Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 61.2 >
edited by Xiaoling
on 2022/11/17 15:08
To version < 30.1 >
edited by David Huang
on 2022/10/21 11:20
>
Change comment: Uploaded new attachment "image-20221021112006-28.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,67 +1,36 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png"]]
3 3  
4 4  
5 +**~1. Introduction**
5 5  
7 +**1.1 ​**What is CPN01 **NB-IOT** Pulse/Contact Sensor
6 6  
9 +The Dragino CPL01 is a **NB-IOT Contact Sensor**. It detects open/close status and uplink to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
7 7  
11 +The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
8 8  
13 +CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open for a certain time.
9 9  
10 -**Table of Contents：**
15 +CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
11 11  
17 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
18 +\\CPN01 supports different uplink methods include **TCP,MQTT,UDP and CoAP  **for different application requirement.
19 +\\CPN01 is powered by  **8500mAh Li-SOCI2 battery**, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
20 +\\To use CPN01, user needs to check if there is NB-IoT coverage in local area and with the bands CPN01 supports. If the local operate support it, user needs to get a **NB-IoT SIM card** from local operator and install CPN01 to get NB-IoT network connection
12 12  
22 +​
13 13  
14 14  
25 +**​1.2 Features**
15 15  
16 -= 1.  Introduction =
17 -
18 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
19 -
20 -
21 -(((
22 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
23 -)))
24 -
25 -(((
26 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
27 -)))
28 -
29 -(((
30 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
31 -)))
32 -
33 -(((
34 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
35 -)))
36 -
37 -(((
38 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
39 -)))
40 -
41 -(((
42 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
43 -)))
44 -
45 -(((
46 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
47 -)))
48 -
49 -(((
50 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
51 -)))
52 -
53 -
54 -
55 -== ​1.2  Features ==
56 -
57 -
58 58  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
59 59  * Open/Close detect
60 60  * Open/Close statistics
61 61  * Monitor Battery Level
62 -* connect two door sensors
31 +* Uplink on periodically and open/close event
63 63  * Datalog feature
64 -* Uplink periodically
33 +* Uplink on periodically
65 65  * Downlink to change configure
66 66  * Wall Mountable
67 67  * Outdoor Use
... ... @@ -68,44 +68,16 @@
68 68  * Ultra-Low Power consumption
69 69  * AT Commands to change parameters
70 70  * Micro SIM card slot for NB-IoT SIM
71 -* 8500mAh Battery for long-term use
40 +* 8500mAh Battery for long term use
72 72  
42 +**1.3  Specification**
73 73  
74 -== 1.3  Storage & Operation ==
44 +**Common DC Characteristics:**
75 75  
76 -
77 -Temperature -40°C to +85°C
78 -
79 -
80 -== 1.4  Mechanical ==
81 -
82 -
83 -[[image:image-20221117114937-4.png]]
84 -
85 -
86 -[[image:image-20221117114949-5.png]]
87 -
88 -
89 -[[image:image-20221117115010-6.png]]
90 -
91 -
92 -
93 -== 1.5 ​ Applications ==
94 -
95 -
96 -[[image:image-20221117114842-3.png]]
97 -
98 -
99 -
100 -== 1.6  Specification ==
101 -
102 -
103 -(% style="color:blue" %)**Common DC Characteristics:**
104 -
105 105  * Supply Voltage: 2.1v ~~ 3.6v
106 106  * Operating Temperature: -40 ~~ 85°C
107 107  
108 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
109 109  
110 110  * - B1 @H-FDD: 2100MHz
111 111  * - B3 @H-FDD: 1800MHz
... ... @@ -114,37 +114,47 @@
114 114  * - B20 @H-FDD: 800MHz
115 115  * - B28 @H-FDD: 700MHz
116 116  
58 +**1.4 Installation**
117 117  
118 -== 1.7  Pin Definitions and Switch ==
60 +Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
119 119  
62 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png]] [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image002.png]] ​
120 120  
121 -[[image:image-20221021110429-4.png]]
64 +**1.5 ​Applications**
122 122  
66 +* Open/Close Detection
67 +* Pulse meter application
68 +* Dry Contact Detection
123 123  
124 -=== 1.7.1  Pin Definition ===
70 +**1.6 Mechanical**
125 125  
72 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image003.png]]
126 126  
127 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
74 +**~ 1.7 Pin Definitions and Switch**
128 128  
76 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image004.png]]
129 129  
78 +**1.7.1 Pin Definition**
130 130  
131 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
80 +CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
132 132  
82 +**1.7.2 Jumper JP2(Power ON/OFF)**
133 133  
84 +
134 134  Power on Device when putting this jumper.
