Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 61.5 >
edited by Xiaoling
on 2022/11/17 16:45
To version < 75.1 >
edited by Xiaoling
on 2022/12/07 17:32
>
Change comment: Uploaded new attachment "image-20221207173200-3.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
Content
... ... @@ -1,12 +1,7 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:LMDS200_10.jpg]]
3 3  
4 4  
5 -
6 -
7 -
8 -
9 -
10 10  **Table of Contents：**
11 11  
12 12  
... ... @@ -15,39 +15,26 @@
15 15  
16 16  = 1.  Introduction =
17 17  
18 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
13 +== 1.1 ​ What is NMDS200 NB-IoT Microwave Radar Distance Sensor ==
19 19  
20 20  
21 21  (((
22 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
23 -)))
17 +The Dragino NMDS200 is a(% style="color:blue" %)** NB-IoT Microwave Radar distance sensor**(%%). It uses (% style="color:blue" %)**24Ghz Microwave**(%%) to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is (% style="color:blue" %)**more reliable for condensation / dusty environment**(%%). It can sense correct distance even there is water or thick dust on top of the sensor.
24 24  
25 -(((
26 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
27 -)))
28 28  
29 -(((
30 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
31 -)))
20 +The NMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
32 32  
33 -(((
34 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
35 -)))
22 +NMDS200 can (% style="color:blue" %)**measure two distances**(%%): the closest object and next object behind the closest one.
36 36  
37 -(((
38 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
39 -)))
24 +NMDS200 (% style="color:blue" %)**supports Alarm Feature**(%%), user can set the NMDS200 to uplink data in a short interval when the distance is out of configured range.
40 40  
41 -(((
42 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
43 -)))
26 +NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
44 44  
45 -(((
46 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
47 -)))
28 +NMDS200 (% style="color:blue" %)**supports different uplink**(%%) methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
48 48  
49 -(((
50 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
30 +NMDS200 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**,(%%) It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
31 +
32 +To use NMDS200, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NMDS200 supports. If local operator support it, user needs to get a** (% style="color:blue" %)NB-IoT SIM card(%%)** from the operator and install into NMDS200 to get NB-IoT network connection.
51 51  )))
52 52  
53 53  
... ... @@ -56,10 +56,9 @@
56 56  
57 57  
58 58  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
59 -* Open/Close detect
60 -* Open/Close statistics
41 +* Short uplink interval for Distance Alarm
61 61  * Monitor Battery Level
62 -* connect two door sensors
43 +* Microwave Radar for distance detection
63 63  * Datalog feature
64 64  * Uplink periodically
65 65  * Downlink to change configure
... ... @@ -70,32 +70,48 @@
70 70  * Micro SIM card slot for NB-IoT SIM
71 71  * 8500mAh Battery for long-term use
72 72  
73 -== 1.3  Storage & Operation ==
74 74  
75 75  
76 -Temperature -40°C to +85°C
56 +== 1.3 Radar probe specification ==
77 77  
