Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 31.1 >
edited by David Huang
on 2022/10/21 11:21
To version < 90.10 >
edited by Xiaoling
on 2023/05/25 18:07
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
1 +NMDS200 - NB-IoT Microwave Radar Distance Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.David
1 +XWiki.Xiaoling
Content
... ... @@ -1,36 +1,75 @@
1 1  (% style="text-align:center" %)
2 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
2 +[[image:LMDS200_10.jpg||height="572" width="572"]]
3 3  
4 4  
5 -= **1. Introduction** =
6 6  
7 -== **1.1 ​**What is CPN01 **NB-IOT** Pulse/Contact Sensor ==
8 8  
9 -The Dragino CPL01 is a **NB-IOT Contact Sensor**. It detects open/close status and uplink to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
10 10  
11 -The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
8 +(% style="display:none" %) (%%)
12 12  
13 -CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open for a certain time.
14 14  
15 -CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
16 16  
17 -NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
18 -\\CPN01 supports different uplink methods include **TCP,MQTT,UDP and CoAP  **for different application requirement.
19 -\\CPN01 is powered by  **8500mAh Li-SOCI2 battery**, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
20 -\\To use CPN01, user needs to check if there is NB-IoT coverage in local area and with the bands CPN01 supports. If the local operate support it, user needs to get a **NB-IoT SIM card** from local operator and install CPN01 to get NB-IoT network connection
21 21  
22 -​
23 23  
14 +**Table of Contents：**
24 24  
25 -== **​1.2 Features** ==
16 +{{toc/}}
26 26  
18 +
19 +
20 +
21 +
22 +
23 +
24 +
25 +
26 += 1.  Introduction =
27 +
28 +== 1.1 ​ What is NMDS200 NB-IoT Microwave Radar Distance Sensor ==
29 +
30 +
31 +(((
32 +The Dragino NMDS200 is a(% style="color:blue" %)** NB-IoT Microwave Radar distance sensor**(%%). It uses (% style="color:blue" %)**24Ghz Microwave**(%%) to detect the distance between sensor and different objects. Compare vs ultrasonic or Lidar measurement method, Microwave Radar is (% style="color:blue" %)**more reliable for condensation / dusty environment**(%%). It can sense correct distance even there is water or thick dust on top of the sensor.
33 +)))
34 +
35 +(((
36 +The NMDS200 can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
37 +)))
38 +
39 +(((
40 +NMDS200 can (% style="color:blue" %)**measure two distances**(%%): the closest object and next object behind the closest one.
41 +)))
42 +
43 +(((
44 +NMDS200 (% style="color:blue" %)**supports Alarm Feature**(%%), user can set the NMDS200 to uplink data in a short interval when the distance is out of configured range.
45 +)))
46 +
47 +(((
48 +NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technology**(%%) developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity, and spectrum efficiency, especially in deep coverage.
49 +)))
50 +
51 +(((
52 +NMDS200 (% style="color:blue" %)**supports different uplink**(%%) methods including (% style="color:blue" %)**TCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
53 +)))
54 +
55 +(((
56 +NMDS200 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**,(%%) It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
57 +)))
58 +
59 +(((
60 +To use NMDS200, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NMDS200 supports. If local operator support it, user needs to get a** (% style="color:blue" %)NB-IoT SIM card(%%)** from the operator and install into NMDS200 to get NB-IoT network connection.