135 135  
136 136  
137 137  
138 -=== 1.7.3  BOOT MODE / SW1 ===
89 +**1.7.3 BOOT MODE / SW1**
139 139  
140 140  
141 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
92 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
142 142  
143 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
94 +2) Flash: work mode, the device starts to work and send out console output for further debug
144 144  
145 145  
146 146  
147 -=== 1.7.4  Reset Button ===
98 +**1.7.4 Reset Button**
148 148  
149 149  
150 150  Press to reboot the device.
... ... @@ -151,289 +151,206 @@
151 151  
152 152  
153 153  
154 -=== 1.7.5  LED ===
105 +**1.7.5 LED**
155 155  
156 156  
157 -The LED will blink when :
108 +It will flash:
158 158  
159 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
160 160  
161 -2.  Send an uplink packet
162 162  
114 +**2.  Use CPN01 to communicate with IoT Server**
163 163  
116 +**2.1  How it works**
164 164  
165 -== 1.8  Magnet Distance ==
118 +The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
166 166  
120 +The diagram below shows the working flow in default firmware of CPN01:
167 167  
168 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
122 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image005.png||alt="说明: image-20220708101605-2.png"]]
169 169  
170 -(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
124 +**2.2 ​ Configure the CPN01**
171 171  
126 +**2.2.1 Test Requirement**
172 172  
128 +To use CPN01 in your city, make sure meet below requirements:
173 173  
174 -= 2.  Use CPN01 to communicate with IoT Server =
175 -
176 -== 2.1  How it works ==
177 -
178 -
179 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
180 -
181 -The diagram below shows the working flow in the default firmware of NDS03A:
182 -
183 -[[image:image-20221021110615-5.png]]
184 -
185 -
186 -
187 -== 2.2 ​ Configure NDS03A ==
188 -
189 -=== 2.2.1 Test Requirement ===
190 -
191 -
192 -To use NDS03A in your city, make sure to meet below requirements:
193 -
194 -* Your local operator has already distributed an NB-IoT Network.
195 -* The local NB-IoT network used the band that NDS03A supports.
130 +* Your local operator has already distributed a NB-IoT Network there.
131 +* The local NB-IoT network used the band that CPN01 supports.
196 196  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
197 197  
198 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
199 199  
200 -[[image:image-20221117142300-1.png]]
201 -
202 202   ​
203 203  
138 +**2.2.2 Insert SIM card**
204 204  
205 -=== 2.2.2 Insert NB-IoT SIM card ===
206 -
207 -
208 208  Insert the NB-IoT Card get from your provider.
