Skip to Content
Last modified by Bei Jinggeng on 2024/05/31 09:53
From version 75.3
edited by Xiaoling
on 2022/07/09 08:58
Change comment: There is no comment for this version
To version 45.1
edited by Xiaoling
on 2022/07/08 10:16
Change comment: Uploaded new attachment "image-20220708101605-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDDS75 NB-IoT Distance Detect Sensor User Manual
1 +NSE01 - NB-IoT Soil Moisture & EC Sensor User Manual
Content
... ... @@ -1,11 +1,10 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20220709085040-1.png||height="542" width="524"]]
2 +[[image:image-20220606151504-2.jpeg||height="554" width="554"]]
3 3  
4 4  
5 5  
6 6  
7 7  
8 -**Table of Contents:**
9 9  
10 10  
11 11  
... ... @@ -12,23 +12,28 @@
12 12  
13 13  
14 14  
14 +**Table of Contents:**
15 15  
16 +
17 +
18 +
19 +
20 +
16 16  = 1.  Introduction =
17 17  
18 -== 1.1 ​ What is NDDS75 Distance Detection Sensor ==
23 +== 1.1 ​ What is LoRaWAN Soil Moisture & EC Sensor ==
19 19  
20 20  (((
21 21  
22 22  
23 -(((
24 -The Dragino NDDS75 is a (% style="color:blue" %)**NB-IoT Distance Detection Sensor**(%%) for Internet of Things solution. It is designed to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
25 -\\The NDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to IoT Server via NB-IoT Network.
26 -\\NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
27 -\\NDDS75 supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP** (%%)for different application requirement.
28 -\\NDDS75 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
29 -\\To use NDDS75, user needs to check if there is NB-IoT coverage in local area and with the bands NDDS75 supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install NDDS75 to get NB-IoT network connection.
30 -)))
28 +Dragino NSE01 is an (% style="color:blue" %)**NB-IOT soil moisture & EC sensor**(%%) for agricultural IoT. Used to measure the soil moisture of saline-alkali soil and loam. The soil sensor uses the FDR method to calculate soil moisture and compensates it with soil temperature and electrical conductivity. It has also been calibrated for mineral soil types at the factory.
31 31  
30 +It can detect (% style="color:blue" %)**Soil Moisture, Soil Temperature and Soil Conductivity**(%%), and upload its value to the server wirelessly.
31 +
32 +The wireless technology used in NSE01 allows the device to send data at a low data rate and reach ultra-long distances, providing ultra-long-distance spread spectrum Communication.
33 +
34 +NSE01 are powered by (% style="color:blue" %)**8500mAh Li-SOCI2**(%%) batteries, which can be used for up to 5 years.  
35 +
32 32  
33 33  )))
34 34  
... ... @@ -35,23 +35,23 @@
35 35  [[image:1654503236291-817.png]]
36 36  
37 37  
38 -[[image:1657327959271-447.png]]
42 +[[image:1657245163077-232.png]]
39 39  
40 40  
41 41  
42 -== 1.2 ​ Features ==
46 +== 1.2 ​Features ==
43 43  
44 44  
45 45  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
46 -* Ultra low power consumption
47 -* Distance Detection by Ultrasonic technology
48 -* Flat object range 280mm - 7500mm
49 -* Accuracy: ±(1cm+S*0.3%) (S: Distance)
50 -* Cable Length: 25cm
50 +* Monitor Soil Moisture
51 +* Monitor Soil Temperature
52 +* Monitor Soil Conductivity
51 51  * AT Commands to change parameters
52 52  * Uplink on periodically
53 53  * Downlink to change configure
54 54  * IP66 Waterproof Enclosure
57 +* Ultra-Low Power consumption
58 +* AT Commands to change parameters
55 55  * Micro SIM card slot for NB-IoT SIM
56 56  * 8500mAh Battery for long term use
57 57  
... ... @@ -65,6 +65,7 @@
65 65  * Supply Voltage: 2.1v ~~ 3.6v
66 66  * Operating Temperature: -40 ~~ 85°C
67 67  
72 +
68 68  (% style="color:#037691" %)**NB-IoT Spec:**
69 69  
70 70  * - B1 @H-FDD: 2100MHz
... ... @@ -75,23 +75,14 @@
75 75  * - B28 @H-FDD: 700MHz
76 76  
77 77  
78 -(% style="color:#037691" %)**Battery:**
83 +(% style="color:#037691" %)**Probe Specification:**
79 79  
80 -* Li/SOCI2 un-chargeable battery
81 -* Capacity: 8500mAh
82 -* Self Discharge: <1% / Year @ 25°C
83 -* Max continuously current: 130mA
84 -* Max boost current: 2A, 1 second
85 +Measure Volume: Base on the centra pin of the probe, a cylinder with 7cm diameter and 10cm height.
85 85  
87 +[[image:image-20220708101224-1.png]]
86 86  
87 -(% style="color:#037691" %)**Power Consumption**
88 88  
89 -* STOP Mode: 10uA @ 3.3v
90 -* Max transmit power: 350mA@3.3v
91 91  
92 -
93 -
94 -
95 95  == ​1.4  Applications ==
96 96  
97 97  * Smart Agriculture
... ... @@ -106,616 +106,696 @@
106 106  
107 107  
108 108  
109 -= 2.  Use NSE01 to communicate with IoT Server =
105 += 2. Configure LSE01 to connect to LoRaWAN network =
110 110  
111 -== 2.1  How it works ==
107 +== 2.1 How it works ==
112 112  
113 -
114 114  (((
115 -The NSE01 is equipped with a NB-IoT module, the pre-loaded firmware in NSE01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by NSE01.
110 +The LSE01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSE0150. It will automatically join the network via OTAA and start to send the sensor value
116 116  )))
117 117  
118 -
119 119  (((
120 -The diagram below shows the working flow in default firmware of NSE01:
114 +In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.200BUsingtheATCommands"]].
121 121  )))
122 122  
123 -[[image:image-20220708101605-2.png]]
124 124  
125 -(((
126 -
127 -)))
128 128  
119 +== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
129 129  
121 +Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.
130 130  
131 -== 2.2 ​ Configure the NSE01 ==
132 132  
124 +[[image:1654503992078-669.png]]
133 133  
134 -=== 2.2.1 Test Requirement ===
135 135  
127 +The LG308 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
136 136  
137 -(((
138 -To use NSE01 in your city, make sure meet below requirements:
139 -)))
140 140  
141 -* Your local operator has already distributed a NB-IoT Network there.
142 -* The local NB-IoT network used the band that NSE01 supports.
143 -* Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
130 +(% style="color:blue" %)**Step 1**(%%):  Create a device in TTN with the OTAA keys from LSE01.
144 144  
145 -(((
146 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NSE01 will use CoAP((% style="color:red" %)120.24.4.116:5683)(%%) or raw UDP((% style="color:red" %)120.24.4.116:5601)(%%) or MQTT((% style="color:red" %)120.24.4.116:1883)(%%)or TCP((% style="color:red" %)120.24.4.116:5600)(%%)protocol to send data to the test server
147 -)))
132 +Each LSE01 is shipped with a sticker with the default device EUI as below:
148 148  
134 +[[image:image-20220606163732-6.jpeg]]
149 149  
150 -[[image:1657249419225-449.png]]
136 +You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
151 151  
138 +**Add APP EUI in the application**
152 152  
153 153  
154 -=== 2.2.2 Insert SIM card ===
141 +[[image:1654504596150-405.png]]
155 155  
156 -(((
157 -Insert the NB-IoT Card get from your provider.
