Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 58.3 >
edited by Xiaoling
on 2022/11/17 13:52
To version < 46.1 >
edited by David Huang
on 2022/10/24 10:18
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,66 +1,34 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 +{{toc/}}
4 4  
6 += **1. Introduction** =
5 5  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
6 6  
10 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
7 7  
12 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
8 8  
14 +CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
9 9  
10 -**Table of Contents：**
16 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
11 11  
18 +NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
19 +\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
20 +\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
21 +\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
12 12  
23 +​
13 13  
25 +== **​1.2 Features** ==
14 14  
15 -
16 -= 1.  Introduction =
17 -
18 -
19 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
20 -
21 -
22 -(((
23 -The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
24 -)))
25 -
26 -(((
27 -The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
28 -)))
29 -
30 -(((
31 -NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
32 -)))
33 -
34 -(((
35 -NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
36 -)))
37 -
38 -(((
39 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
40 -)))
41 -
42 -(((
43 -NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
44 -)))
45 -
46 -(((
47 -NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
48 -)))
49 -
50 -(((
51 -To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
52 -)))
53 -
54 -
55 -
56 -== ​1.2  Features ==
57 -
58 -
59 59  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
60 60  * Open/Close detect
61 61  * Open/Close statistics
62 62  * Monitor Battery Level
63 -* connect two door sensors
31 +* Uplink on periodically and open/close event
64 64  * Datalog feature
65 65  * Uplink periodically
66 66  * Downlink to change configure
... ... @@ -71,47 +71,14 @@
71 71  * Micro SIM card slot for NB-IoT SIM
72 72  * 8500mAh Battery for long-term use
73 73  
42 +== **1.3  Specification** ==
74 74  
44 +**Common DC Characteristics:**
75 75  
76 -
77 -== 1.3  Storage & Operation ==
78 -
79 -
80 -Temperature -40°C to +85°C
81 -
82 -
83 -== 1.4  Mechanical ==
84 -
85 -
86 -[[image:image-20221117114937-4.png]]
87 -
88 -
89 -[[image:image-20221117114949-5.png]]
90 -
91 -
92 -[[image:image-20221117115010-6.png]]
93 -
94 -
95 -
96 -
97 -
98 -
99 -== 1.5 ​ Applications ==
100 -
101 -
102 -[[image:image-20221117114842-3.png]]
103 -
104 -
105 -
106 -== 1.6  Specification ==
107 -
108 -
109 -(% style="color:blue" %)**Common DC Characteristics:**
110 -
111 111  * Supply Voltage: 2.1v ~~ 3.6v
112 112  * Operating Temperature: -40 ~~ 85°C
113 113  
114 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
115 115  
116 116  * - B1 @H-FDD: 2100MHz
117 117  * - B3 @H-FDD: 1800MHz
... ... @@ -120,84 +120,76 @@
120 120  * - B20 @H-FDD: 800MHz
121 121  * - B28 @H-FDD: 700MHz
122 122  
58 +== **1.4 Installation** ==
123 123  
60 +Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
124 124  
125 -== 1.7  Pin Definitions and Switch ==
62 +[[image:image-20221021110329-1.png]]
126 126  
64 +[[image:image-20221022234602-2.png||height="288" width="922"]]
127 127  
128 -[[image:image-20221021110429-4.png]]
129 129  
67 +== **1.5 ​Applications** ==
130 130  
131 -=== 1.7.1  Pin Definition ===
69 +* Open/Close Detection
70 +* Pulse meter application
71 +* Dry Contact Detection
132 132  
73 +== **1.6 Mechanical** ==
133 133  
134 -CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
75 +​[[image:image-20221021110415-3.png]]
135 135  
77 +== ** 1.7 Pin Definitions and Switch** ==
136 136  
79 +[[image:image-20221021110429-4.png]]
137 137  
138 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
81 +=== **1.7.1 Pin Definition** ===
139 139  
83 +CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
140 140  
141 -Power on Device when putting this jumper.
142 142  
86 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
143 143  
88 +Power on Device when putting this jumper.
144 144  
145 -=== 1.7.3  BOOT MODE / SW1 ===
146 146  
91 +=== **1.7.3 BOOT MODE / SW1** ===
147 147  
148 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
149 149  
150 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
151 151  
96 +2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
152 152  
153 153  
154 -=== 1.7.4  Reset Button ===
99 +=== **1.7.4 Reset Button** ===
155 155  
156 156  
157 157  Press to reboot the device.
