(%%)0x00ef=239
414 414  
415 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
338 +* (% style="color:#037691" %)**Distance 2: **(%%)0x013d =317
416 416  
417 -* (% style="color:#037691" %)**last open time: **(%%)0x000017 =23
340 +* (% style="color:#037691" %)**Timestamp: **(%%)0x6390453d =1670399293 (Unix Time)
418 418  
419 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
420 420  
421 421  == 2.4  Payload Explanation and Sensor Interface ==
422 422  
423 -
424 424  === 2.4.1  Device ID ===
425 425  
426 426  
... ... @@ -440,13 +440,13 @@
440 440  
441 441  Specify the software version: 0x64=100, which means firmware version 1.00.
442 442  
443 -For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
364 +For example 0x00 64 : This device is NMDS200 1 with firmware version 1.0.0.
444 444  
445 445  
446 446  === 2.4.3  Battery Info ===
447 447  
448 448  
449 -Check the battery voltage for NDS03A.
370 +Check the battery voltage for NMDS200.
450 450  
451 451  Ex1: 0x0B45 = 2885mV
452 452  
... ... @@ -471,39 +471,35 @@
471 471  **99**    Not known or not detectable
472 472  
473 473  
474 -=== 2.4.5  Disalarm: (default: 0) ===
395 +=== 2.4.5  Distance ===
475 475  
476 476  
477 -(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
398 +[[image:1670407401682-959.png]]
478 478  
479 -(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
400 +(% style="color:blue" %)**Object1 Distance:**
480 480  
481 - (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
402 +Distance between sensor probe to the first object. (unit: cm)
482 482  
404 +For example, if the data you get from the register is 0x02 0x05, the distance between the sensor and the measured object is
483 483  
484 -=== 2.4.6  Keep Status & Keep Time ===
406 +(% style="color:blue" %)**0205(H) = 517 (D) = 517 cm.**
485 485  
486 486  
487 -Shows the configure value of Alarm Base on Timeout Feature
409 +(% style="color:blue" %)**Object2 Distance:**
488 488  
411 +Distance between sensor probe to the second object. (unit: cm)
489 489  
490 -=== 2.4.7  Timestamp ===
491 491  
414 +=== 2.4.6  Timestamp ===
492 492  
416 +
493 493  Timestamp : 0x6315537b =1662342011
494 494  
495 495  
496 -
497 -=== 2.4.8  Switch Dual Channel Mode ===
498 -
499 -
500 -NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
501 -
502 -
503 503  == 2.5  Downlink Payload ==
504 504  
505 505  
506 -By default, NDS03A prints the downlink payload to console port.
423 +By default, NMDS200 prints the downlink payload to console port.
507 507  
508 508  [[image:image-20221021111414-18.png]] ​
509 509  
... ... @@ -520,7 +520,7 @@
520 520  
521 521  * (% style="color:#037691" %)**Reset**
522 522  
523 -If payload = 0x04FF, it will reset the NDS03A
440 +If payload = 0x04FF, it will reset the NMDS200
524 524  
525 525  * (% style="color:#037691" %)**INTMOD**
526 526  
... ... @@ -527,19 +527,20 @@
527 527  Downlink Payload: 06000003, Set AT+INTMOD=3
528 528  
529 529  
530 -
531 531  == 2.6  ​LED Indicator ==
532 532  
533 533  
534 -The NDS03A has an internal LED which is to show the status of different states.
450 +The NMDS200 has an internal LED which is to show the status of different states.
535 535  
536 536  * When the device starts normally, the LED will light up for 1 second.
537 537  * After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
538 538  * For each uplink probe, LED will be on for 500ms.
