Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 48.2 >
edited by Xiaoling
on 2022/10/24 15:43
To version < 79.1 >
edited by Xiaoling
on 2022/12/07 17:40
>
Change comment: Uploaded new attachment "1670406036256-101.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
1 +NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
Content
... ... @@ -1,46 +1,46 @@
1 1  (% style="text-align:center" %)
2 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
2 +[[image:LMDS200_10.jpg]]
3 3  
4 4  
5 -
6 6  **Table of Contents：**
7 7  
8 -{{toc/}}
9 9  
10 10  
11 11  
12 12  
13 -
14 14  = 1.  Introduction =
15 15  
13 +== 1.1 ​ What is NMDS200 NB-IoT Microwave Radar Distance Sensor ==
16 16  
17 -== 1.1 ​ What is CPN01 NB-IoT Pulse/Contact Sensor ==
18 18  
16 +(((
17 +The Dragino NMDS200 is a(% style="color:blue" %)** NB-IoT Microwave Radar distance sensor**(%%). It uses (% style="color:blue" %)**24Ghz Microwave**(%%) to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is (% style="color:blue" %)**more reliable for condensation / dusty environment**(%%). It can sense correct distance even there is water or thick dust on top of the sensor.
19 19  
20 -The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
21 21  
22 -The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
20 +The NMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
23 23  
24 -CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
22 +NMDS200 can (% style="color:blue" %)**measure two distances**(%%): the closest object and next object behind the closest one.
25 25  
26 -CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
24 +NMDS200 (% style="color:blue" %)**supports Alarm Feature**(%%), user can set the NMDS200 to uplink data in a short interval when the distance is out of configured range.
27 27  
28 -NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
29 -\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
30 -\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
31 -\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
26 +NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
32 32  
33 -​
28 +NMDS200 (% style="color:blue" %)**supports different uplink**(%%) methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
34 34  
30 +NMDS200 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**,(%%) It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
35 35  
32 +To use NMDS200, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NMDS200 supports. If local operator support it, user needs to get a** (% style="color:blue" %)NB-IoT SIM card(%%)** from the operator and install into NMDS200 to get NB-IoT network connection.
33 +)))
34 +
35 +
36 +
36 36  == ​1.2  Features ==
37 37  
38 38  
39 39  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
40 -* Open/Close detect
41 -* Open/Close statistics
41 +* Short uplink interval for Distance Alarm
42 42  * Monitor Battery Level
43 -* Uplink on periodically and open/close event
43 +* Microwave Radar for distance detection
44 44  * Datalog feature
45 45  * Uplink periodically
46 46  * Downlink to change configure
... ... @@ -51,130 +51,112 @@
51 51  * Micro SIM card slot for NB-IoT SIM
52 52  * 8500mAh Battery for long-term use
53 53  
54 -== 1.3  Specification ==
55 55  
56 56  
57 -(% style="color:blue" %)**Common DC Characteristics:**
56 +== 1.3 Radar probe specification ==
58 58  
59 -* Supply Voltage: 2.1v ~~ 3.6v
60 -* Operating Temperature: -40 ~~ 85°C
61 61  
62 -(% style="color:blue" %)**NB-IoT Spec:**
59 +* Measuring Method: FMCW
60 +* Frequency: 24.000 24.500 GHz
61 +* Measurement output power: 6dBm
62 +* Measure range: 0.5 20m
63 +* Accuracy: ±0.1m
64 +* Resolution: 0.01m
65 +* Horizontal Angel: 78°
66 +* Vertical Angel: 23°
63 63  
64 -* - B1 @H-FDD: 2100MHz
65 -* - B3 @H-FDD: 1800MHz
66 -* - B8 @H-FDD: 900MHz
67 -* - B5 @H-FDD: 850MHz
68 -* - B20 @H-FDD: 800MHz
69 -* - B28 @H-FDD: 700MHz
70 70  
71 -== 1.4  Installation ==
72 72  
73 73  
74 -Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
71 +== 1.4  Storage Temperature ==
75 75  
