Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 53.2 >
edited by Xiaoling
on 2022/11/17 11:08
To version < 45.1 >
edited by David Huang
on 2022/10/24 09:16
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,49 +1,29 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20221117105556-1.png]]
2 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 +{{toc/}}
4 4  
6 += **1. Introduction** =
5 5  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
6 6  
10 +The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
7 7  
12 +The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
8 8  
14 +CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
9 9  
10 -**Table of Contents：**
16 +CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
11 11  
12 -
13 -
14 -
15 -
16 -= 1.  Introduction =
17 -
18 -
19 -== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
20 -
21 -
22 -(((
23 -The Dragino NDS03A is an Open/Close NB-IoT Door Sensor. It detects door open/close status and uplinks to IoT server via NB-IoT network. NDS03A can connect two door sensors.user can see the door status, open duration, open counts in the IoT Server.
24 -
25 -The NDS03A will send periodically data every 4 hours as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
26 -
27 -NDS03A has a Datalog feature, it will record the open/close event and the user can retrieve the history from NB-IoT.
28 -
29 -NDS03A has the open alarm feature, user can set this feature so the device will send an alarm if the door has been open for a certain time.
30 -
31 -NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
32 -)))
33 -
34 -(((
35 35  NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
36 36  \\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
37 37  \\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
38 38  \\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
39 -)))
40 40  
41 41  ​
42 42  
25 +== **​1.2 Features** ==
43 43  
44 -== ​1.2  Features ==
45 -
46 -
47 47  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
48 48  * Open/Close detect
49 49  * Open/Close statistics
... ... @@ -59,16 +59,14 @@
59 59  * Micro SIM card slot for NB-IoT SIM
60 60  * 8500mAh Battery for long-term use
61 61  
42 +== **1.3  Specification** ==
62 62  
63 -== 1.3  Specification ==
44 +**Common DC Characteristics:**
64 64  
65 -
66 -(% style="color:blue" %)**Common DC Characteristics:**
67 -
68 68  * Supply Voltage: 2.1v ~~ 3.6v
69 69  * Operating Temperature: -40 ~~ 85°C
70 70  
71 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
72 72  
73 73  * - B1 @H-FDD: 2100MHz
74 74  * - B3 @H-FDD: 1800MHz
... ... @@ -77,101 +77,76 @@
77 77  * - B20 @H-FDD: 800MHz
78 78  * - B28 @H-FDD: 700MHz
79 79  
58 +== **1.4 Installation** ==
80 80  
81 -== 1.4  Installation ==
82 -
83 -
84 84  Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
85 85  
86 86  [[image:image-20221021110329-1.png]]
87 87  
88 -
89 89  [[image:image-20221022234602-2.png||height="288" width="922"]]
90 90  
91 91  
67 +== **1.5 ​Applications** ==
92 92  
93 -== 1.5 ​ Applications ==
94 -
95 -
96 96  * Open/Close Detection
97 97  * Pulse meter application
98 98  * Dry Contact Detection
99 99  
73 +== **1.6 Mechanical** ==
100 100  
101 -== 1.6  Mechanical ==
102 -
103 -
104 104  ​[[image:image-20221021110415-3.png]]
105 105  
77 +== ** 1.7 Pin Definitions and Switch** ==
106 106  
107 -
108 -== 1.7  Pin Definitions and Switch ==
109 -
110 -
111 111  [[image:image-20221021110429-4.png]]
112 112  
81 +=== **1.7.1 Pin Definition** ===
113 113  
114 -=== 1.7.1  Pin Definition ===
115 -
116 -
117 117  CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
118 118  
119 119  
86 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
120 120  
121 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
122 -
123 -
124 124  Power on Device when putting this jumper.
125 125  
126 126  
91 +=== **1.7.3 BOOT MODE / SW1** ===
127 127  
128 -=== 1.7.3  BOOT MODE / SW1 ===
129 129  
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
130 130  
131 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
96 +2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
132 132  
133 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
134 134  
99 +=== **1.7.4 Reset Button** ===
135 135  
136 136  
137 -=== 1.7.4  Reset Button ===
138 -
139 -
140 140  Press to reboot the device.
