Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 59.1 >
edited by Xiaoling
on 2022/11/17 14:23
To version < 31.1 >
edited by David Huang
on 2022/10/21 11:21
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,68 +1,36 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 4  
5 += **1. Introduction** =
5 5  
7 +== **1.1 ​**What is CPN01 **NB-IOT** Pulse/Contact Sensor ==
6 6  
9 +The Dragino CPL01 is a **NB-IOT Contact Sensor**. It detects open/close status and uplink to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
7 7  
11 +The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
8 8  
13 +CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open for a certain time.
9 9  
10 -**Table of Contents：**
15 +CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
11 11  
17 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
18 +\\CPN01 supports different uplink methods include **TCP,MQTT,UDP and CoAP  **for different application requirement.
19 +\\CPN01 is powered by  **8500mAh Li-SOCI2 battery**, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
20 +\\To use CPN01, user needs to check if there is NB-IoT coverage in local area and with the bands CPN01 supports. If the local operate support it, user needs to get a **NB-IoT SIM card** from local operator and install CPN01 to get NB-IoT network connection
12 12  
22 +​
13 13  
14 14  
25 +== **​1.2 Features** ==
15 15  
16 -= 1.  Introduction =
17 -
18 -
19 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
20 -
21 -
22 -(((
23 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
24 -)))
25 -
26 -(((
27 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
28 -)))
29 -
30 -(((
31 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
32 -)))
33 -
34 -(((
35 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
36 -)))
37 -
38 -(((
39 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
40 -)))
41 -
42 -(((
43 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
44 -)))
45 -
46 -(((
47 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
48 -)))
49 -
50 -(((
51 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
52 -)))
53 -
54 -
55 -
56 -== ​1.2  Features ==
57 -
58 -
59 59  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
60 60  * Open/Close detect
61 61  * Open/Close statistics
62 62  * Monitor Battery Level
63 -* connect two door sensors
31 +* Uplink on periodically and open/close event
64 64  * Datalog feature
65 -* Uplink periodically
33 +* Uplink on periodically
66 66  * Downlink to change configure
67 67  * Wall Mountable
68 68  * Outdoor Use
... ... @@ -69,45 +69,16 @@
69 69  * Ultra-Low Power consumption
70 70  * AT Commands to change parameters
71 71  * Micro SIM card slot for NB-IoT SIM
72 -* 8500mAh Battery for long-term use
40 +* 8500mAh Battery for long term use
73 73  
42 +== **1.3  Specification** ==
74 74  
44 +**Common DC Characteristics:**
75 75  
76 -== 1.3  Storage & Operation ==
77 -
78 -
79 -Temperature -40°C to +85°C
80 -
81 -
82 -== 1.4  Mechanical ==
83 -
84 -
85 -[[image:image-20221117114937-4.png]]
86 -
87 -
88 -[[image:image-20221117114949-5.png]]
89 -
90 -
91 -[[image:image-20221117115010-6.png]]
92 -
93 -
94 -
95 -== 1.5 ​ Applications ==
96 -
97 -
98 -[[image:image-20221117114842-3.png]]
99 -
100 -
101 -
102 -== 1.6  Specification ==
103 -
104 -
105 -(% style="color:blue" %)**Common DC Characteristics:**
106 -
107 107  * Supply Voltage: 2.1v ~~ 3.6v
108 108  * Operating Temperature: -40 ~~ 85°C
109 109  
110 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
111 111  
112 112  * - B1 @H-FDD: 2100MHz
113 113  * - B3 @H-FDD: 1800MHz
... ... @@ -116,331 +116,253 @@
116 116  * - B20 @H-FDD: 800MHz
117 117  * - B28 @H-FDD: 700MHz
118 118  
58 +== **1.4 Installation** ==
119 119  
60 +Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
120 120  
121 -== 1.7  Pin Definitions and Switch ==
62 +[[image:image-20221021110329-1.png]]
122 122  
64 +[[image:image-20221021110340-2.png]]
123 123  
124 -[[image:image-20221021110429-4.png]]
66 +== **1.5 ​Applications** ==
125 125  
68 +* Open/Close Detection
69 +* Pulse meter application
70 +* Dry Contact Detection
126 126  
127 -=== 1.7.1  Pin Definition ===
72 +== **1.6 Mechanical** ==
128 128  
74 +​[[image:image-20221021110415-3.png]]
129 129  
130 -The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
76 +== ** 1.7 Pin Definitions and Switch** ==
131 131  
78 +[[image:image-20221021110429-4.png]]
132 132  
80 +=== **1.7.1 Pin Definition** ===
133 133  
134 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
82 +CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
135 135  
84 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
136 136  
86 +
137 137  Power on Device when putting this jumper.