76 -[[image:image-20221021110329-1.png]]
77 77  
78 -[[image:image-20221022234602-2.png||height="288" width="922"]]
74 + -40°C to +85°C
79 79  
80 80  
81 81  
82 -== 1.5 ​ Applications ==
83 83  
84 84  
85 -* Open/Close Detection
86 -* Pulse meter application
87 -* Dry Contact Detection
80 +== 1.5 ​ Applications ==
88 88  
89 -== 1.6  Mechanical ==
90 90  
91 91  
92 -​[[image:image-20221021110415-3.png]]
84 +* Horizontal distance measurement
85 +* Liquid level measurement
86 +* Parking management system
87 +* Object proximity and presence detection
88 +* Intelligent trash can management system
89 +* Robot obstacle avoidance
90 +* Automatic control
91 +* Sewer
92 +* Bottom water level monitoring
93 93  
94 94  
95 95  
96 -== 1.7  Pin Definitions and Switch ==
96 +== 1.6  Specification ==
97 97  
98 -[[image:image-20221021110429-4.png]]
99 99  
99 +(% style="color:blue" %)**Common DC Characteristics:**
100 100  
101 -=== 1.7.1  Pin Definition ===
101 +* Supply Voltage: 2.1v ~~ 3.6v
102 +* Operating Temperature: 0 ~~ 70°C
102 102  
104 +(% style="color:blue" %)**NB-IoT Spec:**
103 103  
104 -CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
106 +* B1 @H-FDD: 2100MHz
107 +* B3 @H-FDD: 1800MHz
108 +* B8 @H-FDD: 900MHz
109 +* B5 @H-FDD: 850MHz
110 +* B20 @H-FDD: 800MHz
111 +* B28 @H-FDD: 700MHz
105 105  
106 106  
107 107  
108 -=== 1.7.2  Jumper JP2(Power ON/OFF) ===
115 +== 1.7  Installation ==
109 109  
110 110  
111 -Power on Device when putting this jumper.
118 +Sensor measure direction and angle is as below. When install the sensor, please make sure the sensor direct to object.
112 112  
113 113  
121 +[[image:image-20221207170748-1.png]] [[image:image-20221207170748-2.png||height="366" width="672"]]
114 114  
115 -=== 1.7.3  BOOT MODE / SW1 ===
116 116  
117 117  
118 -1) ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
125 +== 1.8  Pin Definitions and Switch ==
119 119  
120 -2) Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
121 121  
128 +[[image:1670404362039-351.png]]
122 122  
123 123  
124 -=== 1.7.4  Reset Button ===
131 += 2.  Use NMDS200 to communicate with IoT Server =
125 125  
126 -
127 -Press to reboot the device.
128 -
129 -
130 -
131 -=== 1.7.5  LED ===
132 -
133 -
134 -The LED will blink when :
135 -
136 -1.  Boot the device in flash mode
137 -
138 -2.  Send an uplink packet
139 -
140 -
141 -
142 -= 2.  Use CPN01 to communicate with IoT Server =
143 -
144 -
145 145  == 2.1  How it works ==
146 146  
147 147  
148 -The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get (% style="color:blue" %)**Open/Close Event or Count**(%%) from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
136 +The NB-IoT network will forward this value to IoT server via the protocol defined by NMDS200.
149 149  
150 -The diagram below shows the working flow in the default firmware of CPN01:
138 +The diagram below shows the working flow in the default firmware of NMDS200:
151 151  
152 152  [[image:image-20221021110615-5.png]]
153 153  
154 154  
143 +== 2.2 ​ Configure NMDS200 ==
155 155  
156 -== 2.2 ​ Configure CPN01 ==
157 157  
146 +To use NMDS200 in your city, make sure to meet below requirements:
158 158  
159 -=== 2.2.1 Test Requirement ===
160 -
161 -
162 -To use CPN01 in your city, make sure to meet below requirements:
163 -
164 164  * Your local operator has already distributed an NB-IoT Network.
165 -* The local NB-IoT network used the band that CPN01 supports.
149 +* The local NB-IoT network used the band that NMDS200 supports.
166 166  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
167 167  
168 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
152 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NMDS200 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
169 169  
170 -[[image:image-20221023000439-3.png]]
154 +[[image:image-20221207173300-4.png]]
171 171  
172 - ​
173 173  
157 +=== 2.2.1 Insert NB-IoT SIM card ===
174 174  
175 -=== 2.2.2 Insert NB-IoT SIM card ===
176 176  
177 -
178 178  Insert the NB-IoT Card get from your provider.
