Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 31.1 >
edited by David Huang
on 2022/10/21 11:21
To version < 70.22 >
edited by Xiaoling
on 2022/11/18 11:25
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
1 +NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.David
1 +XWiki.Xiaoling
Content
... ... @@ -1,36 +1,69 @@
1 1  (% style="text-align:center" %)
2 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png" height="578" width="588"]]
2 +[[image:image-20221117105556-1.png]]
3 3  
4 4  
5 -= **1. Introduction** =
6 6  
7 -== **1.1 ​**What is CPN01 **NB-IOT** Pulse/Contact Sensor ==
8 8  
9 -The Dragino CPL01 is a **NB-IOT Contact Sensor**. It detects open/close status and uplink to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
10 10  
11 -The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact open times and calculate last open duration. User can also disable the uplink for each open/close event, instead, device can count each open event and uplink periodically.
12 12  
13 -CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open for a certain time.
14 14  
15 -CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
10 +**Table of Contents：**
16 16  
17 -NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
18 -\\CPN01 supports different uplink methods include **TCP,MQTT,UDP and CoAP  **for different application requirement.
19 -\\CPN01 is powered by  **8500mAh Li-SOCI2 battery**, It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
20 -\\To use CPN01, user needs to check if there is NB-IoT coverage in local area and with the bands CPN01 supports. If the local operate support it, user needs to get a **NB-IoT SIM card** from local operator and install CPN01 to get NB-IoT network connection
12 +{{toc/}}
21 21  
22 -​
23 23  
24 24  
25 -== **​1.2 Features** ==
26 26  
17 +
18 += 1.  Introduction =
19 +
20 +== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
21 +
22 +
23 +(((
24 +The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
25 +)))
26 +
27 +(((
28 +The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
29 +)))
30 +
31 +(((
32 +NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
33 +)))
34 +
35 +(((
36 +NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
37 +)))
38 +
39 +(((
40 +NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
41 +)))
42 +
43 +(((
44 +NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
45 +)))
46 +
47 +(((
48 +NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
49 +)))
50 +
51 +(((
52 +To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
53 +)))
54 +
55 +
56 +
57 +== ​1.2  Features ==
58 +
59 +
27 27  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
28 28  * Open/Close detect
29 29  * Open/Close statistics
30 30  * Monitor Battery Level
31 -* Uplink on periodically and open/close event
64 +* connect two door sensors
32 32  * Datalog feature
33 -* Uplink on periodically
66 +* Uplink periodically
34 34  * Downlink to change configure
35 35  * Wall Mountable
36 36  * Outdoor Use
... ... @@ -37,16 +37,45 @@
37 37  * Ultra-Low Power consumption
38 38  * AT Commands to change parameters
39 39  * Micro SIM card slot for NB-IoT SIM
40 -* 8500mAh Battery for long term use
73 +* 8500mAh Battery for long-term use
41 41  
42 -== **1.3  Specification** ==
43 43  
44 -**Common DC Characteristics:**
45 45  
77 +== 1.3  Storage & Operation ==
78 +
79 +
80 +Temperature -40°C to +85°C
81 +
82 +
83 +== 1.4  Mechanical ==
84 +
85 +
86 +[[image:image-20221117114937-4.png]]
87 +
88 +
89 +[[image:image-20221117114949-5.png]]
90 +
91 +
92 +[[image:image-20221117115010-6.png]]
93 +
94 +
95 +
96 +== 1.5 ​ Applications ==
97 +
98 +
99 +[[image:image-20221117114842-3.png]]
100 +
101 +
102 +
103 +== 1.6  Specification ==
104 +
105 +
106 +(% style="color:blue" %)**Common DC Characteristics:**
107 +
46 46  * Supply Voltage: 2.1v ~~ 3.6v
47 47  * Operating Temperature: -40 ~~ 85°C
48 48  
49 -**NB-IoT Spec:**
111 +(% style="color:blue" %)**NB-IoT Spec:**
50 50  
51 51  * - B1 @H-FDD: 2100MHz
52 52  * - B3 @H-FDD: 1800MHz
... ... @@ -55,261 +55,338 @@
55 55  * - B20 @H-FDD: 800MHz
56 56  * - B28 @H-FDD: 700MHz
57 57  
58 -== **1.4 Installation** ==
59 59  
60 -Connect CPL01 to an Open Close sensor like below. So it can detect the open/close event.
61 61  
62 -[[image:image-20221021110329-1.png]]
122 +== 1.7  Pin Definitions and Switch ==
63 63  
64 -[[image:image-20221021110340-2.png]]
65 65  
66 -== **1.5 ​Applications** ==
125 +[[image:image-20221021110429-4.png]]
67 67  
68 -* Open/Close Detection
69 -* Pulse meter application
70 -* Dry Contact Detection
71 71  
72 -== **1.6 Mechanical** ==
128 +=== 1.7.1  Pin Definition ===
73 73  
74 -​[[image:image-20221021110415-3.png]]
75 75  
76 -== ** 1.7 Pin Definitions and Switch** ==
131 +The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
77 77  
78 -[[image:image-20221021110429-4.png]]
79 79  
80 -=== **1.7.1 Pin Definition** ===
134 +=== 1.7.2  Jumper JP2(Power ON/OFF) ===
81 81  
82 -CPL01 is pre-configured to connect to two external wires. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at: [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>url:https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
83 83  
84 -=== **1.7.2 Jumper JP2(Power ON/OFF)** ===
137 +Power on Device when putting this jumper.