141 141  
142 142  
105 +=== **1.7.5 LED** ===
143 143  
144 -=== 1.7.5  LED ===
145 145  
146 -
147 147  The LED will blink when :
148 148  
149 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
150 150  
151 -2.  Send an uplink packet
113 += **2.  Use CPN01 to communicate with IoT Server** =
152 152  
115 +== **2.1  How it works** ==
153 153  
117 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
154 154  
155 -= 2.  Use CPN01 to communicate with IoT Server =
156 -
157 -
158 -== 2.1  How it works ==
159 -
160 -
161 -The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get (% style="color:blue" %)**Open/Close Event or Count**(%%) from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
162 -
163 163  The diagram below shows the working flow in the default firmware of CPN01:
164 164  
165 165  [[image:image-20221021110615-5.png]]
166 166  
167 167  
124 +== **2.2 ​ Configure CPN01** ==
168 168  
169 -== 2.2 ​ Configure CPN01 ==
126 +=== **2.2.1 Test Requirement** ===
170 170  
171 -
172 -=== 2.2.1 Test Requirement ===
173 -
174 -
175 175  To use CPN01 in your city, make sure to meet below requirements:
176 176  
177 177  * Your local operator has already distributed an NB-IoT Network.
... ... @@ -178,16 +178,14 @@
178 178  * The local NB-IoT network used the band that CPN01 supports.
179 179  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
180 180  
181 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
182 182  
183 183  [[image:image-20221023000439-3.png]]
184 184  
185 185   ​
186 186  
140 +=== **2.2.2 Insert NB-IoT SIM card** ===
187 187  
188 -=== 2.2.2 Insert NB-IoT SIM card ===
189 -
190 -
191 191  Insert the NB-IoT Card get from your provider.
192 192  
193 193  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -195,33 +195,26 @@
195 195  [[image:image-20221021110745-6.png]] ​
196 196  
197 197  
149 +=== **2.2.3 Connect USB – TTL to CPN01 and configure it** ===
198 198  
199 -=== 2.2.3 Connect USB – TTL to CPN01 and configure it ===
151 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
200 200  
153 +**Connection:**
201 201  
202 -User need to configure CPN01 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
155 + USB TTL GND <~-~-~-~-> GND
203 203  
204 -(% style="color:blue" %)**Connection:**
157 + USB TTL TXD <~-~-~-~-> UART_RXD
205 205  
206 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
159 + USB TTL RXD <~-~-~-~-> UART_TXD
207 207  
208 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
209 -
210 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
211 -
212 -
213 213  In the PC, use below serial tool settings:
214 214  
215 -* Baud:  (% style="color:red" %)**9600**
163 +* Baud:  **9600**
164 +* Data bits:** 8**
165 +* Stop bits: **1**
166 +* Parity:  **None**
167 +* Flow Control: **None**
216 216  
217 -* Data bits:** (% style="color:red" %)8(%%)**
218 -
219 -* Stop bits: (% style="color:red" %)**1**
220 -
221 -* Parity:  (% style="color:red" %)**None**
222 -
223 -* Flow Control: (% style="color:red" %)**None**
224 -
225 225  Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
226 226  
227 227  ​[[image:image-20221021110817-7.png]]
... ... @@ -229,93 +229,74 @@
229 229  CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
230 230  
231 231  
232 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
233 233  
234 234  
179 +=== **2.2.4 Use CoAP protocol to uplink data** ===
235 235  
236 -=== 2.2.4 Use CoAP protocol to uplink data ===
181 +**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
237 237  
238 238  
239 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
184 +**Use below commands in CPN01:**
240 240  
186 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
187 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ Set CoAP server address and port
188 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set CoAP resource path
241 241  
242 -(% style="color:blue" %)**Use below commands in CPN01:**
243 -
244 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
245 -
246 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
247 -
248 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
249 -
250 250  For parameter description, please refer to AT command set
251 251  
252 252  [[image:image-20221021110948-8.png]]
253 253  
254 254  
255 -After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
195 +After configuring the server address and **reset CPN01** (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
256 256  
257 257  [[image:image-20221021110956-9.png]] ​
258 258  
259 259  
200 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
260 260  
261 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
262 262  
203 +**AT Commands:**
263 263  
264 -(% style="color:blue" %)**AT Commands:**
205 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
206 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ Set UDP server address and port
207 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
265 265  
