Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 61.4 >
edited by Xiaoling
on 2022/11/17 16:40
To version < 47.1 >
edited by David Huang
on 2022/10/24 10:33
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,65 +1,34 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 +{{toc/}}
4 4  
6 += **1. Introduction** =
5 5  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
6 6  
10 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
7 7  
12 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
8 8  
14 +CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
9 9  
10 -**Table of Contents：**
16 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
11 11  
18 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
19 +\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
20 +\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
21 +\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
12 12  
23 +​
13 13  
25 +== **​1.2 Features** ==
14 14  
15 -
16 -= 1.  Introduction =
17 -
18 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
19 -
20 -
21 -(((
22 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
23 -)))
24 -
25 -(((
26 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
27 -)))
28 -
29 -(((
30 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
31 -)))
32 -
33 -(((
34 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
35 -)))
36 -
37 -(((
38 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
39 -)))
40 -
41 -(((
42 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
43 -)))
44 -
45 -(((
46 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
47 -)))
48 -
49 -(((
50 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
51 -)))
52 -
53 -
54 -
55 -== ​1.2  Features ==
56 -
57 -
58 58  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
59 59  * Open/Close detect
60 60  * Open/Close statistics
61 61  * Monitor Battery Level
62 -* connect two door sensors
31 +* Uplink on periodically and open/close event
63 63  * Datalog feature
64 64  * Uplink periodically
65 65  * Downlink to change configure
... ... @@ -70,41 +70,14 @@
70 70  * Micro SIM card slot for NB-IoT SIM
71 71  * 8500mAh Battery for long-term use
72 72  
73 -== 1.3  Storage & Operation ==
42 +== **1.3  Specification** ==
74 74  
44 +**Common DC Characteristics:**
75 75  
76 -Temperature -40°C to +85°C
77 -
78 -
79 -== 1.4  Mechanical ==
80 -
81 -
82 -[[image:image-20221117114937-4.png]]
83 -
84 -
85 -[[image:image-20221117114949-5.png]]
86 -
87 -
88 -[[image:image-20221117115010-6.png]]
89 -
90 -
91 -
92 -== 1.5 ​ Applications ==
93 -
94 -
95 -[[image:image-20221117114842-3.png]]
96 -
97 -
98 -
99 -== 1.6  Specification ==
100 -
101 -
102 -(% style="color:blue" %)**Common DC Characteristics:**
103 -
104 104  * Supply Voltage: 2.1v ~~ 3.6v
105 105  * Operating Temperature: -40 ~~ 85°C
106 106  
107 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
108 108  
109 109  * - B1 @H-FDD: 2100MHz
110 110  * - B3 @H-FDD: 1800MHz
... ... @@ -113,96 +113,90 @@
113 113  * - B20 @H-FDD: 800MHz
114 114  * - B28 @H-FDD: 700MHz
115 115  
116 -== 1.7  Pin Definitions and Switch ==
58 +== **1.4 Installation** ==
117 117  
60 +Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
118 118  
119 -[[image:image-20221021110429-4.png]]
62 +[[image:image-20221021110329-1.png]]
120 120  
64 +[[image:image-20221022234602-2.png||height="288" width="922"]]
121 121  
122 -=== 1.7.1  Pin Definition ===
123 123  
67 +== **1.5 ​Applications** ==
124 124  
125 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
69 +* Open/Close Detection
70 +* Pulse meter application
71 +* Dry Contact Detection
126 126  
73 +== **1.6 Mechanical** ==
127 127  
75 +​[[image:image-20221021110415-3.png]]
128 128  
129 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
77 +== ** 1.7 Pin Definitions and Switch** ==
130 130  
79 +[[image:image-20221021110429-4.png]]
131 131  
132 -Power on Device when putting this jumper.
81 +=== **1.7.1 Pin Definition** ===
133 133  
83 +CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
134 134  
135 135  
136 -=== 1.7.3  BOOT MODE / SW1 ===
86 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
137 137  
88 +Power on Device when putting this jumper.
