Last modified by Mengting Qiu on 2024/04/02 16:54
<
From version < 38.6 >
edited by Xiaoling
on 2022/10/25 16:22
To version < 33.4 >
edited by Xiaoling
on 2022/09/13 09:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -13,20 +13,14 @@
13 13  == 1.1 ​ What is NLMS01 Leaf Moisture Sensor ==
14 14  
15 15  
16 -(((
17 17  The Dragino NLMS01 is a (% style="color:blue" %)**NB-IOT Leaf Moisture Sensor**(%%) for IoT of Agriculture. It is designed to measure the leaf moisture and temperature, so to send to the platform to analyze the leaf status such as : watering, moisturizing, dew, frozen. The probe is IP67 waterproof.
18 -)))
19 19  
20 -(((
21 21  NLMS01 detects leaf's(% style="color:blue" %)** moisture and temperature use FDR method**(%%), it senses the dielectric constant cause by liquid over the leaf surface, and cover the value to leaf moisture. The probe is design in a leaf shape to best simulate the real leaf characterizes. The probe has as density as 15 leaf vein lines per centimeter which make it can senses small drop and more accuracy.
22 -)))
23 23  
24 -(((
25 25  NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
26 26  \\NLMS01 supports different uplink methods include (% style="color:blue" %)**TCP,MQTT,UDP and CoAP  **(%%)for different application requirement.
27 27  \\NLMS01 is powered by  (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method).
28 28  \\To use NLMS01, user needs to check if there is NB-IoT coverage in local area and with the bands NLMS01 supports. If the local operate support it, user needs to get a (% style="color:blue" %)**NB-IoT SIM card**(%%) from local operator and install NLMS01 to get NB-IoT network connection.
29 -)))
30 30  
31 31  
32 32  ​[[image:image-20220907171221-2.png]]
... ... @@ -56,6 +56,7 @@
56 56  (((
57 57  
58 58  
53 +
59 59  
60 60  )))
61 61  
... ... @@ -76,6 +76,9 @@
76 76  * - B20 @H-FDD: 800MHz
77 77  * - B28 @H-FDD: 700MHz
78 78  
74 +
75 +
76 +
79 79  == 1.4  Probe Specification ==
80 80  
81 81  
... ... @@ -87,6 +87,8 @@
87 87  * IP67 Protection
88 88  * Length: 3.5 meters
89 89  
88 +
89 +
90 90  (% style="color:#037691" %)**Leaf Temperature:**
91 91  
92 92  * Range -50℃～80℃
... ... @@ -95,11 +95,17 @@
95 95  * IP67 Protection
96 96  * Length: 3.5 meters
97 97  
98 +
99 +
100 +
98 98  == 1.5 ​ Applications ==
99 99  
100 100  
101 101  * Smart Agriculture
102 102  
106 +
107 +
108 +
103 103  == 1.6  Pin mapping and power on ==
104 104  
105 105  
... ... @@ -218,6 +218,8 @@
218 218  * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5601     ** (%%) ~/~/  to set UDP server address and port
219 219  * (% style="color:#037691" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
220 220  
227 +
228 +
221 221  ​ [[image:image-20220907171221-11.png]]
222 222  
223 223  
... ... @@ -239,6 +239,8 @@
239 239  * (% style="color:#037691" %)**AT+PUBTOPIC=PUB                    ** (%%) ~/~/  Set the sending topic of MQTT
240 240  * (% style="color:#037691" %)**AT+SUBTOPIC=SUB          ** (%%) ~/~/  Set the subscription topic of MQTT
241 241  
250 +
251 +
242 242  ​ [[image:image-20220907171221-13.png]]
243 243  
244 244  
... ... @@ -259,6 +259,8 @@
259 259  * (% style="color:#037691" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
260 260  * (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600   ** (%%) ~/~/  to set TCP server address and port
261 261  
272 +
273 +
262 262  ​ [[image:image-20220907171221-15.png]]
263 263  
264 264  
... ... @@ -275,6 +275,8 @@
275 275  
276 276  * (% style="color:#037691" %)**AT+TDC=7200      ** (%%) ~/~/ Set Update Interval to 7200s (2 hour)
