Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 40.1 >
edited by Edwin Chen
on 2022/10/23 00:07
To version < 90.10 >
edited by Xiaoling
on 2023/05/25 18:07
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
1 +NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,34 +1,73 @@
1 1  (% style="text-align:center" %)
2 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
2 +[[image:LMDS200_10.jpg||height="572" width="572"]]
3 3  
4 +
5 +
6 +
7 +
8 +(% style="display:none" %) (%%)
9 +
10 +
11 +
12 +
13 +
14 +**Table of Contents：**
15 +
4 4  {{toc/}}
5 5  
6 -= **1. Introduction** =
7 7  
8 -== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
9 9  
10 -The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
11 11  
12 -The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
13 13  
14 -CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
15 15  
16 -CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
17 17  
18 -NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
19 -\\CPN01 supports different uplink methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
20 -\\CPN01 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
21 -\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
22 22  
23 -​
24 24  
25 -== **​1.2 Features** ==
26 += 1.  Introduction =
26 26  
28 +== 1.1 ​ What is NMDS200 NB-IoT Microwave Radar Distance Sensor ==
29 +
30 +
31 +(((
32 +The Dragino NMDS200 is a(% style="color:blue" %)** NB-IoT Microwave Radar distance sensor**(%%). It uses (% style="color:blue" %)**24Ghz Microwave**(%%) to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is (% style="color:blue" %)**more reliable for condensation / dusty environment**(%%). It can sense correct distance even there is water or thick dust on top of the sensor.
33 +)))
34 +
35 +(((
36 +The NMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
37 +)))
38 +
39 +(((
40 +NMDS200 can (% style="color:blue" %)**measure two distances**(%%): the closest object and next object behind the closest one.
41 +)))
42 +
43 +(((
44 +NMDS200 (% style="color:blue" %)**supports Alarm Feature**(%%), user can set the NMDS200 to uplink data in a short interval when the distance is out of configured range.
45 +)))
46 +
47 +(((
48 +NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
49 +)))
50 +
51 +(((
52 +NMDS200 (% style="color:blue" %)**supports different uplink**(%%) methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
53 +)))
54 +
55 +(((
56 +NMDS200 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**,(%%) It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
57 +)))
58 +
59 +(((
60 +To use NMDS200, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NMDS200 supports. If local operator support it, user needs to get a** (% style="color:blue" %)NB-IoT SIM card(%%)** from the operator and install into NMDS200 to get NB-IoT network connection.
61 +)))
62 +
63 +
64 +== ​1.2  Features ==
65 +
66 +
27 27  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
28 -* Open/Close detect
29 -* Open/Close statistics
68 +* Short uplink interval for Distance Alarm
30 30  * Monitor Battery Level
31 -* Uplink on periodically and open/close event
70 +* Microwave Radar for distance detection
32 32  * Datalog feature
33 33  * Uplink periodically
34 34  * Downlink to change configure
... ... @@ -39,107 +39,105 @@
39 39  * Micro SIM card slot for NB-IoT SIM
40 40  * 8500mAh Battery for long-term use
41 41  
42 -== **1.3  Specification** ==
43 43  
44 -**Common DC Characteristics:**
82 +== 1.3 Radar probe specification ==
45 45  
46 -* Supply Voltage: 2.1v ~~ 3.6v
47 -* Operating Temperature: -40 ~~ 85°C
48 48  
49 -**NB-IoT Spec:**
85 +* Measuring Method: FMCW
86 +* Frequency: 24.000 ~~ 24.500 GHz
87 +* Measurement output power: 6dBm
88 +* Measure range: 0.5 ~~ 20m
89 +* Accuracy: ±0.1m
90 +* Resolution: 0.01m
91 +* Horizontal Angel: 78°
92 +* Vertical Angel: 23°
50 50  
51 -* - B1 @H-FDD: 2100MHz
52 -* - B3 @H-FDD: 1800MHz
53 -* - B8 @H-FDD: 900MHz
54 -* - B5 @H-FDD: 850MHz
55 -* - B20 @H-FDD: 800MHz
56 -* - B28 @H-FDD: 700MHz
57 57  
58 -== **1.4 Installation** ==
95 +== 1.4  Storage Temperature ==
59 59  
60 -Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
61 61  
62 -[[image:image-20221021110329-1.png]]
98 + -40°C to +85°C
63 63  
64 -[[image:image-20221022234602-2.png||height="288" width="922"]]
65 65  
101 +== 1.5 ​ Applications ==
66 66  
67 -== **1.5 ​Applications** ==
68 68  
69 -* Open/Close Detection
70 -* Pulse meter application
71 -* Dry Contact Detection
104 +* Horizontal distance measurement
105 +* Liquid level measurement
106 +* Parking management system
107 +* Object proximity and presence detection
108 +* Intelligent trash can management system
109 +* Robot obstacle avoidance
110 +* Automatic control
111 +* Sewer
112 +* Bottom water level monitoring
72 72  
73 -== **1.6 Mechanical** ==
74 74  
75 -​[[image:image-20221021110415-3.png]]
115 +== 1.6  Specification ==
76 76  
77 -== ** 1.7 Pin Definitions and Switch** ==
78 78  
79 -[[image:image-20221021110429-4.png]]
118 +(% style="color:blue" %)**Common DC Characteristics:**
80 80  
81 -=== **1.7.1 Pin Definition** ===
120 +* Supply Voltage: 2.1v ~~ 3.6v
121 +* Operating Temperature: 0 ~~ 70°C
82 82  
83 -CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
123 +(% style="color:blue" %)**NB-IoT Spec:**
84 84  
125 +* B1 @H-FDD: 2100MHz
126 +* B3 @H-FDD: 1800MHz
127 +* B8 @H-FDD: 900MHz
128 +* B5 @H-FDD: 850MHz
129 +* B20 @H-FDD: 800MHz
130 +* B28 @H-FDD: 700MHz
85 85  
86 -=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
87 87  
88 -Power on Device when putting this jumper.
