Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 52.8 >
edited by Xiaoling
on 2022/11/17 10:52
To version < 46.1 >
edited by David Huang
on 2022/10/24 10:18
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
1 +CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.David
Content
... ... @@ -1,51 +1,29 @@
1 1  (% style="text-align:center" %)
2 2  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
3 3  
4 -
5 -
6 -**Table of Contents：**
7 -
8 8  {{toc/}}
9 9  
6 += **1. Introduction** =
10 10  
8 +== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
11 11  
12 -
13 -
14 -= 1.  Introduction =
15 -
16 -
17 -== 1.1 ​ What is CPN01 NB-IoT Pulse/Contact Sensor ==
18 -
19 -
20 -(((
21 21  The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
22 -)))
23 23  
24 -(((
25 25  The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
26 -)))
27 27  
28 -(((
29 29  CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
30 -)))
31 31  
32 -(((
33 33  CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
34 -)))
35 35  
36 -(((
37 37  NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
38 38  \\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
39 39  \\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
40 40  \\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
41 -)))
42 42  
43 43  ​
44 44  
25 +== **​1.2 Features** ==
45 45  
46 -== ​1.2  Features ==
47 -
48 -
49 49  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
50 50  * Open/Close detect
51 51  * Open/Close statistics
... ... @@ -61,17 +61,14 @@
61 61  * Micro SIM card slot for NB-IoT SIM
62 62  * 8500mAh Battery for long-term use
63 63  
42 +== **1.3  Specification** ==
64 64  
44 +**Common DC Characteristics:**
65 65  
66 -== 1.3  Specification ==
67 -
68 -
69 -(% style="color:blue" %)**Common DC Characteristics:**
70 -
71 71  * Supply Voltage: 2.1v ~~ 3.6v
72 72  * Operating Temperature: -40 ~~ 85°C
73 73  
74 -(% style="color:blue" %)**NB-IoT Spec:**
49 +**NB-IoT Spec:**
75 75  
76 76  * - B1 @H-FDD: 2100MHz
77 77  * - B3 @H-FDD: 1800MHz
... ... @@ -80,103 +80,76 @@
80 80  * - B20 @H-FDD: 800MHz
81 81  * - B28 @H-FDD: 700MHz
82 82  
58 +== **1.4 Installation** ==
83 83  
84 -
85 -== 1.4  Installation ==
86 -
87 -
88 88  Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
89 89  
90 90  [[image:image-20221021110329-1.png]]
91 91  
92 -
93 93  [[image:image-20221022234602-2.png||height="288" width="922"]]
94 94  
95 95  
67 +== **1.5 ​Applications** ==
96 96  
97 -== 1.5 ​ Applications ==
98 -
99 -
100 100  * Open/Close Detection
101 101  * Pulse meter application
102 102  * Dry Contact Detection
103 103  
73 +== **1.6 Mechanical** ==
104 104  
105 -
106 -== 1.6  Mechanical ==
107 -
108 -
109 109  ​[[image:image-20221021110415-3.png]]
110 110  
77 +== ** 1.7 Pin Definitions and Switch** ==
111 111  
112 -
113 -== 1.7  Pin Definitions and Switch ==
114 -
115 -
116 116  [[image:image-20221021110429-4.png]]
117 117  
81 +=== **1.7.1 Pin Definition** ===
118 118  
119 -=== 1.7.1  Pin Definition ===
120 -
121 -
122 122  CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
123 123  
124 124  
86 +=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
125 125  
126 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
127 -
128 -
129 129  Power on Device when putting this jumper.
130 130  
131 131  
91 +=== **1.7.3 BOOT MODE / SW1** ===
132 132  
133 -=== 1.7.3  BOOT MODE / SW1 ===
134 134  
94 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
135 135  
136 -1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
96 +2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
137 137  
138 -2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
139 139  
99 +=== **1.7.4 Reset Button** ===
140 140  
141 141  
142 -=== 1.7.4  Reset Button ===
143 -
144 -
145 145  Press to reboot the device.