158 -)))
159 159  
160 -(((
161 -User need to take out the NB-IoT module and insert the SIM card like below:
162 -)))
163 163  
145 +**Add APP KEY and DEV EUI**
164 164  
165 -[[image:1657249468462-536.png]]
147 +[[image:1654504683289-357.png]]
166 166  
167 167  
168 168  
169 -=== 2.2.3 Connect USB – TTL to NSE01 to configure it ===
151 +(% style="color:blue" %)**Step 2**(%%): Power on LSE01
170 170  
171 -(((
172 -(((
173 -User need to configure NSE01 via serial port to set the (% style="color:blue" %)**Server Address** / **Uplink Topic** (%%)to define where and how-to uplink packets. NSE01 support AT Commands, user can use a USB to TTL adapter to connect to NSE01 and use AT Commands to configure it, as below.
174 -)))
175 -)))
176 176  
154 +Put a Jumper on JP2 to power on the device. ( The Jumper must be in FLASH position).
177 177  
178 -**Connection:**
156 +[[image:image-20220606163915-7.png]]
179 179  
180 - (% style="background-color:yellow" %)USB TTL GND <~-~-~-~-> GND
181 181  
182 - (% style="background-color:yellow" %)USB TTL TXD <~-~-~-~-> UART_RXD
159 +(% style="color:blue" %)**Step 3**(%%)**:** The LSE01 will auto join to the TTN network. After join success, it will start to upload messages to TTN and you can see the messages in the panel.
183 183  
184 - (% style="background-color:yellow" %)USB TTL RXD <~-~-~-~-> UART_TXD
161 +[[image:1654504778294-788.png]]
185 185  
186 186  
187 -In the PC, use below serial tool settings:
188 188  
189 -* Baud:  (% style="color:green" %)**9600**
190 -* Data bits:** (% style="color:green" %)8(%%)**
191 -* Stop bits: (% style="color:green" %)**1**
192 -* Parity:  (% style="color:green" %)**None**
193 -* Flow Control: (% style="color:green" %)**None**
165 +== 2.3 Uplink Payload ==
194 194  
195 -(((
196 -Make sure the switch is in FLASH position, then power on device by connecting the jumper on NSE01. NSE01 will output system info once power on as below, we can enter the (% style="color:green" %)**password: 12345678**(%%) to access AT Command input.
197 -)))
198 198  
199 -[[image:image-20220708110657-3.png]]
168 +=== 2.3.1 MOD~=0(Default Mode) ===
200 200  
170 +LSE01 will uplink payload via LoRaWAN with below payload format: 
171 +
201 201  (((
202 -(% style="color:red" %)Note: the valid AT Commands can be found at: (%%)[[http:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
173 +Uplink payload includes in total 11 bytes.
203 203  )))
204 204  
176 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)
177 +|(((
178 +**Size**
205 205  
180 +**(bytes)**
181 +)))|**2**|**2**|**2**|**2**|**2**|**1**
182 +|**Value**|[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(((
183 +Temperature
206 206  
207 -=== 2.2.4 Use CoAP protocol to uplink data ===
185 +(Reserve, Ignore now)
186 +)))|[[Soil Moisture>>||anchor="H2.3.4SoilMoisture"]]|[[Soil Temperature>>||anchor="H2.3.5SoilTemperature"]]|[[Soil Conductivity (EC)>>||anchor="H2.3.6SoilConductivity28EC29"]]|(((
187 +MOD & Digital Interrupt
208 208  
209 -(% style="color:red" %)Note: if you don't have CoAP server, you can refer this link to set up one: (%%)[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
189 +(Optional)
190 +)))
210 210  
192 +=== 2.3.2 MOD~=1(Original value) ===
211 211  
212 -**Use below commands:**
194 +This mode can get the original AD value of moisture and original conductivity (with temperature drift compensation).
213 213  
214 -* (% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
215 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
216 -* (% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
196 +(% border="1" cellspacing="10" style="background-color:#ffffcc; width:500px" %)
197 +|(((
198 +**Size**
217 217  
218 -For parameter description, please refer to AT command set
200 +**(bytes)**
201 +)))|**2**|**2**|**2**|**2**|**2**|**1**
202 +|**Value**|[[BAT>>||anchor="H2.3.3BatteryInfo"]]|(((
203 +Temperature
219 219  
220 -[[image:1657249793983-486.png]]
205 +(Reserve, Ignore now)
206 +)))|[[Soil Moisture>>||anchor="H2.3.4SoilMoisture"]](raw)|[[Soil Temperature>>||anchor="H2.3.5SoilTemperature"]]|[[Soil Conductivity (EC)>>||anchor="H2.3.6SoilConductivity28EC29"]](raw)|(((
207 +MOD & Digital Interrupt
221 221  
209 +(Optional)
210 +)))
222 222  
223 -After configure the server address and (% style="color:green" %)**reset the device**(%%) (via AT+ATZ ), NSE01 will start to uplink sensor values to CoAP server.
212 +=== 2.3.3 Battery Info ===
224 224  
225 -[[image:1657249831934-534.png]]
214 +(((
215 +Check the battery voltage for LSE01.
216 +)))
226 226  
218 +(((
219 +Ex1: 0x0B45 = 2885mV
220 +)))
227 227  
222 +(((
223 +Ex2: 0x0B49 = 2889mV
224 +)))
228 228  
229 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
230 230  
231 -This feature is supported since firmware version v1.0.1
232 232  
228 +=== 2.3.4 Soil Moisture ===
233 233  
234 -* (% style="color:blue" %)**AT+PRO=2   ** (%%) ~/~/ Set to use UDP protocol to uplink
235 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/ to set UDP server address and port
236 -* (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/If the server does not respond, this command is unnecessary
230 +(((
231 +Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
232 +)))
237 237  
238 -[[image:1657249864775-321.png]]
234 +(((
235 +For example, if the data you get from the register is __0x05 0xDC__, the moisture content in the soil is
236 +)))
239 239  
238 +(((
239 +
240 +)))
240 240  
241 -[[image:1657249930215-289.png]]
242 +(((
243 +(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
244 +)))
242 242  
243 243  
244 244  
245 -=== 2.2.6 Use MQTT protocol to uplink data ===
248 +=== 2.3.5 Soil Temperature ===
246 246  
247 -This feature is supported since firmware version v110
250 +(((
251 + Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is 0x09 0xEC, the temperature content in the soil is
252 +)))
248 248  
254 +(((
255 +**Example**:
256 +)))
249 249  
250 -* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
251 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
252 -* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
253 -* (% style="color:blue" %)**AT+UNAME=UNAME                               **(%%)~/~/Set the username of MQTT
254 -* (% style="color:blue" %)**AT+PWD=PWD                                        **(%%)~/~/Set the password of MQTT
255 -* (% style="color:blue" %)**AT+PUBTOPIC=NSE01_PUB                    **(%%)~/~/Set the sending topic of MQTT
256 -* (% style="color:blue" %)**AT+SUBTOPIC=NSE01_SUB          **(%%) ~/~/Set the subscription topic of MQTT
258 +(((
259 +If payload is 0105H: ((0x0105 & 0x8000)>>15 === 0),temp = 0105(H)/100 = 2.61 °C
260 +)))
257 257  
258 -[[image:1657249978444-674.png]]
262 +(((
263 +If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/100 = -1.29 °C
264 +)))
259 259  
260 260  
261 -[[image:1657249990869-686.png]]
262 262  
268 +=== 2.3.6 Soil Conductivity (EC) ===
263 263  
264 264  (((
265 -MQTT protocol has a much higher power consumption compare vs UDP / CoAP protocol. Please check the power analyze document and adjust the uplink period to a suitable interval.
271 +Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
266 266  )))
267 267  
274 +(((
275 +For example, if the data you get from the register is 0x00 0xC8, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
276 +)))
268 268  
278 +(((
279 +Generally, the EC value of irrigation water is less than 800uS / cm.
280 +)))
269 269  
270 -=== 2.2.7 Use TCP protocol to uplink data ===
282 +(((
283 +
284 +)))
271 271  
272 -This feature is supported since firmware version v110
286 +(((
287 +
288 +)))
273 273  
290 +=== 2.3.7 MOD ===
274 274  
275 -* (% style="color:blue" %)**AT+PRO=4   ** (%%) ~/~/ Set to use TCP protocol to uplink
276 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5600   **(%%) ~/~/ to set TCP server address and port
292 +Firmware version at least v2.1 supports changing mode.