266 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
267 -
268 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
269 -
270 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
271 -
272 272  ​ [[image:image-20221021111025-10.png]]
273 273  
274 -
275 275  [[image:image-20221021111033-11.png||height="241" width="576"]]
276 276  
277 277  ​
278 278  
215 +=== **2.2.6 Use MQTT protocol to uplink data** ===
279 279  
280 -=== 2.2.6 Use MQTT protocol to uplink data ===
281 281  
218 +**AT Commands:**
282 282  
283 -(% style="color:blue" %)**AT Commands:**
220 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
221 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
222 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
223 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
224 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
225 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
226 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
284 284  
285 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
286 -
287 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
288 -
289 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
290 -
291 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
292 -
293 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
294 -
295 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
296 -
297 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
298 -
299 299  ​ [[image:image-20221021111058-12.png]]
300 300  
230 +[[image:image-20221021111108-13.png]]
301 301  
302 -[[image:image-20221021111201-16.png||height="472" width="653"]]
303 -
304 304  ​
305 305  
306 306  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
307 307  
308 308  
237 +=== **2.2.7 Use TCP protocol to uplink data** ===
309 309  
310 -=== 2.2.7 Use TCP protocol to uplink data ===
239 +**AT Commands**
311 311  
241 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
242 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ Set TCP server address and port
312 312  
313 -(% style="color:blue" %)**AT Commands:**
314 -
315 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
316 -
317 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
318 -
319 319  ​ [[image:image-20221021111125-14.png]]
320 320  
321 321  [[image:image-20221021111131-15.png]]
... ... @@ -322,82 +322,73 @@
322 322  
323 323  ​
324 324  
250 +=== **2.2.8 Change Update Interval** ===
325 325  
326 -=== 2.2.8 Change Update Interval ===
252 +User can use below command to change the **uplink interval**.
327 327  
254 +* **AT+TDC=7200      ** ~/~/ Set Update Interval to 7200s (2 hours)
328 328  
329 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
256 +**NOTE:**
330 330  
331 -* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (2 hours)
258 +**~1. By default, the device will send an uplink message every 1 hour.**
332 332  
333 -(% style="color:red" %)**NOTE:**
334 334  
335 -1.  By default, the device will send an uplink message every 1 hour.
261 +== **2.3  Uplink Payload** ==
336 336  
337 -
338 -
339 -== 2.3  Uplink Payload ==
340 -
341 -
342 342  The uplink payload includes 123 bytes in total by default.
343 343  
344 344  Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
345 345  
267 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**1**|**1**|**3**
268 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[ Calculate Flag>>path:#H2.4.8A0DigitalInterrupt]]|Contact Status|Alarm|Total pulse
346 346  
347 -(% border="1.5" style="background-color:#ffffcc; color:green; width:510px" %)
348 -|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:40px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:60px" %)**3**
349 -|=(% style="width: 96px;" %)**Value**|(% style="width:84px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:44px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:121px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:52px" %)MOD|(% style="width:84px" %)[[ Calculate Flag>>||anchor="H2.4.5A0CalculateFlag"]]|(% style="width:116px" %)[[Contact Status>>||anchor="H2.4.7A0ContactStatus"]]|(% style="width:57px" %)[[Alarm>>||anchor="H2.4.6A0Alarm"]]|(% style="width:91px" %)[[Total pulse>>||anchor="H2.4.8A0Totalpulse"]]
270 +(% style="width:1201px" %)
271 +|**3**|**4**|**1**|**3**|**1**|**3**|4|**8 group**|(% style="width:1px" %)
272 +|The last open duration|Time stamp|Contact Status|Total pulse|Calculate Flag|The last open duration|Time stamp|...|(% style="width:1px" %)
350 350  
351 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
352 -|(% style="width:100px" %)**3**|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:100px" %)**3**|(% style="width:80px" %)4|(% style="width:50px" %)**8 group**
353 -|(% style="width:176px" %)[[The last open duration>>||anchor="H2.4.9A0Thelastopenduration"]]|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Contact Status|(% style="width:92px" %)Total pulse|(% style="width:169px" %)The last open duration|(% style="width:97px" %)Time stamp|(% style="width:74px" %)...