158 158  
159 159  
105 +=== **1.7.5 LED** ===
160 160  
161 -=== 1.7.5  LED ===
162 162  
163 -
164 164  The LED will blink when :
165 165  
166 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
167 167  
168 -2.  Send an uplink packet
113 += **2.  Use CPN01 to communicate with IoT Server** =
169 169  
115 +== **2.1  How it works** ==
170 170  
117 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
171 171  
172 -== 1.8  Magnet Distance ==
173 -
174 -
175 -**Wood Door:** 10 ~~ 30mm
176 -
177 -**Iron Door:  **30 ~~ 45mm
178 -
179 -
180 -
181 -= 2.  Use CPN01 to communicate with IoT Server =
182 -
183 -
184 -== 2.1  How it works ==
185 -
186 -
187 -The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get (% style="color:blue" %)**Open/Close Event or Count**(%%) from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
188 -
189 189  The diagram below shows the working flow in the default firmware of CPN01:
190 190  
191 191  [[image:image-20221021110615-5.png]]
192 192  
193 193  
124 +== **2.2 ​ Configure CPN01** ==
194 194  
195 -== 2.2 ​ Configure CPN01 ==
126 +=== **2.2.1 Test Requirement** ===
196 196  
197 -
198 -=== 2.2.1 Test Requirement ===
199 -
200 -
201 201  To use CPN01 in your city, make sure to meet below requirements:
202 202  
203 203  * Your local operator has already distributed an NB-IoT Network.
... ... @@ -204,16 +204,14 @@
204 204  * The local NB-IoT network used the band that CPN01 supports.
205 205  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
206 206  
207 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
208 208  
209 209  [[image:image-20221023000439-3.png]]
210 210  
211 211   ​
212 212  
140 +=== **2.2.2 Insert NB-IoT SIM card** ===
213 213  
214 -=== 2.2.2 Insert NB-IoT SIM card ===
215 -
216 -
217 217  Insert the NB-IoT Card get from your provider.
218 218  
219 219  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -221,33 +221,26 @@
221 221  [[image:image-20221021110745-6.png]] ​
222 222  
223 223  
149 +=== **2.2.3 Connect USB – TTL to CPN01 and configure it** ===
224 224  
225 -=== 2.2.3 Connect USB – TTL to CPN01 and configure it ===
151 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
226 226  
153 +**Connection:**
227 227  
228 -User need to configure CPN01 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
155 + USB TTL GND <~-~-~-~-> GND
229 229  
230 -(% style="color:blue" %)**Connection:**
157 + USB TTL TXD <~-~-~-~-> UART_RXD
231 231  
232 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
159 + USB TTL RXD <~-~-~-~-> UART_TXD
233 233  
234 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
235 -
236 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
237 -
238 -
239 239  In the PC, use below serial tool settings:
240 240  
241 -* Baud:  (% style="color:red" %)**9600**
163 +* Baud:  **9600**
164 +* Data bits:** 8**
165 +* Stop bits: **1**
166 +* Parity:  **None**
167 +* Flow Control: **None**
242 242  
243 -* Data bits:** (% style="color:red" %)8(%%)**
244 -
245 -* Stop bits: (% style="color:red" %)**1**
246 -
247 -* Parity:  (% style="color:red" %)**None**
248 -
249 -* Flow Control: (% style="color:red" %)**None**
250 -
251 251  Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
252 252  
253 253  ​[[image:image-20221021110817-7.png]]
... ... @@ -255,93 +255,74 @@
255 255  CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
256 256  
257 257  
258 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
259 259  
260 260  
179 +=== **2.2.4 Use CoAP protocol to uplink data** ===
261 261  
262 -=== 2.2.4 Use CoAP protocol to uplink data ===
181 +**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
263 263  
264 264  
265 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
184 +**Use below commands in CPN01:**
266 266  
186 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
187 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ Set CoAP server address and port
188 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set CoAP resource path
267 267  
268 -(% style="color:blue" %)**Use below commands in CPN01:**
269 -
270 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
271 -
272 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
273 -
274 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
275 -
276 276  For parameter description, please refer to AT command set
277 277  
278 278  [[image:image-20221021110948-8.png]]
279 279  
280 280  
281 -After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
195 +After configuring the server address and **reset CPN01** (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
282 282  
283 283  [[image:image-20221021110956-9.png]] ​
284 284  
285 285  
200 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
286 286  
287 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
288 288  
203 +**AT Commands:**
289 289  
290 -(% style="color:blue" %)**AT Commands:**
205 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
206 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ Set UDP server address and port
