Last modified by Mengting Qiu on 2024/04/02 16:44
<
From version < 97.3 >
edited by Xiaoling
on 2022/07/09 11:10
To version < 108.1 >
edited by Xiaoling
on 2022/07/09 15:39
>
Change comment: Uploaded new attachment "1657352391268-297.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -NDDS75 NB-IoT Distance Detect Sensor User Manual
1 +N95S31B NB-IoT Temperature & Humidity Sensor User Manual
Content
... ... @@ -1,58 +1,55 @@
1 1  (% style="text-align:center" %)
2 -[[image:image-20220709085040-1.png||height="542" width="524"]]
2 +[[image:1657348034241-728.png||height="470" width="470"]]
3 3  
4 4  
5 5  
6 6  
7 7  
8 -**Table of Contents:**
9 9  
10 -{{toc/}}
11 11  
10 +**Table of Contents:**
12 12  
13 13  
14 14  
15 15  
16 16  
16 +
17 17  = 1.  Introduction =
18 18  
19 -== 1.1 ​ What is NDDS75 Distance Detection Sensor ==
19 +== 1.1 ​ What is N95S31B NB-IoT Sensor Node ==
20 20  
21 21  (((
22 22  
23 23  
24 -(((
25 -The Dragino NDDS75 is a (% style="color:blue" %)**NB-IoT Distance Detection Sensor**(%%) for Internet of Things solution. It is designed to measure the distance between the sensor and a flat object. The distance detection sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
26 -\\The NDDS75 can be applied to scenarios such as horizontal distance measurement, liquid level measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, bottom water level monitoring, etc. It detects the distance between the measured object and the sensor, and uploads the value via wireless to IoT Server via NB-IoT Network.
27 -\\NarrowBand-Internet of Things (NB-IoT) is a standards-based low power wide area (LPWA) technology developed to enable a wide range of new IoT devices and services. NB-IoT significantly improves the power consumption of user devices, system capacity and spectrum efficiency, especially in deep coverage.
28 -\\NDDS75 supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP** (%%)for different application requirement.
29 -\\NDDS75 is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to 5 years. (Actually Battery life depends on the use environment, update period & uplink method)
30 -\\To use NDDS75, user needs to check if there is NB-IoT coverage in local area and with the bands NDDS75 supports. If the local operate support it, user needs to get a NB-IoT SIM card from local operator and install NDDS75 to get NB-IoT network connection.
31 -)))
24 +The Dragino N95S31B is a (% style="color:blue" %)**NB-IoT Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via NB-IoT network*.
32 32  
33 -
34 -)))
26 +The temperature & humidity sensor used in N95S31B is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing **(%%)for long term use.
35 35  
36 -[[image:1654503236291-817.png]]
28 +N95S31B supports different uplink methods include (% style="color:blue" %)**TCP, MQTT, UDP and CoAP**(%%) for different application requirement.
37 37  
30 +N95S31B is powered by(% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), It is designed for long term use up to several years. (Real-world battery life depends on the use environment, update period. Please check related Power Analyze report).
38 38  
39 -[[image:1657327959271-447.png]]
40 40  
33 +~* make sure you have NB-IoT coverage locally.
41 41  
35 +
36 +)))
42 42  
38 +[[image:1657348284168-431.png]]
39 +
40 +
41 +
43 43  == 1.2 ​ Features ==
44 44  
45 45  
46 46  * NB-IoT Bands: B1/B3/B8/B5/B20/B28 @H-FDD
47 -* Ultra low power consumption
48 -* Distance Detection by Ultrasonic technology
49 -* Flat object range 280mm - 7500mm
50 -* Accuracy: ±(1cm+S*0.3%) (S: Distance)
51 -* Cable Length: 25cm
46 +* Monitor Temperature & Humidity via SHT31
52 52  * AT Commands to change parameters
53 53  * Uplink on periodically
54 54  * Downlink to change configure
55 55  * IP66 Waterproof Enclosure
51 +* Ultra-Low Power consumption
52 +* AT Commands to change parameters
56 56  * Micro SIM card slot for NB-IoT SIM
57 57  * 8500mAh Battery for long term use
58 58  
... ... @@ -77,6 +77,7 @@
77 77  
78 78  (% style="color:#037691" %)**Battery:**
79 79  
77 +
80 80  * Li/SOCI2 un-chargeable battery
81 81  * Capacity: 8500mAh
82 82  * Self Discharge: <1% / Year @ 25°C
... ... @@ -83,13 +83,8 @@
83 83  * Max continuously current: 130mA
84 84  * Max boost current: 2A, 1 second
85 85  
86 -(% style="color:#037691" %)**Power Consumption**
87 87  
88 -* STOP Mode: 10uA @ 3.3v
89 -* Max transmit power: [[350mA@3.3v>>mailto:350mA@3.3v]]
90 90  
91 -
92 -
93 93  == ​1.4  Applications ==
94 94  
95 95  * Smart Buildings & Home Automation
... ... @@ -105,22 +105,53 @@
105 105  
106 106  == 1.5  Pin Definitions ==
107 107  
101 +N95S31B use the mother board from NBSN95 which as below.
