Last modified by Mengting Qiu on 2024/04/02 17:03
<
From version < 1.5 >
edited by Xiaoling
on 2022/10/19 16:31
To version < 61.5 >
edited by Xiaoling
on 2022/11/17 16:45
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -CPN01- NB-IoT Outdoor Open/Close Dry Contact Sensor User Manual
1 +NDS03A - Outdoor NB-IoT Open/Close Door Sensor User Manual
Content
... ... @@ -1,5 +1,5 @@
1 1  (% style="text-align:center" %)
2 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/WebHome/1652856952171-363.png?rev=1.1||alt="1652856952171-363.png"]]
2 +[[image:image-20221117105556-1.png]]
3 3  
4 4  
5 5  
... ... @@ -7,28 +7,901 @@
7 7  
8 8  
9 9  
10 +**Table of Contents：**
10 10  
11 11  
12 12  
13 13  
14 14  
16 += 1.  Introduction =
15 15  
18 +== 1.1 ​ What is NDS03A NB-IoT Open/Close Door Sensor ==
16 16  
17 17  
21 +(((
22 +The Dragino NDS03A is an (% style="color:blue" %)**Open/Close NB-IoT Door Sensor**(%%). It detects door (% style="color:blue" %)**open/close status**(%%) and (% style="color:blue" %)**uplinks**(%%) to IoT server via NB-IoT network. NDS03A can connect two door sensors. user can see the door status, open duration, open counts in the IoT Server.
23 +)))
18 18  
25 +(((
26 +The NDS03A will send periodically data (% style="color:blue" %)**every 4 hours** (%%)as well as for each door open/close action. It also counts the door open times and calculates the last door open duration. Users can also disable the uplink for each open/close event, instead, NDS03A can count each open event and uplink periodically.
27 +)))
19 19  
29 +(((
30 +NDS03A has a (% style="color:blue" %)**Datalog feature**(%%), it will record the open/close event and the user can retrieve the history from NB-IoT.
31 +)))
20 20  
33 +(((
34 +NDS03A has the(% style="color:blue" %)**open alarm feature**(%%), user can set this feature so the device will send an alarm if the door has been open for a certain time.
35 +)))
21 21  
37 +(((
38 +NDS03A is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high temperatures.
39 +)))
22 22  
41 +(((
42 +NarrowBand-Internet of Things (NB-IoT) is a (% style="color:blue" %)**standards-based low power wide area (LPWA) technologyTCP, MQTT, UDP, and CoAP**(%%) for different application requirements.
43 +)))
23 23  
45 +(((
46 +NDS03A is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long-term use of up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
47 +)))
24 24  
49 +(((
50 +To use NDS03A, user needs to check if there is NB-IoT coverage in the field and with the Nb-IoT bands that NDS03A supports. If local operator support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from the operator and install into NDS03A to get NB-IoT network connection.
51 +)))
25 25  
26 26  
27 27  
55 +== ​1.2  Features ==
28 28  
29 29  
58 +* NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
59 +* Open/Close detect
60 +* Open/Close statistics
61 +* Monitor Battery Level
62 +* connect two door sensors
63 +* Datalog feature
64 +* Uplink periodically
65 +* Downlink to change configure
66 +* Wall Mountable
67 +* Outdoor Use
68 +* Ultra-Low Power consumption
69 +* AT Commands to change parameters
70 +* Micro SIM card slot for NB-IoT SIM
71 +* 8500mAh Battery for long-term use
30 30  
73 +== 1.3  Storage & Operation ==
31 31  
32 32  
76 +Temperature -40°C to +85°C
33 33  
34 -
78 +
79 +== 1.4  Mechanical ==
80 +
81 +
82 +[[image:image-20221117114937-4.png]]
83 +
84 +
85 +[[image:image-20221117114949-5.png]]
86 +
87 +
88 +[[image:image-20221117115010-6.png]]
89 +
90 +
91 +
92 +== 1.5 ​ Applications ==
93 +
94 +
95 +[[image:image-20221117114842-3.png]]
96 +
97 +
98 +
99 +== 1.6  Specification ==
100 +
101 +
102 +(% style="color:blue" %)**Common DC Characteristics:**
103 +
104 +* Supply Voltage: 2.1v ~~ 3.6v
105 +* Operating Temperature: -40 ~~ 85°C
106 +
107 +(% style="color:blue" %)**NB-IoT Spec:**
108 +
109 +* - B1 @H-FDD: 2100MHz
110 +* - B3 @H-FDD: 1800MHz
111 +* - B8 @H-FDD: 900MHz
112 +* - B5 @H-FDD: 850MHz
113 +* - B20 @H-FDD: 800MHz
114 +* - B28 @H-FDD: 700MHz
115 +
116 +== 1.7  Pin Definitions and Switch ==
117 +
118 +
119 +[[image:image-20221021110429-4.png]]
120 +
121 +
122 +=== 1.7.1  Pin Definition ===
123 +
124 +
125 +The device is pre-configured to connect to a door sensor. The other pins are not used. If user wants to know more about other pins, please refer to the user manual of LSN50v2 at:  [[https:~~/~~/www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0>>https://www.dropbox.com/sh/djkxs7mr17y94mi/AABVlWbM9uzK9OA3mXyAT10Za?dl=0]]
126 +
127 +
128 +
129 +=== 1.7.2  Jumper JP2(Power ON/OFF) ===
130 +
131 +
132 +Power on Device when putting this jumper.