207 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
291 291  
292 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
293 -
294 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
295 -
296 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
297 -
298 298  ​ [[image:image-20221021111025-10.png]]
299 299  
300 -
301 301  [[image:image-20221021111033-11.png||height="241" width="576"]]
302 302  
303 303  ​
304 304  
215 +=== **2.2.6 Use MQTT protocol to uplink data** ===
305 305  
306 -=== 2.2.6 Use MQTT protocol to uplink data ===
307 307  
218 +**AT Commands:**
308 308  
309 -(% style="color:blue" %)**AT Commands:**
220 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
221 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
222 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
223 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
224 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
225 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
226 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
310 310  
311 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
312 -
313 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
314 -
315 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
316 -
317 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
318 -
319 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
320 -
321 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
322 -
323 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
324 -
325 325  ​ [[image:image-20221021111058-12.png]]
326 326  
230 +[[image:image-20221021111108-13.png]]
327 327  
328 -[[image:image-20221021111201-16.png||height="472" width="653"]]
329 -
330 330  ​
331 331  
332 332  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
333 333  
334 334  
237 +=== **2.2.7 Use TCP protocol to uplink data** ===
335 335  
336 -=== 2.2.7 Use TCP protocol to uplink data ===
239 +**AT Commands**
337 337  
241 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
242 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ Set TCP server address and port
338 338  
339 -(% style="color:blue" %)**AT Commands:**
340 -
341 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
342 -
343 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
344 -
345 345  ​ [[image:image-20221021111125-14.png]]
346 346  
347 347  [[image:image-20221021111131-15.png]]
... ... @@ -348,82 +348,73 @@
348 348  
349 349  ​
350 350  
250 +=== **2.2.8 Change Update Interval** ===
351 351  
352 -=== 2.2.8 Change Update Interval ===
252 +User can use below command to change the **uplink interval**.
353 353  
254 +* **AT+TDC=7200      ** ~/~/ Set Update Interval to 7200s (2 hours)
354 354  
355 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
256 +**NOTE:**
356 356  
357 -* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (2 hours)
258 +**~1. By default, the device will send an uplink message every 1 hour.**
358 358  
359 -(% style="color:red" %)**NOTE:**
360 360  
361 -1.  By default, the device will send an uplink message every 1 hour.
261 +== **2.3  Uplink Payload** ==
362 362  
363 -
364 -
365 -== 2.3  Uplink Payload ==
366 -
367 -
368 368  The uplink payload includes 123 bytes in total by default.
369 369  
370 370  Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
371 371  
267 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**1**|**1**|**3**
268 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[ Calculate Flag>>path:#H2.4.8A0DigitalInterrupt]]|Contact Status|Alarm|Total pulse
372 372  
373 -(% border="1.5" style="background-color:#ffffcc; color:green; width:510px" %)
374 -|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:40px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:60px" %)**3**
375 -|=(% style="width: 96px;" %)**Value**|(% style="width:84px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:44px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:121px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:52px" %)MOD|(% style="width:84px" %)[[ Calculate Flag>>||anchor="H2.4.5A0CalculateFlag"]]|(% style="width:116px" %)[[Contact Status>>||anchor="H2.4.7A0ContactStatus"]]|(% style="width:57px" %)[[Alarm>>||anchor="H2.4.6A0Alarm"]]|(% style="width:91px" %)[[Total pulse>>||anchor="H2.4.8A0Totalpulse"]]
270 +(% style="width:1201px" %)
271 +|**3**|**4**|**1**|**3**|**1**|**3**|4|**8 group**|(% style="width:1px" %)
272 +|The last open duration|Time stamp|Contact Status|Total pulse|Calculate Flag|The last open duration|Time stamp|...|(% style="width:1px" %)
376 376  
377 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
378 -|(% style="width:100px" %)**3**|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:100px" %)**3**|(% style="width:80px" %)4|(% style="width:50px" %)**8 group**
379 -|(% style="width:176px" %)[[The last open duration>>||anchor="H2.4.9A0Thelastopenduration"]]|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Contact Status|(% style="width:92px" %)Total pulse|(% style="width:169px" %)The last open duration|(% style="width:97px" %)Time stamp|(% style="width:74px" %)...