85 85  
86 86  
87 -Power on Device when putting this jumper.
140 +=== 1.7.3  BOOT MODE / SW1 ===
88 88  
89 89  
143 +1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
90 90  
91 -=== **1.7.3 BOOT MODE / SW1** ===
145 +2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
92 92  
93 93  
94 -1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
148 +=== 1.7.4  Reset Button ===
95 95  
96 -2) Flash: work mode, the device starts to work and send out console output for further debug
97 97  
151 +Press to reboot the device.
98 98  
99 99  
100 -=== **1.7.4 Reset Button** ===
154 +=== 1.7.5  LED ===
101 101  
102 102  
103 -Press to reboot the device.
157 +The LED will blink when :
104 104  
105 -== ==
159 +1.  Boot the device in flash mode
106 106  
107 -=== **1.7.5 LED** ===
161 +2.  Send an uplink packet
108 108  
109 109  
110 -It will flash:
164 +== 1.8  Magnet Distance ==
111 111  
112 -1. Boot the device in flash mode
113 -1. Send an uplink packet
114 114  
115 -= **2.  Use CPN01 to communicate with IoT Server** =
167 +(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
116 116  
117 -== **2.1  How it works** ==
169 +(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
118 118  
119 -The CPN01 is equipped with a NB-IoT module, the pre-loaded firmware in CPN01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by CPN01.
120 120  
121 -The diagram below shows the working flow in default firmware of CPN01:
172 += 2.  Use NDS03A to communicate with IoT Server =
122 122  
174 +== 2.1  How it works ==
175 +
176 +
177 +In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
178 +
179 +The diagram below shows the working flow in the default firmware of NDS03A:
180 +
123 123  [[image:image-20221021110615-5.png]]
124 124  
125 -== **2.2 ​ Configure the CPN01** ==
126 126  
127 -=== **2.2.1 Test Requirement** ===
184 +== 2.2 ​ Configure NDS03A ==
128 128  
129 -To use CPN01 in your city, make sure meet below requirements:
186 +=== 2.2.1 Test Requirement ===
130 130  
131 -* Your local operator has already distributed a NB-IoT Network there.
132 -* The local NB-IoT network used the band that CPN01 supports.
188 +
189 +To use NDS03A in your city, make sure to meet below requirements:
190 +
191 +* Your local operator has already distributed an NB-IoT Network.
192 +* The local NB-IoT network used the band that NDS03A supports.
133 133  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
134 134  
135 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The CPN01 will use CoAP(120.24.4.116:5683) or raw UDP(120.24.4.116:5601) or MQTT(120.24.4.116:1883)or TCP(120.24.4.116:5600)protocol to send data to the test server
195 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
136 136  
137 - ​
197 +[[image:image-20221117142300-1.png]]
138 138  
139 -=== **2.2.2 Insert SIM card** ===
140 140  
200 +=== 2.2.2 Insert NB-IoT SIM card ===
201 +
202 +
141 141  Insert the NB-IoT Card get from your provider.
142 142  
143 -User need to take out the NB-IoT module and insert the SIM card like below:
205 +User needs to take out the NB-IoT module and insert the SIM card like below:
144 144  
145 145  [[image:image-20221021110745-6.png]] ​
146 146  
147 -=== **2.2.3 Connect USB – TTL to CPN01 to configure it** ===
148 148  
149 -User need to configure CPN01 via serial port to set the **Server Address** / **Uplink Topic** to define where and how-to uplink packets. CPN01 support AT Commands, user can use a USB to TTL adapter to connect to CPN01 and use AT Commands to configure it, as below.
210 +=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
150 150  
151 -**Connection:**
152 152  
153 - USB TTL GND <~-~-~-~-> GND
213 +User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
154 154  
155 - USB TTL TXD <~-~-~-~-> UART_RXD
215 +(% style="color:blue" %)**Connection:**
156 156  
157 - USB TTL RXD <~-~-~-~-> UART_TXD
217 +(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
158 158  
219 +(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
220 +
221 +(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
222 +
223 +
159 159  In the PC, use below serial tool settings:
160 160  
161 -* Baud:  **9600**
162 -* Data bits:** 8**
163 -* Stop bits: **1**
164 -* Parity:  **None**
165 -* Flow Control: **None**
226 +* Baud:  (% style="color:red" %)**9600**
166 166  
167 -Make sure the switch is in FLASH position, then power on device by connecting the jumper on CPN01. CPN01 will output system info once power on as below, we can enter the **password: 12345678** to access AT Command input.
