Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 60.1 >
edited by Xiaoling
on 2022/11/17 14:59
To version < 45.1 >
edited by David Huang
on 2022/10/24 09:16
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,65 +1,34 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 +{{toc/}}
4 4  
6 += **1. Introduction** =
5 5  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
6 6  
10 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
7 7  
12 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
8 8  
14 +CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
9 9  
10 -**Table of Contents：**
16 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
11 11  
18 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
19 +\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
20 +\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
21 +\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
12 12  
23 +​
13 13  
25 +== **​1.2 Features** ==
14 14  
15 -
16 -= 1.  Introduction =
17 -
18 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
19 -
20 -
21 -(((
22 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
23 -)))
24 -
25 -(((
26 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
27 -)))
28 -
29 -(((
30 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
31 -)))
32 -
33 -(((
34 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
35 -)))
36 -
37 -(((
38 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
39 -)))
40 -
41 -(((
42 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
43 -)))
44 -
45 -(((
46 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
47 -)))
48 -
49 -(((
50 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
51 -)))
52 -
53 -
54 -
55 -== ​1.2  Features ==
56 -
57 -
58 58  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
59 59  * Open/Close detect
60 60  * Open/Close statistics
61 61  * Monitor Battery Level
62 -* connect two door sensors
31 +* Uplink on periodically and open/close event
63 63  * Datalog feature
64 64  * Uplink periodically
65 65  * Downlink to change configure
... ... @@ -70,43 +70,14 @@
70 70  * Micro SIM card slot for NB-IoT SIM
71 71  * 8500mAh Battery for long-term use
72 72  
42 +== **1.3  Specification** ==
73 73  
44 +**Common DC Characteristics:**
74 74  
75 -== 1.3  Storage & Operation ==
76 -
77 -
78 -Temperature -40°C to +85°C
79 -
80 -
81 -== 1.4  Mechanical ==
82 -
83 -
84 -[[image:image-20221117114937-4.png]]
85 -
86 -
87 -[[image:image-20221117114949-5.png]]
88 -
89 -
90 -[[image:image-20221117115010-6.png]]
91 -
92 -
93 -
94 -== 1.5 ​ Applications ==
95 -
96 -
97 -[[image:image-20221117114842-3.png]]
98 -
99 -
100 -
101 -== 1.6  Specification ==
102 -
103 -
104 -(% style="color:blue" %)**Common DC Characteristics:**
105 -
106 106  * Supply Voltage: 2.1v ~~ 3.6v
107 107  * Operating Temperature: -40 ~~ 85°C
108 108  
109 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
110 110  
111 111  * - B1 @H-FDD: 2100MHz
112 112  * - B3 @H-FDD: 1800MHz
... ... @@ -115,98 +115,90 @@
115 115  * - B20 @H-FDD: 800MHz
116 116  * - B28 @H-FDD: 700MHz
117 117  
58 +== **1.4 Installation** ==
118 118  
60 +Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
119 119  
120 -== 1.7  Pin Definitions and Switch ==
62 +[[image:image-20221021110329-1.png]]
121 121  
64 +[[image:image-20221022234602-2.png||height="288" width="922"]]
122 122  
123 -[[image:image-20221021110429-4.png]]
124 124  
67 +== **1.5 ​Applications** ==
125 125  
126 -=== 1.7.1  Pin Definition ===
69 +* Open/Close Detection
70 +* Pulse meter application
71 +* Dry Contact Detection
127 127  
73 +== **1.6 Mechanical** ==
128 128  
129 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
75 +​[[image:image-20221021110415-3.png]]
130 130  
77 +== ** 1.7 Pin Definitions and Switch** ==
131 131  
79 +[[image:image-20221021110429-4.png]]
132 132  
133 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
81 +=== **1.7.1 Pin Definition** ===
134 134  
83 +CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
135 135  
136 -Power on Device when putting this jumper.
137 137  
86 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
138 138  
88 +Power on Device when putting this jumper.
139 139  
140 -=== 1.7.3  BOOT MODE / SW1 ===
141 141  
91 +=== **1.7.3 BOOT MODE / SW1** ===
142 142  
143 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
144 144  
145 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
146 146  
96 +2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
147 147  
148 148  
149 -=== 1.7.4  Reset Button ===
99 +=== **1.7.4 Reset Button** ===
150 150  
151 151  
152 152  Press to reboot the device.
