Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 61.2 >
edited by Xiaoling
on 2022/11/17 15:08
To version < 66.2 >
edited by Xiaoling
on 2022/11/18 09:43
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -70,7 +70,6 @@
70 70  * Micro SIM card slot for NB-IoT SIM
71 71  * 8500mAh Battery for long-term use
72 72  
73 -
74 74  == 1.3  Storage & Operation ==
75 75  
76 76  
... ... @@ -114,7 +114,6 @@
114 114  * - B20 @H-FDD: 800MHz
115 115  * - B28 @H-FDD: 700MHz
116 116  
117 -
118 118  == 1.7  Pin Definitions and Switch ==
119 119  
120 120  
... ... @@ -356,19 +356,39 @@
356 356  == 2.3  Uplink Payload ==
357 357  
358 358  
359 -The uplink payload includes 123 bytes in total by default.
357 +The uplink payload includes 26 bytes in total by default.
360 360  
361 -Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
359 +Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
362 362  
361 +(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
363 363  
364 -(% border="1.5" style="background-color:#ffffcc; color:green; width:510px" %)
365 -|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:40px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:60px" %)**3**
366 -|=(% style="width: 96px;" %)**Value**|(% style="width:84px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:44px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:121px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:52px" %)MOD|(% style="width:84px" %)[[ Calculate Flag>>||anchor="H2.4.5A0CalculateFlag"]]|(% style="width:116px" %)[[Contact Status>>||anchor="H2.4.7A0ContactStatus"]]|(% style="width:57px" %)[[Alarm>>||anchor="H2.4.6A0Alarm"]]|(% style="width:91px" %)[[Total pulse>>||anchor="H2.4.8A0Totalpulse"]]
363 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
364 +|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
365 +|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
367 367  
368 368  (% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
369 -|(% style="width:100px" %)**3**|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:100px" %)**3**|(% style="width:80px" %)4|(% style="width:50px" %)**8 group**
370 -|(% style="width:176px" %)[[The last open duration>>||anchor="H2.4.9A0Thelastopenduration"]]|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Contact Status|(% style="width:92px" %)Total pulse|(% style="width:169px" %)The last open duration|(% style="width:97px" %)Time stamp|(% style="width:74px" %)...
368 +|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
369 +**1-32 group**
370 +)))
371 +|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
371 371  
373 +(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
374 +
375 +
376 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
377 +|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
378 +|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
379 +
380 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
381 +|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
382 +|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPN01-%20NB-IoT%20Outdoor%20OpenClose%20Dry%20Contact%20Sensor%C2%A0User%20Manual/#H2.4.7A0ContactStatus]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)Time stamp|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
383 +
384 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
385 +|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
386 +**1-32 group**
387 +)))
388 +|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)Time stamp|(% style="width:87px" %)...
389 +
372 372  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
373 373  
374 374  [[image:image-20221117145932-2.png]]
... ... @@ -376,8 +376,6 @@
376 376  
377 377  The payload is ASCII string, representative same HEX:
378 378  
379 -**0x **f867787050213317  0064  0ccf 19 01 00 00 000016 000017 637590df
380 -
381 381  **0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
382 382  
383 383  **where:**
... ... @@ -402,8 +402,6 @@
402 402  
403 403  * (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
404 404  
405 -
406 -
407 407  == 2.4  Payload Explanation and Sensor Interface ==
408 408  
409 409  
... ... @@ -421,20 +421,18 @@
421 421  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
422 422  
423 423  
424 -
425 425  === 2.4.2  Version Info ===
426 426  
427 427  
428 428  Specify the software version: 0x64=100, which means firmware version 1.00.
429 429  
430 -For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
443 +For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
431 431  
432 432  
433 -
434 434  === 2.4.3  Battery Info ===
435 435  
436 436  
437 -Check the battery voltage for CPN01.
449 +Check the battery voltage for NDS03A.
438 438  
439 439  Ex1: 0x0B45 = 2885mV
440 440  
... ... @@ -441,7 +441,6 @@
441 441  Ex2: 0x0B49 = 2889mV
442 442  
443 443  
444 -
445 445  === 2.4.4  Signal Strength ===
446 446  
447 447  
... ... @@ -460,70 +460,39 @@
460 460  **99**    Not known or not detectable
461 461  
462 462  
474 +=== 2.4.5  Disalarm: (default: 0) ===
463 463  
464 -=== 2.4.5  Calculate Flag ===
465 465  
477 +(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
466 466  
467 -The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
479 +(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
468 468  
469 -User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
481 + (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
470 470  
471 -Default value: 0. 
472 472  
473 -Range (6 bits): (b)000000 ~~ (b) 111111
484 +=== 2.4.6  Keep Status & Keep Time ===
474 474  
475 475  
487 +Shows the configure value of Alarm Base on Timeout Feature
476 476  
477 -=== 2.4.6  Alarm ===
478 478  
490 +=== 2.4.7  Timestamp ===
479 479  
480 -See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
481 481  
493 +Timestamp : 0x6315537b =1662342011
482 482  
483 483  
484 -=== 2.4.7  Contact Status ===
485 485  
497 +=== 2.4.8  Switch Dual Channel Mode ===
486 486  
487 -0: Open
488 488  
489 -1: Close
500 +NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
490 490  
491 491  
492 -
493 -=== 2.4.8  Total pulse ===
494 -
495 -
496 -Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
497 -
498 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
499 -
500 -
501 -
502 -=== 2.4.9  The last open duration ===
503 -
504 -
505 -Dry Contact last open duration.