209 209  
210 -User needs to take out the NB-IoT module and insert the SIM card like below:
142 +User need to take out the NB-IoT module and insert the SIM card like below:
211 211  
212 -[[image:image-20221021110745-6.png]] ​
144 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image006.png||alt="说明: 1657249468462-536.png"]] ​
213 213  
146 +**2.2.3 Connect USB – TTL to CPN01 to configure it**
214 214  
148 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
215 215  
216 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
150 +**Connection:**
217 217  
152 + USB TTL GND <~-~-~-~-> GND
218 218  
219 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
154 + USB TTL TXD <~-~-~-~-> UART_RXD
220 220  
221 -(% style="color:blue" %)**Connection:**
156 + USB TTL RXD <~-~-~-~-> UART_TXD
222 222  
223 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
224 -
225 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
226 -
227 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
228 -
229 -
230 230  In the PC, use below serial tool settings:
231 231  
232 -* Baud:  (% style="color:red" %)**9600**
160 +* Baud:  **9600**
161 +* Data bits:** 8**
162 +* Stop bits: **1**
163 +* Parity:  **None**
164 +* Flow Control: **None**
233 233  
234 -* Data bits:** (% style="color:red" %)8(%%)**
166 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
235 235  
236 -* Stop bits: (% style="color:red" %)**1**
168 +​[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image007.png]]
237 237  
238 -* Parity:  (% style="color:red" %)**None**
170 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
239 239  
240 -* Flow Control: (% style="color:red" %)**None**
172 +**2.2.4 Use CoAP protocol to uplink data**
241 241  
242 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
174 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
243 243  
244 -​[[image:image-20221021110817-7.png]]
176 +**Use below commands:**
245 245  
246 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
178 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
179 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
180 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
247 247  
248 -
249 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
250 -
251 -
252 -
253 -=== 2.2.4 Use CoAP protocol to uplink data ===
254 -
255 -
256 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
257 -
258 -
259 -(% style="color:blue" %)**Use below commands in CPN01:**
260 -
261 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
262 -
263 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
264 -
265 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
266 -
267 267  For parameter description, please refer to AT command set
268 268  
269 -[[image:image-20221021110948-8.png]]
184 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image008.png]]
270 270  
186 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
271 271  
272 -After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
188 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image009.png]] ​
273 273  
274 -[[image:image-20221021110956-9.png]] ​
190 +**2.2.5 Use UDP protocol to uplink data(Default protocol)**
275 275  
192 +This feature is supported since firmware version v1.0.1
276 276  
194 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
195 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
196 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
277 277  
278 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
198 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image010.png]]
279 279  
200 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image011.png||alt="说明: 1657249930215-289.png"]]
280 280  
281 -(% style="color:blue" %)**AT Commands:**
282 -
283 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
284 -
285 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
286 -
287 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
288 -
289 -​ [[image:image-20221021111025-10.png]]
290 -
291 -
292 -[[image:image-20221021111033-11.png||height="241" width="576"]]
293 -
294 294  ​
295 295  
204 +**2.2.6 Use MQTT protocol to uplink data**
296 296  
297 -=== 2.2.6 Use MQTT protocol to uplink data ===
206 +This feature is supported since firmware version v110
298 298  
208 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
209 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
210 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
211 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
212 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
213 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
214 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
299 299  
300 -(% style="color:blue" %)**AT Commands:**
216 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image012.png]]
301 301  
302 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
218 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image013.png]]
303 303  
304 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
305 -
306 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
307 -
308 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
309 -
310 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
311 -
312 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
313 -
314 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
315 -
316 -​ [[image:image-20221021111058-12.png]]
317 -
318 -
319 -[[image:image-20221021111201-16.png||height="472" width="653"]]
320 -
321 321  ​
322 322  
323 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
222 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
324 324  
224 +**2.2.7 Use TCP protocol to uplink data**
325 325  
226 +This feature is supported since firmware version v110
326 326  
327 -=== 2.2.7 Use TCP protocol to uplink data ===
228 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
229 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
328 328  
231 +​ [[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image014.png]]
329 329  
330 -(% style="color:blue" %)**AT Commands:**
233 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image015.png||alt="说明: 1657250255956-604.png"]]
331 331  
332 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
333 -
334 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
335 -
336 -​ [[image:image-20221021111125-14.png]]
337 -
338 -[[image:image-20221021111131-15.png]]
339 -
340 340  ​
341 341  
237 +**2.2.8 Change Update Interval**
342 342  
343 -=== 2.2.8 Change Update Interval ===
239 +User can use below command to change the **uplink interval**.