133 +
134 +
135 +
136 +=== 1.7.3  BOOT MODE / SW1 ===
137 +
138 +
139 +1)  ISP:  upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. The firmware won't run.
140 +
141 +2)  Flash:  working mode, the device starts to work for NB-IoT connection and sends out console output for further debugging.
142 +
143 +
144 +
145 +=== 1.7.4  Reset Button ===
146 +
147 +
148 +Press to reboot the device.
149 +
150 +
151 +
152 +=== 1.7.5  LED ===
153 +
154 +
155 +The LED will blink when :
156 +
157 +1.  Boot the device in flash mode
158 +
159 +2.  Send an uplink packet
160 +
161 +
162 +
163 +== 1.8  Magnet Distance ==
164 +
165 +
166 +(% style="color:blue" %)**Wood Door:**(%%) 10 ~~ 30mm
167 +
168 +(% style="color:blue" %)**Iron Door:**(%%)**    **30 ~~ 45mm
169 +
170 +
171 +
172 += 2.  Use CPN01 to communicate with IoT Server =
173 +
174 +== 2.1  How it works ==
175 +
176 +
177 +In this user case, the NDS03A is installed on the door edge to detect the open/close event and send the status to the NB-IoT server. The NB-IoT network will forward this value to IoT server via the protocol defined by NDS03A.
178 +
179 +The diagram below shows the working flow in the default firmware of NDS03A:
180 +
181 +[[image:image-20221021110615-5.png]]
182 +
183 +
184 +
185 +== 2.2 ​ Configure NDS03A ==
186 +
187 +=== 2.2.1 Test Requirement ===
188 +
189 +
190 +To use NDS03A in your city, make sure to meet below requirements:
191 +
192 +* Your local operator has already distributed an NB-IoT Network.
193 +* The local NB-IoT network used the band that NDS03A supports.
194 +* Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
195 +
196 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDS03A will use** (% style="color:red" %)CoAP(120.24.4.116:5683)(%%)** or raw (% style="color:red" %)**UDP(120.24.4.116:5601) **(%%)or (% style="color:red" %)**MQTT(120.24.4.116:1883) **(%%)or (% style="color:red" %)**TCP(120.24.4.116:5600)protocol**(%%) to send data to the test server.
197 +
198 +[[image:image-20221117142300-1.png]]
199 +
200 + ​
201 +
202 +
203 +=== 2.2.2 Insert NB-IoT SIM card ===
204 +
205 +
206 +Insert the NB-IoT Card get from your provider.
207 +
208 +User needs to take out the NB-IoT module and insert the SIM card like below:
209 +
210 +[[image:image-20221021110745-6.png]] ​
211 +
212 +
213 +
214 +=== 2.2.3 Connect USB – TTL to NDS03A and configure it ===
215 +
216 +
217 +User need to configure NDS03A via serial port to set the (% style="color:red" %)**Server Address** / **Uplink Topic**(%%) to define where and how-to uplink packets. NDS03A support AT Commands, user can use a USB to TTL adapter to connect to NDS03A and use AT Commands to configure it, as below.
218 +
219 +(% style="color:blue" %)**Connection:**
220 +
221 +(% style="background-color:yellow" %)** USB TTL GND <~-~-~-~-> GND**
222 +
223 +(% style="background-color:yellow" %)** USB TTL TXD <~-~-~-~-> UART_RXD**
224 +
225 +(% style="background-color:yellow" %)** USB TTL RXD <~-~-~-~-> UART_TXD**
226 +
227 +
228 +In the PC, use below serial tool settings:
229 +
230 +* Baud:  (% style="color:red" %)**9600**
231 +
232 +* Data bits:** (% style="color:red" %)8(%%)**
233 +
234 +* Stop bits: (% style="color:red" %)**1**
235 +
236 +* Parity:  (% style="color:red" %)**None**
237 +
238 +* Flow Control: (% style="color:red" %)**None**
239 +
240 +Make sure the switch is in FLASH position, then power on NDS03A by connecting the (% style="color:orange" %)**Yellow Jumper**(%%).
