Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 3 removed)
  • image-20221022234529-1.png
  • image-20221022234602-2.png
  • image-20221023000439-3.png

Details

Page properties

Content

...	...	@@ -7,11 +7,11 @@
7	7
8	8	== **1.1 ​**What is CPN01 **NB-IoT** Pulse/Contact Sensor ==
9	9
10		-The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via NB-IoT network. User can see the (% style="color:blue" %)**dry contact status, open time, and open counts**(%%) in the IoT Server.
	10	+The Dragino CPN01 is an (% style="color:blue" %)**NB-IoT Dry Contact Sensor**(%%). It detects open/close status and uplinks the info to IoT server via Nb-IoT network. User can see the dry contact status, open time, and open counts in the IoT Server.
11	11
12		-The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each Open/Close event, instead, device can count each open event and uplink periodically.
	12	+The CPN01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculates the last open duration. Users can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
13	13
14		-CPN01 has** (% style="color:blue" %)Open-Alarm feature(%%)**, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
	14	+CPN01 has Open-Alarm feature, user can set this feature so CPN01 will send an alarm if the contact has been open exceeds a certain time.
15	15
16	16	CPN01 is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
17	17
...	...	@@ -21,7 +21,6 @@
21	21	\\To use CPN01, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that CPN01 supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into CPN01 to get NB-IoT network connection.
22	22
23	23	​
24		-
25	25	== **​1.2 Features** ==
26	26
27	27	* NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
...	...	@@ -57,13 +57,12 @@
57	57
58	58	== **1.4 Installation** ==
59	59
60		-Connect CPN01 to an Open Close sensor like below. So it can detect the Open/Close event.
	59	+Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
61	61
62	62	[[image:image-20221021110329-1.png]]
63	63
64		-[[image:image-20221022234602-2.png||height="288" width="922"]]
	63	+[[image:image-20221021110340-2.png]]
65	65
66		-
67	67	== **1.5 ​Applications** ==
68	68
69	69	* Open/Close Detection
...	...	@@ -70,7 +70,6 @@
70	70	* Pulse meter application
71	71	* Dry Contact Detection
72	72
73		-
74	74	== **1.6 Mechanical** ==
75	75
76	76	​[[image:image-20221021110415-3.png]]
...	...	@@ -81,22 +81,24 @@
81	81
82	82	=== **1.7.1 Pin Definition** ===
83	83
84		-CPN01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the **[[LSN50v2 User Manual>>doc:Main.User Manual for LoRaWAN End Nodes.LSN50 & LSN50-V2 - LoRaWAN Sensor Node User Manual.WebHome]]**.
	81	+CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
85	85
86		-
87	87	=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
88	88
	85	+
89	89	Power on Device when putting this jumper.
90	90
91	91
	89	+
92	92	=== **1.7.3 BOOT MODE / SW1** ===
93	93
94	94
95		-1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
	93	+1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
96	96
97		-2) Flash: working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
	95	+2) Flash: work mode, the device starts to work and send out console output for further debug
98	98
99	99
	98	+
100	100	=== **1.7.4 Reset Button** ===
101	101
102	102
...	...	@@ -107,12 +107,11 @@
107	107	=== **1.7.5 LED** ===
108	108
109	109
110		-The LED will blink when :
	109	+It will flash:
111	111
112	112	1. Boot the device in flash mode
113	113	1. Send an uplink packet
114	114
115		-
116	116	= **2.  Use CPN01 to communicate with IoT Server** =
117	117
118	118	== **2.1  How it works** ==

image-20221022234529-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Edwin

Size

...	...	@@ -1,1 +1,0 @@
1		-43.3 KB

Content

image-20221022234602-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Edwin

Size

...	...	@@ -1,1 +1,0 @@
1		-135.7 KB

Content

image-20221023000439-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.Edwin

Size

...	...	@@ -1,1 +1,0 @@
1		-82.1 KB

Content