Last modified by Bei Jinggeng on 2024/05/31 09:53
<
From version < 97.14 >
edited by Xiaoling
on 2022/07/09 11:47
To version < 86.1 >
edited by Xiaoling
on 2022/07/09 09:35
>
Change comment: Uploaded new attachment "1657330533775-472.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -7,7 +7,6 @@
7 7  
8 8  **Table of Contents:**
9 9  
10 -{{toc/}}
11 11  
12 12  
13 13  
... ... @@ -22,39 +22,20 @@
22 22  
23 23  
24 24  (((
25 -(((
26 26  The Dragino NDDS75 is a (% style="color:blue" %)**NB-IoT Distance Detection Sensor**(%%) for Internet of Things solution. It is designed to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
25 +\\The NDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to IoT Server via NB-IoT Network.
26 +\\NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
27 +\\NDDS75 supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP** (%%)for different application requirement.
28 +\\NDDS75 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
29 +\\To use NDDS75, user needs to check if there is NB-IoT coverage in local area and with the bands NDDS75 supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install NDDS75 to get NB-IoT network connection.
27 27  )))
28 28  
29 -(((
30 -
31 -The NDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to IoT Server via NB-IoT Network.
32 +
32 32  )))
33 33  
34 -(((
35 +[[image:1654503236291-817.png]]
35 35  
36 -NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
37 -)))
38 38  
39 -(((
40 -
41 -NDDS75 supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP** (%%)for different application requirement.
42 -)))
43 -
44 -(((
45 -
46 -NDDS75 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
47 -)))
48 -
49 -(((
50 -
51 -To use NDDS75, user needs to check if there is NB-IoT coverage in local area and with the bands NDDS75 supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install NDDS75 to get NB-IoT network connection.
52 -)))
53 -)))
54 -
55 -
56 -)))
57 -
58 58  [[image:1657327959271-447.png]]
59 59  
60 60  
... ... @@ -76,6 +76,7 @@
76 76  * 8500mAh Battery for long term use
77 77  
78 78  
59 +
79 79  == 1.3  Specification ==
80 80  
81 81  
... ... @@ -93,6 +93,7 @@
93 93  * - B20 @H-FDD: 800MHz
94 94  * - B28 @H-FDD: 700MHz
95 95  
77 +
96 96  (% style="color:#037691" %)**Battery:**
97 97  
98 98  * Li/SOCI2 un-chargeable battery
... ... @@ -101,6 +101,7 @@
101 101  * Max continuously current: 130mA
102 102  * Max boost current: 2A, 1 second
103 103  
86 +
104 104  (% style="color:#037691" %)**Power Consumption**
105 105  
106 106  * STOP Mode: 10uA @ 3.3v
... ... @@ -107,6 +107,8 @@
107 107  * Max transmit power: 350mA@3.3v
108 108  
109 109  
93 +
94 +
110 110  == ​1.4  Applications ==
111 111  
112 112  * Smart Buildings & Home Automation
... ... @@ -120,6 +120,7 @@
120 120  ​
121 121  
122 122  
108 +
123 123  == 1.5  Pin Definitions ==
124 124  
125 125  
... ... @@ -127,6 +127,7 @@
127 127  
128 128  
129 129  
116 +
130 130  = 2.  Use NDDS75 to communicate with IoT Server =
131 131  
132 132  == 2.1  How it works ==
... ... @@ -232,64 +232,56 @@
232 232  (% style="color:red" %)Note: if you don't have CoAP server, you can refer this link to set up one: (%%)[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
233 233  
234 234  
235 -(((
236 236  **Use below commands:**
237 -)))
238 238  
239 -* (((
240 -(% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
241 -)))
242 -* (((
243 -(% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
244 -)))
245 -* (((
246 -(% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
247 -)))
224 +* (% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
225 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
226 +* (% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
248 248  
249 -(((
250 250  For parameter description, please refer to AT command set
251 -)))
252 252  
253 -[[image:1657330452568-615.png]]
230 +[[image:1657249793983-486.png]]
254 254  
255 255  
256 -(((
257 -After configure the server address and (% style="color:green" %)**reset the device**(%%) (via AT+ATZ ), NDDS75 will start to uplink sensor values to CoAP server.
258 -)))
233 +After configure the server address and (% style="color:green" %)**reset the device**(%%) (via AT+ATZ ), NSE01 will start to uplink sensor values to CoAP server.