133 +== 1.7  Installation ==
89 89  
90 90  
91 -=== **1.7.3 BOOT MODE / SW1** ===
136 +Sensor measure direction and angle is as below. When install the sensor, please make sure the sensor direct to object.
92 92  
93 93  
94 -1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
139 +[[image:image-20221207170748-1.png]]
95 95  
96 -2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
97 97  
142 + [[image:image-20221207170748-2.png||height="345" width="634"]]
98 98  
99 -=== **1.7.4 Reset Button** ===
100 100  
145 +== 1.8  Pin Definitions and Switch ==
101 101  
102 -Press to reboot the device.
103 103  
148 +[[image:1670404362039-351.png]]
104 104  
105 -=== **1.7.5 LED** ===
106 106  
151 += 2.  Use NMDS200 to communicate with IoT Server =
107 107  
108 -The LED will blink when :
153 +== 2.1  How it works ==
109 109  
110 -1. Boot the device in flash mode
111 -1. Send an uplink packet
112 112  
156 +The NB-IoT network will forward this value to IoT server via the protocol defined by NMDS200.
113 113  
114 -= **2.  Use CPN01 to communicate with IoT Server** =
158 +The diagram below shows the working flow in the default firmware of NMDS200:
115 115  
116 -== **2.1  How it works** ==
160 +[[image:image-20221021110615-5.png||height="996" width="492"]]
117 117  
118 -The CPN01 is equipped with an NB-IoT module, the pre-loaded firmware in CPN01 will get **Open/Close Event or Count** from sensor and send the value to the NB-IoT network. The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
119 119  
120 -The diagram below shows the working flow in the default firmware of CPN01:
163 +== 2.2 ​ Configure NMDS200 ==
121 121  
122 -[[image:image-20221021110615-5.png]]
123 123  
166 +To use NMDS200 in your city, make sure to meet below requirements:
124 124  
125 -== **2.2 ​ Configure CPN01** ==
126 -
127 -=== **2.2.1 Test Requirement** ===
128 -
129 -To use CPN01 in your city, make sure to meet below requirements:
130 -
131 131  * Your local operator has already distributed an NB-IoT Network.
132 -* The local NB-IoT network used the band that CPN01 supports.
169 +* The local NB-IoT network used the band that NMDS200 supports.
133 133  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
134 134  
135 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server.
172 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NMDS200 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
136 136  
137 -[[image:image-20221023000439-3.png]]
174 +[[image:image-20221209090938-1.png]]
138 138  
139 - ​
140 140  
141 -=== **2.2.2 Insert SIM card** ===
177 +=== 2.2.1 Insert NB-IoT SIM card ===
142 142  
179 +
143 143  Insert the NB-IoT Card get from your provider.
144 144  
145 145  User needs to take out the NB-IoT module and insert the SIM card like below:
... ... @@ -147,425 +147,371 @@
147 147  [[image:image-20221021110745-6.png]] ​
148 148  
149 149  
150 -=== **2.2.3 Connect USB – TTL to CPN01 to configure it** ===
187 +=== 2.2.2 Connect USB – TTL to NMDS200 and configure it ===
151 151  
152 -User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
153 153  
154 -**Connection:**
190 +User need to configure NMDS200 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NMDS200 support AT Commands, user can use a USB to TTL adapter to connect to NMDS200 and use AT Commands to configure it, as below.