506 -
507 -Unit: min.
508 -
509 -[[image:image-20221021111346-17.png||height="146" width="770"]]
510 -
511 -
512 -
513 -=== 2.4.10  Timestamp ===
514 -
515 -
516 -Timestamp : 0x6315537b =1662342011
517 -
518 -Convert Unix timestamp to time 2022-9-5 9:40:11.
519 -
520 -**~ **
521 -
522 -
523 523  == 2.5  Downlink Payload ==
524 524  
525 525  
526 -By default, CPN01 prints the downlink payload to console port.
506 +By default, NDS03A prints the downlink payload to console port.
527 527  
528 528  [[image:image-20221021111414-18.png]] ​
529 529  
... ... @@ -540,7 +540,7 @@
540 540  
541 541  * (% style="color:#037691" %)**Reset**
542 542  
543 -If payload = 0x04FF, it will reset the NSE01
523 +If payload = 0x04FF, it will reset the NDS03A
544 544  
545 545  * (% style="color:#037691" %)**INTMOD**
546 546  
... ... @@ -551,16 +551,17 @@
551 551  == 2.6  ​LED Indicator ==
552 552  
553 553  
554 -The CPN01 has an internal LED which is to show the status of different states.
534 +The NDS03A has an internal LED which is to show the status of different states.
555 555  
556 556  * When the device starts normally, the LED will light up for 1 second.
557 557  * After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
558 558  * For each uplink probe, LED will be on for 500ms.
559 559  
540 +
560 560  == 2.7  Alarm Base on Timeout ==
561 561  
562 562  
563 -CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
544 +NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
564 564  
565 565  
566 566  (% style="color:blue" %)**1. Keep Status: Status to be monitor**
... ... @@ -576,17 +576,25 @@
576 576  
577 577  If keep time = 0, Disable Alarm Base on Timeout feature.
578 578  
579 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
560 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
580 580  
581 581  
582 582  (% style="color:blue" %)**AT Command to configure:**
583 583  
565 +(% style="color:blue" %)**PB14 PIN:**
566 +
584 584  (% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
585 585  
586 586  (% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
587 587  
588 588  
572 +(% style="color:blue" %)**PB15 PIN:**
589 589  
574 +(% style="color:#037691" %)**AT+TTRIG2=1,30**
575 +
576 +(% style="color:#037691" %)**AT+TTRIG2=0,0 **
577 +
578 +
590 590  == 2.8  Set debug mode ==
591 591  
592 592  
... ... @@ -609,64 +609,73 @@
609 609  
610 610  
611 611  
612 -== 2.10  Set trigger mode ==
601 +== 2.10  Count Mod ==
613 613  
614 614  
615 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
604 +(% style="color:blue" %)**AT Command: AT+COUNTMOD**
616 616  
617 -Feature: Set the trigger interrupt mode.
606 +[[image:image-20221118092935-1.png]]
618 618  
619 -[[image:image-20221021111552-20.png]]
620 620  
621 621  
610 +== 2.11  Interrupt Pin Channel Mod ==
622 622  
623 -== 2.11  Set the calculate flag ==
624 624  
613 +(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
625 625  
626 -Feature: Set the calculate flag
615 +[[image:image-20221118093144-2.png]]
627 627  
628 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
629 629  
630 -[[image:image-20221021111711-22.png]]
631 631  
619 +== 2.12 TTRIG1/2 timeout status alarm ==
632 632  
633 633  
634 -== 2.12 Set count number ==
622 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
635 635  
624 +(% style="color:blue" %)**AT Command: AT+TTRALARM**
636 636  
637 -Feature: Manually set the count number
626 +[[image:image-20221118093512-3.png]]
638 638  
639 -(% style="color:blue" %)**AT Command: AT+SETCNT**
640 640  
641 -[[image:image-20221021111748-24.png]]
642 642  
630 +== 2.13  Select counting mode ==
643 643  
644 644  
645 -== 2.13  Set the number of data to be uploaded and the recording time ==
633 +(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
646 646  
635 +When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
647 647  
648 -(% style="color:blue" %)**AT Command:**
637 +When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
649 649  
650 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
639 +[[image:image-20221118093658-4.png]]
651 651  
652 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
653 653  
654 654  
655 655  
656 -== 2.14  Read or Clear cached data ==
644 +== 2.14  Set the number of data to be uploaded and the recording time ==
657 657  
658 658  
659 659  (% style="color:blue" %)**AT Command:**
660 660  
649 +(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
650 +
651 +(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
652 +
653 +
654 +== 2.15  Read or Clear cached data ==
655 +
656 +
657 +(% style="color:blue" %)**AT Command:**
658 +
661 661  (% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
662 662  
663 663  (% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
664 664  
665 -[[image:image-20221021111810-25.png||height="364" width="797"]]
663 +[[image:image-20221118094227-5.png]]
666 666  
667 667  
668 668  
669 -== 2.15  ​Firmware Change Log ==
667 +== 2.16  ​Firmware Change Log ==
670 670  
671 671  
672 672  Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
image-20221118092935-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0