Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -430,8 +430,7 @@
430	430
431	431	The CPN01 has an internal LED which is to show the status of different states.
432	432
433		-* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
434		-* Then the LED will be on for 1 second means device is boot normally.
	433	+* When the device starts normally, the LED will light up for 1 second.
435	435	* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
436	436	* For each uplink probe, LED will be on for 500ms.
437	437
...	...	@@ -460,7 +460,7 @@
460	460
461	461	**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
462	462
463		-**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
	462	+**AT+TTRIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
464	464
465	465
466	466	== **2.8 Set debug mode** ==