344 344  
241 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
345 345  
346 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
243 +**NOTE:**
347 347  
348 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
245 +**~1. By default, the device will send an uplink message every 1 hour.**
349 349  
350 -(% style="color:red" %)**NOTE:**
247 +**2.3  Uplink Payload**
351 351  
352 -1.  By default, the device will send an uplink message every 4 hour.
249 +In this mode, uplink payload includes 87 bytes in total by default.
353 353  
354 -
355 -
356 -== 2.3  Uplink Payload ==
357 -
358 -
359 -The uplink payload includes 123 bytes in total by default.
360 -
361 361  Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
362 362  
253 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
254 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
363 363  
364 -(% border="1.5" style="background-color:#ffffcc; color:green; width:510px" %)
365 -|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:40px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:60px" %)**3**
366 -|=(% style="width: 96px;" %)**Value**|(% style="width:84px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:44px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:121px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:52px" %)MOD|(% style="width:84px" %)[[ Calculate Flag>>||anchor="H2.4.5A0CalculateFlag"]]|(% style="width:116px" %)[[Contact Status>>||anchor="H2.4.7A0ContactStatus"]]|(% style="width:57px" %)[[Alarm>>||anchor="H2.4.6A0Alarm"]]|(% style="width:91px" %)[[Total pulse>>||anchor="H2.4.8A0Totalpulse"]]
367 367  
368 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
369 -|(% style="width:100px" %)**3**|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:100px" %)**3**|(% style="width:80px" %)4|(% style="width:50px" %)**8 group**
370 -|(% style="width:176px" %)[[The last open duration>>||anchor="H2.4.9A0Thelastopenduration"]]|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Contact Status|(% style="width:92px" %)Total pulse|(% style="width:169px" %)The last open duration|(% style="width:97px" %)Time stamp|(% style="width:74px" %)...
257 +|2|2|4|8 group
258 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
371 371  
372 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
260 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
373 373  
374 -[[image:image-20221117145932-2.png]]
262 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image016.png]]
375 375  
376 -
377 377  The payload is ASCII string, representative same HEX:
378 378  
379 -**0x **f867787050213317  0064  0ccf 19 01 00 00 000016 000017 637590df
266 +0xf86778705021331700640c7817010001000000090000026315537b 0100000b02000002663510fed0100000e0200000263510f39010000000000000063510e85010000000000000063510d2e010000000000000063510c7a010000000000000063510bc6010000000000000063510954010000000000000063510882 where:
380 380  
381 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
268 +* **Device ID: 0x f867787050213317 = f867787050213317**
269 +* **Version: 0x0064=100=1.0.0**
382 382  
383 -**where:**
271 +* **BAT: 0x0c78 = 3192 mV = 3.192V**
272 +* **Singal: 0x17 = 23**
273 +* **Mod: 0x01 = 1**
274 +* **Calculate Flag: 0x00= 0**
275 +* **Contact Status: 0x00= 0**
276 +* **Alarm:0x00 =0**
277 +* **Total pulse:0x09 =0**
278 +* **The last open duration:0x02 =2**
279 +* **Time stamp : 0x6315537b =1662342011**
280 +* **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000b0200002663510fed**
281 +* **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000e0200002663510f39,.......**
384 384  
385 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
283 +**2.4  Payload Explanation and Sensor Interface**
386 386  
387 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
285 +**2.4.1  Device ID**
388 388  
389 -* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
287 +By default, the Device ID equal to the last 15 bits of IMEI.
390 390  
391 -* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
289 +User can use **AT+DEUI** to set Device ID
392 392  
393 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
394 -
395 -* (% style="color:#037691" %)**Door Status:**(%%) 0x00=0
396 -
397 -* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
398 -
399 -* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
400 -
401 -* (% style="color:#037691" %)**last open time: **(%%)0x000017 =23
402 -
403 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
404 -
405 -
406 -
407 -== 2.4  Payload Explanation and Sensor Interface ==
408 -
409 -
410 -=== 2.4.1  Device ID ===
411 -
412 -
413 -By default, the Device ID is equal to the last 15 bits of IMEI.