108 108  
109 -[[image:1657328609906-564.png]]
103 +[[image:image-20220709144723-1.png]]
110 110  
111 111  
106 +=== 1.5.1 Jumper JP2 ===
112 112  
113 -= 2.  Use NDDS75 to communicate with IoT Server =
108 +Power on Device when put this jumper.
114 114  
110 +
111 +
112 +=== 1.5.2 BOOT MODE / SW1 ===
113 +
114 +1) ISP: upgrade mode, device won't have any signal in this mode. but ready for upgrade firmware. LED won't work. Firmware won't run.
115 +
116 +2) Flash: work mode, device starts to work and send out console output for further debug
117 +
118 +
119 +
120 +=== 1.5.3 Reset Button ===
121 +
122 +Press to reboot the device.
123 +
124 +
125 +
126 +=== 1.5.4 LED ===
127 +
128 +It will flash:
129 +
130 +1. When boot the device in flash mode
131 +1. Send an uplink packet
132 +
133 +
134 +
135 +
136 += 2.  Use N95S31B to communicate with IoT Server =
137 +
115 115  == 2.1  How it works ==
116 116  
140 +
117 117  (((
118 -The NDDS75 is equipped with a NB-IoT module, the pre-loaded firmware in NDDS75 will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by NDDS75.
142 +The N95S31B is equipped with a NB-IoT module, the pre-loaded firmware in N95S31B will get environment data from sensors and send the value to local NB-IoT network via the NB-IoT module.  The NB-IoT network will forward this value to IoT server via the protocol defined by N95S31B.
119 119  )))
120 120  
121 121  
122 122  (((
123 -The diagram below shows the working flow in default firmware of NDDS75:
147 +The diagram below shows the working flow in default firmware of N95S31B:
124 124  )))
125 125  
126 126  (((
... ... @@ -127,7 +127,7 @@
127 127  
128 128  )))
129 129  
130 -[[image:1657328659945-416.png]]
154 +[[image:1657350248151-650.png]]
131 131  
132 132  (((
133 133  
... ... @@ -134,30 +134,46 @@
134 134  )))
135 135  
136 136  
137 -== 2.2 ​ Configure the NDDS75 ==
161 +== 2.2 ​ Configure the N95S31B ==
138 138  
139 139  
164 +=== 2.2.1  Power On N95S31B ===
165 +
166 +
167 +[[image:image-20220709150546-2.png]]
168 +
169 +
140 140  === 2.2.1 Test Requirement ===
141 141  
142 -(((
143 -To use NDDS75 in your city, make sure meet below requirements:
144 -)))
145 145  
173 +To use N95S31B in your city, make sure meet below requirements:
174 +
146 146  * Your local operator has already distributed a NB-IoT Network there.
147 -* The local NB-IoT network used the band that NSE01 supports.
176 +* The local NB-IoT network used the band that N95S31B supports.
148 148  * Your operator is able to distribute the data received in their NB-IoT network to your IoT server.
149 149  
179 +
180 +Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.
181 +
182 +N95S31B supports different communication protocol such as :
183 +
150 150  (((
151 -Below figure shows our testing structure. Here we have NB-IoT network coverage by China Mobile, the band they use is B8.  The NDDS75 will use CoAP((% style="color:red" %)120.24.4.116:5683)(%%) or raw UDP((% style="color:red" %)120.24.4.116:5601)(%%) or MQTT((% style="color:red" %)120.24.4.116:1883)(%%)or TCP((% style="color:red" %)120.24.4.116:5600)(%%)protocol to send data to the test server
152 -)))
185 +* CoAP  ((% style="color:red" %)120.24.4.116:5683(%%))
186 +* raw UDP  ((% style="color:red" %)120.24.4.116:5601(%%))
187 +* MQTT  ((% style="color:red" %)120.24.4.116:1883(%%))
188 +* TCP  ((% style="color:red" %)120.24.4.116:5600(%%))
153 153  
190 +We will show how to use with each protocol. The IP addresses above are our test server. User need to change to point their corresponding server.
154 154  
155 -[[image:1657328756309-230.png]]
192 +
193 +)))
156 156  
195 +[[image:1657350625843-586.png]]
157 157  
158 158  
159 -=== 2.2.2 Insert SIM card ===
160 160  
199 +=== 2.2.3  Insert SIM card ===
200 +
161 161  (((
162 162  Insert the NB-IoT Card get from your provider.
