Last modified by Bei Jinggeng on 2024/05/31 09:53
<
From version < 97.15 >
edited by Xiaoling
on 2022/07/09 11:51
To version < 108.3 >
edited by Xiaoling
on 2022/10/15 10:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,6 +16,7 @@
16 16  
17 17  = 1.  Introduction =
18 18  
19 +
19 19  == 1.1 ​ What is NDDS75 Distance Detection Sensor ==
20 20  
21 21  (((
... ... @@ -27,27 +27,22 @@
27 27  )))
28 28  
29 29  (((
30 -
31 31  The NDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to IoT Server via NB-IoT Network.
32 32  )))
33 33  
34 34  (((
35 -
36 36  NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
37 37  )))
38 38  
39 39  (((
40 -
41 41  NDDS75 supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP** (%%)for different application requirement.
42 42  )))
43 43  
44 44  (((
45 -
46 46  NDDS75 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
47 47  )))
48 48  
49 49  (((
50 -
51 51  To use NDDS75, user needs to check if there is NB-IoT coverage in local area and with the bands NDDS75 supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install NDDS75 to get NB-IoT network connection.
52 52  )))
53 53  )))
... ... @@ -76,6 +76,7 @@
76 76  * 8500mAh Battery for long term use
77 77  
78 78  
75 +
79 79  == 1.3  Specification ==
80 80  
81 81  
... ... @@ -107,8 +107,10 @@
107 107  * Max transmit power: 350mA@3.3v
108 108  
109 109  
107 +
110 110  == ​1.4  Applications ==
111 111  
110 +
112 112  * Smart Buildings & Home Automation
113 113  * Logistics and Supply Chain Management
114 114  * Smart Metering
... ... @@ -120,6 +120,7 @@
120 120  ​
121 121  
122 122  
122 +
123 123  == 1.5  Pin Definitions ==
124 124  
125 125  
... ... @@ -129,8 +129,10 @@
129 129  
130 130  = 2.  Use NDDS75 to communicate with IoT Server =
131 131  
132 +
132 132  == 2.1  How it works ==
133 133  
135 +
134 134  (((
135 135  The NDDS75 is equipped with a NB-IoT module, the pre-loaded firmware in NDDS75 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by NDDS75.
136 136  )))
... ... @@ -156,16 +156,17 @@
156 156  
157 157  === 2.2.1 Test Requirement ===
158 158  
161 +
159 159  (((
160 160  To use NDDS75 in your city, make sure meet below requirements:
161 161  )))
162 162  
163 163  * Your local operator has already distributed a NB-IoT Network there.
164 -* The local NB-IoT network used the band that NSE01 supports.
167 +* The local NB-IoT network used the band that NDDS75 supports.
165 165  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
166 166  
167 167  (((
168 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDDS75 will use CoAP((% style="color:red" %)120.24.4.116:5683)(%%) or raw UDP((% style="color:red" %)120.24.4.116:5601)(%%) or MQTT((% style="color:red" %)120.24.4.116:1883)(%%)or TCP((% style="color:red" %)120.24.4.116:5600)(%%)protocol to send data to the test server
171 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDDS75 will use CoAP((% style="color:red" %)120.24.4.116:5683)(%%) or raw UDP((% style="color:red" %)120.24.4.116:5601)(%%) or MQTT((% style="color:red" %)120.24.4.116:1883)(%%)or TCP((% style="color:red" %)120.24.4.116:5600)(%%)protocol to send data to the test server.
169 169  )))
170 170  
171 171  
... ... @@ -175,6 +175,7 @@
175 175  
176 176  === 2.2.2 Insert SIM card ===
177 177  
181 +
178 178  (((
179 179  Insert the NB-IoT Card get from your provider.
180 180  )))
... ... @@ -190,6 +190,7 @@
190 190  
191 191  === 2.2.3 Connect USB – TTL to NDDS75 to configure it ===
192 192  
197 +
193 193  (((
194 194  (((
195 195  User need to configure NDDS75 via serial port to set the (% style="color:blue" %)**Server Address** / **Uplink Topic** (%%)to define where and how-to uplink packets. NDDS75 support AT Commands, user can use a USB to TTL adapter to connect to NDDS75 and use AT Commands to configure it, as below.