153 153  
154 154  
105 +=== **1.7.5 LED** ===
155 155  
156 -=== 1.7.5  LED ===
157 157  
158 -
159 159  The LED will blink when :
160 160  
161 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
162 162  
163 -2.  Send an uplink packet
113 += **2.  Use CPN01 to communicate with IoT Server** =
164 164  
115 +== **2.1  How it works** ==
165 165  
117 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
166 166  
167 -== 1.8  Magnet Distance ==
119 +The diagram below shows the working flow in the default firmware of CPN01:
168 168  
169 -
170 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
171 -
172 -(% style="color:blue" %)**Iron Door:**(%%)**  **30 ~~ 45mm
173 -
174 -
175 -
176 -= 2.  Use CPN01 to communicate with IoT Server =
177 -
178 -== 2.1  How it works ==
179 -
180 -
181 -In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
182 -
183 -The diagram below shows the working flow in the default firmware of NDS03A:
184 -
185 185  [[image:image-20221021110615-5.png]]
186 186  
187 187  
124 +== **2.2 ​ Configure CPN01** ==
188 188  
189 -== 2.2 ​ Configure NDS03A ==
126 +=== **2.2.1 Test Requirement** ===
190 190  
191 -=== 2.2.1 Test Requirement ===
128 +To use CPN01 in your city, make sure to meet below requirements:
192 192  
193 -
194 -To use NDS03A in your city, make sure to meet below requirements:
195 -
196 196  * Your local operator has already distributed an NB-IoT Network.
197 -* The local NB-IoT network used the band that NDS03A supports.
131 +* The local NB-IoT network used the band that CPN01 supports.
198 198  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
199 199  
200 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
201 201  
202 -[[image:image-20221117142300-1.png]]
136 +[[image:image-20221023000439-3.png]]
203 203  
204 204   ​
205 205  
140 +=== **2.2.2 Insert NB-IoT SIM card** ===
206 206  
207 -=== 2.2.2 Insert NB-IoT SIM card ===
208 -
209 -
210 210  Insert the NB-IoT Card get from your provider.
211 211  
212 212  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -214,127 +214,101 @@
214 214  [[image:image-20221021110745-6.png]] ​
215 215  
216 216  
149 +=== **2.2.3 Connect USB – TTL to CPN01 and configure it** ===
217 217  
218 -=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
151 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
219 219  
153 +**Connection:**
220 220  
221 -User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
155 + USB TTL GND <~-~-~-~-> GND
222 222  
223 -(% style="color:blue" %)**Connection:**
157 + USB TTL TXD <~-~-~-~-> UART_RXD
224 224  
225 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
159 + USB TTL RXD <~-~-~-~-> UART_TXD
226 226  
227 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
228 -
229 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
230 -
231 -
232 232  In the PC, use below serial tool settings:
233 233  
234 -* Baud:  (% style="color:red" %)**9600**
163 +* Baud:  **9600**
164 +* Data bits:** 8**
165 +* Stop bits: **1**
166 +* Parity:  **None**
167 +* Flow Control: **None**
235 235  
236 -* Data bits:** (% style="color:red" %)8(%%)**
169 +Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
237 237  
238 -* Stop bits: (% style="color:red" %)**1**
239 -
240 -* Parity:  (% style="color:red" %)**None**
241 -
242 -* Flow Control: (% style="color:red" %)**None**
243 -
244 -Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
245 -
246 246  ​[[image:image-20221021110817-7.png]]
247 247  
248 -NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
173 +CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
249 249  
250 250  
251 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
252 252  
253 253  
179 +=== **2.2.4 Use CoAP protocol to uplink data** ===
254 254  
255 -=== 2.2.4 Use CoAP protocol to uplink data ===
181 +**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
256 256  
257 257  
258 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
184 +**Use below commands in CPN01:**
259 259  
186 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
187 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ Set CoAP server address and port
188 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set CoAP resource path
260 260  
261 -(% style="color:blue" %)**Use below commands in CPN01:**
262 -
263 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
264 -
265 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
266 -
267 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
268 -
269 269  For parameter description, please refer to AT command set
270 270  
271 271  [[image:image-20221021110948-8.png]]
272 272  
273 273  
274 -After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
195 +After configuring the server address and **reset CPN01** (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
275 275  
276 276  [[image:image-20221021110956-9.png]] ​
277 277  
278 278  
200 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
279 279  
280 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
281 281  
203 +**AT Commands:**
282 282  
283 -(% style="color:blue" %)**AT Commands:**
205 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
