Last modified by Bei Jinggeng on 2024/05/31 09:53
<
From version < 77.2 >
edited by Xiaoling
on 2022/07/09 09:05
To version < 64.3 >
edited by Xiaoling
on 2022/07/08 14:37
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDDS75 NB-IoT Distance Detect Sensor User Manual
1 +NSE01 - NB-IoT Soil Moisture & EC Sensor User Manual
Content
... ... @@ -1,11 +1,10 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20220709085040-1.png||height="542" width="524"]]
2 +[[image:image-20220606151504-2.jpeg||height="554" width="554"]]
3 3  
4 4  
5 5  
6 6  
7 7  
8 -**Table of Contents:**
9 9  
10 10  
11 11  
... ... @@ -12,23 +12,28 @@
12 12  
13 13  
14 14  
14 +**Table of Contents:**
15 15  
16 +
17 +
18 +
19 +
20 +
16 16  = 1.  Introduction =
17 17  
18 -== 1.1 ​ What is NDDS75 Distance Detection Sensor ==
23 +== 1.1 ​ What is LoRaWAN Soil Moisture & EC Sensor ==
19 19  
20 20  (((
21 21  
22 22  
23 -(((
24 -The Dragino NDDS75 is a (% style="color:blue" %)**NB-IoT Distance Detection Sensor**(%%) for Internet of Things solution. It is designed to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
25 -\\The NDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to IoT Server via NB-IoT Network.
26 -\\NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
27 -\\NDDS75 supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP** (%%)for different application requirement.
28 -\\NDDS75 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
29 -\\To use NDDS75, user needs to check if there is NB-IoT coverage in local area and with the bands NDDS75 supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install NDDS75 to get NB-IoT network connection.
30 -)))
28 +Dragino NSE01 is an (% style="color:blue" %)**NB-IOT soil moisture & EC sensor**(%%) for agricultural IoT. Used to measure the soil moisture of saline-alkali soil and loam. The soil sensor uses the FDR method to calculate soil moisture and compensates it with soil temperature and electrical conductivity. It has also been calibrated for mineral soil types at the factory.
31 31  
30 +It can detect (% style="color:blue" %)**Soil Moisture, Soil Temperature and Soil Conductivity**(%%), and upload its value to the server wirelessly.
31 +
32 +The wireless technology used in NSE01 allows the device to send data at a low data rate and reach ultra-long distances, providing ultra-long-distance spread spectrum Communication.
33 +
34 +NSE01 are powered by (% style="color:blue" %)**8500mAh Li-SOCI2**(%%) batteries, which can be used for up to 5 years.  
35 +
32 32  
33 33  )))
34 34  
... ... @@ -35,28 +35,26 @@
35 35  [[image:1654503236291-817.png]]
36 36  
37 37  
38 -[[image:1657327959271-447.png]]
42 +[[image:1657245163077-232.png]]
39 39  
40 40  
41 41  
42 -== 1.2 ​ Features ==
46 +== 1.2 ​Features ==
43 43  
44 44  
45 45  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
46 -* Ultra low power consumption
47 -* Distance Detection by Ultrasonic technology
48 -* Flat object range 280mm - 7500mm
49 -* Accuracy: ±(1cm+S*0.3%) (S: Distance)
50 -* Cable Length: 25cm
50 +* Monitor Soil Moisture
51 +* Monitor Soil Temperature
52 +* Monitor Soil Conductivity
51 51  * AT Commands to change parameters
52 52  * Uplink on periodically
53 53  * Downlink to change configure
54 54  * IP66 Waterproof Enclosure
57 +* Ultra-Low Power consumption
58 +* AT Commands to change parameters
55 55  * Micro SIM card slot for NB-IoT SIM
56 56  * 8500mAh Battery for long term use
57 57  
58 -
59 -
60 60  == 1.3  Specification ==
61 61  
62 62  
... ... @@ -74,65 +74,44 @@
74 74  * - B20 @H-FDD: 800MHz
75 75  * - B28 @H-FDD: 700MHz
76 76  
79 +(% style="color:#037691" %)**Probe Specification:**
77 77  
78 -(% style="color:#037691" %)**Battery:**
81 +Measure Volume: Base on the centra pin of the probe, a cylinder with 7cm diameter and 10cm height.