241 +
242 +​[[image:image-20221021110817-7.png]]
243 +
244 +NDS03A will output system info once powered on as below, we can enter the **password: 12345678** to access AT Command input.
245 +
246 +
247 +(% style="color:red" %)**Note: the valid AT Commands can be found at:  **(%%)[[**https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0**>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
248 +
249 +
250 +
251 +=== 2.2.4 Use CoAP protocol to uplink data ===
252 +
253 +
254 +(% style="color:red" %)**Note: if you don't have a CoAP server, you can refer this link to set up a CoAP server: **(%%)[[**http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
255 +
256 +
257 +(% style="color:blue" %)**Use below commands in CPN01:**
258 +
259 +* (% style="color:#037691" %)**AT+PRO=1**                (%%) ~/~/ Set to use CoAP protocol to uplink
260 +
261 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%) ~/~/ Set CoAP server address and port
262 +
263 +* (% style="color:#037691" %)**AT+URI=0,0,11,2,"mqtt" ** (%%) ~/~/  Set CoAP resource path
264 +
265 +For parameter description, please refer to AT command set
266 +
267 +[[image:image-20221021110948-8.png]]
268 +
269 +
270 +After configuring the server address and (% style="color:green" %)**reset CPN01**(%%) (via AT+ATZ ), NDS03A will start to uplink sensor values to the CoAP server.
271 +
272 +[[image:image-20221021110956-9.png]] ​
273 +
274 +
275 +
276 +=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
277 +
278 +
279 +(% style="color:blue" %)**AT Commands:**
280 +
281 +* (% style="color:#037691" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
282 +
283 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  Set UDP server address and port
284 +
285 +* (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
286 +
287 +​ [[image:image-20221021111025-10.png]]
288 +
289 +
290 +[[image:image-20221021111033-11.png||height="241" width="576"]]
291 +
292 +​
293 +
294 +
295 +=== 2.2.6 Use MQTT protocol to uplink data ===
296 +
297 +
298 +(% style="color:blue" %)**AT Commands:**
299 +
300 +* (% style="color:#037691" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
301 +
302 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
303 +
304 +* (% style="color:#037691" %)**AT+CLIENT=CLIENT       ** (%%) ~/~/  Set up the CLIENT of MQTT
305 +
306 +* (% style="color:#037691" %)**AT+UNAME=UNAME                     **(%%)** **~/~/  Set the username of MQTT
307 +
308 +* (% style="color:#037691" %)**AT+PWD=PWD                         **(%%)** **~/~/  Set the password of MQTT
309 +
310 +* (% style="color:#037691" %)**AT+PUBTOPIC=NSE01_PUB              **(%%)** **~/~/  Set the sending topic of MQTT
311 +
312 +* (% style="color:#037691" %)**AT+SUBTOPIC=NSE01_SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
313 +
314 +​ [[image:image-20221021111058-12.png]]
315 +
316 +
317 +[[image:image-20221021111201-16.png||height="472" width="653"]]
318 +
319 +​
320 +
321 +MQTT protocol has a much higher power consumption compare with UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
322 +
323 +
324 +
325 +=== 2.2.7 Use TCP protocol to uplink data ===
326 +
327 +
328 +(% style="color:blue" %)**AT Commands:**
329 +
330 +* (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
331 +
332 +* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  Set TCP server address and port
333 +
334 +​ [[image:image-20221021111125-14.png]]
335 +
336 +[[image:image-20221021111131-15.png]]
337 +
338 +​
339 +
340 +
341 +=== 2.2.8 Change Update Interval ===
342 +
343 +
344 +User can use below command to change the (% style="color:blue" %)**uplink interval**.
345 +
346 +* (% style="color:#037691" %)**AT+TDC=14400      ** (%%) ~/~/ Set Update Interval to 14400s (4 hours)
347 +
348 +(% style="color:red" %)**NOTE:**
349 +
350 +1.  By default, the device will send an uplink message every 4 hour.
351 +
352 +
353 +
354 +== 2.3  Uplink Payload ==
355 +
356 +
357 +The uplink payload includes 26 bytes in total by default.