539 539  
540 -== 2.7  Alarm Base on Timeout ==
541 541  
542 542  
458 +== 2.7  Distance alarm function ==
459 +
460 +
543 543  NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
544 544  
545 545  
... ... @@ -596,7 +596,6 @@
596 596  [[image:image-20221021111527-19.png]]
597 597  
598 598  
599 -
600 600  == 2.10  Count Mod ==
601 601  
602 602  
... ... @@ -605,7 +605,6 @@
605 605  [[image:image-20221118092935-1.png]]
606 606  
607 607  
608 -
609 609  == 2.11  Interrupt Pin Channel Mod ==
610 610  
611 611  
... ... @@ -614,7 +614,6 @@
614 614  [[image:image-20221118093144-2.png]]
615 615  
616 616  
617 -
618 618  == 2.12 TTRIG1/2 timeout status alarm ==
619 619  
620 620  
... ... @@ -625,7 +625,6 @@
625 625  [[image:image-20221118093512-3.png]]
626 626  
627 627  
628 -
629 629  == 2.13  Select counting mode ==
630 630  
631 631  
... ... @@ -638,8 +638,6 @@
638 638  [[image:image-20221118093658-4.png]]
639 639  
640 640  
641 -
642 -
643 643  == 2.14  Set the number of data to be uploaded and the recording time ==
644 644  
645 645  
... ... @@ -662,19 +662,16 @@
662 662  [[image:image-20221118094227-5.png]]
663 663  
664 664  
665 -
666 666  == 2.16  ​Firmware Change Log ==
667 667  
668 668  
669 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
580 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
670 670  
671 671  Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
672 672  
673 673  
674 -
675 675  == 2.17  ​Battery Analysis ==
676 676  
677 -
678 678  === 2.17.1  ​Battery Type ===
679 679  
680 680  
... ... @@ -693,7 +693,6 @@
693 693  [[image:image-20221021111911-26.png]] ​
694 694  
695 695  
696 -
697 697  === 2.17.2  Power consumption Analyze ===
698 698  
699 699  
... ... @@ -716,7 +716,6 @@
716 716  [[image:1666596205057-567.png]] ​
717 717  
718 718  
719 -
720 720  === 2.17.3  ​Battery Note ===
721 721  
722 722  
... ... @@ -723,7 +723,6 @@
723 723  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
724 724  
725 725  
726 -
727 727  === 2.17.4  Replace the battery ===
728 728  
729 729  
... ... @@ -730,7 +730,6 @@
730 730  The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
731 731  
732 732  
733 -
734 734  = 3. ​ Access NB-IoT Module =
735 735  
736 736  
... ... @@ -738,13 +738,12 @@
738 738  
739 739  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
740 740  
646 +
741 741  [[image:image-20221118094449-6.png]] ​
742 742  
743 743  
744 -
745 745  = 4.  Using the AT Commands =
746 746  
747 -
748 748  == 4.1  Access AT Commands ==
749 749  
750 750  
... ... @@ -836,10 +836,8 @@
836 836  AT+PWORD  : Serial Access Password
837 837  
838 838  
839 -
840 840  = ​5.  FAQ =
841 841  
842 -
843 843  == 5.1 ​ How to Upgrade Firmware ==
844 844  
845 845  
... ... @@ -850,10 +850,8 @@
850 850  (% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
851 851  
852 852  
853 -
854 854  = 6.  Trouble Shooting =
855 855  
856 -
857 857  == 6.1  ​Connection problem when uploading firmware ==
858 858  
859 859  
... ... @@ -860,7 +860,6 @@
860 860  (% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
861 861  
862 862  
863 -
864 864  == 6.2  AT Command input doesn't work ==
865 865  
866 866  
... ... @@ -867,7 +867,6 @@
867 867  In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
868 868  
869 869  
870 -
871 871  = 7. ​ Order Info =
872 872  
873 873  
... ... @@ -874,7 +874,6 @@
874 874  Part Number**:** NDS03A
875 875  
876 876  
877 -
878 878  = 8.  Packing Info =
879 879  
880 880  
1670404362039-351.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1670405841875-916.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.1 KB
Content
1670405928926-116.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.7 KB
Content
1670406036256-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +181.0 KB
Content
1670406261143-723.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.9 KB
Content
1670407401682-959.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +23.7 KB
Content
LMDS200_10.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.5 KB
Content
image-20221207170748-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +26.1 KB
Content
image-20221207170748-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.9 KB
Content
image-20221207173200-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.7 KB
Content
image-20221207173300-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.0 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0