78 78  
79 -== 1.4  Mechanical ==
59 +* Measuring Method: FMCW
60 +* Frequency: 24.000 24.500 GHz
61 +* Measurement output power: 6dBm
62 +* Measure range: 0.5 20m
63 +* Accuracy: ±0.1m
64 +* Resolution: 0.01m
65 +* Horizontal Angel: 78°
66 +* Vertical Angel: 23°
80 80  
81 81  
82 -[[image:image-20221117114937-4.png]]
83 83  
84 84  
85 -[[image:image-20221117114949-5.png]]
71 +== 1.4  Storage Temperature ==
86 86  
87 87  
88 -[[image:image-20221117115010-6.png]]
74 + -40°C to +85°C
89 89  
90 90  
91 91  
78 +
79 +
92 92  == 1.5 ​ Applications ==
93 93  
94 94  
95 -[[image:image-20221117114842-3.png]]
96 96  
84 +* Horizontal distance measurement
85 +* Liquid level measurement
86 +* Parking management system
87 +* Object proximity and presence detection
88 +* Intelligent trash can management system
89 +* Robot obstacle avoidance
90 +* Automatic control
91 +* Sewer
92 +* Bottom water level monitoring
97 97  
98 98  
95 +
99 99  == 1.6  Specification ==
100 100  
101 101  
... ... @@ -102,86 +102,47 @@
102 102  (% style="color:blue" %)**Common DC Characteristics:**
103 103  
104 104  * Supply Voltage: 2.1v ~~ 3.6v
105 -* Operating Temperature: -40 ~~ 85°C
102 +* Operating Temperature: 0 ~~ 70°C
106 106  
107 107  (% style="color:blue" %)**NB-IoT Spec:**
108 108  
109 -* - B1 @H-FDD: 2100MHz
110 -* - B3 @H-FDD: 1800MHz
111 -* - B8 @H-FDD: 900MHz
112 -* - B5 @H-FDD: 850MHz
113 -* - B20 @H-FDD: 800MHz
114 -* - B28 @H-FDD: 700MHz
106 +* B1 @H-FDD: 2100MHz
107 +* B3 @H-FDD: 1800MHz
108 +* B8 @H-FDD: 900MHz
109 +* B5 @H-FDD: 850MHz
110 +* B20 @H-FDD: 800MHz
111 +* B28 @H-FDD: 700MHz
115 115  
116 -== 1.7  Pin Definitions and Switch ==
117 117  
118 118  
119 -[[image:image-20221021110429-4.png]]
115 +== 1.7  Installation ==
120 120  
121 121  
122 -=== 1.7.1  Pin Definition ===
118 +Sensor measure direction and angle is as below. When install the sensor, please make sure the sensor direct to object.
123 123  
124 124  
125 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
121 +[[image:image-20221207170748-1.png]] [[image:image-20221207170748-2.png||height="366" width="672"]]
126 126  
127 127  
128 128  
129 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
125 +== 1.8  Pin Definitions and Switch ==
130 130  
131 131  
132 -Power on Device when putting this jumper.
128 +[[image:1670404362039-351.png]]
133 133  
134 134  
131 += 2.  Use NMDS200 to communicate with IoT Server =
135 135  
136 -=== 1.7.3  BOOT MODE / SW1 ===
137 -
138 -
139 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
140 -
141 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
142 -
143 -
144 -
145 -=== 1.7.4  Reset Button ===
146 -
147 -
148 -Press to reboot the device.
149 -
150 -
151 -
152 -=== 1.7.5  LED ===
153 -
154 -
155 -The LED will blink when :
156 -
157 -1.  Boot the device in flash mode
158 -
159 -2.  Send an uplink packet
160 -
161 -
162 -
163 -== 1.8  Magnet Distance ==
164 -
165 -
166 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
167 -
168 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
169 -
170 -
171 -
172 -= 2.  Use CPN01 to communicate with IoT Server =
173 -
174 174  == 2.1  How it works ==
175 175  
176 176  
177 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
136 +The NB-IoT network will forward this value to IoT server via the protocol defined by NMDS200.