277 277  
290 +
291 +
278 278  (% style="color:red" %)**NOTE: By default, the device will send an uplink message every 2 hour. Each Uplink Include 8 set of records in this 2 hour (15 minute interval / record).**
279 279  
280 280  
... ... @@ -287,8 +287,8 @@
287 287  Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
288 288  
289 289  
290 -(% border="1" style="background-color:#ffffcc; color:green; width:520px" %)
291 -|(% style="width:45px" %)**Size(bytes)**|(% style="width:45px" %)**8**|(% style="width:20px" %)**2**|(% style="width:20px" %)**2**|(% style="width:60px" %)1|(% style="width:20px" %)1|(% style="width:40px" %)1|(% style="width:40px" %)2|(% style="width:50px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:40px" %)2|(% style="width:40px" %)4
304 +(% border="1" style="background-color:#ffffcc; color:green; width:1251px" %)
305 +|(% style="width:96px" %)**Size(bytes)**|(% style="width:82px" %)**8**|(% style="width:42px" %)**2**|(% style="width:48px" %)**2**|(% style="width:124px" %)1|(% style="width:58px" %)1|(% style="width:82px" %)1|(% style="width:113px" %)2|(% style="width:134px" %)2|(% style="width:100px" %)4|(% style="width:137px" %)2|(% style="width:110px" %)2|(% style="width:122px" %)4
292 292  |(% style="width:96px" %)**Value**|(% style="width:82px" %)Device ID|(% style="width:42px" %)Ver|(% style="width:48px" %)BAT|(% style="width:124px" %)Signal Strength|(% style="width:58px" %)MOD|(% style="width:82px" %)Interrupt|(% style="width:113px" %)Leaf moisture|(% style="width:134px" %)Leaf Temperature|(% style="width:100px" %)Time stamp|(% style="width:137px" %)Leaf Temperature|(% style="width:110px" %)Leaf moisture|(% style="width:122px" %)Time stamp  .....
293 293  
294 294  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NLMS01 uplink data.
... ... @@ -299,32 +299,23 @@
299 299  
300 300  The payload is ASCII string, representative same HEX:
301 301  
302 -**0x (% style="color:red" %)__f868411056754138__  (% style="color:blue" %)__0064 __ (% style="color:green" %)__0c78__  (% style="color:#00b0f0" %)__17__  (% style="color:#7030a0" %)__01__  (% style="color:#d60093" %)__00__  (% style="color:#a14d07" %)__0225 __ (% style="color:#0020b0" %) __010b__  (% style="color:#420042" %)__6315537b__  (% style="color:#663300" %)//__010b0226631550fb__  __010e022663154d77  01110225631549f1  011502246315466b  01190223631542e5  011d022163153f62  011e022163153bde 011e022163153859__//(%%)**
316 +0x(% style="color:red" %)f868411056754138(% style="color:blue" %)0064(% style="color:green" %)0c78(% style="color:red" %)17(% style="color:blue" %)01(% style="color:green" %)00(% style="color:blue" %)**0225010b6315537b**010b0226631550fb**010e022663154d77**01110225631549f1**011502246315466b**01190223631542e5**011d022163153f62**011e022163153bde**011e022163153859**(%%)** **where:
303 303  
304 -where:
318 +* (% style="color:red" %)Device ID: 0xf868411056754138 = f868411056754138
319 +* (% style="color:blue" %)Version: 0x0064=100=1.0.0
320 +* (% style="color:green" %)BAT: 0x0c78 = 3192 mV = 3.192V
321 +* (% style="color:red" %)Singal: 0x17 = 23
322 +* (% style="color:blue" %)Mod: 0x01 = 1
323 +* (% style="color:green" %)Interrupt: 0x00= 0
324 +* Leaf moisture: 0x0225= 549 = 54.9%
325 +* Leaf Temperature:0x010B =267=26.7 °C
326 +* Time stamp : 0x6315537b =1662342011 ([[Unix Epoch Time>>https://www.epochconverter.com/]])
327 +* Leaf Temperature, Leaf moisture,Time stamp : 010b0226631550fb
328 +* (% style="color:blue" %)8 sets of recorded data: Leaf Temperature, Leaf moisture,Time stamp : 010e022663154d77,.......