61 +)))
62 +
63 +
64 +== ​1.2  Features ==
65 +
66 +
27 27  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
28 -* Open/Close detect
29 -* Open/Close statistics
68 +* Short uplink interval for Distance Alarm
30 30  * Monitor Battery Level
31 -* Uplink on periodically and open/close event
70 +* Microwave Radar for distance detection
32 32  * Datalog feature
33 -* Uplink on periodically
72 +* Uplink periodically
34 34  * Downlink to change configure
35 35  * Wall Mountable
36 36  * Outdoor Use
... ... @@ -37,517 +37,479 @@
37 37  * Ultra-Low Power consumption
38 38  * AT Commands to change parameters
39 39  * Micro SIM card slot for NB-IoT SIM
40 -* 8500mAh Battery for long term use
79 +* 8500mAh Battery for long-term use
41 41  
42 -== **1.3  Specification** ==
43 43  
44 -**Common DC Characteristics:**
82 +== 1.3 Radar probe specification ==
45 45  
46 -* Supply Voltage: 2.1v ~~ 3.6v
47 -* Operating Temperature: -40 ~~ 85°C
48 48  
49 -**NB-IoT Spec:**
85 +* Measuring Method: FMCW
86 +* Frequency: 24.000 ~~ 24.500 GHz
87 +* Measurement output power: 6dBm
88 +* Measure range: 0.5 ~~ 20m
89 +* Accuracy: ±0.1m
90 +* Resolution: 0.01m
91 +* Horizontal Angel: 78°
92 +* Vertical Angel: 23°
50 50  
51 -* - B1 @H-FDD: 2100MHz
52 -* - B3 @H-FDD: 1800MHz
53 -* - B8 @H-FDD: 900MHz
54 -* - B5 @H-FDD: 850MHz
55 -* - B20 @H-FDD: 800MHz
56 -* - B28 @H-FDD: 700MHz
57 57  
58 -== **1.4 Installation** ==
95 +== 1.4  Storage Temperature ==
59 59  
60 -Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
61 61  
62 -[[image:image-20221021110329-1.png]]
98 + -40°C to +85°C
63 63  
64 -[[image:image-20221021110340-2.png]]
65 65  
66 -== **1.5 ​Applications** ==
101 +== 1.5 ​ Applications ==
67 67  
68 -* Open/Close Detection
69 -* Pulse meter application
70 -* Dry Contact Detection
71 71  
72 -== **1.6 Mechanical** ==
104 +* Horizontal distance measurement
105 +* Liquid level measurement
106 +* Parking management system
107 +* Object proximity and presence detection
108 +* Intelligent trash can management system
109 +* Robot obstacle avoidance
110 +* Automatic control
111 +* Sewer
112 +* Bottom water level monitoring
73 73  
74 -​[[image:image-20221021110415-3.png]]
75 75  
76 -== ** 1.7 Pin Definitions and Switch** ==
115 +== 1.6  Specification ==
77 77  
78 -[[image:image-20221021110429-4.png]]
79 79  
80 -=== **1.7.1 Pin Definition** ===
118 +(% style="color:blue" %)**Common DC Characteristics:**
81 81  
82 -CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
120 +* Supply Voltage: 2.1v ~~ 3.6v
121 +* Operating Temperature: 0 ~~ 70°C
83 83  
84 -=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
123 +(% style="color:blue" %)**NB-IoT Spec:**
85 85  
125 +* B1 @H-FDD: 2100MHz
126 +* B3 @H-FDD: 1800MHz
127 +* B8 @H-FDD: 900MHz
128 +* B5 @H-FDD: 850MHz
129 +* B20 @H-FDD: 800MHz
130 +* B28 @H-FDD: 700MHz
86 86  
87 -Power on Device when putting this jumper.
88 88  
133 +== 1.7  Installation ==
89 89  
90 90  
91 -=== **1.7.3 BOOT MODE / SW1** ===
136 +Sensor measure direction and angle is as below. When install the sensor, please make sure the sensor direct to object.
92 92  
93 93  
94 -1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
139 +[[image:image-20221207170748-1.png]]
95 95  
96 -2) Flash: work mode, the device starts to work and send out console output for further debug
97 97  
142 + [[image:image-20221207170748-2.png||height="345" width="634"]]
98 98  
99 99  
100 -=== **1.7.4 Reset Button** ===
145 +== 1.8  Pin Definitions and Switch ==
101 101  
102 102  
103 -Press to reboot the device.
148 +[[image:1670404362039-351.png]]
104 104  
105 -== ==
106 106  
107 -=== **1.7.5 LED** ===
151 += 2.  Use NMDS200 to communicate with IoT Server =
108 108  
153 +== 2.1  How it works ==
109 109  
110 -It will flash:
111 111  
112 -1. Boot the device in flash mode
113 -1. Send an uplink packet
156 +The NB-IoT network will forward this value to IoT server via the protocol defined by NMDS200.
114 114  
115 -= **2.  Use CPN01 to communicate with IoT Server** =
158 +The diagram below shows the working flow in the default firmware of NMDS200:
116 116  
117 -== **2.1  How it works** ==
160 +[[image:image-20221021110615-5.png||height="996" width="492"]]
118 118  
119 -The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
120 120  
121 -The diagram below shows the working flow in default firmware of CPN01:
163 +== 2.2 ​ Configure NMDS200 ==
122 122  
123 -[[image:image-20221021110615-5.png]]
124 124  
125 -== **2.2 ​ Configure the CPN01** ==
166 +To use NMDS200 in your city, make sure to meet below requirements:
126 126  
127 -=== **2.2.1 Test Requirement** ===
168 +* Your local operator has already distributed an NB-IoT Network.
169 +* The local NB-IoT network used the band that NMDS200 supports.
170 +* Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
128 128  
129 -To use CPN01 in your city, make sure meet below requirements:
172 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NMDS200 will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
130 130  
131 -* Your local operator has already distributed a NB-IoT Network there.
132 -* The local NB-IoT network used the band that CPN01 supports.