155 155  
156 - USB TTL GND <~-~-~-~-> GND
192 +(% style="color:blue" %)**Connection:**
157 157  
158 - USB TTL TXD <~-~-~-~-> UART_RXD
194 +(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
159 159  
160 - USB TTL RXD <~-~-~-~-> UART_TXD
196 +(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
161 161  
162 -In the PC, use below serial tool settings:
198 +(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
163 163  
164 -* Baud:  **9600**
165 -* Data bits:** 8**
166 -* Stop bits: **1**
167 -* Parity:  **None**
168 -* Flow Control: **None**
169 169  
170 -Make sure the switch is in FLASH position, then power on CPN01 by connecting the (% style="color:yellow" %)**Yellow Jumper**(%%).
201 +In the PC, use below serial tool settings:
171 171  
172 -​[[image:image-20221021110817-7.png]]
203 +* Baud:  (% style="color:red" %)**9600**
173 173  
174 -CPN01 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
205 +* Data bits:** (% style="color:red" %)8(%%)**
175 175  
207 +* Stop bits: (% style="color:red" %)**1**
176 176  
177 -**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
209 +* Parity:  (% style="color:red" %)**None**
178 178  
179 -=== **2.2.4 Use CoAP protocol to uplink data** ===
211 +* Flow Control: (% style="color:red" %)**None**
180 180  
181 -**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
213 +Make sure the switch is in FLASH position, then power on NMDS200 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
182 182  
183 -**Use below commands:**
215 +​[[image:image-20221021110817-7.png]]
184 184  
185 -* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
186 -* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
187 -* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
217 +NMDS200 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
188 188  
189 -For parameter description, please refer to AT command set
190 190  
191 -[[image:image-20221021110948-8.png]]
220 +(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
192 192  
193 -After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
194 194  
195 -[[image:image-20221021110956-9.png]] ​
223 +=== 2.2.3 Use CoAP protocol to uplink data ===
196 196  
197 -=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
198 198  
199 -This feature is supported since firmware version v1.0.1
226 +(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
200 200  
201 -* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
202 -* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
203 -* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
204 204  
205 -​ [[image:image-20221021111025-10.png]]
229 +(% style="color:blue" %)**Use below commands in NMDS200:**
206 206  
207 -[[image:image-20221021111033-11.png||height="241" width="576"]]
231 +* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
208 208  
209 -​
233 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
210 210  
211 -=== **2.2.6 Use MQTT protocol to uplink data** ===
235 +* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
212 212  
213 -This feature is supported since firmware version v110
237 +For parameter description, please refer to AT command set
214 214  
215 -* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
216 -* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
217 -* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
218 -* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
219 -* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
220 -* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
221 -* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
239 +[[image:1670471530120-960.png||height="647" width="674"]]
222 222  
223 -​ [[image:image-20221021111058-12.png]]
224 224  
225 -[[image:image-20221021111108-13.png]]
242 +After configuring the server address and (% style="color:green" %)**reset NMDS200**(%%) (via AT+ATZ ), NMDS200 will start to uplink sensor values to the CoAP server.
226 226  
227 -​
244 +[[image:1670405841875-916.png]] ​
228 228  
229 -MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
230 230  
231 -=== **2.2.7 Use TCP protocol to uplink data** ===
247 +=== 2.2.4 Use UDP protocol to uplink data(Default protocol) ===
232 232  
233 -This feature is supported since firmware version v110
234 234  
235 -* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
236 -* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
250 +(% style="color:blue" %)**AT Commands:**
237 237  
238 -​ [[image:image-20221021111125-14.png]]
252 +* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
239 239  
240 -[[image:image-20221021111131-15.png]]
254 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
241 241  
242 -​
256 +* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
243 243  
244 -=== **2.2.8 Change Update Interval** ===
258 +​ [[image:1670471559211-638.png]]
245 245  
246 -User can use below command to change the **uplink interval**.
247 247  
248 -* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
261 +[[image:image-20221021111033-11.png||height="241" width="576"]]
249 249  
250 -**NOTE:**
263 +​
251 251  
252 -**~1. By default, the device will send an uplink message every 1 hour.**
265 +=== 2.2.5 Use MQTT protocol to uplink data ===
253 253  
254 -== **2.3  Uplink Payload** ==
255 255  
256 -In this mode, uplink payload includes 87 bytes in total by default.