179 179  
180 180  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -182,12 +182,11 @@
182 182  [[image:image-20221021110745-6.png]] ​
183 183  
184 184  
167 +=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
185 185  
186 -=== 2.2.3 Connect USB – TTL to CPN01 and configure it ===
187 187  
170 +User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
188 188  
189 -User need to configure CPN01 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
190 -
191 191  (% style="color:blue" %)**Connection:**
192 192  
193 193  (% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
... ... @@ -209,11 +209,11 @@
209 209  
210 210  * Flow Control: (% style="color:red" %)**None**
211 211  
212 -Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
193 +Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
213 213  
214 214  ​[[image:image-20221021110817-7.png]]
215 215  
216 -CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
197 +NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
217 217  
218 218  
219 219  (% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
... ... @@ -226,67 +226,66 @@
226 226  (% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
227 227  
228 228  
229 -(% style="color:blue" %)**Use below commands in CPN01:**
210 +(% style="color:blue" %)**Use below commands in NDS03A:**
230 230  
231 -(% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
212 +* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
232 232  
233 -(% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
214 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
234 234  
235 -(% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
216 +* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
236 236  
237 -
238 238  For parameter description, please refer to AT command set
239 239  
240 240  [[image:image-20221021110948-8.png]]
241 241  
242 242  
243 -After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), CPN01 will start to uplink sensor values to the CoAP server.
223 +After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
244 244  
245 -[[image:image-20221021110956-9.png]] ​
225 +[[image:image-20221118103547-9.png||height="605" width="837"]] ​
246 246  
247 247  
248 -
249 249  === 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
250 250  
251 251  
252 252  (% style="color:blue" %)**AT Commands:**
253 253  
254 -* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/ Set to use UDP protocol to uplink
233 +* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
255 255  
256 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/ Set UDP server address and port
235 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
257 257  
258 -* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/If the server does not respond, this command is unnecessary
237 +* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
259 259  
260 260  ​ [[image:image-20221021111025-10.png]]
261 261  
241 +
262 262  [[image:image-20221021111033-11.png||height="241" width="576"]]
263 263  
264 264  ​
265 265  
266 -
267 267  === 2.2.6 Use MQTT protocol to uplink data ===
268 268  
269 269  
270 270  (% style="color:blue" %)**AT Commands:**
271 271  
272 -* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
251 +* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
273 273  
274 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
253 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
275 275  
276 -* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/Set up the CLIENT of MQTT
255 +* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
277 277  
278 -* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/Set the username of MQTT
257 +* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
279 279  
280 -* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/Set the password of MQTT
259 +* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
281 281  
282 -* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/Set the sending topic of MQTT
261 +* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
283 283  
284 -* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/Set the subscription topic of MQTT
263 +* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
285 285  
286 -​ [[image:image-20221021111058-12.png]]
265 +​ [[image:image-20221118103445-7.png]]
287 287  
288 -[[image:image-20221021111201-16.png||height="472" width="653"]]
289 289  
268 +[[image:image-20221118103453-8.png||height="608" width="841"]]
269 +
290 290  ​
291 291  
292 292  MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
... ... @@ -295,11 +295,11 @@
295 295  === 2.2.7 Use TCP protocol to uplink data ===
296 296  
297 297  
298 -(% style="color:blue" %)**AT Commands**
278 +(% style="color:blue" %)**AT Commands:**
299 299  
300 -* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/ Set to use TCP protocol to uplink
280 +* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
301 301  
302 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/ Set TCP server address and port
282 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
303 303  
304 304  ​ [[image:image-20221021111125-14.png]]
305 305  
... ... @@ -312,69 +312,82 @@
312 312  
313 313  User can use below command to change the (% style="color:blue" %)**uplink interval**.
314 314  
315 -* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (2 hours)
295 +* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
316 316  
317 317  (% style="color:red" %)**NOTE:**
318 318  
319 -*
320 -**
321 -**1. By default, the device will send an uplink message every 1 hour.
299 +1.  By default, the device will send an uplink message every 4 hour.