138 138  
139 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
140 140  
141 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
91 +=== **1.7.3 BOOT MODE / SW1** ===
142 142  
143 143  
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
144 144  
145 -=== 1.7.4  Reset Button ===
96 +2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
146 146  
147 147  
148 -Press to reboot the device.
99 +=== **1.7.4 Reset Button** ===
149 149  
150 150  
102 +Press to reboot the device.
151 151  
152 -=== 1.7.5  LED ===
153 153  
105 +=== **1.7.5 LED** ===
154 154  
107 +
155 155  The LED will blink when :
156 156  
157 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
158 158  
159 -2.  Send an uplink packet
113 += **2.  Use CPN01 to communicate with IoT Server** =
160 160  
115 +== **2.1  How it works** ==
161 161  
117 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
162 162  
163 -== 1.8  Magnet Distance ==
119 +The diagram below shows the working flow in the default firmware of CPN01:
164 164  
165 -
166 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
167 -
168 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
169 -
170 -
171 -
172 -= 2.  Use CPN01 to communicate with IoT Server =
173 -
174 -== 2.1  How it works ==
175 -
176 -
177 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
178 -
179 -The diagram below shows the working flow in the default firmware of NDS03A:
180 -
181 181  [[image:image-20221021110615-5.png]]
182 182  
183 183  
124 +== **2.2 ​ Configure CPN01** ==
184 184  
185 -== 2.2 ​ Configure NDS03A ==
126 +=== **2.2.1 Test Requirement** ===
186 186  
187 -=== 2.2.1 Test Requirement ===
128 +To use CPN01 in your city, make sure to meet below requirements:
188 188  
189 -
190 -To use NDS03A in your city, make sure to meet below requirements:
191 -
192 192  * Your local operator has already distributed an NB-IoT Network.
193 -* The local NB-IoT network used the band that NDS03A supports.
131 +* The local NB-IoT network used the band that CPN01 supports.
194 194  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
195 195  
196 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
197 197  
198 -[[image:image-20221117142300-1.png]]
136 +[[image:image-20221023000439-3.png]]
199 199  
200 200   ​
201 201  
140 +=== **2.2.2 Insert NB-IoT SIM card** ===
202 202  
203 -=== 2.2.2 Insert NB-IoT SIM card ===
204 -
205 -
206 206  Insert the NB-IoT Card get from your provider.
207 207  
208 208  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -210,110 +210,87 @@
210 210  [[image:image-20221021110745-6.png]] ​
211 211  
212 212  
149 +=== **2.2.3 Connect USB – TTL to CPN01 and configure it** ===
213 213  
214 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
151 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
215 215  
153 +**Connection:**
216 216  
217 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
155 + USB TTL GND <~-~-~-~-> GND
218 218  
219 -(% style="color:blue" %)**Connection:**
157 + USB TTL TXD <~-~-~-~-> UART_RXD
220 220  
221 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
159 + USB TTL RXD <~-~-~-~-> UART_TXD
222 222  
223 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
224 -
225 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
226 -
227 -
228 228  In the PC, use below serial tool settings:
229 229  
230 -* Baud:  (% style="color:red" %)**9600**
163 +* Baud:  **9600**
164 +* Data bits:** 8**
165 +* Stop bits: **1**
166 +* Parity:  **None**
167 +* Flow Control: **None**
231 231  
232 -* Data bits:** (% style="color:red" %)8(%%)**
169 +Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
233 233  
234 -* Stop bits: (% style="color:red" %)**1**
235 -
236 -* Parity:  (% style="color:red" %)**None**
237 -
238 -* Flow Control: (% style="color:red" %)**None**
239 -
240 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
241 -
242 242  ​[[image:image-20221021110817-7.png]]
243 243  
244 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
173 +CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
245 245  
246 246  
247 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
248 248  
249 249  
179 +=== **2.2.4 Use CoAP protocol to uplink data** ===
250 250  
251 -=== 2.2.4 Use CoAP protocol to uplink data ===
181 +**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
252 252  
253 253  
254 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
184 +**Use below commands in CPN01:**
255 255  
186 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
187 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ Set CoAP server address and port
188 +* **AT+URI=0,0,11,2,"mqtt" ** ~/~/Set CoAP resource path
256 256  
257 -(% style="color:blue" %)**Use below commands in CPN01:**
258 -
259 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
260 -
261 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
262 -
263 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
264 -
265 265  For parameter description, please refer to AT command set
266 266  
267 267  [[image:image-20221021110948-8.png]]
268 268  
269 269  
270 -After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
195 +After configuring the server address and **reset CPN01** (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
271 271  
272 272  [[image:image-20221021110956-9.png]] ​
273 273  
274 274  
200 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
275 275  
276 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
277 277  
203 +**AT Commands:**
278 278  
279 -(% style="color:blue" %)**AT Commands:**