277 277  
278 -[[image:1657250217799-140.png]]
294 +For example, bytes[10]=90
279 279  
296 +mod=(bytes[10]>>7)&0x01=1.
280 280  
281 -[[image:1657250255956-604.png]]
282 282  
299 +**Downlink Command:**
283 283  
301 +If payload = 0x0A00, workmode=0
284 284  
285 -=== 2.2.8 Change Update Interval ===
303 +If** **payload =** **0x0A01, workmode=1
286 286  
287 -User can use below command to change the (% style="color:green" %)**uplink interval**.
288 288  
289 -* (% style="color:blue" %)**AT+TDC=600      ** (%%)~/~/ Set Update Interval to 600s
290 290  
291 -(((
292 -(% style="color:red" %)**NOTE:**
293 -)))
307 +=== 2.3.8 ​Decode payload in The Things Network ===
294 294  
295 -(((
296 -(% style="color:red" %)1. By default, the device will send an uplink message every 1 hour.
297 -)))
309 +While using TTN network, you can add the payload format to decode the payload.
298 298  
299 299  
312 +[[image:1654505570700-128.png]]
300 300  
301 -== 2.3  Uplink Payload ==
314 +(((
315 +The payload decoder function for TTN is here:
316 +)))
302 302  
303 -In this mode, uplink payload includes in total 18 bytes
304 -
305 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
306 -|=(% style="width: 60px;" %)(((
307 -**Size(bytes)**
308 -)))|=(% style="width: 50px;" %)**6**|=(% style="width: 25px;" %)2|=(% style="width: 25px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 60px;" %)**2**|=(% style="width: 80px;" %)**2**|=(% style="width: 90px;" %)**2**|=(% style="width: 50px;" %)**1**
309 -|(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:108px" %)[[Soil Moisture>>||anchor="H2.4.5A0SoilMoisture"]]|(% style="width:133px" %)[[Soil Temperature>>||anchor="H2.4.6A0SoilTemperature"]]|(% style="width:159px" %)[[Soil Conductivity(EC)>>||anchor="H2.4.7A0SoilConductivity28EC29"]]|(% style="width:80px" %)[[Interrupt>>||anchor="H2.4.8A0DigitalInterrupt"]]
310 -
311 311  (((
312 -If we use the MQTT client to subscribe to this MQTT topic, we can see the following information when the NSE01 uplink data.
319 +LSE01 TTN Payload Decoder: [[https:~~/~~/www.dropbox.com/sh/si8icbrjlamxqdb/AAACYwjsxxr5fj_vpqRtrETAa?dl=0>>https://www.dropbox.com/sh/si8icbrjlamxqdb/AAACYwjsxxr5fj_vpqRtrETAa?dl=0]]
313 313  )))
314 314  
315 315  
316 -[[image:image-20220708111918-4.png]]
323 +== 2.4 Uplink Interval ==
317 317  
325 +The LSE01 by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link: [[Change Uplink Interval>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H4.1ChangeUplinkInterval"]]
318 318  
319 -The payload is ASCII string, representative same HEX:
320 320  
321 -0x72403155615900640c7817075e0a8c02f900 where:
322 322  
323 -* Device ID: 0x 724031556159 = 724031556159
324 -* Version: 0x0064=100=1.0.0
329 +== 2.5 Downlink Payload ==
325 325  
326 -* BAT: 0x0c78 = 3192 mV = 3.192V
327 -* Singal: 0x17 = 23
328 -* Soil Moisture: 0x075e= 1886 = 18.86  %
329 -* Soil Temperature:0x0a8c =2700=27 °C
330 -* Soil Conductivity(EC) = 0x02f9 =761 uS /cm
331 -* Interrupt: 0x00 = 0
331 +By default, LSE50 prints the downlink payload to console port.
332 332  
333 -== 2.4  Payload Explanation and Sensor Interface ==
333 +[[image:image-20220606165544-8.png]]
334 334  
335 335  
336 -=== 2.4.1  Device ID ===
337 -
338 338  (((
339 -By default, the Device ID equal to the last 6 bytes of IMEI.
337 +(% style="color:blue" %)**Examples:**
340 340  )))
341 341  
342 342  (((
343 -User can use (% style="color:blue" %)**AT+DEUI**(%%) to set Device ID
341 +
344 344  )))
345 345  
346 -(((
347 -**Example:**
344 +* (((
345 +(% style="color:blue" %)**Set TDC**
348 348  )))
349 349  
350 350  (((
351 -AT+DEUI=A84041F15612
349 +If the payload=0100003C, it means set the END Node’s TDC to 0x00003C=60(S), while type code is 01.
352 352  )))
353 353  
354 354  (((
355 -The Device ID is stored in a none-erase area, Upgrade the firmware or run AT+FDR won't erase Device ID.
353 +Payload:    01 00 00 1E    TDC=30S
356 356  )))
357 357  
358 -
359 -
360 -=== 2.4.2  Version Info ===
361 -
362 362  (((
363 -Specify the software version: 0x64=100, means firmware version 1.00.
357 +Payload:    01 00 00 3C    TDC=60S
364 364  )))
365 365  
366 366  (((
367 -For example: 0x00 64 : this device is NSE01 with firmware version 1.0.0.
361 +
368 368  )))
369 369  
370 -
371 -
372 -=== 2.4.3  Battery Info ===
373 -
374 -(((
375 -Check the battery voltage for LSE01.
364 +* (((
365 +(% style="color:blue" %)**Reset**
376 376  )))
377 377  
378 378  (((
379 -Ex1: 0x0B45 = 2885mV
369 +If payload = 0x04FF, it will reset the LSE01
380 380  )))
381 381  
382 -(((
383 -Ex2: 0x0B49 = 2889mV
384 -)))
385 385  
373 +* (% style="color:blue" %)**CFM**
386 386  
375 +Downlink Payload: 05000001, Set AT+CFM=1 or 05000000 , set AT+CFM=0
387 387  
388 -=== 2.4.4  Signal Strength ===
389 389  
390 -(((
391 -NB-IoT Network signal Strength.
392 -)))
393 393  
394 -(((
395 -**Ex1: 0x1d = 29**
396 -)))
379 +== 2.6 ​Show Data in DataCake IoT Server ==
397 397  
398 398  (((
399 -(% style="color:blue" %)**0**(%%)  -113dBm or less
382 +[[DATACAKE>>url:https://datacake.co/]] provides a human friendly interface to show the sensor data, once we have data in TTN, we can use [[DATACAKE>>url:https://datacake.co/]] to connect to TTN and see the data in DATACAKE. Below are the steps:
400 400  )))
401 401  
402 402  (((
403 -(% style="color:blue" %)**1**(%%)  -111dBm
386 +
404 404  )))
405 405  
406 406  (((
407 -(% style="color:blue" %)**2...30**(%%) -109dBm... -53dBm
390 +(% style="color:blue" %)**Step 1**(%%):  Be sure that your device is programmed and properly connected to the network at this time.
408 408  )))
409 409  
410 410  (((
411 -(% style="color:blue" %)**31**  (%%) -51dBm or greater
394 +(% style="color:blue" %)**Step 2**(%%):  To configure the Application to forward data to DATACAKE you will need to add integration. To add the DATACAKE integration, perform the following steps:
412 412  )))
413 413  
414 -(((
415 -(% style="color:blue" %)**99**   (%%) Not known or not detectable
416 -)))
417 417  
398 +[[image:1654505857935-743.png]]
418 418  
419 419  
420 -=== 2.4.5  Soil Moisture ===
401 +[[image:1654505874829-548.png]]
421 421  
422 -(((
423 -(((
424 -Get the moisture content of the soil. The value range of the register is 0-10000(Decimal), divide this value by 100 to get the percentage of moisture in the soil.