79 79  
80 -* Li/SOCI2 un-chargeable battery
81 -* Capacity: 8500mAh
82 -* Self Discharge: <1% / Year @ 25°C
83 -* Max continuously current: 130mA
84 -* Max boost current: 2A, 1 second
83 +[[image:image-20220708101224-1.png]]
85 85  
86 86  
87 -(% style="color:#037691" %)**Power Consumption**
88 88  
89 -* STOP Mode: 10uA @ 3.3v
90 -* Max transmit power: 350mA@3.3v
91 -
92 -
93 -
94 -
95 95  == ​1.4  Applications ==
96 96  
97 -* Smart Buildings & Home Automation
98 -* Logistics and Supply Chain Management
99 -* Smart Metering
100 100  * Smart Agriculture
101 -* Smart Cities
102 -* Smart Factory
103 103  
104 104  (% class="wikigeneratedid" id="H200B1.5FirmwareChangelog" %)
105 105  ​
106 106  
107 -
108 -
109 109  == 1.5  Pin Definitions ==
110 110  
111 111  
112 -[[image:1657328609906-564.png]]
97 +[[image:1657246476176-652.png]]
113 113  
114 114  
115 115  
116 -
117 117  = 2.  Use NSE01 to communicate with IoT Server =
118 118  
119 119  == 2.1  How it works ==
120 120  
105 +
121 121  (((
122 -The NDDS75 is equipped with a NB-IoT module, the pre-loaded firmware in NDDS75 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by NDDS75.
107 +The NSE01 is equipped with a NB-IoT module, the pre-loaded firmware in NSE01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by NSE01.
123 123  )))
124 124  
125 125  
126 126  (((
127 -The diagram below shows the working flow in default firmware of NDDS75:
112 +The diagram below shows the working flow in default firmware of NSE01:
128 128  )))
129 129  
130 -(((
131 -
132 -)))
115 +[[image:image-20220708101605-2.png]]
133 133  
134 -[[image:1657328659945-416.png]]
135 -
136 136  (((
137 137  
138 138  )))
... ... @@ -145,9 +145,7 @@
145 145  === 2.2.1 Test Requirement ===
146 146  
147 147  
148 -(((
149 149  To use NSE01 in your city, make sure meet below requirements:
150 -)))
151 151  
152 152  * Your local operator has already distributed a NB-IoT Network there.
153 153  * The local NB-IoT network used the band that NSE01 supports.
... ... @@ -164,13 +164,9 @@
164 164  
165 165  === 2.2.2 Insert SIM card ===
166 166  
167 -(((
168 168  Insert the NB-IoT Card get from your provider.
169 -)))
170 170  
171 -(((
172 172  User need to take out the NB-IoT module and insert the SIM card like below:
173 -)))
174 174  
175 175  
176 176  [[image:1657249468462-536.png]]
... ... @@ -209,9 +209,7 @@
209 209  
210 210  [[image:image-20220708110657-3.png]]
211 211  
212 -(((
213 213  (% style="color:red" %)Note: the valid AT Commands can be found at: (%%)[[http:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
214 -)))
215 215  
216 216  
217 217  
... ... @@ -314,14 +314,12 @@
314 314  In this mode, uplink payload includes in total 18 bytes
315 315  
316 316  (% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
317 -|=(% style="width: 60px;" %)(((
290 +|=(% style="width: 50px;" %)(((
318 318  **Size(bytes)**
319 -)))|=(% style="width: 50px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 60px;" %)**2**|=(% style="width: 80px;" %)**2**|=(% style="width: 90px;" %)**2**|=(% style="width: 50px;" %)**1**
320 -|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:108px" %)[[Soil Moisture>>||anchor="H2.4.5A0SoilMoisture"]]|(% style="width:133px" %)[[Soil Temperature>>||anchor="H2.4.6A0SoilTemperature"]]|(% style="width:159px" %)[[Soil Conductivity(EC)>>||anchor="H2.4.7A0SoilConductivity28EC29"]]|(% style="width:80px" %)[[Interrupt>>||anchor="H2.4.8A0DigitalInterrupt"]]
292 +)))|=(% style="width: 50px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 80px;" %)**1**|=(% style="width: 80px;" %)**2**|=(% style="width: 80px;" %)**2**|=(% style="width: 80px;" %)**2**|=(% style="width: 40px;" %)**1**
293 +|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H"]]|(% style="width:41px" %)[[Ver>>||anchor="H"]]|(% style="width:46px" %)[[BAT>>||anchor="H"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H"]]|(% style="width:108px" %)[[Soil Moisture>>||anchor="H"]]|(% style="width:133px" %)[[Soil Temperature>>||anchor="H"]]|(% style="width:159px" %)[[Soil Conductivity(EC)>>||anchor="H"]]|(% style="width:80px" %)[[Interrupt>>||anchor="H"]]
321 321  
322 -(((
323 323  If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NSE01 uplink data.