205 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
206 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ Set UDP server address and port
207 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
280 280  
281 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
282 -
283 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
284 -
285 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
286 -
287 287  ​ [[image:image-20221021111025-10.png]]
288 288  
289 -
290 290  [[image:image-20221021111033-11.png||height="241" width="576"]]
291 291  
292 292  ​
293 293  
215 +=== **2.2.6 Use MQTT protocol to uplink data** ===
294 294  
295 -=== 2.2.6 Use MQTT protocol to uplink data ===
296 296  
218 +**AT Commands:**
297 297  
298 -(% style="color:blue" %)**AT Commands:**
220 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
221 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
222 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
223 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
224 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
225 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
226 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
299 299  
300 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
301 -
302 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
303 -
304 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
305 -
306 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
307 -
308 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
309 -
310 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
311 -
312 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
313 -
314 314  ​ [[image:image-20221021111058-12.png]]
315 315  
316 -
317 317  [[image:image-20221021111201-16.png||height="472" width="653"]]
318 318  
319 319  ​
... ... @@ -321,16 +321,13 @@
321 321  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
322 322  
323 323  
237 +=== **2.2.7 Use TCP protocol to uplink data** ===
324 324  
325 -=== 2.2.7 Use TCP protocol to uplink data ===
239 +**AT Commands**
326 326  
241 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
242 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ Set TCP server address and port
327 327  
328 -(% style="color:blue" %)**AT Commands:**
329 -
330 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
331 -
332 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
333 -
334 334  ​ [[image:image-20221021111125-14.png]]
335 335  
336 336  [[image:image-20221021111131-15.png]]
... ... @@ -337,98 +337,73 @@
337 337  
338 338  ​
339 339  
250 +=== **2.2.8 Change Update Interval** ===
340 340  
341 -=== 2.2.8 Change Update Interval ===
252 +User can use below command to change the **uplink interval**.
342 342  
254 +* **AT+TDC=7200      ** ~/~/ Set Update Interval to 7200s (2 hours)
343 343  
344 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
256 +**NOTE:**
345 345  
346 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
258 +**~1. By default, the device will send an uplink message every 1 hour.**
347 347  
348 -(% style="color:red" %)**NOTE:**
349 349  
350 -1.  By default, the device will send an uplink message every 4 hour.
261 +== **2.3  Uplink Payload** ==
351 351  
263 +The uplink payload includes 123 bytes in total by default.
352 352  
265 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
353 353  
354 -== 2.3  Uplink Payload ==
267 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**1**|**1**|**3**
268 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[ Calculate Flag>>path:#H2.4.8A0DigitalInterrupt]]|Contact Status|Alarm|Total pulse
355 355  
270 +(% style="width:1201px" %)
271 +|**3**|**4**|**1**|**3**|**1**|**3**|4|**8 group**|(% style="width:1px" %)
272 +|The last open duration|Time stamp|Contact Status|Total pulse|Calculate Flag|The last open duration|Time stamp|...|(% style="width:1px" %)
356 356  
357 -The uplink payload includes 26 bytes in total by default.
274 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
358 358  
359 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
276 +[[image:image-20221021111201-16.png||height="572" width="792"]]
360 360  
361 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
362 -
363 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
364 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
365 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
366 -
367 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
368 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
369 -**1-32 group**
370 -)))
371 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
372 -
373 -
374 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
375 -
376 -
377 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
378 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
379 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
380 -
381 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
382 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
383 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPN01-%20NB-IoT%20Outdoor%20OpenClose%20Dry%20Contact%20Sensor%C2%A0User%20Manual/#H2.4.7A0ContactStatus]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)Time stamp|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
384 -
385 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
386 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
387 -**1-32 group**
388 -)))
389 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)Time stamp|(% style="width:87px" %)...