133 -* Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
174 +[[image:image-20221209090938-1.png]]
134 134  
135 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
136 136  
137 - ​
177 +=== 2.2.1 Insert NB-IoT SIM card ===
138 138  
139 -=== **2.2.2 Insert SIM card** ===
140 140  
141 141  Insert the NB-IoT Card get from your provider.
142 142  
143 -User need to take out the NB-IoT module and insert the SIM card like below:
182 +User needs to take out the NB-IoT module and insert the SIM card like below:
144 144  
145 145  [[image:image-20221021110745-6.png]] ​
146 146  
147 -=== **2.2.3 Connect USB – TTL to CPN01 to configure it** ===
148 148  
149 -User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
187 +=== 2.2.2 Connect USB – TTL to NMDS200 and configure it ===
150 150  
151 -**Connection:**
152 152  
153 - USB TTL GND <~-~-~-~-> GND
190 +User need to configure NMDS200 via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NMDS200 support AT Commands, user can use a USB to TTL adapter to connect to NMDS200 and use AT Commands to configure it, as below.
154 154  
155 - USB TTL TXD <~-~-~-~-> UART_RXD
192 +(% style="color:blue" %)**Connection:**
156 156  
157 - USB TTL RXD <~-~-~-~-> UART_TXD
194 +(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
158 158  
196 +(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
197 +
198 +(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
199 +
200 +
159 159  In the PC, use below serial tool settings:
160 160  
161 -* Baud:  **9600**
162 -* Data bits:** 8**
163 -* Stop bits: **1**
164 -* Parity:  **None**
165 -* Flow Control: **None**
203 +* Baud:  (% style="color:red" %)**9600**
166 166  
167 -Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
205 +* Data bits:** (% style="color:red" %)8(%%)**
168 168  
207 +* Stop bits: (% style="color:red" %)**1**
208 +
209 +* Parity:  (% style="color:red" %)**None**
210 +
211 +* Flow Control: (% style="color:red" %)**None**
212 +
213 +Make sure the switch is in FLASH position, then power on NMDS200 by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
214 +
169 169  ​[[image:image-20221021110817-7.png]]
170 170  
171 -**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
217 +NMDS200 will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
172 172  
173 -=== **2.2.4 Use CoAP protocol to uplink data** ===
174 174  
175 -**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
220 +(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 176  
177 -**Use below commands:**
178 178  
179 -* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
180 -* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
181 -* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
223 +=== 2.2.3 Use CoAP protocol to uplink data ===
182 182  
225 +
226 +(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
227 +
228 +
229 +(% style="color:blue" %)**Use below commands in NMDS200:**
230 +
231 +* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
232 +
233 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
234 +
235 +* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
236 +
183 183  For parameter description, please refer to AT command set
184 184  
185 -[[image:image-20221021110948-8.png]]
239 +[[image:1670471530120-960.png||height="647" width="674"]]
186 186  
187 -After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
188 188  
189 -[[image:image-20221021110956-9.png]] ​
242 +After configuring the server address and (% style="color:green" %)**reset NMDS200**(%%) (via AT+ATZ ), NMDS200 will start to uplink sensor values to the CoAP server.
190 190  
191 -=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
244 +[[image:1670405841875-916.png]] ​
192 192  
193 -This feature is supported since firmware version v1.0.1
194 194  
195 -* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
196 -* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
197 -* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
247 +=== 2.2.4 Use UDP protocol to uplink data(Default protocol) ===
198 198  
199 -​ ​​​​​​​[[image:image-20221021111025-10.png]]
200 200  
201 -[[image:image-20221021111033-11.png||height="241" width="576"]]
250 +(% style="color:blue" %)**AT Commands:**
202 202  
203 -​
252 +* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
204 204  
205 -=== **2.2.6 Use MQTT protocol to uplink data** ===
254 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
206 206  
207 -This feature is supported since firmware version v110
256 +* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
208 208  
209 -* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
210 -* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
211 -* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
212 -* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
213 -* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
214 -* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
215 -* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
258 +​ [[image:1670471559211-638.png]]
216 216  
217 -​ ​​​​​​​[[image:image-20221021111058-12.png]]
218 218  
219 -[[image:image-20221021111108-13.png]]
261 +[[image:image-20221021111033-11.png||height="241" width="576"]]
220 220  
221 221  ​
222 222  
223 -MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
265 +=== 2.2.5 Use MQTT protocol to uplink data ===
224 224  
225 -=== **2.2.7 Use TCP protocol to uplink data** ===
226 226  
227 -This feature is supported since firmware version v110
268 +(% style="color:blue" %)**AT Commands:**
228 228  
229 -* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
230 -* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
270 +* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
231 231  
232 -​ ​​​​​​​[[image:image-20221021111125-14.png]]
272 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
233 233  
234 -[[image:image-20221021111131-15.png]]
274 +* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
235 235  
236 -​
276 +* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
237 237  
238 -=== **2.2.8 Change Update Interval** ===
278 +* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
239 239  
240 -User can use below command to change the **uplink interval**.