206 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ Set UDP server address and port
207 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
284 284  
285 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
286 -
287 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
288 -
289 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
290 -
291 291  ​ [[image:image-20221021111025-10.png]]
292 292  
293 -
294 294  [[image:image-20221021111033-11.png||height="241" width="576"]]
295 295  
296 296  ​
297 297  
215 +=== **2.2.6 Use MQTT protocol to uplink data** ===
298 298  
299 -=== 2.2.6 Use MQTT protocol to uplink data ===
300 300  
218 +**AT Commands:**
301 301  
302 -(% style="color:blue" %)**AT Commands:**
220 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
221 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
222 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
223 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
224 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
225 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
226 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
303 303  
304 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
305 -
306 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
307 -
308 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
309 -
310 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
311 -
312 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
313 -
314 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
315 -
316 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
317 -
318 318  ​ [[image:image-20221021111058-12.png]]
319 319  
230 +[[image:image-20221021111108-13.png]]
320 320  
321 -[[image:image-20221021111201-16.png||height="472" width="653"]]
322 -
323 323  ​
324 324  
325 325  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
326 326  
327 327  
237 +=== **2.2.7 Use TCP protocol to uplink data** ===
328 328  
329 -=== 2.2.7 Use TCP protocol to uplink data ===
239 +**AT Commands**
330 330  
241 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
242 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ Set TCP server address and port
331 331  
332 -(% style="color:blue" %)**AT Commands:**
333 -
334 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
335 -
336 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
337 -
338 338  ​ [[image:image-20221021111125-14.png]]
339 339  
340 340  [[image:image-20221021111131-15.png]]
... ... @@ -341,82 +341,73 @@
341 341  
342 342  ​
343 343  
250 +=== **2.2.8 Change Update Interval** ===
344 344  
345 -=== 2.2.8 Change Update Interval ===
252 +User can use below command to change the **uplink interval**.
346 346  
254 +* **AT+TDC=7200      ** ~/~/ Set Update Interval to 7200s (2 hours)
347 347  
348 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
256 +**NOTE:**
349 349  
350 -* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
258 +**~1. By default, the device will send an uplink message every 1 hour.**
351 351  
352 -(% style="color:red" %)**NOTE:**
353 353  
354 -1.  By default, the device will send an uplink message every 4 hour.
261 +== **2.3  Uplink Payload** ==
355 355  
356 -
357 -
358 -== 2.3  Uplink Payload ==
359 -
360 -
361 361  The uplink payload includes 123 bytes in total by default.
362 362  
363 363  Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
364 364  
267 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**1**|**1**|**3**
268 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[ Calculate Flag>>path:#H2.4.8A0DigitalInterrupt]]|Contact Status|Alarm|Total pulse
365 365  
366 -(% border="1.5" style="background-color:#ffffcc; color:green; width:510px" %)
367 -|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:40px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:60px" %)**3**
368 -|=(% style="width: 96px;" %)**Value**|(% style="width:84px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:44px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:121px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:52px" %)MOD|(% style="width:84px" %)[[ Calculate Flag>>||anchor="H2.4.5A0CalculateFlag"]]|(% style="width:116px" %)[[Contact Status>>||anchor="H2.4.7A0ContactStatus"]]|(% style="width:57px" %)[[Alarm>>||anchor="H2.4.6A0Alarm"]]|(% style="width:91px" %)[[Total pulse>>||anchor="H2.4.8A0Totalpulse"]]
270 +(% style="width:1201px" %)
271 +|**3**|**4**|**1**|**3**|**1**|**3**|4|**8 group**|(% style="width:1px" %)
272 +|The last open duration|Time stamp|Contact Status|Total pulse|Calculate Flag|The last open duration|Time stamp|...|(% style="width:1px" %)
369 369  
370 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
371 -|(% style="width:100px" %)**3**|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:100px" %)**3**|(% style="width:80px" %)4|(% style="width:50px" %)**8 group**
372 -|(% style="width:176px" %)[[The last open duration>>||anchor="H2.4.9A0Thelastopenduration"]]|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Contact Status|(% style="width:92px" %)Total pulse|(% style="width:169px" %)The last open duration|(% style="width:97px" %)Time stamp|(% style="width:74px" %)...