390 -
391 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
392 -
393 -[[image:image-20221117145932-2.png]]
394 -
395 -
396 396  The payload is ASCII string, representative same HEX:
397 397  
398 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
280 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
399 399  
400 -**where:**
282 +where:
283 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
401 401  
402 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
285 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
403 403  
404 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
287 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
405 405  
406 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
289 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
407 407  
408 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
291 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
409 409  
410 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
293 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00=0
411 411  
412 -* (% style="color:#037691" %)**Door Status:**(%%) 0x00=0
295 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00=0
413 413  
414 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
297 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
415 415  
416 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
299 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
417 417  
418 -* (% style="color:#037691" %)**last open time: **(%%)0x000017 =23
301 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
419 419  
420 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
303 +*(% style="color:#037691" %)** Time stamp :**(%%) 0x6315537b =1662342011 (Unix Time)
421 421  
305 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 01  00000b  02  000026  63510fed
422 422  
423 -== 2.4  Payload Explanation and Sensor Interface ==
307 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
424 424  
425 425  
426 -=== 2.4.1  Device ID ===
310 +== **2.4  Payload Explanation and Sensor Interface** ==
427 427  
312 +=== **2.4.1  Device ID** ===
428 428  
429 429  By default, the Device ID is equal to the last 15 bits of IMEI.
430 430  
431 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
316 +User can use **AT+DEUI** to set Device ID
432 432  
433 433  **Example:**
434 434  
... ... @@ -437,19 +437,15 @@
437 437  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
438 438  
439 439  
325 +=== **2.4.2  Version Info** ===
440 440  
441 -=== 2.4.2  Version Info ===
442 -
443 -
444 444  Specify the software version: 0x64=100, which means firmware version 1.00.
445 445  
446 446  For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
447 447  
448 448  
332 +=== **2.4.3  Battery Info** ===
449 449  
450 -=== 2.4.3  Battery Info ===
451 -
452 -
453 453  Check the battery voltage for CPN01.
454 454  
455 455  Ex1: 0x0B45 = 2885mV
... ... @@ -457,10 +457,8 @@
457 457  Ex2: 0x0B49 = 2889mV
458 458  
459 459  
341 +=== **2.4.4  Signal Strength** ===
460 460  
461 -=== 2.4.4  Signal Strength ===
462 -
463 -
464 464  NB-IoT Network signal Strength.
465 465  
466 466  **Ex1: 0x1d = 29**
... ... @@ -476,10 +476,8 @@
476 476  **99**    Not known or not detectable
477 477  
478 478  
358 +=== **2.4.5 Calculate Flag** ===
479 479  
480 -=== 2.4.5  Calculate Flag ===
481 -
482 -
483 483  The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
484 484  
485 485  User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
... ... @@ -489,35 +489,27 @@
489 489  Range (6 bits): (b)000000 ~~ (b) 111111
490 490  
491 491  
369 +=== **2.4.6  Alarm** ===
492 492  
493 -=== 2.4.6  Alarm ===
371 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
494 494  
495 495  
496 -See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
374 +=== **2.4.7 Contact Status** ===
497 497  
498 -
499 -
500 -=== 2.4.7  Contact Status ===
501 -
502 -
503 503  0: Open
504 504  
505 505  1: Close
506 506  
507 507  
381 +=== **2.4.8 Total pulse** ===
508 508  
509 -=== 2.4.8  Total pulse ===
383 +Total pulse/counting based on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
510 510  
511 -
512 -Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
513 -
514 514  Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
515 515  
516 516  
388 +=== **2.4.9 The last open duration** ===
517 517  
518 -=== 2.4.9  The last open duration ===
519 -
520 -
521 521  Dry Contact last open duration.
522 522  
523 523  Unit: min.