354 -
355 355  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
356 356  
357 357  [[image:image-20221021111201-16.png||height="572" width="792"]]
358 358  
359 -
360 360  The payload is ASCII string, representative same HEX:
361 361  
362 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0c78__(% style="color:#00b0f0" %) __17__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__ (% style="color:#660066" %)__00__ (% style="color:#aaaa40" %)__000009__(% style="color:#663300" %) __000002__ (% style="color:#d60093" %)__6315537b__ (% style="color:#660066" %)__01 00000b 02 0000026 63510fed__ (%%)__0100000e0200000263510f39__ __010000000000000063510e85__ __010000000000000063510d2e__ __010000000000000063510c7a__ __010000000000000063510bc6__ __010000000000000063510954__ __010000000000000063510882 __**
280 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
363 363  
364 -**where:**
282 +where:
283 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
365 365  
366 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
285 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
367 367  
368 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
287 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
369 369  
370 -* (% style="color:#037691" %)**BAT :**(%%) 0x0c78 = 3192 mV = 3.192V
289 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
371 371  
372 -* (% style="color:#037691" %)**Singal: **(%%)0x17 = 23
291 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
373 373  
374 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
293 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00=0
375 375  
376 -* (% style="color:#037691" %)**Calculate Flag:**(%%) 0x00=0
295 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00=0
377 377  
378 -* (% style="color:#037691" %)**Contact Status:**(%%) 0x00=0
297 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
379 379  
380 -* (% style="color:#037691" %)**Alarm: **(%%)0x00 =0
299 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
381 381  
382 -* (% style="color:#037691" %)**Total pulse: **(%%)0x000009 =9
301 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
383 383  
384 -* (% style="color:#037691" %)**The last open duration: **(%%)0x000002 =2
303 +*(% style="color:#037691" %)** Time stamp :**(%%) 0x6315537b =1662342011 (Unix Time)
385 385  
386 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x6315537b =1662342011 (Unix Time)
305 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 01  00000b  02  000026  63510fed
387 387  
388 -* (% style="color:#037691" %)**Contact Status, Total pulse,The last open duration ,Time stamp :**(%%) 01  00000b  000026  63510fed
307 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
389 389  
390 -* (% style="color:#037691" %)**8 sets of recorded data: Contact Status, Total pulse, The last open duration ,Time stamp :**(%%) 0100000e00002663510f39,.......
391 391  
392 -== 2.4  Payload Explanation and Sensor Interface ==
310 +== **2.4  Payload Explanation and Sensor Interface** ==
393 393  
312 +=== **2.4.1  Device ID** ===
394 394  
395 -=== 2.4.1  Device ID ===
396 -
397 -
398 398  By default, the Device ID is equal to the last 15 bits of IMEI.
399 399  
400 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
316 +User can use **AT+DEUI** to set Device ID
401 401  
402 402  **Example:**
403 403  
... ... @@ -406,19 +406,15 @@
406 406  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
407 407  
408 408  
325 +=== **2.4.2  Version Info** ===
409 409  
410 -=== 2.4.2  Version Info ===
411 -
412 -
413 413  Specify the software version: 0x64=100, which means firmware version 1.00.
414 414  
415 415  For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
416 416  
417 417  
332 +=== **2.4.3  Battery Info** ===
418 418  
419 -=== 2.4.3  Battery Info ===
420 -
421 -
422 422  Check the battery voltage for CPN01.
423 423  
424 424  Ex1: 0x0B45 = 2885mV
... ... @@ -426,10 +426,8 @@
426 426  Ex2: 0x0B49 = 2889mV
427 427  
428 428  
341 +=== **2.4.4  Signal Strength** ===
429 429  
430 -=== 2.4.4  Signal Strength ===
431 -
432 -
433 433  NB-IoT Network signal Strength.
434 434  
435 435  **Ex1: 0x1d = 29**
... ... @@ -445,10 +445,8 @@
445 445  **99**    Not known or not detectable
446 446  
447 447  
358 +=== **2.4.5 Calculate Flag** ===
448 448  
449 -=== 2.4.5  Calculate Flag ===
450 -
451 -
452 452  The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
453 453  
454 454  User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
... ... @@ -458,35 +458,27 @@
458 458  Range (6 bits): (b)000000 ~~ (b) 111111
459 459  
460 460  
369 +=== **2.4.6  Alarm** ===
461 461  
462 -=== 2.4.6  Alarm ===
371 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
463 463  
464 464  
465 -See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
374 +=== **2.4.7 Contact Status** ===
466 466  
467 -
468 -
469 -=== 2.4.7  Contact Status ===
470 -
471 -
472 472  0: Open
473 473  
474 474  1: Close
475 475  
476 476  
381 +=== **2.4.8 Total pulse** ===
477 477  
478 -=== 2.4.8  Total pulse ===
383 +Total pulse/counting based on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
479 479  
480 -
481 -Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
482 -
483 483  Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
484 484  
485 485  
388 +=== **2.4.9 The last open duration** ===
486 486  
487 -=== 2.4.9  The last open duration ===
488 -
489 -
490 490  Dry Contact last open duration.