259 259  
260 -[[image:1657330472797-498.png]]
235 +[[image:1657249831934-534.png]]
261 261  
262 262  
263 263  
264 264  === 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
265 265  
241 +This feature is supported since firmware version v1.0.1
266 266  
267 -* (% style="color:blue" %)**AT+PRO=2   ** (%%) ~/~/ Set to use UDP protocol to uplink
243 +
244 +* (% style="color:blue" %)**AT+PRO=2   ** (%%) ~/~/ Set to use UDP protocol to uplink
268 268  * (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/ to set UDP server address and port
269 -* (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/ If the server does not respond, this command is unnecessary
246 +* (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/If the server does not respond, this command is unnecessary
270 270  
271 -[[image:1657330501006-241.png]]
248 +[[image:1657249864775-321.png]]
272 272  
273 273  
274 -[[image:1657330533775-472.png]]
251 +[[image:1657249930215-289.png]]
275 275  
276 276  
277 277  
278 278  === 2.2.6 Use MQTT protocol to uplink data ===
279 279  
257 +This feature is supported since firmware version v110
280 280  
281 -* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
282 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
283 -* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
284 -* (% style="color:blue" %)**AT+UNAME=UNAME                                **(%%)~/~/Set the username of MQTT
285 -* (% style="color:blue" %)**AT+PWD=PWD                                         **(%%)~/~/Set the password of MQTT
286 -* (% style="color:blue" %)**AT+PUBTOPIC=NDDS75_PUB                 **(%%)~/~/Set the sending topic of MQTT
287 -* (% style="color:blue" %)**AT+SUBTOPIC=NDDS75_SUB          **(%%) ~/~/Set the subscription topic of MQTT
288 288  
260 +* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
261 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
262 +* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
263 +* (% style="color:blue" %)**AT+UNAME=UNAME                               **(%%)~/~/Set the username of MQTT
264 +* (% style="color:blue" %)**AT+PWD=PWD                                        **(%%)~/~/Set the password of MQTT
265 +* (% style="color:blue" %)**AT+PUBTOPIC=NSE01_PUB                    **(%%)~/~/Set the sending topic of MQTT
266 +* (% style="color:blue" %)**AT+SUBTOPIC=NSE01_SUB          **(%%) ~/~/Set the subscription topic of MQTT
267 +
289 289  [[image:1657249978444-674.png]]
290 290  
291 291  
292 -[[image:1657330723006-866.png]]
271 +[[image:1657249990869-686.png]]
293 293  
294 294  
295 295  (((
... ... @@ -300,14 +300,16 @@
300 300  
301 301  === 2.2.7 Use TCP protocol to uplink data ===
302 302  
282 +This feature is supported since firmware version v110
303 303  
284 +
304 304  * (% style="color:blue" %)**AT+PRO=4   ** (%%) ~/~/ Set to use TCP protocol to uplink
305 305  * (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5600   **(%%) ~/~/ to set TCP server address and port
306 306  
307 -[[image:image-20220709093918-1.png]]
288 +[[image:1657250217799-140.png]]
308 308  
309 309  
310 -[[image:image-20220709093918-2.png]]
291 +[[image:1657250255956-604.png]]
311 311  
312 312  
313 313  
... ... @@ -329,54 +329,36 @@
329 329  
330 330  == 2.3  Uplink Payload ==
331 331  
332 -In this mode, uplink payload includes in total 14 bytes
313 +In this mode, uplink payload includes in total 18 bytes
333 333  
334 -
335 335  (% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
336 336  |=(% style="width: 60px;" %)(((
337 337  **Size(bytes)**
338 -)))|=(% style="width: 60px;" %)**6**|=(% style="width: 35px;" %)2|=(% style="width: 35px;" %)**2**|=(% style="width: 80px;" %)**1**|=(% style="width: 80px;" %)**2**|=(% style="width: 60px;" %)**1**
339 -|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:120px" %)[[Distance (unit: mm)>>||anchor="H2.4.5A0Distance"]]|(% style="width:80px" %)[[Interrupt>>||anchor="H2.4.6A0DigitalInterrupt"]]
318 +)))|=(% style="width: 50px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 60px;" %)**2**|=(% style="width: 80px;" %)**2**|=(% style="width: 90px;" %)**2**|=(% style="width: 50px;" %)**1**
319 +|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:108px" %)[[Soil Moisture>>||anchor="H2.4.5A0SoilMoisture"]]|(% style="width:133px" %)[[Soil Temperature>>||anchor="H2.4.6A0SoilTemperature"]]|(% style="width:159px" %)[[Soil Conductivity(EC)>>||anchor="H2.4.7A0SoilConductivity28EC29"]]|(% style="width:80px" %)[[Interrupt>>||anchor="H2.4.8A0DigitalInterrupt"]]
340 340  
341 341  (((
342 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NDDS751 uplink data.