... ... @@ -525,10 +525,8 @@
525 525  [[image:image-20221021111346-17.png||height="146" width="770"]]
526 526  
527 527  
397 +=== **2.4.10  Timestamp** ===
528 528  
529 -=== 2.4.10  Timestamp ===
530 -
531 -
532 532  Timestamp : 0x6315537b =1662342011
533 533  
534 534  Convert Unix timestamp to time 2022-9-5 9:40:11.
... ... @@ -535,18 +535,15 @@
535 535  
536 536  **~ **
537 537  
405 +== **2.5  Downlink Payload** ==
538 538  
539 -== 2.5  Downlink Payload ==
540 -
541 -
542 542  By default, CPN01 prints the downlink payload to console port.
543 543  
544 544  [[image:image-20221021111414-18.png]] ​
545 545  
546 -
547 547  **Examples:**
548 548  
549 -* (% style="color:#037691" %)**Set TDC**
413 +* **Set TDC**
550 550  
551 551  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
552 552  
... ... @@ -554,19 +554,16 @@
554 554  
555 555  Payload:    01 00 00 3C    TDC=60S
556 556  
557 -* (% style="color:#037691" %)**Reset**
421 +* **Reset**
558 558  
559 559  If payload = 0x04FF, it will reset the NSE01
560 560  
561 -* (% style="color:#037691" %)**INTMOD**
425 +* **INTMOD**
562 562  
563 563  Downlink Payload: 06000003, Set AT+INTMOD=3
564 564  
429 +== **2.6  ​LED Indicator** ==
565 565  
566 -
567 -== 2.6  ​LED Indicator ==
568 -
569 -
570 570  The CPN01 has an internal LED which is to show the status of different states.
571 571  
572 572  * When the device starts normally, the LED will light up for 1 second.
... ... @@ -573,13 +573,12 @@
573 573  * After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
574 574  * For each uplink probe, LED will be on for 500ms.
575 575  
576 -== 2.7  Alarm Base on Timeout ==
437 +== **2.7  Alarm Base on Timeout** ==
577 577  
578 -
579 579  CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
580 580  
581 581  
582 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
442 +**~1. Keep Status: Status to be monitor**
583 583  
584 584  Keep Status = 1: Monitor Close to Open event
585 585  
... ... @@ -586,7 +586,7 @@
586 586  Keep Status = 0: Monitor Open to Close event
587 587  
588 588  
589 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
449 +**2. Keep Time: Timeout to send an Alarm**
590 590  
591 591  Range 0 ~~ 65535(0xFFFF) seconds.
592 592  
... ... @@ -595,108 +595,84 @@
595 595  If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
596 596  
597 597  
598 -(% style="color:blue" %)**AT Command to configure:**
458 +**AT Command** to configure:
599 599  
600 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
460 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
601 601  
602 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
462 +**AT+TTRIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
603 603  
604 604  
465 +== **2.8 Set debug mode** ==
605 605  
606 -== 2.8  Set debug mode ==
607 -
608 -
609 609  Feature: Enable or Disable debug mode
610 610  
611 -(% style="color:blue" %)**AT Command: AT+DEBUG**
612 612  
470 +**AT Command: AT+DEBUG**
471 +
613 613  [[image:image-20221021111629-21.png]]
614 614  
474 +== **2.9 Clear Flash Record** ==
615 615  
616 -
617 -== 2.9  Clear Flash Record ==
618 -
619 -
620 620  Feature: Clear flash storage for data log feature.
621 621  
622 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
478 +**AT Command: AT+CLRDTA**
623 623  
624 624  [[image:image-20221021111527-19.png]]
625 625  
482 +== ** 2.10 Set trigger mode** ==
626 626  
484 +➢ AT Command: **AT+TTRMOD**
627 627  
628 -== 2.10  Set trigger mode ==
629 -
630 -
631 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
632 -
633 633  Feature: Set the trigger interrupt mode.