178 178  
179 -The diagram below shows the working flow in the default firmware of NDS03A:
138 +The diagram below shows the working flow in the default firmware of NMDS200:
180 180  
181 181  [[image:image-20221021110615-5.png]]
182 182  
183 183  
184 -
185 185  == 2.2 ​ Configure NDS03A ==
186 186  
187 187  === 2.2.1 Test Requirement ===
... ... @@ -197,9 +197,7 @@
197 197  
198 198  [[image:image-20221117142300-1.png]]
199 199  
200 - ​
201 201  
202 -
203 203  === 2.2.2 Insert NB-IoT SIM card ===
204 204  
205 205  
... ... @@ -210,7 +210,6 @@
210 210  [[image:image-20221021110745-6.png]] ​
211 211  
212 212  
213 -
214 214  === 2.2.3 Connect USB – TTL to NDS03A and configure it ===
215 215  
216 216  
... ... @@ -254,7 +254,7 @@
254 254  (% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
255 255  
256 256  
257 -(% style="color:blue" %)**Use below commands in CPN01:**
212 +(% style="color:blue" %)**Use below commands in NDS03A:**
258 258  
259 259  * (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
260 260  
... ... @@ -267,12 +267,11 @@
267 267  [[image:image-20221021110948-8.png]]
268 268  
269 269  
270 -After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
225 +After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
271 271  
272 -[[image:image-20221021110956-9.png]] ​
227 +[[image:image-20221118103547-9.png||height="605" width="837"]] ​
273 273  
274 274  
275 -
276 276  === 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
277 277  
278 278  
... ... @@ -291,7 +291,6 @@
291 291  
292 292  ​
293 293  
294 -
295 295  === 2.2.6 Use MQTT protocol to uplink data ===
296 296  
297 297  
... ... @@ -311,10 +311,10 @@
311 311  
312 312  * (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
313 313  
314 -​ [[image:image-20221021111058-12.png]]
267 +​ [[image:image-20221118103445-7.png]]
315 315  
316 316  
317 -[[image:image-20221021111201-16.png||height="472" width="653"]]
270 +[[image:image-20221118103453-8.png||height="608" width="841"]]
318 318  
319 319  ​
320 320  
... ... @@ -321,7 +321,6 @@
321 321  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
322 322  
323 323  
324 -
325 325  === 2.2.7 Use TCP protocol to uplink data ===
326 326  
327 327  
... ... @@ -337,7 +337,6 @@
337 337  
338 338  ​
339 339  
340 -
341 341  === 2.2.8 Change Update Interval ===
342 342  
343 343  
... ... @@ -350,7 +350,6 @@
350 350  1.  By default, the device will send an uplink message every 4 hour.
351 351  
352 352  
353 -
354 354  == 2.3  Uplink Payload ==
355 355  
356 356  
... ... @@ -360,32 +360,32 @@
360 360  
361 361  (% style="color:blue" %)**When AT+TTRCHANNEL=1:**
362 362  
363 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
364 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
365 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
313 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
314 +|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:50px" %)**1**|(% style="width:60px" %)**1**|(% style="width:90px" %)**3**|(% style="width:100px" %)**3**
315 +|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
366 366  
367 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
368 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
317 +(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
318 +|(% style="width:50px" %)**4**|(% style="width:90px" %)**1**|(% style="width:90px" %)**3**|(% style="width:90px" %)**3**|(% style="width:60px" %)4|(% style="width:50px" %)(((
369 369  **1-32 group**
370 370  )))
371 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
321 +|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
372 372  
373 373  (% style="color:blue" %)**When AT+TTRCHANNEL=2:**
374 374  
375 375  
376 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
377 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
378 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
326 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
327 +|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:45px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:60px" %)**1**|(% style="width:60px" %)**1**|(% style="width:87px" %)**3**|(% style="width:80px" %)**3**
328 +|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
379 379  
380 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
381 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
382 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPN01-%20NB-IoT%20Outdoor%20OpenClose%20Dry%20Contact%20Sensor%C2%A0User%20Manual/#H2.4.7A0ContactStatus]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)Time stamp|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
330 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
331 +|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:75px" %)**1**|(% style="width:75px" %)**3**
332 +|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
383 383  
384 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
385 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
334 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
335 +|(% style="width:100px" %)**3**|(% style="width:80px" %)**1**|(% style="width:90px" %)**3**|(% style="width:90px" %)**3**|(% style="width:70px" %)**4**|(% style="width:80px" %)(((
386 386  **1-32 group**
387 387  )))
388 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)Time stamp|(% style="width:87px" %)...