228 +* Data bits:** (% style="color:red" %)8(%%)**
168 168  
230 +* Stop bits: (% style="color:red" %)**1**
231 +
232 +* Parity:  (% style="color:red" %)**None**
233 +
234 +* Flow Control: (% style="color:red" %)**None**
235 +
236 +Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
237 +
169 169  ​[[image:image-20221021110817-7.png]]
170 170  
171 -**Note: the valid AT Commands can be found at:  **[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
240 +NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
172 172  
173 -=== **2.2.4 Use CoAP protocol to uplink data** ===
174 174  
175 -**Note: if you don't have CoAP server, you can refer this link to set up one: **[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
243 +(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
176 176  
177 -**Use below commands:**
178 178  
179 -* **AT+PRO=1**   ~/~/ Set to use CoAP protocol to uplink
180 -* **AT+SERVADDR=120.24.4.116,5683   ** ~/~/ to set CoAP server address and port
181 -* **AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** ~/~/Set COAP resource path
182 182  
247 +=== 2.2.4 Use CoAP protocol to uplink data ===
248 +
249 +
250 +(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
251 +
252 +
253 +(% style="color:blue" %)**Use below commands in NDS03A:**
254 +
255 +* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
256 +
257 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
258 +
259 +* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
260 +
183 183  For parameter description, please refer to AT command set
184 184  
185 185  [[image:image-20221021110948-8.png]]
186 186  
187 -After configure the server address and **reset the device** (via AT+ATZ ), CPN01 will start to uplink sensor values to CoAP server.
188 188  
189 -[[image:image-20221021110956-9.png]] ​
266 +After configuring the server address and (% style="color:green" %)**reset NDS03A**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
190 190  
191 -=== **2.2.5 Use UDP protocol to uplink data(Default protocol)** ===
268 +[[image:image-20221118103547-9.png||height="605" width="837"]] ​
192 192  
193 -This feature is supported since firmware version v1.0.1
194 194  
195 -* **AT+PRO=2   ** ~/~/ Set to use UDP protocol to uplink
196 -* **AT+SERVADDR=120.24.4.116,5601   ** ~/~/ to set UDP server address and port
197 -* **AT+CFM=1       ** ~/~/If the server does not respond, this command is unnecessary
271 +=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
198 198  
199 -​ ​​​​​​​[[image:image-20221021111025-10.png]]
200 200  
274 +(% style="color:blue" %)**AT Commands:**
275 +
276 +* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
277 +
278 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
279 +
280 +* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
281 +
282 +​ [[image:image-20221021111025-10.png]]
283 +
284 +
201 201  [[image:image-20221021111033-11.png||height="241" width="576"]]
202 202  
203 203  ​
204 204  
205 -=== **2.2.6 Use MQTT protocol to uplink data** ===
289 +=== 2.2.6 Use MQTT protocol to uplink data ===
206 206  
207 -This feature is supported since firmware version v110
208 208  
209 -* **AT+PRO=3   ** ~/~/Set to use MQTT protocol to uplink
210 -* **AT+SERVADDR=120.24.4.116,1883   ** ~/~/Set MQTT server address and port
211 -* **AT+CLIENT=CLIENT       ** ~/~/Set up the CLIENT of MQTT
212 -* **AT+UNAME=UNAME                               **~/~/Set the username of MQTT
213 -* **AT+PWD=PWD                                        **~/~/Set the password of MQTT
214 -* **AT+PUBTOPIC=NSE01_PUB                    **~/~/Set the sending topic of MQTT
215 -* **AT+SUBTOPIC=NSE01_SUB          ** ~/~/Set the subscription topic of MQTT
292 +(% style="color:blue" %)**AT Commands:**
216 216  
217 -​ ​​​​​​​[[image:image-20221021111058-12.png]]
294 +* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
218 218  
219 -[[image:image-20221021111108-13.png]]
296 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
220 220  
298 +* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
299 +
300 +* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
301 +
302 +* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
303 +
304 +* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
305 +
306 +* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
307 +
308 +​ [[image:image-20221118103445-7.png]]
309 +
310 +
311 +[[image:image-20221118103453-8.png||height="608" width="841"]]
312 +
221 221  ​
222 222  
223 -MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
315 +MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
224 224  
225 -=== **2.2.7 Use TCP protocol to uplink data** ===
226 226  
227 -This feature is supported since firmware version v110
318 +=== 2.2.7 Use TCP protocol to uplink data ===
228 228  
229 -* **AT+PRO=4   ** ~/~/ Set to use TCP protocol to uplink
230 -* **AT+SERVADDR=120.24.4.116,5600   ** ~/~/ to set TCP server address and port
231 231  
232 -​ ​​​​​​​[[image:image-20221021111125-14.png]]
321 +(% style="color:blue" %)**AT Commands:**
233 233  
323 +* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
324 +
325 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
326 +
327 +​ [[image:image-20221021111125-14.png]]
328 +
234 234  [[image:image-20221021111131-15.png]]
235 235  
236 236  ​
237 237  
238 -=== **2.2.8 Change Update Interval** ===
333 +=== 2.2.8 Change Update Interval ===
239 239  
240 -User can use below command to change the **uplink interval**.