414 -
415 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
416 -
417 417  **Example:**
418 418  
419 419  AT+DEUI=868411056754138
420 420  
421 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
295 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
422 422  
297 +**2.4.2  Version Info**
423 423  
299 +Specify the software version: 0x64=100, means firmware version 1.00.
424 424  
425 -=== 2.4.2  Version Info ===
301 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
426 426  
303 +**2.4.3  Battery Info**
427 427  
428 -Specify the software version: 0x64=100, which means firmware version 1.00.
429 -
430 -For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
431 -
432 -
433 -
434 -=== 2.4.3  Battery Info ===
435 -
436 -
437 437  Check the battery voltage for CPN01.
438 438  
439 439  Ex1: 0x0B45 = 2885mV
... ... @@ -440,11 +440,8 @@
440 440  
441 441  Ex2: 0x0B49 = 2889mV
442 442  
311 +**2.4.4  Signal Strength**
443 443  
444 -
445 -=== 2.4.4  Signal Strength ===
446 -
447 -
448 448  NB-IoT Network signal Strength.
449 449  
450 450  **Ex1: 0x1d = 29**
... ... @@ -459,13 +459,10 @@
459 459  
460 460  **99**    Not known or not detectable
461 461  
327 +**2.4.5 Calculate Flag**
462 462  
329 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
463 463  
464 -=== 2.4.5  Calculate Flag ===
465 -
466 -
467 -The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
468 -
469 469  User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
470 470  
471 471  Default value: 0. 
... ... @@ -472,65 +472,48 @@
472 472  
473 473  Range (6 bits): (b)000000 ~~ (b) 111111
474 474  
337 +**2.4.6  Alarm**
475 475  
339 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
476 476  
477 -=== 2.4.6  Alarm ===
341 +**2.4.7 Contact Status**
478 478  
479 -
480 -See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
481 -
482 -
483 -
484 -=== 2.4.7  Contact Status ===
485 -
486 -
487 487  0: Open
488 488  
489 489  1: Close
490 490  
347 +**2.4.8 Total pulse**
491 491  
349 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
492 492  
493 -=== 2.4.8  Total pulse ===
494 -
495 -
496 -Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
497 -
498 498  Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
499 499  
353 +**2.4.9 The last open duration**
500 500  
501 -
502 -=== 2.4.9  The last open duration ===
503 -
504 -
505 505  Dry Contact last open duration.
506 506  
507 507  Unit: min.
508 508  
509 -[[image:image-20221021111346-17.png||height="146" width="770"]]
359 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image017.png]]
510 510  
511 511  
362 +**2.4.10  Timestamp**
512 512  
513 -=== 2.4.10  Timestamp ===
364 +Time stamp : 0x6315537b =1662342011
514 514  
515 -
516 -Timestamp : 0x6315537b =1662342011
517 -
518 518  Convert Unix timestamp to time 2022-9-5 9:40:11.
519 519  
520 520  **~ **
521 521  
370 +**2.5  Downlink Payload**
522 522  
523 -== 2.5  Downlink Payload ==
524 -
525 -
526 526  By default, CPN01 prints the downlink payload to console port.
527 527  
528 -[[image:image-20221021111414-18.png]] ​
374 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image018.png||alt="说明: image-20220708133731-5.png"]] ​
529 529  
530 -
531 531  **Examples:**
532 532  
533 -* (% style="color:#037691" %)**Set TDC**
378 +* **Set TDC**
534 534  
535 535  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
536 536  
... ... @@ -538,39 +538,36 @@
538 538  
539 539  Payload:    01 00 00 3C    TDC=60S
540 540  
541 -* (% style="color:#037691" %)**Reset**
386 +* **Reset**
542 542  
543 543  If payload = 0x04FF, it will reset the NSE01
544 544  
545 -* (% style="color:#037691" %)**INTMOD**
390 +* **INTMOD**
546 546  
547 547  Downlink Payload: 06000003, Set AT+INTMOD=3
548 548  
394 +**2.6  ​LED Indicator**
549 549  
396 +The CPN01 has an internal LED which is to show the status of different state.