425 -)))
426 -)))
427 427  
428 -(((
429 -(((
430 -For example, if the data you get from the register is **__0x05 0xDC__**, the moisture content in the soil is
431 -)))
432 -)))
404 +(% style="color:blue" %)**Step 3**(%%)**:**  Create an account or log in Datacake.
433 433  
434 -(((
435 -
436 -)))
406 +(% style="color:blue" %)**Step 4**(%%)**:**  Search the LSE01 and add DevEUI.
437 437  
438 -(((
439 -(% style="color:#4f81bd" %)**05DC(H) = 1500(D) /100 = 15%.**
440 -)))
441 441  
409 +[[image:1654505905236-553.png]]
442 442  
443 443  
444 -=== 2.4.6  Soil Temperature ===
412 +After added, the sensor data arrive TTN, it will also arrive and show in Mydevices.
445 445  
446 -(((
447 -Get the temperature in the soil. The value range of the register is -4000 - +800(Decimal), divide this value by 100 to get the temperature in the soil. For example, if the data you get from the register is __**0x09 0xEC**__, the temperature content in the soil is
448 -)))
414 +[[image:1654505925508-181.png]]
449 449  
450 -(((
451 -**Example**:
452 -)))
453 453  
454 -(((
455 -If payload is 0105H: ((0x0105 & 0x8000)>>15 === 0),temp = 0105(H)/100 = 2.61 °C
456 -)))
457 457  
458 -(((
459 -If payload is FF7EH: ((FF7E & 0x8000)>>15 ===1),temp = (FF7E(H)-FFFF(H))/100 = -1.29 °C
460 -)))
418 +== 2.7 Frequency Plans ==
461 461  
420 +The LSE01 uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
462 462  
463 463  
464 -=== 2.4.7  Soil Conductivity (EC) ===
423 +=== 2.7.1 EU863-870 (EU868) ===
465 465  
466 -(((
467 -Obtain (% style="color:#4f81bd" %)**__soluble salt concentration__**(%%) in soil or (% style="color:#4f81bd" %)**__soluble ion concentration in liquid fertilizer__**(%%) or (% style="color:#4f81bd" %)**__planting medium__**(%%). The value range of the register is 0 - 20000(Decimal)( Can be greater than 20000).
468 -)))
425 +(% style="color:#037691" %)** Uplink:**
469 469  
470 -(((
471 -For example, if the data you get from the register is __**0x00 0xC8**__, the soil conductivity is 00C8(H) = 200(D) = 200 uS/cm.
472 -)))
427 +868.1 - SF7BW125 to SF12BW125
473 473  
474 -(((
475 -Generally, the EC value of irrigation water is less than 800uS / cm.
476 -)))
429 +868.3 - SF7BW125 to SF12BW125 and SF7BW250
477 477  
478 -(((
479 -
480 -)))
431 +868.5 - SF7BW125 to SF12BW125
481 481  
482 -(((
483 -
484 -)))
433 +867.1 - SF7BW125 to SF12BW125
485 485  
486 -=== 2.4.8  Digital Interrupt ===
435 +867.3 - SF7BW125 to SF12BW125
487 487  
488 -(((
489 -Digital Interrupt refers to pin (% style="color:blue" %)**GPIO_EXTI**(%%), and there are different trigger methods. When there is a trigger, the NSE01 will send a packet to the server.
490 -)))
437 +867.5 - SF7BW125 to SF12BW125
491 491  
492 -(((
493 -The command is:
494 -)))
439 +867.7 - SF7BW125 to SF12BW125
495 495  
496 -(((
497 -(% style="color:blue" %)**AT+INTMOD=3 **(%%) ~/~/(more info about INMOD please refer [[**AT Command Manual**>>url:https://www.dragino.com/downloads/downloads/NB-IoT/NBSN95/DRAGINO_NBSN95-NB_AT%20Commands_v1.1.0.pdf]])**.**
498 -)))
441 +867.9 - SF7BW125 to SF12BW125
499 499  
443 +868.8 - FSK
500 500  
501 -(((
502 -The lower four bits of this data field shows if this packet is generated by interrupt or not. Click here for the hardware and software set up.
503 -)))
504 504  
446 +(% style="color:#037691" %)** Downlink:**
505 505  
506 -(((
507 -Example:
508 -)))
448 +Uplink channels 1-9 (RX1)
509 509  
510 -(((
511 -0x(00): Normal uplink packet.
512 -)))
450 +869.525 - SF9BW125 (RX2 downlink only)
513 513  
514 -(((
515 -0x(01): Interrupt Uplink Packet.
516 -)))
517 517  
518 518  
454 +=== 2.7.2 US902-928(US915) ===
519 519  
520 -=== 2.4.9  ​+5V Output ===
456 +Used in USA, Canada and South America. Default use CHE=2
521 521  
522 -(((
523 -NSE01 will enable +5V output before all sampling and disable the +5v after all sampling. 
524 -)))
458 +(% style="color:#037691" %)**Uplink:**
525 525  
460 +903.9 - SF7BW125 to SF10BW125
526 526  
527 -(((
528 -The 5V output time can be controlled by AT Command.
529 -)))
462 +904.1 - SF7BW125 to SF10BW125
530 530  
531 -(((
532 -(% style="color:blue" %)**AT+5VT=1000**
533 -)))
464 +904.3 - SF7BW125 to SF10BW125
534 534  
535 -(((
536 -Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
537 -)))
466 +904.5 - SF7BW125 to SF10BW125
538 538  
468 +904.7 - SF7BW125 to SF10BW125
539 539  
470 +904.9 - SF7BW125 to SF10BW125
540 540  
541 -== 2.5  Downlink Payload ==
472 +905.1 - SF7BW125 to SF10BW125
542 542  
543 -By default, NSE01 prints the downlink payload to console port.
474 +905.3 - SF7BW125 to SF10BW125
544 544  
545 -[[image:image-20220708133731-5.png]]
546 546  
477 +(% style="color:#037691" %)**Downlink:**
547 547  
548 -(((
549 -(% style="color:blue" %)**Examples:**
550 -)))
479 +923.3 - SF7BW500 to SF12BW500
551 551  
552 -(((
553 -
554 -)))
481 +923.9 - SF7BW500 to SF12BW500
555 555  
556 -* (((
557 -(% style="color:blue" %)**Set TDC**
558 -)))
483 +924.5 - SF7BW500 to SF12BW500
559 559  
560 -(((
561 -If the payload=0100003C, it means set the END Node's TDC to 0x00003C=60(S), while type code is 01.
562 -)))
485 +925.1 - SF7BW500 to SF12BW500
563 563  
564 -(((
565 -Payload:    01 00 00 1E    TDC=30S
566 -)))
487 +925.7 - SF7BW500 to SF12BW500
567 567  
568 -(((
569 -Payload:    01 00 00 3C    TDC=60S
570 -)))
489 +926.3 - SF7BW500 to SF12BW500
571 571  
572 -(((
573 -
574 -)))
491 +926.9 - SF7BW500 to SF12BW500
575 575  
576 -* (((
577 -(% style="color:blue" %)**Reset**
578 -)))
493 +927.5 - SF7BW500 to SF12BW500
579 579  
580 -(((
581 -If payload = 0x04FF, it will reset the NSE01
582 -)))
495 +923.3 - SF12BW500(RX2 downlink only)
583 583  
584 584  
585 -* (% style="color:blue" %)**INTMOD**
586 586  
587 -(((
588 -Downlink Payload: 06000003, Set AT+INTMOD=3
589 -)))
499 +=== 2.7.3 CN470-510 (CN470) ===
590 590  
501 +Used in China, Default use CHE=1
591 591  
503 +(% style="color:#037691" %)**Uplink:**
592 592  
593 -== 2.6  ​LED Indicator ==
505 +486.3 - SF7BW125 to SF12BW125
594 594  
595 -(((
596 -The NSE01 has an internal LED which is to show the status of different state.