163 163  )))
... ... @@ -167,19 +167,19 @@
167 167  )))
168 168  
169 169  
170 -[[image:1657328884227-504.png]]
210 +[[image:1657351240556-536.png]]
171 171  
172 172  
173 173  
174 -=== 2.2.3 Connect USB – TTL to NDDS75 to configure it ===
214 +=== 2.2.4  Connect USB – TTL to N95S31B to configure it ===
175 175  
176 176  (((
177 177  (((
178 -User need to configure NDDS75 via serial port to set the (% style="color:blue" %)**Server Address** / **Uplink Topic** (%%)to define where and how-to uplink packets. NDDS75 support AT Commands, user can use a USB to TTL adapter to connect to NDDS75 and use AT Commands to configure it, as below.
218 +User need to configure N95S31B via serial port to set the (% style="color:blue" %)**Server Address** / **Uplink Topic** (%%)to define where and how-to uplink packets. N95S31B support AT Commands, user can use a USB to TTL adapter to connect to N95S31B and use AT Commands to configure it, as below.
179 179  )))
180 180  )))
181 181  
182 -[[image:image-20220709092052-2.png]]
222 +[[image:1657351312545-300.png]]
183 183  
184 184  **Connection:**
185 185  
... ... @@ -199,45 +199,59 @@
199 199  * Flow Control: (% style="color:green" %)**None**
200 200  
201 201  (((
202 -Make sure the switch is in FLASH position, then power on device by connecting the jumper on NDDS75. NDDS75 will output system info once power on as below, we can enter the (% style="color:green" %)**password: 12345678**(%%) to access AT Command input.
242 +Make sure the switch is in FLASH position, then power on device by connecting the jumper on N95S31B. N95S31B will output system info once power on as below, we can enter the (% style="color:green" %)**password: 12345678**(%%) to access AT Command input.
203 203  )))
204 204  
205 205  [[image:1657329814315-101.png]]
206 206  
207 207  (((
208 -(% style="color:red" %)Note: the valid AT Commands can be found at: (%%)[[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/]]
248 +(% style="color:red" %)Note: the valid AT Commands can be found at:  (%%)[[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/N95S31B/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/N95S31B/]]
209 209  )))
210 210  
211 211  
212 212  
213 -=== 2.2.4 Use CoAP protocol to uplink data ===
253 +=== 2.2.5  Use CoAP protocol to uplink data ===
214 214  
215 215  (% style="color:red" %)Note: if you don't have CoAP server, you can refer this link to set up one: (%%)[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/>>http://wiki.dragino.com/xwiki/bin/view/Main/Set%20up%20CoAP%20Server/]]
216 216  
217 217  
258 +(((
218 218  **Use below commands:**
260 +)))
219 219  
220 -* (% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
221 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
222 -* (% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
262 +* (((
263 +(% style="color:blue" %)**AT+PRO=1**  (%%) ~/~/ Set to use CoAP protocol to uplink
264 +)))
265 +* (((
266 +(% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5683   ** (%%)~/~/ to set CoAP server address and port
267 +)))
268 +* (((
269 +(% style="color:blue" %)**AT+URI=5,11,"mqtt",11,"coap",12,"0",15,"c=text1",23,"0" ** (%%) ~/~/Set COAP resource path
270 +)))
223 223  
272 +(((
273 +
274 +
224 224  For parameter description, please refer to AT command set
276 +)))
225 225  
226 -[[image:1657330452568-615.png]]
278 +[[image:1657352146020-183.png]]
227 227  
228 228  
281 +(((
229 229  After configure the server address and (% style="color:green" %)**reset the device**(%%) (via AT+ATZ ), NDDS75 will start to uplink sensor values to CoAP server.