324 -)))
325 325  
326 326  
327 327  [[image:image-20220708111918-4.png]]
... ... @@ -346,37 +346,23 @@
346 346  
347 347  === 2.4.1  Device ID ===
348 348  
349 -(((
350 350  By default, the Device ID equal to the last 6 bytes of IMEI.
351 -)))
352 352  
353 -(((
354 354  User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID
355 -)))
356 356  
357 -(((
358 358  **Example:**
359 -)))
360 360  
361 -(((
362 362  AT+DEUI=A84041F15612
363 -)))
364 364  
365 -(((
366 366  The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
367 -)))
368 368  
369 369  
370 370  
371 371  === 2.4.2  Version Info ===
372 372  
373 -(((
374 374  Specify the software version: 0x64=100, means firmware version 1.00.
375 -)))
376 376  
377 -(((
378 378  For example: 0x00 64 : this device is NSE01 with firmware version 1.0.0.
379 -)))
380 380  
381 381  
382 382  
... ... @@ -398,33 +398,19 @@
398 398  
399 399  === 2.4.4  Signal Strength ===
400 400  
401 -(((
402 402  NB-IoT Network signal Strength.
403 -)))
404 404  
405 -(((
406 406  **Ex1: 0x1d = 29**
407 -)))
408 408  
409 -(((
410 410  (% style="color:blue" %)**0**(%%)  -113dBm or less
411 -)))
412 412  
413 -(((
414 414  (% style="color:blue" %)**1**(%%)  -111dBm
415 -)))
416 416  
417 -(((
418 418  (% style="color:blue" %)**2...30**(%%) -109dBm... -53dBm
419 -)))
420 420  
421 -(((
422 422  (% style="color:blue" %)**31**  (%%) -51dBm or greater
423 -)))
424 424  
425 -(((
426 426  (% style="color:blue" %)**99**   (%%) Not known or not detectable
427 -)))
428 428  
429 429  
430 430  
... ... @@ -431,16 +431,12 @@
431 431  === 2.4.5  Soil Moisture ===
432 432  
433 433  (((
434 -(((
435 435  Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
436 436  )))
437 -)))
438 438  
439 439  (((
440 -(((
441 441  For example, if the data you get from the register is **__0x05 0xDC__**, the moisture content in the soil is
442 442  )))
443 -)))
444 444  
445 445  (((
446 446  
... ... @@ -455,7 +455,7 @@
455 455  === 2.4.6  Soil Temperature ===
456 456  
457 457  (((
458 -Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is __**0x09 0xEC**__, the temperature content in the soil is
397 + Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is __**0x09 0xEC**__, the temperature content in the soil is
459 459  )))
460 460  
461 461  (((
... ... @@ -496,56 +496,34 @@
496 496  
497 497  === 2.4.8  Digital Interrupt ===
498 498  
499 -(((
500 500  Digital Interrupt refers to pin (% style="color:blue" %)**GPIO_EXTI**(%%), and there are different trigger methods. When there is a trigger, the NSE01 will send a packet to the server.
501 -)))
502 502  
503 -(((
504 504  The command is:
505 -)))
506 506  
507 -(((
508 508  (% style="color:blue" %)**AT+INTMOD=3 **(%%) ~/~/(more info about INMOD please refer [[**AT Command Manual**>>url:https://www.dragino.com/downloads/downloads/NB-IoT/NBSN95/DRAGINO_NBSN95-NB_AT%20Commands_v1.1.0.pdf]])**.**
509 -)))
510 510  
511 511  
512 -(((
513 -The lower four bits of this data field shows if this packet is generated by interrupt or not. Click here for the hardware and software set up.
514 -)))
445 +The lower four bits of this data field shows if this packet is generated by interrupt or not. [[Click here>>||anchor="H"]] for the hardware and software set up.
515 515  
516 516  
517 -(((
518 518  Example:
519 -)))
520 520  
521 -(((
522 522  0x(00): Normal uplink packet.
523 -)))
524 524  
525 -(((
526 526  0x(01): Interrupt Uplink Packet.
527 -)))
528 528  
529 529  
530 530  
531 531  === 2.4.9  ​+5V Output ===
532 532  
533 -(((
534 534  NSE01 will enable +5V output before all sampling and disable the +5v after all sampling. 
535 -)))
536 536  
537 537  
538 -(((
539 539  The 5V output time can be controlled by AT Command.