507 +486.5 - SF7BW125 to SF12BW125
597 597  
509 +486.7 - SF7BW125 to SF12BW125
598 598  
599 -* When power on, NSE01 will detect if sensor probe is connected, if probe detected, LED will blink four times. (no blinks in this step is no probe)
600 -* Then the LED will be on for 1 second means device is boot normally.
601 -* After NSE01 join NB-IoT network. The LED will be ON for 3 seconds.
602 -* For each uplink probe, LED will be on for 500ms.
603 -)))
511 +486.9 - SF7BW125 to SF12BW125
604 604  
513 +487.1 - SF7BW125 to SF12BW125
605 605  
515 +487.3 - SF7BW125 to SF12BW125
606 606  
517 +487.5 - SF7BW125 to SF12BW125
607 607  
608 -== 2.7  Installation in Soil ==
519 +487.7 - SF7BW125 to SF12BW125
609 609  
610 -__**Measurement the soil surface**__
611 611  
612 -(((
613 -Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting. [[https:~~/~~/img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg>>url:https://img.alicdn.com/imgextra/i3/2005165265/O1CN010rj9Oh1olPsQxrdUK_!!2005165265.jpg]]
614 -)))
522 +(% style="color:#037691" %)**Downlink:**
615 615  
616 -[[image:1657259653666-883.png]] ​
524 +506.7 - SF7BW125 to SF12BW125
617 617  
526 +506.9 - SF7BW125 to SF12BW125
618 618  
619 -(((
620 -
528 +507.1 - SF7BW125 to SF12BW125
621 621  
622 -(((
623 -Dig a hole with diameter > 20CM.
624 -)))
530 +507.3 - SF7BW125 to SF12BW125
625 625  
626 -(((
627 -Horizontal insert the probe to the soil and fill the hole for long term measurement.
628 -)))
629 -)))
532 +507.5 - SF7BW125 to SF12BW125
630 630  
631 -[[image:1654506665940-119.png]]
534 +507.7 - SF7BW125 to SF12BW125
632 632  
633 -(((
634 -
635 -)))
536 +507.9 - SF7BW125 to SF12BW125
636 636  
538 +508.1 - SF7BW125 to SF12BW125
637 637  
638 -== 2.8  ​Firmware Change Log ==
540 +505.3 - SF12BW125 (RX2 downlink only)
639 639  
640 640  
641 -Download URL & Firmware Change log
642 642  
643 -[[www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/Firmware/]]
544 +=== 2.7.4 AU915-928(AU915) ===
644 644  
546 +Default use CHE=2
645 645  
646 -Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
548 +(% style="color:#037691" %)**Uplink:**
647 647  
550 +916.8 - SF7BW125 to SF12BW125
648 648  
552 +917.0 - SF7BW125 to SF12BW125
649 649  
650 -== 2.9  ​Battery Analysis ==
554 +917.2 - SF7BW125 to SF12BW125
651 651  
652 -=== 2.9.1  ​Battery Type ===
556 +917.4 - SF7BW125 to SF12BW125
653 653  
558 +917.6 - SF7BW125 to SF12BW125
654 654  
560 +917.8 - SF7BW125 to SF12BW125
561 +
562 +918.0 - SF7BW125 to SF12BW125
563 +
564 +918.2 - SF7BW125 to SF12BW125
565 +
566 +
567 +(% style="color:#037691" %)**Downlink:**
568 +
569 +923.3 - SF7BW500 to SF12BW500
570 +
571 +923.9 - SF7BW500 to SF12BW500
572 +
573 +924.5 - SF7BW500 to SF12BW500
574 +
575 +925.1 - SF7BW500 to SF12BW500
576 +
577 +925.7 - SF7BW500 to SF12BW500
578 +
579 +926.3 - SF7BW500 to SF12BW500
580 +
581 +926.9 - SF7BW500 to SF12BW500
582 +
583 +927.5 - SF7BW500 to SF12BW500
584 +
585 +923.3 - SF12BW500(RX2 downlink only)
586 +
587 +
588 +
589 +=== 2.7.5 AS920-923 & AS923-925 (AS923) ===
590 +
591 +(% style="color:#037691" %)**Default Uplink channel:**
592 +
593 +923.2 - SF7BW125 to SF10BW125
594 +
595 +923.4 - SF7BW125 to SF10BW125
596 +
597 +
598 +(% style="color:#037691" %)**Additional Uplink Channel**:
599 +
600 +(OTAA mode, channel added by JoinAccept message)
601 +
602 +(% style="color:#037691" %)**AS920~~AS923 for Japan, Malaysia, Singapore**:
603 +
604 +922.2 - SF7BW125 to SF10BW125
605 +
606 +922.4 - SF7BW125 to SF10BW125
607 +
608 +922.6 - SF7BW125 to SF10BW125
609 +
610 +922.8 - SF7BW125 to SF10BW125
611 +
612 +923.0 - SF7BW125 to SF10BW125
613 +
614 +922.0 - SF7BW125 to SF10BW125
615 +
616 +
617 +(% style="color:#037691" %)**AS923 ~~ AS925 for Brunei, Cambodia, Hong Kong, Indonesia, Laos, Taiwan, Thailand, Vietnam**:
618 +
619 +923.6 - SF7BW125 to SF10BW125
620 +
621 +923.8 - SF7BW125 to SF10BW125
622 +
623 +924.0 - SF7BW125 to SF10BW125
624 +
625 +924.2 - SF7BW125 to SF10BW125
626 +
627 +924.4 - SF7BW125 to SF10BW125
628 +
629 +924.6 - SF7BW125 to SF10BW125
630 +
631 +
632 +(% style="color:#037691" %)** Downlink:**
633 +
634 +Uplink channels 1-8 (RX1)
635 +
636 +923.2 - SF10BW125 (RX2)
637 +
638 +
639 +
640 +=== 2.7.6 KR920-923 (KR920) ===
641 +
642 +Default channel:
643 +
644 +922.1 - SF7BW125 to SF12BW125
645 +
646 +922.3 - SF7BW125 to SF12BW125
647 +
648 +922.5 - SF7BW125 to SF12BW125
649 +
650 +
651 +(% style="color:#037691" %)**Uplink: (OTAA mode, channel added by JoinAccept message)**
652 +
653 +922.1 - SF7BW125 to SF12BW125
654 +
655 +922.3 - SF7BW125 to SF12BW125
656 +
657 +922.5 - SF7BW125 to SF12BW125
658 +
659 +922.7 - SF7BW125 to SF12BW125
660 +
661 +922.9 - SF7BW125 to SF12BW125
662 +
663 +923.1 - SF7BW125 to SF12BW125
664 +
665 +923.3 - SF7BW125 to SF12BW125
666 +
667 +
668 +(% style="color:#037691" %)**Downlink:**
669 +
670 +Uplink channels 1-7(RX1)
671 +
672 +921.9 - SF12BW125 (RX2 downlink only; SF12BW125 might be changed to SF9BW125)
673 +
674 +
675 +
676 +=== 2.7.7 IN865-867 (IN865) ===
677 +
678 +(% style="color:#037691" %)** Uplink:**
679 +
680 +865.0625 - SF7BW125 to SF12BW125
681 +
682 +865.4025 - SF7BW125 to SF12BW125
683 +
684 +865.9850 - SF7BW125 to SF12BW125
685 +
686 +
687 +(% style="color:#037691" %) **Downlink:**
688 +
689 +Uplink channels 1-3 (RX1)
690 +
691 +866.550 - SF10BW125 (RX2)
692 +
693 +
694 +
695 +
696 +== 2.8 LED Indicator ==
697 +
698 +The LSE01 has an internal LED which is to show the status of different state.
699 +
700 +* Blink once when device power on.