280 +* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
241 241  
242 -* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
282 +* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
243 243  
244 -**NOTE:**
284 +​ [[image:1670471584490-640.png]]
245 245  
246 -**~1. By default, the device will send an uplink message every 1 hour.**
247 247  
248 -== **2.3  Uplink Payload** ==
287 +[[image:1670405928926-116.png]]
249 249  
250 -In this mode, uplink payload includes 87 bytes in total by default.
289 +​
251 251  
252 -Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
291 +MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
253 253  
254 -|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
255 -|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
256 256  
257 -|2|2|4|8 group
258 -|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
294 +=== 2.2.6 Use TCP protocol to uplink data ===
259 259  
260 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
261 261  
262 -[[image:image-20221021111201-16.png||height="572" width="792"]]
297 +(% style="color:blue" %)**AT Commands:**
263 263  
264 -The payload is ASCII string, representative same HEX:
299 +* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
265 265  
266 -0xf86778705021331700640c7817010001000000090000026315537b 0100000b02000002663510fed0100000e0200000263510f39010000000000000063510e85010000000000000063510d2e010000000000000063510c7a010000000000000063510bc6010000000000000063510954010000000000000063510882 where:
301 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
267 267  
268 -* **Device ID: 0x f867787050213317 = f867787050213317**
269 -* **Version: 0x0064=100=1.0.0**
303 +​ [[image:1670471613823-833.png]]
270 270  
271 -* **BAT: 0x0c78 = 3192 mV = 3.192V**
272 -* **Singal: 0x17 = 23**
273 -* **Mod: 0x01 = 1**
274 -* **Calculate Flag: 0x00= 0**
275 -* **Contact Status: 0x00= 0**
276 -* **Alarm:0x00 =0**
277 -* **Total pulse:0x09 =0**
278 -* **The last open duration:0x02 =2**
279 -* **Time stamp : 0x6315537b =1662342011**
280 -* **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000b0200002663510fed**
281 -* **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000e0200002663510f39,.......**
282 282  
283 -== **2.4  Payload Explanation and Sensor Interface** ==
306 +[[image:image-20221021111131-15.png]]
284 284  
285 -=== **2.4.1  Device ID** ===
308 +​
286 286  
287 -By default, the Device ID equal to the last 15 bits of IMEI.
310 +=== 2.2.7 Change Update Interval ===
288 288  
289 -User can use **AT+DEUI** to set Device ID
290 290  
291 -**Example:**
313 +User can use below command to change the (% style="color:blue" %)**uplink interval**.
292 292  
293 -AT+DEUI=868411056754138
315 +* (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (4 hours)
294 294  
295 -The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
317 +(% style="color:red" %)**NOTE:**
296 296  
297 -=== **2.4.2  Version Info** ===
319 +1.  By default, the device will send an uplink message every 4 hour.
298 298  
299 -Specify the software version: 0x64=100, means firmware version 1.00.
300 300  
301 -For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
322 +== 2.3  Uplink Payload ==
302 302  
303 -=== **2.4.3  Battery Info** ===
304 304  
305 -Check the battery voltage for CPN01.
325 +The uplink payload includes 23 bytes in total by default.
306 306  
307 -Ex1: 0x0B45 = 2885mV
327 +Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
308 308  
309 -Ex2: 0x0B49 = 2889mV
310 310  
311 -=== **2.4.4  Signal Strength** ===
330 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:450px" %)
331 +|=(% scope="row" style="width: 60px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:30px" %)**2**|(% style="width:30px" %)**2**|(% style="width:75px" %)**1**|(% style="width:30px" %)**1**|(% style="width:50px" %)**1**|(% style="width:60px" %)**2**|(% style="width:60px" %)**2**
332 +|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Exit flag|(% style="width:94px" %) [[Distance 1>>||anchor="H2.4.5A0Distance"]] |(% style="width:93px" %) [[Distance 2>>||anchor="H2.4.5A0Distance"]]
312 312  
313 -NB-IoT Network signal Strength.
334 +(% border="1" style="background-color:#ffffcc; color:green; width:429px" %)
335 +|(% style="width:60px" %)**4**|(% style="width:60px" %)**2**|(% style="width:60px" %)**2**|(% style="width:60px" %)**4**|(% style="width:100px" %)(((
336 +**1-32 group**
337 +)))
338 +|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.6A0Timestamp"]]| Distance 1 | Distance  2|(% style="width:67px" %)Time stamp|(% style="width:100px" %)...
314 314  
315 -**Ex1: 0x1d = 29**
340 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NMDS200 uplink data.