358 +
359 +Each time the device uploads a data package. The user can use the AT+NOUD command to upload the recorded data.Up to 32 sets of recorded data can be uploaded.
360 +
361 +(% style="color:blue" %)**When AT+TTRCHANNEL=1:**
362 +
363 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:693px" %)
364 +|=(% scope="row" style="width: 93px;" %)**Size(bytes)**|(% style="width:67px" %)**8**|(% style="width:40px" %)**2**|(% style="width:45px" %)**2**|(% style="width:75px" %)**1**|(% style="width:54px" %)**1**|(% style="width:62px" %)**1**|(% style="width:60px" %)**1**|(% style="width:94px" %)**3**|(% style="width:93px" %)**3**
365 +|=(% style="width: 93px;" %)**Value**|(% style="width:67px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:45px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:75px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:62px" %)Door Status|(% style="width:60px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:94px" %)door open num(pb14) |(% style="width:93px" %)last open time(pb14)
366 +
367 +(% border="1.5" style="background-color:#ffffcc; color:green; width:490px" %)
368 +|(% style="width:50px" %)**4**|(% style="width:70px" %)**1**|(% style="width:50px" %)**3**|(% style="width:99px" %)**3**|(% style="width:67px" %)4|(% style="width:50px" %)(((
369 +**1-32 group**
370 +)))
371 +|(% style="width:98px" %)[[Time stamp>>||anchor="H2.4.10A0Timestamp"]]|(% style="width:115px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)|(% style="width:99px" %)last open time(pb14)|(% style="width:67px" %)Time stamp|(% style="width:74px" %)...
372 +
373 +(% style="color:blue" %)**When AT+TTRCHANNEL=2:**
374 +
375 +
376 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
377 +|=(% scope="row" style="width: 96px;" %)**Size(bytes)**|(% style="width:66px" %)**8**|(% style="width:40px" %)**2**|(% style="width:46px" %)**2**|(% style="width:70px" %)**1**|(% style="width:54px" %)**1**|(% style="width:55px" %)**1**|(% style="width:57px" %)**1**|(% style="width:86px" %)**3**|(% style="width:82px" %)**3**
378 +|=(% style="width: 96px;" %)**Value**|(% style="width:66px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:40px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:70px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:54px" %)MOD|(% style="width:55px" %)Door Status|(% style="width:57px" %)[[Alarm Status>>||anchor="H2.4.6A0Alarm"]]|(% style="width:86px" %)door open num(pb14) |(% style="width:82px" %)last open time(pb14)
379 +
380 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:520px" %)
381 +|(% style="width:59px" %)**1**|(% style="width:67px" %)**1**|(% style="width:88px" %)**3**|(% style="width:81px" %)**3**|(% style="width:50px" %)**4**|(% style="width:66px" %)**1**|(% style="width:92px" %)**3**
382 +|(% style="width:59px" %)Door Status(pb15)|(% style="width:67px" %)[[Alarm Status>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPN01-%20NB-IoT%20Outdoor%20OpenClose%20Dry%20Contact%20Sensor%C2%A0User%20Manual/#H2.4.7A0ContactStatus]](pb15)|(% style="width:88px" %)door open num(pb15)|(% style="width:81px" %)last open time(pb15)|(% style="width:50px" %)Time stamp|(% style="width:66px" %)Door Status(pb14)|(% style="width:92px" %)door open num(pb14)
383 +
384 +(% border="1" cellspacing="5" style="background-color:#ffffcc; color:green; width:500px" %)
385 +|(% style="width:102px" %)**3**|(% style="width:93px" %)**1**|(% style="width:91px" %)**3**|(% style="width:88px" %)**3**|(% style="width:63px" %)**4**|(% style="width:87px" %)(((
386 +**1-32 group**
387 +)))
388 +|(% style="width:102px" %)last open time (pb14)|(% style="width:93px" %)Door Status(pb15)|(% style="width:91px" %)door open num(pb15)|(% style="width:88px" %)last open time(pb15)|(% style="width:63px" %)Time stamp|(% style="width:87px" %)...
389 +
390 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDS03A uplink data.