268 +(% style="color:blue" %)**AT Commands:**
257 257  
258 -Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
270 +* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
259 259  
260 -|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
261 -|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
272 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
262 262  
263 -|2|2|4|8 group
264 -|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
274 +* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
265 265  
266 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
276 +* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
267 267  
268 -[[image:image-20221021111201-16.png||height="572" width="792"]]
278 +* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
269 269  
270 -The payload is ASCII string, representative same HEX:
280 +* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
271 271  
272 -**0x (% style="color:red" %)__0xf867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %)_0c78__  __(% style="color:#00b0f0" %)17__  __(% style="color:#7030a0" %)01__  __(% style="color:#d60093" %)00__  __(% style="color:#a14d07" %)01 __ __(% style="color:#0020b0" %)__ __00__  __(% style="color:#420042" %)000009__  __(% style="color:#663300" %) 000002__  __(% style="color:#d60093" %)6315537bb__  __(% style="color:#663300" %)// 0100000b02000002663510fed__  __0100000e0200000263510f39 010000000000000063510e85 010000000000000063510d2e 010000000000000063510c7a 010000000000000063510bc6 010000000000000063510954 010000000000000063510882 //(%%)**
282 +* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
273 273  
274 -where:
275 -*(% style="color:#037691" %) **Device ID:**(%%) 0x f867787050213317 = f867787050213317
284 +​ [[image:1670471584490-640.png]]
276 276  
277 -*(% style="color:#037691" %) **Version:**(%%) 0x0064=100=1.0.0
278 278  
279 -*(% style="color:#037691" %) **BAT:**(%%) 0x0c78 = 3192 mV = 3.192V
287 +[[image:1670405928926-116.png]]
280 280  
281 -*(% style="color:#037691" %) **Singal: **(%%)0x17 = 23
289 +​
282 282  
283 -*(% style="color:#037691" %) **Mod:**(%%) 0x01 = 1
291 +MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
284 284  
285 -*(% style="color:#037691" %) **Calculate Flag:**(%%) 0x00= 0
286 286  
287 -*(% style="color:#037691" %) **Contact Status:**(%%) 0x00= 0
294 +=== 2.2.6 Use TCP protocol to uplink data ===
288 288  
289 -*(% style="color:#037691" %) **Alarm:**(%%)0x00 =0
290 290  
291 -*(% style="color:#037691" %) **Total pulse:0x09 =0**
297 +(% style="color:blue" %)**AT Commands:**
292 292  
293 -*(% style="color:#037691" %) **The last open duration:**(%%)0x02 =2
299 +* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
294 294  
295 -*(% style="color:#037691" %)**Time stamp :**(%%) 0x6315537b =1662342011
301 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
296 296  
297 -*(% style="color:#037691" %) **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000b0200002663510fed
303 +​ [[image:1670471613823-833.png]]
298 298  
299 -*(% style="color:#037691" %) **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp :**(%%) 0100000e0200002663510f39,.......
300 300  
301 -== **2.4  Payload Explanation and Sensor Interface** ==
306 +[[image:image-20221021111131-15.png]]
302 302  
303 -=== **2.4.1  Device ID** ===
308 +​
304 304  
305 -By default, the Device ID equal to the last 15 bits of IMEI.
310 +=== 2.2.7 Change Update Interval ===
306 306  
307 -User can use **AT+DEUI** to set Device ID
308 308  
309 -**Example:**
313 +User can use below command to change the (% style="color:blue" %)**uplink interval**.
310 310  
311 -AT+DEUI=868411056754138
315 +* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (4 hours)
312 312  
313 -The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
317 +(% style="color:red" %)**NOTE:**
314 314  
315 -=== **2.4.2  Version Info** ===
319 +1.  By default, the device will send an uplink message every 4 hour.
316 316  
317 -Specify the software version: 0x64=100, means firmware version 1.00.
318 318  
319 -For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
322 +== 2.3  Uplink Payload ==
320 320  
321 -=== **2.4.3  Battery Info** ===
322 322  
323 -Check the battery voltage for CPN01.
325 +The uplink payload includes 23 bytes in total by default.
324 324  
325 -Ex1: 0x0B45 = 2885mV
327 +Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
326 326  
327 -Ex2: 0x0B49 = 2889mV
328 328  
329 -=== **2.4.4  Signal Strength** ===
330 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:450px" %)
331 +|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:30px" %)**2**|(% style="width:30px" %)**2**|(% style="width:75px" %)**1**|(% style="width:30px" %)**1**|(% style="width:50px" %)**1**|(% style="width:60px" %)**2**|(% style="width:60px" %)**2**
332 +|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Exit flag|(% style="width:94px" %) [[Distance 1>>||anchor="H2.4.5A0Distance"]] |(% style="width:93px" %) [[Distance 2>>||anchor="H2.4.5A0Distance"]]
330 330  
331 -NB-IoT Network signal Strength.
334 +(% border="1" style="background-color:#ffffcc; color:green; width:429px" %)
335 +|(% style="width:60px" %)**4**|(% style="width:60px" %)**2**|(% style="width:60px" %)**2**|(% style="width:60px" %)**4**|(% style="width:100px" %)(((
336 +**1-32 group**
337 +)))
338 +|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.6A0Timestamp"]]| Distance 1 | Distance  2|(% style="width:67px" %)Time stamp|(% style="width:100px" %)...
332 332  
333 -**Ex1: 0x1d = 29**
340 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NMDS200 uplink data.