380 -
381 381  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
382 382  
383 383  [[image:image-20221021111201-16.png||height="572" width="792"]]
384 384  
385 -
386 386  The payload is ASCII string, representative same HEX:
387 387  
388 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0c78__(% style="color:#00b0f0" %) __17__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__ (% style="color:#660066" %)__00__ (% style="color:#aaaa40" %)__000009__(% style="color:#663300" %) __000002__ (% style="color:#d60093" %)__6315537b__ (% style="color:#660066" %)__01 00000b 02 0000026 63510fed__ (%%)__0100000e0200000263510f39__ __010000000000000063510e85__ __010000000000000063510d2e__ __010000000000000063510c7a__ __010000000000000063510bc6__ __010000000000000063510954__ __010000000000000063510882 __**
280 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
389 389  
390 -**where:**
282 +where:
283 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
391 391  
392 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
285 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
393 393  
394 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
287 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
395 395  
396 -* (% style="color:#037691" %)**BAT :**(%%) 0x0c78 = 3192 mV = 3.192V
289 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
397 397  
398 -* (% style="color:#037691" %)**Singal: **(%%)0x17 = 23
291 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
399 399  
400 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
293 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00=0
401 401  
402 -* (% style="color:#037691" %)**Calculate Flag:**(%%) 0x00=0
295 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00=0
403 403  
404 -* (% style="color:#037691" %)**Contact Status:**(%%) 0x00=0
297 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
405 405  
406 -* (% style="color:#037691" %)**Alarm: **(%%)0x00 =0
299 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
407 407  
408 -* (% style="color:#037691" %)**Total pulse: **(%%)0x000009 =9
301 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
409 409  
410 -* (% style="color:#037691" %)**The last open duration: **(%%)0x000002 =2
303 +*(% style="color:#037691" %)** Time stamp :**(%%) 0x6315537b =1662342011 (Unix Time)
411 411  
412 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x6315537b =1662342011 (Unix Time)
305 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 01  00000b  02  000026  63510fed
413 413  
414 -* (% style="color:#037691" %)**Contact Status, Total pulse,The last open duration ,Time stamp :**(%%) 01  00000b  000026  63510fed
307 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
415 415  
416 -* (% style="color:#037691" %)**8 sets of recorded data: Contact Status, Total pulse, The last open duration ,Time stamp :**(%%) 0100000e00002663510f39,.......
417 417  
418 -== 2.4  Payload Explanation and Sensor Interface ==
310 +== **2.4  Payload Explanation and Sensor Interface** ==
419 419  
312 +=== **2.4.1  Device ID** ===
420 420  
421 -=== 2.4.1  Device ID ===
422 -
423 -
424 424  By default, the Device ID is equal to the last 15 bits of IMEI.
425 425  
426 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
316 +User can use **AT+DEUI** to set Device ID
427 427  
428 428  **Example:**
429 429  
... ... @@ -432,19 +432,15 @@
432 432  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
433 433  
434 434  
325 +=== **2.4.2  Version Info** ===
435 435  
436 -=== 2.4.2  Version Info ===
437 -
438 -
439 439  Specify the software version: 0x64=100, which means firmware version 1.00.
440 440  
441 441  For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
442 442  
443 443  
332 +=== **2.4.3  Battery Info** ===
444 444  
445 -=== 2.4.3  Battery Info ===
446 -
447 -
448 448  Check the battery voltage for CPN01.
449 449  
450 450  Ex1: 0x0B45 = 2885mV
... ... @@ -452,10 +452,8 @@
452 452  Ex2: 0x0B49 = 2889mV
453 453  
454 454  
341 +=== **2.4.4  Signal Strength** ===
455 455  
456 -=== 2.4.4  Signal Strength ===
457 -
458 -
459 459  NB-IoT Network signal Strength.
