Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 61.3 >
edited by Xiaoling
on 2022/11/17 16:39
To version < 37.1 >
edited by Edwin Chen
on 2022/10/22 23:46
>
Change comment: Uploaded new attachment "image-20221022234602-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,65 +1,34 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 +{{toc/}}
4 4  
6 += **1. Introduction** =
5 5  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
6 6  
10 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via Nb-IoT network. User can see the (% style="color:blue" %)dry contact status, open time, and open counts(%%) in the IoT Server.
7 7  
12 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
8 8  
14 +CPN01 has (% style="color:blue" %)Open-Alarm feature(%%), user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
9 9  
10 -**Table of Contents：**
16 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
11 11  
18 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
19 +\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
20 +\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
21 +\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
12 12  
23 +​
13 13  
25 +== **​1.2 Features** ==
14 14  
15 -
16 -= 1.  Introduction =
17 -
18 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
19 -
20 -
21 -(((
22 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
23 -)))
24 -
25 -(((
26 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
27 -)))
28 -
29 -(((
30 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
31 -)))
32 -
33 -(((
34 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
35 -)))
36 -
37 -(((
38 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
39 -)))
40 -
41 -(((
42 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
43 -)))
44 -
45 -(((
46 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
47 -)))
48 -
49 -(((
50 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
51 -)))
52 -
53 -
54 -
55 -== ​1.2  Features ==
56 -
57 -
58 58  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
59 59  * Open/Close detect
60 60  * Open/Close statistics
61 61  * Monitor Battery Level
62 -* connect two door sensors
31 +* Uplink on periodically and open/close event
63 63  * Datalog feature
64 64  * Uplink periodically
65 65  * Downlink to change configure
... ... @@ -70,41 +70,14 @@
70 70  * Micro SIM card slot for NB-IoT SIM
71 71  * 8500mAh Battery for long-term use
72 72  
73 -== 1.3  Storage & Operation ==
42 +== **1.3  Specification** ==
74 74  
44 +**Common DC Characteristics:**
75 75  
76 -Temperature -40°C to +85°C
77 -
78 -
79 -== 1.4  Mechanical ==
80 -
81 -
82 -[[image:image-20221117114937-4.png]]
83 -
84 -
85 -[[image:image-20221117114949-5.png]]
86 -
87 -
88 -[[image:image-20221117115010-6.png]]
89 -
90 -
91 -
92 -== 1.5 ​ Applications ==
93 -
94 -
95 -[[image:image-20221117114842-3.png]]
96 -
97 -
98 -
99 -== 1.6  Specification ==
100 -
101 -
102 -(% style="color:blue" %)**Common DC Characteristics:**
103 -
104 104  * Supply Voltage: 2.1v ~~ 3.6v
105 105  * Operating Temperature: -40 ~~ 85°C
106 106  
107 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
108 108  
109 109  * - B1 @H-FDD: 2100MHz
110 110  * - B3 @H-FDD: 1800MHz
... ... @@ -113,224 +113,180 @@
113 113  * - B20 @H-FDD: 800MHz
114 114  * - B28 @H-FDD: 700MHz
115 115  
116 -== 1.7  Pin Definitions and Switch ==
58 +== **1.4 Installation** ==
117 117  
60 +Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
118 118  
119 -[[image:image-20221021110429-4.png]]
62 +[[image:image-20221021110329-1.png]]
120 120  
64 +[[image:image-20221021110340-2.png]]
121 121  
122 -=== 1.7.1  Pin Definition ===
66 +== **1.5 ​Applications** ==
123 123  
68 +* Open/Close Detection
69 +* Pulse meter application
70 +* Dry Contact Detection
124 124  
125 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
72 +== **1.6 Mechanical** ==
126 126  
74 +​[[image:image-20221021110415-3.png]]
127 127  
76 +== ** 1.7 Pin Definitions and Switch** ==
128 128  
129 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
78 +[[image:image-20221021110429-4.png]]
130 130  
80 +=== **1.7.1 Pin Definition** ===
131 131  
132 -Power on Device when putting this jumper.
82 +CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
133 133  
84 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
134 134  
135 135  
136 -=== 1.7.3  BOOT MODE / SW1 ===
87 +Power on Device when putting this jumper.