283 +)))
230 230  
231 -[[image:1657330472797-498.png]]
285 +[[image:1657352185396-303.png]]
232 232  
233 233  
234 234  
235 -=== 2.2.5 Use UDP protocol to uplink data(Default protocol) ===
289 +=== 2.2.6  Use UDP protocol to uplink data(Default protocol) ===
236 236  
237 237  
238 -* (% style="color:blue" %)**AT+PRO=2   ** (%%) ~/~/ Set to use UDP protocol to uplink
292 +* (% style="color:blue" %)**AT+PRO=2   ** (%%) ~/~/ Set to use UDP protocol to uplink
239 239  * (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,5601   ** (%%) ~/~/ to set UDP server address and port
240 -* (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/If the server does not respond, this command is unnecessary
294 +* (% style="color:blue" %)**AT+CFM=1       ** (%%) ~/~/ If the server does not respond, this command is unnecessary
241 241  
242 242  [[image:1657330501006-241.png]]
243 243  
... ... @@ -249,11 +249,11 @@
249 249  === 2.2.6 Use MQTT protocol to uplink data ===
250 250  
251 251  
252 -* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
253 -* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
254 -* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
255 -* (% style="color:blue" %)**AT+UNAME=UNAME                               **(%%)~/~/Set the username of MQTT
256 -* (% style="color:blue" %)**AT+PWD=PWD                                        **(%%)~/~/Set the password of MQTT
306 +* (% style="color:blue" %)**AT+PRO=3   ** (%%) ~/~/Set to use MQTT protocol to uplink
307 +* (% style="color:blue" %)**AT+SERVADDR=120.24.4.116,1883   ** (%%) ~/~/Set MQTT server address and port
308 +* (% style="color:blue" %)**AT+CLIENT=CLIENT       ** (%%)~/~/Set up the CLIENT of MQTT
309 +* (% style="color:blue" %)**AT+UNAME=UNAME                                **(%%)~/~/Set the username of MQTT
310 +* (% style="color:blue" %)**AT+PWD=PWD                                         **(%%)~/~/Set the password of MQTT
257 257  * (% style="color:blue" %)**AT+PUBTOPIC=NDDS75_PUB                 **(%%)~/~/Set the sending topic of MQTT
258 258  * (% style="color:blue" %)**AT+SUBTOPIC=NDDS75_SUB          **(%%) ~/~/Set the subscription topic of MQTT
259 259  
... ... @@ -303,10 +303,10 @@
303 303  In this mode, uplink payload includes in total 14 bytes
304 304  
305 305  
306 -(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:510px" %)
307 -|=(% style="width: 80px;" %)(((
360 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:440px" %)
361 +|=(% style="width: 60px;" %)(((
308 308  **Size(bytes)**
309 -)))|=(% style="width: 80px;" %)**6**|=(% style="width: 35px;" %)2|=(% style="width: 35px;" %)**2**|=(% style="width: 110px;" %)**1**|=(% style="width: 110px;" %)**2**|=(% style="width: 70px;" %)**1**
363 +)))|=(% style="width: 60px;" %)**6**|=(% style="width: 35px;" %)2|=(% style="width: 35px;" %)**2**|=(% style="width: 80px;" %)**1**|=(% style="width: 100px;" %)**2**|=(% style="width: 60px;" %)**1**
310 310  |(% style="width:97px" %)**Value**|(% style="width:83px" %)[[Device ID>>||anchor="H2.4.1A0A0DeviceID"]]|(% style="width:41px" %)[[Ver>>||anchor="H2.4.2A0VersionInfo"]]|(% style="width:46px" %)[[BAT>>||anchor="H2.4.3A0BatteryInfo"]]|(% style="width:123px" %)[[Signal Strength>>||anchor="H2.4.4A0SignalStrength"]]|(% style="width:120px" %)[[Distance (unit: mm)>>||anchor="H2.4.5A0Distance"]]|(% style="width:80px" %)[[Interrupt>>||anchor="H2.4.6A0DigitalInterrupt"]]
311 311  
312 312  (((
... ... @@ -390,10 +390,6 @@
390 390  === 2.4.3  Battery Info ===
391 391  
392 392  (((
393 -Check the battery voltage for LSE01.
394 -)))
395 -
396 -(((
397 397  Ex1: 0x0B45 = 2885mV
398 398  )))
399 399  
... ... @@ -439,7 +439,9 @@
439 439  
440 440  Get the distance. Flat object range 280mm - 7500mm.
441 441  
492 +(((
442 442  For example, if the data you get from the register is **__0x0B 0x05__**, the distance between the sensor and the measured object is
494 +)))
443 443  
444 444  (((
445 445  (((
... ... @@ -582,7 +582,9 @@
582 582  == 2.7  ​Firmware Change Log ==
583 583  
584 584  
637 +(((
585 585  Download URL & Firmware Change log
639 +)))
586 586  
587 587  (((
588 588  [[https:~~/~~/www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/Firmware/>>url:https://www.dragino.com/downloads/index.php?dir=NB-IoT/NDDS75/Firmware/]]
... ... @@ -589,7 +589,9 @@
589 589  )))
590 590  
591 591  
646 +(((
592 592  Upgrade Instruction: [[Upgrade_Firmware>>||anchor="H5.1200BHowtoUpgradeFirmware"]]
648 +)))
593 593  
594 594  
595 595  
1657348034241-728.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +127.8 KB
Content
1657348284168-431.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +93.5 KB
Content
1657350248151-650.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +126.1 KB
Content
1657350625843-586.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +93.3 KB
Content
1657351240556-536.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +483.6 KB
Content
1657351312545-300.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +675.8 KB
Content
1657352146020-183.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +264.0 KB
Content
1657352185396-303.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +98.3 KB
Content
1657352391268-297.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +238.0 KB
Content
image-20220709144723-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +413.1 KB
Content
image-20220709150546-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +333.5 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0