322 +If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NSE01 uplink data.
343 343  )))
344 344  
345 345  
346 -[[image:1657331036973-987.png]]
326 +[[image:image-20220708111918-4.png]]
347 347  
348 -(((
328 +
349 349  The payload is ASCII string, representative same HEX:
350 -)))
351 351  
352 -(((
353 -0x72403155615900640c6c19029200 where:
354 -)))
331 +0x72403155615900640c7817075e0a8c02f900 where:
355 355  
356 -* (((
357 -Device ID: 0x724031556159 = 724031556159
358 -)))
359 -* (((
360 -Version: 0x0064=100=1.0.0
361 -)))
333 +* Device ID: 0x 724031556159 = 724031556159
334 +* Version: 0x0064=100=1.0.0
362 362  
363 -* (((
364 -BAT: 0x0c6c = 3180 mV = 3.180V
365 -)))
366 -* (((
367 -Signal: 0x19 = 25
368 -)))
369 -* (((
370 -Distance: 0x0292= 658 mm
371 -)))
372 -* (((
373 -Interrupt: 0x00 = 0
336 +* BAT: 0x0c78 = 3192 mV = 3.192V
337 +* Singal: 0x17 = 23
338 +* Soil Moisture: 0x075e= 1886 = 18.86  %
339 +* Soil Temperature:0x0a8c =2700=27 °C
340 +* Soil Conductivity(EC) = 0x02f9 =761 uS /cm
341 +* Interrupt: 0x00 = 0
374 374  
375 -
376 -
377 -
378 -)))
379 -
380 380  == 2.4  Payload Explanation and Sensor Interface ==
381 381  
382 382  
... ... @@ -399,7 +399,7 @@
399 399  )))
400 400  
401 401  (((
402 -The Device ID is stored in a none-erase area, Upgrade the firmware or run **AT+FDR** won't erase Device ID.
365 +The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
403 403  )))
404 404  
405 405  
... ... @@ -411,7 +411,7 @@
411 411  )))
412 412  
413 413  (((
414 -For example: 0x00 64 : this device is NDDS75 with firmware version 1.0.0.
377 +For example: 0x00 64 : this device is NSE01 with firmware version 1.0.0.
415 415  )))
416 416  
417 417  
... ... @@ -419,6 +419,10 @@
419 419  === 2.4.3  Battery Info ===
420 420  
421 421  (((
385 +Check the battery voltage for LSE01.
386 +)))
387 +
388 +(((
422 422  Ex1: 0x0B45 = 2885mV
423 423  )))
424 424  
... ... @@ -460,19 +460,65 @@
460 460  
461 461  
462 462  
463 -=== 2.4.5  Distance ===
430 +=== 2.4.5  Soil Moisture ===
464 464  
465 -Get the distance. Flat object range 280mm - 7500mm.
432 +(((
433 +(((
434 +Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
435 +)))
436 +)))
466 466  
467 -For example, if the data you get from the register is **__0x0B 0x05__**, the distance between the sensor and the measured object is
438 +(((
439 +(((
440 +For example, if the data you get from the register is **__0x05 0xDC__**, the moisture content in the soil is
441 +)))
442 +)))
468 468  
469 469  (((
445 +
446 +)))
447 +
470 470  (((
471 -(% style="color:blue" %)** 0B05(H) = 2821(D) = 2821mm.**
449 +(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
472 472  )))
451 +
452 +
453 +
454 +=== 2.4.6  Soil Temperature ===
455 +
456 +(((
457 +Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is __**0x09 0xEC**__, the temperature content in the soil is
473 473  )))
474 474  
475 475  (((
461 +**Example**:
462 +)))
463 +
464 +(((
465 +If payload is 0105H: ((0x0105 & 0x8000)>>15 === 0),temp = 0105(H)/100 = 2.61 °C
466 +)))
467 +
468 +(((
469 +If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/100 = -1.29 °C
470 +)))
471 +
472 +
473 +
474 +=== 2.4.7  Soil Conductivity (EC) ===
475 +
476 +(((
477 +Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
478 +)))
479 +
480 +(((
481 +For example, if the data you get from the register is __**0x00 0xC8**__, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
482 +)))
483 +
484 +(((
485 +Generally, the EC value of irrigation water is less than 800uS / cm.