137 137  
138 138  
139 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
140 140  
141 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
91 +=== **1.7.3 BOOT MODE / SW1** ===
142 142  
143 143  
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
144 144  
145 -=== 1.7.4  Reset Button ===
96 +2) Flash: work mode, the device starts to work and send out console output for further debug
146 146  
147 147  
148 -Press to reboot the device.
149 149  
100 +=== **1.7.4 Reset Button** ===
150 150  
151 151  
152 -=== 1.7.5  LED ===
103 +Press to reboot the device.
153 153  
105 +== ==
154 154  
155 -The LED will blink when :
107 +=== **1.7.5 LED** ===
156 156  
157 -1.  Boot the device in flash mode
158 158  
159 -2.  Send an uplink packet
110 +It will flash:
160 160  
112 +1. Boot the device in flash mode
113 +1. Send an uplink packet
161 161  
115 += **2.  Use CPN01 to communicate with IoT Server** =
162 162  
163 -== 1.8  Magnet Distance ==
117 +== **2.1  How it works** ==
164 164  
119 +The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
165 165  
166 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
121 +The diagram below shows the working flow in default firmware of CPN01:
167 167  
168 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
169 -
170 -
171 -
172 -= 2.  Use CPN01 to communicate with IoT Server =
173 -
174 -== 2.1  How it works ==
175 -
176 -
177 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
178 -
179 -The diagram below shows the working flow in the default firmware of NDS03A:
180 -
181 181  [[image:image-20221021110615-5.png]]
182 182  
125 +== **2.2 ​ Configure the CPN01** ==
183 183  
127 +=== **2.2.1 Test Requirement** ===
184 184  
185 -== 2.2 ​ Configure NDS03A ==
129 +To use CPN01 in your city, make sure meet below requirements:
186 186  
187 -=== 2.2.1 Test Requirement ===
188 -
189 -
190 -To use NDS03A in your city, make sure to meet below requirements:
191 -
192 -* Your local operator has already distributed an NB-IoT Network.
193 -* The local NB-IoT network used the band that NDS03A supports.
131 +* Your local operator has already distributed a NB-IoT Network there.
132 +* The local NB-IoT network used the band that CPN01 supports.
194 194  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
195 195  
196 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
135 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
197 197  
198 -[[image:image-20221117142300-1.png]]
199 -
200 200   ​
201 201  
139 +=== **2.2.2 Insert SIM card** ===
202 202  
203 -=== 2.2.2 Insert NB-IoT SIM card ===
204 -
205 -
206 206  Insert the NB-IoT Card get from your provider.
207 207  
208 -User needs to take out the NB-IoT module and insert the SIM card like below:
143 +User need to take out the NB-IoT module and insert the SIM card like below:
209 209  
210 210  [[image:image-20221021110745-6.png]] ​
211 211  
147 +=== **2.2.3 Connect USB – TTL to CPN01 to configure it** ===
212 212  
149 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
213 213  
214 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
151 +**Connection:**
215 215  
153 + USB TTL GND <~-~-~-~-> GND
216 216  
217 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
155 + USB TTL TXD <~-~-~-~-> UART_RXD
218 218  
219 -(% style="color:blue" %)**Connection:**
157 + USB TTL RXD <~-~-~-~-> UART_TXD
220 220  
221 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
222 -
223 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
224 -
225 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
226 -
227 -
228 228  In the PC, use below serial tool settings:
229 229  
230 -* Baud:  (% style="color:red" %)**9600**
161 +* Baud:  **9600**
162 +* Data bits:** 8**
163 +* Stop bits: **1**
164 +* Parity:  **None**
165 +* Flow Control: **None**
231 231  
232 -* Data bits:** (% style="color:red" %)8(%%)**
167 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
233 233  
234 -* Stop bits: (% style="color:red" %)**1**
235 -
236 -* Parity:  (% style="color:red" %)**None**
237 -
238 -* Flow Control: (% style="color:red" %)**None**
239 -
240 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
241 -
242 242  ​[[image:image-20221021110817-7.png]]
243 243  
244 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
171 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
245 245  
173 +=== **2.2.4 Use CoAP protocol to uplink data** ===
246 246  
247 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
175 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
248 248  
177 +**Use below commands:**
249 249  
179 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
180 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
181 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
250 250  
251 -=== 2.2.4 Use CoAP protocol to uplink data ===
252 -
253 -
254 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
255 -
256 -
257 -(% style="color:blue" %)**Use below commands in CPN01:**
258 -
259 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
260 -
261 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
262 -
263 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
264 -
265 265  For parameter description, please refer to AT command set
266 266  
267 267  [[image:image-20221021110948-8.png]]
268 268  
187 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
269 269  
270 -After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
271 -
272 272  [[image:image-20221021110956-9.png]] ​
273 273  
191 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