146 146  
147 147  
105 +=== **1.7.5 LED** ===
148 148  
149 -=== 1.7.5  LED ===
150 150  
151 -
152 152  The LED will blink when :
153 153  
154 -1.  Boot the device in flash mode
110 +1. Boot the device in flash mode
111 +1. Send an uplink packet
155 155  
156 -2.  Send an uplink packet
113 += **2.  Use CPN01 to communicate with IoT Server** =
157 157  
115 +== **2.1  How it works** ==
158 158  
117 +The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
159 159  
160 -= 2.  Use CPN01 to communicate with IoT Server =
161 -
162 -
163 -== 2.1  How it works ==
164 -
165 -
166 -The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get (% style="color:blue" %)**Open/Close Event or Count**(%%) from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
167 -
168 168  The diagram below shows the working flow in the default firmware of CPN01:
169 169  
170 170  [[image:image-20221021110615-5.png]]
171 171  
172 172  
124 +== **2.2 ​ Configure CPN01** ==
173 173  
174 -== 2.2 ​ Configure CPN01 ==
126 +=== **2.2.1 Test Requirement** ===
175 175  
176 -
177 -=== 2.2.1 Test Requirement ===
178 -
179 -
180 180  To use CPN01 in your city, make sure to meet below requirements:
181 181  
182 182  * Your local operator has already distributed an NB-IoT Network.
... ... @@ -183,16 +183,14 @@
183 183  * The local NB-IoT network used the band that CPN01 supports.
184 184  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
185 185  
186 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
134 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
187 187  
188 188  [[image:image-20221023000439-3.png]]
189 189  
190 190   ​
191 191  
140 +=== **2.2.2 Insert NB-IoT SIM card** ===
192 192  
193 -=== 2.2.2 Insert NB-IoT SIM card ===
194 -
195 -
196 196  Insert the NB-IoT Card get from your provider.
197 197  
198 198  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -200,33 +200,26 @@
200 200  [[image:image-20221021110745-6.png]] ​
201 201  
202 202  
149 +=== **2.2.3 Connect USB – TTL to CPN01 and configure it** ===
203 203  
204 -=== 2.2.3 Connect USB – TTL to CPN01 and configure it ===
151 +User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
205 205  
153 +**Connection:**
206 206  
207 -User need to configure CPN01 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
155 + USB TTL GND <~-~-~-~-> GND
208 208  
209 -(% style="color:blue" %)**Connection:**
157 + USB TTL TXD <~-~-~-~-> UART_RXD
210 210  
211 -(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
159 + USB TTL RXD <~-~-~-~-> UART_TXD
212 212  
213 -(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
214 -
215 -(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
216 -
217 -
218 218  In the PC, use below serial tool settings:
219 219  
220 -* Baud:  (% style="color:red" %)**9600**
163 +* Baud:  **9600**
164 +* Data bits:** 8**
165 +* Stop bits: **1**
166 +* Parity:  **None**
167 +* Flow Control: **None**
221 221  
222 -* Data bits:** (% style="color:red" %)8(%%)**
223 -
224 -* Stop bits: (% style="color:red" %)**1**
225 -
226 -* Parity:  (% style="color:red" %)**None**
227 -
228 -* Flow Control: (% style="color:red" %)**None**
229 -
230 230  Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
231 231  
232 232  ​[[image:image-20221021110817-7.png]]
... ... @@ -234,93 +234,74 @@
234 234  CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
235 235  
236 236  
237 -(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 +**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
238 238  
239 239  
179 +=== **2.2.4 Use CoAP protocol to uplink data** ===
240 240  
241 -=== 2.2.4 Use CoAP protocol to uplink data ===
181 +**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
242 242  
243 243  
244 -(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
184 +**Use below commands in CPN01:**
245 245  
186 +* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
187 +* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ Set CoAP server address and port
188 +* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set CoAP resource path
246 246  
247 -(% style="color:blue" %)**Use below commands in CPN01:**
248 -
249 -* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