701 +* Solid ON for 5 seconds once device successful Join the network.
702 +* Blink once when device transmit a packet.
703 +
704 +== 2.9 Installation in Soil ==
705 +
706 +**Measurement the soil surface**
707 +
708 +
709 +[[image:1654506634463-199.png]] ​
710 +
655 655  (((
656 -The NSE01 battery is a combination of an 8500mAh Li/SOCI2 Battery and a Super Capacitor. The battery is none-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
712 +(((
713 +Choose the proper measuring position. Avoid the probe to touch rocks or hard things. Split the surface soil according to the measured deep. Keep the measured as original density. Vertical insert the probe into the soil to be measured. Make sure not shake when inserting.
657 657  )))
715 +)))
658 658  
659 659  
718 +
719 +[[image:1654506665940-119.png]]
720 +
660 660  (((
661 -The battery is designed to last for several years depends on the actually use environment and update interval. 
722 +Dig a hole with diameter > 20CM.
662 662  )))
663 663  
725 +(((
726 +Horizontal insert the probe to the soil and fill the hole for long term measurement.
727 +)))
664 664  
729 +
730 +== 2.10 ​Firmware Change Log ==
731 +
665 665  (((
666 -The battery related documents as below:
733 +**Firmware download link:**
667 667  )))
668 668  
669 -* [[Battery Dimension>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
670 -* [[Lithium-Thionyl Chloride Battery datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
671 -* [[Lithium-ion Battery-Capacitor datasheet>>http://www.dragino.com/downloads/index.php?dir=datasheet/Battery/ER26500/]]
736 +(((
737 +[[http:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/>>url:http://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/Firmware/]]
738 +)))
672 672  
673 673  (((
674 -[[image:image-20220708140453-6.png]]
741 +
675 675  )))
676 676  
744 +(((
745 +**Firmware Upgrade Method: **[[Firmware Upgrade Instruction>>doc:Main.Firmware Upgrade Instruction for STM32 base products.WebHome]]
746 +)))
677 677  
748 +(((
749 +
750 +)))
678 678  
679 -=== 2.9.2  Power consumption Analyze ===
752 +(((
753 +**V1.0.**
754 +)))
680 680  
681 681  (((
682 -Dragino battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
757 +Release
683 683  )))
684 684  
685 685  
761 +== 2.11 ​Battery Analysis ==
762 +
763 +=== 2.11.1 ​Battery Type ===
764 +
686 686  (((
687 -Instruction to use as below:
766 +The LSE01 battery is a combination of a 4000mAh Li/SOCI2 Battery and a Super Capacitor. The battery is non-rechargeable battery type with a low discharge rate (<2% per year). This type of battery is commonly used in IoT devices such as water meter.
688 688  )))
689 689  
690 690  (((
691 -(% style="color:blue" %)**Step 1:  **(%%)Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/Battery_Analyze/]]
770 +The battery is designed to last for more than 5 years for the LSN50.
692 692  )))
693 693  
694 -
695 695  (((
696 -(% style="color:blue" %)**Step 2: **(%%) Open it and choose
774 +(((
775 +The battery-related documents are as below:
697 697  )))
777 +)))
698 698  
699 699  * (((
700 -Product Model
780 +[[Battery Dimension>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
701 701  )))
702 702  * (((
703 -Uplink Interval
783 +[[Lithium-Thionyl Chloride Battery  datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]],
704 704  )))
705 705  * (((
706 -Working Mode
786 +[[Lithium-ion Battery-Capacitor datasheet>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]], [[Tech Spec>>https://www.dragino.com/downloads/index.php?dir=datasheet/Battery/]]
707 707  )))
708 708  
709 -(((
710 -And the Life expectation in difference case will be shown on the right.
711 -)))
789 + [[image:image-20220610172436-1.png]]
712 712  
713 -[[image:image-20220708141352-7.jpeg]]
714 714  
715 715  
793 +=== 2.11.2 ​Battery Note ===
716 716  
717 -=== 2.9.3  ​Battery Note ===
718 -
719 719  (((
720 720  The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
721 721  )))
... ... @@ -722,176 +722,302 @@
722 722  
723 723  
724 724  
725 -=== 2.9.4  Replace the battery ===
801 +=== 2.11.3 Replace the battery ===
726 726  
727 727  (((
728 -The default battery pack of NSE01 includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence without the SPC1520 capacitor, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes).
804 +If Battery is lower than 2.7v, user should replace the battery of LSE01.
729 729  )))
730 730  
731 -
732 -
733 -= 3. ​ Access NB-IoT Module =
734 -
735 735  (((
736 -Users can directly access the AT command set of the NB-IoT module.
808 +You can change the battery in the LSE01.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won’t be voltage drop between battery and main board.
737 737  )))
738 738  
739 739  (((
740 -The AT Command set can refer the BC35-G NB-IoT Module AT Command: [[https:~~/~~/www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/>>url:https://www.dragino.com/downloads/index.php?dir=datasheet/other_vendors/BC35-G/]] 
812 +The default battery pack of LSE01 includes a ER18505 plus super capacitor. If user can’t find this pack locally, they can find ER18505 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
741 741  )))
742 742  
743 -[[image:1657261278785-153.png]]
744 744  
745 745  
817 += 3. ​Using the AT Commands =
746 746  
747 -= 4.  Using the AT Commands =
819 +== 3.1 Access AT Commands ==
748 748  
749 -== 4.1  Access AT Commands ==
750 750  
751 -See this link for detail: [[http:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NSE01/>>url:http://www.dragino.com/downloads/index.php?dir=NB-IoT/NBSN50/]]
822 +LSE01 supports AT Command set in the stock firmware. You can use a USB to TTL adapter to connect to LSE01 for using AT command, as below.