334 334  
335 -**0**  -113dBm or less
342 +[[image:1670406261143-723.png]]
336 336  
337 -**1**  -111dBm
338 338  
339 -**2...30** -109dBm... -53dBm
345 +The payload is ASCII string, representative same HEX: **0x (% style="color:red" %)__f867787050471071__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0cc3__(% style="color:#00b0f0" %) 0__9__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00ef__(% style="color:#660066" %) (% style="color:#663300" %)__013d__ (% style="color:#d60093" %)__6390453d__(%%)**
340 340  
341 -**31**   -51dBm or greater
347 +**where:**
342 342  
343 -**99**    Not known or not detectable
349 +* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050471071 = f867787050471071
344 344  
345 -=== **2.4.5 Calculate Flag** ===
351 +* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
346 346  
347 -The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
353 +* (% style="color:#037691" %)**BAT :**(%%)  0x0cc3 = 3267 mV = 3.267V
348 348  
349 -User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
355 +* (% style="color:#037691" %)**Singal: **(%%)0x09 = 9
350 350  
351 -Default value: 0. 
357 +* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
352 352  
353 -Range (6 bits): (b)000000 ~~ (b) 111111
359 +* (% style="color:#037691" %)**Exit flag: **(%%)0x00 =0
354 354  
355 -=== **2.4.6  Alarm** ===
361 +* (% style="color:#037691" %)**Distance 1: **(%%)0x00ef=239
356 356  
357 -See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
363 +* (% style="color:#037691" %)**Distance 2: **(%%)0x013d =317
358 358  
359 -=== **2.4.7 Contact Status** ===
365 +* (% style="color:#037691" %)**Timestamp: **(%%)0x6390453d =1670399293 (Unix Time)
360 360  
361 -0: Open
367 +== 2.4  Payload Explanation and Sensor Interface ==
362 362  
363 -1: Close
369 +=== 2.4.1  Device ID ===
364 364  
365 -=== **2.4.8 Total pulse** ===
366 366  
367 -Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
372 +By default, the Device ID is equal to the last 15 bits of IMEI.
368 368  
369 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
374 +User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
370 370  
371 -=== **2.4.9 The last open duration** ===
376 +**Example:**
372 372  
373 -Dry Contact last open duration.
378 +AT+DEUI=868411056754138
374 374  
375 -Unit: min.
380 +The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
376 376  
377 -[[image:image-20221021111346-17.png||height="146" width="770"]]
378 378  
383 +=== 2.4.2  Version Info ===
379 379  
380 -=== **2.4.10  Timestamp** ===
381 381  
382 -Time stamp : 0x6315537b =1662342011
386 +Specify the software version: 0x64=100, which means firmware version 1.00.
383 383  
384 -Convert Unix timestamp to time 2022-9-5 9:40:11.
388 +For example 0x00 64 : This device is NMDS200 with firmware version 1.0.0.
385 385  
386 -**~ **
387 387  
388 -== **2.5  Downlink Payload** ==
391 +=== 2.4.3  Battery Info ===
389 389  
390 -By default, CPN01 prints the downlink payload to console port.
391 391  
392 -[[image:image-20221021111414-18.png]] ​
394 +Check the battery voltage for NMDS200.
393 393  
394 -**Examples:**
396 +Ex1: 0x0B45 = 2885mV
395 395  
396 -* **Set TDC**
398 +Ex2: 0x0B49 = 2889mV
397 397  
398 -If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
399 399  
400 -Payload:    01 00 00 1E    TDC=30S
401 +=== 2.4.4  Signal Strength ===
401 401  
402 -Payload:    01 00 00 3C    TDC=60S
403 403  
404 -* **Reset**
404 +NB-IoT Network signal Strength.
405 405  
406 -If payload = 0x04FF, it will reset the NSE01
406 +(% style="color:blue" %)**Ex1: 0x1d = 29**
407 407  
408 -* **INTMOD**
408 +(% style="color:#037691" %)**0** (%%) -113dBm or less
409 409  
410 -Downlink Payload: 06000003, Set AT+INTMOD=3
410 +(% style="color:#037691" %)**1**  (%%) -111dBm
411 411  
412 -== **2.6  ​LED Indicator** ==
412 +(% style="color:#037691" %)**2...30** (%%) -109dBm... -53dBm
413 413  
414 -The CPN01 has an internal LED which is to show the status of different state.
414 +(% style="color:#037691" %)**31** (%%) -51dBm or greater
415 415  
416 -* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
417 -* Then the LED will be on for 1 second means device is boot normally.
418 -* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
419 -* For each uplink probe, LED will be on for 500ms.