250 -
251 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
252 -
253 -* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
254 -
255 255  For parameter description, please refer to AT command set
256 256  
257 257  [[image:image-20221021110948-8.png]]
258 258  
259 259  
260 -After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
195 +After configuring the server address and **reset CPN01** (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
261 261  
262 262  [[image:image-20221021110956-9.png]] ​
263 263  
264 264  
200 +=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
265 265  
266 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
267 267  
203 +**AT Commands:**
268 268  
269 -(% style="color:blue" %)**AT Commands:**
205 +* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
206 +* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ Set UDP server address and port
207 +* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
270 270  
271 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
272 -
273 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
274 -
275 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
276 -
277 277  ​ [[image:image-20221021111025-10.png]]
278 278  
279 -
280 280  [[image:image-20221021111033-11.png||height="241" width="576"]]
281 281  
282 282  ​
283 283  
215 +=== **2.2.6 Use MQTT protocol to uplink data** ===
284 284  
285 -=== 2.2.6 Use MQTT protocol to uplink data ===
286 286  
218 +**AT Commands:**
287 287  
288 -(% style="color:blue" %)**AT Commands:**
220 +* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
221 +* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
222 +* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
223 +* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
224 +* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
225 +* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
226 +* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
289 289  
290 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
291 -
292 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
293 -
294 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
295 -
296 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
297 -
298 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
299 -
300 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
301 -
302 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
303 -
304 304  ​ [[image:image-20221021111058-12.png]]
305 305  
230 +[[image:image-20221021111108-13.png]]
306 306  
307 -[[image:image-20221021111201-16.png||height="472" width="653"]]
308 -
309 309  ​
310 310  
311 311  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
312 312  
313 313  
237 +=== **2.2.7 Use TCP protocol to uplink data** ===
314 314  
315 -=== 2.2.7 Use TCP protocol to uplink data ===
239 +**AT Commands**
316 316  
241 +* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
242 +* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ Set TCP server address and port
317 317  
318 -(% style="color:blue" %)**AT Commands:**
319 -
320 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
321 -
322 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
323 -
324 324  ​ [[image:image-20221021111125-14.png]]
325 325  
326 326  [[image:image-20221021111131-15.png]]
... ... @@ -327,83 +327,73 @@
327 327  
328 328  ​
329 329  
250 +=== **2.2.8 Change Update Interval** ===
330 330  
331 -=== 2.2.8 Change Update Interval ===
252 +User can use below command to change the **uplink interval**.
332 332  
254 +* **AT+TDC=7200      ** ~/~/ Set Update Interval to 7200s (2 hours)
333 333  
334 -User can use below command to change the (% style="color:blue" %)**uplink interval**.
256 +**NOTE:**
335 335  
336 -* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (2 hours)
258 +**~1. By default, the device will send an uplink message every 1 hour.**
337 337  
338 -(% style="color:red" %)**NOTE:**
339 339  
340 -1.  By default, the device will send an uplink message every 1 hour.
261 +== **2.3  Uplink Payload** ==
341 341  
342 -
343 -
344 -== 2.3  Uplink Payload ==
345 -
346 -
347 347  The uplink payload includes 123 bytes in total by default.