305 305  
306 -* (% style="color:#037691" %)**Device ID:**(%%) 0xf868411056754138 = f868411056754138
307 307  
308 -* (% style="color:#037691" %)**Version:**(%%) 0x0064=100=1.0.0
309 309  
310 -* (% style="color:#037691" %)**BAT:**       (%%)0x0c78 = 3192 mV = 3.192V
311 311  
312 -* (% style="color:#037691" %)**Singal:**(%%)  0x17 = 23
313 -
314 -* (% style="color:#037691" %)**Mod:**(%%)  0x01 = 1
315 -
316 -* (% style="color:#037691" %)**Interrupt:**(%%) 0x00= 0
317 -
318 -* (% style="color:#037691" %)**Leaf moisture:**(%%) 0x0225= 549 = 54.9%
319 -
320 -* (% style="color:#037691" %)**Leaf Temperature: **(%%)0x010B =267=26.7 °C
321 -
322 -* (% style="color:#037691" %)**Time stamp :**   (%%)0x6315537b =1662342011 ([[Unix Epoch Time>>https://www.epochconverter.com/]])
323 -
324 -* (% style="color:#037691" %)**Leaf Temperature, Leaf moisture,Time stamp :  **(%%)010b0226631550fb
325 -
326 -* (% style="color:#037691" %)**8 sets of recorded data: **(%%)Leaf Temperature, Leaf moisture,Time stamp : 010e022663154d77,.......
327 -
328 328  == 2.4  Payload Explanation and Sensor Interface ==
329 329  
330 330  
... ... @@ -492,6 +492,9 @@
492 492  * After NLMS01 join NB-IoT network. The LED will be ON for 3 seconds.
493 493  * For each uplink probe, LED will be on for 500ms.
494 494  
500 +
501 +
502 +
495 495  == 2.7  Installation ==
496 496  
497 497  
... ... @@ -543,9 +543,7 @@
543 543  * (% style="color:#037691" %)**AT+TR=900**   (%%) ~/~/  The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
544 544  * (% style="color:#037691" %)**AT+NOUD=8**  (%%)~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
545 545  
546 - The diagram below explains the relationship between TR, NOUD, and TDC more clearly**:**
547 547  
548 -[[image:image-20221009001002-1.png||height="706" width="982"]]
549 549  
550 550  
551 551  == 2.10  Read or Clear cached data ==
... ... @@ -556,6 +556,8 @@
556 556  * (% style="color:#037691" %)**AT+CDP**      (%%) ~/~/  Read cached data
557 557  * (% style="color:#037691" %)**AT+CDP=0  ** (%%) ~/~/  Clear cached data
558 558  
565 +
566 +
559 559  [[image:image-20220907171221-20.png]]
560 560  
561 561  
... ... @@ -563,9 +563,9 @@
563 563  == 2.11  ​Firmware Change Log ==
564 564  
565 565  
566 -Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/qdc3js2iu1vlipx/AACMHI3CvVb8g7YQMrIHY673a?dl=0>>https://www.dropbox.com/sh/qdc3js2iu1vlipx/AACMHI3CvVb8g7YQMrIHY673a?dl=0]]
574 +Download URL & Firmware Change log: [[https:~~/~~/www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0>>url:https://www.dropbox.com/sh/1zmcakvbkf24f8x/AACmq2dZ3iRB9F1nVWeEB9Moa?dl=0]]
567 567  
568 -Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
576 +Upgrade Instruction: [[Upgrade Firmware>>path:#H5.1200BHowtoUpgradeFirmware]]
569 569  
570 570  
571 571  
... ... @@ -643,86 +643,86 @@
643 643  
644 644  See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0>>url:https://www.dropbox.com/sh/351dwor6joz8nwh/AADn1BQaAAxLF_QMyU8NkW47a?dl=0]]
645 645  
646 -AT+<CMD>?  :  Help on <CMD>
654 +AT+<CMD>?  : Help on <CMD>
647 647  
648 -AT+<CMD>  :  Run <CMD>
656 +AT+<CMD>         : Run <CMD>
649 649  
650 -AT+<CMD>=<value>:  Set the value
658 +AT+<CMD>=<value> : Set the value
651 651  
652 -AT+<CMD>=?  :  Get the value
660 +AT+<CMD>=?  : Get the value
653 653  
654 654  
655 655  (% style="color:#037691" %)**General Commands**      
656 656  
657 -AT  :  Attention       
665 +AT  : Attention       