... ... @@ -198,15 +198,16 @@
198 198  
199 199  [[image:image-20220709092052-2.png]]
200 200  
201 -**Connection:**
202 202  
203 - (% style="background-color:yellow" %)USB TTL GND <~-~-~-~-> GND
207 +(% style="color:blue" %)**Connection:**
204 204  
205 - (% style="background-color:yellow" %)USB TTL TXD <~-~-~-~-> UART_RXD
209 + (% style="background-color:yellow" %)**USB TTL GND <~-~-~-~-> GND**
206 206  
207 - (% style="background-color:yellow" %)USB TTL RXD <~-~-~-~-> UART_TXD
211 +**~ (% style="background-color:yellow" %)USB TTL TXD <~-~-~-~-> UART_RXD(%%)**
208 208  
213 +**~ (% style="background-color:yellow" %)USB TTL RXD <~-~-~-~-> UART_TXD(%%)**
209 209  
215 +
210 210  In the PC, use below serial tool settings:
211 211  
212 212  * Baud:  (% style="color:green" %)**9600**
... ... @@ -221,8 +221,9 @@
221 221  
222 222  [[image:1657329814315-101.png]]
223 223  
230 +
224 224  (((
225 -(% style="color:red" %)Note: the valid AT Commands can be found at: (%%)[[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/]]
232 +(% style="color:red" %)**Note: the valid AT Commands can be found at: **(%%)**[[https:~~/~~/www.dropbox.com/sh/aaq2xcl0bzfu0yd/AAAEAHRa7Io_465ds4Y7-F3aa?dl=0>>https://www.dropbox.com/sh/aaq2xcl0bzfu0yd/AAAEAHRa7Io_465ds4Y7-F3aa?dl=0]]**
226 226  )))
227 227  
228 228  
... ... @@ -229,9 +229,10 @@
229 229  
230 230  === 2.2.4 Use CoAP protocol to uplink data ===
231 231  
232 -(% style="color:red" %)Note: if you don't have CoAP server, you can refer this link to set up one: (%%)[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
233 233  
240 +(% style="color:red" %)**Note: if you don't have CoAP server, you can refer this link to set up one: **(%%)**[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]**
234 234  
242 +
235 235  (((
236 236  **Use below commands:**
237 237  )))
... ... @@ -240,21 +240,29 @@
240 240  (% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
241 241  )))
242 242  * (((
243 -(% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
251 +(% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/  to set CoAP server address and port
244 244  )))
245 245  * (((
246 -(% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
254 +(% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/  Set COAP resource path
255 +
256 +
257 +
247 247  )))
248 248  
249 249  (((
250 250  For parameter description, please refer to AT command set
262 +
263 +
251 251  )))
252 252  
253 253  [[image:1657330452568-615.png]]
254 254  
255 255  
269 +
256 256  (((
257 257  After configure the server address and (% style="color:green" %)**reset the device**(%%) (via AT+ATZ ), NDDS75 will start to uplink sensor values to CoAP server.