550 550  
551 -== 2.6  ​LED Indicator ==
552 -
553 -
554 -The CPN01 has an internal LED which is to show the status of different states.
555 -
556 -* When the device starts normally, the LED will light up for 1 second.
398 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
399 +* Then the LED will be on for 1 second means device is boot normally.
557 557  * After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
558 558  * For each uplink probe, LED will be on for 500ms.
559 559  
560 -== 2.7  Alarm Base on Timeout ==
403 +**2.7 ** Alarm Base on Timeout
561 561  
405 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
562 562  
563 -CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
564 564  
408 +**~1. Keep Status: Status to be monitor**
565 565  
566 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
567 -
568 568  Keep Status = 1: Monitor Close to Open event
569 569  
570 570  Keep Status = 0: Monitor Open to Close event
571 571  
572 572  
573 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
415 +**2. Keep Time: Timeout to send an Alarm**
574 574  
575 575  Range 0 ~~ 65535(0xFFFF) seconds.
576 576  
... ... @@ -579,178 +579,140 @@
579 579  If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
580 580  
581 581  
582 -(% style="color:blue" %)**AT Command to configure:**
424 +**AT Command** to configure:
583 583  
584 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
426 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
585 585  
586 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
428 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
587 587  
430 +**2.8** Set debug mode
588 588  
589 -
590 -== 2.8  Set debug mode ==
591 -
592 -
593 593  Feature: Enable or Disable debug mode
594 594  
595 -(% style="color:blue" %)**AT Command: AT+DEBUG**
596 596  
597 -[[image:image-20221021111629-21.png]]
435 +**AT Command: AT+DEBUG**
598 598  
437 +|**Command Example**|**Function**|**Response**
438 +|AT+DEBUG =0|Disable debug mode to 0|OK
439 +|AT+ DEBUG =1|Enable debug mode to 1|OK
599 599  
441 +== 2.9 Clear Flash Record ==
600 600  
601 -== 2.9  Clear Flash Record ==
602 -
603 -
604 604  Feature: Clear flash storage for data log feature.
605 605  
606 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
445 +**AT Command: AT+CLRDTA**
607 607  
608 -[[image:image-20221021111527-19.png]]
447 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image019.png||alt="说明: image-20220609151132-7.png"]]
609 609  
449 +**~ 2.10 **Set trigger mode
610 610  
451 +➢ AT Command: **AT+TTRMOD**
611 611  
612 -== 2.10  Set trigger mode ==
613 -
614 -
615 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
616 -
617 617  Feature: Set the trigger interrupt mode.
618 618  
619 -[[image:image-20221021111552-20.png]]
455 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image020.png||alt="说明: image-20220609151344-9.png"]]
620 620  
457 +**2.11** Set the calculate flag
621 621  
622 -
623 -== 2.11  Set the calculate flag ==
624 -
625 -
626 626  Feature: Set the calculate flag
627 627  
628 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
461 +**AT Command: AT+CALCFLAG**
629 629  
630 -[[image:image-20221021111711-22.png]]
463 +|**Command Example**|**Function**|**Response**
464 +|AT+CALCFLAG =1|Set the calculate flag to 1.|OK
465 +|AT+CALCFLAG =2|Set the calculate flag to 2.|OK
631 631  
467 +**2.12** Set count number
632 632  
633 -
634 -== 2.12 Set count number ==
635 -
636 -
637 637  Feature: Manually set the count number
638 638  
639 -(% style="color:blue" %)**AT Command: AT+SETCNT**
471 +**AT Command: AT+SETCNT**
640 640  
641 -[[image:image-20221021111748-24.png]]
473 +|**Command Example**|**Function**|**Response**
474 +|AT+ SETCNT =0|Set the count number to 0.|OK
475 +|AT+ SETCNT =100|Set the count number to 100.|OK