274 274  
193 +This feature is supported since firmware version v1.0.1
275 275  
276 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
195 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
196 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
197 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
277 277  
278 -
279 -(% style="color:blue" %)**AT Commands:**
280 -
281 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
282 -
283 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
284 -
285 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
286 -
287 287  ​ [[image:image-20221021111025-10.png]]
288 288  
289 -
290 290  [[image:image-20221021111033-11.png||height="241" width="576"]]
291 291  
292 292  ​
293 293  
205 +=== **2.2.6 Use MQTT protocol to uplink data** ===
294 294  
295 -=== 2.2.6 Use MQTT protocol to uplink data ===
207 +This feature is supported since firmware version v110
296 296  
209 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
210 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
211 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
212 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
213 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
214 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
215 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
297 297  
298 -(% style="color:blue" %)**AT Commands:**
299 -
300 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
301 -
302 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
303 -
304 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
305 -
306 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
307 -
308 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
309 -
310 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
311 -
312 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
313 -
314 314  ​ [[image:image-20221021111058-12.png]]
315 315  
219 +[[image:image-20221021111108-13.png]]
316 316  
317 -[[image:image-20221021111201-16.png||height="472" width="653"]]
318 -
319 319  ​
320 320  
321 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
223 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
322 322  
225 +=== **2.2.7 Use TCP protocol to uplink data** ===
323 323  
227 +This feature is supported since firmware version v110
324 324  
325 -=== 2.2.7 Use TCP protocol to uplink data ===
229 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
230 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
326 326  
327 -
328 -(% style="color:blue" %)**AT Commands:**
329 -
330 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
331 -
332 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
333 -
334 334  ​ [[image:image-20221021111125-14.png]]
335 335  
336 336  [[image:image-20221021111131-15.png]]
... ... @@ -337,121 +337,85 @@
337 337  
338 338  ​
339 339  
238 +=== **2.2.8 Change Update Interval** ===
340 340  
341 -=== 2.2.8 Change Update Interval ===
240 +User can use below command to change the **uplink interval**.
342 342  
242 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
343 343  
344 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
244 +**NOTE:**
345 345  
346 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
246 +**~1. By default, the device will send an uplink message every 1 hour.**
347 347  
348 -(% style="color:red" %)**NOTE:**
248 +== **2.3  Uplink Payload** ==
349 349  
350 -1.  By default, the device will send an uplink message every 4 hour.
250 +In this mode, uplink payload includes 87 bytes in total by default.
351 351  
252 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
352 352  
254 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
255 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
353 353  
354 -== 2.3  Uplink Payload ==
257 +|2|2|4|8 group
258 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
355 355  
260 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
356 356  
357 -The uplink payload includes 26 bytes in total by default.
262 +[[image:image-20221021111201-16.png||height="572" width="792"]]
358 358  
359 -Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
360 -
361 -(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
362 -
363 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
364 -|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
365 -|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
366 -
367 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
368 -|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
369 -**1-32 group**
370 -)))
371 -|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
372 -
373 -
374 -(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
375 -
376 -
377 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
378 -|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
379 -|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
380 -
381 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
382 -|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
383 -|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPN01-%20NB-IoT%20Outdoor%20OpenClose%20Dry%20Contact%20Sensor%C2%A0User%20Manual/#H2.4.7A0ContactStatus]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)Time stamp|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
384 -
385 -(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
386 -|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
387 -**1-32 group**
388 -)))
389 -|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)Time stamp|(% style="width:87px" %)...