491 491  
492 492  Unit: min.
... ... @@ -494,10 +494,8 @@
494 494  [[image:image-20221021111346-17.png||height="146" width="770"]]
495 495  
496 496  
397 +=== **2.4.10  Timestamp** ===
497 497  
498 -=== 2.4.10  Timestamp ===
499 -
500 -
501 501  Timestamp : 0x6315537b =1662342011
502 502  
503 503  Convert Unix timestamp to time 2022-9-5 9:40:11.
... ... @@ -504,18 +504,15 @@
504 504  
505 505  **~ **
506 506  
405 +== **2.5  Downlink Payload** ==
507 507  
508 -== 2.5  Downlink Payload ==
509 -
510 -
511 511  By default, CPN01 prints the downlink payload to console port.
512 512  
513 513  [[image:image-20221021111414-18.png]] ​
514 514  
515 -
516 516  **Examples:**
517 517  
518 -* (% style="color:#037691" %)**Set TDC**
413 +* **Set TDC**
519 519  
520 520  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
521 521  
... ... @@ -523,19 +523,16 @@
523 523  
524 524  Payload:    01 00 00 3C    TDC=60S
525 525  
526 -* (% style="color:#037691" %)**Reset**
421 +* **Reset**
527 527  
528 528  If payload = 0x04FF, it will reset the NSE01
529 529  
530 -* (% style="color:#037691" %)**INTMOD**
425 +* **INTMOD**
531 531  
532 532  Downlink Payload: 06000003, Set AT+INTMOD=3
533 533  
429 +== **2.6  ​LED Indicator** ==
534 534  
535 -
536 -== 2.6  ​LED Indicator ==
537 -
538 -
539 539  The CPN01 has an internal LED which is to show the status of different states.
540 540  
541 541  * When the device starts normally, the LED will light up for 1 second.
... ... @@ -542,13 +542,12 @@
542 542  * After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
543 543  * For each uplink probe, LED will be on for 500ms.
544 544  
545 -== 2.7  Alarm Base on Timeout ==
437 +== **2.7  Alarm Base on Timeout** ==
546 546  
547 -
548 548  CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
549 549  
550 550  
551 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
442 +**~1. Keep Status: Status to be monitor**
552 552  
553 553  Keep Status = 1: Monitor Close to Open event
554 554  
... ... @@ -555,7 +555,7 @@
555 555  Keep Status = 0: Monitor Open to Close event
556 556  
557 557  
558 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
449 +**2. Keep Time: Timeout to send an Alarm**
559 559  
560 560  Range 0 ~~ 65535(0xFFFF) seconds.
561 561  
... ... @@ -564,108 +564,84 @@
564 564  If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
565 565  
566 566  
567 -(% style="color:blue" %)**AT Command to configure:**
458 +**AT Command** to configure:
568 568  
569 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
460 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
570 570  
571 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
462 +**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
572 572  
573 573  
465 +== **2.8 Set debug mode** ==
574 574  
575 -== 2.8  Set debug mode ==
576 -
577 -
578 578  Feature: Enable or Disable debug mode
579 579  
580 -(% style="color:blue" %)**AT Command: AT+DEBUG**
581 581  
470 +**AT Command: AT+DEBUG**
471 +
582 582  [[image:image-20221021111629-21.png]]
583 583  
474 +== **2.9 Clear Flash Record** ==
584 584  
585 -
586 -== 2.9  Clear Flash Record ==
587 -
588 -
589 589  Feature: Clear flash storage for data log feature.
590 590  
591 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
478 +**AT Command: AT+CLRDTA**
592 592  
593 593  [[image:image-20221021111527-19.png]]
594 594  
482 +== ** 2.10 Set trigger mode** ==
595 595  
484 +➢ AT Command: **AT+TTRMOD**
596 596  
597 -== 2.10  Set trigger mode ==
598 -
599 -
600 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
601 -
602 602  Feature: Set the trigger interrupt mode.