642 642  
643 643  
478 +**2.13 Set the number of data to be uploaded and the recording time**
644 644  
645 -== 2.13  Set the number of data to be uploaded and the recording time ==
480 +➢ AT Command:
646 646  
482 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
647 647  
648 -(% style="color:blue" %)**AT Command:**
649 649  
650 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
485 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
651 651  
652 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
487 +**2.14 Read or Clear cached data**
653 653  
489 +➢ AT Command:
654 654  
491 +AT+CDP    ~/~/ Read cached data
655 655  
656 -== 2.14  Read or Clear cached data ==
493 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image021.png]]
657 657  
658 658  
659 -(% style="color:blue" %)**AT Command:**
496 +AT+CDP=0    ~/~/ Clear cached data ​
660 660  
661 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
498 +**2.15  ​Firmware Change Log**
662 662  
663 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
500 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
664 664  
665 -[[image:image-20221021111810-25.png||height="364" width="797"]]
502 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
666 666  
504 +**2.16  ​Battery Analysis**
667 667  
506 +**2.16.1  ​Battery Type**
668 668  
669 -== 2.15  ​Firmware Change Log ==
508 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
670 670  
510 +The battery is designed to last for several years depends on the actually use environment and update interval. 
671 671  
672 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
512 +The battery related documents as below:
673 673  
674 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
675 -
676 -
677 -
678 -== 2.16  ​Battery Analysis ==
679 -
680 -
681 -=== 2.16.1  ​Battery Type ===
682 -
683 -
684 -The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
685 -
686 -The battery is designed to last for several years depends on the actual use environment and update interval. 
687 -
688 -The battery-related documents as below:
689 -
690 690  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
691 -
692 692  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
693 -
694 694  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
695 695  
696 -[[image:image-20221021111911-26.png]] ​
518 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image022.png||alt="说明: image-20220708140453-6.png"]] ​
697 697  
520 +**2.16.2  Power consumption Analyze**
698 698  
699 -
700 -=== 2.16.2  Power consumption Analyze ===
701 -
702 -
703 703  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
704 704  
705 705  Instruction to use as below:
706 706  
707 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
526 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
708 708  
709 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
528 +**Step 2: ** Open it and choose
710 710  
711 711  * Product Model
712 -
713 713  * Uplink Interval
714 -
715 715  * Working Mode
716 716  
717 717  And the Life expectation in difference case will be shown on the right.
718 718  
719 -[[image:1666596205057-567.png]] ​
536 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image023.jpg||alt="说明: image-20220708141352-7.jpeg"]] ​
720 720  
538 +**2.16.3  ​Battery Note**
721 721  
722 -
723 -=== 2.16.3  ​Battery Note ===
724 -
725 -
726 726  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
727 727  
542 +**2.16.4  Replace the battery**
728 728  
729 -
730 -=== 2.16.4  Replace the battery ===
731 -
732 -
733 733  The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
734 734  
546 +**3. ​ Access NB-IoT Module**
735 735  
736 -
737 -= 3. ​ Access NB-IoT Module =
738 -
739 -
740 740  Users can directly access the AT command set of the NB-IoT module.