272 +
273 +
258 258  )))
259 259  
260 260  [[image:1657330472797-498.png]]
... ... @@ -264,9 +264,9 @@
264 264  === 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
265 265  
266 266  
267 -* (% style="color:blue" %)**AT+PRO=2   ** (%%) ~/~/ Set to use UDP protocol to uplink
268 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/ to set UDP server address and port
269 -* (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/ If the server does not respond, this command is unnecessary
283 +* (% style="color:blue" %)**AT+PRO=2   ** (%%) ~/~/  Set to use UDP protocol to uplink
284 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/  to set UDP server address and port
285 +* (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/  If the server does not respond, this command is unnecessary
270 270  
271 271  [[image:1657330501006-241.png]]
272 272  
... ... @@ -278,13 +278,13 @@
278 278  === 2.2.6 Use MQTT protocol to uplink data ===
279 279  
280 280  
281 -* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
282 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
283 -* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
284 -* (% style="color:blue" %)**AT+UNAME=UNAME                                **(%%)~/~/Set the username of MQTT
285 -* (% style="color:blue" %)**AT+PWD=PWD                                         **(%%)~/~/Set the password of MQTT
286 -* (% style="color:blue" %)**AT+PUBTOPIC=NDDS75_PUB                 **(%%)~/~/Set the sending topic of MQTT
287 -* (% style="color:blue" %)**AT+SUBTOPIC=NDDS75_SUB          **(%%) ~/~/Set the subscription topic of MQTT
297 +* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/  Set to use MQTT protocol to uplink
298 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/  Set MQTT server address and port
299 +* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/  Set up the CLIENT of MQTT
300 +* (% style="color:blue" %)**AT+UNAME=UNAME                                **(%%)~/~/  Set the username of MQTT
301 +* (% style="color:blue" %)**AT+PWD=PWD                                         **(%%)~/~/  Set the password of MQTT
302 +* (% style="color:blue" %)**AT+PUBTOPIC=NDDS75_PUB                 **(%%)~/~/  Set the sending topic of MQTT
303 +* (% style="color:blue" %)**AT+SUBTOPIC=NDDS75_SUB          **(%%) ~/~/  Set the subscription topic of MQTT
288 288  
289 289  [[image:1657249978444-674.png]]
290 290  
... ... @@ -301,8 +301,8 @@
301 301  === 2.2.7 Use TCP protocol to uplink data ===
302 302  
303 303  
304 -* (% style="color:blue" %)**AT+PRO=4   ** (%%) ~/~/ Set to use TCP protocol to uplink
305 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5600   **(%%) ~/~/ to set TCP server address and port
320 +* (% style="color:blue" %)**AT+PRO=4   ** (%%) ~/~/  Set to use TCP protocol to uplink
321 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5600   **(%%) ~/~/  to set TCP server address and port
306 306  
307 307  [[image:image-20220709093918-1.png]]
308 308  
... ... @@ -313,26 +313,35 @@
313 313  
314 314  === 2.2.8 Change Update Interval ===
315 315  
332 +
316 316  User can use below command to change the (% style="color:green" %)**uplink interval**.
317 317  
318 -* (% style="color:blue" %)**AT+TDC=600      ** (%%)~/~/ Set Update Interval to 600s
335 +* (% style="color:blue" %)**AT+TDC=600      ** (%%)~/~/  Set Update Interval to 600s
319 319  
320 320  (((
338 +
339 +
340 +
321 321  (% style="color:red" %)**NOTE:**
322 -)))
323 323  
324 -(((
325 -(% style="color:red" %)1. By default, the device will send an uplink message every 1 hour.
343 +(% style="color:red" %)**1. By default, the device will send an uplink message every 1 hour.**
344 +
345 +(% style="color:red" %)**2. When the firmware version is v1.3.2 and later firmware:**
326 326  )))
327 327  
348 +(% style="color:red" %)**By default, the device will send an uplink message every 2 hours. Each Uplink Include 8 set of records in this 2 hour (15 minute interval / record).**
328 328  
329 329  
351 +
330 330  == 2.3  Uplink Payload ==
331 331  
332 -In this mode, uplink payload includes in total 14 bytes
333 333  
355 +=== 2.3.1  Before Firmware v1.3.2 ===
334 334  
335 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:450px" %)
357 +
358 +In this mode, uplink payload includes in total 14 bytes
359 +
360 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:440px" %)
336 336  |=(% style="width: 60px;" %)(((
337 337  **Size(bytes)**
338 338  )))|=(% style="width: 60px;" %)**6**|=(% style="width: 35px;" %)2|=(% style="width: 35px;" %)**2**|=(% style="width: 80px;" %)**1**|=(% style="width: 100px;" %)**2**|=(% style="width: 60px;" %)**1**
... ... @@ -345,43 +345,78 @@
345 345  
346 346  [[image:1657331036973-987.png]]
347 347  
348 -(((
373 +
374 +
375 +The payload is **ASCII** string, representative same HEX:
376 +
377 +(% style="background-color:yellow" %)**0x 724031556159 0064 0c6c 19 0292 00 **
378 +
379 +**where :**
380 +
381 +* (% style="color:#037691" %)**Device ID:**(%%) 0x724031556159 = 724031556159
382 +
383 +* (% style="color:#037691" %)**Version:**(%%)  0x0064=100=1.0.0
384 +
385 +* (% style="color:#037691" %)**BAT:** (%%) 0x0c6c = 3180 mV = 3.180V
386 +
387 +* (% style="color:#037691" %)**Signal:**(%%)  0x19 = 25
388 +
389 +* (% style="color:#037691" %)**Distance:**  (%%)0x0292= 658 mm
390 +
391 +* (% style="color:#037691" %)**Interrupt:**(%%) 0x00 = 0
392 +
393 +
394 +
395 +=== **2.3.2  Since firmware v1.3.2** ===
396 +
397 +
398 +In this mode, uplink payload includes 69 bytes in total by default.