348 348  
349 349  Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
350 350  
267 +|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**1**|**1**|**3**
268 +|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[ Calculate Flag>>path:#H2.4.8A0DigitalInterrupt]]|Contact Status|Alarm|Total pulse
351 351  
352 -(% border="1.5" style="background-color:#ffffcc; color:green; width:510px" %)
353 -|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:40px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:40px" %)**1**|(% style="width:60px" %)**3**
354 -|=(% style="width: 96px;" %)**Value**|(% style="width:84px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:44px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:121px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:52px" %)MOD|(% style="width:84px" %)[[ Calculate Flag>>||anchor="H2.4.5A0CalculateFlag"]]|(% style="width:116px" %)[[Contact Status>>||anchor="H2.4.7A0ContactStatus"]]|(% style="width:57px" %)[[Alarm>>||anchor="H2.4.6A0Alarm"]]|(% style="width:91px" %)[[Total pulse>>||anchor="H2.4.8A0Totalpulse"]]
270 +(% style="width:1201px" %)
271 +|**3**|**4**|**1**|**3**|**1**|**3**|4|**8 group**|(% style="width:1px" %)
272 +|The last open duration|Time stamp|Contact Status|Total pulse|Calculate Flag|The last open duration|Time stamp|...|(% style="width:1px" %)
355 355  
356 -(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
357 -|(% style="width:100px" %)**3**|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:100px" %)**3**|(% style="width:80px" %)4|(% style="width:50px" %)**8 group**
358 -|(% style="width:176px" %)[[The last open duration>>||anchor="H2.4.9A0Thelastopenduration"]]|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Contact Status|(% style="width:92px" %)Total pulse|(% style="width:169px" %)The last open duration|(% style="width:97px" %)Time stamp|(% style="width:74px" %)...
359 -
360 360  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
361 361  
362 362  [[image:image-20221021111201-16.png||height="572" width="792"]]
363 363  
364 -
365 365  The payload is ASCII string, representative same HEX:
366 366  
367 -**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0c78__(% style="color:#00b0f0" %) __17__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__ (% style="color:#660066" %)__00__ (% style="color:#aaaa40" %)__000009__(% style="color:#663300" %) __000002__ (% style="color:#d60093" %)__6315537b__ (% style="color:#660066" %)__01 00000b 02 0000026 63510fed__ (%%)__0100000e0200000263510f39__ __010000000000000063510e85__ __010000000000000063510d2e__ __010000000000000063510c7a__ __010000000000000063510bc6__ __010000000000000063510954__ __010000000000000063510882 __**
280 +**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
368 368  
369 -**where:**
282 +where:
283 +*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
370 370  
371 -* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
285 +*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
372 372  
373 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
287 +*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
374 374  
375 -* (% style="color:#037691" %)**BAT :**(%%) 0x0c78 = 3192 mV = 3.192V
289 +*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
376 376  
377 -* (% style="color:#037691" %)**Singal: **(%%)0x17 = 23
291 +*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
378 378  
379 -* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
293 +*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00=0
380 380  
381 -* (% style="color:#037691" %)**Calculate Flag:**(%%) 0x00=0
295 +*(% style="color:#037691" %) **Contact Status:**(%%) 0x00=0
382 382  
383 -* (% style="color:#037691" %)**Contact Status:**(%%) 0x00=0
297 +*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
384 384  
385 -* (% style="color:#037691" %)**Alarm: **(%%)0x00 =0
299 +*(% style="color:#037691" %) **Total pulse:0x09 =0**
386 386  
387 -* (% style="color:#037691" %)**Total pulse: **(%%)0x000009 =9
301 +*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
388 388  
389 -* (% style="color:#037691" %)**The last open duration: **(%%)0x000002 =2
303 +*(% style="color:#037691" %)** Time stamp :**(%%) 0x6315537b =1662342011 (Unix Time)
390 390  
391 -* (% style="color:#037691" %)**Timestamp:**(%%) 0x6315537b =1662342011 (Unix Time)
305 +*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 01  00000b  02  000026  63510fed
392 392  
393 -* (% style="color:#037691" %)**Contact Status, Total pulse,The last open duration ,Time stamp :**(%%) 01  00000b  000026  63510fed
307 +*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
394 394  
395 -* (% style="color:#037691" %)**8 sets of recorded data: Contact Status, Total pulse, The last open duration ,Time stamp :**(%%) 0100000e00002663510f39,.......