138 138  
139 139  
140 140  
141 -=== 1.7.3  BOOT MODE / SW1 ===
91 +=== **1.7.3 BOOT MODE / SW1** ===
142 142  
143 143  
144 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
145 145  
146 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
96 +2) Flash: work mode, the device starts to work and send out console output for further debug
147 147  
148 148  
149 149  
150 -=== 1.7.4  Reset Button ===
100 +=== **1.7.4 Reset Button** ===
151 151  
152 152  
153 153  Press to reboot the device.
154 154  
105 +== ==
155 155  
107 +=== **1.7.5 LED** ===
156 156  
157 -=== 1.7.5  LED ===
158 158  
110 +It will flash:
159 159  
160 -The LED will blink when :
112 +1. Boot the device in flash mode
113 +1. Send an uplink packet
161 161  
162 -1.  Boot the device in flash mode
115 += **2.  Use CPN01 to communicate with IoT Server** =
163 163  
164 -2.  Send an uplink packet
117 +== **2.1  How it works** ==
165 165  
119 +The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
166 166  
121 +The diagram below shows the working flow in default firmware of CPN01:
167 167  
168 -== 1.8  Magnet Distance ==
169 -
170 -
171 -(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
172 -
173 -(% style="color:blue" %)**Iron Door:**(%%)**  **30 ~~ 45mm
174 -
175 -
176 -
177 -= 2.  Use CPN01 to communicate with IoT Server =
178 -
179 -
180 -== 2.1  How it works ==
181 -
182 -
183 -The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get (% style="color:blue" %)**Open/Close Event or Count**(%%) from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
184 -
185 -The diagram below shows the working flow in the default firmware of CPN01:
186 -
187 187  [[image:image-20221021110615-5.png]]
188 188  
125 +== **2.2 ​ Configure the CPN01** ==
189 189  
127 +=== **2.2.1 Test Requirement** ===
190 190  
191 -== 2.2 ​ Configure CPN01 ==
129 +To use CPN01 in your city, make sure meet below requirements:
192 192  
193 -
194 -=== 2.2.1 Test Requirement ===
195 -
196 -
197 -To use CPN01 in your city, make sure to meet below requirements:
198 -
199 -* Your local operator has already distributed an NB-IoT Network.
131 +* Your local operator has already distributed a NB-IoT Network there.
200 200  * The local NB-IoT network used the band that CPN01 supports.
201 201  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
202 202  
203 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
135 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
204 204  
205 -[[image:image-20221023000439-3.png]]
206 -
207 207   ​
208 208  
139 +=== **2.2.2 Insert SIM card** ===
209 209  
210 -=== 2.2.2 Insert NB-IoT SIM card ===
211 -
212 -
213 213  Insert the NB-IoT Card get from your provider.