390 -
391 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
392 -
393 -[[image:image-20221117145932-2.png]]
394 -
395 -
396 396  The payload is ASCII string, representative same HEX:
397 397  
398 -**0x **f867787050213317  0064  0ccf 19 01 00 00 000016 000017 637590df
266 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
399 399  
400 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
268 +where:
269 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
401 401  
402 -**where:**
271 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
403 403  
404 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
273 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
405 405  
406 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
275 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
407 407  
408 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
277 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
409 409  
410 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
279 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00= 0
411 411  
412 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
281 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00= 0
413 413  
414 -* (% style="color:#037691" %)**Door Status:**(%%) 0x00=0
283 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
415 415  
416 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
285 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
417 417  
418 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
287 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
419 419  
420 -* (% style="color:#037691" %)**last open time: **(%%)0x000017 =23
289 +*(% style="color:#037691" %)**Time stamp :**(%%) 0x6315537b =1662342011
421 421  
422 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
291 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000b0200002663510fed
423 423  
293 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
424 424  
425 -== 2.4  Payload Explanation and Sensor Interface ==
295 +== **2.4  Payload Explanation and Sensor Interface** ==
426 426  
297 +=== **2.4.1  Device ID** ===
427 427  
428 -=== 2.4.1  Device ID ===
299 +By default, the Device ID equal to the last 15 bits of IMEI.
429 429  
301 +User can use **AT+DEUI** to set Device ID
430 430  
431 -By default, the Device ID is equal to the last 15 bits of IMEI.
432 -
433 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
434 -
435 435  **Example:**
436 436  
437 437  AT+DEUI=868411056754138
438 438  
439 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
307 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
440 440  
309 +=== **2.4.2  Version Info** ===
441 441  
311 +Specify the software version: 0x64=100, means firmware version 1.00.
442 442  
443 -=== 2.4.2  Version Info ===
313 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
444 444  
315 +=== **2.4.3  Battery Info** ===
445 445  
446 -Specify the software version: 0x64=100, which means firmware version 1.00.
447 -
448 -For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
449 -
450 -
451 -
452 -=== 2.4.3  Battery Info ===
453 -
454 -
455 455  Check the battery voltage for CPN01.
456 456  
457 457  Ex1: 0x0B45 = 2885mV
... ... @@ -458,11 +458,8 @@
458 458  
459 459  Ex2: 0x0B49 = 2889mV
460 460  
323 +=== **2.4.4  Signal Strength** ===
461 461  
462 -
463 -=== 2.4.4  Signal Strength ===
464 -
465 -
466 466  NB-IoT Network signal Strength.
467 467  
468 468  **Ex1: 0x1d = 29**
... ... @@ -477,13 +477,10 @@
477 477  
478 478  **99**    Not known or not detectable
479 479  
339 +=== **2.4.5 Calculate Flag** ===
480 480  
341 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
481 481  
482 -=== 2.4.5  Calculate Flag ===
483 -
484 -
485 -The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
486 -
487 487  User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
488 488  
489 489  Default value: 0. 
... ... @@ -490,36 +490,24 @@
490 490  
491 491  Range (6 bits): (b)000000 ~~ (b) 111111
492 492  
349 +=== **2.4.6  Alarm** ===
493 493  
351 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
494 494  
495 -=== 2.4.6  Alarm ===
353 +=== **2.4.7 Contact Status** ===
496 496  
497 -
498 -See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
499 -
500 -
501 -
502 -=== 2.4.7  Contact Status ===
503 -
504 -
505 505  0: Open
506 506  
507 507  1: Close
508 508  
359 +=== **2.4.8 Total pulse** ===
509 509  
361 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
510 510  
511 -=== 2.4.8  Total pulse ===
512 -
513 -
514 -Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
515 -
516 516  Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
517 517  
365 +=== **2.4.9 The last open duration** ===
518 518  
519 -
520 -=== 2.4.9  The last open duration ===
521 -
522 -
523 523  Dry Contact last open duration.
524 524  
525 525  Unit: min.