399 +
400 +Each time the device uploads a data package, 8 sets of recorded data will be attached. Up to 32 sets of recorded data can be uploaded.
401 +
402 +(% border="2" style="background-color:#ffffcc; color:green; width:896px" %)
403 +|(% style="width:95px" %)**Size(bytes)**|(% style="width:84px" %)**8**|(% style="width:44px" %)2|(% style="width:48px" %)2|(% style="width:123px" %)1|(% style="width:55px" %)1|(% style="width:80px" %)1|(% style="width:77px" %)2|(% style="width:94px" %)4|(% style="width:77px" %)2|(% style="width:116px" %)4
404 +|(% style="width:95px" %)**Value**|(% style="width:84px" %)Device ID|(% style="width:44px" %)Ver|(% style="width:48px" %)BAT|(% style="width:123px" %)Signal Strength|(% style="width:55px" %)MOD|(% style="width:80px" %)Interrupt|(% style="width:77px" %)Distance|(% style="width:94px" %)Timestamp|(% style="width:77px" %)Distance|(% style="width:116px" %)Timestamp.......
405 +
406 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDDS75 uplink data.
407 +
408 +[[image:image-20220908175246-1.png]]
409 +
410 +
349 349  The payload is ASCII string, representative same HEX:
350 -)))
351 351  
352 -(((
353 -0x72403155615900640c6c19029200 where:
354 -)))
413 +**0x (% style="color:red" %)f867787050213317 (% style="color:blue" %)0084 (% style="color:green" %)0cf4 (% style="color:#00b0f0" %)1e (% style="color:#7030a0" %)01 (% style="color:#d60093" %)00(% style="color:#a14d07" %) 0039 (% style="color:#0020b0" %)6315537b (% style="color:#663300" %)00396319baf0 00396319ba3c 00396319b988 00396319b8d4 00396319b820 00396319b76c 00396319b6b8 00396319b604 (%%)**
355 355  
356 -* (((
357 -Device ID: 0x724031556159 = 724031556159
358 -)))
359 -* (((
360 -Version: 0x0064=100=1.0.0
361 -)))
415 +**where:**
362 362  
363 -* (((
364 -BAT: 0x0c6c = 3180 mV = 3.180V
365 -)))
366 -* (((
367 -Signal: 0x19 = 25
368 -)))
369 -* (((
370 -Distance: 0x0292= 658 mm
371 -)))
372 -* (((
373 -Interrupt: 0x00 = 0
417 +* (% style="color:#037691" %)**Device ID:**(%%) f867787050213317 = f867787050213317
374 374  
419 +* (% style="color:#037691" %)**Version:**(%%) 0x0084=132=1.3.2
375 375  
421 +* (% style="color:#037691" %)**BAT:**(%%)  0x0cf4 = 3316 mV = 3.316V
376 376  
377 -
378 -)))
423 +* (% style="color:#037691" %)**Singal:**(%%)  0x1e = 30
379 379  
425 +* (% style="color:#037691" %)**Mod:**(%%)**  **0x01 = 1
426 +
427 +* (% style="color:#037691" %)**Interrupt:**(%%) 0x00= 0
428 +
429 +* (% style="color:#037691" %)**Distance:**(%%) 0x0039= 57 = 57
430 +
431 +* (% style="color:#037691" %)**Time stamp:**(%%) 0x6315537b =1662342011  ([[Unix Epoch Time>>url:http://www.epochconverter.com/]])
432 +
433 +* (% style="color:#037691" %)**Distance,Time stamp:**(%%) 00396319baf0
434 +
435 +* (% style="color:#037691" %)**8 sets of recorded data: Distance,Time stamp :**(%%) //**00396319ba3c**//,.......