603 603  
604 604  [[image:image-20221021111552-20.png]]
605 605  
490 +== **2.11 Set the calculate flag** ==
606 606  
607 -
608 -== 2.11  Set the calculate flag ==
609 -
610 -
611 611  Feature: Set the calculate flag
612 612  
613 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
494 +**AT Command: AT+CALCFLAG**
614 614  
615 615  [[image:image-20221021111711-22.png]]
616 616  
498 +== **2.12 Set count number** ==
617 617  
618 -
619 -== 2.12 Set count number ==
620 -
621 -
622 622  Feature: Manually set the count number
623 623  
624 -(% style="color:blue" %)**AT Command: AT+SETCNT**
502 +**AT Command: AT+SETCNT**
625 625  
626 626  [[image:image-20221021111748-24.png]]
627 627  
506 +== **2.13 Set the number of data to be uploaded and the recording time** ==
628 628  
508 +➢ AT Command:
629 629  
630 -== 2.13  Set the number of data to be uploaded and the recording time ==
510 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
631 631  
632 632  
633 -(% style="color:blue" %)**AT Command:**
513 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
634 634  
635 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
515 +== **2.14 Read or Clear cached data** ==
636 636  
637 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
517 +➢ AT Command:
638 638  
519 +AT+CDP    ~/~/ Read cached data
639 639  
640 -
641 -== 2.14  Read or Clear cached data ==
642 -
643 -
644 -(% style="color:blue" %)**AT Command:**
645 -
646 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
647 -
648 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
649 -
650 650  [[image:image-20221021111810-25.png||height="364" width="797"]]
651 651  
652 652  
524 +AT+CDP=0    ~/~/ Clear cached data ​
653 653  
654 -== 2.15  ​Firmware Change Log ==
526 +== **2.15  ​Firmware Change Log** ==
655 655  
528 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
656 656  
657 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
530 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
658 658  
659 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
532 +== **2.16  ​Battery Analysis** ==
660 660  
534 +=== **2.16.1  ​Battery Type** ===
661 661  
662 -
663 -== 2.16  ​Battery Analysis ==
664 -
665 -
666 -=== 2.16.1  ​Battery Type ===
667 -
668 -
669 669  The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
670 670  
671 671  The battery is designed to last for several years depends on the actual use environment and update interval. 
... ... @@ -673,55 +673,40 @@
673 673  The battery-related documents as below:
674 674  
675 675  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
676 -
677 677  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
678 -
679 679  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
680 680  
681 681  [[image:image-20221021111911-26.png]] ​
682 682  
548 +=== **2.16.2  Power consumption Analyze** ===
683 683  
684 -
685 -=== 2.16.2  Power consumption Analyze ===
686 -
687 -
688 688  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
689 689  
690 690  Instruction to use as below:
691 691  
692 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
554 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
693 693  
694 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
556 +**Step 2: ** Open it and choose
695 695  
696 696  * Product Model
697 -
698 698  * Uplink Interval
699 -
700 700  * Working Mode
701 701  
702 702  And the Life expectation in difference case will be shown on the right.
703 703  
704 -[[image:1666596205057-567.png]] ​
564 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
705 705  
566 +=== **2.16.3  ​Battery Note** ===
706 706  
707 -
708 -=== 2.16.3  ​Battery Note ===
709 -
710 -
711 711  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
712 712  
570 +=== **2.16.4  Replace the battery** ===
713 713  
714 -
715 -=== 2.16.4  Replace the battery ===
716 -
717 -
718 718  The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
719 719  
720 720  
575 += **3. ​ Access NB-IoT Module** =
721 721  
722 -= 3. ​ Access NB-IoT Module =
723 -
724 -
725 725  Users can directly access the AT command set of the NB-IoT module.