241 241  
242 -* **AT+TDC=600      ** ~/~/ Set Update Interval to 600s
336 +User can use below command to change the (% style="color:blue" %)**uplink interval**.
243 243  
244 -**NOTE:**
338 +* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
245 245  
246 -**~1. By default, the device will send an uplink message every 1 hour.**
340 +(% style="color:red" %)**NOTE:**
247 247  
248 -== **2.3  Uplink Payload** ==
342 +1.  By default, the device will send an uplink message every 4 hour.
249 249  
250 -In this mode, uplink payload includes 87 bytes in total by default.
251 251  
252 -Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
345 +== 2.3  Uplink Payload ==
253 253  
254 -|**Size(bytes)**|**8**|**2**|**2**|**1**|**1**|**1**|**2**|**2**|4
255 -|**Value**|[[Device ID>>path:#H2.4.1A0A0DeviceID]]|[[Ver>>path:#H2.4.2A0VersionInfo]]|[[BAT>>path:#H2.4.3A0BatteryInfo]]|[[Signal Strength>>path:#H2.4.4A0SignalStrength]]|MOD|[[Interrupt>>path:#H2.4.8A0DigitalInterrupt]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|Time stamp
256 256  
257 -|2|2|4|8 group
258 -|[[Soil Temperature>>path:#H2.4.6A0SoilTemperature]]|[[Soil P>>path:#H2.4.7A0SoilConductivity28EC29]]H|Time stamp|...
348 +The uplink payload includes 26 bytes in total by default.
259 259  
260 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the CPN01 uplink data.
350 +Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
261 261  
262 -[[image:image-20221021111201-16.png||height="572" width="792"]]
352 +(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
263 263  
354 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
355 +|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:50px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:50px" %)**1**|(% style="width:60px" %)**1**|(% style="width:90px" %)**3**|(% style="width:100px" %)**3**
356 +|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
357 +
358 +(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
359 +|(% style="width:50px" %)**4**|(% style="width:90px" %)**1**|(% style="width:90px" %)**3**|(% style="width:90px" %)**3**|(% style="width:60px" %)4|(% style="width:50px" %)(((
360 +**1-32 group**
361 +)))
362 +|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
363 +
364 +
365 +(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
366 +
367 +
368 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
369 +|=(% scope="row" style="width: 50px;" %)**Size(bytes)**|(% style="width:45px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:65px" %)**1**|(% style="width:25px" %)**1**|(% style="width:60px" %)**1**|(% style="width:60px" %)**1**|(% style="width:87px" %)**3**|(% style="width:80px" %)**3**
370 +|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status(pb14)|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb14)|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
371 +
372 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
373 +|(% style="width:80px" %)**1**|(% style="width:80px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:75px" %)**1**|(% style="width:75px" %)**3**
374 +|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>||anchor="H2.7A0AlarmBaseonTimeout"]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
375 +
376 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:510px" %)
377 +|(% style="width:100px" %)**3**|(% style="width:80px" %)**1**|(% style="width:90px" %)**3**|(% style="width:90px" %)**3**|(% style="width:70px" %)**4**|(% style="width:80px" %)(((
378 +**1-32 group**
379 +)))
380 +|(% style="width:102px" %)last open time(pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:100px" %)last open time(pb15)|(% style="width:63px" %)[[Time stamp>>||anchor="H2.4.7A0Timestamp"]]|(% style="width:87px" %)......
381 +
382 +
383 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
384 +
385 +[[image:image-20221117145932-2.png]]
386 +
387 +
264 264  The payload is ASCII string, representative same HEX:
265 265  
266 -0xf86778705021331700640c7817010001000000090000026315537b 0100000b02000002663510fed0100000e0200000263510f39010000000000000063510e85010000000000000063510d2e010000000000000063510c7a010000000000000063510bc6010000000000000063510954010000000000000063510882 where:
390 +**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
267 267  
268 -* **Device ID: 0x f867787050213317 = f867787050213317**
269 -* **Version: 0x0064=100=1.0.0**
392 +**where:**
270 270  
271 -* **BAT: 0x0c78 = 3192 mV = 3.192V**
272 -* **Singal: 0x17 = 23**
273 -* **Mod: 0x01 = 1**
274 -* **Calculate Flag: 0x00= 0**
275 -* **Contact Status: 0x00= 0**
276 -* **Alarm:0x00 =0**
277 -* **Total pulse:0x09 =0**
278 -* **The last open duration:0x02 =2**
279 -* **Time stamp : 0x6315537b =1662342011**
280 -* **Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000b0200002663510fed**
281 -* **8 sets of recorded data: Contact Status, Total pulse, Calculate Flag, The last open duration ,Time stamp : 0100000e0200002663510f39,.......**
394 +* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
282 282  
283 -== **2.4  Payload Explanation and Sensor Interface** ==
396 +* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
284 284  
285 -=== **2.4.1  Device ID** ===
398 +* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
286 286  
287 -By default, the Device ID equal to the last 15 bits of IMEI.