436 +
437 +
438 +
380 380  == 2.4  Payload Explanation and Sensor Interface ==
381 381  
382 382  
383 383  === 2.4.1  Device ID ===
384 384  
444 +
385 385  (((
386 386  By default, the Device ID equal to the last 6 bytes of IMEI.
387 387  )))
... ... @@ -388,10 +388,12 @@
388 388  
389 389  (((
390 390  User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID
451 +
452 +
391 391  )))
392 392  
393 393  (((
394 -**Example:**
456 +(% style="color:blue" %)**Example :**
395 395  )))
396 396  
397 397  (((
... ... @@ -399,13 +399,26 @@
399 399  )))
400 400  
401 401  (((
402 -The Device ID is stored in a none-erase area, Upgrade the firmware or run **AT+FDR** won't erase Device ID.
464 +The Device ID is stored in a none-erase area, Upgrade the firmware or run (% style="color:blue" %)**AT+FDR**(%%) won't erase Device ID.
403 403  )))
404 404  
405 405  
468 +(% style="color:red" %)**NOTE: When the firmware version is v1.3.2 and later firmware:**
406 406  
470 +(% style="color:red" %)**By default, the Device ID equal to the last 15 bits of IMEI.**
471 +
472 +User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID
473 +
474 +
475 +(% style="color:blue" %)**Example :**
476 +
477 +AT+DEUI=868411056754138
478 +
479 +
480 +
407 407  === 2.4.2  Version Info ===
408 408  
483 +
409 409  (((
410 410  Specify the software version: 0x64=100, means firmware version 1.00.
411 411  )))
... ... @@ -418,6 +418,7 @@
418 418  
419 419  === 2.4.3  Battery Info ===
420 420  
496 +
421 421  (((
422 422  Ex1: 0x0B45 = 2885mV
423 423  )))
... ... @@ -430,6 +430,7 @@
430 430  
431 431  === 2.4.4  Signal Strength ===
432 432  
509 +
433 433  (((
434 434  NB-IoT Network signal Strength.
435 435  )))
... ... @@ -462,9 +462,12 @@
462 462  
463 463  === 2.4.5  Distance ===
464 464  
542 +
465 465  Get the distance. Flat object range 280mm - 7500mm.
466 466  
545 +(((
467 467  For example, if the data you get from the register is **__0x0B 0x05__**, the distance between the sensor and the measured object is
547 +)))
468 468  
469 469  (((
470 470  (((
... ... @@ -482,6 +482,7 @@
482 482  
483 483  === 2.4.6  Digital Interrupt ===
484 484  
565 +
485 485  (((
486 486  Digital Interrupt refers to pin (% style="color:blue" %)**GPIO_EXTI**(%%), and there are different trigger methods. When there is a trigger, the NDDS75 will send a packet to the server.
487 487  )))
... ... @@ -491,7 +491,7 @@
491 491  )))
492 492  
493 493  (((
494 -(% style="color:blue" %)**AT+INTMOD=3 **(%%) ~/~/(more info about INMOD please refer [[**AT Command Manual**>>url:https://www.dragino.com/downloads/downloads/NB-IoT/NBSN95/DRAGINO_NBSN95-NB_AT%20Commands_v1.1.0.pdf]])**.**
575 +(% style="color:blue" %)**AT+INTMOD=3 **(%%) ~/~/  (more info about INMOD please refer [[**AT Command Manual**>>url:https://www.dragino.com/downloads/downloads/NB-IoT/NBSN95/DRAGINO_NBSN95-NB_AT%20Commands_v1.1.0.pdf]])**.**
495 495  )))
496 496  
497 497  
... ... @@ -516,6 +516,7 @@
516 516  
517 517  === 2.4.7  ​+5V Output ===
518 518  
600 +
519 519  (((
520 520  NDDS75 will enable +5V output before all sampling and disable the +5v after all sampling. 