... ... @@ -527,28 +527,23 @@
527 527  [[image:image-20221021111346-17.png||height="146" width="770"]]
528 528  
529 529  
374 +=== **2.4.10  Timestamp** ===
530 530  
531 -=== 2.4.10  Timestamp ===
376 +Time stamp : 0x6315537b =1662342011
532 532  
533 -
534 -Timestamp : 0x6315537b =1662342011
535 -
536 536  Convert Unix timestamp to time 2022-9-5 9:40:11.
537 537  
538 538  **~ **
539 539  
382 +== **2.5  Downlink Payload** ==
540 540  
541 -== 2.5  Downlink Payload ==
542 -
543 -
544 544  By default, CPN01 prints the downlink payload to console port.
545 545  
546 546  [[image:image-20221021111414-18.png]] ​
547 547  
548 -
549 549  **Examples:**
550 550  
551 -* (% style="color:#037691" %)**Set TDC**
390 +* **Set TDC**
552 552  
553 553  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
554 554  
... ... @@ -556,39 +556,36 @@
556 556  
557 557  Payload:    01 00 00 3C    TDC=60S
558 558  
559 -* (% style="color:#037691" %)**Reset**
398 +* **Reset**
560 560  
561 561  If payload = 0x04FF, it will reset the NSE01
562 562  
563 -* (% style="color:#037691" %)**INTMOD**
402 +* **INTMOD**
564 564  
565 565  Downlink Payload: 06000003, Set AT+INTMOD=3
566 566  
406 +== **2.6  ​LED Indicator** ==
567 567  
408 +The CPN01 has an internal LED which is to show the status of different state.
568 568  
569 -== 2.6  ​LED Indicator ==
570 -
571 -
572 -The CPN01 has an internal LED which is to show the status of different states.
573 -
574 -* When the device starts normally, the LED will light up for 1 second.
410 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
411 +* Then the LED will be on for 1 second means device is boot normally.
575 575  * After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
576 576  * For each uplink probe, LED will be on for 500ms.
577 577  
578 -== 2.7  Alarm Base on Timeout ==
415 +== **2.7  Alarm Base on Timeout** ==
579 579  
417 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
580 580  
581 -CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
582 582  
420 +**~1. Keep Status: Status to be monitor**
583 583  
584 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
585 -
586 586  Keep Status = 1: Monitor Close to Open event
587 587  
588 588  Keep Status = 0: Monitor Open to Close event
589 589  
590 590  
591 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
427 +**2. Keep Time: Timeout to send an Alarm**
592 592  
593 593  Range 0 ~~ 65535(0xFFFF) seconds.
594 594  
... ... @@ -597,164 +597,123 @@
597 597  If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
598 598  
599 599  
600 -(% style="color:blue" %)**AT Command to configure:**
436 +**AT Command** to configure:
601 601  
602 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
438 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
603 603  
604 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
440 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
605 605  
442 +== **2.8 Set debug mode** ==
606 606  
607 -
608 -== 2.8  Set debug mode ==
609 -
610 -
611 611  Feature: Enable or Disable debug mode
612 612  
613 -(% style="color:blue" %)**AT Command: AT+DEBUG**
614 614  
447 +**AT Command: AT+DEBUG**
448 +
615 615  [[image:image-20221021111629-21.png]]
616 616  
451 +== **2.9 Clear Flash Record** ==
617 617  
618 -
619 -== 2.9  Clear Flash Record ==
620 -
621 -
622 622  Feature: Clear flash storage for data log feature.
623 623  
624 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
455 +**AT Command: AT+CLRDTA**
625 625  
626 626  [[image:image-20221021111527-19.png]]
627 627  
459 +== ** 2.10 Set trigger mode** ==
628 628  
461 +➢ AT Command: **AT+TTRMOD**
629 629  
630 -== 2.10  Set trigger mode ==
631 -
632 -
633 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
634 -
635 635  Feature: Set the trigger interrupt mode.