416 +(% style="color:#037691" %)**99** (%%) Not known or not detectable
420 420  
421 -== **2.7  Alarm Base on Timeout** ==
422 422  
423 -CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
419 +=== 2.4.5  Distance ===
424 424  
425 425  
426 -**~1. Keep Status: Status to be monitor**
422 +[[image:1670407401682-959.png]]
427 427  
428 -Keep Status = 1: Monitor Close to Open event
429 429  
430 -Keep Status = 0: Monitor Open to Close event
425 +(% style="color:blue" %)**Object1 Distance:**
431 431  
427 +Distance between sensor probe to the first object. (unit: cm)
432 432  
433 -**2. Keep Time: Timeout to send an Alarm**
429 +For example, if the data you get from the register is 0x02 0x05, the distance between the sensor and the measured object is
434 434  
435 -Range 0 ~~ 65535(0xFFFF) seconds.
431 +(% style="color:blue" %)**0205(H) = 517 (D) = 517 cm.**
436 436  
437 -If keep time = 0, Disable Alarm Base on Timeout feature.
438 438  
439 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
434 +(% style="color:blue" %)**Object2 Distance:**
440 440  
436 +Distance between sensor probe to the second object. (unit: cm)
441 441  
442 -**AT Command** to configure:
443 443  
444 -**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
439 +=== 2.4.6  Timestamp ===
445 445  
446 -**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
447 447  
448 -== **2.8 Set debug mode** ==
442 +Timestamp : 0x6315537b =1662342011
449 449  
450 -Feature: Enable or Disable debug mode
451 451  
445 +== 2.5  Downlink Payload ==
452 452  
453 -**AT Command: AT+DEBUG**
454 454  
455 -[[image:image-20221021111629-21.png]]
448 +By default, NMDS200 prints the downlink payload to console port.
456 456  
457 -== **2.9 Clear Flash Record** ==
450 +[[image:image-20221021111414-18.png]] ​
458 458  
459 -Feature: Clear flash storage for data log feature.
460 460  
461 -**AT Command: AT+CLRDTA**
453 +**Examples:**
462 462  
463 -[[image:image-20221021111527-19.png]]
455 +* (% style="color:#037691" %)**Set TDC**
464 464  
465 -== ** 2.10 Set trigger mode** ==
457 +If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
466 466  
467 -➢ AT Command: **AT+TTRMOD**
459 +Payload:    01 00 00 1E    TDC=30S
468 468  
469 -Feature: Set the trigger interrupt mode.
461 +Payload:    01 00 00 3C    TDC=60S
470 470  
471 -[[image:image-20221021111552-20.png]]
463 +* (% style="color:#037691" %)**Reset**
472 472  
473 -== **2.11 Set the calculate flag** ==
465 +If payload = 0x04FF, it will reset the NMDS200
474 474  
475 -Feature: Set the calculate flag
467 +* (% style="color:#037691" %)**INTMOD**
476 476  
477 -**AT Command: AT+CALCFLAG**
469 +Downlink Payload: 06000003, Set AT+INTMOD=3
478 478  
479 -[[image:image-20221021111711-22.png]]
480 480  
481 -== **2.12 Set count number** ==
472 +== 2.6  ​LED Indicator ==
482 482  
483 -Feature: Manually set the count number
484 484  
485 -**AT Command: AT+SETCNT**
475 +The NMDS200 has an internal LED which is to show the status of different states.
486 486  
487 -[[image:image-20221021111748-24.png]]
477 +* When the device starts normally, the LED will light up for 1 second.
478 +* After NMDS200 join NB-IoT network. The LED will be ON for 3 seconds.
479 +* For each uplink probe, LED will be on for 500ms.
488 488  
489 -== **2.13 Set the number of data to be uploaded and the recording time** ==
481 +== 2.7  Distance alarm function ==
490 490  
491 -➢ AT Command:
492 492  
493 -AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
484 +(% style="color:blue" %)**AT Command: AT+ALARM1=min,max**
494 494  
486 +(% style="color:#037691" %)**Example 1:**
495 495  
496 -AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
488 +AT+ ALARM1 =60,200  ~/~/ Alarm when distance1 lower than 60.
497 497  
498 -== **2.14 Read or Clear cached data** ==
490 +AT+ ALARM2 =min,max
499 499  
500 -➢ AT Command:
501 501  
502 -AT+CDP    ~/~/ Read cached data
493 +(% style="color:#037691" %)**Example 2:**
503 503  
504 -[[image:image-20221021111810-25.png||height="364" width="797"]]
495 +AT+ ALARM2 =200,1500  ~/~/ Alarm when distance2 lower than 1500.