521 521  )))
... ... @@ -523,10 +523,14 @@
523 523  
524 524  (((
525 525  The 5V output time can be controlled by AT Command.
608 +
609 +
526 526  )))
527 527  
528 528  (((
529 529  (% style="color:blue" %)**AT+5VT=1000**
614 +
615 +
530 530  )))
531 531  
532 532  (((
... ... @@ -537,6 +537,7 @@
537 537  
538 538  == 2.5  Downlink Payload ==
539 539  
626 +
540 540  By default, NDDS75 prints the downlink payload to console port.
541 541  
542 542  [[image:image-20220709100028-1.png]]
... ... @@ -587,9 +587,55 @@
587 587  
588 588  
589 589  
590 -== 2.6  ​LED Indicator ==
677 +== 2.6  Distance alarm function(Since firmware v1.3.2) ==
591 591  
592 592  
680 +(% style="color:blue" %)** ➢ AT Command:**
681 +
682 +(% style="color:#037691" %)** AT+ LDDSALARM=min,max**
683 +
684 +² When min=0, and max≠0, Alarm higher than max
685 +
686 +² When min≠0, and max=0, Alarm lower than min
687 +
688 +² When min≠0 and max≠0, Alarm higher than max or lower than min
689 +
690 +
691 +(% style="color:blue" %)** Example:**
692 +
693 +**AT+ LDDSALARM=260,2000**  ~/~/ Alarm when distance lower than 260.
694 +
695 +
696 +
697 +== 2.7  Set the number of data to be uploaded and the recording time ==
698 +
699 +
700 +(% style="color:blue" %)** ➢ AT Command:**
701 +
702 +* (% style="color:#037691" %)** AT+TR=900** (%%) ~/~/ The unit is seconds, and the default is to record data once every 900 seconds.( The minimum can be set to 180 seconds)
703 +* (% style="color:#037691" %)** AT+NOUD=8**             (%%) ~/~/  The device uploads 8 sets of recorded data by default. Up to 32 sets of record data can be uploaded.
704 +
705 + The diagram below explains the relationship between TR, NOUD, and TDC more clearly**:**
706 +
707 +[[image:image-20221009001114-1.png||height="687" width="955"]]
708 +
709 +
710 +
711 +== 2.8  Read or Clear cached data ==
712 +
713 +
714 +(% style="color:blue" %)** ➢ AT Command:**
715 +
716 +* (% style="color:#037691" %)** AT+CDP ** (%%) ~/~/  Read cached data
717 +* (% style="color:#037691" %)** AT+CDP=0**  (%%) ~/~/  Clear cached data
718 +
719 +[[image:image-20220908175333-2.png]]
720 +
721 +
722 +
723 +== 2.9  ​LED Indicator ==
724 +
725 +
593 593  The NDDS75 has an internal LED which is to show the status of different state.
594 594  
595 595  
... ... @@ -604,23 +604,27 @@
604 604  
605 605  
606 606  
607 -== 2.7  ​Firmware Change Log ==
740 +== 2.10  ​Firmware Change Log ==
608 608  
609 609  
610 -Download URL & Firmware Change log
743 +(((
744 +Download URL & Firmware Change log:  [[https:~~/~~/www.dropbox.com/sh/3hb94r49iszmstx/AADvSJcXxahEUfxqKWVnZx-La?dl=0>>https://www.dropbox.com/sh/3hb94r49iszmstx/AADvSJcXxahEUfxqKWVnZx-La?dl=0]]
745 +)))
611 611  
612 612  (((
613 -[[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/Firmware/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/Firmware/]]
748 +
614 614  )))
615 615  
751 +(((
752 +Upgrade Instruction: [[Upgrade Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
753 +)))
616 616  
617 -Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
618 618  
619 619  
757 +== 2.11  ​Battery Analysis ==
620 620  
621 -== 2.8  ​Battery Analysis ==
622 622  
623 -=== 2.8.1  ​Battery Type ===
760 +=== 2.11.1  ​Battery Type ===
624 624  
625 625  
626 626  (((
... ... @@ -645,8 +645,9 @@
645 645  
646 646  
647 647  
648 -=== 2.8.2  Power consumption Analyze ===
785 +=== 2.11.2  Power consumption Analyze ===
649 649  
787 +
650 650  (((
651 651  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
652 652  )))
... ... @@ -683,8 +683,9 @@
683 683  
684 684  
685 685  
686 -=== 2.8.3  ​Battery Note ===
824 +=== 2.11.3  ​Battery Note ===
687 687  
826 +
688 688  (((
689 689  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
690 690  )))
... ... @@ -691,8 +691,9 @@
691 691  
692 692  
693 693  
694 -=== 2.8.4  Replace the battery ===
833 +=== 2.11.4  Replace the battery ===
695 695  
835 +
696 696  (((
697 697  The default battery pack of NDDS75 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
698 698  )))
... ... @@ -701,6 +701,7 @@
701 701  
702 702  = 3. ​ Access NB-IoT Module =
703 703  
844 +
704 704  (((
705 705  Users can directly access the AT command set of the NB-IoT module.