396 396  
310 +== **2.4  Payload Explanation and Sensor Interface** ==
397 397  
398 -== 2.4  Payload Explanation and Sensor Interface ==
312 +=== **2.4.1  Device ID** ===
399 399  
400 -
401 -=== 2.4.1  Device ID ===
402 -
403 -
404 404  By default, the Device ID is equal to the last 15 bits of IMEI.
405 405  
406 -User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
316 +User can use **AT+DEUI** to set Device ID
407 407  
408 408  **Example:**
409 409  
... ... @@ -412,19 +412,15 @@
412 412  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
413 413  
414 414  
325 +=== **2.4.2  Version Info** ===
415 415  
416 -=== 2.4.2  Version Info ===
417 -
418 -
419 419  Specify the software version: 0x64=100, which means firmware version 1.00.
420 420  
421 421  For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
422 422  
423 423  
332 +=== **2.4.3  Battery Info** ===
424 424  
425 -=== 2.4.3  Battery Info ===
426 -
427 -
428 428  Check the battery voltage for CPN01.
429 429  
430 430  Ex1: 0x0B45 = 2885mV
... ... @@ -432,10 +432,8 @@
432 432  Ex2: 0x0B49 = 2889mV
433 433  
434 434  
341 +=== **2.4.4  Signal Strength** ===
435 435  
436 -=== 2.4.4  Signal Strength ===
437 -
438 -
439 439  NB-IoT Network signal Strength.
440 440  
441 441  **Ex1: 0x1d = 29**
... ... @@ -451,10 +451,8 @@
451 451  **99**    Not known or not detectable
452 452  
453 453  
358 +=== **2.4.5 Calculate Flag** ===
454 454  
455 -=== 2.4.5  Calculate Flag ===
456 -
457 -
458 458  The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
459 459  
460 460  User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
... ... @@ -464,35 +464,27 @@
464 464  Range (6 bits): (b)000000 ~~ (b) 111111
465 465  
466 466  
369 +=== **2.4.6  Alarm** ===
467 467  
468 -=== 2.4.6  Alarm ===
371 +See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
469 469  
470 470  
471 -See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
374 +=== **2.4.7 Contact Status** ===
472 472  
473 -
474 -
475 -=== 2.4.7  Contact Status ===
476 -
477 -
478 478  0: Open
479 479  
480 480  1: Close
481 481  
482 482  
381 +=== **2.4.8 Total pulse** ===
483 483  
484 -=== 2.4.8  Total pulse ===
383 +Total pulse/counting based on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
485 485  
486 -
487 -Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
488 -
489 489  Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
490 490  
491 491  
388 +=== **2.4.9 The last open duration** ===
492 492  
493 -=== 2.4.9  The last open duration ===
494 -
495 -
496 496  Dry Contact last open duration.
497 497  
498 498  Unit: min.
... ... @@ -500,10 +500,8 @@
500 500  [[image:image-20221021111346-17.png||height="146" width="770"]]
501 501  
502 502  
397 +=== **2.4.10  Timestamp** ===
503 503  
504 -=== 2.4.10  Timestamp ===
505 -
506 -
507 507  Timestamp : 0x6315537b =1662342011
508 508  
509 509  Convert Unix timestamp to time 2022-9-5 9:40:11.
... ... @@ -510,18 +510,15 @@
510 510  
511 511  **~ **
512 512  
405 +== **2.5  Downlink Payload** ==
513 513  
514 -== 2.5  Downlink Payload ==
515 -
516 -
517 517  By default, CPN01 prints the downlink payload to console port.