505 505  
506 506  
507 -AT+CDP=0    ~/~/ Clear cached data ​
498 +== 2.8  Set the number of data to be uploaded and the recording time ==
508 508  
509 -== **2.15  ​Firmware Change Log** ==
510 510  
511 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
501 +(% style="color:blue" %)**AT Command:**
512 512  
513 -Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
503 +(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
514 514  
515 -== **2.16  ​Battery Analysis** ==
505 +(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
516 516  
517 -=== **2.16.1  ​Battery Type** ===
518 518  
519 -The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
508 +== 2.9  Read or Clear cached data ==
520 520  
521 -The battery is designed to last for several years depends on the actually use environment and update interval. 
522 522  
523 -The battery related documents as below:
511 +(% style="color:blue" %)**AT Command:**
524 524  
525 -* [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
526 -* [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
527 -* [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
513 +(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
528 528  
529 -[[image:image-20221021111911-26.png]] ​
515 +(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
530 530  
531 -=== **2.16.2  Power consumption Analyze** ===
517 +[[image:1670408172929-569.png]]
532 532  
533 -Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
534 534  
535 -Instruction to use as below:
520 +== 2.10  ​Firmware Change Log ==
536 536  
537 -**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
538 538  
539 -**Step 2: ** Open it and choose
523 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/8elvp2qi9bcv47a/AAAKp0E2nUffztF0tYhqPoE1a?dl=0>>https://www.dropbox.com/sh/8elvp2qi9bcv47a/AAAKp0E2nUffztF0tYhqPoE1a?dl=0]]
540 540  
541 -* Product Model
542 -* Uplink Interval
543 -* Working Mode
525 +Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
544 544  
545 -And the Life expectation in difference case will be shown on the right.
546 546  
547 -[[image:image-20221021111923-27.png||height="253" width="783"]] ​
528 +== 2.11 Battery & Power Consumption ==
548 548  
549 -=== **2.16.3  ​Battery Note** ===
550 550  
551 -The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
531 +NMDS200 uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
552 552  
553 -=== **2.16.4  Replace the battery** ===
533 +[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
554 554  
555 -The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
556 556  
557 -= **3. ​ Access NB-IoT Module** =
536 += 3. ​ Access NB-IoT Module =
558 558  
538 +
559 559  Users can directly access the AT command set of the NB-IoT module.
560 560  
561 561  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
562 562  
563 -[[image:image-20221021112006-28.png]] ​
564 564  
565 -= **4.  Using the AT Commands** =
544 +[[image:image-20221118094449-6.png]] ​
566 566  
567 -== **4.1  Access AT Commands** ==
568 568  
547 += 4.  Using the AT Commands =
548 +
549 +== 4.1  Access AT Commands ==
550 +
551 +
569 569  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
570 570  
571 571  AT+<CMD>?  : Help on <CMD>
... ... @@ -576,8 +576,9 @@
576 576  
577 577  AT+<CMD>=?  : Get the value
578 578  
579 -**General Commands**      
580 580  
563 +(% style="color:blue" %)**General Commands**      
564 +
581 581  AT  : Attention       
582 582  
583 583  AT?  : Short Help     
... ... @@ -592,133 +592,112 @@
592 592  
593 593  AT+INTMOD            : Set the trigger interrupt mode
594 594  
595 -AT+5VT  : Set extend the time of 5V power  
579 +AT+5VT  : Set extend the time of 5V power  
596 596  
597 -AT+PRO  : Choose agreement
581 +AT+PRO  : Choose agreement
598 598  
599 -AT+RXDL  : Extend the sending and receiving time
583 +AT+RXDL  : Extend the sending and receiving time
600 600  
601 -AT+SERVADDR  : Server Address
585 +AT+SERVADDR  : Server Address
602 602  
603 -AT+TR      : Get or Set record time"
587 +AT+TR      :  Get or Set record time
604 604  
589 +AT+NOUD :  Get or Set the number of data to be uploaded
605 605  
606 -AT+NOUD      : Get or Set the number of data to be uploaded
591 +AT+CDP     :  Read or Clear cached data
607 607  
593 +AT+DEBUG:  Enable or Disable debug mode
608 608  
609 -AT+CDP     : Read or Clear cached data
595 +AT+ALARM1:  Get or Set alarm of distance1
610 610  
597 +AT+ALARM2:  Get or Set alarm of distance2
611 611  
612 -AT+ DEBUG   : Enable or Disable debug mode
599 +AT+GETSENSORVALUE :  Returns the current sensor measurement
613 613  
614 -AT+ TTRIG   : Get or Set Alarm Base on Timeout
601 +AT+POWERIC :  Get or set the Power IC flag
615 615  
616 -AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
617 617  
618 -AT+ CALCFLAG   : Get or Set the calculate flag
604 +(% style="color:blue" %)**COAP Management**      
619 619  
620 -AT+ CLRC   : Clear current door open count
606 +AT+URI :  Resource parameters
621 621  
622 -**COAP Management**      
623 623  
624 -AT+URI            : Resource parameters
609 +(% style="color:blue" %)**UDP Management**
625 625  
626 -**UDP Management**
611 +AT+CFM :  Upload confirmation mode (only valid for UDP)
627 627  
628 -AT+CFM          : Upload confirmation mode (only valid for UDP)
629 629  
630 -**MQTT Management**