706 706  )))
... ... @@ -707,6 +707,8 @@
707 707  
708 708  (((
709 709  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
851 +
852 +
710 710  )))
711 711  
712 712  [[image:1657333200519-600.png]]
... ... @@ -715,84 +715,103 @@
715 715  
716 716  = 4.  Using the AT Commands =
717 717  
861 +
718 718  == 4.1  Access AT Commands ==
719 719  
720 -See this link for detail: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
721 721  
865 +See this link for detail:  [[https:~~/~~/www.dropbox.com/sh/aaq2xcl0bzfu0yd/AAAEAHRa7Io_465ds4Y7-F3aa?dl=0>>https://www.dropbox.com/sh/aaq2xcl0bzfu0yd/AAAEAHRa7Io_465ds4Y7-F3aa?dl=0]]
722 722  
723 -AT+<CMD>?  : Help on <CMD>
724 724  
725 -AT+<CMD>         : Run <CMD>
868 +AT+<CMD>?  :  Help on <CMD>
726 726  
727 -AT+<CMD>=<value> : Set the value
870 +AT+<CMD>         :  Run <CMD>
728 728  
729 -AT+<CMD>=?  : Get the value
872 +AT+<CMD>=<value> :  Set the value
730 730  
874 +AT+<CMD>=?  :  Get the value
731 731  
876 +
732 732  (% style="color:#037691" %)**General Commands**(%%)      
733 733  
734 -AT  : Attention       
879 +AT  :  Attention       
735 735  
736 -AT?  : Short Help     
881 +AT?  :  Short Help     
737 737  
738 -ATZ  : MCU Reset    
883 +ATZ  :  MCU Reset    
739 739  
740 -AT+TDC  : Application Data Transmission Interval
885 +AT+TDC  :  Application Data Transmission Interval
741 741  
742 -AT+CFG  : Print all configurations
887 +AT+CFG  :  Print all configurations
743 743  
744 -AT+CFGMOD           : Working mode selection
889 +AT+CFGMOD           :  Working mode selection
745 745  
746 -AT+INTMOD            : Set the trigger interrupt mode
891 +AT+INTMOD            :  Set the trigger interrupt mode
747 747  
748 -AT+5VT  : Set extend the time of 5V power  
893 +AT+5VT  :  Set extend the time of 5V power  
749 749  
750 -AT+PRO  : Choose agreement
895 +AT+PRO  :  Choose agreement
751 751  
752 -AT+WEIGRE  : Get weight or set weight to 0
897 +AT+WEIGRE  :  Get weight or set weight to 0
753 753  
754 -AT+WEIGAP  : Get or Set the GapValue of weight
899 +AT+WEIGAP  :  Get or Set the GapValue of weight
755 755  
756 -AT+RXDL  : Extend the sending and receiving time
901 +AT+RXDL  :  Extend the sending and receiving time
757 757  
758 -AT+CNTFAC  : Get or set counting parameters
903 +AT+CNTFAC  :  Get or set counting parameters
759 759  
760 -AT+SERVADDR  : Server Address
905 +AT+SERVADDR  :  Server Address
761 761  
907 +AT+TR  :  Get or Set record time"
762 762  
909 +AT+APN     :  Get or set the APN
910 +
911 +AT+FBAND  :  Get or Set whether to automatically modify the frequency band
912 +
913 +AT+DNSCFG  : Get or Set DNS Server
914 +
915 +AT+GETSENSORVALUE   :  Returns the current sensor measurement
916 +
917 +AT+NOUD  :  Get or Set the number of data to be uploaded
918 +
919 +AT+CDP     :  Read or Clear cached data
920 +
921 +AT+LDDSALARM :  Get or Set alarm of distance
922 +
923 +
763 763  (% style="color:#037691" %)**COAP Management**      
764 764  
765 -AT+URI            : Resource parameters
926 +AT+URI            :  Resource parameters