214 214  
215 -User needs to take out the NB-IoT module and insert the SIM card like below:
143 +User need to take out the NB-IoT module and insert the SIM card like below:
216 216  
217 217  [[image:image-20221021110745-6.png]] ​
218 218  
147 +=== **2.2.3 Connect USB – TTL to CPN01 to configure it** ===
219 219  
149 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
220 220  
221 -=== 2.2.3 Connect USB – TTL to CPN01 and configure it ===
151 +**Connection:**
222 222  
153 + USB TTL GND <~-~-~-~-> GND
223 223  
224 -User need to configure CPN01 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
155 + USB TTL TXD <~-~-~-~-> UART_RXD
225 225  
226 -(% style="color:blue" %)**Connection:**
157 + USB TTL RXD <~-~-~-~-> UART_TXD
227 227  
228 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
229 -
230 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
231 -
232 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
233 -
234 -
235 235  In the PC, use below serial tool settings:
236 236  
237 -* Baud:  (% style="color:red" %)**9600**
161 +* Baud:  **9600**
162 +* Data bits:** 8**
163 +* Stop bits: **1**
164 +* Parity:  **None**
165 +* Flow Control: **None**
238 238  
239 -* Data bits:** (% style="color:red" %)8(%%)**
167 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
240 240  
241 -* Stop bits: (% style="color:red" %)**1**
242 -
243 -* Parity:  (% style="color:red" %)**None**
244 -
245 -* Flow Control: (% style="color:red" %)**None**
246 -
247 -Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
248 -
249 249  ​[[image:image-20221021110817-7.png]]
250 250  
251 -CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
171 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
252 252  
173 +=== **2.2.4 Use CoAP protocol to uplink data** ===
253 253  
254 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
175 +**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
255 255  
177 +**Use below commands:**
256 256  
179 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
180 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
181 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
257 257  
258 -=== 2.2.4 Use CoAP protocol to uplink data ===
259 -
260 -
261 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
262 -
263 -
264 -(% style="color:blue" %)**Use below commands in CPN01:**
265 -
266 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
267 -
268 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
269 -
270 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
271 -
272 272  For parameter description, please refer to AT command set
273 273  
274 274  [[image:image-20221021110948-8.png]]
275 275  
187 +After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
276 276  
277 -After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
278 -
279 279  [[image:image-20221021110956-9.png]] ​
280 280  
191 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
281 281  
193 +This feature is supported since firmware version v1.0.1
282 282  
283 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
195 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
196 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
197 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
284 284  
199 +​ ​​​​​​​[[image:image-20221021111025-10.png]]
285 285  
286 -(% style="color:blue" %)**AT Commands:**
287 -
288 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
289 -
290 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
291 -
292 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
293 -
294 -​ [[image:image-20221021111025-10.png]]
295 -
296 -
297 297  [[image:image-20221021111033-11.png||height="241" width="576"]]
298 298  
299 299  ​
300 300  
205 +=== **2.2.6 Use MQTT protocol to uplink data** ===
301 301  
302 -=== 2.2.6 Use MQTT protocol to uplink data ===
207 +This feature is supported since firmware version v110
303 303  
209 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
210 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
211 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
212 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
213 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
214 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
215 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
304 304  
305 -(% style="color:blue" %)**AT Commands:**
217 +​ ​​​​​​​[[image:image-20221021111058-12.png]]
306 306  
307 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
219 +[[image:image-20221021111108-13.png]]
308 308  
309 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
310 -
311 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
312 -
313 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
314 -
315 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
316 -
317 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
318 -
319 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
320 -
321 -​ [[image:image-20221021111058-12.png]]
322 -
323 -
324 -[[image:image-20221021111201-16.png||height="472" width="653"]]
325 -
326 326  ​
327 327  
328 -MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
223 +MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
329 329  
225 +=== **2.2.7 Use TCP protocol to uplink data** ===
330 330  
227 +This feature is supported since firmware version v110
331 331  
332 -=== 2.2.7 Use TCP protocol to uplink data ===
229 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
230 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
333 333  
232 +​ ​​​​​​​[[image:image-20221021111125-14.png]]
334 334  
335 -(% style="color:blue" %)**AT Commands:**
336 -
337 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
338 -
339 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
340 -
341 -​ [[image:image-20221021111125-14.png]]
342 -
343 343  [[image:image-20221021111131-15.png]]
344 344  
345 345  ​
346 346  
238 +=== **2.2.8 Change Update Interval** ===
347 347  
348 -=== 2.2.8 Change Update Interval ===
240 +User can use below command to change the **uplink interval**.