634 634  
635 635  [[image:image-20221021111552-20.png]]
636 636  
490 +== **2.11 Set the calculate flag** ==
637 637  
638 -
639 -== 2.11  Set the calculate flag ==
640 -
641 -
642 642  Feature: Set the calculate flag
643 643  
644 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
494 +**AT Command: AT+CALCFLAG**
645 645  
646 646  [[image:image-20221021111711-22.png]]
647 647  
498 +== **2.12 Set count number** ==
648 648  
649 -
650 -== 2.12 Set count number ==
651 -
652 -
653 653  Feature: Manually set the count number
654 654  
655 -(% style="color:blue" %)**AT Command: AT+SETCNT**
502 +**AT Command: AT+SETCNT**
656 656  
657 657  [[image:image-20221021111748-24.png]]
658 658  
506 +== **2.13 Set the number of data to be uploaded and the recording time** ==
659 659  
508 +➢ AT Command:
660 660  
661 -== 2.13  Set the number of data to be uploaded and the recording time ==
510 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
662 662  
663 663  
664 -(% style="color:blue" %)**AT Command:**
513 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
665 665  
666 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
515 +== **2.14 Read or Clear cached data** ==
667 667  
668 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
517 +➢ AT Command:
669 669  
519 +AT+CDP    ~/~/ Read cached data
670 670  
671 -
672 -== 2.14  Read or Clear cached data ==
673 -
674 -
675 -(% style="color:blue" %)**AT Command:**
676 -
677 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
678 -
679 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
680 -
681 681  [[image:image-20221021111810-25.png||height="364" width="797"]]
682 682  
683 683  
524 +AT+CDP=0    ~/~/ Clear cached data ​
684 684  
685 -== 2.15  ​Firmware Change Log ==
526 +== **2.15  ​Firmware Change Log** ==
686 686  
528 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
687 687  
688 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
530 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
689 689  
690 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
532 +== **2.16  ​Battery Analysis** ==
691 691  
534 +=== **2.16.1  ​Battery Type** ===
692 692  
693 -
694 -== 2.16  ​Battery Analysis ==
695 -
696 -
697 -=== 2.16.1  ​Battery Type ===
698 -
699 -
700 700  The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
701 701  
702 702  The battery is designed to last for several years depends on the actual use environment and update interval. 
... ... @@ -704,55 +704,40 @@
704 704  The battery-related documents as below:
705 705  
706 706  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
707 -
708 708  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
709 -
710 710  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
711 711  
712 712  [[image:image-20221021111911-26.png]] ​
713 713  
548 +=== **2.16.2  Power consumption Analyze** ===
714 714  
715 -
716 -=== 2.16.2  Power consumption Analyze ===
717 -
718 -
719 719  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
720 720  
721 721  Instruction to use as below:
722 722  
723 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
554 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
724 724  
725 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
556 +**Step 2: ** Open it and choose
726 726  
727 727  * Product Model
728 -
729 729  * Uplink Interval
730 -
731 731  * Working Mode
732 732  
733 733  And the Life expectation in difference case will be shown on the right.
734 734  
735 -[[image:1666596205057-567.png]] ​
564 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
736 736  
566 +=== **2.16.3  ​Battery Note** ===
737 737  
738 -
739 -=== 2.16.3  ​Battery Note ===
740 -
741 -
742 742  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
743 743  
570 +=== **2.16.4  Replace the battery** ===
744 744  
745 -
746 -=== 2.16.4  Replace the battery ===
747 -
748 -
749 749  The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
750 750  
751 751  
575 += **3. ​ Access NB-IoT Module** =
752 752  
753 -= 3. ​ Access NB-IoT Module =
754 -
755 -
756 756  Users can directly access the AT command set of the NB-IoT module.