636 636  
637 637  [[image:image-20221021111552-20.png]]
638 638  
467 +== **2.11 Set the calculate flag** ==
639 639  
640 -
641 -== 2.11  Set the calculate flag ==
642 -
643 -
644 644  Feature: Set the calculate flag
645 645  
646 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
471 +**AT Command: AT+CALCFLAG**
647 647  
648 648  [[image:image-20221021111711-22.png]]
649 649  
475 +== **2.12 Set count number** ==
650 650  
651 -
652 -== 2.12 Set count number ==
653 -
654 -
655 655  Feature: Manually set the count number
656 656  
657 -(% style="color:blue" %)**AT Command: AT+SETCNT**
479 +**AT Command: AT+SETCNT**
658 658  
659 659  [[image:image-20221021111748-24.png]]
660 660  
483 +== **2.13 Set the number of data to be uploaded and the recording time** ==
661 661  
485 +➢ AT Command:
662 662  
663 -== 2.13  Set the number of data to be uploaded and the recording time ==
487 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
664 664  
665 665  
666 -(% style="color:blue" %)**AT Command:**
490 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
667 667  
668 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
492 +== **2.14 Read or Clear cached data** ==
669 669  
670 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
494 +➢ AT Command:
671 671  
496 +AT+CDP    ~/~/ Read cached data
672 672  
673 -
674 -== 2.14  Read or Clear cached data ==
675 -
676 -
677 -(% style="color:blue" %)**AT Command:**
678 -
679 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
680 -
681 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
682 -
683 683  [[image:image-20221021111810-25.png||height="364" width="797"]]
684 684  
685 685  
501 +AT+CDP=0    ~/~/ Clear cached data ​
686 686  
687 -== 2.15  ​Firmware Change Log ==
503 +== **2.15  ​Firmware Change Log** ==
688 688  
505 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
689 689  
690 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
507 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
691 691  
692 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
509 +== **2.16  ​Battery Analysis** ==
693 693  
511 +=== **2.16.1  ​Battery Type** ===
694 694  
513 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
695 695  
696 -== 2.16  ​Battery Analysis ==
515 +The battery is designed to last for several years depends on the actually use environment and update interval. 
697 697  
517 +The battery related documents as below:
698 698  
699 -=== 2.16.1  ​Battery Type ===
700 -
701 -
702 -The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
703 -
704 -The battery is designed to last for several years depends on the actual use environment and update interval. 
705 -
706 -The battery-related documents as below:
707 -
708 708  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
709 -
710 710  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
711 -
712 712  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
713 713  
714 714  [[image:image-20221021111911-26.png]] ​
715 715  
525 +=== **2.16.2  Power consumption Analyze** ===
716 716  
717 -
718 -=== 2.16.2  Power consumption Analyze ===
719 -
720 -
721 721  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
722 722  
723 723  Instruction to use as below:
724 724  
725 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
531 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
726 726  
727 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
533 +**Step 2: ** Open it and choose
728 728  
729 729  * Product Model
730 -
731 731  * Uplink Interval
732 -
733 733  * Working Mode
734 734  
735 735  And the Life expectation in difference case will be shown on the right.
736 736  
737 -[[image:1666596205057-567.png]] ​
541 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
738 738  
543 +=== **2.16.3  ​Battery Note** ===
739 739  
740 -
741 -=== 2.16.3  ​Battery Note ===
742 -
743 -
744 744  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
745 745  
547 +=== **2.16.4  Replace the battery** ===
746 746  
747 -
748 -=== 2.16.4  Replace the battery ===
749 -
750 -
751 751  The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
752 752  
551 += **3. ​ Access NB-IoT Module** =
753 753  
754 -
755 -= 3. ​ Access NB-IoT Module =
756 -
757 -
758 758  Users can directly access the AT command set of the NB-IoT module.