316 316  
317 -**0**  -113dBm or less
342 +[[image:1670406261143-723.png]]
318 318  
319 -**1**  -111dBm
320 320  
321 -**2...30** -109dBm... -53dBm
345 +The payload is ASCII string, representative same HEX: **0x (% style="color:red" %)__f867787050471071__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0cc3__(% style="color:#00b0f0" %) 0__9__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00ef__(% style="color:#660066" %) (% style="color:#663300" %)__013d__ (% style="color:#d60093" %)__6390453d__(%%)**
322 322  
323 -**31**   -51dBm or greater
347 +**where:**
324 324  
325 -**99**    Not known or not detectable
349 +* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050471071 = f867787050471071
326 326  
327 -=== **2.4.5 Calculate Flag** ===
351 +* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
328 328  
329 -The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
353 +* (% style="color:#037691" %)**BAT :**(%%)  0x0cc3 = 3267 mV = 3.267V
330 330  
331 -User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
355 +* (% style="color:#037691" %)**Singal: **(%%)0x09 = 9
332 332  
333 -Default value: 0. 
357 +* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
334 334  
335 -Range (6 bits): (b)000000 ~~ (b) 111111
359 +* (% style="color:#037691" %)**Exit flag: **(%%)0x00 =0
336 336  
337 -=== **2.4.6  Alarm** ===
361 +* (% style="color:#037691" %)**Distance 1: **(%%)0x00ef=239
338 338  
339 -See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
363 +* (% style="color:#037691" %)**Distance 2: **(%%)0x013d =317
340 340  
341 -=== **2.4.7 Contact Status** ===
365 +* (% style="color:#037691" %)**Timestamp: **(%%)0x6390453d =1670399293 (Unix Time)
342 342  
343 -0: Open
367 +== 2.4  Payload Explanation and Sensor Interface ==
344 344  
345 -1: Close
369 +=== 2.4.1  Device ID ===
346 346  
347 -=== **2.4.8 Total pulse** ===
348 348  
349 -Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
372 +By default, the Device ID is equal to the last 15 bits of IMEI.
350 350  
351 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
374 +User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
352 352  
353 -=== **2.4.9 The last open duration** ===
376 +**Example:**
354 354  
355 -Dry Contact last open duration.
378 +AT+DEUI=868411056754138
356 356  
357 -Unit: min.
380 +The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
358 358  
359 -[[image:image-20221021111346-17.png||height="146" width="770"]]
360 360  
383 +=== 2.4.2  Version Info ===
361 361  
362 -=== **2.4.10  Timestamp** ===
363 363  
364 -Time stamp : 0x6315537b =1662342011
386 +Specify the software version: 0x64=100, which means firmware version 1.00.
365 365  
366 -Convert Unix timestamp to time 2022-9-5 9:40:11.
388 +For example 0x00 64 : This device is NMDS200 with firmware version 1.0.0.
367 367  
368 -**~ **
369 369  
370 -== **2.5  Downlink Payload** ==
391 +=== 2.4.3  Battery Info ===
371 371  
372 -By default, CPN01 prints the downlink payload to console port.
373 373  
374 -[[image:image-20221021111414-18.png]] ​
394 +Check the battery voltage for NMDS200.
375 375  
376 -**Examples:**
396 +Ex1: 0x0B45 = 2885mV
377 377  
378 -* **Set TDC**
398 +Ex2: 0x0B49 = 2889mV
379 379  
380 -If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
381 381  
382 -Payload:    01 00 00 1E    TDC=30S
401 +=== 2.4.4  Signal Strength ===
383 383  
384 -Payload:    01 00 00 3C    TDC=60S
385 385  
386 -* **Reset**
404 +NB-IoT Network signal Strength.
387 387  
388 -If payload = 0x04FF, it will reset the NSE01
406 +(% style="color:blue" %)**Ex1: 0x1d = 29**
389 389  
390 -* **INTMOD**
408 +(% style="color:#037691" %)**0** (%%) -113dBm or less
391 391  
392 -Downlink Payload: 06000003, Set AT+INTMOD=3
410 +(% style="color:#037691" %)**1**  (%%) -111dBm
393 393  
394 -== **2.6  ​LED Indicator** ==
412 +(% style="color:#037691" %)**2...30** (%%) -109dBm... -53dBm
395 395  
396 -The CPN01 has an internal LED which is to show the status of different state.
414 +(% style="color:#037691" %)**31** (%%) -51dBm or greater
397 397  
398 -* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
399 -* Then the LED will be on for 1 second means device is boot normally.
400 -* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
401 -* For each uplink probe, LED will be on for 500ms.