373 -
374 374  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
375 375  
376 376  [[image:image-20221021111201-16.png||height="572" width="792"]]
377 377  
378 -
379 379  The payload is ASCII string, representative same HEX:
380 380  
381 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0c78__(% style="color:#00b0f0" %) __17__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__ (% style="color:#660066" %)__00__ (% style="color:#aaaa40" %)__000009__(% style="color:#663300" %) __000002__ (% style="color:#d60093" %)__6315537b__ (% style="color:#660066" %)__01 00000b 02 0000026 63510fed__ (%%)__0100000e0200000263510f39__ __010000000000000063510e85__ __010000000000000063510d2e__ __010000000000000063510c7a__ __010000000000000063510bc6__ __010000000000000063510954__ __010000000000000063510882 __**
280 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
382 382  
383 -**where:**
282 +where:
283 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
384 384  
385 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
285 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
386 386  
387 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
287 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
388 388  
389 -* (% style="color:#037691" %)**BAT :**(%%) 0x0c78 = 3192 mV = 3.192V
289 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
390 390  
391 -* (% style="color:#037691" %)**Singal: **(%%)0x17 = 23
291 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
392 392  
393 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
293 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00=0
394 394  
395 -* (% style="color:#037691" %)**Calculate Flag:**(%%) 0x00=0
295 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00=0
396 396  
397 -* (% style="color:#037691" %)**Contact Status:**(%%) 0x00=0
297 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
398 398  
399 -* (% style="color:#037691" %)**Alarm: **(%%)0x00 =0
299 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
400 400  
401 -* (% style="color:#037691" %)**Total pulse: **(%%)0x000009 =9
301 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
402 402  
403 -* (% style="color:#037691" %)**The last open duration: **(%%)0x000002 =2
303 +*(% style="color:#037691" %)** Time stamp :**(%%) 0x6315537b =1662342011 (Unix Time)
404 404  
405 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x6315537b =1662342011 (Unix Time)
305 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 01  00000b  02  000026  63510fed
406 406  
407 -* (% style="color:#037691" %)**Contact Status, Total pulse,The last open duration ,Time stamp :**(%%) 01  00000b  000026  63510fed
307 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
408 408  
409 -* (% style="color:#037691" %)**8 sets of recorded data: Contact Status, Total pulse, The last open duration ,Time stamp :**(%%) 0100000e00002663510f39,.......
410 410  
411 -== 2.4  Payload Explanation and Sensor Interface ==
310 +== **2.4  Payload Explanation and Sensor Interface** ==
412 412  
312 +=== **2.4.1  Device ID** ===
413 413  
414 -=== 2.4.1  Device ID ===
415 -
416 -
417 417  By default, the Device ID is equal to the last 15 bits of IMEI.
418 418  
419 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
316 +User can use **AT+DEUI** to set Device ID
420 420  
421 421  **Example:**
422 422  
... ... @@ -425,19 +425,15 @@
425 425  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
426 426  
427 427  
325 +=== **2.4.2  Version Info** ===
428 428  
429 -=== 2.4.2  Version Info ===
430 -
431 -
432 432  Specify the software version: 0x64=100, which means firmware version 1.00.
433 433  
434 434  For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
435 435  
436 436  
332 +=== **2.4.3  Battery Info** ===
437 437  
438 -=== 2.4.3  Battery Info ===
439 -
440 -
441 441  Check the battery voltage for CPN01.
442 442  
443 443  Ex1: 0x0B45 = 2885mV
... ... @@ -445,10 +445,8 @@
445 445  Ex2: 0x0B49 = 2889mV
446 446  
447 447  
341 +=== **2.4.4  Signal Strength** ===
448 448  
449 -=== 2.4.4  Signal Strength ===
450 -
451 -
452 452  NB-IoT Network signal Strength.
453 453  
454 454  **Ex1: 0x1d = 29**
... ... @@ -464,10 +464,8 @@
464 464  **99**    Not known or not detectable
465 465  
466 466  
358 +=== **2.4.5 Calculate Flag** ===
467 467  
468 -=== 2.4.5  Calculate Flag ===
469 -
470 -
471 471  The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
472 472  
473 473  User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
... ... @@ -477,35 +477,27 @@
477 477  Range (6 bits): (b)000000 ~~ (b) 111111
478 478  
479 479  
369 +=== **2.4.6  Alarm** ===
480 480  
481 -=== 2.4.6  Alarm ===
371 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
482 482  
483 483  
484 -See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
374 +=== **2.4.7 Contact Status** ===
485 485  
486 -
487 -
488 -=== 2.4.7  Contact Status ===
489 -
490 -
491 491  0: Open
492 492  
493 493  1: Close
494 494  
495 495  
381 +=== **2.4.8 Total pulse** ===
496 496  
497 -=== 2.4.8  Total pulse ===
383 +Total pulse/counting based on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
498 498  
499 -
500 -Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
501 -
502 502  Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
503 503  
504 504  
388 +=== **2.4.9 The last open duration** ===
505 505  
506 -=== 2.4.9  The last open duration ===
507 -
508 -
509 509  Dry Contact last open duration.