540 -)))
541 541  
542 -(((
543 543  (% style="color:blue" %)**AT+5VT=1000**
544 -)))
545 545  
546 -(((
547 547  Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
548 -)))
549 549  
550 550  
551 551  
... ... @@ -595,9 +595,7 @@
595 595  
596 596  * (% style="color:blue" %)**INTMOD**
597 597  
598 -(((
599 599  Downlink Payload: 06000003, Set AT+INTMOD=3
600 -)))
601 601  
602 602  
603 603  
... ... @@ -620,9 +620,7 @@
620 620  
621 621  __**Measurement the soil surface**__
622 622  
623 -(((
624 624  Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting. [[https:~~/~~/img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg>>url:https://img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg]]
625 -)))
626 626  
627 627  [[image:1657259653666-883.png]] ​
628 628  
... ... @@ -654,7 +654,7 @@
654 654  [[www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/Firmware/]]
655 655  
656 656  
657 -Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
570 +Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H"]]
658 658  
659 659  
660 660  
... ... @@ -663,22 +663,16 @@
663 663  === 2.9.1  ​Battery Type ===
664 664  
665 665  
666 -(((
667 667  The NSE01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
668 -)))
669 669  
670 670  
671 -(((
672 672  The battery is designed to last for several years depends on the actually use environment and update interval. 
673 -)))
674 674  
675 675  
676 -(((
677 677  The battery related documents as below:
678 -)))
679 679  
680 680  * [[Battery Dimension>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
681 -* [[Lithium-Thionyl Chloride Battery datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
588 +* [[Lithium-Thionyl Chloride Battery>>url:http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]][[ datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
682 682  * [[Lithium-ion Battery-Capacitor datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
683 683  
684 684  (((
... ... @@ -833,76 +833,155 @@
833 833  
834 834  
835 835  
836 -= ​5.  FAQ =
743 += ​4. FAQ =
837 837  
838 -== 5.1 ​ How to Upgrade Firmware ==
745 +== 4.1 ​How to change the LoRa Frequency Bands/Region? ==
839 839  
747 +(((
748 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
749 +When downloading the images, choose the required image file for download. ​
750 +)))
840 840  
841 841  (((
842 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
753 +
843 843  )))
844 844  
845 845  (((
846 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
757 +How to set up LSE01 to work in 8 channel mode By default, the frequency bands US915, AU915, CN470 work in 72 frequencies. Many gateways are 8 channel gateways, and in this case, the OTAA join time and uplink schedule is long and unpredictable while the end node is hopping in 72 frequencies.
847 847  )))
848 848  
849 849  (((
850 -(% style="color:red" %)Notice, NSE01 and LSE01 share the same mother board. They use the same connection and method to update.
761 +
851 851  )))
852 852  
764 +(((
765 +You can configure the end node to work in 8 channel mode by using the AT+CHE command. The 500kHz channels are always included for OTAA.
766 +)))
853 853  
768 +(((
769 +
770 +)))
854 854  
855 -== 5.2  Can I calibrate NSE01 to different soil types? ==
856 -
857 857  (((
858 -NSE01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
773 +For example, in **US915** band, the frequency table is as below. By default, the end node will use all channels (0~~71) for OTAA Join process. After the OTAA Join, the end node will use these all channels (0~~71) to send uplink packets.
859 859  )))
860 860  
776 +[[image:image-20220606154726-3.png]]
861 861  
862 -= 6.  Trouble Shooting =
863 863  
864 -== 6.1  ​Connection problem when uploading firmware ==
779 +When you use the TTN network, the US915 frequency bands use are:
865 865  
781 +* 903.9 - SF7BW125 to SF10BW125
782 +* 904.1 - SF7BW125 to SF10BW125
783 +* 904.3 - SF7BW125 to SF10BW125
784 +* 904.5 - SF7BW125 to SF10BW125
785 +* 904.7 - SF7BW125 to SF10BW125
786 +* 904.9 - SF7BW125 to SF10BW125
787 +* 905.1 - SF7BW125 to SF10BW125
788 +* 905.3 - SF7BW125 to SF10BW125
789 +* 904.6 - SF8BW500
866 866  
867 867  (((
868 -**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
792 +Because the end node is now hopping in 72 frequency, it makes it difficult for the devices to Join the TTN network and uplink data. To solve this issue, you can access the device via the AT commands and run:
793 +
794 +* (% style="color:#037691" %)**AT+CHE=2**
795 +* (% style="color:#037691" %)**ATZ**
869 869  )))
870 870  
871 -(% class="wikigeneratedid" %)
872 872  (((
873 873  
800 +
801 +to set the end node to work in 8 channel mode. The device will work in Channel 8-15 & 64-71 for OTAA, and channel 8-15 for Uplink.