614 +(% style="color:blue" %)**MQTT Management**
631 631  
632 -AT+CLIENT               : Get or Set MQTT client
616 +AT+CLIENT  : Get or Set MQTT client
633 633  
634 -AT+UNAME  : Get or Set MQTT Username
618 +AT+UNAME : Get or Set MQTT Username
635 635  
636 -AT+PWD                  : Get or Set MQTT password
620 +AT+PWD  :  Get or Set MQTT password
637 637  
638 -AT+PUBTOPIC  : Get or Set MQTT publish topic
622 +AT+PUBTOPIC :  Get or Set MQTT publish topic
639 639  
640 -AT+SUBTOPIC  : Get or Set MQTT subscription topic
624 +AT+SUBTOPIC :  Get or Set MQTT subscription topic
641 641  
642 -**Information**          
643 643  
644 -AT+FDR  : Factory Data Reset
627 +(% style="color:blue" %)**Information**          
645 645  
646 -AT+PWORD  : Serial Access Password
629 +AT+FDR :  Factory Data Reset
647 647  
648 -= **​5.  FAQ** =
631 +AT+PWORD :  Serial Access Password
649 649  
650 -== **5.1 ​ How to Upgrade Firmware** ==
651 651  
652 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
634 += ​5.  FAQ =
653 653  
654 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
636 +== 5.1 ​ How to Upgrade Firmware ==
655 655  
656 -**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
657 657  
658 -== **5.2  Can I calibrate CPN01 to different soil types?** ==
639 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
659 659  
660 -CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
641 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
661 661  
662 -= **6.  Trouble Shooting** =
643 +(% style="color:red" %)**Notice: **(% style="color:blue" %)**NMDS200** (%%)**and (% style="color:blue" %)LMDS200(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
663 663  
664 -== **6.1  ​Connection problem when uploading firmware** ==
665 665  
666 -**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
646 += 6.  Trouble Shooting =
667 667  
668 -== **6.2  AT Command input doesn't work** ==
648 +== 6.1  ​Connection problem when uploading firmware ==
669 669  
670 -In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
671 671  
672 -= **7. ​ Order Info** =
651 +(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
673 673  
674 -Part Number**:** CPN01
675 675  
676 -= **8.  Packing Info** =
654 +== 6.2  AT Command input doesn't work ==
677 677  
678 -**Package Includes**:
679 679  
680 -* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
681 -* External antenna x 1
657 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
682 682  
683 -**Dimension and weight**:
684 684  
685 -* Size: 195 x 125 x 55 mm
686 -* Weight:   420g
660 +== 6.3 Not able to connect to NB-IoT network and keep showing "Signal Strength:99". ==
687 687  
688 -= **9.  Support** =
689 689  
690 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
691 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
663 +This means sensor is trying to join the NB-IoT network but fail. Please see this link for **//[[trouble shooting for signal strenght:99>>doc:Main.CSQ\:99,99.WebHome]]//**.
692 692  
693 -​
694 694  
666 += 7. ​ Order Info =
695 695  
696 696  
669 +Part Number:(% style="color:blue" %)** NMDS200**
697 697  
698 698  
672 += 8.  Packing Info =
699 699  
700 700  
675 +(% style="color:blue" %)**Package Includes**:
701 701  
677 +* NMDS200 NB-IoT Microwave Radar Distance Sensor x 1
702 702  
703 703  
680 += 9.  Support =
704 704  
705 705  
683 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
706 706  
685 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
707 707  
708 -
709 -
710 -
711 -
712 -
713 -
714 -
715 -
716 -
717 -
718 -
719 -
720 -
721 -
722 -
723 -
724 -
687 +​
1666596205057-567.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +179.8 KB
Content
1670404362039-351.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1670405841875-916.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.1 KB
Content
1670405928926-116.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.7 KB
Content
1670406036256-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +181.0 KB
Content
1670406261143-723.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.9 KB
Content
1670407401682-959.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +23.7 KB
Content
1670408172929-569.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +211.8 KB
Content
1670471530120-960.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +67.6 KB
Content
1670471559211-638.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +170.6 KB
Content
1670471584490-640.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.1 KB
Content
1670471613823-833.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +181.0 KB
Content
LMDS200_10.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.5 KB
Content
image-20221207170748-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +26.1 KB
Content
image-20221207170748-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.9 KB
Content
image-20221207173200-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.7 KB
Content
image-20221207173300-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.0 KB
Content
image-20221208090742-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +79.7 KB
Content
image-20221209090938-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20221212171610-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +756.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0