518 518  
519 519  [[image:image-20221021111414-18.png]] ​
520 520  
521 -
522 522  **Examples:**
523 523  
524 -* (% style="color:#037691" %)**Set TDC**
413 +* **Set TDC**
525 525  
526 526  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
527 527  
... ... @@ -529,19 +529,16 @@
529 529  
530 530  Payload:    01 00 00 3C    TDC=60S
531 531  
532 -* (% style="color:#037691" %)**Reset**
421 +* **Reset**
533 533  
534 534  If payload = 0x04FF, it will reset the NSE01
535 535  
536 -* (% style="color:#037691" %)**INTMOD**
425 +* **INTMOD**
537 537  
538 538  Downlink Payload: 06000003, Set AT+INTMOD=3
539 539  
429 +== **2.6  ​LED Indicator** ==
540 540  
541 -
542 -== 2.6  ​LED Indicator ==
543 -
544 -
545 545  The CPN01 has an internal LED which is to show the status of different states.
546 546  
547 547  * When the device starts normally, the LED will light up for 1 second.
... ... @@ -548,14 +548,12 @@
548 548  * After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
549 549  * For each uplink probe, LED will be on for 500ms.
550 550  
437 +== **2.7  Alarm Base on Timeout** ==
551 551  
552 -== 2.7  Alarm Base on Timeout ==
553 -
554 -
555 555  CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
556 556  
557 557  
558 -(% style="color:blue" %)**1. Keep Status: Status to be monitor**
442 +**~1. Keep Status: Status to be monitor**
559 559  
560 560  Keep Status = 1: Monitor Close to Open event
561 561  
... ... @@ -562,7 +562,7 @@
562 562  Keep Status = 0: Monitor Open to Close event
563 563  
564 564  
565 -(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
449 +**2. Keep Time: Timeout to send an Alarm**
566 566  
567 567  Range 0 ~~ 65535(0xFFFF) seconds.
568 568  
... ... @@ -571,108 +571,84 @@
571 571  If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
572 572  
573 573  
574 -(% style="color:blue" %)**AT Command to configure:**
458 +**AT Command** to configure:
575 575  
576 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
460 +**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
577 577  
578 -(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
462 +**AT+TTRIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
579 579  
580 580  
465 +== **2.8 Set debug mode** ==
581 581  
582 -== 2.8  Set debug mode ==
583 -
584 -
585 585  Feature: Enable or Disable debug mode
586 586  
587 -(% style="color:blue" %)**AT Command: AT+DEBUG**
588 588  
470 +**AT Command: AT+DEBUG**
471 +
589 589  [[image:image-20221021111629-21.png]]
590 590  
474 +== **2.9 Clear Flash Record** ==
591 591  
592 -
593 -== 2.9  Clear Flash Record ==
594 -
595 -
596 596  Feature: Clear flash storage for data log feature.
597 597  
598 -(% style="color:blue" %)**AT Command: AT+CLRDTA**
478 +**AT Command: AT+CLRDTA**
599 599  
600 600  [[image:image-20221021111527-19.png]]
601 601  
482 +== ** 2.10 Set trigger mode** ==
602 602  
484 +➢ AT Command: **AT+TTRMOD**
603 603  
604 -== 2.10  Set trigger mode ==
605 -
606 -
607 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
608 -
609 609  Feature: Set the trigger interrupt mode.