759 759  
760 760  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
... ... @@ -761,14 +761,10 @@
761 761  
762 762  [[image:image-20221021112006-28.png]] ​
763 763  
559 += **4.  Using the AT Commands** =
764 764  
561 +== **4.1  Access AT Commands** ==
765 765  
766 -= 4.  Using the AT Commands =
767 -
768 -
769 -== 4.1  Access AT Commands ==
770 -
771 -
772 772  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
773 773  
774 774  AT+<CMD>?  : Help on <CMD>
... ... @@ -779,9 +779,8 @@
779 779  
780 780  AT+<CMD>=?  : Get the value
781 781  
573 +**General Commands**      
782 782  
783 -(% style="color:blue" %)**General Commands**      
784 -
785 785  AT  : Attention       
786 786  
787 787  AT?  : Short Help     
... ... @@ -804,12 +804,15 @@
804 804  
805 805  AT+SERVADDR  : Server Address
806 806  
807 -AT+TR      :  Get or Set record time
597 +AT+TR      : Get or Set record time"
808 808  
599 +
809 809  AT+NOUD      : Get or Set the number of data to be uploaded
810 810  
811 -AT+CDP     :  Read or Clear cached data
812 812  
603 +AT+CDP     : Read or Clear cached data
604 +
605 +
813 813  AT+ DEBUG   : Enable or Disable debug mode
814 814  
815 815  AT+ TTRIG   : Get or Set Alarm Base on Timeout
... ... @@ -820,19 +820,16 @@
820 820  
821 821  AT+ CLRC   : Clear current door open count
822 822  
616 +**COAP Management**      
823 823  
824 -(% style="color:blue" %)**COAP Management**      
825 -
826 826  AT+URI            : Resource parameters
827 827  
620 +**UDP Management**
828 828  
829 -(% style="color:blue" %)**UDP Management**
830 -
831 831  AT+CFM          : Upload confirmation mode (only valid for UDP)
832 832  
624 +**MQTT Management**
833 833  
834 -(% style="color:blue" %)**MQTT Management**
835 -
836 836  AT+CLIENT               : Get or Set MQTT client
837 837  
838 838  AT+UNAME  : Get or Set MQTT Username
... ... @@ -843,71 +843,86 @@
843 843  
844 844  AT+SUBTOPIC  : Get or Set MQTT subscription topic
845 845  
636 +**Information**          
846 846  
847 -(% style="color:blue" %)**Information**          
848 -
849 849  AT+FDR  : Factory Data Reset
850 850  
851 851  AT+PWORD  : Serial Access Password
852 852  
642 += **​5.  FAQ** =
853 853  
644 +== **5.1 ​ How to Upgrade Firmware** ==
854 854  
855 -= ​5.  FAQ =
646 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
856 856  
648 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
857 857  
858 -== 5.1 ​ How to Upgrade Firmware ==
650 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
859 859  
652 +== **5.2  Can I calibrate CPN01 to different soil types?** ==
860 860  
861 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
654 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
862 862  
863 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
656 += **6.  Trouble Shooting** =
864 864  
865 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
658 +== **6.1  ​Connection problem when uploading firmware** ==
866 866  
660 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
867 867  
662 +== **6.2  AT Command input doesn't work** ==
868 868  
869 -= 6.  Trouble Shooting =
664 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
870 870  
666 += **7. ​ Order Info** =
871 871  
872 -== 6.1  ​Connection problem when uploading firmware ==
668 +Part Number**:** CPN01
873 873  
670 += **8.  Packing Info** =
874 874  
875 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
672 +**Package Includes**:
876 876  
674 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
675 +* External antenna x 1
877 877  
677 +**Dimension and weight**:
878 878  
879 -== 6.2  AT Command input doesn't work ==
679 +* Size: 195 x 125 x 55 mm
680 +* Weight:   420g
880 880  
682 += **9.  Support** =
881 881  
882 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
684 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
685 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
883 883  
687 +​
884 884  
885 885  
886 -= 7. ​ Order Info =
887 887  
888 888  
889 -Part Number**:** CPN01
890 890  
891 891  
892 892  
893 -= 8.  Packing Info =
894 894  
895 895  
896 -(% style="color:blue" %)**Package Includes**:
897 897  
898 -* CPN01 Open/Close Sensor x 1
899 -* External antenna x 1
900 900  
901 -(% style="color:blue" %)**Dimension and weight**:
902 902  
903 -* Size: 195 x 125 x 55 mm
904 -* Weight:   420g
905 905  
906 -= 9.  Support =
907 907  
908 908  
909 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
910 910  
911 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
912 912  
913 -​
705 +
706 +
707 +
708 +
709 +
710 +
711 +
712 +
713 +
714 +
715 +
716 +
717 +
718 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0