322 322  
301 +
323 323  == 2.3  Uplink Payload ==
324 324  
325 325  
326 -The uplink payload includes 123 bytes in total by default.
305 +The uplink payload includes 26 bytes in total by default.
327 327  
328 -Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
307 +Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
329 329  
330 -|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**1**|**1**|**3**
331 -|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[ Calculate Flag>>path:#H2.4.8A0DigitalInterrupt]]|Contact Status|Alarm|Total pulse
309 +(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
332 332  
333 -(% style="width:1201px" %)
334 -|**3**|**4**|**1**|**3**|**1**|**3**|4|**8 group**|(% style="width:1px" %)
335 -|The last open duration|Time stamp|Contact Status|Total pulse|Calculate Flag|The last open duration|Time stamp|...|(% style="width:1px" %)
311 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
312 +|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:50px" %)**1**|(% style="width:60px" %)**1**|(% style="width:90px" %)**3**|(% style="width:100px" %)**3**
313 +|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
336 336  
337 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
315 +(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
316 +|(% style="width:50px" %)**4**|(% style="width:90px" %)**1**|(% style="width:90px" %)**3**|(% style="width:90px" %)**3**|(% style="width:60px" %)4|(% style="width:50px" %)(((
317 +**1-32 group**
318 +)))
319 +|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
338 338  
339 -[[image:image-20221021111201-16.png||height="572" width="792"]]
321 +(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
340 340  
341 -The payload is ASCII string, representative same HEX:
342 342  
343 -**0x (% style="color:red" %)f867787050213317  (% style="color:blue" %)0064 (% style="color:green" %) 0c78(% style="color:#00b0f0" %) 17(% style="color:#7030a0" %) 01(% style="color:#0020b0" %) 00 (% style="color:#420042" %)00 (% style="color:#660066" %)00 (% style="color:#aaaa40" %)09(% style="color:#663300" %) 02 (% style="color:#d60093" %)6315537b (% style="color:#660066" %)__01 00000b 02 0000026 63510fed__ (%%)__0100000e0200000263510f39__ __010000000000000063510e85__ __010000000000000063510d2e__ __010000000000000063510c7a__ __010000000000000063510bc6__ __010000000000000063510954__ __010000000000000063510882 __**
324 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
325 +|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:45px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:60px" %)**1**|(% style="width:60px" %)**1**|(% style="width:87px" %)**3**|(% style="width:80px" %)**3**
326 +|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
344 344  
345 -**where:**
328 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
329 +|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:75px" %)**1**|(% style="width:75px" %)**3**
330 +|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
346 346  
347 -(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
332 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
333 +|(% style="width:100px" %)**3**|(% style="width:80px" %)**1**|(% style="width:90px" %)**3**|(% style="width:90px" %)**3**|(% style="width:70px" %)**4**|(% style="width:80px" %)(((
334 +**1-32 group**
335 +)))
336 +|(% style="width:102px" %)last open time(pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:100px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
348 348  
349 -(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
338 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
350 350  
351 -(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
340 +[[image:image-20221117145932-2.png]]
352 352  
353 -(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
354 354  
355 -(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
343 +The payload is ASCII string, representative same HEX:
356 356  
357 -(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00=0
345 +**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
358 358  
359 -(% style="color:#037691" %) **Contact Status:**(%%) 0x00=0
347 +**where:**
360 360  
361 -(% style="color:#037691" %) **Alarm: **(%%)0x00 =0
349 +* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
362 362  
363 -(% style="color:#037691" %) **Total pulse: **(%%)0x09 =0
351 +* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
364 364  
365 -(% style="color:#037691" %) **The last open duration: **(%%)0x02 =2
353 +* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
366 366  
367 -(% style="color:#037691" %)** Time stamp :**(%%) 0x6315537b =1662342011 (Unix Time)
355 +* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
368 368  
369 -(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 01  00000b  02  000026  63510fed
357 +* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
370 370  
371 -(% style="color:#037691" %)**8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
359 +* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
372 372  
361 +* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
373 373  
363 +* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
374 374  
375 -== 2.4  Payload Explanation and Sensor Interface ==
365 +* (% style="color:#037691" %)**last open time:   **(%%)0x000017 =23
376 376  
367 +* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
377 377  
369 +== 2.4  Payload Explanation and Sensor Interface ==
370 +
378 378  === 2.4.1  Device ID ===
379 379  
380 380  
... ... @@ -389,20 +389,18 @@
389 389  The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
390 390  
391 391  
392 -
393 393  === 2.4.2  Version Info ===
394 394  
395 395  
396 396  Specify the software version: 0x64=100, which means firmware version 1.00.