510 510  
511 511  Unit: min.
... ... @@ -513,10 +513,8 @@
513 513  [[image:image-20221021111346-17.png||height="146" width="770"]]
514 514  
515 515  
397 +=== **2.4.10  Timestamp** ===
516 516  
517 -=== 2.4.10  Timestamp ===
518 -
519 -
520 520  Timestamp : 0x6315537b =1662342011
521 521  
522 522  Convert Unix timestamp to time 2022-9-5 9:40:11.
... ... @@ -523,18 +523,15 @@
523 523  
524 524  **~ **
525 525  
405 +== **2.5  Downlink Payload** ==
526 526  
527 -== 2.5  Downlink Payload ==
528 -
529 -
530 530  By default, CPN01 prints the downlink payload to console port.
531 531  
532 532  [[image:image-20221021111414-18.png]] ​
533 533  
534 -
535 535  **Examples:**
536 536  
537 -* (% style="color:#037691" %)**Set TDC**
413 +* **Set TDC**
538 538  
539 539  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
540 540  
... ... @@ -542,19 +542,16 @@
542 542  
543 543  Payload:    01 00 00 3C    TDC=60S
544 544  
545 -* (% style="color:#037691" %)**Reset**
421 +* **Reset**
546 546  
547 547  If payload = 0x04FF, it will reset the NSE01
548 548  
549 -* (% style="color:#037691" %)**INTMOD**
425 +* **INTMOD**
550 550  
551 551  Downlink Payload: 06000003, Set AT+INTMOD=3
552 552  
429 +== **2.6  ​LED Indicator** ==
553 553  
554 -
555 -== 2.6  ​LED Indicator ==
556 -
557 -
558 558  The CPN01 has an internal LED which is to show the status of different states.
559 559  
560 560  * When the device starts normally, the LED will light up for 1 second.
... ... @@ -561,13 +561,12 @@
561 561  * After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
562 562  * For each uplink probe, LED will be on for 500ms.
563 563  
564 -== 2.7  Alarm Base on Timeout ==
437 +== **2.7  Alarm Base on Timeout** ==
565 565  
566 -
567 567  CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
568 568  
569 569  
570 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
442 +**~1. Keep Status: Status to be monitor**
571 571  
572 572  Keep Status = 1: Monitor Close to Open event
573 573  
... ... @@ -574,7 +574,7 @@
574 574  Keep Status = 0: Monitor Open to Close event
575 575  
576 576  
577 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
449 +**2. Keep Time: Timeout to send an Alarm**
578 578  
579 579  Range 0 ~~ 65535(0xFFFF) seconds.
580 580  
... ... @@ -583,108 +583,84 @@
583 583  If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
584 584  
585 585  
586 -(% style="color:blue" %)**AT Command to configure:**
458 +**AT Command** to configure:
587 587  
588 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
460 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
589 589  
590 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
462 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
591 591  
592 592  
465 +== **2.8 Set debug mode** ==
593 593  
594 -== 2.8  Set debug mode ==
595 -
596 -
597 597  Feature: Enable or Disable debug mode
598 598  
599 -(% style="color:blue" %)**AT Command: AT+DEBUG**
600 600  
470 +**AT Command: AT+DEBUG**
471 +
601 601  [[image:image-20221021111629-21.png]]
602 602  
474 +== **2.9 Clear Flash Record** ==
603 603  
604 -
605 -== 2.9  Clear Flash Record ==
606 -
607 -
608 608  Feature: Clear flash storage for data log feature.
609 609  
610 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
478 +**AT Command: AT+CLRDTA**
611 611  
612 612  [[image:image-20221021111527-19.png]]
613 613  
482 +== ** 2.10 Set trigger mode** ==
614 614  
484 +➢ AT Command: **AT+TTRMOD**
615 615  
616 -== 2.10  Set trigger mode ==
617 -
618 -
619 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
620 -
621 621  Feature: Set the trigger interrupt mode.