391 +
392 +[[image:image-20221117145932-2.png]]
393 +
394 +
395 +The payload is ASCII string, representative same HEX:
396 +
397 +**0x (% style="color:red" %)__f867787050213317__  (% style="color:blue" %)__0064__ (% style="color:green" %) __0ccf__(% style="color:#00b0f0" %) __19__(% style="color:#7030a0" %) __01__(% style="color:#0020b0" %) __00__ (% style="color:#420042" %)__00__(% style="color:#660066" %) (% style="color:#aaaa40" %)__000016__(% style="color:#663300" %) __000017__ (% style="color:#d60093" %)__637590df__(%%)**
398 +
399 +**where:**
400 +
401 +* (% style="color:#037691" %)**Device ID:**(%%) 0x f867787050213317 = f867787050213317
402 +
403 +* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
404 +
405 +* (% style="color:#037691" %)**BAT :**(%%)  0x0ccf = 3279 mV = 3.279V
406 +
407 +* (% style="color:#037691" %)**Singal: **(%%)0x19 = 25
408 +
409 +* (% style="color:#037691" %)**Mod:**(%%) 0x01 = 1
410 +
411 +* (% style="color:#037691" %)**Door Status:**(%%) 0x00=0
412 +
413 +* (% style="color:#037691" %)**Alarm Status: **(%%)0x00 =0
414 +
415 +* (% style="color:#037691" %)**door open num: **(%%)0x000016 =22
416 +
417 +* (% style="color:#037691" %)**last open time: **(%%)0x000017 =23
418 +
419 +* (% style="color:#037691" %)**Timestamp:**(%%) 0x637590df =1668649183 (Unix Time)
420 +
421 +== 2.4  Payload Explanation and Sensor Interface ==
422 +
423 +
424 +=== 2.4.1  Device ID ===
425 +
426 +
427 +By default, the Device ID is equal to the last 15 bits of IMEI.
428 +
429 +User can use (% style="color:blue" %)**AT+DEUI** (%%)to set Device ID
430 +
431 +**Example:**
432 +
433 +AT+DEUI=868411056754138
434 +
435 +The Device ID is stored in a non-erase area, Upgrade the firmware or run AT+FDR won't erase the Device ID.
436 +
437 +
438 +
439 +=== 2.4.2  Version Info ===
440 +
441 +
442 +Specify the software version: 0x64=100, which means firmware version 1.00.
443 +
444 +For example 0x00 64 : This device is NDS03A 1 with firmware version 1.0.0.
445 +
446 +
447 +
448 +=== 2.4.3  Battery Info ===
449 +
450 +
451 +Check the battery voltage for NDS03A.
452 +
453 +Ex1: 0x0B45 = 2885mV
454 +
455 +Ex2: 0x0B49 = 2889mV
456 +
457 +
458 +
459 +=== 2.4.4  Signal Strength ===
460 +
461 +
462 +NB-IoT Network signal Strength.
463 +
464 +**Ex1: 0x1d = 29**
465 +
466 +**0**  -113dBm or less
467 +
468 +**1**  -111dBm
469 +
470 +**2...30** -109dBm... -53dBm
471 +
472 +**31**   -51dBm or greater
473 +
474 +**99**    Not known or not detectable
475 +
476 +
477 +
478 +=== 2.4.5  Disalarm: (default: 0) ===
479 +
480 +
481 +(% style="color:blue" %)**If Disalarm = 1**(%%), NDS03A will only send uplink at every TDC periodically. This is normally use for pulse meter application, in this application, there are many open/close event, and platform only care about the total number of pulse.
482 +
483 +(% style="color:blue" %)**If Disalarm = 0**(%%), NDS03A will send uplink at every TDC periodically and send data on each open/close event. This is useful for the application user need to monitor the open/close event in real-time.
484 +
485 + (% style="color:red" %)**Note:**(%%) When Disalarm=0, a high frequently open/close event will cause lots of uplink and drain battery very fast.
486 +
487 +
488 +
489 +=== 2.4.6  Alarm ===
490 +
491 +
492 +See [[Alarm Base on Timeout>>||anchor="H2.7A0AlarmBaseonTimeout"]]
493 +
494 +
495 +
496 +=== 2.4.7  Contact Status ===
497 +
498 +
499 +0: Open
500 +
501 +1: Close
502 +
503 +
504 +
505 +=== 2.4.8  Total pulse ===
506 +
507 +
508 +Total pulse/counting based on dry [[contact trigger event>>||anchor="H2.12Setcountnumber"]]
509 +
510 +Range (3 Bytes) : 0x000000 ~~ 0xFFFFFF . Max: 16777215
511 +
512 +
513 +
514 +=== 2.4.9  The last open duration ===
515 +
516 +
517 +Dry Contact last open duration.
518 +
519 +Unit: min.
520 +
521 +[[image:image-20221021111346-17.png||height="146" width="770"]]
522 +
523 +
524 +
525 +=== 2.4.10  Timestamp ===
526 +
527 +
528 +Timestamp : 0x6315537b =1662342011
529 +
530 +Convert Unix timestamp to time 2022-9-5 9:40:11.