349 349  
242 +* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
350 350  
351 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
244 +**NOTE:**
352 352  
353 -* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (2 hours)
246 +**~1. By default, the device will send an uplink message every 1 hour.**
354 354  
355 -(% style="color:red" %)**NOTE:**
248 +== **2.3  Uplink Payload** ==
356 356  
357 -1.  By default, the device will send an uplink message every 1 hour.
250 +In this mode, uplink payload includes 87 bytes in total by default.
358 358  
359 -
360 -
361 -== 2.3  Uplink Payload ==
362 -
363 -
364 -The uplink payload includes 123 bytes in total by default.
365 -
366 366  Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
367 367  
254 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
255 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
368 368  
369 -(% border="1.5" style="background-color:#ffffcc; color:green; width:510px" %)
370 -|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:40px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:60px" %)**3**
371 -|=(% style="width: 96px;" %)**Value**|(% style="width:84px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:44px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:121px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:52px" %)MOD|(% style="width:84px" %)[[ Calculate Flag>>||anchor="H2.4.5A0CalculateFlag"]]|(% style="width:116px" %)[[Contact Status>>||anchor="H2.4.7A0ContactStatus"]]|(% style="width:57px" %)[[Alarm>>||anchor="H2.4.6A0Alarm"]]|(% style="width:91px" %)[[Total pulse>>||anchor="H2.4.8A0Totalpulse"]]
257 +|2|2|4|8 group
258 +|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
372 372  
373 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
374 -|(% style="width:100px" %)**3**|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:100px" %)**3**|(% style="width:80px" %)4|(% style="width:50px" %)**8 group**
375 -|(% style="width:176px" %)[[The last open duration>>||anchor="H2.4.9A0Thelastopenduration"]]|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Contact Status|(% style="width:92px" %)Total pulse|(% style="width:169px" %)The last open duration|(% style="width:97px" %)Time stamp|(% style="width:74px" %)...
376 -
377 377  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
378 378  
379 379  [[image:image-20221021111201-16.png||height="572" width="792"]]
380 380  
381 -
382 382  The payload is ASCII string, representative same HEX:
383 383  
384 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0c78__(% style="color:#00b0f0" %) __17__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__ (% style="color:#660066" %)__00__ (% style="color:#aaaa40" %)__000009__(% style="color:#663300" %) __000002__ (% style="color:#d60093" %)__6315537b__ (% style="color:#660066" %)__01 00000b 02 0000026 63510fed__ (%%)__0100000e0200000263510f39__ __010000000000000063510e85__ __010000000000000063510d2e__ __010000000000000063510c7a__ __010000000000000063510bc6__ __010000000000000063510954__ __010000000000000063510882 __**
266 +0xf86778705021331700640c7817010001000000090000026315537b 0100000b02000002663510fed0100000e0200000263510f39010000000000000063510e85010000000000000063510d2e010000000000000063510c7a010000000000000063510bc6010000000000000063510954010000000000000063510882 where:
385 385  
386 -**where:**
268 +* **Device ID: 0x f867787050213317 = f867787050213317**
269 +* **Version: 0x0064=100=1.0.0**
387 387  
388 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
271 +* **BAT: 0x0c78 = 3192 mV = 3.192V**
272 +* **Singal: 0x17 = 23**
273 +* **Mod: 0x01 = 1**
274 +* **Calculate Flag: 0x00= 0**
275 +* **Contact Status: 0x00= 0**
276 +* **Alarm:0x00 =0**
277 +* **Total pulse:0x09 =0**
278 +* **The last open duration:0x02 =2**
279 +* **Time stamp : 0x6315537b =1662342011**
280 +* **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000b0200002663510fed**
281 +* **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000e0200002663510f39,.......**
389 389  
390 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
283 +== **2.4  Payload Explanation and Sensor Interface** ==
391 391  
392 -* (% style="color:#037691" %)**BAT :**(%%) 0x0c78 = 3192 mV = 3.192V
285 +=== **2.4.1  Device ID** ===
393 393  
394 -* (% style="color:#037691" %)**Singal: **(%%)0x17 = 23
287 +By default, the Device ID equal to the last 15 bits of IMEI.