338 +|(% style="width:102px" %)last open time(pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:100px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
389 389  
390 390  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
391 391  
... ... @@ -400,27 +400,26 @@
400 400  
401 401  * (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
402 402  
403 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
353 +* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
404 404  
405 405  * (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
406 406  
407 407  * (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
408 408  
409 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
359 +* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
410 410  
411 -* (% style="color:#037691" %)**Door Status:**(%%) 0x00=0
361 +* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
412 412  
413 413  * (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
414 414  
415 415  * (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
416 416  
417 -* (% style="color:#037691" %)**last open time: **(%%)0x000017 =23
367 +* (% style="color:#037691" %)**last open time:   **(%%)0x000017 =23
418 418  
419 419  * (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
420 420  
421 421  == 2.4  Payload Explanation and Sensor Interface ==
422 422  
423 -
424 424  === 2.4.1  Device ID ===
425 425  
426 426  
... ... @@ -435,7 +435,6 @@
435 435  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
436 436  
437 437  
438 -
439 439  === 2.4.2  Version Info ===
440 440  
441 441  
... ... @@ -444,7 +444,6 @@
444 444  For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
445 445  
446 446  
447 -
448 448  === 2.4.3  Battery Info ===
449 449  
450 450  
... ... @@ -455,7 +455,6 @@
455 455  Ex2: 0x0B49 = 2889mV
456 456  
457 457  
458 -
459 459  === 2.4.4  Signal Strength ===
460 460  
461 461  
... ... @@ -474,7 +474,6 @@
474 474  **99**    Not known or not detectable
475 475  
476 476  
477 -
478 478  === 2.4.5  Disalarm: (default: 0) ===
479 479  
480 480  
... ... @@ -485,57 +485,28 @@
485 485   (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
486 486  
487 487  
433 +=== 2.4.6  Keep Status & Keep Time ===
488 488  
489 -=== 2.4.6  Alarm ===
490 490  
436 +Shows the configure value of Alarm Base on Timeout Feature
491 491  
492 -See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
493 493  
439 +=== 2.4.7  Timestamp ===
494 494  
495 495  
496 -=== 2.4.7  Contact Status ===
442 +Timestamp : 0x6315537b =1662342011
497 497  
498 498  
499 -0: Open
445 +=== 2.4.8  Switch Dual Channel Mode ===
500 500  
501 -1: Close
502 502  
448 +NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
503 503  
504 504  
505 -=== 2.4.8  Total pulse ===
506 -
507 -
508 -Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
509 -
510 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
511 -
512 -
513 -
514 -=== 2.4.9  The last open duration ===
515 -
516 -
517 -Dry Contact last open duration.
518 -
519 -Unit: min.
520 -
521 -[[image:image-20221021111346-17.png||height="146" width="770"]]
522 -
523 -
524 -
525 -=== 2.4.10  Timestamp ===
526 -
527 -
528 -Timestamp : 0x6315537b =1662342011
529 -
530 -Convert Unix timestamp to time 2022-9-5 9:40:11.
531 -
532 -**~ **
533 -
534 -
535 535  == 2.5  Downlink Payload ==
536 536  
537 537  
538 -By default, CPN01 prints the downlink payload to console port.
454 +By default, NDS03A prints the downlink payload to console port.
539 539  
540 540  [[image:image-20221021111414-18.png]] ​
541 541  
... ... @@ -552,7 +552,7 @@
552 552  
553 553  * (% style="color:#037691" %)**Reset**
554 554  
555 -If payload = 0x04FF, it will reset the NSE01
471 +If payload = 0x04FF, it will reset the NDS03A
556 556  
557 557  * (% style="color:#037691" %)**INTMOD**
558 558  
... ... @@ -559,20 +559,19 @@
559 559  Downlink Payload: 06000003, Set AT+INTMOD=3
560 560  
561 561  
562 -
563 563  == 2.6  ​LED Indicator ==
564 564  
565 565  
566 -The CPN01 has an internal LED which is to show the status of different states.
481 +The NDS03A has an internal LED which is to show the status of different states.
567 567  
568 568  * When the device starts normally, the LED will light up for 1 second.
569 -* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
484 +* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
570 570  * For each uplink probe, LED will be on for 500ms.