400 +* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
288 288  
289 -User can use **AT+DEUI** to set Device ID
402 +* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
290 290  
404 +* (% style="color:#037691" %)**Door Status:**(%%)  0x00=0
405 +
406 +* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
407 +
408 +* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
409 +
410 +* (% style="color:#037691" %)**last open time:   **(%%)0x000017 =23
411 +
412 +* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
413 +
414 +
415 +== 2.4  Payload Explanation and Sensor Interface ==
416 +
417 +=== 2.4.1  Device ID ===
418 +
419 +
420 +By default, the Device ID is equal to the last 15 bits of IMEI.
421 +
422 +User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
423 +
291 291  **Example:**
292 292  
293 293  AT+DEUI=868411056754138
294 294  
295 -The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
428 +The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
296 296  
297 -=== **2.4.2  Version Info** ===
298 298  
299 -Specify the software version: 0x64=100, means firmware version 1.00.
431 +=== 2.4.2  Version Info ===
300 300  
301 -For example: 0x00 64 : this device is CPN01 with firmware version 1.0.0.
302 302  
303 -=== **2.4.3  Battery Info** ===
434 +Specify the software version: 0x64=100, which means firmware version 1.00.
304 304  
305 -Check the battery voltage for CPN01.
436 +For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
306 306  
438 +
439 +=== 2.4.3  Battery Info ===
440 +
441 +
442 +Check the battery voltage for NDS03A.
443 +
307 307  Ex1: 0x0B45 = 2885mV
308 308  
309 309  Ex2: 0x0B49 = 2889mV
310 310  
311 -=== **2.4.4  Signal Strength** ===
312 312  
449 +=== 2.4.4  Signal Strength ===
450 +
451 +
313 313  NB-IoT Network signal Strength.
314 314  
315 315  **Ex1: 0x1d = 29**
... ... @@ -324,58 +324,46 @@
324 324  
325 325  **99**    Not known or not detectable
326 326  
327 -=== **2.4.5 Calculate Flag** ===
328 328  
329 -The calculate flag is a user define field, IoT server can use this filed to handle different meter with different pulse factor. For example, if there are 100 water meters, meter 1 ~~50 are 1 liter/pulse and meter 51 ~~ 100 has 1.5 liter/pulse.
467 +=== 2.4.5  Disalarm: (default: 0) ===
330 330  
331 -User can set calculate flag to 1 for meter 1~~50 and 2 for meter 51 ~~ 100, So IoT Server can use this field for calculation.
332 332  
333 -Default value: 0. 
470 +(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
334 334  
335 -Range (6 bits): (b)000000 ~~ (b) 111111
472 +(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
336 336  
337 -=== **2.4.6  Alarm** ===
474 + (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
338 338  
339 -See [[Alarm Base on Timeout>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H3.5AlarmBaseonTimeout]]
340 340  
341 -=== **2.4.7 Contact Status** ===
477 +=== 2.4.6  Keep Status & Keep Time ===
342 342  
343 -0: Open
344 344  
345 -1: Close
480 +Shows the configure value of Alarm Base on Timeout Feature
346 346  
347 -=== **2.4.8 Total pulse** ===
348 348  
349 -Total pulse/counting base on dry [[contact trigger event>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.2SensorConfiguration2CFPORT3D4]]
483 +=== 2.4.7  Timestamp ===
350 350  
351 -Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
352 352  
353 -=== **2.4.9 The last open duration** ===
486 +Timestamp : 0x6315537b =1662342011
354 354  
355 -Dry Contact last open duration.
356 356  
357 -Unit: min.
489 +=== 2.4.8  Switch Dual Channel Mode ===
358 358  
359 -[[image:image-20221021111346-17.png||height="146" width="770"]]
360 360  
492 +NDS03A can connect two door sensors. Another door sensor can be connected to PB15 pin. Both channels support alarm function.
361 361  
362 -=== **2.4.10  Timestamp** ===
363 363  
364 -Time stamp : 0x6315537b =1662342011
495 +== 2.5  Downlink Payload ==
365 365  
366 -Convert Unix timestamp to time 2022-9-5 9:40:11.
367 367  
368 -**~ **
498 +By default, NDS03A prints the downlink payload to console port.
369 369  
370 -== **2.5  Downlink Payload** ==
371 -
372 -By default, CPN01 prints the downlink payload to console port.
373 -
374 374  [[image:image-20221021111414-18.png]] ​
375 375  
502 +
376 376  **Examples:**
377 377  
378 -* **Set TDC**
505 +* (% style="color:#037691" %)**Set TDC**
379 379  
380 380  If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
381 381  
... ... @@ -383,171 +383,222 @@
383 383  
384 384  Payload:    01 00 00 3C    TDC=60S
385 385  
386 -* **Reset**
513 +* (% style="color:#037691" %)**Reset**
387 387  
388 -If payload = 0x04FF, it will reset the NSE01
515 +If payload = 0x04FF, it will reset the NDS03A
389 389  
390 -* **INTMOD**
517 +* (% style="color:#037691" %)**INTMOD**
391 391  
392 392  Downlink Payload: 06000003, Set AT+INTMOD=3
393 393  
394 -== **2.6  ​LED Indicator** ==
395 395  
396 -The CPN01 has an internal LED which is to show the status of different state.