757 757  
758 758  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
... ... @@ -759,14 +759,10 @@
759 759  
760 760  [[image:image-20221021112006-28.png]] ​
761 761  
583 += **4.  Using the AT Commands** =
762 762  
585 +== **4.1  Access AT Commands** ==
763 763  
764 -= 4.  Using the AT Commands =
765 -
766 -
767 -== 4.1  Access AT Commands ==
768 -
769 -
770 770  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
771 771  
772 772  AT+<CMD>?  : Help on <CMD>
... ... @@ -777,9 +777,8 @@
777 777  
778 778  AT+<CMD>=?  : Get the value
779 779  
597 +**General Commands**      
780 780  
781 -(% style="color:blue" %)**General Commands**      
782 -
783 783  AT  : Attention       
784 784  
785 785  AT?  : Short Help     
... ... @@ -802,12 +802,15 @@
802 802  
803 803  AT+SERVADDR  : Server Address
804 804  
805 -AT+TR      :  Get or Set record time
621 +AT+TR      : Get or Set record time"
806 806  
623 +
807 807  AT+NOUD      : Get or Set the number of data to be uploaded
808 808  
809 -AT+CDP     :  Read or Clear cached data
810 810  
627 +AT+CDP     : Read or Clear cached data
628 +
629 +
811 811  AT+ DEBUG   : Enable or Disable debug mode
812 812  
813 813  AT+ TTRIG   : Get or Set Alarm Base on Timeout
... ... @@ -818,19 +818,16 @@
818 818  
819 819  AT+ CLRC   : Clear current door open count
820 820  
640 +**COAP Management**      
821 821  
822 -(% style="color:blue" %)**COAP Management**      
823 -
824 824  AT+URI            : Resource parameters
825 825  
644 +**UDP Management**
826 826  
827 -(% style="color:blue" %)**UDP Management**
828 -
829 829  AT+CFM          : Upload confirmation mode (only valid for UDP)
830 830  
648 +**MQTT Management**
831 831  
832 -(% style="color:blue" %)**MQTT Management**
833 -
834 834  AT+CLIENT               : Get or Set MQTT client
835 835  
836 836  AT+UNAME  : Get or Set MQTT Username
... ... @@ -841,71 +841,86 @@
841 841  
842 842  AT+SUBTOPIC  : Get or Set MQTT subscription topic
843 843  
660 +**Information**          
844 844  
845 -(% style="color:blue" %)**Information**          
846 -
847 847  AT+FDR  : Factory Data Reset
848 848  
849 849  AT+PWORD  : Serial Access Password
850 850  
666 += **​5.  FAQ** =
851 851  
668 +== **5.1 ​ How to Upgrade Firmware** ==
852 852  
853 -= ​5.  FAQ =
670 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
854 854  
672 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
855 855  
856 -== 5.1 ​ How to Upgrade Firmware ==
674 +**Notice, **CPN01 **and **CPL01 **share the same mother board. They use the same connection and method to update.**
857 857  
858 858  
859 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
677 += **6.  Trouble Shooting** =
860 860  
861 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
679 +== **6.1  ​Connection problem when uploading firmware** ==
862 862  
863 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
681 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
864 864  
865 865  
684 +== **6.2  AT Command input doesn't work** ==
866 866  
867 -= 6.  Trouble Shooting =
686 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
868 868  
869 869  
870 -== 6.1  ​Connection problem when uploading firmware ==
689 += **7. ​ Order Info** =
871 871  
691 +Part Number**:** CPN01
872 872  
873 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
874 874  
694 += **8.  Packing Info** =
875 875  
696 +**Package Includes**:
876 876  
877 -== 6.2  AT Command input doesn't work ==
698 +* CPN01 Open/Close Sensor x 1
699 +* External antenna x 1
878 878  
701 +**Dimension and weight**:
879 879  
880 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
703 +* Size: 195 x 125 x 55 mm
704 +* Weight:   420g
881 881  
706 += **9.  Support** =
882 882  
708 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
709 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
883 883  
884 -= 7. ​ Order Info =
711 +​
885 885  
886 886  
887 -Part Number**:** CPN01
888 888  
889 889  
890 890  
891 -= 8.  Packing Info =
892 892  
893 893  
894 -(% style="color:blue" %)**Package Includes**:
895 895  
896 -* CPN01 Open/Close Sensor x 1
897 -* External antenna x 1
898 898  
899 -(% style="color:blue" %)**Dimension and weight**:
900 900  
901 -* Size: 195 x 125 x 55 mm
902 -* Weight:   420g
903 903  
904 -= 9.  Support =
905 905  
906 906  
907 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
908 908  
909 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
910 910  
911 -​
727 +
728 +
729 +
730 +
731 +
732 +
733 +
734 +
735 +
736 +
737 +
738 +
739 +
740 +
741 +
742 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0