610 610  
611 611  [[image:image-20221021111552-20.png]]
612 612  
490 +== **2.11 Set the calculate flag** ==
613 613  
614 -
615 -== 2.11  Set the calculate flag ==
616 -
617 -
618 618  Feature: Set the calculate flag
619 619  
620 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
494 +**AT Command: AT+CALCFLAG**
621 621  
622 622  [[image:image-20221021111711-22.png]]
623 623  
498 +== **2.12 Set count number** ==
624 624  
625 -
626 -== 2.12 Set count number ==
627 -
628 -
629 629  Feature: Manually set the count number
630 630  
631 -(% style="color:blue" %)**AT Command: AT+SETCNT**
502 +**AT Command: AT+SETCNT**
632 632  
633 633  [[image:image-20221021111748-24.png]]
634 634  
506 +== **2.13 Set the number of data to be uploaded and the recording time** ==
635 635  
508 +➢ AT Command:
636 636  
637 -== 2.13  Set the number of data to be uploaded and the recording time ==
510 +AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
638 638  
639 639  
640 -(% style="color:blue" %)**AT Command:**
513 +AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
641 641  
642 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
515 +== **2.14 Read or Clear cached data** ==
643 643  
644 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
517 +➢ AT Command:
645 645  
519 +AT+CDP    ~/~/ Read cached data
646 646  
647 -
648 -== 2.14  Read or Clear cached data ==
649 -
650 -
651 -(% style="color:blue" %)**AT Command:**
652 -
653 -(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
654 -
655 -(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
656 -
657 657  [[image:image-20221021111810-25.png||height="364" width="797"]]
658 658  
659 659  
524 +AT+CDP=0    ~/~/ Clear cached data ​
660 660  
661 -== 2.15  ​Firmware Change Log ==
526 +== **2.15  ​Firmware Change Log** ==
662 662  
528 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
663 663  
664 -Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
530 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
665 665  
666 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
532 +== **2.16  ​Battery Analysis** ==
667 667  
534 +=== **2.16.1  ​Battery Type** ===
668 668  
669 -
670 -== 2.16  ​Battery Analysis ==
671 -
672 -
673 -=== 2.16.1  ​Battery Type ===
674 -
675 -
676 676  The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
677 677  
678 678  The battery is designed to last for several years depends on the actual use environment and update interval. 
... ... @@ -680,55 +680,40 @@
680 680  The battery-related documents as below:
681 681  
682 682  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
683 -
684 684  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
685 -
686 686  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
687 687  
688 688  [[image:image-20221021111911-26.png]] ​
689 689  
548 +=== **2.16.2  Power consumption Analyze** ===
690 690  
691 -
692 -=== 2.16.2  Power consumption Analyze ===
693 -
694 -
695 695  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
696 696  
697 697  Instruction to use as below:
698 698  
699 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
554 +**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
700 700  
701 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
556 +**Step 2: ** Open it and choose
702 702  
703 703  * Product Model
704 -
705 705  * Uplink Interval
706 -
707 707  * Working Mode
708 708  
709 709  And the Life expectation in difference case will be shown on the right.
710 710  
711 -[[image:1666596205057-567.png]] ​
564 +[[image:image-20221021111923-27.png||height="253" width="783"]] ​
712 712  
566 +=== **2.16.3  ​Battery Note** ===
713 713  
714 -
715 -=== 2.16.3  ​Battery Note ===
716 -
717 -
718 718  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
719 719  
570 +=== **2.16.4  Replace the battery** ===
720 720  
721 -
722 -=== 2.16.4  Replace the battery ===
723 -
724 -
725 725  The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
726 726  
727 727  
575 += **3. ​ Access NB-IoT Module** =
728 728  
729 -= 3. ​ Access NB-IoT Module =
730 -
731 -
732 732  Users can directly access the AT command set of the NB-IoT module.