416 +(% style="color:#037691" %)**99** (%%) Not known or not detectable
402 402  
403 -== **2.7  Alarm Base on Timeout** ==
404 404  
405 -CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
419 +=== 2.4.5  Distance ===
406 406  
407 407  
408 -**~1. Keep Status: Status to be monitor**
422 +[[image:1670407401682-959.png]]
409 409  
410 -Keep Status = 1: Monitor Close to Open event
411 411  
412 -Keep Status = 0: Monitor Open to Close event
425 +(% style="color:blue" %)**Object1 Distance:**
413 413  
427 +Distance between sensor probe to the first object. (unit: cm)
414 414  
415 -**2. Keep Time: Timeout to send an Alarm**
429 +For example, if the data you get from the register is 0x02 0x05, the distance between the sensor and the measured object is
416 416  
417 -Range 0 ~~ 65535(0xFFFF) seconds.
431 +(% style="color:blue" %)**0205(H) = 517 (D) = 517 cm.**
418 418  
419 -If keep time = 0, Disable Alarm Base on Timeout feature.
420 420  
421 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
434 +(% style="color:blue" %)**Object2 Distance:**
422 422  
436 +Distance between sensor probe to the second object. (unit: cm)
423 423  
424 -**AT Command** to configure:
425 425  
426 -**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
439 +=== 2.4.6  Timestamp ===
427 427  
428 -**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
429 429  
430 -== **2.8 Set debug mode** ==
442 +Timestamp : 0x6315537b =1662342011
431 431  
432 -Feature: Enable or Disable debug mode
433 433  
445 +== 2.5  Downlink Payload ==
434 434  
435 -**AT Command: AT+DEBUG**
436 436  
437 -[[image:image-20221021111629-21.png]]
448 +By default, NMDS200 prints the downlink payload to console port.
438 438  
439 -== **2.9 Clear Flash Record** ==
450 +[[image:image-20221021111414-18.png]] ​
440 440  
441 -Feature: Clear flash storage for data log feature.
442 442  
443 -**AT Command: AT+CLRDTA**
453 +**Examples:**
444 444  
445 -[[image:image-20221021111527-19.png]]
455 +* (% style="color:#037691" %)**Set TDC**
446 446  
447 -== ** 2.10 Set trigger mode** ==
457 +If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
448 448  
449 -➢ AT Command: **AT+TTRMOD**
459 +Payload:    01 00 00 1E    TDC=30S
450 450  
451 -Feature: Set the trigger interrupt mode.
461 +Payload:    01 00 00 3C    TDC=60S
452 452  
453 -[[image:image-20221021111552-20.png]]
463 +* (% style="color:#037691" %)**Reset**
454 454  
455 -== **2.11 Set the calculate flag** ==
465 +If payload = 0x04FF, it will reset the NMDS200
456 456  
457 -Feature: Set the calculate flag
467 +* (% style="color:#037691" %)**INTMOD**
458 458  
459 -**AT Command: AT+CALCFLAG**
469 +Downlink Payload: 06000003, Set AT+INTMOD=3
460 460  
461 -[[image:image-20221021111711-22.png]]
462 462  
463 -== **2.12 Set count number** ==
472 +== 2.6  ​LED Indicator ==
464 464  
465 -Feature: Manually set the count number
466 466  
467 -**AT Command: AT+SETCNT**
475 +The NMDS200 has an internal LED which is to show the status of different states.
468 468  
469 -[[image:image-20221021111748-24.png]]
477 +* When the device starts normally, the LED will light up for 1 second.
478 +* After NMDS200 join NB-IoT network. The LED will be ON for 3 seconds.
479 +* For each uplink probe, LED will be on for 500ms.
470 470  
471 -== **2.13 Set the number of data to be uploaded and the recording time** ==
481 +== 2.7  Distance alarm function ==
472 472  
473 -➢ AT Command:
474 474  
475 -AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
484 +(% style="color:blue" %)**AT Command: AT+ALARM1=min,max**
476 476  
486 +(% style="color:#037691" %)**Example 1:**
477 477  
478 -AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
488 +AT+ ALARM1 =60,200  ~/~/ Alarm when distance1 lower than 60.
479 479  
480 -== **2.14 Read or Clear cached data** ==
490 +AT+ ALARM2 =min,max
481 481  
482 -➢ AT Command:
483 483  
484 -AT+CDP    ~/~/ Read cached data
493 +(% style="color:#037691" %)**Example 2:**
485 485  
486 -[[image:image-20221021111810-25.png||height="364" width="797"]]
495 +AT+ ALARM2 =200,1500  ~/~/ Alarm when distance2 lower than 1500.
487 487  
488 488  
489 -AT+CDP=0    ~/~/ Clear cached data ​
498 +== 2.8  Set the number of data to be uploaded and the recording time ==
490 490  
491 -== **2.15  ​Firmware Change Log** ==
492 492  
493 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
501 +(% style="color:blue" %)**AT Command:**
494 494  
495 -Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
503 +(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
496 496  
497 -== **2.16  ​Battery Analysis** ==
505 +(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
498 498  
499 -=== **2.16.1  ​Battery Type** ===
500 500  
501 -The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
508 +== 2.9  Read or Clear cached data ==
502 502  
503 -The battery is designed to last for several years depends on the actually use environment and update interval. 