395 395  
396 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
289 +User can use **AT+DEUI** to set Device ID
397 397  
398 -* (% style="color:#037691" %)**Calculate Flag:**(%%) 0x00=0
399 -
400 -* (% style="color:#037691" %)**Contact Status:**(%%) 0x00=0
401 -
402 -* (% style="color:#037691" %)**Alarm: **(%%)0x00 =0
403 -
404 -* (% style="color:#037691" %)**Total pulse: **(%%)0x000009 =9
405 -
406 -* (% style="color:#037691" %)**The last open duration: **(%%)0x000002 =2
407 -
408 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x6315537b =1662342011 (Unix Time)
409 -
410 -* (% style="color:#037691" %)**Contact Status, Total pulse,The last open duration ,Time stamp :**(%%) 01  00000b  000026  63510fed
411 -
412 -* (% style="color:#037691" %)**8 sets of recorded data: Contact Status, Total pulse, The last open duration ,Time stamp :**(%%) 0100000e00002663510f39,.......
413 -
414 -== 2.4  Payload Explanation and Sensor Interface ==
415 -
416 -
417 -=== 2.4.1  Device ID ===
418 -
419 -
420 -By default, the Device ID is equal to the last 15 bits of IMEI.
421 -
422 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
423 -
424 424  **Example:**
425 425  
426 426  AT+DEUI=868411056754138
427 427  
428 -The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
295 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
429 429  
297 +=== **2.4.2  Version Info** ===
430 430  
299 +Specify the software version: 0x64=100, means firmware version 1.00.
431 431  
432 -=== 2.4.2  Version Info ===
301 +For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
433 433  
303 +=== **2.4.3  Battery Info** ===
434 434  
435 -Specify the software version: 0x64=100, which means firmware version 1.00.
436 -
437 -For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
438 -
439 -
440 -
441 -=== 2.4.3  Battery Info ===
442 -
443 -
444 444  Check the battery voltage for CPN01.
445 445  
446 446  Ex1: 0x0B45 = 2885mV
... ... @@ -447,11 +447,8 @@
447 447  
448 448  Ex2: 0x0B49 = 2889mV
449 449  
311 +=== **2.4.4  Signal Strength** ===
450 450  
451 -
452 -=== 2.4.4  Signal Strength ===
453 -
454 -
455 455  NB-IoT Network signal Strength.
456 456  
457 457  **Ex1: 0x1d = 29**
... ... @@ -466,13 +466,10 @@
466 466  
467 467  **99**    Not known or not detectable
468 468  
327 +=== **2.4.5 Calculate Flag** ===
469 469  
329 +The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
470 470  
471 -=== 2.4.5  Calculate Flag ===
472 -
473 -
474 -The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
475 -
476 476  User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
477 477  
478 478  Default value: 0. 
... ... @@ -479,36 +479,24 @@
479 479  
480 480  Range (6 bits): (b)000000 ~~ (b) 111111
481 481  
337 +=== **2.4.6  Alarm** ===
482 482  
339 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
483 483  
484 -=== 2.4.6  Alarm ===
341 +=== **2.4.7 Contact Status** ===
485 485  
486 -
487 -See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
488 -
489 -
490 -
491 -=== 2.4.7  Contact Status ===
492 -
493 -
494 494  0: Open
495 495  
496 496  1: Close
497 497  
347 +=== **2.4.8 Total pulse** ===
498 498  
349 +Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
499 499  
500 -=== 2.4.8  Total pulse ===
501 -
502 -
503 -Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
504 -
505 505  Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
506 506  
353 +=== **2.4.9 The last open duration** ===
507 507  
508 -
509 -=== 2.4.9  The last open duration ===
510 -
511 -
512 512  Dry Contact last open duration.
513 513  
514 514  Unit: min.
... ... @@ -516,28 +516,23 @@
516 516  [[image:image-20221021111346-17.png||height="146" width="770"]]
517 517  
518 518  
362 +=== **2.4.10  Timestamp** ===
519 519  
520 -=== 2.4.10  Timestamp ===
364 +Time stamp : 0x6315537b =1662342011
521 521  
522 -
523 -Timestamp : 0x6315537b =1662342011
524 -
525 525  Convert Unix timestamp to time 2022-9-5 9:40:11.