531 +
532 +**~ **
533 +
534 +
535 +== 2.5  Downlink Payload ==
536 +
537 +
538 +By default, CPN01 prints the downlink payload to console port.
539 +
540 +[[image:image-20221021111414-18.png]] ​
541 +
542 +
543 +**Examples:**
544 +
545 +* (% style="color:#037691" %)**Set TDC**
546 +
547 +If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
548 +
549 +Payload:    01 00 00 1E    TDC=30S
550 +
551 +Payload:    01 00 00 3C    TDC=60S
552 +
553 +* (% style="color:#037691" %)**Reset**
554 +
555 +If payload = 0x04FF, it will reset the NSE01
556 +
557 +* (% style="color:#037691" %)**INTMOD**
558 +
559 +Downlink Payload: 06000003, Set AT+INTMOD=3
560 +
561 +
562 +
563 +== 2.6  ​LED Indicator ==
564 +
565 +
566 +The CPN01 has an internal LED which is to show the status of different states.
567 +
568 +* When the device starts normally, the LED will light up for 1 second.
569 +* After CPN01 join NB-IoT network. The LED will be ON for 3 seconds.
570 +* For each uplink probe, LED will be on for 500ms.
571 +
572 +== 2.7  Alarm Base on Timeout ==
573 +
574 +
575 +CPN01 can monitor the timeout for a status change, this feature can be used to monitor some events such as door opening too long etc. Related Parameters are:
576 +
577 +
578 +(% style="color:blue" %)**1. Keep Status: Status to be monitor**
579 +
580 +Keep Status = 1: Monitor Close to Open event
581 +
582 +Keep Status = 0: Monitor Open to Close event
583 +
584 +
585 +(% style="color:blue" %)**2. Keep Time: Timeout to send an Alarm**
586 +
587 +Range 0 ~~ 65535(0xFFFF) seconds.
588 +
589 +If keep time = 0, Disable Alarm Base on Timeout feature.
590 +
591 +If keep time > 0, device will monitor the keep status event and send an alarm when status doesn’t change after timeout.
592 +
593 +
594 +(% style="color:blue" %)**AT Command to configure:**
595 +
596 +(% style="color:#037691" %)**AT+TTRIG=1,30** (%%) **~-~->**  When the **Keep Status** change from connected to disconnect, and device remains in disconnect status for more than 30 seconds. CPN01 will send an uplink packet, the [[Alarm bit>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/CPL01%20LoRaWAN%20Outdoor%20PulseContact%20%20Sensor%20Manual/#H2.3.3Real-TimeOpen2FCloseStatus2CUplinkFPORT3D2]] (the second bit of 1^^st^^ byte of payload) on this uplink packet is set to 1.
597 +
598 +(% style="color:#037691" %)**AT+TTRIG=0,0 ** (%%) **~-~->** Default Value, disable timeout Alarm.
599 +
600 +
601 +
602 +== 2.8  Set debug mode ==
603 +
604 +
605 +Feature: Enable or Disable debug mode
606 +
607 +(% style="color:blue" %)**AT Command: AT+DEBUG**
608 +
609 +[[image:image-20221021111629-21.png]]
610 +
611 +
612 +
613 +== 2.9  Clear Flash Record ==
614 +
615 +
616 +Feature: Clear flash storage for data log feature.
617 +
618 +(% style="color:blue" %)**AT Command: AT+CLRDTA**
619 +
620 +[[image:image-20221021111527-19.png]]
621 +
622 +
623 +
624 +== 2.10  Set trigger mode ==
625 +
626 +
627 +(% style="color:blue" %)**AT Command: AT+TTRMOD**
628 +
629 +Feature: Set the trigger interrupt mode.