522 +== 2.6  ​LED Indicator ==
397 397  
398 -* When power on, CPN01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
399 -* Then the LED will be on for 1 second means device is boot normally.
400 -* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
524 +
525 +The NDS03A has an internal LED which is to show the status of different states.
526 +
527 +* When the device starts normally, the LED will light up for 1 second.
528 +* After NDS03A join NB-IoT network. The LED will be ON for 3 seconds.
401 401  * For each uplink probe, LED will be on for 500ms.
402 402  
403 -== **2.7  Alarm Base on Timeout** ==
404 404  
405 -CPL01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
532 +== 2.7  Alarm Base on Timeout ==
406 406  
407 407  
408 -**~1. Keep Status: Status to be monitor**
535 +NDS03A can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
409 409  
537 +
538 +(% style="color:blue" %)**1. Keep Status: Status to be monitor**
539 +
410 410  Keep Status = 1: Monitor Close to Open event
411 411  
412 412  Keep Status = 0: Monitor Open to Close event
413 413  
414 414  
415 -**2. Keep Time: Timeout to send an Alarm**
545 +(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
416 416  
417 417  Range 0 ~~ 65535(0xFFFF) seconds.
418 418  
419 419  If keep time = 0, Disable Alarm Base on Timeout feature.
420 420  
421 -If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
551 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn't change after timeout.
422 422  
423 423  
424 -**AT Command** to configure:
554 +(% style="color:blue" %)**AT Command to configure:**
425 425  
426 -**AT+TTRIG=1,30**  ~-~-> When the **Keep Status** change from connect to disconnect, and device remains in disconnect status for more than 30 seconds. CPL01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
556 +(% style="color:blue" %)**PB14 PIN:**
427 427  
428 -**AT+TTIG=0,0 ** ~-~-> Default Value, disable timeout Alarm.
558 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. NDS03A will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
429 429  
430 -== **2.8 Set debug mode** ==
560 +(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
431 431  
432 -Feature: Enable or Disable debug mode
433 433  
563 +(% style="color:blue" %)**PB15 PIN:**
434 434  
435 -**AT Command: AT+DEBUG**
565 +(% style="color:#037691" %)**AT+TTRIG2=1,30**
436 436  
567 +(% style="color:#037691" %)**AT+TTRIG2=0,0 **
568 +
569 +
570 +== 2.8  Set debug mode ==
571 +
572 +
573 +Feature: Enable or Disable debug mode
574 +
575 +(% style="color:blue" %)**AT Command: AT+DEBUG**
576 +
437 437  [[image:image-20221021111629-21.png]]
438 438  
439 -== **2.9 Clear Flash Record** ==
440 440  
580 +
581 +== 2.9  Clear Flash Record ==
582 +
583 +
441 441  Feature: Clear flash storage for data log feature.
442 442  
443 -**AT Command: AT+CLRDTA**
586 +(% style="color:blue" %)**AT Command: AT+CLRDTA**
444 444  
445 445  [[image:image-20221021111527-19.png]]
446 446  
447 -== ** 2.10 Set trigger mode** ==
448 448  
449 -➢ AT Command: **AT+TTRMOD**
591 +== 2.10  Count Mod ==
450 450  
451 -Feature: Set the trigger interrupt mode.
452 452  
453 -[[image:image-20221021111552-20.png]]
594 +(% style="color:blue" %)**AT Command: AT+COUNTMOD**
454 454  
455 -== **2.11 Set the calculate flag** ==
596 +[[image:image-20221118092935-1.png]]
456 456  
457 -Feature: Set the calculate flag
458 458  
459 -**AT Command: AT+CALCFLAG**
599 +== 2.11  Interrupt Pin Channel Mod ==
460 460  
461 -[[image:image-20221021111711-22.png]]
462 462  
463 -== **2.12 Set count number** ==
602 +(% style="color:blue" %)**AT Command: AT+TTRCHANNEL**
464 464  
465 -Feature: Manually set the count number
604 +[[image:image-20221118093144-2.png]]
466 466  
467 -**AT Command: AT+SETCNT**
468 468  
469 -[[image:image-20221021111748-24.png]]
607 +== 2.12 TTRIG1/2 timeout status alarm ==
470 470  
471 -== **2.13 Set the number of data to be uploaded and the recording time** ==
472 472  
473 -➢ AT Command:
610 +It needs to be used with AT+TTRIG1 or AT+TTRIG2. When TTRIG1 or TTRIG2 times out and causes an alarm, and the status does not change subsequently, an alarm packet will be sent at the alarm interval.
474 474  
475 -AT+TR=900  ~/~/The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
612 +(% style="color:blue" %)**AT Command: AT+TTRALARM**
476 476  
614 +[[image:image-20221118093512-3.png]]
477 477  
478 -AT+NOUD=8  ~/~/The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
479 479  
480 -== **2.14 Read or Clear cached data** ==
617 +== 2.13  Select counting mode ==
481 481  
482 -➢ AT Command:
483 483  
484 -AT+CDP    ~/~/ Read cached data
620 +(% style="color:blue" %)**AT Command: AT+TTRMODx=a,b**
485 485  
486 -[[image:image-20221021111810-25.png||height="364" width="797"]]
622 +When (% style="color:red" %)**a=0**(%%), the door is opened to count, and when (% style="color:red" %)**a=1**(%%),the closed door is counted.