526 526  
527 527  **~ **
528 528  
370 +== **2.5  Downlink Payload** ==
529 529  
530 -== 2.5  Downlink Payload ==
531 -
532 -
533 533  By default, CPN01 prints the downlink payload to console port.
534 534  
535 535  [[image:image-20221021111414-18.png]] ​
536 536  
537 -
538 538  **Examples:**
539 539  
540 -* (% style="color:#037691" %)**Set TDC**
378 +* **Set TDC**
541 541  
542 542  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
543 543  
... ... @@ -545,39 +545,36 @@
545 545  
546 546  Payload:    01 00 00 3C    TDC=60S
547 547  
548 -* (% style="color:#037691" %)**Reset**
386 +* **Reset**
549 549  
550 550  If payload = 0x04FF, it will reset the NSE01
551 551  
552 -* (% style="color:#037691" %)**INTMOD**
390 +* **INTMOD**
553 553  
554 554  Downlink Payload: 06000003, Set AT+INTMOD=3
555 555  
394 +== **2.6  ​LED Indicator** ==
556 556  
396 +The CPN01 has an internal LED which is to show the status of different state.
557 557  
558 -== 2.6  ​LED Indicator ==
559 -
560 -
561 -The CPN01 has an internal LED which is to show the status of different states.
562 -
563 -* When the device starts normally, the LED will light up for 1 second.
398 +* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
399 +* Then the LED will be on for 1 second means device is boot normally.
564 564  * After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
565 565  * For each uplink probe, LED will be on for 500ms.
566 566  
567 -== 2.7  Alarm Base on Timeout ==
403 +== **2.7  Alarm Base on Timeout** ==
568 568  
405 +CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
569 569  
570 -CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
571 571  
408 +**~1. Keep Status: Status to be monitor**
572 572  
573 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
574 -
575 575  Keep Status = 1: Monitor Close to Open event
576 576  
577 577  Keep Status = 0: Monitor Open to Close event
578 578  
579 579  
580 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
415 +**2. Keep Time: Timeout to send an Alarm**
581 581  
582 582  Range 0 ~~ 65535(0xFFFF) seconds.
583 583  
... ... @@ -586,164 +586,123 @@
586 586  If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
587 587  
588 588  
589 -(% style="color:blue" %)**AT Command to configure:**
424 +**AT Command** to configure:
590 590  
591 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
426 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
592 592  
593 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
428 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
594 594  
430 +== **2.8 Set debug mode** ==
595 595  
596 -
597 -== 2.8  Set debug mode ==
598 -
599 -
600 600  Feature: Enable or Disable debug mode
601 601  
602 -(% style="color:blue" %)**AT Command: AT+DEBUG**
603 603  
435 +**AT Command: AT+DEBUG**
436 +
604 604  [[image:image-20221021111629-21.png]]
605 605  
439 +== **2.9 Clear Flash Record** ==
606 606  
607 -
608 -== 2.9  Clear Flash Record ==
609 -
610 -
611 611  Feature: Clear flash storage for data log feature.
612 612  
613 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
443 +**AT Command: AT+CLRDTA**
614 614  
615 615  [[image:image-20221021111527-19.png]]
616 616  
447 +== ** 2.10 Set trigger mode** ==
617 617  
449 +➢ AT Command: **AT+TTRMOD**
618 618  
619 -== 2.10  Set trigger mode ==
620 -
621 -
622 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
623 -
624 624  Feature: Set the trigger interrupt mode.