460 460  
461 461  **Ex1: 0x1d = 29**
... ... @@ -471,10 +471,8 @@
471 471  **99**    Not known or not detectable
472 472  
473 473  
358 +=== **2.4.5 Calculate Flag** ===
474 474  
475 -=== 2.4.5  Calculate Flag ===
476 -
477 -
478 478  The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
479 479  
480 480  User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
... ... @@ -484,35 +484,27 @@
484 484  Range (6 bits): (b)000000 ~~ (b) 111111
485 485  
486 486  
369 +=== **2.4.6  Alarm** ===
487 487  
488 -=== 2.4.6  Alarm ===
371 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
489 489  
490 490  
491 -See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
374 +=== **2.4.7 Contact Status** ===
492 492  
493 -
494 -
495 -=== 2.4.7  Contact Status ===
496 -
497 -
498 498  0: Open
499 499  
500 500  1: Close
501 501  
502 502  
381 +=== **2.4.8 Total pulse** ===
503 503  
504 -=== 2.4.8  Total pulse ===
383 +Total pulse/counting based on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
505 505  
506 -
507 -Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
508 -
509 509  Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
510 510  
511 511  
388 +=== **2.4.9 The last open duration** ===
512 512  
513 -=== 2.4.9  The last open duration ===
514 -
515 -
516 516  Dry Contact last open duration.
517 517  
518 518  Unit: min.
... ... @@ -520,10 +520,8 @@
520 520  [[image:image-20221021111346-17.png||height="146" width="770"]]
521 521  
522 522  
397 +=== **2.4.10  Timestamp** ===
523 523  
524 -=== 2.4.10  Timestamp ===
525 -
526 -
527 527  Timestamp : 0x6315537b =1662342011
528 528  
529 529  Convert Unix timestamp to time 2022-9-5 9:40:11.
... ... @@ -530,18 +530,15 @@
530 530  
531 531  **~ **
532 532  
405 +== **2.5  Downlink Payload** ==
533 533  
534 -== 2.5  Downlink Payload ==
535 -
536 -
537 537  By default, CPN01 prints the downlink payload to console port.
538 538  
539 539  [[image:image-20221021111414-18.png]] ​
540 540  
541 -
542 542  **Examples:**
543 543  
544 -* (% style="color:#037691" %)**Set TDC**
413 +* **Set TDC**
545 545  
546 546  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
547 547  
... ... @@ -549,19 +549,16 @@
549 549  
550 550  Payload:    01 00 00 3C    TDC=60S
551 551  
552 -* (% style="color:#037691" %)**Reset**
421 +* **Reset**
553 553  
554 554  If payload = 0x04FF, it will reset the NSE01
555 555  
556 -* (% style="color:#037691" %)**INTMOD**
425 +* **INTMOD**
557 557  
558 558  Downlink Payload: 06000003, Set AT+INTMOD=3
559 559  
429 +== **2.6  ​LED Indicator** ==
560 560  
561 -
562 -== 2.6  ​LED Indicator ==
563 -
564 -
565 565  The CPN01 has an internal LED which is to show the status of different states.
566 566  
567 567  * When the device starts normally, the LED will light up for 1 second.
... ... @@ -568,13 +568,12 @@
568 568  * After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
569 569  * For each uplink probe, LED will be on for 500ms.
570 570  
571 -== 2.7  Alarm Base on Timeout ==
437 +== **2.7  Alarm Base on Timeout** ==
572 572  
573 -
574 574  CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
575 575  
576 576  
577 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
442 +**~1. Keep Status: Status to be monitor**
578 578  
579 579  Keep Status = 1: Monitor Close to Open event
580 580  
... ... @@ -581,7 +581,7 @@
581 581  Keep Status = 0: Monitor Open to Close event
582 582  
583 583  
584 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
449 +**2. Keep Time: Timeout to send an Alarm**
585 585  
586 586  Range 0 ~~ 65535(0xFFFF) seconds.
587 587  
... ... @@ -590,108 +590,84 @@
590 590  If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
591 591  
592 592  
593 -(% style="color:blue" %)**AT Command to configure:**
458 +**AT Command** to configure:
594 594  
595 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
460 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
596 596  
597 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
462 +**AT+TTRIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
598 598  
599 599  
465 +== **2.8 Set debug mode** ==
600 600  
601 -== 2.8  Set debug mode ==
602 -
603 -
604 604  Feature: Enable or Disable debug mode
605 605  
606 -(% style="color:blue" %)**AT Command: AT+DEBUG**
607 607  
470 +**AT Command: AT+DEBUG**
471 +
608 608  [[image:image-20221021111629-21.png]]
609 609  
474 +== **2.9 Clear Flash Record** ==
610 610  
611 -
612 -== 2.9  Clear Flash Record ==
613 -
614 -
615 615  Feature: Clear flash storage for data log feature.