658 658  
659 -AT?  :  Short Help     
667 +AT?  : Short Help     
660 660  
661 -ATZ  :  MCU Reset    
669 +ATZ  : MCU Reset    
662 662  
663 -AT+TDC  :  Application Data Transmission Interval
671 +AT+TDC  : Application Data Transmission Interval
664 664  
665 -AT+CFG  :  Print all configurations
673 +AT+CFG  : Print all configurations
666 666  
667 -AT+CFGMOD  :  Working mode selection
675 +AT+CFGMOD           : Working mode selection
668 668  
669 -AT+INTMOD  :  Set the trigger interrupt mode
677 +AT+INTMOD            : Set the trigger interrupt mode
670 670  
671 -AT+5VT  :  Set extend the time of 5V power  
679 +AT+5VT  : Set extend the time of 5V power  
672 672  
673 -AT+PRO :  Choose agreement
681 +AT+PRO  : Choose agreement
674 674  
675 -AT+RXDL:  Extend the sending and receiving time
683 +AT+RXDL  : Extend the sending and receiving time
676 676  
677 -AT+SERVADDR :  Server Address
685 +AT+SERVADDR  : Server Address
678 678  
679 -AT+APN :  Get or set the APN
687 +AT+APN     : Get or set the APN
680 680  
681 -AT+FBAND :  Get or Set whether to automatically modify the frequency band
689 +AT+FBAND   : Get or Set whether to automatically modify the frequency band
682 682  
683 -AT+DNSCFG : Get or Set DNS Server
691 +AT+DNSCFG  : Get or Set DNS Server
684 684  
685 685  AT+GETSENSORVALUE   : Returns the current sensor measurement
686 686  
687 -AT+TR :  Get or Set record time"
695 +AT+TR      : Get or Set record time"
688 688  
689 -AT+NOUD :  Get or Set the number of data to be uploaded
697 +AT+NOUD      : Get or Set the number of data to be uploaded
690 690  
691 -AT+CDP :  Read or Clear cached data
699 +AT+CDP     : Read or Clear cached data
692 692  
693 -AT+TEMPALARM :  Get or Set alarm of temp
701 +AT+TEMPALARM      : Get or Set alarm of temp
694 694  
695 -AT+HUMALARM :  Get or Set alarm of humidity
703 +AT+HUMALARM     : Get or Set alarm of PH
696 696  
697 697  
698 698  (% style="color:#037691" %)**COAP Management**      
699 699  
700 -AT+URI :  Resource parameters
708 +AT+URI            : Resource parameters
701 701  
702 702  
703 703  (% style="color:#037691" %)**UDP Management**
704 704  
705 -AT+CFM :  Upload confirmation mode (only valid for UDP)
713 +AT+CFM          : Upload confirmation mode (only valid for UDP)
706 706  
707 707  
708 708  (% style="color:#037691" %)**MQTT Management**
709 709  
710 -AT+CLIENT  :  Get or Set MQTT client
718 +AT+CLIENT               : Get or Set MQTT client
711 711  
712 -AT+UNAME  : Get or Set MQTT Username
720 +AT+UNAME  : Get or Set MQTT Username
713 713  
714 -AT+PWD  :  Get or Set MQTT password
722 +AT+PWD                  : Get or Set MQTT password
715 715  
716 -AT+PUBTOPIC  :  Get or Set MQTT publish topic
724 +AT+PUBTOPIC  : Get or Set MQTT publish topic
717 717  
718 -AT+SUBTOPIC :  Get or Set MQTT subscription topic
726 +AT+SUBTOPIC  : Get or Set MQTT subscription topic
719 719  
720 720  
721 721  (% style="color:#037691" %)**Information**          
722 722  
723 -AT+FDR :  Factory Data Reset
731 +AT+FDR  : Factory Data Reset
724 724  
725 -AT+PWORD :  Serial Access Password
733 +AT+PWORD  : Serial Access Password
726 726  
727 727  
728 728  
... ... @@ -779,6 +779,8 @@
779 779  * Package Size / pcs : cm
780 780  * Weight / pcs : g
781 781  
790 +
791 +
782 782  = 9.  Support =
783 783  
784 784  
image-20221009001002-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -282.9 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0