487 487  
624 +When (% style="color:red" %)**b=0**(%%), it is the last door open duration, and when (% style="color:red" %)**b=1**(%%),the last door close duration.
488 488  
489 -AT+CDP=0    ~/~/ Clear cached data ​
626 +[[image:image-20221118093658-4.png]]
490 490  
491 -== **2.15  ​Firmware Change Log** ==
492 492  
493 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
629 +== 2.14  Set the number of data to be uploaded and the recording time ==
494 494  
495 -Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
496 496  
497 -== **2.16  ​Battery Analysis** ==
632 +(% style="color:blue" %)**AT Command:**
498 498  
499 -=== **2.16.1  ​Battery Type** ===
634 +(% style="color:#037691" %)**AT+TR=900**(%%)  ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
500 500  
501 -The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
636 +(% style="color:#037691" %)**AT+NOUD=8**(%%)** ** ~/~/  The device uploads 0 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
502 502  
503 -The battery is designed to last for several years depends on the actually use environment and update interval. 
504 504  
505 -The battery related documents as below:
639 +== 2.15  Read or Clear cached data ==
506 506  
641 +
642 +(% style="color:blue" %)**AT Command:**
643 +
644 +(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
645 +
646 +(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
647 +
648 +[[image:image-20221118094227-5.png]]
649 +
650 +
651 +== 2.16  ​Firmware Change Log ==
652 +
653 +
654 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0>>https://www.dropbox.com/sh/hacq385w6qgnonr/AAC3D79GFGF1JdZUIzNegn2Ha?dl=0]]
655 +
656 +Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
657 +
658 +
659 +== 2.17  ​Battery Analysis ==
660 +
661 +=== 2.17.1  ​Battery Type ===
662 +
663 +
664 +The NDS03A battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
665 +
666 +The battery is designed to last for several years depends on the actual use environment and update interval. 
667 +
668 +The battery-related documents as below:
669 +
507 507  * [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
671 +
508 508  * [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
673 +
509 509  * [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
510 510  
511 511  [[image:image-20221021111911-26.png]] ​
512 512  
513 -=== **2.16.2  Power consumption Analyze** ===
514 514  
679 +=== 2.17.2  Power consumption Analyze ===
680 +
681 +
515 515  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
516 516  
517 517  Instruction to use as below:
518 518  
519 -**Step 1:  **Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
686 +(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
520 520  
521 -**Step 2: ** Open it and choose
688 +(% style="color:blue" %)**Step 2: **(%%) Open it and choose
522 522  
523 523  * Product Model
691 +
524 524  * Uplink Interval
693 +
525 525  * Working Mode
526 526  
527 527  And the Life expectation in difference case will be shown on the right.
528 528  
529 -[[image:image-20221021111923-27.png||height="253" width="783"]] ​
698 +[[image:1666596205057-567.png]] ​
530 530  
531 -=== **2.16.3  ​Battery Note** ===
532 532  
701 +=== 2.17.3  ​Battery Note ===
702 +
703 +
533 533  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
534 534  
535 -=== **2.16.4  Replace the battery** ===
536 536  
537 -The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
707 +=== 2.17.4  Replace the battery ===
538 538  
539 -= **3. ​ Access NB-IoT Module** =
540 540  
710 +The default battery pack of NDS03A includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
711 +
712 +
713 += 3. ​ Access NB-IoT Module =
714 +
715 +
541 541  Users can directly access the AT command set of the NB-IoT module.