504 504  
505 -The battery related documents as below:
511 +(% style="color:blue" %)**AT Command:**
506 506  
507 -* [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
508 -* [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
509 -* [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
513 +(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
510 510  
511 -[[image:image-20221021111911-26.png]] ​
515 +(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
512 512  
513 -=== **2.16.2  Power consumption Analyze** ===
517 +[[image:1670408172929-569.png]]
514 514  
515 -Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
516 516  
517 -Instruction to use as below:
520 +== 2.10  ​Firmware Change Log ==
518 518  
519 -**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
520 520  
521 -**Step 2: ** Open it and choose
523 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/8elvp2qi9bcv47a/AAAKp0E2nUffztF0tYhqPoE1a?dl=0>>https://www.dropbox.com/sh/8elvp2qi9bcv47a/AAAKp0E2nUffztF0tYhqPoE1a?dl=0]]
522 522  
523 -* Product Model
524 -* Uplink Interval
525 -* Working Mode
525 +Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
526 526  
527 -And the Life expectation in difference case will be shown on the right.
528 528  
529 -[[image:image-20221021111923-27.png||height="253" width="783"]] ​
528 +== 2.11 Battery & Power Consumption ==
530 530  
531 -=== **2.16.3  ​Battery Note** ===
532 532  
533 -The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
531 +NMDS200 uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
534 534  
535 -=== **2.16.4  Replace the battery** ===
533 +[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
536 536  
537 -The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
538 538  
539 -= **3. ​ Access NB-IoT Module** =
536 += 3. ​ Access NB-IoT Module =
540 540  
538 +
541 541  Users can directly access the AT command set of the NB-IoT module.
542 542  
543 543  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
544 544  
545 -[[image:image-20221021112006-28.png]] ​
546 546  
547 -= **4.  Using the AT Commands** =
544 +[[image:image-20221118094449-6.png]] ​
548 548  
549 -== **4.1  Access AT Commands** ==
550 550  
547 += 4.  Using the AT Commands =
548 +
549 +== 4.1  Access AT Commands ==
550 +
551 +
551 551  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
552 552  
553 553  AT+<CMD>?  : Help on <CMD>
... ... @@ -558,8 +558,9 @@
558 558  
559 559  AT+<CMD>=?  : Get the value
560 560  
561 -**General Commands**      
562 562  
563 +(% style="color:blue" %)**General Commands**      
564 +
563 563  AT  : Attention       
564 564  
565 565  AT?  : Short Help     
... ... @@ -574,133 +574,112 @@
574 574  
575 575  AT+INTMOD            : Set the trigger interrupt mode
576 576  
577 -AT+5VT  : Set extend the time of 5V power  
579 +AT+5VT  : Set extend the time of 5V power  
578 578  
579 -AT+PRO  : Choose agreement
581 +AT+PRO  : Choose agreement
580 580  
581 -AT+RXDL  : Extend the sending and receiving time
583 +AT+RXDL  : Extend the sending and receiving time
582 582  
583 -AT+SERVADDR  : Server Address
585 +AT+SERVADDR  : Server Address
584 584  
585 -AT+TR      : Get or Set record time"
587 +AT+TR      :  Get or Set record time
586 586  
589 +AT+NOUD :  Get or Set the number of data to be uploaded
587 587  
588 -AT+NOUD      : Get or Set the number of data to be uploaded
591 +AT+CDP     :  Read or Clear cached data
589 589  
593 +AT+DEBUG:  Enable or Disable debug mode
590 590  
591 -AT+CDP     : Read or Clear cached data
595 +AT+ALARM1:  Get or Set alarm of distance1
592 592  
597 +AT+ALARM2:  Get or Set alarm of distance2
593 593  
594 -AT+ DEBUG   : Enable or Disable debug mode
599 +AT+GETSENSORVALUE :  Returns the current sensor measurement
595 595  
596 -AT+ TTRIG   : Get or Set Alarm Base on Timeout
601 +AT+POWERIC :  Get or set the Power IC flag
597 597  
598 -AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
599 599  
600 -AT+ CALCFLAG   : Get or Set the calculate flag
604 +(% style="color:blue" %)**COAP Management**      
601 601  
602 -AT+ CLRC   : Clear current door open count
606 +AT+URI :  Resource parameters
603 603  
604 -**COAP Management**      
605 605  
606 -AT+URI            : Resource parameters
609 +(% style="color:blue" %)**UDP Management**
607 607  
608 -**UDP Management**
611 +AT+CFM :  Upload confirmation mode (only valid for UDP)
609 609  
610 -AT+CFM          : Upload confirmation mode (only valid for UDP)
611 611  
612 -**MQTT Management**
614 +(% style="color:blue" %)**MQTT Management**
613 613  
614 -AT+CLIENT               : Get or Set MQTT client
616 +AT+CLIENT  : Get or Set MQTT client
615 615  
616 -AT+UNAME  : Get or Set MQTT Username
618 +AT+UNAME : Get or Set MQTT Username
617 617  
618 -AT+PWD                  : Get or Set MQTT password
620 +AT+PWD  :  Get or Set MQTT password
619 619  
620 -AT+PUBTOPIC  : Get or Set MQTT publish topic
622 +AT+PUBTOPIC :  Get or Set MQTT publish topic
621 621  