741 741  
742 742  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
743 743  
744 -[[image:image-20221021112006-28.png]] ​
552 +[[image:file:///C:\Users\ADMINI~~1\AppData\Local\Temp\msohtmlclip1\01\clip_image024.png||alt="说明: 1657261278785-153.png"]] ​
745 745  
554 +**4.  Using the AT Commands**
746 746  
556 +**4.1  Access AT Commands**
747 747  
748 -= 4.  Using the AT Commands =
749 -
750 -
751 -== 4.1  Access AT Commands ==
752 -
753 -
754 754  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
755 755  
756 756  AT+<CMD>?  : Help on <CMD>
... ... @@ -761,9 +761,8 @@
761 761  
762 762  AT+<CMD>=?  : Get the value
763 763  
568 +**General Commands**      
764 764  
765 -(% style="color:blue" %)**General Commands**      
766 -
767 767  AT  : Attention       
768 768  
769 769  AT?  : Short Help     
... ... @@ -786,12 +786,15 @@
786 786  
787 787  AT+SERVADDR  : Server Address
788 788  
789 -AT+TR      :  Get or Set record time
592 +AT+TR      : Get or Set record time"
790 790  
594 +
791 791  AT+NOUD      : Get or Set the number of data to be uploaded
792 792  
793 -AT+CDP     :  Read or Clear cached data
794 794  
598 +AT+CDP     : Read or Clear cached data
599 +
600 +
795 795  AT+ DEBUG   : Enable or Disable debug mode
796 796  
797 797  AT+ TTRIG   : Get or Set Alarm Base on Timeout
... ... @@ -802,19 +802,16 @@
802 802  
803 803  AT+ CLRC   : Clear current door open count
804 804  
611 +**COAP Management**      
805 805  
806 -(% style="color:blue" %)**COAP Management**      
807 -
808 808  AT+URI            : Resource parameters
809 809  
615 +**UDP Management**
810 810  
811 -(% style="color:blue" %)**UDP Management**
812 -
813 813  AT+CFM          : Upload confirmation mode (only valid for UDP)
814 814  
619 +**MQTT Management**
815 815  
816 -(% style="color:blue" %)**MQTT Management**
817 -
818 818  AT+CLIENT               : Get or Set MQTT client
819 819  
820 820  AT+UNAME  : Get or Set MQTT Username
... ... @@ -825,71 +825,86 @@
825 825  
826 826  AT+SUBTOPIC  : Get or Set MQTT subscription topic
827 827  
631 +**Information**          
828 828  
829 -(% style="color:blue" %)**Information**          
830 -
831 831  AT+FDR  : Factory Data Reset
832 832  
833 833  AT+PWORD  : Serial Access Password
834 834  
637 +**​5.  FAQ**
835 835  
639 +**5.1 ​ How to Upgrade Firmware**
836 836  
837 -= ​5.  FAQ =
641 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
838 838  
643 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
839 839  
840 -== 5.1 ​ How to Upgrade Firmware ==
645 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
841 841  
647 +**5.2  Can I calibrate CPN01 to different soil types?**
842 842  
843 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
649 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
844 844  
845 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
651 +**6.  Trouble Shooting**
846 846  
847 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
653 +**6.1  ​Connection problem when uploading firmware**
848 848  
655 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
849 849  
657 +**6.2  AT Command input doesn't work**
850 850  
851 -= 6.  Trouble Shooting =
659 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
852 852  
661 +**7. ​ Order Info**
853 853  
854 -== 6.1  ​Connection problem when uploading firmware ==
663 +Part Number**:** CPN01
855 855  
665 +**8.  Packing Info**
856 856  
857 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
667 +**Package Includes**:
858 858  
669 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
670 +* External antenna x 1
859 859  
672 +**Dimension and weight**:
860 860  
861 -== 6.2  AT Command input doesn't work ==
674 +* Size: 195 x 125 x 55 mm
675 +* Weight:   420g
862 862  
677 +**9.  Support**
863 863  
864 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
679 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
680 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
865 865  
682 +​
866 866  
867 867  
868 -= 7. ​ Order Info =
869 869  
870 870  
871 -Part Number**:** CPN01
872 872  
873 873  
874 874  
875 -= 8.  Packing Info =
876 876  
877 877  
878 -(% style="color:blue" %)**Package Includes**:
879 879  
880 -* CPN01 Open/Close Sensor x 1
881 -* External antenna x 1
882 882  
883 -(% style="color:blue" %)**Dimension and weight**:
884 884  
885 -* Size: 195 x 125 x 55 mm
886 -* Weight:   420g
887 887  
888 -= 9.  Support =
889 889  
890 890  
891 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
892 892  
893 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
894 894  
895 -​
700 +
701 +
702 +
703 +
704 +
705 +
706 +
707 +
708 +
709 +
710 +
711 +
712 +
713 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0