486 +)))
487 +
488 +(((
476 476  
477 477  )))
478 478  
... ... @@ -480,10 +480,10 @@
480 480  
481 481  )))
482 482  
483 -=== 2.4.6  Digital Interrupt ===
496 +=== 2.4.8  Digital Interrupt ===
484 484  
485 485  (((
486 -Digital Interrupt refers to pin (% style="color:blue" %)**GPIO_EXTI**(%%), and there are different trigger methods. When there is a trigger, the NDDS75 will send a packet to the server.
499 +Digital Interrupt refers to pin (% style="color:blue" %)**GPIO_EXTI**(%%), and there are different trigger methods. When there is a trigger, the NSE01 will send a packet to the server.
487 487  )))
488 488  
489 489  (((
... ... @@ -514,10 +514,10 @@
514 514  
515 515  
516 516  
517 -=== 2.4.7  ​+5V Output ===
530 +=== 2.4.9  ​+5V Output ===
518 518  
519 519  (((
520 -NDDS75 will enable +5V output before all sampling and disable the +5v after all sampling. 
533 +NSE01 will enable +5V output before all sampling and disable the +5v after all sampling. 
521 521  )))
522 522  
523 523  
... ... @@ -537,9 +537,9 @@
537 537  
538 538  == 2.5  Downlink Payload ==
539 539  
540 -By default, NDDS75 prints the downlink payload to console port.
553 +By default, NSE01 prints the downlink payload to console port.
541 541  
542 -[[image:image-20220709100028-1.png]]
555 +[[image:image-20220708133731-5.png]]
543 543  
544 544  
545 545  (((
... ... @@ -575,7 +575,7 @@
575 575  )))
576 576  
577 577  (((
578 -If payload = 0x04FF, it will reset the NDDS75
591 +If payload = 0x04FF, it will reset the NSE01
579 579  )))
580 580  
581 581  
... ... @@ -589,48 +589,76 @@
589 589  
590 590  == 2.6  ​LED Indicator ==
591 591  
605 +(((
606 +The NSE01 has an internal LED which is to show the status of different state.
592 592  
593 -The NDDS75 has an internal LED which is to show the status of different state.
594 594  
595 -
596 -* When power on, NDDS75 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
609 +* When power on, NSE01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
597 597  * Then the LED will be on for 1 second means device is boot normally.
598 -* After NDDS75 join NB-IoT network. The LED will be ON for 3 seconds.
611 +* After NSE01 join NB-IoT network. The LED will be ON for 3 seconds.
599 599  * For each uplink probe, LED will be on for 500ms.
613 +)))
600 600  
615 +
616 +
617 +
618 +== 2.7  Installation in Soil ==
619 +
620 +__**Measurement the soil surface**__
621 +
601 601  (((
602 -
623 +Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting. [[https:~~/~~/img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg>>url:https://img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg]]
603 603  )))
604 604  
626 +[[image:1657259653666-883.png]] ​
605 605  
606 606  
607 -== 2.7  ​Firmware Change Log ==
629 +(((
630 +
608 608  
632 +(((
633 +Dig a hole with diameter > 20CM.
634 +)))
609 609  
610 -Download URL & Firmware Change log
636 +(((
637 +Horizontal insert the probe to the soil and fill the hole for long term measurement.
638 +)))
639 +)))
611 611  
641 +[[image:1654506665940-119.png]]
642 +
612 612  (((
613 -[[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/Firmware/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/Firmware/]]
644 +
614 614  )))
615 615  
616 616  
648 +== 2.8  ​Firmware Change Log ==
649 +
650 +
651 +Download URL & Firmware Change log
652 +
653 +[[www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/Firmware/]]
654 +
655 +
617 617  Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
618 618  
619 619  
620 620  
621 -== 2.8  ​Battery Analysis ==
660 +== 2.9  ​Battery Analysis ==
622 622  
623 -=== 2.8.1  ​Battery Type ===
662 +=== 2.9.1  ​Battery Type ===
624 624  
625 625  
626 626  (((
627 -The NDDS75 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
666 +The NSE01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
628 628  )))
629 629  
669 +
630 630  (((
631 631  The battery is designed to last for several years depends on the actually use environment and update interval. 