397 397  
398 -For example 0x00 64 : This device is CPN01 with firmware version 1.0.0.
390 +For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
399 399  
400 400  
401 -
402 402  === 2.4.3  Battery Info ===
403 403  
404 404  
405 -Check the battery voltage for CPN01.
396 +Check the battery voltage for NDS03A.
406 406  
407 407  Ex1: 0x0B45 = 2885mV
408 408  
... ... @@ -409,7 +409,6 @@
409 409  Ex2: 0x0B49 = 2889mV
410 410  
411 411  
412 -
413 413  === 2.4.4  Signal Strength ===
414 414  
415 415  
... ... @@ -428,70 +428,38 @@
428 428  **99**    Not known or not detectable
429 429  
430 430  
421 +=== 2.4.5  Disalarm: (default: 0) ===
431 431  
432 -=== 2.4.5  Calculate Flag ===
433 433  
424 +(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
434 434  
435 -The calculate flag is a user defined field, IoT server can use this filed to handle different meters with different pulse factors. For example, if there are 100 water meters, meter 1~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
426 +(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
436 436  
437 -User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
428 + (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
438 438  
439 -Default value: 0. 
440 440  
441 -Range (6 bits): (b)000000 ~~ (b) 111111
431 +=== 2.4.6  Keep Status & Keep Time ===
442 442  
443 443  
434 +Shows the configure value of Alarm Base on Timeout Feature
444 444  
445 -=== 2.4.6  Alarm ===
446 446  
437 +=== 2.4.7  Timestamp ===
447 447  
448 -See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
449 449  
440 +Timestamp : 0x6315537b =1662342011
450 450  
451 451  
452 -=== 2.4.7  Contact Status ===
443 +=== 2.4.8  Switch Dual Channel Mode ===
453 453  
454 454  
455 -0: Open
446 +NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
456 456  
457 -1: Close
458 458  
459 -
460 -
461 -=== 2.4.8  Total pulse ===
462 -
463 -
464 -Total pulse/counting based on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
465 -
466 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
467 -
468 -
469 -
470 -=== 2.4.9  The last open duration ===
471 -
472 -
473 -Dry Contact last open duration.
474 -
475 -Unit: min.
476 -
477 -[[image:image-20221021111346-17.png||height="146" width="770"]]
478 -
479 -
480 -
481 -=== 2.4.10  Timestamp ===
482 -
483 -
484 -Timestamp : 0x6315537b =1662342011
485 -
486 -Convert Unix timestamp to time 2022-9-5 9:40:11.
487 -
488 -**~ **
489 -
490 -
491 491  == 2.5  Downlink Payload ==
492 492  
493 493  
494 -By default, CPN01 prints the downlink payload to console port.
452 +By default, NDS03A prints the downlink payload to console port.
495 495  
496 496  [[image:image-20221021111414-18.png]] ​
497 497  
... ... @@ -508,7 +508,7 @@
508 508  
509 509  * (% style="color:#037691" %)**Reset**
510 510  
511 -If payload = 0x04FF, it will reset the NSE01
469 +If payload = 0x04FF, it will reset the NDS03A
512 512  
513 513  * (% style="color:#037691" %)**INTMOD**
514 514  
... ... @@ -515,20 +515,19 @@
515 515  Downlink Payload: 06000003, Set AT+INTMOD=3
516 516  
517 517  
518 -
519 519  == 2.6  ​LED Indicator ==
520 520  
521 521  
522 -The CPN01 has an internal LED which is to show the status of different states.
479 +The NDS03A has an internal LED which is to show the status of different states.
523 523  
524 524  * When the device starts normally, the LED will light up for 1 second.
525 -* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
482 +* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
526 526  * For each uplink probe, LED will be on for 500ms.