616 616  
617 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
478 +**AT Command: AT+CLRDTA**
618 618  
619 619  [[image:image-20221021111527-19.png]]
620 620  
482 +== ** 2.10 Set trigger mode** ==
621 621  
484 +➢ AT Command: **AT+TTRMOD**
622 622  
623 -== 2.10  Set trigger mode ==
624 -
625 -
626 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
627 -
628 628  Feature: Set the trigger interrupt mode.
629 629  
630 630  [[image:image-20221021111552-20.png]]
631 631  
490 +== **2.11 Set the calculate flag** ==
632 632  
633 -
634 -== 2.11  Set the calculate flag ==
635 -
636 -
637 637  Feature: Set the calculate flag
638 638  
639 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
494 +**AT Command: AT+CALCFLAG**
640 640  
641 641  [[image:image-20221021111711-22.png]]
642 642  
498 +== **2.12 Set count number** ==
643 643  
644 -
645 -== 2.12 Set count number ==
646 -
647 -
648 648  Feature: Manually set the count number
649 649  
650 -(% style="color:blue" %)**AT Command: AT+SETCNT**
502 +**AT Command: AT+SETCNT**
651 651  
652 652  [[image:image-20221021111748-24.png]]
653 653  
506 +== **2.13 Set the number of data to be uploaded and the recording time** ==
654 654  
508 +➢ AT Command:
655 655  
656 -== 2.13  Set the number of data to be uploaded and the recording time ==
510 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
657 657  
658 658  
659 -(% style="color:blue" %)**AT Command:**
513 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
660 660  
661 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
515 +== **2.14 Read or Clear cached data** ==
662 662  
663 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
517 +➢ AT Command:
664 664  
519 +AT+CDP    ~/~/ Read cached data
665 665  
666 -
667 -== 2.14  Read or Clear cached data ==
668 -
669 -
670 -(% style="color:blue" %)**AT Command:**
671 -
672 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
673 -
674 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
675 -
676 676  [[image:image-20221021111810-25.png||height="364" width="797"]]
677 677  
678 678  
524 +AT+CDP=0    ~/~/ Clear cached data ​
679 679  
680 -== 2.15  ​Firmware Change Log ==
526 +== **2.15  ​Firmware Change Log** ==
681 681  
528 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
682 682  
683 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
530 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
684 684  
685 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
532 +== **2.16  ​Battery Analysis** ==
686 686  
534 +=== **2.16.1  ​Battery Type** ===
687 687  
688 -
689 -== 2.16  ​Battery Analysis ==
690 -
691 -
692 -=== 2.16.1  ​Battery Type ===
693 -
694 -
695 695  The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
696 696  
697 697  The battery is designed to last for several years depends on the actual use environment and update interval. 
... ... @@ -699,55 +699,40 @@
699 699  The battery-related documents as below:
700 700  
701 701  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
702 -
703 703  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
704 -
705 705  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
706 706  
707 707  [[image:image-20221021111911-26.png]] ​
708 708  
548 +=== **2.16.2  Power consumption Analyze** ===
709 709  
710 -
711 -=== 2.16.2  Power consumption Analyze ===
712 -
713 -
714 714  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
715 715  
716 716  Instruction to use as below:
717 717  
718 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
554 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
719 719  
720 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
556 +**Step 2: ** Open it and choose
721 721  
722 722  * Product Model
723 -
724 724  * Uplink Interval
725 -
726 726  * Working Mode
727 727  
728 728  And the Life expectation in difference case will be shown on the right.
729 729  
730 -[[image:1666596205057-567.png]] ​
564 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
731 731  
566 +=== **2.16.3  ​Battery Note** ===
732 732  
733 -
734 -=== 2.16.3  ​Battery Note ===
735 -
736 -
737 737  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
738 738  
570 +=== **2.16.4  Replace the battery** ===
739 739  
740 -
741 -=== 2.16.4  Replace the battery ===
742 -
743 -
744 744  The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
745 745  
746 746  
575 += **3. ​ Access NB-IoT Module** =
747 747  
748 -= 3. ​ Access NB-IoT Module =
749 -
750 -
751 751  Users can directly access the AT command set of the NB-IoT module.