630 +
631 +[[image:image-20221021111552-20.png]]
632 +
633 +
634 +
635 +== 2.11  Set the calculate flag ==
636 +
637 +
638 +Feature: Set the calculate flag
639 +
640 +(% style="color:blue" %)**AT Command: AT+CALCFLAG**
641 +
642 +[[image:image-20221021111711-22.png]]
643 +
644 +
645 +
646 +== 2.12 Set count number ==
647 +
648 +
649 +Feature: Manually set the count number
650 +
651 +(% style="color:blue" %)**AT Command: AT+SETCNT**
652 +
653 +[[image:image-20221021111748-24.png]]
654 +
655 +
656 +
657 +== 2.13  Set the number of data to be uploaded and the recording time ==
658 +
659 +
660 +(% style="color:blue" %)**AT Command:**
661 +
662 +(% style="color:#037691" %)**AT+TR=900**        (%%)~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
663 +
664 +(% style="color:#037691" %)**AT+NOUD=8 ** (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
665 +
666 +
667 +
668 +== 2.14  Read or Clear cached data ==
669 +
670 +
671 +(% style="color:blue" %)**AT Command:**
672 +
673 +(% style="color:#037691" %)**AT+CDP**  (%%) ~/~/ Read cached data
674 +
675 +(% style="color:#037691" %)**AT+CDP=0**  (%%) ~/~/ Clear cached data ​
676 +
677 +[[image:image-20221021111810-25.png||height="364" width="797"]]
678 +
679 +
680 +
681 +== 2.15  ​Firmware Change Log ==
682 +
683 +
684 +Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0>>https://www.dropbox.com/sh/8p5nuvo6gh7je4n/AAAMP7MMusgbXMz9Ik7Ls03Ga?dl=0]]
685 +
686 +Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
687 +
688 +
689 +
690 +== 2.16  ​Battery Analysis ==
691 +
692 +
693 +=== 2.16.1  ​Battery Type ===
694 +
695 +
696 +The CPN01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
697 +
698 +The battery is designed to last for several years depends on the actual use environment and update interval. 
699 +
700 +The battery-related documents as below:
701 +
702 +* [[Battery Dimension>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
703 +
704 +* [[Lithium-Thionyl Chloride Battery datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
705 +
706 +* [[Lithium-ion Battery-Capacitor datasheet>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
707 +
708 +[[image:image-20221021111911-26.png]] ​
709 +
710 +
711 +
712 +=== 2.16.2  Power consumption Analyze ===
713 +
714 +
715 +Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
716 +
717 +Instruction to use as below:
718 +
719 +(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
720 +
721 +(% style="color:blue" %)**Step 2: **(%%) Open it and choose
722 +
723 +* Product Model
724 +
725 +* Uplink Interval
726 +
727 +* Working Mode
728 +
729 +And the Life expectation in difference case will be shown on the right.
730 +
731 +[[image:1666596205057-567.png]] ​
732 +
733 +
734 +
735 +=== 2.16.3  ​Battery Note ===
736 +
737 +
738 +The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
739 +
740 +
741 +
742 +=== 2.16.4  Replace the battery ===
743 +
744 +
745 +The default battery pack of CPN01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
746 +
747 +
748 +
749 += 3. ​ Access NB-IoT Module =
750 +
751 +
752 +Users can directly access the AT command set of the NB-IoT module.
753 +
754 +The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
755 +
756 +[[image:image-20221021112006-28.png]] ​
757 +
758 +
759 +
760 += 4.  Using the AT Commands =
761 +
762 +
763 +== 4.1  Access AT Commands ==
764 +
765 +
766 +See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
767 +
768 +AT+<CMD>?  : Help on <CMD>
769 +
770 +AT+<CMD>         : Run <CMD>
771 +
772 +AT+<CMD>=<value> : Set the value
773 +
774 +AT+<CMD>=?  : Get the value
775 +
776 +
777 +(% style="color:blue" %)**General Commands**      
778 +
779 +AT  : Attention       
780 +
781 +AT?  : Short Help     
782 +
783 +ATZ  : MCU Reset    
784 +
785 +AT+TDC  : Application Data Transmission Interval
786 +
787 +AT+CFG  : Print all configurations
788 +
789 +AT+CFGMOD           : Working mode selection
790 +
791 +AT+INTMOD            : Set the trigger interrupt mode
792 +
793 +AT+5VT  : Set extend the time of 5V power  
794 +
795 +AT+PRO  : Choose agreement
796 +
797 +AT+RXDL  : Extend the sending and receiving time
798 +
799 +AT+SERVADDR  : Server Address
800 +
801 +AT+TR      :  Get or Set record time
802 +
803 +AT+NOUD      : Get or Set the number of data to be uploaded
804 +
805 +AT+CDP     :  Read or Clear cached data
806 +
807 +AT+ DEBUG   : Enable or Disable debug mode
808 +
809 +AT+ TTRIG   : Get or Set Alarm Base on Timeout
810 +
811 +AT+ TTRMOD   : Get or Set the trigger interrupt mode(0:falling,1:rising)
812 +
813 +AT+ CALCFLAG   : Get or Set the calculate flag
814 +
815 +AT+ CLRC   : Clear current door open count
816 +
817 +
818 +(% style="color:blue" %)**COAP Management**      
819 +
820 +AT+URI            : Resource parameters
821 +
822 +
823 +(% style="color:blue" %)**UDP Management**
824 +
825 +AT+CFM          : Upload confirmation mode (only valid for UDP)
826 +
827 +
828 +(% style="color:blue" %)**MQTT Management**
829 +
830 +AT+CLIENT               : Get or Set MQTT client
831 +
832 +AT+UNAME  : Get or Set MQTT Username
833 +
834 +AT+PWD                  : Get or Set MQTT password
835 +
836 +AT+PUBTOPIC  : Get or Set MQTT publish topic
837 +
838 +AT+SUBTOPIC  : Get or Set MQTT subscription topic
839 +
840 +
841 +(% style="color:blue" %)**Information**          
842 +
843 +AT+FDR  : Factory Data Reset
844 +
845 +AT+PWORD  : Serial Access Password
846 +
847 +
848 +
849 += ​5.  FAQ =
850 +
851 +
852 +== 5.1 ​ How to Upgrade Firmware ==
853 +
854 +
855 +User can upgrade the firmware for 1) bug fix, 2) new feature release.