571 571  
572 572  == 2.7  Alarm Base on Timeout ==
573 573  
574 574  
575 -CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
490 +NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
576 576  
577 577  
578 578  (% style="color:blue" %)**1. Keep Status: Status to be monitor**
... ... @@ -588,17 +588,25 @@
588 588  
589 589  If keep time = 0, Disable Alarm Base on Timeout feature.
590 590  
591 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
506 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
592 592  
593 593  
594 594  (% style="color:blue" %)**AT Command to configure:**
595 595  
596 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
511 +(% style="color:blue" %)**PB14 PIN:**
597 597  
513 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
514 +
598 598  (% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
599 599  
600 600  
518 +(% style="color:blue" %)**PB15 PIN:**
601 601  
520 +(% style="color:#037691" %)**AT+TTRIG2=1,30**
521 +
522 +(% style="color:#037691" %)**AT+TTRIG2=0,0 **
523 +
524 +
602 602  == 2.8  Set debug mode ==
603 603  
604 604  
... ... @@ -620,54 +620,57 @@
620 620  [[image:image-20221021111527-19.png]]
621 621  
622 622  
546 +== 2.10  Count Mod ==
623 623  
624 -== 2.10  Set trigger mode ==
625 625  
549 +(% style="color:blue" %)**AT Command: AT+COUNTMOD**
626 626  
627 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
551 +[[image:image-20221118092935-1.png]]
628 628  
629 -Feature: Set the trigger interrupt mode.
630 630  
631 -[[image:image-20221021111552-20.png]]
554 +== 2.11  Interrupt Pin Channel Mod ==
632 632  
633 633  
557 +(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
634 634  
635 -== 2.11  Set the calculate flag ==
559 +[[image:image-20221118093144-2.png]]
636 636  
637 637  
638 -Feature: Set the calculate flag
562 +== 2.12 TTRIG1/2 timeout status alarm ==
639 639  
640 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
641 641  
642 -[[image:image-20221021111711-22.png]]
565 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
643 643  
567 +(% style="color:blue" %)**AT Command: AT+TTRALARM**
644 644  
569 +[[image:image-20221118093512-3.png]]
645 645  
646 -== 2.12 Set count number ==
647 647  
572 +== 2.13  Select counting mode ==
648 648  
649 -Feature: Manually set the count number
650 650  
651 -(% style="color:blue" %)**AT Command: AT+SETCNT**
575 +(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
652 652  
653 -[[image:image-20221021111748-24.png]]
577 +When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
654 654  
579 +When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
655 655  
581 +[[image:image-20221118093658-4.png]]
656 656  
657 -== 2.13  Set the number of data to be uploaded and the recording time ==
658 658  
584 +== 2.14  Set the number of data to be uploaded and the recording time ==
659 659  
586 +
660 660  (% style="color:blue" %)**AT Command:**
661 661  
662 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
589 +(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
663 663  
664 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
591 +(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
665 665  
666 666  
594 +== 2.15  Read or Clear cached data ==
667 667  
668 -== 2.14  Read or Clear cached data ==
669 669  
670 -
671 671  (% style="color:blue" %)**AT Command:**
672 672  
673 673  (% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
... ... @@ -674,27 +674,24 @@
674 674  
675 675  (% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
676 676  
677 -[[image:image-20221021111810-25.png||height="364" width="797"]]
603 +[[image:image-20221118094227-5.png]]
678 678  
679 679  
606 +== 2.16  ​Firmware Change Log ==
680 680  
681 -== 2.15  ​Firmware Change Log ==
682 682  
609 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
683 683  
684 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
685 -
686 686  Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
687 687  
688 688  
614 +== 2.17  ​Battery Analysis ==
689 689  
690 -== 2.16  ​Battery Analysis ==
616 +=== 2.17.1  ​Battery Type ===
691 691  
692 692  
693 -=== 2.16.1  ​Battery Type ===
619 +The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
694 694  
695 -
696 -The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
697 -
698 698  The battery is designed to last for several years depends on the actual use environment and update interval. 