752 752  
753 753  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
... ... @@ -754,14 +754,10 @@
754 754  
755 755  [[image:image-20221021112006-28.png]] ​
756 756  
583 += **4.  Using the AT Commands** =
757 757  
585 +== **4.1  Access AT Commands** ==
758 758  
759 -= 4.  Using the AT Commands =
760 -
761 -
762 -== 4.1  Access AT Commands ==
763 -
764 -
765 765  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
766 766  
767 767  AT+<CMD>?  : Help on <CMD>
... ... @@ -772,9 +772,8 @@
772 772  
773 773  AT+<CMD>=?  : Get the value
774 774  
597 +**General Commands**      
775 775  
776 -(% style="color:blue" %)**General Commands**      
777 -
778 778  AT  : Attention       
779 779  
780 780  AT?  : Short Help     
... ... @@ -797,12 +797,15 @@
797 797  
798 798  AT+SERVADDR  : Server Address
799 799  
800 -AT+TR      :  Get or Set record time
621 +AT+TR      : Get or Set record time"
801 801  
623 +
802 802  AT+NOUD      : Get or Set the number of data to be uploaded
803 803  
804 -AT+CDP     :  Read or Clear cached data
805 805  
627 +AT+CDP     : Read or Clear cached data
628 +
629 +
806 806  AT+ DEBUG   : Enable or Disable debug mode
807 807  
808 808  AT+ TTRIG   : Get or Set Alarm Base on Timeout
... ... @@ -813,19 +813,16 @@
813 813  
814 814  AT+ CLRC   : Clear current door open count
815 815  
640 +**COAP Management**      
816 816  
817 -(% style="color:blue" %)**COAP Management**      
818 -
819 819  AT+URI            : Resource parameters
820 820  
644 +**UDP Management**
821 821  
822 -(% style="color:blue" %)**UDP Management**
823 -
824 824  AT+CFM          : Upload confirmation mode (only valid for UDP)
825 825  
648 +**MQTT Management**
826 826  
827 -(% style="color:blue" %)**MQTT Management**
828 -
829 829  AT+CLIENT               : Get or Set MQTT client
830 830  
831 831  AT+UNAME  : Get or Set MQTT Username
... ... @@ -836,71 +836,86 @@
836 836  
837 837  AT+SUBTOPIC  : Get or Set MQTT subscription topic
838 838  
660 +**Information**          
839 839  
840 -(% style="color:blue" %)**Information**          
841 -
842 842  AT+FDR  : Factory Data Reset
843 843  
844 844  AT+PWORD  : Serial Access Password
845 845  
666 += **​5.  FAQ** =
846 846  
668 +== **5.1 ​ How to Upgrade Firmware** ==
847 847  
848 -= ​5.  FAQ =
670 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
849 849  
672 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
850 850  
851 -== 5.1 ​ How to Upgrade Firmware ==
674 +**Notice, **CPN01 **and **CPL01 **share the same mother board. They use the same connection and method to update.**
852 852  
853 853  
854 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
677 += **6.  Trouble Shooting** =
855 855  
856 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
679 +== **6.1  ​Connection problem when uploading firmware** ==
857 857  
858 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
681 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
859 859  
860 860  
684 +== **6.2  AT Command input doesn't work** ==
861 861  
862 -= 6.  Trouble Shooting =
686 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
863 863  
864 864  
865 -== 6.1  ​Connection problem when uploading firmware ==
689 += **7. ​ Order Info** =
866 866  
691 +Part Number**:** CPN01
867 867  
868 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
869 869  
694 += **8.  Packing Info** =
870 870  
696 +**Package Includes**:
871 871  
872 -== 6.2  AT Command input doesn't work ==
698 +* CPN01 Open/Close Sensor x 1
699 +* External antenna x 1
873 873  
701 +**Dimension and weight**:
874 874  
875 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
703 +* Size: 195 x 125 x 55 mm
704 +* Weight:   420g
876 876  
706 += **9.  Support** =
877 877  
708 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
709 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
878 878  
879 -= 7. ​ Order Info =
711 +​
880 880  
881 881  
882 -Part Number**:** CPN01
883 883  
884 884  
885 885  
886 -= 8.  Packing Info =
887 887  
888 888  
889 -(% style="color:blue" %)**Package Includes**:
890 890  
891 -* CPN01 Open/Close Sensor x 1
892 -* External antenna x 1
893 893  
894 -(% style="color:blue" %)**Dimension and weight**:
895 895  
896 -* Size: 195 x 125 x 55 mm
897 -* Weight:   420g
898 898  
899 -= 9.  Support =
900 900  
901 901  
902 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
903 903  
904 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
905 905  
906 -​
727 +
728 +
729 +
730 +
731 +
732 +
733 +
734 +
735 +
736 +
737 +
738 +
739 +
740 +
741 +
742 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0