874 874  )))
875 875  
804 +(((
805 +
806 +)))
876 876  
877 -== 6.2  AT Command input doesn't work ==
808 +(((
809 +The **AU915** band is similar. Below are the AU915 Uplink Channels.
810 +)))
878 878  
812 +[[image:image-20220606154825-4.png]]
813 +
814 +
815 +== 4.2 ​Can I calibrate LSE01 to different soil types? ==
816 +
817 +LSE01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/&file=Calibrate_to_other_Soil_20220605.pdf]].
818 +
819 +
820 += 5. Trouble Shooting =
821 +
822 +== 5.1 ​Why I can't join TTN in US915 / AU915 bands? ==
823 +
824 +It is due to channel mapping. Please see the [[Eight Channel Mode>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H7.19EightChannelMode"]] section above for details.
825 +
826 +
827 +== 5.2 AT Command input doesn't work ==
828 +
879 879  (((
880 880  In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
831 +)))
881 881  
882 -
833 +
834 +== 5.3 Device rejoin in at the second uplink packet ==
835 +
836 +(% style="color:#4f81bd" %)**Issue describe as below:**
837 +
838 +[[image:1654500909990-784.png]]
839 +
840 +
841 +(% style="color:#4f81bd" %)**Cause for this issue:**
842 +
843 +(((
844 +The fuse on LSE01 is not large enough, some of the soil probe require large current up to 5v 800mA, in a short pulse. When this happen, it cause the device reboot so user see rejoin.
883 883  )))
884 884  
885 885  
886 -= 7. ​ Order Info =
848 +(% style="color:#4f81bd" %)**Solution: **
887 887  
850 +All new shipped LSE01 after 2020-May-30 will have this to fix. For the customer who see this issue, please bypass the fuse as below:
888 888  
889 -Part Number**:** (% style="color:#4f81bd" %)**NSE01**
852 +[[image:1654500929571-736.png||height="458" width="832"]]
890 890  
891 891  
855 += 6. ​Order Info =
856 +
857 +
858 +Part Number**:** (% style="color:#4f81bd" %)**LSE01-XX-YY**
859 +
860 +
861 +(% style="color:#4f81bd" %)**XX**(%%)**:** The default frequency band
862 +
863 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
864 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
865 +* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
866 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
867 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
868 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
869 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
870 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
871 +
872 +(% style="color:#4f81bd" %)**YY**(%%)**: **Battery Option
873 +
874 +* (% style="color:red" %)**4**(%%): 4000mAh battery
875 +* (% style="color:red" %)**8**(%%): 8500mAh battery
876 +
892 892  (% class="wikigeneratedid" %)
893 893  (((
894 894  
895 895  )))
896 896  
897 -= 8.  Packing Info =
882 += 7. Packing Info =
898 898  
899 899  (((
900 900  
901 901  
902 902  (% style="color:#037691" %)**Package Includes**:
888 +)))
903 903  
904 -* NSE01 NB-IoT Soil Moisture & EC Sensor x 1
905 -* External antenna x 1
890 +* (((
891 +LSE01 LoRaWAN Soil Moisture & EC Sensor x 1
906 906  )))
907 907  
908 908  (((
... ... @@ -909,19 +909,24 @@
909 909  
910 910  
911 911  (% style="color:#037691" %)**Dimension and weight**:
898 +)))
912 912  
913 -* Size: 195 x 125 x 55 mm
914 -* Weight:   420g
900 +* (((
901 +Device Size: cm
915 915  )))
903 +* (((
904 +Device Weight: g
905 +)))
906 +* (((
907 +Package Size / pcs : cm
908 +)))
909 +* (((
910 +Weight / pcs : g
916 916  
917 -(((
918 918  
919 -
920 -
921 -
922 922  )))
923 923  
924 -= 9.  Support =
915 += 8. Support =
925 925  
926 926  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
927 927  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1657271519014-786.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -71.5 KB
Content
1657327959271-447.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -78.3 KB
Content
1657328609906-564.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -492.6 KB
Content
1657328659945-416.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -78.8 KB
Content
image-20220709084038-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -72.0 KB
Content
image-20220709084137-2.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -72.0 KB
Content
image-20220709084207-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -72.0 KB
Content
image-20220709084458-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -199.5 KB
Content
image-20220709085040-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -200.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0