622 622  
623 623  [[image:image-20221021111552-20.png]]
624 624  
490 +== **2.11 Set the calculate flag** ==
625 625  
626 -
627 -== 2.11  Set the calculate flag ==
628 -
629 -
630 630  Feature: Set the calculate flag
631 631  
632 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
494 +**AT Command: AT+CALCFLAG**
633 633  
634 634  [[image:image-20221021111711-22.png]]
635 635  
498 +== **2.12 Set count number** ==
636 636  
637 -
638 -== 2.12 Set count number ==
639 -
640 -
641 641  Feature: Manually set the count number
642 642  
643 -(% style="color:blue" %)**AT Command: AT+SETCNT**
502 +**AT Command: AT+SETCNT**
644 644  
645 645  [[image:image-20221021111748-24.png]]
646 646  
506 +== **2.13 Set the number of data to be uploaded and the recording time** ==
647 647  
508 +➢ AT Command:
648 648  
649 -== 2.13  Set the number of data to be uploaded and the recording time ==
510 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
650 650  
651 651  
652 -(% style="color:blue" %)**AT Command:**
513 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
653 653  
654 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
515 +== **2.14 Read or Clear cached data** ==
655 655  
656 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
517 +➢ AT Command:
657 657  
519 +AT+CDP    ~/~/ Read cached data
658 658  
659 -
660 -== 2.14  Read or Clear cached data ==
661 -
662 -
663 -(% style="color:blue" %)**AT Command:**
664 -
665 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
666 -
667 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
668 -
669 669  [[image:image-20221021111810-25.png||height="364" width="797"]]
670 670  
671 671  
524 +AT+CDP=0    ~/~/ Clear cached data ​
672 672  
673 -== 2.15  ​Firmware Change Log ==
526 +== **2.15  ​Firmware Change Log** ==
674 674  
528 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
675 675  
676 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
530 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
677 677  
678 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
532 +== **2.16  ​Battery Analysis** ==
679 679  
534 +=== **2.16.1  ​Battery Type** ===
680 680  
681 -
682 -== 2.16  ​Battery Analysis ==
683 -
684 -
685 -=== 2.16.1  ​Battery Type ===
686 -
687 -
688 688  The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
689 689  
690 690  The battery is designed to last for several years depends on the actual use environment and update interval. 
... ... @@ -692,55 +692,40 @@
692 692  The battery-related documents as below:
693 693  
694 694  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
695 -
696 696  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
697 -
698 698  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
699 699  
700 700  [[image:image-20221021111911-26.png]] ​
701 701  
548 +=== **2.16.2  Power consumption Analyze** ===
702 702  
703 -
704 -=== 2.16.2  Power consumption Analyze ===
705 -
706 -
707 707  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
708 708  
709 709  Instruction to use as below:
710 710  
711 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
554 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
712 712  
713 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
556 +**Step 2: ** Open it and choose
714 714  
715 715  * Product Model
716 -
717 717  * Uplink Interval
718 -
719 719  * Working Mode
720 720  
721 721  And the Life expectation in difference case will be shown on the right.
722 722  
723 -[[image:1666596205057-567.png]] ​
564 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
724 724  
566 +=== **2.16.3  ​Battery Note** ===
725 725  
726 -
727 -=== 2.16.3  ​Battery Note ===
728 -
729 -
730 730  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
731 731  
570 +=== **2.16.4  Replace the battery** ===
732 732  
733 -
734 -=== 2.16.4  Replace the battery ===
735 -
736 -
737 737  The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
738 738  
739 739  
575 += **3. ​ Access NB-IoT Module** =
740 740  
741 -= 3. ​ Access NB-IoT Module =
742 -
743 -
744 744  Users can directly access the AT command set of the NB-IoT module.