726 726  
727 727  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
... ... @@ -728,14 +728,10 @@
728 728  
729 729  [[image:image-20221021112006-28.png]] ​
730 730  
583 += **4.  Using the AT Commands** =
731 731  
585 +== **4.1  Access AT Commands** ==
732 732  
733 -= 4.  Using the AT Commands =
734 -
735 -
736 -== 4.1  Access AT Commands ==
737 -
738 -
739 739  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
740 740  
741 741  AT+<CMD>?  : Help on <CMD>
... ... @@ -746,9 +746,8 @@
746 746  
747 747  AT+<CMD>=?  : Get the value
748 748  
597 +**General Commands**      
749 749  
750 -(% style="color:blue" %)**General Commands**      
751 -
752 752  AT  : Attention       
753 753  
754 754  AT?  : Short Help     
... ... @@ -771,12 +771,15 @@
771 771  
772 772  AT+SERVADDR  : Server Address
773 773  
774 -AT+TR      :  Get or Set record time
621 +AT+TR      : Get or Set record time"
775 775  
623 +
776 776  AT+NOUD      : Get or Set the number of data to be uploaded
777 777  
778 -AT+CDP     :  Read or Clear cached data
779 779  
627 +AT+CDP     : Read or Clear cached data
628 +
629 +
780 780  AT+ DEBUG   : Enable or Disable debug mode
781 781  
782 782  AT+ TTRIG   : Get or Set Alarm Base on Timeout
... ... @@ -787,19 +787,16 @@
787 787  
788 788  AT+ CLRC   : Clear current door open count
789 789  
640 +**COAP Management**      
790 790  
791 -(% style="color:blue" %)**COAP Management**      
792 -
793 793  AT+URI            : Resource parameters
794 794  
644 +**UDP Management**
795 795  
796 -(% style="color:blue" %)**UDP Management**
797 -
798 798  AT+CFM          : Upload confirmation mode (only valid for UDP)
799 799  
648 +**MQTT Management**
800 800  
801 -(% style="color:blue" %)**MQTT Management**
802 -
803 803  AT+CLIENT               : Get or Set MQTT client
804 804  
805 805  AT+UNAME  : Get or Set MQTT Username
... ... @@ -810,72 +810,86 @@
810 810  
811 811  AT+SUBTOPIC  : Get or Set MQTT subscription topic
812 812  
660 +**Information**          
813 813  
814 -(% style="color:blue" %)**Information**          
815 -
816 816  AT+FDR  : Factory Data Reset
817 817  
818 818  AT+PWORD  : Serial Access Password
819 819  
666 += **​5.  FAQ** =
820 820  
668 +== **5.1 ​ How to Upgrade Firmware** ==
821 821  
822 -= ​5.  FAQ =
670 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
823 823  
672 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
824 824  
825 -== 5.1 ​ How to Upgrade Firmware ==
674 +**Notice, **CPN01 **and **CPL01 **share the same mother board. They use the same connection and method to update.**
826 826  
827 827  
828 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
677 += **6.  Trouble Shooting** =
829 829  
830 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
679 +== **6.1  ​Connection problem when uploading firmware** ==
831 831  
832 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
681 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
833 833  
834 834  
684 +== **6.2  AT Command input doesn't work** ==
835 835  
836 -= 6.  Trouble Shooting =
686 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
837 837  
838 838  
839 -== 6.1  ​Connection problem when uploading firmware ==
689 += **7. ​ Order Info** =
840 840  
691 +Part Number**:** CPN01
841 841  
842 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
843 843  
694 += **8.  Packing Info** =
844 844  
696 +**Package Includes**:
845 845  
846 -== 6.2  AT Command input doesn't work ==
698 +* CPN01 Open/Close Sensor x 1
699 +* External antenna x 1
847 847  
701 +**Dimension and weight**:
848 848  
849 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
703 +* Size: 195 x 125 x 55 mm
704 +* Weight:   420g
850 850  
706 += **9.  Support** =
851 851  
708 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
709 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
852 852  
853 -= 7. ​ Order Info =
711 +​
854 854  
855 855  
856 -Part Number**:** CPN01
857 857  
858 858  
859 859  
860 -= 8.  Packing Info =
861 861  
862 862  
863 -(% style="color:blue" %)**Package Includes**:
864 864  
865 -* CPN01 Open/Close Sensor x 1
866 -* External antenna x 1
867 867  
868 -(% style="color:blue" %)**Dimension and weight**:
869 869  
870 -* Size: 195 x 125 x 55 mm
871 -* Weight:   420g
872 872  
873 873  
874 -= 9.  Support =
875 875  
876 876  
877 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
878 878  
879 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
880 880  
881 -​
728 +
729 +
730 +
731 +
732 +
733 +
734 +
735 +
736 +
737 +
738 +
739 +
740 +
741 +
742 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -133.3 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0