752 752  
824 +[[image:1654501986557-872.png||height="391" width="800"]]
753 753  
754 -AT+<CMD>?  : Help on <CMD>
755 755  
756 -AT+<CMD>         : Run <CMD>
827 +Or if you have below board, use below connection:
757 757  
758 -AT+<CMD>=<value> : Set the value
759 759  
760 -AT+<CMD>=?  : Get the value
830 +[[image:1654502005655-729.png||height="503" width="801"]]
761 761  
762 762  
833 +
834 +In the PC, you need to set the serial baud rate to (% style="color:green" %)**9600**(%%) to access the serial console for LSE01. LSE01 will output system info once power on as below:
835 +
836 +
837 + [[image:1654502050864-459.png||height="564" width="806"]]
838 +
839 +
840 +Below are the available commands, a more detailed AT Command manual can be found at [[AT Command Manual>>https://www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0]]: [[https:~~/~~/www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0>>https://www.dropbox.com/sh/qr6vproz4z4kzjz/AAAD48h3OyWrU1hq_Cqm8jIwa?dl=0]]
841 +
842 +
843 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>? **(%%) : Help on <CMD>
844 +
845 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD> **(%%) : Run <CMD>
846 +
847 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=<value>**(%%) : Set the value
848 +
849 +(% style="background-color:#dcdcdc" %)**AT+<CMD>=?AT+<CMD>=?**(%%)  : Get the value
850 +
851 +
763 763  (% style="color:#037691" %)**General Commands**(%%)      
764 764  
765 -AT  : Attention       
854 +(% style="background-color:#dcdcdc" %)**AT**(%%)  : Attention       
766 766  
767 -AT?  : Short Help     
856 +(% style="background-color:#dcdcdc" %)**AT?**(%%)  : Short Help     
768 768  
769 -ATZ  : MCU Reset    
858 +(% style="background-color:#dcdcdc" %)**ATZ**(%%)  : MCU Reset    
770 770  
771 -AT+TDC  : Application Data Transmission Interval
860 +(% style="background-color:#dcdcdc" %)**AT+TDC**(%%)  : Application Data Transmission Interval 
772 772  
773 -AT+CFG  : Print all configurations
774 774  
775 -AT+CFGMOD           : Working mode selection
863 +(% style="color:#037691" %)**Keys, IDs and EUIs management**
776 776  
777 -AT+INTMOD            : Set the trigger interrupt mode
865 +(% style="background-color:#dcdcdc" %)**AT+APPEUI**(%%)              : Application EUI      
778 778  
779 -AT+5VT  : Set extend the time of 5V power  
867 +(% style="background-color:#dcdcdc" %)**AT+APPKEY**(%%)              : Application Key     
780 780  
781 -AT+PRO  : Choose agreement
869 +(% style="background-color:#dcdcdc" %)**AT+APPSKEY**(%%)            : Application Session Key
782 782  
783 -AT+WEIGRE  : Get weight or set weight to 0
871 +(% style="background-color:#dcdcdc" %)**AT+DADDR**(%%)              : Device Address     
784 784  
785 -AT+WEIGAP  : Get or Set the GapValue of weight
873 +(% style="background-color:#dcdcdc" %)**AT+DEUI**(%%)                   : Device EUI     
786 786  
787 -AT+RXDL  : Extend the sending and receiving time
875 +(% style="background-color:#dcdcdc" %)**AT+NWKID**(%%)               : Network ID (You can enter this command change only after successful network connection) 
788 788  
789 -AT+CNTFAC  : Get or set counting parameters
877 +(% style="background-color:#dcdcdc" %)**AT+NWKSKEY**(%%)          : Network Session Key Joining and sending date on LoRa network  
790 790  
791 -AT+SERVADDR  : Server Address
879 +(% style="background-color:#dcdcdc" %)**AT+CFM**(%%)  : Confirm Mode       
792 792  
881 +(% style="background-color:#dcdcdc" %)**AT+CFS**(%%)                     : Confirm Status       
793 793  
794 -(% style="color:#037691" %)**COAP Management**      
883 +(% style="background-color:#dcdcdc" %)**AT+JOIN**(%%)  : Join LoRa? Network       
795 795  
796 -AT+URI            : Resource parameters
885 +(% style="background-color:#dcdcdc" %)**AT+NJM**(%%)  : LoRa? Network Join Mode    
797 797  
887 +(% style="background-color:#dcdcdc" %)**AT+NJS**(%%)                     : LoRa? Network Join Status    
798 798  
799 -(% style="color:#037691" %)**UDP Management**
889 +(% style="background-color:#dcdcdc" %)**AT+RECV**(%%)                  : Print Last Received Data in Raw Format
800 800  
801 -AT+CFM          : Upload confirmation mode (only valid for UDP)
891 +(% style="background-color:#dcdcdc" %)**AT+RECVB**(%%)                : Print Last Received Data in Binary Format      
802 802  
893 +(% style="background-color:#dcdcdc" %)**AT+SEND**(%%)                  : Send Text Data      
803 803  
804 -(% style="color:#037691" %)**MQTT Management**
895 +(% style="background-color:#dcdcdc" %)**AT+SENB**(%%)                  : Send Hexadecimal Data
805 805  
806 -AT+CLIENT               : Get or Set MQTT client
807 807  
808 -AT+UNAME  : Get or Set MQTT Username
898 +(% style="color:#037691" %)**LoRa Network Management**
809 809  
810 -AT+PWD                  : Get or Set MQTT password
900 +(% style="background-color:#dcdcdc" %)**AT+ADR**(%%)          : Adaptive Rate
811 811  
812 -AT+PUBTOPIC  : Get or Set MQTT publish topic
902 +(% style="background-color:#dcdcdc" %)**AT+CLASS**(%%)  : LoRa Class(Currently only support class A
813 813  
814 -AT+SUBTOPIC  : Get or Set MQTT subscription topic
904 +(% style="background-color:#dcdcdc" %)**AT+DCS**(%%)  : Duty Cycle Setting 
815 815  
906 +(% style="background-color:#dcdcdc" %)**AT+DR**(%%)  : Data Rate (Can Only be Modified after ADR=0)     
816 816  
817 -(% style="color:#037691" %)**Information**          
908 +(% style="background-color:#dcdcdc" %)**AT+FCD**(%%)  : Frame Counter Downlink       
818 818  
819 -AT+FDR  : Factory Data Reset
910 +(% style="background-color:#dcdcdc" %)**AT+FCU**(%%)  : Frame Counter Uplink   
820 820  
821 -AT+PWORD  : Serial Access Password
912 +(% style="background-color:#dcdcdc" %)**AT+JN1DL**(%%)  : Join Accept Delay1
822 822  
914 +(% style="background-color:#dcdcdc" %)**AT+JN2DL**(%%)  : Join Accept Delay2
823 823  
916 +(% style="background-color:#dcdcdc" %)**AT+PNM**(%%)  : Public Network Mode   
824 824  
825 -= ​5.  FAQ =
918 +(% style="background-color:#dcdcdc" %)**AT+RX1DL**(%%)  : Receive Delay1      
826 826  
827 -== 5.1 ​ How to Upgrade Firmware ==
920 +(% style="background-color:#dcdcdc" %)**AT+RX2DL**(%%)  : Receive Delay2      
828 828  
922 +(% style="background-color:#dcdcdc" %)**AT+RX2DR**(%%)  : Rx2 Window Data Rate 
829 829  
924 +(% style="background-color:#dcdcdc" %)**AT+RX2FQ**(%%)  : Rx2 Window Frequency
925 +
926 +(% style="background-color:#dcdcdc" %)**AT+TXP**(%%)  : Transmit Power
927 +
928 +(% style="background-color:#dcdcdc" %)**AT+ MOD**(%%)  : Set work mode
929 +
930 +
931 +(% style="color:#037691" %)**Information** 
932 +
933 +(% style="background-color:#dcdcdc" %)**AT+RSSI**(%%)           : RSSI of the Last Received Packet   
934 +
935 +(% style="background-color:#dcdcdc" %)**AT+SNR**(%%)           : SNR of the Last Received Packet   
936 +
937 +(% style="background-color:#dcdcdc" %)**AT+VER**(%%)           : Image Version and Frequency Band       
938 +
939 +(% style="background-color:#dcdcdc" %)**AT+FDR**(%%)           : Factory Data Reset
940 +
941 +(% style="background-color:#dcdcdc" %)**AT+PORT**(%%)  : Application Port    
942 +
943 +(% style="background-color:#dcdcdc" %)**AT+CHS**(%%)  : Get or Set Frequency (Unit: Hz) for Single Channel Mode
944 +
945 + (% style="background-color:#dcdcdc" %)**AT+CHE**(%%)  : Get or Set eight channels mode, Only for US915, AU915, CN470
946 +
947 +
948 += ​4. FAQ =
949 +
950 +== 4.1 ​How to change the LoRa Frequency Bands/Region? ==
951 +
830 830  (((
831 -User can upgrade the firmware for 1) bug fix, 2) new feature release.
953 +You can follow the instructions for [[how to upgrade image>>||anchor="H2.10200BFirmwareChangeLog"]].
954 +When downloading the images, choose the required image file for download. ​
832 832  )))
833 833  
834 834  (((
835 -Please see this link for how to upgrade:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList>>http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H2.HardwareUpgradeMethodSupportList]]
958 +
836 836  )))
837 837  
838 838  (((
839 -(% style="color:red" %)Notice, NSE01 and LSE01 share the same mother board. They use the same connection and method to update.
962 +How to set up LSE01 to work in 8 channel mode By default, the frequency bands US915, AU915, CN470 work in 72 frequencies. Many gateways are 8 channel gateways, and in this case, the OTAA join time and uplink schedule is long and unpredictable while the end node is hopping in 72 frequencies.
840 840  )))
841 841  
965 +(((
966 +
967 +)))
842 842  
969 +(((
970 +You can configure the end node to work in 8 channel mode by using the AT+CHE command. The 500kHz channels are always included for OTAA.