745 745  
746 746  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
... ... @@ -747,14 +747,10 @@
747 747  
748 748  [[image:image-20221021112006-28.png]] ​
749 749  
583 += **4.  Using the AT Commands** =
750 750  
585 +== **4.1  Access AT Commands** ==
751 751  
752 -= 4.  Using the AT Commands =
753 -
754 -
755 -== 4.1  Access AT Commands ==
756 -
757 -
758 758  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
759 759  
760 760  AT+<CMD>?  : Help on <CMD>
... ... @@ -765,9 +765,8 @@
765 765  
766 766  AT+<CMD>=?  : Get the value
767 767  
597 +**General Commands**      
768 768  
769 -(% style="color:blue" %)**General Commands**      
770 -
771 771  AT  : Attention       
772 772  
773 773  AT?  : Short Help     
... ... @@ -790,12 +790,15 @@
790 790  
791 791  AT+SERVADDR  : Server Address
792 792  
793 -AT+TR      :  Get or Set record time
621 +AT+TR      : Get or Set record time"
794 794  
623 +
795 795  AT+NOUD      : Get or Set the number of data to be uploaded
796 796  
797 -AT+CDP     :  Read or Clear cached data
798 798  
627 +AT+CDP     : Read or Clear cached data
628 +
629 +
799 799  AT+ DEBUG   : Enable or Disable debug mode
800 800  
801 801  AT+ TTRIG   : Get or Set Alarm Base on Timeout
... ... @@ -806,19 +806,16 @@
806 806  
807 807  AT+ CLRC   : Clear current door open count
808 808  
640 +**COAP Management**      
809 809  
810 -(% style="color:blue" %)**COAP Management**      
811 -
812 812  AT+URI            : Resource parameters
813 813  
644 +**UDP Management**
814 814  
815 -(% style="color:blue" %)**UDP Management**
816 -
817 817  AT+CFM          : Upload confirmation mode (only valid for UDP)
818 818  
648 +**MQTT Management**
819 819  
820 -(% style="color:blue" %)**MQTT Management**
821 -
822 822  AT+CLIENT               : Get or Set MQTT client
823 823  
824 824  AT+UNAME  : Get or Set MQTT Username
... ... @@ -829,71 +829,86 @@
829 829  
830 830  AT+SUBTOPIC  : Get or Set MQTT subscription topic
831 831  
660 +**Information**          
832 832  
833 -(% style="color:blue" %)**Information**          
834 -
835 835  AT+FDR  : Factory Data Reset
836 836  
837 837  AT+PWORD  : Serial Access Password
838 838  
666 += **​5.  FAQ** =
839 839  
668 +== **5.1 ​ How to Upgrade Firmware** ==
840 840  
841 -= ​5.  FAQ =
670 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
842 842  
672 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
843 843  
844 -== 5.1 ​ How to Upgrade Firmware ==
674 +**Notice, **CPN01 **and **CPL01 **share the same mother board. They use the same connection and method to update.**
845 845  
846 846  
847 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
677 += **6.  Trouble Shooting** =
848 848  
849 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
679 +== **6.1  ​Connection problem when uploading firmware** ==
850 850  
851 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
681 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
852 852  
853 853  
684 +== **6.2  AT Command input doesn't work** ==
854 854  
855 -= 6.  Trouble Shooting =
686 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
856 856  
857 857  
858 -== 6.1  ​Connection problem when uploading firmware ==
689 += **7. ​ Order Info** =
859 859  
691 +Part Number**:** CPN01
860 860  
861 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
862 862  
694 += **8.  Packing Info** =
863 863  
696 +**Package Includes**:
864 864  
865 -== 6.2  AT Command input doesn't work ==
698 +* CPN01 Open/Close Sensor x 1
699 +* External antenna x 1
866 866  
701 +**Dimension and weight**:
867 867  
868 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
703 +* Size: 195 x 125 x 55 mm
704 +* Weight:   420g
869 869  
706 += **9.  Support** =
870 870  
708 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
709 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
871 871  
872 -= 7. ​ Order Info =
711 +​
873 873  
874 874  
875 -Part Number**:** CPN01
876 876  
877 877  
878 878  
879 -= 8.  Packing Info =
880 880  
881 881  
882 -(% style="color:blue" %)**Package Includes**:
883 883  
884 -* CPN01 Open/Close Sensor x 1
885 -* External antenna x 1
886 886  
887 -(% style="color:blue" %)**Dimension and weight**:
888 888  
889 -* Size: 195 x 125 x 55 mm
890 -* Weight:   420g
891 891  
892 -= 9.  Support =
893 893  
894 894  
895 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
896 896  
897 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
898 898  
899 -​
727 +
728 +
729 +
730 +
731 +
732 +
733 +
734 +
735 +
736 +
737 +
738 +
739 +
740 +
741 +
742 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0