632 632  )))
633 633  
674 +
634 634  (((
635 635  The battery related documents as below:
636 636  )))
... ... @@ -640,12 +640,12 @@
640 640  * [[Lithium-ion Battery-Capacitor datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
641 641  
642 642  (((
643 -[[image:image-20220709101450-2.png]]
684 +[[image:image-20220708140453-6.png]]
644 644  )))
645 645  
646 646  
647 647  
648 -=== 2.8.2  Power consumption Analyze ===
689 +=== 2.9.2  Power consumption Analyze ===
649 649  
650 650  (((
651 651  Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
... ... @@ -679,11 +679,11 @@
679 679  And the Life expectation in difference case will be shown on the right.
680 680  )))
681 681  
682 -[[image:image-20220709110451-3.png]]
723 +[[image:image-20220708141352-7.jpeg]]
683 683  
684 684  
685 685  
686 -=== 2.8.3  ​Battery Note ===
727 +=== 2.9.3  ​Battery Note ===
687 687  
688 688  (((
689 689  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
... ... @@ -691,10 +691,10 @@
691 691  
692 692  
693 693  
694 -=== 2.8.4  Replace the battery ===
735 +=== 2.9.4  Replace the battery ===
695 695  
696 696  (((
697 -The default battery pack of NDDS75 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
738 +The default battery pack of NSE01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
698 698  )))
699 699  
700 700  
... ... @@ -709,7 +709,7 @@
709 709  The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
710 710  )))
711 711  
712 -[[image:1657333200519-600.png]]
753 +[[image:1657261278785-153.png]]
713 713  
714 714  
715 715  
... ... @@ -717,7 +717,7 @@
717 717  
718 718  == 4.1  Access AT Commands ==
719 719  
720 -See this link for detail: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
761 +See this link for detail: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
721 721  
722 722  
723 723  AT+<CMD>?  : Help on <CMD>
... ... @@ -805,11 +805,18 @@
805 805  )))
806 806  
807 807  (((
808 -(% style="color:red" %)Notice, NDDS75 and LDDS75 share the same mother board. They use the same connection and method to update.
849 +(% style="color:red" %)Notice, NSE01 and LSE01 share the same mother board. They use the same connection and method to update.
809 809  )))
810 810  
811 811  
812 812  
854 +== 5.2  Can I calibrate NSE01 to different soil types? ==
855 +
856 +(((
857 +NSE01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
858 +)))
859 +
860 +
813 813  = 6.  Trouble Shooting =
814 814  
815 815  == 6.1  ​Connection problem when uploading firmware ==
... ... @@ -837,7 +837,7 @@
837 837  = 7. ​ Order Info =
838 838  
839 839  
840 -Part Number**:** (% style="color:#4f81bd" %)**NSDDS75**
888 +Part Number**:** (% style="color:#4f81bd" %)**NSE01**
841 841  
842 842  
843 843  (% class="wikigeneratedid" %)
... ... @@ -852,7 +852,7 @@
852 852  
853 853  (% style="color:#037691" %)**Package Includes**:
854 854  
855 -* NSE01 NB-IoT Distance Detect Sensor Node x 1
903 +* NSE01 NB-IoT Soil Moisture & EC Sensor x 1
856 856  * External antenna x 1
857 857  )))
858 858  
... ... @@ -861,11 +861,8 @@
861 861  
862 862  (% style="color:#037691" %)**Dimension and weight**:
863 863  
864 -
865 -* Device Size: 13.0 x 5 x 4.5 cm
866 -* Device Weight: 150g
867 -* Package Size / pcs : 15 x 12x 5.5 cm
868 -* Weight / pcs : 220g
912 +* Size: 195 x 125 x 55 mm
913 +* Weight:   420g
869 869  )))
870 870  
871 871  (((
1657330723006-866.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -74.1 KB
Content
1657331036973-987.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -83.8 KB
Content
1657332990863-496.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -138.2 KB
Content
1657333200519-600.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -126.1 KB
Content
image-20220709093918-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -42.2 KB
Content
image-20220709093918-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -61.9 KB
Content
image-20220709100028-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.8 KB
Content
image-20220709101450-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -138.5 KB
Content
image-20220709110451-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -611.5 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0