971 +)))
843 843  
844 -== 5.2  Can I calibrate NSE01 to different soil types? ==
973 +(((
974 +
975 +)))
845 845  
846 846  (((
847 -NSE01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>https://www.dragino.com/downloads/downloads/LoRa_End_Node/LSE01/Calibrate_to_other_Soil_20220605.pdf]].
978 +For example, in **US915** band, the frequency table is as below. By default, the end node will use all channels (0~~71) for OTAA Join process. After the OTAA Join, the end node will use these all channels (0~~71) to send uplink packets.
848 848  )))
849 849  
981 +[[image:image-20220606154726-3.png]]
850 850  
851 -= 6.  Trouble Shooting =
852 852  
853 -== 6.1  ​Connection problem when uploading firmware ==
984 +When you use the TTN network, the US915 frequency bands use are:
854 854  
986 +* 903.9 - SF7BW125 to SF10BW125
987 +* 904.1 - SF7BW125 to SF10BW125
988 +* 904.3 - SF7BW125 to SF10BW125
989 +* 904.5 - SF7BW125 to SF10BW125
990 +* 904.7 - SF7BW125 to SF10BW125
991 +* 904.9 - SF7BW125 to SF10BW125
992 +* 905.1 - SF7BW125 to SF10BW125
993 +* 905.3 - SF7BW125 to SF10BW125
994 +* 904.6 - SF8BW500
855 855  
856 856  (((
857 -**Please see: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20Upgrade%20Instruction%20for%20STM32%20base%20products/#H3.3Troubleshooting]]
997 +Because the end node is now hopping in 72 frequency, it makes it difficult for the devices to Join the TTN network and uplink data. To solve this issue, you can access the device via the AT commands and run:
998 +
999 +* (% style="color:#037691" %)**AT+CHE=2**
1000 +* (% style="color:#037691" %)**ATZ**
858 858  )))
859 859  
860 -(% class="wikigeneratedid" %)
861 861  (((
862 862  
1005 +
1006 +to set the end node to work in 8 channel mode. The device will work in Channel 8-15 & 64-71 for OTAA, and channel 8-15 for Uplink.
863 863  )))
864 864  
1009 +(((
1010 +
1011 +)))
865 865  
866 -== 6.2  AT Command input doesn't work ==
1013 +(((
1014 +The **AU915** band is similar. Below are the AU915 Uplink Channels.
1015 +)))
867 867  
1017 +[[image:image-20220606154825-4.png]]
1018 +
1019 +
1020 +== 4.2 ​Can I calibrate LSE01 to different soil types? ==
1021 +
1022 +LSE01 is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform base on the value measured by saline-alkali soil and loamy soil. The formula can be found at [[this link>>https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSE01/&file=Calibrate_to_other_Soil_20220605.pdf]].
1023 +
1024 +
1025 += 5. Trouble Shooting =
1026 +
1027 +== 5.1 ​Why I can't join TTN in US915 / AU915 bands? ==
1028 +
1029 +It is due to channel mapping. Please see the [[Eight Channel Mode>>doc:Main.End Device AT Commands and Downlink Command.WebHome||anchor="H7.19EightChannelMode"]] section above for details.
1030 +
1031 +
1032 +== 5.2 AT Command input doesn't work ==
1033 +
868 868  (((
869 869  In the case if user can see the console output but can't type input to the device. Please check if you already include the (% style="color:green" %)**ENTER**(%%) while sending out the command. Some serial tool doesn't send (% style="color:green" %)**ENTER**(%%) while press the send key, user need to add ENTER in their string.
1036 +)))
870 870  
871 -
1038 +
1039 +== 5.3 Device rejoin in at the second uplink packet ==
1040 +
1041 +(% style="color:#4f81bd" %)**Issue describe as below:**
1042 +
1043 +[[image:1654500909990-784.png]]
1044 +
1045 +
1046 +(% style="color:#4f81bd" %)**Cause for this issue:**
1047 +
1048 +(((
1049 +The fuse on LSE01 is not large enough, some of the soil probe require large current up to 5v 800mA, in a short pulse. When this happen, it cause the device reboot so user see rejoin.
872 872  )))
873 873  
874 874  
875 -= 7. ​ Order Info =
1053 +(% style="color:#4f81bd" %)**Solution: **
876 876  
1055 +All new shipped LSE01 after 2020-May-30 will have this to fix. For the customer who see this issue, please bypass the fuse as below:
877 877  
878 -Part Number**:** (% style="color:#4f81bd" %)**NSE01**
1057 +[[image:1654500929571-736.png||height="458" width="832"]]
879 879  
880 880  
1060 += 6. ​Order Info =
1061 +
1062 +
1063 +Part Number**:** (% style="color:#4f81bd" %)**LSE01-XX-YY**
1064 +
1065 +
1066 +(% style="color:#4f81bd" %)**XX**(%%)**:** The default frequency band
1067 +
1068 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1069 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1070 +* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1071 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1072 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1073 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1074 +* (% style="color:red" %)**IN865**(%%):  LoRaWAN IN865 band
1075 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1076 +
1077 +(% style="color:#4f81bd" %)**YY**(%%)**: **Battery Option
1078 +
1079 +* (% style="color:red" %)**4**(%%): 4000mAh battery
1080 +* (% style="color:red" %)**8**(%%): 8500mAh battery
1081 +
881 881  (% class="wikigeneratedid" %)
882 882  (((
883 883  
884 884  )))
885 885  
886 -= 8.  Packing Info =
1087 += 7. Packing Info =
887 887  
888 888  (((
889 889  
890 890  
891 891  (% style="color:#037691" %)**Package Includes**:
1093 +)))
892 892  
893 -* NSE01 NB-IoT Soil Moisture & EC Sensor x 1
894 -* External antenna x 1
1095 +* (((
1096 +LSE01 LoRaWAN Soil Moisture & EC Sensor x 1
895 895  )))
896 896  
897 897  (((
... ... @@ -898,19 +898,24 @@
898 898  
899 899  
900 900  (% style="color:#037691" %)**Dimension and weight**:
1103 +)))
901 901  
902 -* Size: 195 x 125 x 55 mm
903 -* Weight:   420g
1105 +* (((
1106 +Device Size: cm
904 904  )))
1108 +* (((
1109 +Device Weight: g
1110 +)))
1111 +* (((
1112 +Package Size / pcs : cm
1113 +)))
1114 +* (((
1115 +Weight / pcs : g
905 905  
906 -(((
907 907  
908 -
909 -
910 -
911 911  )))
912 912  
913 -= 9.  Support =
1120 += 8. Support =
914 914  
915 915  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
916 916  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1657249419225-449.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -81.0 KB
Content
1657249468462-536.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -483.6 KB
Content
1657249793983-486.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -85.8 KB
Content
1657249831934-534.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -72.5 KB
Content
1657249864775-321.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -87.0 KB
Content
1657249930215-289.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.3 KB
Content
1657249978444-674.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -139.5 KB
Content
1657249990869-686.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -96.9 KB
Content
1657250217799-140.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -98.7 KB
Content
1657250255956-604.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -99.0 KB
Content
1657259653666-883.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -344.4 KB
Content
1657260785982-288.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -138.2 KB
Content
1657261119050-993.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -126.1 KB
Content
1657261278785-153.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -126.1 KB
Content
1657271519014-786.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -71.5 KB
Content
1657327959271-447.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -78.3 KB
Content
image-20220708110657-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -251.7 KB
Content
image-20220708111918-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -38.8 KB
Content
image-20220708133731-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -8.7 KB
Content
image-20220708140453-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -132.7 KB
Content
image-20220708141352-7.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -102.7 KB
Content
image-20220709084038-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -72.0 KB
Content
image-20220709084137-2.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -72.0 KB
Content
image-20220709084207-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -72.0 KB
Content
image-20220709084458-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -199.5 KB
Content
image-20220709085040-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -200.4 KB
Content