625 625  
626 626  [[image:image-20221021111552-20.png]]
627 627  
455 +== **2.11 Set the calculate flag** ==
628 628  
629 -
630 -== 2.11  Set the calculate flag ==
631 -
632 -
633 633  Feature: Set the calculate flag
634 634  
635 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
459 +**AT Command: AT+CALCFLAG**
636 636  
637 637  [[image:image-20221021111711-22.png]]
638 638  
463 +== **2.12 Set count number** ==
639 639  
640 -
641 -== 2.12 Set count number ==
642 -
643 -
644 644  Feature: Manually set the count number
645 645  
646 -(% style="color:blue" %)**AT Command: AT+SETCNT**
467 +**AT Command: AT+SETCNT**
647 647  
648 648  [[image:image-20221021111748-24.png]]
649 649  
471 +== **2.13 Set the number of data to be uploaded and the recording time** ==
650 650  
473 +➢ AT Command:
651 651  
652 -== 2.13  Set the number of data to be uploaded and the recording time ==
475 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
653 653  
654 654  
655 -(% style="color:blue" %)**AT Command:**
478 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
656 656  
657 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
480 +== **2.14 Read or Clear cached data** ==
658 658  
659 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
482 +➢ AT Command:
660 660  
484 +AT+CDP    ~/~/ Read cached data
661 661  
662 -
663 -== 2.14  Read or Clear cached data ==
664 -
665 -
666 -(% style="color:blue" %)**AT Command:**
667 -
668 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
669 -
670 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
671 -
672 672  [[image:image-20221021111810-25.png||height="364" width="797"]]
673 673  
674 674  
489 +AT+CDP=0    ~/~/ Clear cached data ​
675 675  
676 -== 2.15  ​Firmware Change Log ==
491 +== **2.15  ​Firmware Change Log** ==
677 677  
493 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
678 678  
679 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
495 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
680 680  
681 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
497 +== **2.16  ​Battery Analysis** ==
682 682  
499 +=== **2.16.1  ​Battery Type** ===
683 683  
501 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
684 684  
685 -== 2.16  ​Battery Analysis ==
503 +The battery is designed to last for several years depends on the actually use environment and update interval. 
686 686  
505 +The battery related documents as below:
687 687  
688 -=== 2.16.1  ​Battery Type ===
689 -
690 -
691 -The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
692 -
693 -The battery is designed to last for several years depends on the actual use environment and update interval. 
694 -
695 -The battery-related documents as below:
696 -
697 697  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
698 -
699 699  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
700 -
701 701  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
702 702  
703 703  [[image:image-20221021111911-26.png]] ​
704 704  
513 +=== **2.16.2  Power consumption Analyze** ===
705 705  
706 -
707 -=== 2.16.2  Power consumption Analyze ===
708 -
709 -
710 710  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
711 711  
712 712  Instruction to use as below:
713 713  
714 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
519 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
715 715  
716 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
521 +**Step 2: ** Open it and choose
717 717  
718 718  * Product Model
719 -
720 720  * Uplink Interval
721 -
722 722  * Working Mode
723 723  
724 724  And the Life expectation in difference case will be shown on the right.
725 725  
726 -[[image:1666596205057-567.png]] ​
529 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
727 727  
531 +=== **2.16.3  ​Battery Note** ===
728 728  
729 -
730 -=== 2.16.3  ​Battery Note ===
731 -
732 -
733 733  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
734 734  
535 +=== **2.16.4  Replace the battery** ===
735 735  
736 -
737 -=== 2.16.4  Replace the battery ===
738 -
739 -
740 740  The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
741 741  
539 += **3. ​ Access NB-IoT Module** =
742 742  
743 -
744 -= 3. ​ Access NB-IoT Module =
745 -
746 -
747 747  Users can directly access the AT command set of the NB-IoT module.