622 -AT+SUBTOPIC  : Get or Set MQTT subscription topic
624 +AT+SUBTOPIC :  Get or Set MQTT subscription topic
623 623  
624 -**Information**          
625 625  
626 -AT+FDR  : Factory Data Reset
627 +(% style="color:blue" %)**Information**          
627 627  
628 -AT+PWORD  : Serial Access Password
629 +AT+FDR :  Factory Data Reset
629 629  
630 -= **​5.  FAQ** =
631 +AT+PWORD :  Serial Access Password
631 631  
632 -== **5.1 ​ How to Upgrade Firmware** ==
633 633  
634 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
634 += ​5.  FAQ =
635 635  
636 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
636 +== 5.1 ​ How to Upgrade Firmware ==
637 637  
638 -**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
639 639  
640 -== **5.2  Can I calibrate CPN01 to different soil types?** ==
639 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
641 641  
642 -CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
641 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
643 643  
644 -= **6.  Trouble Shooting** =
643 +(% style="color:red" %)**Notice: **(% style="color:blue" %)**NMDS200** (%%)**and (% style="color:blue" %)LMDS200(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
645 645  
646 -== **6.1  ​Connection problem when uploading firmware** ==
647 647  
648 -**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
646 += 6.  Trouble Shooting =
649 649  
650 -== **6.2  AT Command input doesn't work** ==
648 +== 6.1  ​Connection problem when uploading firmware ==
651 651  
652 -In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
653 653  
654 -= **7. ​ Order Info** =
651 +(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
655 655  
656 -Part Number**:** CPN01
657 657  
658 -= **8.  Packing Info** =
654 +== 6.2  AT Command input doesn't work ==
659 659  
660 -**Package Includes**:
661 661  
662 -* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
663 -* External antenna x 1
657 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
664 664  
665 -**Dimension and weight**:
666 666  
667 -* Size: 195 x 125 x 55 mm
668 -* Weight:   420g
660 +== 6.3 Not able to connect to NB-IoT network and keep showing "Signal Strength:99". ==
669 669  
670 -= **9.  Support** =
671 671  
672 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
673 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
663 +This means sensor is trying to join the NB-IoT network but fail. Please see this link for **//[[trouble shooting for signal strenght:99>>doc:Main.CSQ\:99,99.WebHome]]//**.
674 674  
675 -​
676 676  
666 += 7. ​ Order Info =
677 677  
678 678  
669 +Part Number:(% style="color:blue" %)** NMDS200**
679 679  
680 680  
672 += 8.  Packing Info =
681 681  
682 682  
675 +(% style="color:blue" %)**Package Includes**:
683 683  
677 +* NMDS200 NB-IoT Microwave Radar Distance Sensor x 1
684 684  
685 685  
680 += 9.  Support =
686 686  
687 687  
683 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
688 688  
685 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
689 689  
690 -
691 -
692 -
693 -
694 -
695 -
696 -
697 -
698 -
699 -
700 -
701 -
702 -
703 -
704 -
705 -
706 -
687 +​
1666596205057-567.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +179.8 KB
Content
1670404362039-351.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +492.6 KB
Content
1670405841875-916.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.1 KB
Content
1670405928926-116.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.7 KB
Content
1670406036256-101.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +181.0 KB
Content
1670406261143-723.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.9 KB
Content
1670407401682-959.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +23.7 KB
Content
1670408172929-569.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +211.8 KB
Content
1670471530120-960.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +67.6 KB
Content
1670471559211-638.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +170.6 KB
Content
1670471584490-640.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +91.1 KB
Content
1670471613823-833.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +181.0 KB
Content
LMDS200_10.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +39.9 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.5 KB
Content
image-20221207170748-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +26.1 KB
Content
image-20221207170748-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.9 KB
Content
image-20221207173200-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.7 KB
Content
image-20221207173300-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +77.0 KB
Content
image-20221208090742-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +79.7 KB
Content
image-20221209090938-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +121.9 KB
Content
image-20221212171610-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +756.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0