856 +
857 +Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
858 +
859 +(% style="color:red" %)**Notice: **(% style="color:blue" %)**CPN01** (%%)**and (% style="color:blue" %)CPL01(%%)**(% style="color:blue" %) (%%)**share the same mother board. They use the same connection and method to update.**
860 +
861 +
862 +
863 += 6.  Trouble Shooting =
864 +
865 +
866 +== 6.1  ​Connection problem when uploading firmware ==
867 +
868 +
869 +(% style="color:blue" %)**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
870 +
871 +
872 +
873 +== 6.2  AT Command input doesn't work ==
874 +
875 +
876 +In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER** (%%)while press the send key, user need to add ENTER in their string.
877 +
878 +
879 +
880 += 7. ​ Order Info =
881 +
882 +
883 +Part Number**:** CPN01
884 +
885 +
886 +
887 += 8.  Packing Info =
888 +
889 +
890 +(% style="color:blue" %)**Package Includes**:
891 +
892 +* CPN01 Open/Close Sensor x 1
893 +* External antenna x 1
894 +
895 +(% style="color:blue" %)**Dimension and weight**:
896 +
897 +* Size: 195 x 125 x 55 mm
898 +* Weight:   420g
899 +
900 += 9.  Support =
901 +
902 +
903 +* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
904 +
905 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
906 +
907 +​
1666596205057-567.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +179.8 KB
Content
image-20221021110329-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +127.0 KB
Content
image-20221021110340-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +37.2 KB
Content
image-20221021110415-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +48.6 KB
Content
image-20221021110429-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +176.7 KB
Content
image-20221021110615-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +112.8 KB
Content
image-20221021110745-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +419.3 KB
Content
image-20221021110817-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +296.3 KB
Content
image-20221021110948-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +66.8 KB
Content
image-20221021110956-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +59.8 KB
Content
image-20221021111025-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +21.6 KB
Content
image-20221021111033-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +45.3 KB
Content
image-20221021111058-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +70.7 KB
Content
image-20221021111108-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +58.1 KB
Content
image-20221021111125-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +60.1 KB
Content
image-20221021111131-15.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +55.5 KB
Content
image-20221021111201-16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +63.8 KB
Content
image-20221021111346-17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.6 KB
Content
image-20221021111414-18.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +32.1 KB
Content
image-20221021111527-19.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +7.3 KB
Content
image-20221021111552-20.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +10.6 KB
Content
image-20221021111629-21.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.6 KB
Content
image-20221021111711-22.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20221021111730-23.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +6.6 KB
Content
image-20221021111748-24.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +10.1 KB
Content
image-20221021111810-25.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +75.7 KB
Content
image-20221021111911-26.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +179.7 KB
Content
image-20221021111923-27.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +130.6 KB
Content
image-20221021112006-28.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +76.5 KB
Content
image-20221022234529-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +43.3 KB
Content
image-20221022234602-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +135.7 KB
Content
image-20221023000439-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +82.1 KB
Content
image-20221117105556-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +133.3 KB
Content
image-20221117114459-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.9 KB
Content
image-20221117114842-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +964.1 KB
Content
image-20221117114937-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +79.1 KB
Content
image-20221117114949-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +33.4 KB
Content
image-20221117115010-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +40.4 KB
Content
image-20221117142300-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +147.8 KB
Content
image-20221117145932-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +51.9 KB
Content
image-20221117150312-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +8.7 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0