527 527  
528 528  == 2.7  Alarm Base on Timeout ==
529 529  
530 530  
531 -CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
488 +NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
532 532  
533 533  
534 534  (% style="color:blue" %)**1. Keep Status: Status to be monitor**
... ... @@ -544,17 +544,25 @@
544 544  
545 545  If keep time = 0, Disable Alarm Base on Timeout feature.
546 546  
547 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
504 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
548 548  
549 549  
550 550  (% style="color:blue" %)**AT Command to configure:**
551 551  
552 -(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
509 +(% style="color:blue" %)**PB14 PIN:**
553 553  
511 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
512 +
554 554  (% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
555 555  
556 556  
516 +(% style="color:blue" %)**PB15 PIN:**
557 557  
518 +(% style="color:#037691" %)**AT+TTRIG2=1,30**
519 +
520 +(% style="color:#037691" %)**AT+TTRIG2=0,0 **
521 +
522 +
558 558  == 2.8  Set debug mode ==
559 559  
560 560  
... ... @@ -576,54 +576,57 @@
576 576  [[image:image-20221021111527-19.png]]
577 577  
578 578  
544 +== 2.10  Count Mod ==
579 579  
580 -== 2.10  Set trigger mode ==
581 581  
547 +(% style="color:blue" %)**AT Command: AT+COUNTMOD**
582 582  
583 -(% style="color:blue" %)**AT Command: AT+TTRMOD**
549 +[[image:image-20221118092935-1.png]]
584 584  
585 -Feature: Set the trigger interrupt mode.
586 586  
587 -[[image:image-20221021111552-20.png]]
552 +== 2.11  Interrupt Pin Channel Mod ==
588 588  
589 589  
555 +(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
590 590  
591 -== 2.11  Set the calculate flag ==
557 +[[image:image-20221118093144-2.png]]
592 592  
593 593  
594 -Feature: Set the calculate flag
560 +== 2.12 TTRIG1/2 timeout status alarm ==
595 595  
596 -(% style="color:blue" %)**AT Command: AT+CALCFLAG**
597 597  
598 -[[image:image-20221021111711-22.png]]
563 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
599 599  
565 +(% style="color:blue" %)**AT Command: AT+TTRALARM**
600 600  
567 +[[image:image-20221118093512-3.png]]
601 601  
602 -== 2.12 Set count number ==
603 603  
570 +== 2.13  Select counting mode ==
604 604  
605 -Feature: Manually set the count number
606 606  
607 -(% style="color:blue" %)**AT Command: AT+SETCNT**
573 +(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
608 608  
609 -[[image:image-20221021111748-24.png]]
575 +When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
610 610  
577 +When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
611 611  
579 +[[image:image-20221118093658-4.png]]
612 612  
613 -== 2.13  Set the number of data to be uploaded and the recording time ==
614 614  
582 +== 2.14  Set the number of data to be uploaded and the recording time ==
615 615  
584 +
616 616  (% style="color:blue" %)**AT Command:**
617 617  
618 -(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
587 +(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
619 619  
620 -(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
589 +(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
621 621  
622 622  
592 +== 2.15  Read or Clear cached data ==
623 623  
624 -== 2.14  Read or Clear cached data ==
625 625  
626 -
627 627  (% style="color:blue" %)**AT Command:**
628 628  
629 629  (% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
... ... @@ -630,27 +630,24 @@
630 630  
631 631  (% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
632 632  
633 -[[image:image-20221021111810-25.png||height="364" width="797"]]
601 +[[image:image-20221118094227-5.png]]
634 634  
635 635  
604 +== 2.16  ​Firmware Change Log ==
636 636  
637 -== 2.15  ​Firmware Change Log ==
638 638  
607 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
639 639  
640 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
609 +Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
641 641  
642 -Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
643 643  
612 +== 2.17  ​Battery Analysis ==
644 644  
614 +=== 2.17.1  ​Battery Type ===
645 645  
646 -== 2.16  ​Battery Analysis ==
647 647  
617 +The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
648 648  
649 -=== 2.16.1  ​Battery Type ===
650 -
651 -
652 -The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
653 -
654 654  The battery is designed to last for several years depends on the actual use environment and update interval. 