699 699  
700 700  The battery-related documents as below:
... ... @@ -708,10 +708,9 @@
708 708  [[image:image-20221021111911-26.png]] ​
709 709  
710 710  
634 +=== 2.17.2  Power consumption Analyze ===
711 711  
712 -=== 2.16.2  Power consumption Analyze ===
713 713  
714 -
715 715  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
716 716  
717 717  Instruction to use as below:
... ... @@ -731,21 +731,18 @@
731 731  [[image:1666596205057-567.png]] ​
732 732  
733 733  
656 +=== 2.17.3  ​Battery Note ===
734 734  
735 -=== 2.16.3  ​Battery Note ===
736 736  
737 -
738 738  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
739 739  
740 740  
662 +=== 2.17.4  Replace the battery ===
741 741  
742 -=== 2.16.4  Replace the battery ===
743 743  
665 +The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
744 744  
745 -The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
746 746  
747 -
748 -
749 749  = 3. ​ Access NB-IoT Module =
750 750  
751 751  
... ... @@ -753,13 +753,12 @@
753 753  
754 754  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
755 755  
756 -[[image:image-20221021112006-28.png]] ​
757 757  
676 +[[image:image-20221118094449-6.png]] ​
758 758  
759 759  
760 760  = 4.  Using the AT Commands =
761 761  
762 -
763 763  == 4.1  Access AT Commands ==
764 764  
765 765  
... ... @@ -806,15 +806,21 @@
806 806  
807 807  AT+ DEBUG   : Enable or Disable debug mode
808 808  
809 -AT+ TTRIG   : Get or Set Alarm Base on Timeout
727 +AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
810 810  
811 -AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
729 +AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
812 812  
813 -AT+ CALCFLAG   : Get or Set the calculate flag
731 +AT+COUNTMOD  :  Get or Set the count mode
814 814  
815 -AT+ CLRC   : Clear current door open count
733 +AT+TTRCHANNEL  : Get or Set the number of interrupt channels
816 816  
735 +AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
817 817  
737 +AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
738 +
739 +AT+ CLRC   :  Clear current door open count
740 +
741 +
818 818  (% style="color:blue" %)**COAP Management**      
819 819  
820 820  AT+URI            : Resource parameters
... ... @@ -845,10 +845,8 @@
845 845  AT+PWORD  : Serial Access Password
846 846  
847 847  
848 -
849 849  = ​5.  FAQ =
850 850  
851 -
852 852  == 5.1 ​ How to Upgrade Firmware ==
853 853  
854 854  
... ... @@ -856,13 +856,11 @@
856 856  
857 857  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
858 858  
859 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
781 +(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
860 860  
861 861  
862 -
863 863  = 6.  Trouble Shooting =
864 864  
865 -
866 866  == 6.1  ​Connection problem when uploading firmware ==
867 867  
868 868  
... ... @@ -869,7 +869,6 @@
869 869  (% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
870 870  
871 871  
872 -
873 873  == 6.2  AT Command input doesn't work ==
874 874  
875 875  
... ... @@ -876,27 +876,19 @@
876 876  In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
877 877  
878 878  
879 -
880 880  = 7. ​ Order Info =
881 881  
882 882  
883 -Part Number**:** CPN01
801 +Part Number**:** NDS03A
884 884  
885 885  
886 -
887 887  = 8.  Packing Info =
888 888  
889 889  
890 890  (% style="color:blue" %)**Package Includes**:
891 891  
892 -* CPN01 Open/Close Sensor x 1
893 -* External antenna x 1
809 +* NDS03A Open/Close Door Sensor x 1
894 894  
895 -(% style="color:blue" %)**Dimension and weight**:
896 -
897 -* Size: 195 x 125 x 55 mm
898 -* Weight:   420g
899 -
900 900  = 9.  Support =
901 901  
902 902  
1670404362039-351.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
LMDS200_10.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.5 KB
Content
image-20221207170748-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +26.1 KB
Content
image-20221207170748-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.9 KB
Content
image-20221207173200-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0