748 748  
749 749  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
... ... @@ -750,14 +750,10 @@
750 750  
751 751  [[image:image-20221021112006-28.png]] ​
752 752  
547 += **4.  Using the AT Commands** =
753 753  
549 +== **4.1  Access AT Commands** ==
754 754  
755 -= 4.  Using the AT Commands =
756 -
757 -
758 -== 4.1  Access AT Commands ==
759 -
760 -
761 761  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
762 762  
763 763  AT+<CMD>?  : Help on <CMD>
... ... @@ -768,9 +768,8 @@
768 768  
769 769  AT+<CMD>=?  : Get the value
770 770  
561 +**General Commands**      
771 771  
772 -(% style="color:blue" %)**General Commands**      
773 -
774 774  AT  : Attention       
775 775  
776 776  AT?  : Short Help     
... ... @@ -793,12 +793,15 @@
793 793  
794 794  AT+SERVADDR  : Server Address
795 795  
796 -AT+TR      :  Get or Set record time
585 +AT+TR      : Get or Set record time"
797 797  
587 +
798 798  AT+NOUD      : Get or Set the number of data to be uploaded
799 799  
800 -AT+CDP     :  Read or Clear cached data
801 801  
591 +AT+CDP     : Read or Clear cached data
592 +
593 +
802 802  AT+ DEBUG   : Enable or Disable debug mode
803 803  
804 804  AT+ TTRIG   : Get or Set Alarm Base on Timeout
... ... @@ -809,19 +809,16 @@
809 809  
810 810  AT+ CLRC   : Clear current door open count
811 811  
604 +**COAP Management**      
812 812  
813 -(% style="color:blue" %)**COAP Management**      
814 -
815 815  AT+URI            : Resource parameters
816 816  
608 +**UDP Management**
817 817  
818 -(% style="color:blue" %)**UDP Management**
819 -
820 820  AT+CFM          : Upload confirmation mode (only valid for UDP)
821 821  
612 +**MQTT Management**
822 822  
823 -(% style="color:blue" %)**MQTT Management**
824 -
825 825  AT+CLIENT               : Get or Set MQTT client
826 826  
827 827  AT+UNAME  : Get or Set MQTT Username
... ... @@ -832,71 +832,86 @@
832 832  
833 833  AT+SUBTOPIC  : Get or Set MQTT subscription topic
834 834  
624 +**Information**          
835 835  
836 -(% style="color:blue" %)**Information**          
837 -
838 838  AT+FDR  : Factory Data Reset
839 839  
840 840  AT+PWORD  : Serial Access Password
841 841  
630 += **​5.  FAQ** =
842 842  
632 +== **5.1 ​ How to Upgrade Firmware** ==
843 843  
844 -= ​5.  FAQ =
634 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
845 845  
636 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
846 846  
847 -== 5.1 ​ How to Upgrade Firmware ==
638 +**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
848 848  
640 +== **5.2  Can I calibrate CPN01 to different soil types?** ==
849 849  
850 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
642 +CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
851 851  
852 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
644 += **6.  Trouble Shooting** =
853 853  
854 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
646 +== **6.1  ​Connection problem when uploading firmware** ==
855 855  
648 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
856 856  
650 +== **6.2  AT Command input doesn't work** ==
857 857  
858 -= 6.  Trouble Shooting =
652 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
859 859  
654 += **7. ​ Order Info** =
860 860  
861 -== 6.1  ​Connection problem when uploading firmware ==
656 +Part Number**:** CPN01
862 862  
658 += **8.  Packing Info** =
863 863  
864 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
660 +**Package Includes**:
865 865  
662 +* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
663 +* External antenna x 1
866 866  
665 +**Dimension and weight**:
867 867  
868 -== 6.2  AT Command input doesn't work ==
667 +* Size: 195 x 125 x 55 mm
668 +* Weight:   420g
869 869  
670 += **9.  Support** =
870 870  
871 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
672 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
673 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
872 872  
675 +​
873 873  
874 874  
875 -= 7. ​ Order Info =
876 876  
877 877  
878 -Part Number**:** CPN01
879 879  
880 880  
881 881  
882 -= 8.  Packing Info =
883 883  
884 884  
885 -(% style="color:blue" %)**Package Includes**:
886 886  
887 -* CPN01 Open/Close Sensor x 1
888 -* External antenna x 1
889 889  
890 -(% style="color:blue" %)**Dimension and weight**:
891 891  
892 -* Size: 195 x 125 x 55 mm
893 -* Weight:   420g
894 894  
895 -= 9.  Support =
896 896  
897 897  
898 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
899 899  
900 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
901 901  
902 -​
693 +
694 +
695 +
696 +
697 +
698 +
699 +
700 +
701 +
702 +
703 +
704 +
705 +
706 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0