733 733  
734 734  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
... ... @@ -735,14 +735,10 @@
735 735  
736 736  [[image:image-20221021112006-28.png]] ​
737 737  
583 += **4.  Using the AT Commands** =
738 738  
585 +== **4.1  Access AT Commands** ==
739 739  
740 -= 4.  Using the AT Commands =
741 -
742 -
743 -== 4.1  Access AT Commands ==
744 -
745 -
746 746  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
747 747  
748 748  AT+<CMD>?  : Help on <CMD>
... ... @@ -753,9 +753,8 @@
753 753  
754 754  AT+<CMD>=?  : Get the value
755 755  
597 +**General Commands**      
756 756  
757 -(% style="color:blue" %)**General Commands**      
758 -
759 759  AT  : Attention       
760 760  
761 761  AT?  : Short Help     
... ... @@ -778,12 +778,15 @@
778 778  
779 779  AT+SERVADDR  : Server Address
780 780  
781 -AT+TR      :  Get or Set record time
621 +AT+TR      : Get or Set record time"
782 782  
623 +
783 783  AT+NOUD      : Get or Set the number of data to be uploaded
784 784  
785 -AT+CDP     :  Read or Clear cached data
786 786  
627 +AT+CDP     : Read or Clear cached data
628 +
629 +
787 787  AT+ DEBUG   : Enable or Disable debug mode
788 788  
789 789  AT+ TTRIG   : Get or Set Alarm Base on Timeout
... ... @@ -794,19 +794,16 @@
794 794  
795 795  AT+ CLRC   : Clear current door open count
796 796  
640 +**COAP Management**      
797 797  
798 -(% style="color:blue" %)**COAP Management**      
799 -
800 800  AT+URI            : Resource parameters
801 801  
644 +**UDP Management**
802 802  
803 -(% style="color:blue" %)**UDP Management**
804 -
805 805  AT+CFM          : Upload confirmation mode (only valid for UDP)
806 806  
648 +**MQTT Management**
807 807  
808 -(% style="color:blue" %)**MQTT Management**
809 -
810 810  AT+CLIENT               : Get or Set MQTT client
811 811  
812 812  AT+UNAME  : Get or Set MQTT Username
... ... @@ -817,73 +817,86 @@
817 817  
818 818  AT+SUBTOPIC  : Get or Set MQTT subscription topic
819 819  
660 +**Information**          
820 820  
821 -(% style="color:blue" %)**Information**          
822 -
823 823  AT+FDR  : Factory Data Reset
824 824  
825 825  AT+PWORD  : Serial Access Password
826 826  
666 += **​5.  FAQ** =
827 827  
668 +== **5.1 ​ How to Upgrade Firmware** ==
828 828  
829 -= ​5.  FAQ =
670 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
830 830  
672 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
831 831  
832 -== 5.1 ​ How to Upgrade Firmware ==
674 +**Notice, **CPN01 **and **CPL01 **share the same mother board. They use the same connection and method to update.**
833 833  
834 834  
835 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
677 += **6.  Trouble Shooting** =
836 836  
837 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
679 +== **6.1  ​Connection problem when uploading firmware** ==
838 838  
839 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
681 +**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
840 840  
841 841  
684 +== **6.2  AT Command input doesn't work** ==
842 842  
843 -= 6.  Trouble Shooting =
686 +In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
844 844  
845 845  
846 -== 6.1  ​Connection problem when uploading firmware ==
689 += **7. ​ Order Info** =
847 847  
691 +Part Number**:** CPN01
848 848  
849 -(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
850 850  
694 += **8.  Packing Info** =
851 851  
696 +**Package Includes**:
852 852  
853 -== 6.2  AT Command input doesn't work ==
698 +* CPN01 Open/Close Sensor x 1
699 +* External antenna x 1
854 854  
701 +**Dimension and weight**:
855 855  
856 -In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
703 +* Size: 195 x 125 x 55 mm
704 +* Weight:   420g
857 857  
706 += **9.  Support** =
858 858  
708 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
709 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
859 859  
860 -= 7. ​ Order Info =
711 +​
861 861  
862 862  
863 -Part Number**:** CPN01
864 864  
865 865  
866 866  
867 -= 8.  Packing Info =
868 868  
869 869  
870 -(% style="color:blue" %)**Package Includes**:
871 871  
872 -* CPN01 Open/Close Sensor x 1
873 -* External antenna x 1
874 874  
875 -(% style="color:blue" %)**Dimension and weight**:
876 876  
877 -* Size: 195 x 125 x 55 mm
878 -* Weight:   420g
879 879  
880 880  
881 881  
882 -= 9.  Support =
883 883  
884 884  
885 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
886 886  
887 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
888 888  
889 -​
729 +
730 +
731 +
732 +
733 +
734 +
735 +
736 +
737 +
738 +
739 +
740 +
741 +
742 +
1666596205057-567.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -179.8 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0