655 655  
656 656  The battery-related documents as below:
... ... @@ -664,10 +664,9 @@
664 664  [[image:image-20221021111911-26.png]] ​
665 665  
666 666  
632 +=== 2.17.2  Power consumption Analyze ===
667 667  
668 -=== 2.16.2  Power consumption Analyze ===
669 669  
670 -
671 671  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
672 672  
673 673  Instruction to use as below:
... ... @@ -687,21 +687,18 @@
687 687  [[image:1666596205057-567.png]] ​
688 688  
689 689  
654 +=== 2.17.3  ​Battery Note ===
690 690  
691 -=== 2.16.3  ​Battery Note ===
692 692  
693 -
694 694  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
695 695  
696 696  
660 +=== 2.17.4  Replace the battery ===
697 697  
698 -=== 2.16.4  Replace the battery ===
699 699  
663 +The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
700 700  
701 -The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
702 702  
703 -
704 -
705 705  = 3. ​ Access NB-IoT Module =
706 706  
707 707  
... ... @@ -709,13 +709,12 @@
709 709  
710 710  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
711 711  
712 -[[image:image-20221021112006-28.png]] ​
713 713  
674 +[[image:image-20221118094449-6.png]] ​
714 714  
715 715  
716 716  = 4.  Using the AT Commands =
717 717  
718 -
719 719  == 4.1  Access AT Commands ==
720 720  
721 721  
... ... @@ -762,15 +762,21 @@
762 762  
763 763  AT+ DEBUG   : Enable or Disable debug mode
764 764  
765 -AT+ TTRIG   : Get or Set Alarm Base on Timeout
725 +AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
766 766  
767 -AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
727 +AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
768 768  
769 -AT+ CALCFLAG   : Get or Set the calculate flag
729 +AT+COUNTMOD  :  Get or Set the count mode
770 770  
771 -AT+ CLRC   : Clear current door open count
731 +AT+TTRCHANNEL  : Get or Set the number of interrupt channels
772 772  
733 +AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
773 773  
735 +AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
736 +
737 +AT+ CLRC   :  Clear current door open count
738 +
739 +
774 774  (% style="color:blue" %)**COAP Management**      
775 775  
776 776  AT+URI            : Resource parameters
... ... @@ -801,10 +801,8 @@
801 801  AT+PWORD  : Serial Access Password
802 802  
803 803  
804 -
805 805  = ​5.  FAQ =
806 806  
807 -
808 808  == 5.1 ​ How to Upgrade Firmware ==
809 809  
810 810  
... ... @@ -812,13 +812,11 @@
812 812  
813 813  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
814 814  
815 -(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
779 +(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
816 816  
817 817  
818 -
819 819  = 6.  Trouble Shooting =
820 820  
821 -
822 822  == 6.1  ​Connection problem when uploading firmware ==
823 823  
824 824  
... ... @@ -825,7 +825,6 @@
825 825  (% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
826 826  
827 827  
828 -
829 829  == 6.2  AT Command input doesn't work ==
830 830  
831 831  
... ... @@ -832,27 +832,19 @@
832 832  In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
833 833  
834 834  
835 -
836 836  = 7. ​ Order Info =
837 837  
838 838  
839 -Part Number**:** CPN01
799 +Part Number**:** NDS03A
840 840  
841 841  
842 -
843 843  = 8.  Packing Info =
844 844  
845 845  
846 846  (% style="color:blue" %)**Package Includes**:
847 847  
848 -* CPN01 Open/Close Sensor x 1
849 -* External antenna x 1
807 +* NDS03A Open/Close Door Sensor x 1
850 850  
851 -(% style="color:blue" %)**Dimension and weight**:
852 -
853 -* Size: 195 x 125 x 55 mm
854 -* Weight:   420g
855 -
856 856  = 9.  Support =
857 857  
858 858  
1670404362039-351.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1670405841875-916.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.1 KB
Content
1670405928926-116.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.7 KB
Content
1670406036256-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +181.0 KB
Content
LMDS200_10.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.5 KB
Content
image-20221207170748-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +26.1 KB
Content
image-20221207170748-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.9 KB
Content
image-20221207173200-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.7 KB
Content
image-20221207173300-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0