Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -102,20 +102,28 @@
102	102
103	103
104	104
105		-= 2. Configure LSE01 to connect to LoRaWAN network =
	105	+= 2.  Use NSE01 to communicate with IoT Server =
106	106
107		-== 2.1 How it works ==
	107	+== 2.1  How it works ==
108	108
	109	+
109	109	(((
110		-The LSE01 is configured as LoRaWAN OTAA Class A mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and power on the LSE0150. It will automatically join the network via OTAA and start to send the sensor value
	111	+The NSE01 is equipped with a NB-IoT module, the pre-loaded firmware in NSE01 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by NSE01.
111	111	)))
112	112
	114	+
113	113	(((
114		-In case you can’t set the OTAA keys in the LoRaWAN OTAA server, and you have to use the keys from the server, you can [[use AT Commands >>||anchor="H3.200BUsingtheATCommands"]].
	116	+The diagram below shows the working flow in default firmware of NSE01:
115	115	)))
116	116
	119	+[[image:image-20220708101605-2.png]]
117	117
	121	+(((
	122	+
	123	+)))
118	118
	125	+
	126	+
119	119	== 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
120	120
121	121	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LG308>>url:http://www.dragino.com/products/lora/item/140-lg308.html]] as a LoRaWAN gateway in this example.