542 542  
543 543  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
544 544  
545 -[[image:image-20221021112006-28.png]] ​
546 546  
547 -= **4.  Using the AT Commands** =
721 +[[image:image-20221118094449-6.png]] ​
548 548  
549 -== **4.1  Access AT Commands** ==
550 550  
724 += 4.  Using the AT Commands =
725 +
726 +== 4.1  Access AT Commands ==
727 +
728 +
551 551  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
552 552  
553 553  AT+<CMD>?  : Help on <CMD>
... ... @@ -558,8 +558,9 @@
558 558  
559 559  AT+<CMD>=?  : Get the value
560 560  
561 -**General Commands**      
562 562  
740 +(% style="color:blue" %)**General Commands**      
741 +
563 563  AT  : Attention       
564 564  
565 565  AT?  : Short Help     
... ... @@ -582,35 +582,41 @@
582 582  
583 583  AT+SERVADDR  : Server Address
584 584  
585 -AT+TR      : Get or Set record time"
764 +AT+TR      :  Get or Set record time
586 586  
587 -
588 588  AT+NOUD      : Get or Set the number of data to be uploaded
589 589  
768 +AT+CDP     :  Read or Clear cached data
590 590  
591 -AT+CDP     : Read or Clear cached data
770 +AT+ DEBUG   : Enable or Disable debug mode
592 592  
772 +AT+ TTRIG1   : Get or Set PB14 PIN Alarm Base on Timeout
593 593  
594 -AT+ DEBUG   : Enable or Disable debug mode
774 +AT+ TTRIG2   : Get or Set PB15 PIN Alarm Base on Timeout
595 595  
596 -AT+ TTRIG   : Get or Set Alarm Base on Timeout
776 +AT+COUNTMOD  :  Get or Set the count mode
597 597  
598 -AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
778 +AT+TTRCHANNEL  : Get or Set the number of interrupt channels
599 599  
600 -AT+ CALCFLAG   : Get or Set the calculate flag
780 +AT+TTRALARM : Get or Set TTRIG1 of Alarm interval (unit: minute)
601 601  
602 -AT+ CLRC   : Clear current door open count
782 +AT+DISALARM  : Enable/Disable Alarm for door open/close or water leak event
603 603  
604 -**COAP Management**      
784 +AT+ CLRC   :  Clear current door open count
605 605  
786 +
787 +(% style="color:blue" %)**COAP Management**      
788 +
606 606  AT+URI            : Resource parameters
607 607  
608 -**UDP Management**
609 609  
792 +(% style="color:blue" %)**UDP Management**
793 +
610 610  AT+CFM          : Upload confirmation mode (only valid for UDP)
611 611  
612 -**MQTT Management**
613 613  
797 +(% style="color:blue" %)**MQTT Management**
798 +
614 614  AT+CLIENT               : Get or Set MQTT client
615 615  
616 616  AT+UNAME  : Get or Set MQTT Username
... ... @@ -621,86 +621,60 @@
621 621  
622 622  AT+SUBTOPIC  : Get or Set MQTT subscription topic
623 623  
624 -**Information**          
625 625  
810 +(% style="color:blue" %)**Information**          
811 +
626 626  AT+FDR  : Factory Data Reset
627 627  
628 628  AT+PWORD  : Serial Access Password
629 629  
630 -= **​5.  FAQ** =
631 631  
632 -== **5.1 ​ How to Upgrade Firmware** ==
817 += ​5.  FAQ =
633 633  
819 +== 5.1 ​ How to Upgrade Firmware ==
820 +
821 +
634 634  User can upgrade the firmware for 1) bug fix, 2) new feature release.
635 635  
636 636  Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
637 637  
638 -**Notice, **CPN01 **and **CPN01 **share the same mother board. They use the same connection and method to update.**
826 +(% style="color:red" %)**Notice: **(% style="color:blue" %)**NDS03A** (%%)**and (% style="color:blue" %)LDS03A(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
639 639  
640 -== **5.2  Can I calibrate CPN01 to different soil types?** ==
641 641  
642 -CPN01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>url:https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
829 += 6.  Trouble Shooting =
643 643  
644 -= **6.  Trouble Shooting** =
831 +== 6.1  ​Connection problem when uploading firmware ==
645 645  
646 -== **6.1  ​Connection problem when uploading firmware** ==
647 647  
648 -**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
834 +(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
649 649  
650 -== **6.2  AT Command input doesn't work** ==
651 651  
652 -In the case if user can see the console output but can't type input to the device. Please check if you already include the **ENTER** while sending out the command. Some serial tool doesn't send **ENTER** while press the send key, user need to add ENTER in their string.
837 +== 6.2  AT Command input doesn't work ==
653 653  
654 -= **7. ​ Order Info** =
655 655  
656 -Part Number**:** CPN01
840 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
657 657  
658 -= **8.  Packing Info** =
659 659  
660 -**Package Includes**:
843 += 7. ​ Order Info =
661 661  
662 -* CPN01 NB-IoT Soil Moisture & EC Sensor x 1
663 -* External antenna x 1
664 664  
665 -**Dimension and weight**:
846 +Part Number**:** NDS03A
666 666  
667 -* Size: 195 x 125 x 55 mm
668 -* Weight:   420g
669 669  
670 -= **9.  Support** =
849 += 8.  Packing Info =
671 671  
672 -* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
673 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
674 674  
675 -​
852 +(% style="color:blue" %)**Package Includes**:
676 676  
854 +* NDS03A Open/Close Door Sensor x 1
677 677  
678 678  
679 679  
858 += 9.  Support =
680 680  
681 681  
861 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
682 682  
863 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
683 683  
684 -
685 -
686 -
687 -
688 -
689 -
690 -
691 -
692 -
693 -
694 -
695 -
696 -
697 -
698 -
699 -
700 -
701 -
702 -
703 -
704 -
705 -
706 -
865 +​
1666596205057-567.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +179.8 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +8.7 KB
Content
image-20221118092935-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +13.1 KB
Content
image-20221118093144-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +11.7 KB
Content
image-20221118093512-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.5 KB
Content
image-20221118093658-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20221118094227-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
image-20221118094449-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.5 KB
Content
image-20221118103445-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +20.4 KB
Content
image-20221118103453-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.2 KB
Content
image-20221118103547-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0