766 766  
767 767  
768 768  (% style="color:#037691" %)**UDP Management**
769 769  
770 -AT+CFM          : Upload confirmation mode (only valid for UDP)
931 +AT+CFM          :  Upload confirmation mode (only valid for UDP)
771 771  
772 772  
773 773  (% style="color:#037691" %)**MQTT Management**
774 774  
775 -AT+CLIENT               : Get or Set MQTT client
936 +AT+CLIENT  :  Get or Set MQTT client
776 776  
777 -AT+UNAME  : Get or Set MQTT Username
938 +AT+UNAME  :  Get or Set MQTT Username
778 778  
779 -AT+PWD                  : Get or Set MQTT password
940 +AT+PWD  :  Get or Set MQTT password
780 780  
781 -AT+PUBTOPIC  : Get or Set MQTT publish topic
942 +AT+PUBTOPIC  :  Get or Set MQTT publish topic
782 782  
783 -AT+SUBTOPIC  : Get or Set MQTT subscription topic
944 +AT+SUBTOPIC  :  Get or Set MQTT subscription topic
784 784  
785 785  
786 786  (% style="color:#037691" %)**Information**          
787 787  
788 -AT+FDR  : Factory Data Reset
949 +AT+FDR  :  Factory Data Reset
789 789  
790 -AT+PWORD  : Serial Access Password
951 +AT+PWORD  :  Serial Access Password
791 791  
792 792  
793 793  
794 794  = ​5.  FAQ =
795 795  
957 +
796 796  == 5.1 ​ How to Upgrade Firmware ==
797 797  
798 798  
... ... @@ -805,7 +805,7 @@
805 805  )))
806 806  
807 807  (((
808 -(% style="color:red" %)Notice, NDDS75 and LDDS75 share the same mother board. They use the same connection and method to update.
970 +(% style="color:red" %)**Notice, NDDS75 and LDDS75 share the same mother board. They use the same connection and method to update.**
809 809  )))
810 810  
811 811  
... ... @@ -812,6 +812,7 @@
812 812  
813 813  = 6.  Trouble Shooting =
814 814  
977 +
815 815  == 6.1  ​Connection problem when uploading firmware ==
816 816  
817 817  
... ... @@ -827,6 +827,7 @@
827 827  
828 828  == 6.2  AT Command input doesn't work ==
829 829  
993 +
830 830  (((
831 831  In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
832 832  
... ... @@ -852,7 +852,7 @@
852 852  
853 853  (% style="color:#037691" %)**Package Includes**:
854 854  
855 -* NSE01 NB-IoT Distance Detect Sensor Node x 1
1019 +* NDDS75 NB-IoT Distance Detect Sensor Node x 1
856 856  * External antenna x 1
857 857  )))
858 858  
... ... @@ -859,9 +859,9 @@
859 859  (((
860 860  
861 861  
1026 +
862 862  (% style="color:#037691" %)**Dimension and weight**:
863 863  
864 -
865 865  * Device Size: 13.0 x 5 x 4.5 cm
866 866  * Device Weight: 150g
867 867  * Package Size / pcs : 15 x 12x 5.5 cm
... ... @@ -877,5 +877,6 @@
877 877  
878 878  = 9.  Support =
879 879  
1044 +
880 880  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
881 881  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20220908175246-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +55.7 KB
Content
image-20220908175333-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.David
Size
... ... @@ -1,0 +1,1 @@
1 +31.1 KB
Content
image-20221009001114-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +282.9 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0